[PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc
Shawn Guo
shawn.guo at linaro.org
Mon Jun 25 00:37:14 EDT 2012
On Fri, Jun 08, 2012 at 08:56:44PM +0200, Marek Vasut wrote:
> Add simple binding for the stmp3xxx-rtc.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Alessandro Zummo <a.zummo at towertech.it>
Hi Alessandro,
The patch has some changes on arch/arm/boot/dts/imx28.dtsi, and also we
need the patch to convert some board files over to device tree. May I
have your ack to queue the patch on my tree?
Regards,
Shawn
> Cc: devicetree-discuss at lists.ozlabs.org
> Cc: Grant Likely <grant.likely at secretlab.ca>
> Cc: Rob Herring <rob.herring at calxeda.com>
> Cc: rtc-linux at googlegroups.com
> Cc: Shawn Guo <shawn.guo at linaro.org>
> ---
> .../devicetree/bindings/rtc/stmp3xxx-rtc.txt | 19 +++++++++++++++++++
> arch/arm/boot/dts/imx28.dtsi | 1 +
> drivers/rtc/rtc-stmp3xxx.c | 7 +++++++
> 3 files changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
>
> V2: Fix typos, remove fsl,imx28-rtc
>
> diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
> new file mode 100644
> index 0000000..a7a7de5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
> @@ -0,0 +1,19 @@
> +* STMP3xxx/i.MX28 Time Clock controller
> +
> +Required properties:
> +- compatible: should be one of the following.
> + * "fsl,stmp3xxx-rtc"
> +- reg: physical base address of the controller and length of memory mapped
> + region.
> +- interrupts: Two interrupt numbers to the cpu should be specified. First
> + interrupt number is the rtc tick interrupt and second interrupt number
> + is the rtc alarm interrupt. The number of cells representing a interrupt
> + depends on the parent interrupt controller.
> +
> +Example:
> +
> + rtc at 80056000 {
> + compatible = "fsl,stmp3xxx-rtc";
> + reg = <0x80056000 2000>;
> + interrupts = <28 29>;
> + };
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> index cabcce8..5053019 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -387,6 +387,7 @@
> };
>
> rtc at 80056000 {
> + compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
> reg = <0x80056000 2000>;
> interrupts = <28 29>;
> status = "disabled";
> diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
> index 1028786..3aadb58 100644
> --- a/drivers/rtc/rtc-stmp3xxx.c
> +++ b/drivers/rtc/rtc-stmp3xxx.c
> @@ -25,6 +25,7 @@
> #include <linux/interrupt.h>
> #include <linux/rtc.h>
> #include <linux/slab.h>
> +#include <linux/of_device.h>
>
> #include <mach/common.h>
>
> @@ -265,6 +266,11 @@ static int stmp3xxx_rtc_resume(struct platform_device *dev)
> #define stmp3xxx_rtc_resume NULL
> #endif
>
> +static const struct of_device_id rtc_dt_ids[] = {
> + { .compatible = "fsl,stmp3xxx-rtc", },
> + { /* sentinel */ }
> +};
> +
> static struct platform_driver stmp3xxx_rtcdrv = {
> .probe = stmp3xxx_rtc_probe,
> .remove = stmp3xxx_rtc_remove,
> @@ -273,6 +279,7 @@ static struct platform_driver stmp3xxx_rtcdrv = {
> .driver = {
> .name = "stmp3xxx-rtc",
> .owner = THIS_MODULE,
> + .of_match_table = rtc_dt_ids,
> },
> };
>
> --
> 1.7.10
>
More information about the linux-arm-kernel
mailing list