[Patch v5 05/13] usb: otg: add basic mxs phy driver support

[Marek Vasut]

Dear Sascha Hauer,

> On Wed, Jun 13, 2012 at 08:34:15PM +0800, Richard Zhao wrote:
> > mxs phy is used in Freescale i.MX SoCs, for example
> > imx23, imx28, imx6Q. This patch adds the basic host
> > support.
> > 
> > Signed-off-by: Richard Zhao <richard.zhao at freescale.com>
> > Signed-off-by: Marek Vasut <marex at denx.de>
> > Cc: Peter Chen <peter.chen at freescale.com>
> > Acked-by: Felipe Balbi <balbi at ti.com>
[...]

> > +	/* Remove CLKGATE and SFTRST */
> > +	writel_relaxed(BM_USBPHY_CTRL_CLKGATE | BM_USBPHY_CTRL_SFTRST,
> > +			base + HW_USBPHY_CTRL_CLR);
> > +	udelay(10);
> 
> Is stmp_reset_block() suitable for what you want to do here?

IIRC it is.

> > +	base = devm_request_and_ioremap(&pdev->dev, res);
> > +	if (!base)
> > +		return -EBUSY;
> > +
> > +	clk = devm_clk_get(&pdev->dev, NULL);
> > +	if (IS_ERR(clk)) {
> > +		dev_err(&pdev->dev, "can't get the clock!");
> 
> Please add the return value to these kind of messages.
> 
> > +		return PTR_ERR(clk);
> > +	}
> > +
> > +	mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL);
> > +	if (!mxs_phy) {
> > +		dev_err(&pdev->dev, "Failed to allocate USB PHY structure!\n");
> 
> This message is rather useless. It is really not expected for kzalloc
> to fail. If it fails here you really have problems elsewhere and this
> message won't help you debugging it.

It's not useless, but it'll hardly ever be displayed if you run out of memory so 
badly this kzalloc() will fail.

> Sascha

Best regards,