[PATCH v12 0/2] MTD: at91: Add PMECC support for at91 nand flash driver

[Nicolas Ferre]

On 06/28/2012 10:21 AM, Josh Wu :
> Those patches is based on the l2-mtd.git three.
> 
> Since there are two patches of v11 already pushed, so this version v12 only includes the left two patches.
> which includes the modification according to Richard Genoud's review suggestion.
> 
> Changes since v11,
> 	add documentation for atmel nand reg parameter and one example for PMECC support.
> 	fix the bug: no error reported when fail to get resoures of PMECC ERRLOC or ROM.
> 	fix the bug: no correction when ecc data has bit flipped.
> 	add clearer debug information for data correction.
> 
> Josh Wu (2):
>   MTD: at91: add dt parameters for Atmel PMECC
>   MTD: at91: atmel_nand: Update driver to support Programmable Multibit
>     ECC controller
> 
>  .../devicetree/bindings/mtd/atmel-nand.txt         |   40 +-
>  drivers/mtd/nand/atmel_nand.c                      |  801 +++++++++++++++++++-
>  drivers/mtd/nand/atmel_nand_ecc.h                  |  114 ++-
>  3 files changed, 951 insertions(+), 4 deletions(-)

Nice work for making this append Josh!

Thanks, I will add my "Acked-by" line but I guess that it is not so
important as many people kindly already reviewed and tested the patch
series: a big thanks to all of you!

Best regards,
-- 
Nicolas Ferre