[PATCH 09/17] i2c: omap: ack IRQ in parts
Felipe Balbi
balbi at ti.com
Thu Jun 14 07:46:39 EDT 2012
On Thu, Jun 14, 2012 at 04:41:45PM +0530, Shilimkar, Santosh wrote:
> On Thu, Jun 14, 2012 at 3:50 PM, Felipe Balbi <balbi at ti.com> wrote:
> > According to flow diagrams on OMAP TRMs,
> > we should ACK the IRQ as they happen.
> >
> > Signed-off-by: Felipe Balbi <balbi at ti.com>
> > ---
> > drivers/i2c/busses/i2c-omap.c | 29 +++++++++++++++++------------
> > 1 file changed, 17 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> > index f978b14..c00ba7d 100644
> > --- a/drivers/i2c/busses/i2c-omap.c
> > +++ b/drivers/i2c/busses/i2c-omap.c
> > @@ -894,21 +894,20 @@ omap_i2c_isr(int this_irq, void *dev_id)
> > }
> >
> > complete:
> > - /*
> > - * Ack the stat in one go, but [R/X]DR and [R/X]RDY should be
> > - * acked after the data operation is complete.
> > - * Ref: TRM SWPU114Q Figure 18-31
> > - */
> > - omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat &
> > - ~(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
> > - OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
> > -
> > - if (stat & OMAP_I2C_STAT_NACK)
> > + if (stat & OMAP_I2C_STAT_NACK) {
> > + dev_err(dev->dev, "No Acknowledge\n");
> > err |= OMAP_I2C_STAT_NACK;
> > + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK);
> > + omap_i2c_complete_cmd(dev, err);
> > + return IRQ_HANDLED;
> > + }
> >
> Do you think making I2C IRQ ack + complete as one small static inline function
> can save clean the code further. I see it has been used in multiple paths.
done in a later patch
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120614/21a64ab8/attachment.sig>
More information about the linux-arm-kernel
mailing list