[PATCH 2/2] video: mxsfb: add simple device tree probe
Shawn Guo
shawn.guo at linaro.org
Tue Jun 26 05:02:59 EDT 2012
Add a simple device tree probe support for mxsfb driver. Before
a common binding for struct fb_videomode is available, the driver will
keep using struct mxsfb_platform_data. That said, platform code will
use auxdata to attach mxsfb_platform_data for device tree boot.
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
Documentation/devicetree/bindings/fb/mxsfb.txt | 21 ++++++++
drivers/video/mxsfb.c | 60 ++++++++++++++++++-----
2 files changed, 68 insertions(+), 13 deletions(-)
create mode 100644 Documentation/devicetree/bindings/fb/mxsfb.txt
diff --git a/Documentation/devicetree/bindings/fb/mxsfb.txt b/Documentation/devicetree/bindings/fb/mxsfb.txt
new file mode 100644
index 0000000..d4f8bdb
--- /dev/null
+++ b/Documentation/devicetree/bindings/fb/mxsfb.txt
@@ -0,0 +1,21 @@
+* Freescale MXS LCD Interface (LCDIF)
+
+Required properties:
+- compatible: Should be "fsl,<chip>-lcdif". Supported chips include
+ imx23 and imx28.
+- reg: Address and length of the register set for lcdif
+- interrupts: Should contain lcdif interrupts
+
+Optional properties:
+- panel-enable-gpios : Should specify the gpio for panel enable
+- enable-active-low : Polarity of panel enable gpio is active low.
+ If this property is missing, the default assumed is active high.
+
+Examples:
+
+lcdif at 80030000 {
+ compatible = "fsl,imx28-lcdif";
+ reg = <0x80030000 2000>;
+ interrupts = <38 86>;
+ panel-enable-gpios = <&gpio3 30 0>;
+};
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 08dad8d..588f00d 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -41,6 +41,8 @@
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
@@ -750,16 +752,42 @@ static void __devexit mxsfb_free_videomem(struct mxsfb_info *host)
}
}
+static struct platform_device_id mxsfb_devtype[] = {
+ {
+ .name = "imx23-fb",
+ .driver_data = MXSFB_V3,
+ }, {
+ .name = "imx28-fb",
+ .driver_data = MXSFB_V4,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, mxsfb_devtype);
+
+static const struct of_device_id mxsfb_dt_ids[] = {
+ { .compatible = "fsl,imx23-lcdif", .data = &mxsfb_devtype[0], },
+ { .compatible = "fsl,imx28-lcdif", .data = &mxsfb_devtype[1], },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxsfb_dt_ids);
+
static int __devinit mxsfb_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id =
+ of_match_device(mxsfb_dt_ids, &pdev->dev);
struct mxsfb_platform_data *pdata = pdev->dev.platform_data;
struct resource *res;
struct mxsfb_info *host;
struct fb_info *fb_info;
struct fb_modelist *modelist;
struct pinctrl *pinctrl;
+ int panel_enable;
int i, ret;
+ if (of_id)
+ pdev->id_entry = of_id->data;
+
if (!pdata) {
dev_err(&pdev->dev, "No platformdata. Giving up\n");
return -ENODEV;
@@ -807,6 +835,23 @@ static int __devinit mxsfb_probe(struct platform_device *pdev)
goto error_getclock;
}
+ panel_enable = of_get_named_gpio(pdev->dev.of_node,
+ "panel-enable-gpios", 0);
+ if (gpio_is_valid(panel_enable)) {
+ int flags = GPIOF_OUT_INIT_HIGH;
+ if (of_get_property(pdev->dev.of_node,
+ "enable-active-low", NULL))
+ flags = GPIOF_OUT_INIT_LOW;
+ ret = devm_gpio_request_one(&pdev->dev, panel_enable,
+ flags, "panel-enable");
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to request gpio %d: %d\n",
+ panel_enable, ret);
+ goto error_panel_enable;
+ }
+ }
+
fb_info->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
if (!fb_info->pseudo_palette) {
ret = -ENOMEM;
@@ -854,6 +899,7 @@ error_register:
error_init_fb:
kfree(fb_info->pseudo_palette);
error_pseudo_pallette:
+error_panel_enable:
clk_put(host->clk);
error_getclock:
error_getpin:
@@ -901,19 +947,6 @@ static void mxsfb_shutdown(struct platform_device *pdev)
writel(CTRL_RUN, host->base + LCDC_CTRL + REG_CLR);
}
-static struct platform_device_id mxsfb_devtype[] = {
- {
- .name = "imx23-fb",
- .driver_data = MXSFB_V3,
- }, {
- .name = "imx28-fb",
- .driver_data = MXSFB_V4,
- }, {
- /* sentinel */
- }
-};
-MODULE_DEVICE_TABLE(platform, mxsfb_devtype);
-
static struct platform_driver mxsfb_driver = {
.probe = mxsfb_probe,
.remove = __devexit_p(mxsfb_remove),
@@ -921,6 +954,7 @@ static struct platform_driver mxsfb_driver = {
.id_table = mxsfb_devtype,
.driver = {
.name = DRIVER_NAME,
+ .of_match_table = mxsfb_dt_ids,
},
};
--
1.7.5.4
More information about the linux-arm-kernel
mailing list