[PATCH 1/3] ARM: integrator: put symbolic bus names on devices

[Linus Walleij]

All the Integrator devices have bus names like "mb:16" which
I think means "memory base 0x16000000" which is where the
UART0 is. So let's call it "uart0" because that's what most
platforms do these days.

Change this everywhere for the integrator as we prepare for
some core clock code movement.

Cc: Russell King <linux at arm.linux.org.uk>
Cc: Mike Turquette <mturquette at ti.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 arch/arm/mach-integrator/core.c          |   20 ++++++++++----------
 arch/arm/mach-integrator/integrator_cp.c |    8 ++++----
 2 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index eaf6c63..2a20bba 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -41,17 +41,17 @@ static struct amba_pl010_data integrator_uart_data;
 #define KMI0_IRQ		{ IRQ_KMIINT0 }
 #define KMI1_IRQ		{ IRQ_KMIINT1 }
 
-static AMBA_APB_DEVICE(rtc, "mb:15", 0,
+static AMBA_APB_DEVICE(rtc, "rtc", 0,
 	INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
 
-static AMBA_APB_DEVICE(uart0, "mb:16", 0,
+static AMBA_APB_DEVICE(uart0, "uart0", 0,
 	INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
 
-static AMBA_APB_DEVICE(uart1, "mb:17", 0,
+static AMBA_APB_DEVICE(uart1, "uart1", 0,
 	INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
 
-static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
-static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&rtc_device,
@@ -83,19 +83,19 @@ static struct clk_lookup lookups[] = {
 		.dev_id		= "ap_timer",
 		.clk		= &clk24mhz,
 	}, {	/* UART0 */
-		.dev_id		= "mb:16",
+		.dev_id		= "uart0",
 		.clk		= &uartclk,
 	}, {	/* UART1 */
-		.dev_id		= "mb:17",
+		.dev_id		= "uart1",
 		.clk		= &uartclk,
 	}, {	/* KMI0 */
-		.dev_id		= "mb:18",
+		.dev_id		= "kmi0",
 		.clk		= &clk24mhz,
 	}, {	/* KMI1 */
-		.dev_id		= "mb:19",
+		.dev_id		= "kmi1",
 		.clk		= &clk24mhz,
 	}, {	/* MMCI - IntegratorCP */
-		.dev_id		= "mb:1c",
+		.dev_id		= "mmci",
 		.clk		= &uartclk,
 	}
 };
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a56c536..a8c6480 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -221,7 +221,7 @@ static struct clk sp804_clk = {
 
 static struct clk_lookup cp_lookups[] = {
 	{	/* CLCD */
-		.dev_id		= "mb:c0",
+		.dev_id		= "clcd",
 		.clk		= &cp_auxclk,
 	}, {	/* SP804 timers */
 		.dev_id		= "sp804",
@@ -336,10 +336,10 @@ static struct mmci_platform_data mmc_data = {
 #define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
 #define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
 
-static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE,
+static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
 	INTEGRATOR_CP_MMC_IRQS, &mmc_data);
 
-static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE,
+static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
 	INTEGRATOR_CP_AACI_IRQS, NULL);
 
 
@@ -393,7 +393,7 @@ static struct clcd_board clcd_data = {
 	.remove		= versatile_clcd_remove_dma,
 };
 
-static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE,
+static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
 	{ IRQ_CP_CLCDCINT }, &clcd_data);
 
 static struct amba_device *amba_devs[] __initdata = {
-- 
1.7.7.6