[PATCH 2/2] ARM: MXS: Add Crystalfontz CFA-10036 DTS

Maxime Ripard maxime.ripard at free-electrons.com
Thu Jun 21 04:46:54 EDT 2012


Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>

Cc: Brian Lily <brian at crystalfontz.com>
---
 arch/arm/boot/dts/cfa10036.dts |   66 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 arch/arm/boot/dts/cfa10036.dts

diff --git a/arch/arm/boot/dts/cfa10036.dts b/arch/arm/boot/dts/cfa10036.dts
new file mode 100644
index 0000000..ceae960
--- /dev/null
+++ b/arch/arm/boot/dts/cfa10036.dts
@@ -0,0 +1,66 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "Crystalfontz CFA-10036 Board";
+	compatible = "crystalfontz,cfa10036", "fsl,imx28-evk", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb at 80000000 {
+		apbh at 80000000 {
+			ssp0: ssp at 80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <4>;
+				status = "okay";
+			};
+			pinctrl at 80018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-pinctrl", "simple-bus";
+				reg = <0x80018000 2000>;
+
+				mmc0_4bit_pins_a: mmc0-4bit at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x2000 0x2010 0x2020
+						0x2030 0x2080 0x2090 0x20a0>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				duart_pins_a: duart at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x3022 0x3032>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+		};
+
+		apbx at 80040000 {
+			duart: serial at 80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+};
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list