[Patch v5 00/13] add imx usb driver for mx28/6x

[Subodh Nijsure]

Richard,

In case you are looking for Ack/Tested by for this patch set.

Applied this patch set and USB devices work with this patch, on mx28 
based hardware that I have access to.

Tested-by: Subodh Nijsure <snijsure at grid-net.com>

-Subodh

On 06/13/2012 05:34 AM, Richard Zhao wrote:
> The work is based on  ci13xxx rework done by Alexander Shishkin.
>
> Status:
>    - this version only support host
>    - usbotg controler works at host role
>
> Changes since last version:
>   - collect ack received.
>
> Richard Zhao (13):
>    usb: otg: add notify_connect/notify_disconnect callback
>    USB: move transceiver from ehci_hcd and ohci_hcd to hcd and rename it
>      as phy
>    USB: notify phy when root hub port connect change
>    usb: chipidea: permit driver bindings pass phy pointer
>    usb: otg: add basic mxs phy driver support
>    usb: chipidea: add imx platform driver
>    ARM: imx6q: correct device name of usbphy and usb controller clock
>      export
>    ARM: imx6q: add config-on-boot gpios
>    ARM: imx6q: add usbphy clocks
>    ARM: imx6q: disable usb charger detector
>    ARM: dts: imx6q-sabrelite: add usb devices
>    ARM: mxs: clk_register_clkdev mx28 usb clocks
>    ARM: dts: imx28-evk: add usb devices
>
>   .../devicetree/bindings/arm/config-on-boot.txt     |   12 ++
>   .../devicetree/bindings/usb/ci13xxx-imx.txt        |   20 ++
>   Documentation/devicetree/bindings/usb/mxs-phy.txt  |   13 ++
>   arch/arm/boot/dts/imx28-evk.dts                    |   36 ++++
>   arch/arm/boot/dts/imx28.dtsi                       |   12 +-
>   arch/arm/boot/dts/imx6q-sabrelite.dts              |   35 ++++
>   arch/arm/boot/dts/imx6q.dtsi                       |   36 +++-
>   arch/arm/mach-imx/clk-imx6q.c                      |   12 +-
>   arch/arm/mach-imx/mach-imx6q.c                     |   59 ++++++
>   drivers/clk/mxs/clk-imx28.c                        |    4 +
>   drivers/usb/chipidea/Makefile                      |    3 +
>   drivers/usb/chipidea/ci.h                          |    2 +
>   drivers/usb/chipidea/ci13xxx_imx.c                 |  189 ++++++++++++++++++
>   drivers/usb/chipidea/core.c                        |    4 +
>   drivers/usb/chipidea/host.c                        |    1 +
>   drivers/usb/chipidea/udc.c                         |   11 +-
>   drivers/usb/core/hub.c                             |    8 +
>   drivers/usb/host/ehci-fsl.c                        |   21 +-
>   drivers/usb/host/ehci-hub.c                        |    2 +-
>   drivers/usb/host/ehci.h                            |    4 -
>   drivers/usb/host/ohci-omap.c                       |   27 +--
>   drivers/usb/host/ohci.h                            |    5 -
>   drivers/usb/otg/Kconfig                            |    8 +
>   drivers/usb/otg/Makefile                           |    1 +
>   drivers/usb/otg/mxs-phy.c                          |  204 ++++++++++++++++++++
>   include/linux/usb/chipidea.h                       |    3 +
>   include/linux/usb/hcd.h                            |    6 +
>   include/linux/usb/otg.h                            |   21 ++
>   28 files changed, 715 insertions(+), 44 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/arm/config-on-boot.txt
>   create mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
>   create mode 100644 Documentation/devicetree/bindings/usb/mxs-phy.txt
>   create mode 100644 drivers/usb/chipidea/ci13xxx_imx.c
>   create mode 100644 drivers/usb/otg/mxs-phy.c
>