[PATCH v2 2/3] serial: mxs-auart: Allow device tree probing
Fabio Estevam
festevam at gmail.com
Fri Jun 15 07:32:29 EDT 2012
From: Fabio Estevam <fabio.estevam at freescale.com>
Allow device tree probing.
Cc: Grant Likely <grant.likely at secretlab.ca>
Cc: Rob Herring <rob.herring at calxeda.com>
Cc: Alan Cox <alan at linux.intel.com>
Cc: <linux-serial at vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v1:
- Merged patches 3 and 5 from v1 into this one
.../bindings/tty/serial/fsl-mxs-auart.txt | 13 +++++
drivers/tty/serial/mxs-auart.c | 55 +++++++++++++++++++-
2 files changed, 67 insertions(+), 1 deletions(-)
create mode 100644 Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
new file mode 100644
index 0000000..1b28b1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
@@ -0,0 +1,13 @@
+* Freescale MXS Application UART (AUART)
+
+Required properties:
+- compatible : Should be "fsl,mxs-uart"
+- reg : Address and length of the register set for the device
+- interrupts : Should contain the auart interrupt
+
+Example:
+auart0: serial at 8006a000 {
+ compatible = "fsl,mxs-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112 70 71>;
+};
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index ec56d83..21e2ce7 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -33,6 +33,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/of_device.h>
#include <asm/cacheflush.h>
@@ -675,6 +676,44 @@ static struct uart_driver auart_driver = {
#endif
};
+#ifdef CONFIG_OF
+/*
+ * This function returns 1 if pdev isn't a device instatiated by dt, 0 if it
+ * could successfully get all information from dt or a negative errno.
+ */
+static int serial_mxs_probe_dt(struct mxs_auart_port *s,
+ struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ if (!np)
+ /* no device tree device */
+ return 1;
+
+ ret = of_alias_get_id(np, "serial");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get alias id: %d\n", ret);
+ return ret;
+ }
+ s->port.line = ret;
+
+ return 0;
+}
+#else
+static inline int serial_mxs_probe_dt(struct mxs_auart_port *s,
+ struct platform_device *pdev)
+{
+ return 1;
+}
+#endif
+
+static void mxs_auart_probe_pdev(struct mxs_auart_port *s,
+ struct platform_device *pdev)
+{
+ s->port.line = pdev->id < 0 ? 0 : pdev->id;
+}
+
static int __devinit mxs_auart_probe(struct platform_device *pdev)
{
struct mxs_auart_port *s;
@@ -689,6 +728,14 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
goto out;
}
+ ret = serial_mxs_probe_dt(s, pdev);
+ if (ret > 0)
+ mxs_auart_probe_pdev(s, pdev);
+ else if (ret < 0) {
+ ret = -EINVAL;
+ goto out_free;
+ }
+
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl)) {
ret = PTR_ERR(pinctrl);
@@ -711,7 +758,6 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
s->port.membase = ioremap(r->start, resource_size(r));
s->port.ops = &mxs_auart_ops;
s->port.iotype = UPIO_MEM;
- s->port.line = pdev->id < 0 ? 0 : pdev->id;
s->port.fifosize = 16;
s->port.uartclk = clk_get_rate(s->clk);
s->port.type = PORT_IMX;
@@ -769,12 +815,19 @@ static int __devexit mxs_auart_remove(struct platform_device *pdev)
return 0;
}
+static struct of_device_id mxs_auart_dt_ids[] = {
+ {.compatible = "fsl,mxs-auart", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
+
static struct platform_driver mxs_auart_driver = {
.probe = mxs_auart_probe,
.remove = __devexit_p(mxs_auart_remove),
.driver = {
.name = "mxs-auart",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(mxs_auart_dt_ids),
},
};
--
1.7.1
More information about the linux-arm-kernel
mailing list