[PATCH] ARM: dts: imx6q-sabrelite: add ecspi1 pinctrl support

[Hui Wang]

Imx6q sabrelite board uses ecspi1 to connect a spi flash sst25vf016b,
we need to add pinctrl information for it in the dts, otherwise the
ecspi1 driver can't work and the connected flash is wrongly
detected as a mr25h256 flash like this:

m25p80 spi32766.0: found mr25h256, expected sst25vf016b
m25p80 spi32766.0: mr25h256 (32 Kbytes)

Cc: Richard Zhao <richard.zhao at freescale.com>
Cc: Shawn Guo <shawn.guo at linaro.org>
Signed-off-by: Hui Wang <jason77.wang at gmail.com>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts | 2 ++
 arch/arm/boot/dts/imx6q.dtsi          | 9 +++++++++
 2 files changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index e0ec929..83a8f62 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -27,6 +27,8 @@
 				ecspi at 02008000 { /* eCSPI1 */
 					fsl,spi-num-chipselects = <1>;
 					cs-gpios = <&gpio3 19 0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_ecspi1_1>;
 					status = "okay";
 
 					flash: m25p80 at 0 {
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 8c90cba..ae8e7f2 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -538,6 +538,15 @@
 							    1517 0x17059>;	/* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
 					};
 				};
+
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <101 0x100b1		/* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
+							    109 0x100b1		/* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
+							    94  0x100b1		/* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+							    121 0x100b1>;	/* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+					};
+				};
 			};
 
 			dcic at 020e4000 { /* DCIC1 */
-- 
1.7.11