[PATCH 4/7] ARM: mxs: Add SPI clock into clk framwork

[Shawn Guo]

On Sat, Jun 23, 2012 at 08:43:50PM +0200, Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Chris Ball <cjb at laptop.org>
> Cc: Detlev Zundel <dzu at denx.de>
> CC: Dong Aisheng <b29396 at freescale.com>
> Cc: Fabio Estevam <fabio.estevam at freescale.com>
> Cc: Grant Likely <grant.likely at secretlab.ca>
> Cc: Linux ARM kernel <linux-arm-kernel at lists.infradead.org>
> Cc: Rob Herring <rob.herring at calxeda.com>
> CC: Shawn Guo <shawn.guo at linaro.org>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Wolfgang Denk <wd at denx.de>
> ---
>  drivers/clk/mxs/clk-imx28.c |    4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
> index 003b0f3..d22b926 100644
> --- a/drivers/clk/mxs/clk-imx28.c
> +++ b/drivers/clk/mxs/clk-imx28.c
> @@ -149,21 +149,25 @@ static struct clk_lookup xbus_lookups[] __initdata = {
>  
>  static struct clk_lookup ssp0_lookups[] __initdata = {
>  	{ .dev_id = "imx28-mmc.0", },
> +	{ .dev_id = "imx28-spi.0", },
>  	{ .dev_id = "80010000.ssp", },
>  };
>  
>  static struct clk_lookup ssp1_lookups[] __initdata = {
>  	{ .dev_id = "imx28-mmc.1", },
> +	{ .dev_id = "imx28-spi.1", },
>  	{ .dev_id = "80012000.ssp", },
>  };
>  
>  static struct clk_lookup ssp2_lookups[] __initdata = {
>  	{ .dev_id = "imx28-mmc.2", },
> +	{ .dev_id = "imx28-spi.2", },
>  	{ .dev_id = "80014000.ssp", },
>  };
>  
>  static struct clk_lookup ssp3_lookups[] __initdata = {
>  	{ .dev_id = "imx28-mmc.3", },
> +	{ .dev_id = "imx28-spi.3", },
>  	{ .dev_id = "80016000.ssp", },
>  };

These changes should not be needed, as the driver will only be probed
from device tree.

-- 
Regards,
Shawn