[PATCHv11 3/6] i2c: omap: Do not initialise the completion everytime

[ABRAHAM, KISHON VIJAY]

Hi,

On Thu, Jun 28, 2012 at 8:41 PM, Shubhrajyoti D <shubhrajyoti at ti.com> wrote:
> Use INIT_COMPLETION instead of init_completion in transfer.
>
> Reviewed-by: Felipe Balbi <balbi at ti.com>
> Signed-off-by: Shubhrajyoti D <shubhrajyoti at ti.com>
> ---
> - Add Felipe's reviewed-by tag
>
>  drivers/i2c/busses/i2c-omap.c |    3 ++-
>  1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index b9915bb..6d05f18 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -490,7 +490,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
>        w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR;
>        omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, w);
>
> -       init_completion(&dev->cmd_complete);
> +       INIT_COMPLETION(dev->cmd_complete);
>        dev->cmd_err = 0;
>
>        w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
> @@ -999,6 +999,7 @@ omap_i2c_probe(struct platform_device *pdev)
>        }
>
>        platform_set_drvdata(pdev, dev);
> +       init_completion(&dev->cmd_complete);
It should be INIT_COMPLETION here too.

Thanks
Kishon