[PATCH 3/3] ARM: integrator: convert to common clock
Linus Walleij
linus.walleij at linaro.org
Mon Jun 11 11:40:03 EDT 2012
This converts the Integrator platform to use common clock
and the ICST driver. Since from this point not all ARM
reference platforms use the clock, we define
CONFIG_PLAT_VERSATILE_CLOCK and select it for all platforms
except the Integrator.
Open issue: I could not use the .init_early() field of the
machine descriptor to initialize the clocks, but had to
move them to .init_irq(), so presumably .init_early() is
so early that common clock is not up, and .init_machine()
is too late since it's needed for the clockevent/clocksource
initialization. Any suggestions on how to solve this is
very welcome.
Cc: Russell King <linux at arm.linux.org.uk>
Cc: Mike Turquette <mturquette at ti.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
arch/arm/Kconfig | 7 +-
arch/arm/mach-integrator/core.c | 45 ----------
arch/arm/mach-integrator/include/mach/clkdev.h | 26 ------
arch/arm/mach-integrator/integrator_ap.c | 8 ++-
arch/arm/mach-integrator/integrator_cp.c | 63 +-------------
arch/arm/plat-versatile/Kconfig | 3 +
arch/arm/plat-versatile/Makefile | 2 +-
drivers/clk/Makefile | 1 +
drivers/clk/clk-integrator.c | 111 ++++++++++++++++++++++++
include/linux/platform_data/clk-integrator.h | 1 +
10 files changed, 131 insertions(+), 136 deletions(-)
delete mode 100644 arch/arm/mach-integrator/include/mach/clkdev.h
create mode 100644 drivers/clk/clk-integrator.c
create mode 100644 include/linux/platform_data/clk-integrator.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b649c59..a61afca 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -255,10 +255,10 @@ config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
select ARCH_HAS_CPUFREQ
- select CLKDEV_LOOKUP
- select HAVE_MACH_CLKDEV
+ select COMMON_CLK
select HAVE_TCM
select ICST
+ select CLK_ICST
select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE
select PLAT_VERSATILE_FPGA_IRQ
@@ -278,6 +278,7 @@ config ARCH_REALVIEW
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_CLCD
select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
@@ -295,6 +296,7 @@ config ARCH_VERSATILE
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_CLCD
select PLAT_VERSATILE_FPGA_IRQ
select ARM_TIMER_SP804
@@ -314,6 +316,7 @@ config ARCH_VEXPRESS
select ICST
select NO_IOPORT
select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_CLCD
help
This enables support for the ARM Ltd Versatile Express boards.
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 2a20bba..ebf680b 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -21,7 +21,6 @@
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
#include <linux/io.h>
-#include <linux/clkdev.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@@ -61,50 +60,6 @@ static struct amba_device *amba_devs[] __initdata = {
&kmi1_device,
};
-/*
- * These are fixed clocks.
- */
-static struct clk clk24mhz = {
- .rate = 24000000,
-};
-
-static struct clk uartclk = {
- .rate = 14745600,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
- { /* Bus clock */
- .con_id = "apb_pclk",
- .clk = &dummy_apb_pclk,
- }, {
- /* Integrator/AP timer frequency */
- .dev_id = "ap_timer",
- .clk = &clk24mhz,
- }, { /* UART0 */
- .dev_id = "uart0",
- .clk = &uartclk,
- }, { /* UART1 */
- .dev_id = "uart1",
- .clk = &uartclk,
- }, { /* KMI0 */
- .dev_id = "kmi0",
- .clk = &clk24mhz,
- }, { /* KMI1 */
- .dev_id = "kmi1",
- .clk = &clk24mhz,
- }, { /* MMCI - IntegratorCP */
- .dev_id = "mmci",
- .clk = &uartclk,
- }
-};
-
-void __init integrator_init_early(void)
-{
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
-
static int __init integrator_init(void)
{
int i;
diff --git a/arch/arm/mach-integrator/include/mach/clkdev.h b/arch/arm/mach-integrator/include/mach/clkdev.h
deleted file mode 100644
index bfe0767..0000000
--- a/arch/arm/mach-integrator/include/mach/clkdev.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <linux/module.h>
-#include <plat/clock.h>
-
-struct clk {
- unsigned long rate;
- const struct clk_ops *ops;
- struct module *owner;
- const struct icst_params *params;
- void __iomem *vcoreg;
- void *data;
-};
-
-static inline int __clk_get(struct clk *clk)
-{
- return try_module_get(clk->owner);
-}
-
-static inline void __clk_put(struct clk *clk)
-{
- module_put(clk->owner);
-}
-
-#endif
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index c857501..7b1055c 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -33,6 +33,7 @@
#include <linux/io.h>
#include <linux/mtd/physmap.h>
#include <linux/clk.h>
+#include <linux/platform_data/clk-integrator.h>
#include <video/vga.h>
#include <mach/hardware.h>
@@ -174,6 +175,7 @@ static void __init ap_init_irq(void)
fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
-1, INTEGRATOR_SC_VALID_INT, NULL);
+ integrator_clk_init(false);
}
#ifdef CONFIG_PM
@@ -440,6 +442,10 @@ static void integrator_clockevent_init(unsigned long inrate)
0xffffU);
}
+void __init ap_init_early(void)
+{
+}
+
/*
* Set up timer(s).
*/
@@ -471,7 +477,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator")
.reserve = integrator_reserve,
.map_io = ap_map_io,
.nr_irqs = NR_IRQS_INTEGRATOR_AP,
- .init_early = integrator_init_early,
+ .init_early = ap_init_early,
.init_irq = ap_init_irq,
.handle_irq = fpga_handle_irq,
.timer = &ap_timer,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a8c6480..82d5c83 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -21,8 +21,8 @@
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <linux/gfp.h>
-#include <linux/clkdev.h>
#include <linux/mtd/physmap.h>
+#include <linux/platform_data/clk-integrator.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@@ -171,65 +171,10 @@ static void __init intcp_init_irq(void)
fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
IRQ_CP_CPPLDINT, sic_mask, NULL);
+ integrator_clk_init(true);
}
/*
- * Clock handling
- */
-#define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
-#define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c)
-
-static const struct icst_params cp_auxvco_params = {
- .ref = 24000000,
- .vco_max = ICST525_VCO_MAX_5V,
- .vco_min = ICST525_VCO_MIN,
- .vd_min = 8,
- .vd_max = 263,
- .rd_min = 3,
- .rd_max = 65,
- .s2div = icst525_s2div,
- .idx2s = icst525_idx2s,
-};
-
-static void cp_auxvco_set(struct clk *clk, struct icst_vco vco)
-{
- u32 val;
-
- val = readl(clk->vcoreg) & ~0x7ffff;
- val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
- writel(0xa05f, CM_LOCK);
- writel(val, clk->vcoreg);
- writel(0, CM_LOCK);
-}
-
-static const struct clk_ops cp_auxclk_ops = {
- .round = icst_clk_round,
- .set = icst_clk_set,
- .setvco = cp_auxvco_set,
-};
-
-static struct clk cp_auxclk = {
- .ops = &cp_auxclk_ops,
- .params = &cp_auxvco_params,
- .vcoreg = CM_AUXOSC,
-};
-
-static struct clk sp804_clk = {
- .rate = 1000000,
-};
-
-static struct clk_lookup cp_lookups[] = {
- { /* CLCD */
- .dev_id = "clcd",
- .clk = &cp_auxclk,
- }, { /* SP804 timers */
- .dev_id = "sp804",
- .clk = &sp804_clk,
- },
-};
-
-/*
* Flash handling.
*/
static int intcp_flash_init(struct platform_device *dev)
@@ -406,10 +351,6 @@ static struct amba_device *amba_devs[] __initdata = {
static void __init intcp_init_early(void)
{
- clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups));
-
- integrator_init_early();
-
#ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK
versatile_sched_clock_init(REFCOUNTER, 24000000);
#endif
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
index 81ee7cc..8d5c10a 100644
--- a/arch/arm/plat-versatile/Kconfig
+++ b/arch/arm/plat-versatile/Kconfig
@@ -1,5 +1,8 @@
if PLAT_VERSATILE
+config PLAT_VERSATILE_CLOCK
+ bool
+
config PLAT_VERSATILE_CLCD
bool
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
index a5cb194..272769a8 100644
--- a/arch/arm/plat-versatile/Makefile
+++ b/arch/arm/plat-versatile/Makefile
@@ -1,4 +1,4 @@
-obj-y := clock.o
+obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o
obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o
obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o
obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index a7a7cf8..39e613b 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \
obj-$(CONFIG_ARCH_MXS) += mxs/
obj-$(CONFIG_PLAT_SPEAR) += spear/
obj-$(CONFIG_CLK_ICST) += clk-icst.o
+obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o
diff --git a/drivers/clk/clk-integrator.c b/drivers/clk/clk-integrator.c
new file mode 100644
index 0000000..a948389
--- /dev/null
+++ b/drivers/clk/clk-integrator.c
@@ -0,0 +1,111 @@
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#include "clk-icst.h"
+
+/*
+ * Implementation of the ARM Integrator/AP and Integrator/CP clock tree.
+ * Inspired by portions of:
+ * plat-versatile/clock.c and plat-versatile/include/plat/clock.h
+ */
+#define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
+#define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c)
+
+/**
+ * cp_auxvco_get() - get ICST VCO settings for the Integrator/CP
+ * @vco: ICST VCO parameters to update with hardware status
+ */
+static struct icst_vco cp_auxvco_get(void)
+{
+ u32 val;
+ struct icst_vco vco;
+
+ val = readl(CM_AUXOSC);
+ vco.v = val & 0x1ff;
+ vco.r = (val >> 9) & 0x7f;
+ vco.s = (val >> 16) & 03;
+ return vco;
+}
+
+/**
+ * cp_auxvco_set() - commit changes to Integrator/CP ICST VCO
+ * @vco: ICST VCO parameters to commit
+ */
+static void cp_auxvco_set(struct icst_vco vco)
+{
+ u32 val;
+
+ val = readl(CM_AUXOSC) & ~0x7ffff;
+ val |= vco.v | (vco.r << 9) | (vco.s << 16);
+
+ /* This magic unlocks the CM VCO so it can be controlled */
+ writel(0xa05f, CM_LOCK);
+ writel(val, CM_AUXOSC);
+ /* This locks the CM again */
+ writel(0, CM_LOCK);
+}
+
+static const struct icst_params cp_auxvco_params = {
+ .ref = 24000000,
+ .vco_max = ICST525_VCO_MAX_5V,
+ .vco_min = ICST525_VCO_MIN,
+ .vd_min = 8,
+ .vd_max = 263,
+ .rd_min = 3,
+ .rd_max = 65,
+ .s2div = icst525_s2div,
+ .idx2s = icst525_idx2s,
+};
+
+static const struct clk_icst_desc __initdata cp_icst_desc = {
+ .params = &cp_auxvco_params,
+ .getvco = cp_auxvco_get,
+ .setvco = cp_auxvco_set,
+};
+
+/*
+ * integrator_clk_init() - set up the integrator clock tree
+ * @is_cp: pass true if it's the Integrator/CP else AP is assumed
+ */
+void __init integrator_clk_init(bool is_cp)
+{
+ struct clk *clk;
+
+ /* APB clock dummy */
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+
+ /* UART reference clock */
+ clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT,
+ 14745600);
+ clk_register_clkdev(clk, NULL, "uart0");
+ clk_register_clkdev(clk, NULL, "uart1");
+ if (is_cp)
+ clk_register_clkdev(clk, NULL, "mmci");
+
+ /* 24 MHz clock */
+ clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT,
+ 24000000);
+ clk_register_clkdev(clk, NULL, "kmi0");
+ clk_register_clkdev(clk, NULL, "kmi1");
+ if (!is_cp)
+ clk_register_clkdev(clk, NULL, "ap_timer");
+
+ if (!is_cp)
+ return;
+
+ /* 1 MHz clock */
+ clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT,
+ 1000000);
+ clk_register_clkdev(clk, NULL, "sp804");
+
+ /* ICST VCO clock used on the Integrator/CP CLCD */
+ clk = icst_clk_init(NULL, &cp_icst_desc);
+ clk_register_clkdev(clk, NULL, "clcd");
+}
diff --git a/include/linux/platform_data/clk-integrator.h b/include/linux/platform_data/clk-integrator.h
new file mode 100644
index 0000000..83fe9c2
--- /dev/null
+++ b/include/linux/platform_data/clk-integrator.h
@@ -0,0 +1 @@
+void integrator_clk_init(bool is_cp);
--
1.7.7.6
More information about the linux-arm-kernel
mailing list