[PATCH 01/10] ARM: S3C24XX: Free the backlight gpio requested in Mini2440 board code

[Sylwester Nawrocki]

The backlight gpio must not be left requested in the board
code, otherwise s3c24xx_led driver can't successfully claim it.
So request the backlight gpio, configure it to proper state and
gpio_free right away.

This change is required for converting the s3c24xx_led driver
to the gpiolib API.

Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki at gmail.com>
---
 arch/arm/mach-s3c24xx/mach-mini2440.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index f092b18..bd6d252 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -634,8 +634,8 @@ static void __init mini2440_init(void)
 	s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
 
 	/* Turn the backlight early on */
-	WARN_ON(gpio_request(S3C2410_GPG(4), "backlight"));
-	gpio_direction_output(S3C2410_GPG(4), 1);
+	WARN_ON(gpio_request_one(S3C2410_GPG(4), GPIOF_OUT_INIT_HIGH, NULL));
+	gpio_free(S3C2410_GPG(4));
 
 	/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
 	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
-- 
1.7.4.1