[PATCH 0/3] Add device tree support to AM33XX SoC

AnilKumar Ch anilkumar at ti.com
Fri Jun 22 05:40:46 EDT 2012

This patch series add device tree support for AM33XX SoC family.

Initialy Hiremath Vaibhav submitted a patch for AM33XX devices
based on omap3 family. Details at

AM33XX family is varied from omap3 family in these aspects
like memory maps, peripheral base addresses and configuration
parameters. In some cases we have to use a mix of omap3 and
omap4 parameters. So a seperate am33xx.dtsi file is created
for all the devices comes under am33xx family and revert of
above patch is required.

Two sepearte device tree source files are created (am335x-evm.dts
and am335x-bone.dts) to add support for AM335X EVM and BeagleBone

Linux booting is tested on AM335X-EVM and BeagleBone boards.

AnilKumar Ch (4):
  Revert "arm/dts: Add support for TI AM335x EVM board"
  arm/dts: Add initial DT support for AM33XX SoC family
  arm/dts: Add support for AM335x EVM
  arm/dts: Add support for AM335x BeagleBone

 .../devicetree/bindings/arm/omap/omap.txt          |    3 +
 arch/arm/boot/dts/am335x-bone.dts                  |   20 +++
 arch/arm/boot/dts/am335x-evm.dts                   |   25 +--
 arch/arm/boot/dts/am33xx.dtsi                      |  189 ++++++++++++++++++++
 4 files changed, 215 insertions(+), 22 deletions(-)
 create mode 100644 arch/arm/boot/dts/am335x-bone.dts
 create mode 100644 arch/arm/boot/dts/am33xx.dtsi


More information about the linux-arm-kernel mailing list