[Patch v5 05/13] usb: otg: add basic mxs phy driver support
Richard Zhao
richard.zhao at freescale.com
Wed Jun 13 08:34:15 EDT 2012
mxs phy is used in Freescale i.MX SoCs, for example
imx23, imx28, imx6Q. This patch adds the basic host
support.
Signed-off-by: Richard Zhao <richard.zhao at freescale.com>
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Peter Chen <peter.chen at freescale.com>
Acked-by: Felipe Balbi <balbi at ti.com>
---
Documentation/devicetree/bindings/usb/mxs-phy.txt | 13 ++
drivers/usb/otg/Kconfig | 8 +
drivers/usb/otg/Makefile | 1 +
drivers/usb/otg/mxs-phy.c | 204 +++++++++++++++++++++
4 files changed, 226 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/mxs-phy.txt
create mode 100644 drivers/usb/otg/mxs-phy.c
diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
new file mode 100644
index 0000000..5835b27
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
@@ -0,0 +1,13 @@
+* Freescale MXS USB Phy Device
+
+Required properties:
+- compatible: Should be "fsl,imx23-usbphy"
+- reg: Should contain registers location and length
+- interrupts: Should contain phy interrupt
+
+Example:
+usbphy1: usbphy at 020c9000 {
+ compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020c9000 0x1000>;
+ interrupts = <0 44 0x04>;
+};
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 5c87db0..3a9bc44 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -116,6 +116,14 @@ config FSL_USB2_OTG
help
Enable this to support Freescale USB OTG transceiver.
+config USB_MXS_PHY
+ tristate "Freescale MXS USB PHY support"
+ select USB_OTG_UTILS
+ help
+ Enable this to support the Freescale MXS USB PHY.
+
+ MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
+
config USB_MV_OTG
tristate "Marvell USB OTG support"
depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 41aa509..a844b8d 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_USB_MSM_OTG) += msm_otg.o
obj-$(CONFIG_AB8500_USB) += ab8500-usb.o
fsl_usb2_otg-objs := fsl_otg.o otg_fsm.o
obj-$(CONFIG_FSL_USB2_OTG) += fsl_usb2_otg.o
+obj-$(CONFIG_USB_MXS_PHY) += mxs-phy.o
obj-$(CONFIG_USB_MV_OTG) += mv_otg.o
diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/otg/mxs-phy.c
new file mode 100644
index 0000000..a55aaed
--- /dev/null
+++ b/drivers/usb/otg/mxs-phy.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Marek Vasut <marex at denx.de>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/usb/otg.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#define DRIVER_NAME "mxs_phy"
+
+#define HW_USBPHY_PWD 0x00
+#define HW_USBPHY_CTRL 0x30
+#define HW_USBPHY_CTRL_SET 0x34
+#define HW_USBPHY_CTRL_CLR 0x38
+
+#define BM_USBPHY_CTRL_SFTRST BIT(31)
+#define BM_USBPHY_CTRL_CLKGATE BIT(30)
+#define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15)
+#define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14)
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1)
+
+struct mxs_phy {
+ struct usb_phy phy;
+ struct clk *clk;
+ int connected:1;
+};
+
+#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
+
+static void mxs_phy_hw_init(struct mxs_phy *mxs_phy)
+{
+ void __iomem *base = mxs_phy->phy.io_priv;
+
+ writel_relaxed(BM_USBPHY_CTRL_CLKGATE, base + HW_USBPHY_CTRL_CLR);
+
+ /* Reset USBPHY module */
+ writel_relaxed(BM_USBPHY_CTRL_SFTRST, base + HW_USBPHY_CTRL_SET);
+ udelay(10);
+
+ /* Remove CLKGATE and SFTRST */
+ writel_relaxed(BM_USBPHY_CTRL_CLKGATE | BM_USBPHY_CTRL_SFTRST,
+ base + HW_USBPHY_CTRL_CLR);
+ udelay(10);
+
+ /* Power up the PHY */
+ writel_relaxed(0, base + HW_USBPHY_PWD);
+
+ /* enable FS/LS device */
+ writel_relaxed(BM_USBPHY_CTRL_ENUTMILEVEL2 |
+ BM_USBPHY_CTRL_ENUTMILEVEL3,
+ base + HW_USBPHY_CTRL_SET);
+
+}
+
+static int mxs_phy_init(struct usb_phy *phy)
+{
+ struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+ clk_prepare_enable(mxs_phy->clk);
+ mxs_phy_hw_init(mxs_phy);
+
+ return 0;
+}
+
+static void mxs_phy_shutdown(struct usb_phy *phy)
+{
+ struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+ writel_relaxed(BM_USBPHY_CTRL_CLKGATE,
+ phy->io_priv + HW_USBPHY_CTRL_SET);
+
+ clk_disable_unprepare(mxs_phy->clk);
+}
+
+static int mxs_phy_on_connect(struct usb_phy *phy, int port)
+{
+ struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+ dev_dbg(phy->dev, "Connect on port %d\n", port);
+
+ if (mxs_phy->connected)
+ return 0;
+ mxs_phy_hw_init(to_mxs_phy(phy));
+ writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+ phy->io_priv + HW_USBPHY_CTRL_SET);
+ mxs_phy->connected = 1;
+
+ return 0;
+}
+
+static int mxs_phy_on_disconnect(struct usb_phy *phy, int port)
+{
+ struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+ dev_dbg(phy->dev, "Disconnect on port %d\n", port);
+
+ if (!mxs_phy->connected)
+ return 0;
+ writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+ phy->io_priv + HW_USBPHY_CTRL_CLR);
+ mxs_phy->connected = 0;
+
+ return 0;
+}
+
+static int mxs_phy_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ void __iomem *base;
+ struct clk *clk;
+ struct mxs_phy *mxs_phy;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "can't get device resources\n");
+ return -ENOENT;
+ }
+
+ base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!base)
+ return -EBUSY;
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "can't get the clock!");
+ return PTR_ERR(clk);
+ }
+
+ mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL);
+ if (!mxs_phy) {
+ dev_err(&pdev->dev, "Failed to allocate USB PHY structure!\n");
+ return -ENOMEM;
+ }
+
+ mxs_phy->phy.io_priv = base;
+ mxs_phy->phy.dev = &pdev->dev;
+ mxs_phy->phy.label = DRIVER_NAME;
+ mxs_phy->phy.init = mxs_phy_init;
+ mxs_phy->phy.shutdown = mxs_phy_shutdown;
+ mxs_phy->phy.notify_connect = mxs_phy_on_connect;
+ mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect;
+
+ ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
+
+ mxs_phy->clk = clk;
+
+ platform_set_drvdata(pdev, &mxs_phy->phy);
+
+ return 0;
+}
+
+static int __devexit mxs_phy_remove(struct platform_device *pdev)
+{
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id mxs_phy_dt_ids[] = {
+ { .compatible = "fsl,imx23-usbphy", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver mxs_phy_driver = {
+ .probe = mxs_phy_probe,
+ .remove = __devexit_p(mxs_phy_remove),
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = mxs_phy_dt_ids,
+ },
+};
+
+static int __init mxs_phy_module_init(void)
+{
+ return platform_driver_register(&mxs_phy_driver);
+}
+postcore_initcall(mxs_phy_module_init);
+
+static void __exit mxs_phy_module_exit(void)
+{
+ platform_driver_unregister(&mxs_phy_driver);
+}
+module_exit(mxs_phy_module_exit);
+
+MODULE_ALIAS("platform:mxs-usb-phy");
+MODULE_AUTHOR("Marek Vasut <marex at denx.de>");
+MODULE_AUTHOR("Richard Zhao <richard.zhao at freescale.com>");
+MODULE_DESCRIPTION("Freescale MXS USB PHY driver");
+MODULE_LICENSE("GPL");
--
1.7.9.5
More information about the linux-arm-kernel
mailing list