July 2015 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Jul 1 00:03:20 PDT 2015
Ending: Fri Jul 31 23:43:40 PDT 2015
Messages: 8068

• [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller   majun (F)
• [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller   majun (F)
• [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller   majun (F)
• [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller   majun (F)
• [PATCH v3 3/3] dt-binding:Documents the mbigen bindings   majun (F)
• [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller   majun (F)
• [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller   majun (F)
• [PATCH v4 09/19] drivers: base: Add MSI domain support for non-PCI devices   majun (F)
• [PATCH v3 3/3] dt-binding:Documents the mbigen bindings   majun (F)
• [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller   majun (F)
• [PATCH v3 0/5] iommu/arm-smmu: add support for non-pci devices   Leizhen (ThunderTown)
• [PATCH 0/2] arm64: support initrd outside of mapped RAM   Jon Medhurst (Tixy)
• [PATCH v8 1/5] mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others   Albert ARIBAUD
• [PATCH v8 1/5] mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others   Albert ARIBAUD
• [PATCH v9 1/5] mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others   Albert ARIBAUD
• Oops at boot after commit 965278dcb8ab... when using split memory region   Laura Abbott
• Having Linux handle different "types" of memory   Laura Abbott
• [RFC] arm64:use set_fixmap_offset to make it more clear   Laura Abbott
• [PATCH][v3] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Alonso Adrian
• [PATCH][v3] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Alonso Adrian
• [PATCH][v3] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Alonso Adrian
• [RFC PATCH 1/7] ARM: dts: vf610: Add missing QuadSPI register mapping and names.   Stefan Agner
• [RFC PATCH 2/7] ARM: dts: vfxxx: Include support for qspi1 functionality.   Stefan Agner
• [PATCH] ARM: dts: vf-colibri: define stdout-path property   Stefan Agner
• [PATCH 39/41] clocksource: vf_pit: Migrate to new 'set-state' interface   Stefan Agner
• [PATCH 39/41] clocksource: vf_pit: Migrate to new 'set-state' interface   Stefan Agner
• [PATCH v1 1/4] ARM: dts: vfxxx: Add io-channel-cells property for ADC node   Stefan Agner
• [PATCH v1 2/4] ARM: dts: vf500-colibri: Add device tree node for touchscreen support   Stefan Agner
• [PATCH v1 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50   Stefan Agner
• [PATCH] pwm: ftm: fix clock enable/disable when using PM   Stefan Agner
• [PATCH v4] ARM: early fixmap support for earlycon   Stefan Agner
• [PATCH v2 1/2] iio: adc: Determine sampling frequencies by using minimum sample time   Stefan Agner
• [PATCH 0/1] Add support for esdhc0 on Vybrid.   Stefan Agner
• [PATCH 1/1] ARM: dts: vfxxx: Include support for esdhc0 functionality.   Stefan Agner
• [PATCH v6 4/6] ARM: vf610: enable NAND Flash Controller   Stefan Agner
• [PATCH v2 2/2] ARM: dts: vfxxx: Add property for minimum sample time   Stefan Agner
• [PATCH v3] ARM: early fixmap support for earlycon   Stefan Agner
• [PATCH v3 2/2] ARM: dts: vf-colibri: Add property for minimum sample time   Stefan Agner
• [PATCH] ARM: dts: vf-colibri: define stdout-path property   Stefan Agner
• [PATCH v2] ARM: dts: vf-colibri: define stdout-path property   Stefan Agner
• [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50   Stefan Agner
• [PATCH v7 0/5] mtd: nand: vf610_nfc: Freescale NFC for VF610   Stefan Agner
• [PATCH v7 1/5] mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others   Stefan Agner
• [PATCH v7 2/5] mtd: nand: vf610_nfc: add hardware BCH-ECC support   Stefan Agner
• [PATCH v7 3/5] mtd: nand: vf610_nfc: add device tree bindings   Stefan Agner
• [PATCH v7 4/5] ARM: dts: vf610twr: add NAND flash controller peripherial   Stefan Agner
• [PATCH v7 5/5] ARM: dts: vf-colibri: enable NAND flash controller   Stefan Agner
• [PATCH v8 0/5] mtd: nand: vf610_nfc: Freescale NFC for VF610   Stefan Agner
• [PATCH v8 1/5] mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others   Stefan Agner
• [PATCH v8 2/5] mtd: nand: vf610_nfc: add hardware BCH-ECC support   Stefan Agner
• [PATCH v8 3/5] mtd: nand: vf610_nfc: add device tree bindings   Stefan Agner
• [PATCH v8 4/5] ARM: dts: vf610twr: add NAND flash controller peripherial   Stefan Agner
• [PATCH v8 5/5] ARM: dts: vf-colibri: enable NAND flash controller   Stefan Agner
• [PATCH v3 1/2] mmc: sdhci: fix abort due to missing runtime PM   Stefan Agner
• [PATCH] irqchip: gic: Add a cpu map for each GIC instance   Stefan Agner
• [PATCH v2] ARM: dts: vf-colibri: define stdout-path property   Stefan Agner
• [PATCH v8 1/5] mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others   Stefan Agner
• [PATCH v4] ARM: early fixmap support for earlycon   Stefan Agner
• [PATCH v7 2/2] ARM: imx: Add suspend codes for imx7D   Stefan Agner
• [PATCH v9 0/5] mtd: nand: vf610_nfc: Freescale NFC for VF610   Stefan Agner
• [PATCH v9 1/5] mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others   Stefan Agner
• [PATCH v9 2/5] mtd: nand: vf610_nfc: add hardware BCH-ECC support   Stefan Agner
• [PATCH v9 3/5] mtd: nand: vf610_nfc: add device tree bindings   Stefan Agner
• [PATCH v9 4/5] ARM: dts: vf610twr: add NAND flash controller peripherial   Stefan Agner
• [PATCH v9 5/5] ARM: dts: vf-colibri: enable NAND flash controller   Stefan Agner
• [PATCH v7 1/5] mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others   Stefan Agner
• [PATCH v9 3/5] mtd: nand: vf610_nfc: add device tree bindings   Stefan Agner
• [PATCH v9 2/5] mtd: nand: vf610_nfc: add hardware BCH-ECC support   Stefan Agner
• [PATCH v9 2/5] mtd: nand: vf610_nfc: add hardware BCH-ECC support   Stefan Agner
• [PATCH] thermal: consistently use int for temperatures   Punit Agrawal
• [PATCH v2] thermal: consistently use int for temperatures   Punit Agrawal
• [PATCH 1/2] ARM: OMAP2+: Remove legacy OMAP3 ISP instantiation   Sakari Ailus
• [PATCH 1/2] ARM: OMAP2+: Remove legacy OMAP3 ISP instantiation   Sakari Ailus
• [PATCH 0/2] omap3isp: Remove legacy platform data support   Sakari Ailus
• [PATCH 4/6] mmc: sdhci-esdhc-imx: remove duplicated dts parsing   Dong Aisheng
• [PATCH 0/6] mmc: sdhci-esdhci-imx: fix cd/wp regression   Dong Aisheng
• [PATCH 0/6] mmc: sdhci-esdhci-imx: fix cd/wp regression   Dong Aisheng
• [PATCH v2 1/5] clk: remove duplicated code with __clk_set_parent_after   Dong Aisheng
• [PATCH v2 1/5] clk: remove duplicated code with __clk_set_parent_after   Dong Aisheng
• [PATCH V2 00/11] mmc: sdhci-esdhci-imx: fix cd/wp regression   Dong Aisheng
• [PATCH V2 01/11] dts: imx51: fix sd card gpio polarity specified in device tree   Dong Aisheng
• [PATCH V2 02/11] dts: imx53: fix sd card gpio polarity specified in device tree   Dong Aisheng
• [PATCH V2 03/11] dts: imx6: fix sd card gpio polarity specified in device tree   Dong Aisheng
• [PATCH V2 04/11] dts: imx25: fix sd card gpio polarity specified in device tree   Dong Aisheng
• [PATCH V2 05/11] dts: imx7: fix sd card gpio polarity specified in device tree   Dong Aisheng
• [PATCH V2 06/11] mmc: sdhci-esdhc-imx: fix cd regression for dt platform   Dong Aisheng
• [PATCH V2 07/11] mmc: sdhci-esdhc-imx: move all non dt probe code into one function   Dong Aisheng
• [PATCH V2 08/11] mmc: sdhci: make max-frequency property in device tree work   Dong Aisheng
• [PATCH V2 09/11] mmc: sdhci-esdhc-imx: remove duplicated dts parsing   Dong Aisheng
• [PATCH V2 10/11] mmc: sdhci-esdhc-imx: clear f_max in boarddata   Dong Aisheng
• [PATCH V2 11/11] dts: mmc: fsl-imx-esdhc: remove fsl, cd-controller support   Dong Aisheng
• [PATCH 0/6] mmc: sdhci-esdhci-imx: fix cd/wp regression   Dong Aisheng
• [PATCH 0/6] mmc: sdhci-esdhci-imx: fix cd/wp regression   Dong Aisheng
• [PATCH v2 1/5] clk: remove duplicated code with __clk_set_parent_after   Dong Aisheng
• [PATCH v2 1/5] clk: remove duplicated code with __clk_set_parent_after   Dong Aisheng
• [PATCH V3 0/5] clk: support clocks which requires parent clock on during operation   Dong Aisheng
• [PATCH V3 1/5] clk: remove duplicated code with __clk_set_parent_after   Dong Aisheng
• [PATCH V3 2/5] clk: introduce clk_core_enable_lock and clk_core_disable_lock functions   Dong Aisheng
• [PATCH V3 3/5] clk: move clk_disable_unused after clk_core_disable_unprepare function   Dong Aisheng
• [PATCH V3 4/5] clk: core: add CLK_OPS_PARENT_ON flags to support clocks require parent on   Dong Aisheng
• [PATCH V3 5/5] clk: core: add CLK_OPS_PARENT_ON flags to support clocks require parent on   Dong Aisheng
• [PATCH 0/4] clk: imx7d: switch to clk api with CLK_OPS_PARENT_ON enabled   Dong Aisheng
• [PATCH 1/4] clk: imx: move imx_clk_gate_x into one place   Dong Aisheng
• [PATCH 2/4] clk: imx: add clk api for supporting clk_OPS_PARENT_ON clocks   Dong Aisheng
• [PATCH 3/4] clk: imx7d: using api with flag CLK_OPS_PARENT_ON   Dong Aisheng
• [PATCH 4/4] clk: imx7d: only enable minimum required clocks   Dong Aisheng
• [PATCH V3 0/5] clk: support clocks which requires parent clock on during operation   Dong Aisheng
• [PATCH v3 0/6] mmc: imx: a few fixes and new feature   Dong Aisheng
• [PATCH v3 2/6] mmc: sdhci-esdhc-imx: add tuning-step seting support   Dong Aisheng
• [PATCH v3 1/6] mmc: sdhci-esdhc-imx: add imx7d support and support HS400   Dong Aisheng
• [PATCH v3 4/6] mmc: sdhci-esdhc-imx: add compatible string in bingding doc   Dong Aisheng
• [PATCH v3 3/6] ARM: dts: imx7d-sdb: add eMMC5.0 support   Dong Aisheng
• [PATCH v3 5/6] mmc: sdhci-esdhc-imx: config watermark level and burst length   Dong Aisheng
• [PATCH v3 5/6] mmc: sdhci-esdhc-imx: config watermark level and burst length   Dong Aisheng
• [PATCH v3 6/6] mmc: sdhci-esdhc-imx: set back the burst_length_enable bit to 1   Dong Aisheng
• [PATCH 1/4][v2] ARM: imx: imx7d-pinfunc: add gpio pad iomuxc settings   Adrian Alonso
• [PATCH 2/4][v2] ARM: dts: imx: imx7d add iomuxc lpsr register base address   Adrian Alonso
• [PATCH 3/4][v2] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Adrian Alonso
• [PATCH 4/4][v2] ARM: imx: pinctrl-imx7d: add iomuxc-lpsr gpio group ids   Adrian Alonso
• [PATCH][v3] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Adrian Alonso
• [PATCH 1/4][v3] ARM: imx: imx7d-pinfunc: add gpio pad iomuxc settings   Adrian Alonso
• [PATCH 2/4][v3] ARM: dts: imx: imx7d add iomuxc lpsr register base address   Adrian Alonso
• [PATCH 3/4][v3] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Adrian Alonso
• [PATCH 4/4][v3] ARM: imx: pinctrl-imx7d: add iomuxc-lpsr gpio group ids   Adrian Alonso
• [PATCH 1/4][v4] ARM: imx: imx7d-pinfunc: add gpio pad iomuxc settings   Adrian Alonso
• [PATCH 2/4][v4] ARM: dts: imx: imx7d add iomuxc lpsr register base address   Adrian Alonso
• [PATCH 3/4][v4] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Adrian Alonso
• [PATCH 4/4][v4] ARM: imx: pinctrl-imx7d: add iomuxc-lpsr gpio group ids   Adrian Alonso
• [PATCH 0/6] arm64 kexec kernel patches V8   Pratyush Anand
• [PATCH 0/2] arm64: some symbols blacklisted for kprobing   Pratyush Anand
• [PATCH 1/2] arm64: Blacklist non-kprobe-able symbols   Pratyush Anand
• [PATCH 2/2] arm64: Make all entry code as non-kprobe-able   Pratyush Anand
• [PATCH 1/2] arm64: Blacklist non-kprobe-able symbols   Pratyush Anand
• [PATCH 1/2] arm64: Blacklist non-kprobe-able symbols   Pratyush Anand
• [PATCH 2/2] arm64: Make all entry code as non-kprobe-able   Pratyush Anand
• [PATCH 1/2] arm64: Blacklist non-kprobe-able symbols   Pratyush Anand
• kexec crash kernel boot failure on arm64   Pratyush Anand
• [PATCH] arm64:ftrace: add save_stack_trace_regs()   Pratyush Anand
• [PATCH v2 0/4] Allow to use leds-ns2 with n090401 boards   Jacek Anaszewski
• [PATCH v2 0/3] Add DT support for netxbig LEDs   Jacek Anaszewski
• [PATCH v2 0/3] Add DT support for netxbig LEDs   Jacek Anaszewski
• [PATCH v2 2/4] ARM: Kirkwood: add modes-map property to ns2-leds nodes   Jacek Anaszewski
• [PATCH v2 0/9] regulator: pwm-regulator: Introduce continuous-mode   Doug Anderson
• [PATCH v1.1 1/4] ARM: dts: Add sbs-battery dts fragment used by chromebooks   Doug Anderson
• [PATCH 2/4] ARM: dts: rockchip: add shared rk3288-veyron files   Doug Anderson
• [PATCH 3/4] ARM: dts: rockchip: add veyron-jerry board   Doug Anderson
• [PATCH] phy: rockchip-usb: power down phy when rockchip phy probe   Doug Anderson
• [PATCH] clk: rockchip: Fix PLL bandwidth   Doug Anderson
• [PATCH 2/2] ARM: dts: rockchip: Add veyron-speedy board   Doug Anderson
• [RFC PATCH 0/3] clocksource: exynos_mct: allow mct to use 64-bit counter from coprocessor   Doug Anderson
• [RFC PATCH 0/3] clocksource: exynos_mct: allow mct to use 64-bit counter from coprocessor   Doug Anderson
• [PATCH] clk: rockchip: Fix PLL bandwidth   Douglas Anderson
• [PATCH] pinctrl: qcom: Hook pm_power_down for shutdown support   Bjorn Andersson
• [PATCH] Input: pmic8xxx-pwrkey - Support shutdown   Bjorn Andersson
• [PATCH v2] Input: pmic8xxx-pwrkey - Support shutdown   Bjorn Andersson
• [PATCH v3] Input: pmic8xxx-pwrkey - Support shutdown   Bjorn Andersson
• [PATCH] pinctrl: add support for Qualcomm Technologies QDF2xxx ARM64 SoCs   Bjorn Andersson
• [PATCH] [v2] pinctrl: add support for Qualcomm Technologies QDF2xxx ARM64 SoCs   Bjorn Andersson
• [PATCH v3 0/5] Qualcomm Shared Memory & RPM drivers   Bjorn Andersson
• [PATCH v1 1/7] ARM: dts: ifc6410: Add pwrseq support for WLAN   Bjorn Andersson
• [PATCHv2 0/4] Qualcomm Switch-Mode Battery Charger and Boost   Bjorn Andersson
• [PATCHv2 4/4] ARM: dts: qcom-pm8941: Add charger node   Bjorn Andersson
• [PATCH v7 01/13] clk: qcom: Add support for GDSCs   Bjorn Andersson
• [PATCH] ARM: psci: keystone: remove keystone_smp_ops code if psci is supported   Vitaly Andrianov
• [PATCH] keystone: dts: add psci command definition   Vitaly Andrianov
• [PATCH] keystone: dts: add psci command definition   Vitaly Andrianov
• [PATCH] ARM: mm: do not use virt_to_idmap() for NOMMU systems   Vitaly Andrianov
• [PATCH v2 0/2] Implement sample time consideration for Vybrid's ADC   Duan Andy
• [PATCH 3.19.y-ckt 173/251] clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier   Duan Andy
• [PATCH 3.19.y-ckt 173/251] clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier   Duan Andy
• [PATCH 3.19.y-ckt 173/251] clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier   Duan Andy
• [PATCH v1 2/4] ARM: imx6ul: add fec MAC refrence clock and phy fixup init   Duan Andy
• [PATCH v3 1/7] dt/bindings: Add binding for the Raspberry Pi clock provider   Eric Anholt
• Raspberry Pi 2 support, part 1: Interrupt controller   Eric Anholt
• [PATCH 1/4] irqchip: bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ.   Eric Anholt
• [PATCH 2/4] irqchip: bcm2835: If a parent interrupt is registered, chain from it.   Eric Anholt
• [PATCH 3/4] irqchip: Add documentation for the bcm2836 interrupt controller.   Eric Anholt
• [PATCH 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Eric Anholt
• [PATCH 3/4] irqchip: Add documentation for the bcm2836 interrupt controller.   Eric Anholt
• [PATCH 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Eric Anholt
• [PATCH 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Eric Anholt
• Raspberry Pi 2 interrupt controller support (v2) Second round   Eric Anholt
• [PATCH v2 1/4] irqchip: bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ.   Eric Anholt
• [PATCH v2 2/4] irqchip: bcm2835: If a parent interrupt is registered, chain from it.   Eric Anholt
• [PATCH v2 3/4] irqchip: Add documentation for the bcm2836 interrupt controller.   Eric Anholt
• [PATCH v2 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Eric Anholt
• [PATCH v7 1/3] dt/bindings: Add binding for the Raspberry Pi firmware driver   Eric Anholt
• [PATCH v7 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Eric Anholt
• [PATCH v7 3/3] ARM: bcm2835: Add the firmware driver information to the RPi DT   Eric Anholt
• [PATCH v4 0/8] Raspberry Pi clock support   Eric Anholt
• [PATCH v4 1/8] clk: bcm2835: Add binding docs for the Raspberry Pi clock provider   Eric Anholt
• [PATCH v4 2/8] clk: Add a Raspberry Pi-specific clock driver.   Eric Anholt
• [PATCH v4 3/8] ARM: bcm2835: Add DT for the firmware clocks driver.   Eric Anholt
• [PATCH v4 4/8] ARM: bcm2835: Drop never-used clock-frequency property of uart0.   Eric Anholt
• [PATCH v4 5/8] clk: bcm2835: Drop the fixed sys_pclk.   Eric Anholt
• [PATCH v4 6/8] ARM: bcm2835: Use the RPi firmware clocks for uart.   Eric Anholt
• [PATCH v4 7/8] ARM: bcm2835: Tie SPI clock to the core clock rate.   Eric Anholt
• [PATCH v4 8/8] ARM: bcm2835: Use the firmware on rpi to get the EMMC clock.   Eric Anholt
• [PATCH v2 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Eric Anholt
• [PATCH v2 2/4] irqchip: bcm2835: If a parent interrupt is registered, chain from it.   Eric Anholt
• [PATCH 1/2] MAINTAINERS: Add myself as a bcm2835 co-maintainer.   Eric Anholt
• [PATCH 2/2] MAINTAINERS: Explicitly add linux-arm-kernel for bcm2835   Eric Anholt
• [PATCH] irqchip: bcm2835: Add FIQ support   Eric Anholt
• Raspberry Pi 2 interrupt controller support (v3)   Eric Anholt
• [PATCH v3 1/4] irqchip: bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ.   Eric Anholt
• [PATCH v3 2/4] irqchip: bcm2835: Add support for being used as a second level controller.   Eric Anholt
• [PATCH v3 3/4] irqchip: Add documentation for the bcm2836 interrupt controller.   Eric Anholt
• [PATCH v3 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Eric Anholt
• [PATCH] irq-bcm2836: Move SMP boot to the irqchip code.   Eric Anholt
• [PATCH] irqchip: bcm2836: Use a CPU notifier enable IPIs.   Eric Anholt
• [PATCH 0/2] Add missing #iommu-cells on IOMMU nodes   Suman Anna
• [PATCH 1/2] ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs   Suman Anna
• [PATCH 2/2] ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs   Suman Anna
• [PATCH] ARM: OMAP2+: Remove module references from IOMMU machine layer   Suman Anna
• [PATCH] ARM: OMAP2+: Remove module references from IOMMU machine layer   Suman Anna
• [PATCH 0/4] Add DRA7 IOMMU DT nodes   Suman Anna
• [PATCH 1/4] ARM: dts: DRA7: Add dsp1_system syscon node   Suman Anna
• [PATCH 2/4] ARM: dts: DRA74x: Add dsp2_system syscon node   Suman Anna
• [PATCH 3/4] ARM: dts: DRA7: Add common IOMMU nodes   Suman Anna
• [PATCH 4/4] ARM: dts: DRA74x: Add IOMMU nodes for DSP2   Suman Anna
• [RFC 1/3] of: make of_mutex public   Pantelis Antoniou
• [PATCH 0/8] Use correctly the Xen memory terminologies in Linux   H. Peter Anvin
• [RFC 00/17] ARM IRQ forward control based on IRQ bypass manager   Eric Auger
• [RFC 01/17] VFIO: platform: test forwarded state when selecting IRQ handler   Eric Auger
• [RFC 02/17] VFIO: platform: single handler using function pointer   Eric Auger
• [RFC 03/17] VFIO: Introduce vfio_device_external_ops   Eric Auger
• [RFC 04/17] VFIO: pci: initialize vfio_device_external_ops   Eric Auger
• [RFC 05/17] VFIO: platform: implement vfio_device_external_ops callbacks   Eric Auger
• [RFC 06/17] VFIO: add vfio_external_{mask|is_active|set_automasked}   Eric Auger
• [RFC 07/17] KVM: arm: rename pause into power_off   Eric Auger
• [RFC 08/17] kvm: arm/arm64: implement kvm_arm_[halt,resume]_guest   Eric Auger
• [RFC 09/17] bypass: IRQ bypass manager proto by Alex   Eric Auger
• [RFC 10/17] KVM: arm: select IRQ_BYPASS_MANAGER   Eric Auger
• [RFC 11/17] VFIO: platform: select IRQ_BYPASS_MANAGER   Eric Auger
• [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control   Eric Auger
• [RFC 13/17] KVM: introduce kvm_arch functions for IRQ bypass   Eric Auger
• [RFC 14/17] KVM: arm/arm64: vgic: forwarding control   Eric Auger
• [RFC 15/17] KVM: arm/arm64: implement IRQ bypass consumer functions   Eric Auger
• [RFC 16/17] KVM: eventfd: add irq bypass consumer management   Eric Auger
• [RFC 17/17] VFIO: platform: add irq bypass producer management   Eric Auger
• [RFC 16/17] KVM: eventfd: add irq bypass consumer management   Eric Auger
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Eric Auger
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Eric Auger
• [PATCH 7/7] KVM: arm: implement kvm_set_msi by gsi direct mapping   Eric Auger
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Eric Auger
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Eric Auger
• [RFC 09/17] bypass: IRQ bypass manager proto by Alex   Eric Auger
• [PATCH 7/7] KVM: arm: implement kvm_set_msi by gsi direct mapping   Eric Auger
• [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control   Eric Auger
• [RFC 08/17] kvm: arm/arm64: implement kvm_arm_[halt, resume]_guest   Eric Auger
• [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control   Eric Auger
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Eric Auger
• [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control   Eric Auger
• [RFC 16/17] KVM: eventfd: add irq bypass consumer management   Eric Auger
• [RFC v2 0/6] IRQ bypass manager and irqfd consumer   Eric Auger
• [RFC v2 1/6] KVM: arm/arm64: select IRQ_BYPASS_MANAGER   Eric Auger
• [RFC v2 2/6] VFIO: platform: select IRQ_BYPASS_MANAGER   Eric Auger
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Eric Auger
• [RFC v2 4/6] KVM: create kvm_irqfd.h   Eric Auger
• [RFC v2 5/6] KVM: introduce kvm_arch functions for IRQ bypass   Eric Auger
• [RFC v2 6/6] KVM: eventfd: add irq bypass consumer management   Eric Auger
• [PATCH 0/2] KVM: arm/arm64: Guest synchronous halt/resume   Eric Auger
• [PATCH 1/2] KVM: arm: rename pause into power_off   Eric Auger
• [PATCH 2/2] kvm: arm/arm64: implement kvm_arm_[halt,resume]_guest   Eric Auger
• [RFC v2 0/9] ARM IRQ forward control based on IRQ bypass manager   Eric Auger
• [RFC v2 1/9] VFIO: platform: registration of a dummy IRQ bypass producer   Eric Auger
• [RFC v2 2/9] VFIO: platform: test forwarded state when selecting IRQ handler   Eric Auger
• [RFC v2 3/9] VFIO: platform: single handler using function pointer   Eric Auger
• [RFC v2 4/9] VFIO: platform: add vfio_platform_set_automasked   Eric Auger
• [RFC v2 5/9] VFIO: platform: add vfio_platform_is_active   Eric Auger
• [RFC v2 6/9] irq: bypass: add active field on producer side   Eric Auger
• [RFC v2 7/9] VFIO: platform: add irq bypass producer management   Eric Auger
• [RFC v2 8/9] KVM: arm/arm64: vgic: forwarding control   Eric Auger
• [RFC v2 9/9] KVM: arm/arm64: implement IRQ bypass consumer functions   Eric Auger
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Eric Auger
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Eric Auger
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Eric Auger
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Eric Auger
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Eric Auger
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Eric Auger
• [RFC v2 6/6] KVM: eventfd: add irq bypass consumer management   Eric Auger
• [PATCH 1/2] KVM: arm: rename pause into power_off   Eric Auger
• [PATCH 2/2] kvm: arm/arm64: implement kvm_arm_[halt, resume]_guest   Eric Auger
• [PATCH v2 0/7] KVM: arm/arm64: gsi routing support   Eric Auger
• [PATCH v2 1/7] KVM: api: introduce KVM_IRQ_ROUTING_EXTENDED_MSI   Eric Auger
• [PATCH v2 2/7] KVM: kvm_host: add devid in kvm_kernel_irq_routing_entry   Eric Auger
• [PATCH v2 3/7] KVM: irqchip: convey devid to kvm_set_msi   Eric Auger
• [PATCH v2 4/7] KVM: arm/arm64: enable irqchip routing   Eric Auger
• [PATCH v2 5/7] KVM: arm/arm64: build a default routing table   Eric Auger
• [PATCH v2 6/7] KVM: arm/arm64: enable MSI routing   Eric Auger
• [PATCH v2 7/7] KVM: arm: implement kvm_set_msi by gsi direct mapping   Eric Auger
• [PATCH v2 0/7] KVM: arm/arm64: gsi routing support   Eric Auger
• [PATCH v2 1/7] KVM: api: introduce KVM_IRQ_ROUTING_EXTENDED_MSI   Eric Auger
• [PATCH v2 4/7] KVM: arm/arm64: enable irqchip routing   Eric Auger
• Extensions for KVM MSI related ioctls   Eric Auger
• [PATCH v2 3/7] KVM: irqchip: convey devid to kvm_set_msi   Eric Auger
• [PATCH v2 7/7] KVM: arm: implement kvm_set_msi by gsi direct mapping   Eric Auger
• [PATCH v2 14/15] KVM: arm64: implement MSI injection in ITS emulation   Eric Auger
• [PATCH V4 2/6] mm: mlock: Add new mlock, munlock, and munlockall system calls   Vlastimil Babka
• [PATCH 3/3] arm: dts: ls1021a: Add snps, configure-gfladj property to USB3 node   Nikhil Badola
• [PATCH V4 2/6] mm: mlock: Add new mlock, munlock, and munlockall system calls   Ralf Baechle
• [PATCH] ARM: dts: omap5-uevm: Add Palmas power button support   Aparna Balasubramanian
• [PATCH 0/2] ARM: DTS: am437x-sk-evm: Use simple-card for audio support   Felipe Balbi
• [PATCH 1/2] ARM: DTS: am437x-sk-evm: Add sleep pin settings for mcasp1   Felipe Balbi
• [PATCH 2/2] ARM: DTS: am437x-sk-evm: Switch using simple-audio-card for audio support   Felipe Balbi
• [PATCH 2/2] ARM: DTS: am437x-sk-evm: Switch using simple-audio-card for audio support   Felipe Balbi
• [PATCH v2 01/20] ARM: omap2plus_defconfig: Enable audio related config options   Felipe Balbi
• [PATCH] base: power: wakeirq: don't leak dev->power.wakeirq   Felipe Balbi
• [PATCH] base: power: wakeirq: don't leak dev->power.wakeirq   Felipe Balbi
• [PATCH v5 1/3] musb: sunxi: Add support for the Allwinner sunxi musb controller   Felipe Balbi
• [PATCH] base: power: wakeirq: don't leak dev->power.wakeirq   Felipe Balbi
• [PATCH 2/3] i2c: omap: abolish variable name confusion   Felipe Balbi
• [PATCH v3] i2c: omap: improve duty cycle on SCL   Felipe Balbi
• musb-hdrc: "Vbus off, timeout 1100 msec" message does not belong in sysfs   Felipe Balbi
• [PATCH 1/3] i2c: omap: switch to dev_get_drvdata()   Felipe Balbi
• [PATCH 2/3] i2c: omap: abolish variable name confusion   Felipe Balbi
• [PATCH 3/3] i2c: omap: on ->remove() call pm_runtime_put_sync()   Felipe Balbi
• [PATCH] arm: dts: dra7: arch timer sits in always-on power domain   Felipe Balbi
• [PATCH] irqchip: omap-intc: improve IRQ handler   Felipe Balbi
• [PATCH RESEND] irqchip: omap-intc: improve IRQ handler   Felipe Balbi
• [PATCH RESEND] irqchip: omap-intc: improve IRQ handler   Felipe Balbi
• [PATCH v3 07/46] usb: dwc3: gadget: add ep capabilities support   Felipe Balbi
• [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs   Felipe Balbi
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Felipe Balbi
• [PATCH v4 04/46] staging: emxx_udc: add ep capabilities support   Felipe Balbi
• [PATCH v4 04/46] staging: emxx_udc: add ep capabilities support   Felipe Balbi
• [PATCH] drivers/usb/: Simplify return statements   Felipe Balbi
• [PATCH] drivers/usb/: Simplify return statements   Felipe Balbi
• [PATCH v5 02/46] usb: gadget: add endpoint capabilities flags   Felipe Balbi
• [PATCH 0/5] usb: gadget: miscellaneous fixes   Robert Baldyga
• [PATCH 1/5] usb: gadget: ffs: call functionfs_unbind() if _ffs_func_bind() fails   Robert Baldyga
• [PATCH 2/5] usb: gadget: midi: avoid redundant f_midi_set_alt() call   Robert Baldyga
• [PATCH 3/5] usb: isp1760: udc: add missing usb_ep_set_maxpacket_limit()   Robert Baldyga
• [PATCH 4/5] staging: emxx_udc: add missing usb_ep_set_maxpacket_limit()   Robert Baldyga
• [PATCH 5/5] usb: gadget: atmel_usba_udc: add missing ret value check   Robert Baldyga
• [PATCH 1/5] usb: gadget: ffs: call functionfs_unbind() if _ffs_func_bind() fails   Robert Baldyga
• [PATCH 3/5] usb: isp1760: udc: add missing usb_ep_set_maxpacket_limit()   Robert Baldyga
• [PATCH v2 0/5] usb: gadget: miscellaneous fixes   Robert Baldyga
• [PATCH v2 1/5] usb: gadget: ffs: call functionfs_unbind() if _ffs_func_bind() fails   Robert Baldyga
• [PATCH v2 2/5] usb: gadget: midi: avoid redundant f_midi_set_alt() call   Robert Baldyga
• [PATCH v2 3/5] usb: isp1760: udc: add missing usb_ep_set_maxpacket_limit()   Robert Baldyga
• [PATCH v2 4/5] staging: emxx_udc: add missing usb_ep_set_maxpacket_limit()   Robert Baldyga
• [PATCH v2 5/5] usb: gadget: atmel_usba_udc: add missing ret value check   Robert Baldyga
• [PATCH 00/37] usb: gadget: rework ep matching and claiming mechanism   Robert Baldyga
• [PATCH 01/37] usb: gadget: encapsulate endpoint claiming mechanism   Robert Baldyga
• [PATCH 02/37] usb: gadget: add endpoint capabilities flags   Robert Baldyga
• [PATCH 03/37] usb: gadget: add endpoint capabilities helper macros   Robert Baldyga
• [PATCH 04/37] staging: emxx_udc: add ep capabilities support   Robert Baldyga
• [PATCH 05/37] usb: chipidea: udc: add ep capabilities support   Robert Baldyga
• [PATCH 06/37] usb: dwc2: gadget: add ep capabilities support   Robert Baldyga
• [PATCH 07/37] usb: dwc3: gadget: add ep capabilities support   Robert Baldyga
• [PATCH 08/37] usb: gadget: amd5536udc: add ep capabilities support   Robert Baldyga
• [PATCH 09/37] usb: gadget: at91_udc: add ep capabilities support   Robert Baldyga
• [PATCH 10/37] usb: gadget: bcm63xx_udc: add ep capabilities support   Robert Baldyga
• [PATCH 11/37] usb: gadget: bdc: add ep capabilities support   Robert Baldyga
• [PATCH 12/37] usb: gadget: dummy-hcd: add ep capabilities support   Robert Baldyga
• [PATCH 13/37] usb: gadget: fotg210-udc: add ep capabilities support   Robert Baldyga
• [PATCH 14/37] usb: gadget: fsl_qe_udc: add ep capabilities support   Robert Baldyga
• [PATCH 15/37] usb: gadget: fsl_udc_core: add ep capabilities support   Robert Baldyga
• [PATCH 16/37] usb: gadget: fusb300_udc: add ep capabilities support   Robert Baldyga
• [PATCH 17/37] usb: gadget: goku_udc: add ep capabilities support   Robert Baldyga
• [PATCH 18/37] usb: gadget: gr_udc: add ep capabilities support   Robert Baldyga
• [PATCH 19/37] usb: gadget: lpc32xx_udc: add ep capabilities support   Robert Baldyga
• [PATCH 20/37] usb: gadget: m66592-udc: add ep capabilities support   Robert Baldyga
• [PATCH 21/37] usb: gadget: mv_u3d_core: add ep capabilities support   Robert Baldyga
• [PATCH 22/37] usb: gadget: mv_udc_core: add ep capabilities support   Robert Baldyga
• [PATCH 23/37] usb: gadget: net2272: add ep capabilities support   Robert Baldyga
• [PATCH 24/37] usb: gadget: net2280: add ep capabilities support   Robert Baldyga
• [PATCH 25/37] usb: gadget: omap_udc: add ep capabilities support   Robert Baldyga
• [PATCH 26/37] usb: gadget: pch_ud: add ep capabilities support   Robert Baldyga
• [PATCH 27/37] usb: gadget: pxa25x_udc: add ep capabilities support   Robert Baldyga
• [PATCH 28/37] usb: gadget: pxa27x_udc: add ep capabilities support   Robert Baldyga
• [PATCH 29/37] usb: gadget: r8a66597-udc: add ep capabilities support   Robert Baldyga
• [PATCH 30/37] usb: gadget: s3c-hsudc: add ep capabilities support   Robert Baldyga
• [PATCH 31/37] usb: gadget: s3c2410_udc: add ep capabilities support   Robert Baldyga
• [PATCH 32/37] usb: gadget: udc-xilinx: add ep capabilities support   Robert Baldyga
• [PATCH 33/37] usb: isp1760: udc: add ep capabilities support   Robert Baldyga
• [PATCH 34/37] usb: musb: gadget: add ep capabilities support   Robert Baldyga
• [PATCH 35/37] usb: renesas: gadget: add ep capabilities support   Robert Baldyga
• [PATCH 36/37] usb: gadget: atmel_usba_udc: add ep capabilities support   Robert Baldyga
• [PATCH 37/37] usb: gadget: epautoconf: add endpoint capabilities flags verification   Robert Baldyga
• [PATCH v3 0/5] usb: gadget: miscellaneous fixes   Robert Baldyga
• [PATCH v3 1/5] usb: gadget: ffs: call functionfs_unbind() if _ffs_func_bind() fails   Robert Baldyga
• [PATCH v3 2/5] usb: gadget: midi: avoid redundant f_midi_set_alt() call   Robert Baldyga
• [PATCH v3 3/5] usb: isp1760: udc: add missing usb_ep_set_maxpacket_limit()   Robert Baldyga
• [PATCH v3 4/5] staging: emxx_udc: add missing usb_ep_set_maxpacket_limit()   Robert Baldyga
• [PATCH v3 5/5] usb: gadget: atmel_usba_udc: add missing ret value check   Robert Baldyga
• [PATCH v2 00/48] usb: gadget: rework ep matching and claiming mechanism   Robert Baldyga
• [PATCH v2 01/48] usb: gadget: encapsulate endpoint claiming mechanism   Robert Baldyga
• [PATCH v2 02/48] usb: gadget: add endpoint capabilities flags   Robert Baldyga
• [PATCH v2 03/48] usb: gadget: add endpoint capabilities helper macros   Robert Baldyga
• [PATCH v2 04/48] staging: emxx_udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 05/48] usb: chipidea: udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 06/48] usb: dwc2: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v2 07/48] usb: dwc3: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v2 08/48] usb: gadget: amd5536udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 09/48] usb: gadget: at91_udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 10/48] usb: gadget: bcm63xx_udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 11/48] usb: gadget: bdc: add ep capabilities support   Robert Baldyga
• [PATCH v2 12/48] usb: gadget: dummy-hcd: add ep capabilities support   Robert Baldyga
• [PATCH v2 13/48] usb: gadget: fotg210-udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 14/48] usb: gadget: fsl_qe_udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 15/48] usb: gadget: fsl_udc_core: add ep capabilities support   Robert Baldyga
• [PATCH v2 16/48] usb: gadget: fusb300_udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 17/48] usb: gadget: goku_udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 18/48] usb: gadget: gr_udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 19/48] usb: gadget: lpc32xx_udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 20/48] usb: gadget: m66592-udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 21/48] usb: gadget: mv_u3d_core: add ep capabilities support   Robert Baldyga
• [PATCH v2 22/48] usb: gadget: mv_udc_core: add ep capabilities support   Robert Baldyga
• [PATCH v2 23/48] usb: gadget: net2272: add ep capabilities support   Robert Baldyga
• [PATCH v2 24/48] usb: gadget: net2280: add ep capabilities support   Robert Baldyga
• [PATCH v2 25/48] usb: gadget: omap_udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 26/48] usb: gadget: pch_ud: add ep capabilities support   Robert Baldyga
• [PATCH v2 27/48] usb: gadget: pxa25x_udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 28/48] usb: gadget: pxa27x_udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 29/48] usb: gadget: r8a66597-udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 30/48] usb: gadget: s3c-hsudc: add ep capabilities support   Robert Baldyga
• [PATCH v2 31/48] usb: gadget: s3c2410_udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 32/48] usb: gadget: udc-xilinx: add ep capabilities support   Robert Baldyga
• [PATCH v2 33/48] usb: isp1760: udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 34/48] usb: musb: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v2 35/48] usb: renesas: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v2 36/48] usb: gadget: atmel_usba_udc: add ep capabilities support   Robert Baldyga
• [PATCH v2 37/48] usb: gadget: epautoconf: add endpoint capabilities flags verification   Robert Baldyga
• [PATCH v2 38/48] usb: gadget: epautoconf: remove pxa quirk from ep_matches()   Robert Baldyga
• [PATCH v2 39/48] usb: gadget: epautoconf: remove ep and desc configuration from ep_matches()   Robert Baldyga
• [PATCH v2 40/48] usb: gadget: epautoconf: rework ep_matches() function   Robert Baldyga
• [PATCH v2 41/48] usb: gadget: add 'ep_match' callback to usb_gadget_ops   Robert Baldyga
• [PATCH v2 42/48] usb: gadget: epautoconf: use 'ep_match' gadget callback   Robert Baldyga
• [PATCH v2 43/48] usb: gadget: udc: add usb_gadget_ep_match_desc() function   Robert Baldyga
• [PATCH v2 44/48] usb: gadget: epautoconf: remove ep_matches() function   Robert Baldyga
• [PATCH v2 45/48] usb: gadget: net2280: add net2280_match_ep() function   Robert Baldyga
• [PATCH v2 46/48] usb: gadget: goku_udc: add goku_match_ep() function   Robert Baldyga
• [PATCH v2 47/48] usb: musb: gadget: add musb_match_ep() function   Robert Baldyga
• [PATCH v2 48/48] usb: gadget: epautoconf: cleanup dead code   Robert Baldyga
• [PATCH v3 00/46] usb: gadget: rework ep matching and claiming mechanism   Robert Baldyga
• [PATCH v3 01/46] usb: gadget: encapsulate endpoint claiming mechanism   Robert Baldyga
• [PATCH v3 02/46] usb: gadget: add endpoint capabilities flags   Robert Baldyga
• [PATCH v3 03/46] usb: gadget: add endpoint capabilities helper macros   Robert Baldyga
• [PATCH v3 04/46] staging: emxx_udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 05/46] usb: chipidea: udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 06/46] usb: dwc2: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v3 07/46] usb: dwc3: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v3 08/46] usb: gadget: amd5536udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 09/46] usb: gadget: at91_udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 10/46] usb: gadget: bcm63xx_udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 11/46] usb: gadget: bdc: add ep capabilities support   Robert Baldyga
• [PATCH v3 12/46] usb: gadget: dummy-hcd: add ep capabilities support   Robert Baldyga
• [PATCH v3 13/46] usb: gadget: fotg210-udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 14/46] usb: gadget: fsl_qe_udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 15/46] usb: gadget: fsl_udc_core: add ep capabilities support   Robert Baldyga
• [PATCH v3 16/46] usb: gadget: fusb300_udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 17/46] usb: gadget: goku_udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 18/46] usb: gadget: gr_udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 19/46] usb: gadget: lpc32xx_udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 20/46] usb: gadget: m66592-udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 21/46] usb: gadget: mv_u3d_core: add ep capabilities support   Robert Baldyga
• [PATCH v3 22/46] usb: gadget: mv_udc_core: add ep capabilities support   Robert Baldyga
• [PATCH v3 23/46] usb: gadget: net2272: add ep capabilities support   Robert Baldyga
• [PATCH v3 24/46] usb: gadget: net2280: add ep capabilities support   Robert Baldyga
• [PATCH v3 25/46] usb: gadget: omap_udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 26/46] usb: gadget: pch_ud: add ep capabilities support   Robert Baldyga
• [PATCH v3 27/46] usb: gadget: pxa25x_udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 28/46] usb: gadget: pxa27x_udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 29/46] usb: gadget: r8a66597-udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 30/46] usb: gadget: s3c-hsudc: add ep capabilities support   Robert Baldyga
• [PATCH v3 31/46] usb: gadget: s3c2410_udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 32/46] usb: gadget: udc-xilinx: add ep capabilities support   Robert Baldyga
• [PATCH v3 33/46] usb: isp1760: udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 34/46] usb: musb: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v3 35/46] usb: renesas: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v3 36/46] usb: gadget: atmel_usba_udc: add ep capabilities support   Robert Baldyga
• [PATCH v3 37/46] usb: gadget: epautoconf: add endpoint capabilities flags verification   Robert Baldyga
• [PATCH v3 38/46] usb: gadget: epautoconf: remove pxa quirk from ep_matches()   Robert Baldyga
• [PATCH v3 39/46] usb: gadget: epautoconf: remove ep and desc configuration from ep_matches()   Robert Baldyga
• [PATCH v3 40/46] usb: gadget: epautoconf: rework ep_matches() function   Robert Baldyga
• [PATCH v3 41/46] usb: gadget: add 'ep_match' callback to usb_gadget_ops   Robert Baldyga
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Robert Baldyga
• [PATCH v3 43/46] usb: gadget: move find_ep() from epautoconf to gadget.h   Robert Baldyga
• [PATCH v3 44/46] usb: gadget: net2280: add net2280_match_ep() function   Robert Baldyga
• [PATCH v3 45/46] usb: gadget: goku_udc: add goku_match_ep() function   Robert Baldyga
• [PATCH v3 46/46] usb: musb: gadget: add musb_match_ep() function   Robert Baldyga
• [PATCH v3 26/46] usb: gadget: pch_ud: add ep capabilities support   Robert Baldyga
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Robert Baldyga
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Robert Baldyga
• [PATCH v4 00/46] usb: gadget: rework ep matching and claiming mechanism   Robert Baldyga
• [PATCH v4 01/46] usb: gadget: encapsulate endpoint claiming mechanism   Robert Baldyga
• [PATCH v4 02/46] usb: gadget: add endpoint capabilities flags   Robert Baldyga
• [PATCH v4 03/46] usb: gadget: add endpoint capabilities helper macros   Robert Baldyga
• [PATCH v4 04/46] staging: emxx_udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 05/46] usb: chipidea: udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 06/46] usb: dwc2: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v4 07/46] usb: dwc3: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v4 08/46] usb: gadget: amd5536udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 09/46] usb: gadget: at91_udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 10/46] usb: gadget: bcm63xx_udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 11/46] usb: gadget: bdc: add ep capabilities support   Robert Baldyga
• [PATCH v4 12/46] usb: gadget: dummy-hcd: add ep capabilities support   Robert Baldyga
• [PATCH v4 13/46] usb: gadget: fotg210-udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 14/46] usb: gadget: fsl_qe_udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 15/46] usb: gadget: fsl_udc_core: add ep capabilities support   Robert Baldyga
• [PATCH v4 16/46] usb: gadget: fusb300_udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 17/46] usb: gadget: goku_udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 18/46] usb: gadget: gr_udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 19/46] usb: gadget: lpc32xx_udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 20/46] usb: gadget: m66592-udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 21/46] usb: gadget: mv_u3d_core: add ep capabilities support   Robert Baldyga
• [PATCH v4 22/46] usb: gadget: mv_udc_core: add ep capabilities support   Robert Baldyga
• [PATCH v4 23/46] usb: gadget: net2272: add ep capabilities support   Robert Baldyga
• [PATCH v4 24/46] usb: gadget: net2280: add ep capabilities support   Robert Baldyga
• [PATCH v4 25/46] usb: gadget: omap_udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 26/46] usb: gadget: pch_udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 27/46] usb: gadget: pxa25x_udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 28/46] usb: gadget: pxa27x_udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 29/46] usb: gadget: r8a66597-udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 30/46] usb: gadget: s3c-hsudc: add ep capabilities support   Robert Baldyga
• [PATCH v4 31/46] usb: gadget: s3c2410_udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 32/46] usb: gadget: udc-xilinx: add ep capabilities support   Robert Baldyga
• [PATCH v4 33/46] usb: isp1760: udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 34/46] usb: musb: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v4 35/46] usb: renesas: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v4 36/46] usb: gadget: atmel_usba_udc: add ep capabilities support   Robert Baldyga
• [PATCH v4 37/46] usb: gadget: epautoconf: add endpoint capabilities flags verification   Robert Baldyga
• [PATCH v4 38/46] usb: gadget: epautoconf: remove pxa quirk from ep_matches()   Robert Baldyga
• [PATCH v4 39/46] usb: gadget: epautoconf: remove ep and desc configuration from ep_matches()   Robert Baldyga
• [PATCH v4 40/46] usb: gadget: epautoconf: rework ep_matches() function   Robert Baldyga
• [PATCH v4 41/46] usb: gadget: add 'ep_match' callback to usb_gadget_ops   Robert Baldyga
• [PATCH v4 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Robert Baldyga
• [PATCH v4 43/46] usb: gadget: move find_ep() from epautoconf to gadget.h   Robert Baldyga
• [PATCH v4 44/46] usb: gadget: net2280: add net2280_match_ep() function   Robert Baldyga
• [PATCH v4 45/46] usb: gadget: goku_udc: add goku_match_ep() function   Robert Baldyga
• [PATCH v4 46/46] usb: musb: gadget: add musb_match_ep() function   Robert Baldyga
• [PATCH 0/7] usb: gadget: get rid of UDC name-based quirks   Robert Baldyga
• [PATCH 1/7] usb: gadget: add 'quirk_altset_not_supp' to usb_gadget   Robert Baldyga
• [PATCH 2/7] usb: gadget: add 'quirk_stall_not_supp' to usb_gadget   Robert Baldyga
• [PATCH 3/7] usb: gadget: add 'quirk_zlp_not_supp' to usb_gadget   Robert Baldyga
• [PATCH 4/7] usb: gadget: f_mass_storage: check quirk instead of UDC name   Robert Baldyga
• [PATCH 5/7] usb: gadget: f_ecm/f_ncm: check quirk instead of UDC name   Robert Baldyga
• [PATCH 6/7] usb: gadget: apply generic altsetting support check mechanism   Robert Baldyga
• [PATCH 7/7] usb: gadget: remove gadget_chips.h   Robert Baldyga
• [PATCH v4 04/46] staging: emxx_udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 00/46] usb: gadget: rework ep matching and claiming mechanism   Robert Baldyga
• [PATCH v5 01/46] usb: gadget: encapsulate endpoint claiming mechanism   Robert Baldyga
• [PATCH v5 02/46] usb: gadget: add endpoint capabilities flags   Robert Baldyga
• [PATCH v5 03/46] usb: gadget: add endpoint capabilities helper macros   Robert Baldyga
• [PATCH v5 04/46] staging: emxx_udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 05/46] usb: chipidea: udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 06/46] usb: dwc2: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v5 07/46] usb: dwc3: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v5 08/46] usb: gadget: amd5536udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 09/46] usb: gadget: at91_udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 10/46] usb: gadget: bcm63xx_udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 11/46] usb: gadget: bdc: add ep capabilities support   Robert Baldyga
• [PATCH v5 12/46] usb: gadget: dummy-hcd: add ep capabilities support   Robert Baldyga
• [PATCH v5 13/46] usb: gadget: fotg210-udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 14/46] usb: gadget: fsl_qe_udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 15/46] usb: gadget: fsl_udc_core: add ep capabilities support   Robert Baldyga
• [PATCH v5 16/46] usb: gadget: fusb300_udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 17/46] usb: gadget: goku_udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 18/46] usb: gadget: gr_udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 19/46] usb: gadget: lpc32xx_udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 20/46] usb: gadget: m66592-udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 21/46] usb: gadget: mv_u3d_core: add ep capabilities support   Robert Baldyga
• [PATCH v5 22/46] usb: gadget: mv_udc_core: add ep capabilities support   Robert Baldyga
• [PATCH v5 23/46] usb: gadget: net2272: add ep capabilities support   Robert Baldyga
• [PATCH v5 24/46] usb: gadget: net2280: add ep capabilities support   Robert Baldyga
• [PATCH v5 25/46] usb: gadget: omap_udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 26/46] usb: gadget: pch_udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 27/46] usb: gadget: pxa25x_udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 28/46] usb: gadget: pxa27x_udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 29/46] usb: gadget: r8a66597-udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 30/46] usb: gadget: s3c-hsudc: add ep capabilities support   Robert Baldyga
• [PATCH v5 31/46] usb: gadget: s3c2410_udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 32/46] usb: gadget: udc-xilinx: add ep capabilities support   Robert Baldyga
• [PATCH v5 33/46] usb: isp1760: udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 34/46] usb: musb: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v5 35/46] usb: renesas: gadget: add ep capabilities support   Robert Baldyga
• [PATCH v5 36/46] usb: gadget: atmel_usba_udc: add ep capabilities support   Robert Baldyga
• [PATCH v5 37/46] usb: gadget: epautoconf: add endpoint capabilities flags verification   Robert Baldyga
• [PATCH v5 38/46] usb: gadget: epautoconf: remove pxa quirk from ep_matches()   Robert Baldyga
• [PATCH v5 39/46] usb: gadget: epautoconf: remove ep and desc configuration from ep_matches()   Robert Baldyga
• [PATCH v5 40/46] usb: gadget: epautoconf: rework ep_matches() function   Robert Baldyga
• [PATCH v5 41/46] usb: gadget: add 'ep_match' callback to usb_gadget_ops   Robert Baldyga
• [PATCH v5 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Robert Baldyga
• [PATCH v5 43/46] usb: gadget: move find_ep() from epautoconf to gadget.h   Robert Baldyga
• [PATCH v5 44/46] usb: gadget: net2280: add net2280_match_ep() function   Robert Baldyga
• [PATCH v5 45/46] usb: gadget: goku_udc: add goku_match_ep() function   Robert Baldyga
• [PATCH v5 46/46] usb: musb: gadget: add musb_match_ep() function   Robert Baldyga
• [PATCH V2 4/5] drivers/rtc/rtc-ds1307.c: Support optional wakeup interrupt source   Alexandre Belloni
• [PATCH] rtc-mt6397: enable wakeup before registering rtc device   Alexandre Belloni
• [PATCH V2 0/5] drivers/rtc/rtc-ds1307.c: Basic cleanups and support for wakeupirq   Alexandre Belloni
• [PATCH] pinctrl: at91: fix null pointer dereference   Alexandre Belloni
• [RESEND PATCH-v2] rtc: 88pm80x: add device tree support   Alexandre Belloni
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Alexandre Belloni
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Alexandre Belloni
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Alexandre Belloni
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Alexandre Belloni
• [PATCH] rtc: snvs: select option REGMAP_MMIO   Alexandre Belloni
• [rtc-linux] [PATCH v4 3/7] rtc: mxc: use a second rtc clock   Alexandre Belloni
• [rtc-linux] [PATCH v4 4/7] rtc: mxc: add support of device tree   Alexandre Belloni
• [rtc-linux] [RESEND PATCH-v2] rtc: 88pm80x: add device tree support   Alexandre Belloni
• [PATCH 2/2] at91: use request_irq/free_irq instead of setup_irq/remove_irq   Alexandre Belloni
• [PATCH 0/3] clocksource: at91: Remove irq handler when clock event is unused   Alexandre Belloni
• [PATCH 1/3] clocksource: atmel-st: Remove irq handler when clock event is unused   Alexandre Belloni
• [PATCH 2/3] clocksource: atmel-pit: drop at91sam926x_pit_common_init   Alexandre Belloni
• [PATCH 3/3] clocksource: atmel-pit: Remove irq handler when clock event is unused   Alexandre Belloni
• [PATCH 3/3] clocksource: atmel-pit: Remove irq handler when clock event is unused   Alexandre Belloni
• [PATCH 1/3] clocksource: atmel-st: Remove irq handler when clock event is unused   Alexandre Belloni
• [PATCH 1/7] ARM: at91: Remove clk-provider.h include   Alexandre Belloni
• [PATCH v2 1/2] power: reset: at91: add sama5d3 reset function   Alexandre Belloni
• [PATCH v2 2/2] ARM: at91: sama5/dt: update rstc to correct compatible string   Alexandre Belloni
• [PATCH] tty/serial: atmel: use proper accessors   Alexandre Belloni
• [PATCH 1/3] clocksource: atmel-st: Remove irq handler when clock event is unused   Alexandre Belloni
• [PATCH] tty/serial: atmel: use proper accessors   Alexandre Belloni
• [PATCH v3 0/2] RTC support for NXP LPC18xx family   Alexandre Belloni
• [PATCH v2 1/3] ARM: at91/soc: add basic support for new sama5d2 SoC   Alexandre Belloni
• [PATCH v2 3/3] ARM: at91/dt: add minimal sama5d2 Xplained board   Alexandre Belloni
• [PATCH v2 2/3] ARM: at91/dt: add basic dtsi for sama5d2 SoC   Alexandre Belloni
• [PATCH v4 4/5] tty/serial: at91: add support to FIFOs   Alexandre Belloni
• [PATCH 00/20] ARM: at91: Properly handle slow clock   Alexandre Belloni
• [PATCH 01/20] Documentation: dt: atmel-at91: add clocks to system timer, rstc and shdwc   Alexandre Belloni
• [PATCH 02/20] Documentation: watchdog: at91sam9_wdt: add clocks property   Alexandre Belloni
• [PATCH 03/20] Documentation: dt: rtc: at91rm9200: add clocks property   Alexandre Belloni
• [PATCH 04/20] ARM: at91/dt: at91rm9200: use slow clock where necessary   Alexandre Belloni
• [PATCH 05/20] ARM: at91/dt: at91sam9260: use slow clock where necessary   Alexandre Belloni
• [PATCH 06/20] ARM: at91/dt: at91sam9261: use slow clock where necessary   Alexandre Belloni
• [PATCH 07/20] ARM: at91/dt: at91sam9263: use slow clock where necessary   Alexandre Belloni
• [PATCH 08/20] ARM: at91/dt: at91sam9g45: use slow clock where necessary   Alexandre Belloni
• [PATCH 09/20] ARM: at91/dt: at91sam9n12: use slow clock where necessary   Alexandre Belloni
• [PATCH 10/20] ARM: at91/dt: at91sam9rl: use slow clock where necessary   Alexandre Belloni
• [PATCH 11/20] ARM: at91/dt: at91sam9x5: use slow clock where necessary   Alexandre Belloni
• [PATCH 12/20] ARM: at91/dt: sama5d3: use slow clock where necessary   Alexandre Belloni
• [PATCH 13/20] ARM: at91/dt: sama5d4: use slow clock where necessary   Alexandre Belloni
• [PATCH 14/20] rtc: at91rm9200: get and use slow clock   Alexandre Belloni
• [PATCH 15/20] watchdog: at91sam9: get and use slow clock   Alexandre Belloni
• [PATCH 16/20] power/reset: at91-reset: remove useless at91_reset_platform_probe()   Alexandre Belloni
• [PATCH 17/20] power/reset: at91-reset: get and use slow clock   Alexandre Belloni
• [PATCH 18/20] power/reset: at91-poweroff: get and use slow clock   Alexandre Belloni
• [PATCH 19/20] clocksource: atmel-st: get and use slow clock   Alexandre Belloni
• [PATCH 20/20] clk: at91: Revert "keep slow clk enabled to prevent system hang"   Alexandre Belloni
• [PATCH 1/5] rtc: at91sam9: properly handle error case   Alexandre Belloni
• [PATCH 2/5] rtc: at91sam9: remove useless check   Alexandre Belloni
• [PATCH 3/5] rtc: at91sam9: sort headers alphabetically   Alexandre Belloni
• [PATCH 4/5] rtc: at91sam9: get sclk rate after enabling it   Alexandre Belloni
• [PATCH 5/5] rtc: at91rm9200: sort headers alphabetically   Alexandre Belloni
• [PATCH v3 2/3] ARM: at91/dt: add basic dtsi for sama5d2 SoC   Alexandre Belloni
• [PATCH linux-next 1/1] tty/serial: at91: fix I/O accesses on RHR and THR for AVR32   Alexandre Belloni
• [PATCH 00/23] ARM: at91: Properly handle slow clock   Alexandre Belloni
• [PATCH 01/23] Documentation: dt: atmel-at91: add clocks to system timer, rstc and shdwc   Alexandre Belloni
• [PATCH 02/23] Documentation: dt: atmel-at91: add slow clock to tcb   Alexandre Belloni
• [PATCH 03/23] Documentation: watchdog: at91sam9_wdt: add clocks property   Alexandre Belloni
• [PATCH 04/23] Documentation: dt: rtc: at91rm9200: add clocks property   Alexandre Belloni
• [PATCH 05/23] ARM: at91/dt: at91rm9200: use slow clock where necessary   Alexandre Belloni
• [PATCH 06/23] ARM: at91/dt: at91sam9260: use slow clock where necessary   Alexandre Belloni
• [PATCH 07/23] ARM: at91/dt: at91sam9261: use slow clock where necessary   Alexandre Belloni
• [PATCH 08/23] ARM: at91/dt: at91sam9263: use slow clock where necessary   Alexandre Belloni
• [PATCH 09/23] ARM: at91/dt: at91sam9g45: use slow clock where necessary   Alexandre Belloni
• [PATCH 10/23] ARM: at91/dt: at91sam9n12: use slow clock where necessary   Alexandre Belloni
• [PATCH 11/23] ARM: at91/dt: at91sam9rl: use slow clock where necessary   Alexandre Belloni
• [PATCH 12/23] ARM: at91/dt: at91sam9x5: use slow clock where necessary   Alexandre Belloni
• [PATCH 13/23] ARM: at91/dt: sama5d3: use slow clock where necessary   Alexandre Belloni
• [PATCH 14/23] ARM: at91/dt: sama5d4: use slow clock where necessary   Alexandre Belloni
• [PATCH 15/23] rtc: at91rm9200: get and use slow clock   Alexandre Belloni
• [PATCH 16/23] watchdog: at91sam9: get and use slow clock   Alexandre Belloni
• [PATCH 17/23] power/reset: at91-reset: remove useless at91_reset_platform_probe()   Alexandre Belloni
• [PATCH 18/23] power/reset: at91-reset: get and use slow clock   Alexandre Belloni
• [PATCH 19/23] power/reset: at91-poweroff: get and use slow clock   Alexandre Belloni
• [PATCH 20/23] clocksource: atmel-st: get and use slow clock   Alexandre Belloni
• [PATCH 21/23] clocksource: tcb_clksrc: fix setup_clkevents error path   Alexandre Belloni
• [PATCH 22/23] misc: atmel_tclib: get and use slow clock   Alexandre Belloni
• [PATCH 23/23] clk: at91: Revert "keep slow clk enabled to prevent system hang"   Alexandre Belloni
• [PATCH 00/23] ARM: at91: Properly handle slow clock   Alexandre Belloni
• [PATCH 00/23] ARM: at91: Properly handle slow clock   Alexandre Belloni
• [PATCH] ARM: at91: pwm: atmel-hlcdc: add at91sam9n12 entry for the errata   Alexandre Belloni
• [PATCH 23/23] clk: at91: Revert "keep slow clk enabled to prevent system hang"   Alexandre Belloni
• [PATCH 23/23] clk: at91: Revert "keep slow clk enabled to prevent system hang"   Alexandre Belloni
• [PATCH 23/23] clk: at91: Revert "keep slow clk enabled to prevent system hang"   Alexandre Belloni
• [PATCH] drm: panel: simple: add QiaoDian qd43003c0-40   Alexandre Belloni
• [PATCH 0/9] ARM: at91: dt and defconfig updates   Alexandre Belloni
• [PATCH 1/9] ARM: at91/dt: define hlcdc node in at91sam9x5_lcd.dtsi   Alexandre Belloni
• [PATCH 2/9] ARM: at91/dt: include lcd dtsi in at91sam9x5 dtsis   Alexandre Belloni
• [PATCH 3/9] ARM: at91/dt: add at91sam9x5-ek Display Module dtsi   Alexandre Belloni
• [PATCH 4/9] ARM: at91/dt: enable lcd support for at91sam9x5 SoCs   Alexandre Belloni
• [PATCH 5/9] ARM: at91/dt: add drm support for at91sam9n12ek   Alexandre Belloni
• [PATCH 6/9] ARM: at91/defconfig: at91_dt: enable DRM hlcdc support   Alexandre Belloni
• [PATCH 7/9] ARM: at91/defconfig: at91_dt: remove ARM_AT91_ETHER   Alexandre Belloni
• [PATCH 8/9] ARM: at91/dt: at91sam9x5dm: add support for the touschscreen   Alexandre Belloni
• [PATCH 9/9] ARM: at91/dt: at91sam9x5dm: add QT1070 touch button controller   Alexandre Belloni
• [GIT PULL] hwspinlock for 4.2   Ohad Ben-Cohen
• [GIT PULL] remoteproc for 4.2   Ohad Ben-Cohen
• [PATCH v7 00/11] KVM Guest Debug support for arm64   Alex Bennée
• [PATCH v7 01/11] KVM: add comments for kvm_debug_exit_arch struct   Alex Bennée
• [PATCH v7 02/11] KVM: arm64: guest debug, define API headers   Alex Bennée
• [PATCH v7 03/11] KVM: arm: guest debug, add stub KVM_SET_GUEST_DEBUG ioctl   Alex Bennée
• [PATCH v7 04/11] KVM: arm: introduce kvm_arm_init/setup/clear_debug   Alex Bennée
• [PATCH v7 05/11] KVM: arm64: guest debug, add SW break point support   Alex Bennée
• [PATCH v7 06/11] KVM: arm64: guest debug, add support for single-step   Alex Bennée
• [PATCH v7 07/11] KVM: arm64: re-factor hyp.S debug register code   Alex Bennée
• [PATCH v7 08/11] KVM: arm64: introduce vcpu->arch.debug_ptr   Alex Bennée
• [PATCH v7 09/11] KVM: arm64: guest debug, HW assisted debug support   Alex Bennée
• [PATCH v7 10/11] KVM: arm64: enable KVM_CAP_SET_GUEST_DEBUG   Alex Bennée
• [PATCH v7 11/11] KVM: arm64: add trace points for guest_debug debug   Alex Bennée
• [PATCH v7 09/11] KVM: arm64: guest debug, HW assisted debug support   Alex Bennée
• [PATCH v7 08/11] KVM: arm64: introduce vcpu->arch.debug_ptr   Alex Bennée
• [PATCH v7 09/11] KVM: arm64: guest debug, HW assisted debug support   Alex Bennée
• [PATCH v7 09/11] KVM: arm64: guest debug, HW assisted debug support   Alex Bennée
• [PATCH v8 00/11] KVM Guest Debug support for arm64   Alex Bennée
• [PATCH v8 01/11] KVM: add comments for kvm_debug_exit_arch struct   Alex Bennée
• [PATCH v8 02/11] KVM: arm64: guest debug, define API headers   Alex Bennée
• [PATCH v8 03/11] KVM: arm: guest debug, add stub KVM_SET_GUEST_DEBUG ioctl   Alex Bennée
• [PATCH v8 04/11] KVM: arm: introduce kvm_arm_init/setup/clear_debug   Alex Bennée
• [PATCH v8 05/11] KVM: arm64: guest debug, add SW break point support   Alex Bennée
• [PATCH v8 06/11] KVM: arm64: guest debug, add support for single-step   Alex Bennée
• [PATCH v8 07/11] KVM: arm64: re-factor hyp.S debug register code   Alex Bennée
• [PATCH v8 08/11] KVM: arm64: introduce vcpu->arch.debug_ptr   Alex Bennée
• [PATCH v8 09/11] KVM: arm64: guest debug, HW assisted debug support   Alex Bennée
• [PATCH v8 10/11] KVM: arm64: enable KVM_CAP_SET_GUEST_DEBUG   Alex Bennée
• [PATCH v8 11/11] KVM: arm64: add trace points for guest_debug debug   Alex Bennée
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Arnd Bergmann
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Arnd Bergmann
• [PATCH 1/2] ARM: ux500: define serial port aliases   Arnd Bergmann
• [1/2] RTC: Add core rtc support for Gemini Soc devices   Arnd Bergmann
• [PATCH v2 0/2] pci: xgene: Add multiple memory ranges support   Arnd Bergmann
• [PATCH 1/2] ARM: ux500: define serial port aliases   Arnd Bergmann
• Gemini Soc timers   Arnd Bergmann
• [PATCH] ARM: BCM: Restrict Broadcom BCM470X / BCM5301X to non-LPAE   Arnd Bergmann
• [PATCH] ARM: orion5x: fix legacy orion5x IRQ numbers   Arnd Bergmann
• [PATCH 1/2] ARM: ux500: define serial port aliases   Arnd Bergmann
• [PATCH 4/4] arm64: dts: Add Broadcom North Star 2 support   Arnd Bergmann
• [PATCH] dmaengine: fsl-edma: add PM suspend/resume support   Arnd Bergmann
• [PATCH] ARM: BCM: Restrict Broadcom BCM470X / BCM5301X to non-LPAE   Arnd Bergmann
• [PATCH] dmaengine: fsl-edma: add PM suspend/resume support   Arnd Bergmann
• [PATCH] ARM: BCM: Restrict Broadcom BCM470X / BCM5301X to non-LPAE   Arnd Bergmann
• [PATCH 1/2] ARM: ux500: define serial port aliases   Arnd Bergmann
• [PATCH] ARM: BCM: Restrict Broadcom BCM470X / BCM5301X to non-LPAE   Arnd Bergmann
• [PATCH 5/5] PCI: Add host drivers for Cavium ThunderX processors.   Arnd Bergmann
• [PATCH 1/2] ARM: ux500: define serial port aliases   Arnd Bergmann
• Linux on Armada 370   Arnd Bergmann
• [PATCH] PCI: iproc: Fix BCMA dependency in Kconfig   Arnd Bergmann
• [PATCH] dmaengine: xgene-dma: Add ACPI support for X-Gene DMA engine driver   Arnd Bergmann
• [RFC] arm64: defconfig: enable 48-bit VA by default   Arnd Bergmann
• [RFC 0/2] VFIO: Add virtual MSI doorbell support.   Bhushan Bharat
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   Eric W. Biederman
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   Eric W. Biederman
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   Eric W. Biederman
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   Eric W. Biederman
• [PATCH] arm: dma-mapping: fix off-by-one error in bitmap size check   Ard Biesheuvel
• [PATCH] crypto: arm: ignore generated SHA2 assembly files   Ard Biesheuvel
• [PATCH] arm64: remove another unnecessary libfdt include path   Ard Biesheuvel
• [PATCH] arm64: remove dead code   Ard Biesheuvel
• [PATCH] arm64: remove dead code   Ard Biesheuvel
• [PATCH] arm64: remove dead code   Ard Biesheuvel
• [PATCH] arm64/efi: prefer AllocatePages() over efi_low_alloc() for vmlinux   Ard Biesheuvel
• [PATCH] arm64/efi: prefer AllocatePages() over efi_low_alloc() for vmlinux   Ard Biesheuvel
• [PATCH v2] arm64/efi: prefer AllocatePages() over efi_low_alloc() for vmlinux   Ard Biesheuvel
• [PATCH] arm64/efi: map the entire UEFI vendor string before reading it   Ard Biesheuvel
• [PATCH] arm64/efi: map the entire UEFI vendor string before reading it   Ard Biesheuvel
• [PATCH v2] arm64/efi: prefer AllocatePages() over efi_low_alloc() for vmlinux   Ard Biesheuvel
• bug in identity map for 4KB pages?   Ard Biesheuvel
• [PATCH 0/2] arm64/efi: fix kernel allocation at base of DRAM   Ard Biesheuvel
• [PATCH 1/2] efi: add 'offset' param to efi_low_alloc()   Ard Biesheuvel
• [PATCH 2/2] arm64/efi: use efi_low_alloc() with offset to allocate kernel   Ard Biesheuvel
• [PATCH] arm64/Documentation: clarify wording regarding memory below the Image   Ard Biesheuvel
• bug in identity map for 4KB pages?   Ard Biesheuvel
• bug in identity map for 4KB pages?   Ard Biesheuvel
• bug in identity map for 4KB pages?   Ard Biesheuvel
• bug in identity map for 4KB pages?   Ard Biesheuvel
• bug in identity map for 4KB pages?   Ard Biesheuvel
• [PATCH] arm64: override early_init_dt_add_memory_arch()   Ard Biesheuvel
• bug in identity map for 4KB pages?   Ard Biesheuvel
• [RFC] arm64: defconfig: enable 48-bit VA by default   Ard Biesheuvel
• bug in identity map for 4KB pages?   Ard Biesheuvel
• [RFC] arm64: defconfig: enable 48-bit VA by default   Ard Biesheuvel
• [PATCH] arm64: override early_init_dt_add_memory_arch()   Ard Biesheuvel
• [PATCH 1/2] efi: add 'offset' param to efi_low_alloc()   Ard Biesheuvel
• [RFC] arm64: defconfig: enable 48-bit VA by default   Ard Biesheuvel
• [RFC] arm64: defconfig: enable 48-bit VA by default   Ard Biesheuvel
• [RFC] arm64: defconfig: enable 48-bit VA by default   Ard Biesheuvel
• [RFC] arm64: defconfig: enable 48-bit VA by default   Ard Biesheuvel
• [PATCH] amba: Support clk parents and rates assigned in DT   Bintian
• [PATCH] amba: Support clk parents and rates assigned in DT   Bintian
• [PATCHv2 0/3] regmap: Use different lockdep class for each regmap init call   Nicolas Boichat
• [PATCHv2 1/3] mfd: vexpress: Add parentheses around bridge->ops->regmap_init call   Nicolas Boichat
• [PATCHv2 2/3] thermal: sti: Add parentheses around bridge->ops->regmap_init call   Nicolas Boichat
• [PATCHv2 3/3] regmap: Use different lockdep class for each regmap init call   Nicolas Boichat
• [PATCHv2 0/3] regmap: Use different lockdep class for each regmap init call   Nicolas Boichat
• [PATCH 1/7] pinctrl: UniPhier: add UniPhier pinctrl core support   Paul Bolle
• [PATCH 1/7] pinctrl: UniPhier: add UniPhier pinctrl core support   Paul Bolle
• [PATCH 3/7] dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support   Paul Bolle
• [PATCH 4/7] dmaengine: st_fdma: Add xbar support   Paul Bolle
• [PATCH 1/7] pinctrl: UniPhier: add UniPhier pinctrl core support   Paul Bolle
• [PATCH v2] coresight: replicator: Use module_platform_driver   Paul Bolle
• [PATCH v2] coresight: replicator: Use module_platform_driver   Paul Bolle
• [PATCH v7 1/4] drm/layerscape: Add Freescale DCU DRM driver   Paul Bolle
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Paul Bolle
• [PATCH 5/5] PCI: Add host drivers for Cavium ThunderX processors.   Paul Bolle
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Paul Bolle
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Paul Bolle
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Paul Bolle
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Paul Bolle
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Paul Bolle
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Paul Bolle
• [PATCH 7/7] mtd: atmel-quadspi: add driver for Atmel QSPI controller   Paul Bolle
• [PATCH v2 3/6] mailbox: Add support for ST's Mailbox IP   Paul Bolle
• [PATCH 3/6] pci:host: Add Altera PCIe host controller driver   Paul Bolle
• [PATCH 2/4] ASoc: rockchip: Add rockchip SPDIF transceiver driver   Paul Bolle
• [PATCH v2 3/6] mailbox: Add support for ST's Mailbox IP   Paul Bolle
• [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control   Paolo Bonzini
• [RFC 13/17] KVM: introduce kvm_arch functions for IRQ bypass   Paolo Bonzini
• [RFC 16/17] KVM: eventfd: add irq bypass consumer management   Paolo Bonzini
• [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control   Paolo Bonzini
• [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control   Paolo Bonzini
• [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control   Paolo Bonzini
• [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control   Paolo Bonzini
• [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control   Paolo Bonzini
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Paolo Bonzini
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Paolo Bonzini
• [RFC v2 1/6] KVM: arm/arm64: select IRQ_BYPASS_MANAGER   Paolo Bonzini
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Paolo Bonzini
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Paolo Bonzini
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Paolo Bonzini
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Paolo Bonzini
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Paolo Bonzini
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Paolo Bonzini
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Paolo Bonzini
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Paolo Bonzini
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Paolo Bonzini
• [PATCH 07/13] arm64: KVM: VHE: Patch out use of HVC   Paolo Bonzini
• [PATCH] KVM: Add Kconfig option to signal cross-endian guests   Paolo Bonzini
• [RFC v2 0/6] IRQ bypass manager and irqfd consumer   Paolo Bonzini
• [PATCH 07/13] arm64: KVM: VHE: Patch out use of HVC   Paolo Bonzini
• Extensions for KVM MSI related ioctls   Paolo Bonzini
• [PATCH v2 3/7] KVM: irqchip: convey devid to kvm_set_msi   Paolo Bonzini
• [PATCH] ASoC: fsl-ssi: Fix bitclock calculation for master mode   Juergen Borleis
• [PATCH] serial: mxs-auart: keep the AUART unit in reset state when not in use   Juergen Borleis
• [PATCH] serial: mxs-auart: keep the AUART unit in reset state when not in use   Juergen Borleis
• [PATCH v2] serial: mxs-auart: keep the AUART unit in reset state when not in use   Juergen Borleis
• [PATCH v3] serial: mxs-auart: keep the AUART unit in reset state when not in use   Juergen Borleis
• [PATCH v2] serial: mxs-auart: keep the AUART unit in reset state when not in use   Juergen Borleis
• [PATCH v3] serial: mxs-auart: keep the AUART unit in reset state when not in use   Juergen Borleis
• [PATCH v3] serial: mxs-auart: keep the AUART unit in reset state when not in use   Juergen Borleis
• [PATCH 2/6] mmc: sdhci-esdhc-imx: add tuning-step seting support   Chen Bough
• [PATCH 2/5] Documentation: Detail permitted DT properties for the imx6ul_tsc   Chen Bough
• [PATCH 5/5] ARM: dts: imx6ul-14x14-evk.dts: add tsc support   Chen Bough
• [PATCH 1/5] input: touchscreen: add imx6ul_tsc driver support   Chen Bough
• [PATCH] gpio: msm: Remove empty msm_gpio_{request,free}()   Stephen Boyd
• [PATCH 1/4] hvc_dcc: bind driver to core0 for reads and writes   Stephen Boyd
• [PATCH 2/4] hvc_dcc: don't ignore errors during initialization   Stephen Boyd
• [PATCH 4/4] hvc_dcc: disable user-space access to DCC   Stephen Boyd
• [PATCH v2 0/3] ARM: keystone: add ecc error interrupt handling   Stephen Boyd
• [PATCH v5 1/3] clk: samsung: exynos3250: Add cpu clock configuration data and instaniate cpu clock   Stephen Boyd
• [PATCH 03/10] OPP: Allocate dev_opp from _add_device_opp()   Stephen Boyd
• [PATCH 05/10] opp: Add support to parse "operating-points-v2" bindings   Stephen Boyd
• [PATCH 01/10] opp: Relocate few routines   Stephen Boyd
• [PATCH 02/10] OPP: Create _remove_device_opp() for freeing dev_opp   Stephen Boyd
• [PATCH 06/10] OPP: Add clock-latency-ns support   Stephen Boyd
• [PATCH 05/10] opp: Add support to parse "operating-points-v2" bindings   Stephen Boyd
• [PATCH 0/2] iProc clock driver fixes   Stephen Boyd
• [PATCH 8/9] drivers: clk: st: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x   Stephen Boyd
• [PATCH 3/9] drivers: clk: st: Remove unused code   Stephen Boyd
• [PATCH 4/9] drivers: clk: st: Fix FSYN channel values   Stephen Boyd
• [PATCH 5/9] drivers: clk: st: Fix flexgen lock init   Stephen Boyd
• [PATCH 6/9] drivers: clk: st: Add CLK_GET_RATE_NOCACHE flag to clocks   Stephen Boyd
• [PATCH 7/9] drivers: clk: st: Fix mux bit-setting for Cortex A9 clocks   Stephen Boyd
• [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor)   Stephen Boyd
• [PATCH v2 5/9] clk: rockchip: add support for phase inverters   Stephen Boyd
• [PATCH v2 8/9] clk: rockchip: add dt-binding header for rk3368   Stephen Boyd
• [PATCH v2 1/9] clk: rockchip: rk3288: add CLK_SET_RATE_PARENT to sclk_mac   Stephen Boyd
• [PATCH v2 2/9] clk: rockchip: fix faulty vip parent name on rk3288   Stephen Boyd
• [PATCH v2 3/9] clk: rockchip: protect register macros against multipart values   Stephen Boyd
• [PATCH v2 4/9] clk: rockchip: add COMPOSITE_NOGATE_DIVTBL variant   Stephen Boyd
• [PATCH v2 1/4] clk: mediatek: mt8173: Fix enabling of critical clocks   Stephen Boyd
• [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock controllers   Stephen Boyd
• [PATCH 03/10] OPP: Allocate dev_opp from _add_device_opp()   Stephen Boyd
• [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor)   Stephen Boyd
• [PATCH v4] clk: change clk_ops' ->determine_rate() prototype   Stephen Boyd
• [PATCH 1/9] drivers: clk: st: Incorrect clocks status   Stephen Boyd
• [PATCH 1/7] clk: rockchip: add support for phase inverters   Stephen Boyd
• [PATCH 1/7] clk: rockchip: add support for phase inverters   Stephen Boyd
• [PATCH 2/7] clk: rockchip: fix issues in the mmc-phase clock   Stephen Boyd
• [PATCH 3/7] clk: rockchip: define the inverters of rk3066/rk3188 and rk3288   Stephen Boyd
• [PATCH 4/7] dt-bindings: add documentation of rk3668 clock controller   Stephen Boyd
• [PATCH 5/7] clk: rockchip: add dt-binding header for rk3368   Stephen Boyd
• [PATCH 6/7] clk: rockchip: add missing include guards   Stephen Boyd
• [PATCH 6/7] clk: rockchip: add missing include guards   Stephen Boyd
• [PATCH 7/7] clk: rockchip: add rk3368 clock controller   Stephen Boyd
• [PATCH 03/10] OPP: Allocate dev_opp from _add_device_opp()   Stephen Boyd
• [PATCH v2 1/4] clk: mediatek: mt8173: Fix enabling of critical clocks   Stephen Boyd
• [PATCH] amba: Support clk parents and rates assigned in DT   Stephen Boyd
• [PATCH 1/9] drivers: clk: st: Incorrect clocks status   Stephen Boyd
• [PATCH] Input: pmic8xxx-pwrkey - Support shutdown   Stephen Boyd
• [PATCH] pinctrl: qcom: Hook pm_power_down for shutdown support   Stephen Boyd
• [PATCH v5] clk: change clk_ops' ->determine_rate() prototype   Stephen Boyd
• [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor)   Stephen Boyd
• [PATCH v5] clk: change clk_ops' ->determine_rate() prototype   Stephen Boyd
• [PATCH 0/2] Add MT8173 MMPLL change rate support   Stephen Boyd
• [PATCH v2 2/2] clk: mediatek: Add MT8173 MMPLL change rate support   Stephen Boyd
• Build error with !CONFIG_SMP in v4.2-rc1 on arm multi_v7_defconfig   Stephen Boyd
• [PATCH] drivers: qcom: Select QCOM_SCM unconditionally for QCOM_PM   Stephen Boyd
• [PATCH 0/7] Remove clk.h from clk-provider.h (ARM part)   Stephen Boyd
• [PATCH 1/7] ARM: at91: Remove clk-provider.h include   Stephen Boyd
• [PATCH 2/7] ARM: hisi: Remove clk-provider.h include   Stephen Boyd
• [PATCH 3/7] ARM: keystone: Remove clk-provider.h include   Stephen Boyd
• [PATCH 4/7] ARM: mvebu: Remove clk-provider.h include   Stephen Boyd
• [PATCH 5/7] ARM: orion5x: Remove clk-provider.h include   Stephen Boyd
• [PATCH 6/7] ARM: s3c64xx: Remove clk-provider.h include   Stephen Boyd
• [PATCH 7/7] ARM: OMAP2+: Include clk.h   Stephen Boyd
• [PATCH] arm64: Remove clk-provider.h include   Stephen Boyd
• [PATCHv3 00/27] ARM: OMAP2+: clock code move under clk driver   Stephen Boyd
• [PATCH v5] clk: change clk_ops' ->determine_rate() prototype   Stephen Boyd
• [PATCH] Input: pmic8xxx-pwrkey - Support shutdown   Stephen Boyd
• [PATCH v2] Input: pmic8xxx-pwrkey - Support shutdown   Stephen Boyd
• [PATCH v2] Input: pmic8xxx-pwrkey - Support shutdown   Stephen Boyd
• [PATCH 4/5] clk: mediatek: add 13mhz clock for MT8173   Stephen Boyd
• [PATCH 2/5] clocksource: mediatek: Use GPT as sched clock source   Stephen Boyd
• [PATCH v2] Input: pmic8xxx-pwrkey - Support shutdown   Stephen Boyd
• [PATCH v2] Input: pmic8xxx-pwrkey - Support shutdown   Stephen Boyd
• [PATCH v3] Input: pmic8xxx-pwrkey - Support shutdown   Stephen Boyd
• [PATCH v7 6/9] nvmem: qfprom: Add Qualcomm QFPROM support.   Stephen Boyd
• [PATCH v7 5/9] Documentation: nvmem: add nvmem api level and how-to doc   Stephen Boyd
• [PATCH v7 3/9] nvmem: Add nvmem_device based consumer apis.   Stephen Boyd
• [PATCH 0/2] Add MT8173 MMPLL change rate support   Stephen Boyd
• [PATCH 1/3] drivers: clk: st: Support for enable/disable in Clockgen PLLs   Stephen Boyd
• [PATCH 05/12] ARM: OMAP2+: Add support for initializing dm814x clocks   Stephen Boyd
• [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor)   Stephen Boyd
• [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor)   Stephen Boyd
• [PATCH 08/10] OPP: Add support for opp-suspend   Stephen Boyd
• [PATCH v5] ARM: smp: Only expose /sys/.../cpuX/online if hotpluggable   Stephen Boyd
• [PATCH v4 0/2] SPMI regulator driver updates   Stephen Boyd
• [PATCH v4 1/2] regulator: Add over current protection (OCP) support   Stephen Boyd
• [PATCH v4 2/2] regulator: qcom-spmi: Add vendor specific configuration   Stephen Boyd
• [PATCH 07/10] opp: Add OPP sharing information to OPP library   Stephen Boyd
• [PATCH v3 1/3] clk: mediatek: Fix PLL registers setting flow   Stephen Boyd
• [PATCH v3 2/3] clk: mediatek: Fix calculation of PLL rate settings   Stephen Boyd
• [PATCH v3 3/3] clk: mediatek: Add MT8173 MMPLL change rate support   Stephen Boyd
• [PATCH 07/10] opp: Add OPP sharing information to OPP library   Stephen Boyd
• [PATCH v8 1/9] nvmem: Add a simple NVMEM framework for nvmem providers   Stephen Boyd
• [PATCH v8 6/9] nvmem: qfprom: Add Qualcomm QFPROM support.   Stephen Boyd
• [PATCH v8 1/9] nvmem: Add a simple NVMEM framework for nvmem providers   Stephen Boyd
• [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor)   Stephen Boyd
• [RFC PATCH 4/4] iommu/arm-smmu: Add support for specifying regulators   Stephen Boyd
• [PATCH 3/4] clk: 88pm800: Add clk provider driver for 88pm800 family of devices   Stephen Boyd
• [PATCH 3/4] clk: 88pm800: Add clk provider driver for 88pm800 family of devices   Stephen Boyd
• [PATCH] clk: rockchip: Fix PLL bandwidth   Stephen Boyd
• [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC   Stephen Boyd
• [PATCH] clk: rockchip: Fix PLL bandwidth   Stephen Boyd
• [PATCH 3/4] clk: 88pm800: Add clk provider driver for 88pm800 family of devices   Stephen Boyd
• [PATCH v6 01/13] clk: qcom: Add support for GDSCs   Stephen Boyd
• [PATCH v6 02/13] clk: qcom: gdsc: Prepare common clk probe to register gdscs   Stephen Boyd
• [PATCH v6 03/13] clk: qcom: gdsc: Use PM clocks to control gdsc clocks   Stephen Boyd
• [PATCH v6 04/13] clk: qcom: gdsc: Manage clocks with !CONFIG_PM   Stephen Boyd
• [PATCH v6 08/13] clk: qcom: gdsc: Add GDSCs in msm8916 GCC   Stephen Boyd
• [PATCH v6 09/13] clk: qcom: gdsc: Add GDSCs in msm8974 GCC   Stephen Boyd
• [PATCH v6 10/13] clk: qcom: gdsc: Add GDSCs in msm8974 MMCC   Stephen Boyd
• [PATCH v6 07/13] clk: qcom: gdsc: Add support for ON only state   Stephen Boyd
• [PATCH v6 01/13] clk: qcom: Add support for GDSCs   Stephen Boyd
• [PATCH] clk: s2mps11: Use kcalloc instead of kzalloc for array allocation   Stephen Boyd
• [PATCH 7/7] clk: sunxi: Add a simple gates driver   Stephen Boyd
• [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC   Stephen Boyd
• [PATCH 2/7] clk: atlas7: export mux clks so that driver can use it   Stephen Boyd
• [PATCH 5/7] clk: atlas7: fix the clock tree for bluetooth stuff   Stephen Boyd
• [PATCH v4 2/2] dt: power: st: Provide bindings for ST's OPPs   Stephen Boyd
• [PATCH 05/10] opp: Add support to parse "operating-points-v2" bindings   Stephen Boyd
• [PATCH v6 04/13] clk: qcom: gdsc: Manage clocks with !CONFIG_PM   Stephen Boyd
• [PATCH v4 2/2] dt: power: st: Provide bindings for ST's OPPs   Stephen Boyd
• [PATCH v1 7/7] ARM: dts: ifc6410: add inforce LVDS panel support   Stephen Boyd
• [PATCH v1 1/7] ARM: dts: ifc6410: Add pwrseq support for WLAN   Stephen Boyd
• [PATCH v6 04/13] clk: qcom: gdsc: Manage clocks with !CONFIG_PM   Stephen Boyd
• [PATCH v5 06/10] clk: mediatek: mt8173: Fix enabling of critical clocks   Stephen Boyd
• [PATCH v5 01/10] clk: mediatek: Removed unused dpi_ck clock from MT8173   Stephen Boyd
• [PATCH v5 01/10] clk: mediatek: Removed unused dpi_ck clock from MT8173   Stephen Boyd
• [PATCH 2/4] mfd: devicetree: bindings: Add clock subdevice node information   Stephen Boyd
• [PATCH V3 06/16] PM / OPP: Break _opp_add_dynamic() into smaller functions   Stephen Boyd
• [PATCH V3 07/16] PM / OPP: Add support to parse "operating-points-v2" bindings   Stephen Boyd
• [PATCH V3 11/16] PM / OPP: Add helpers for initializing CPU OPPs   Stephen Boyd
• [PATCH V3 12/16] PM / OPP: add dev_pm_opp_is_turbo() helper   Stephen Boyd
• [PATCH V3 13/16] cpufreq: Update boost flag while initializing freq table from OPPs   Stephen Boyd
• [PATCH V3 14/16] cpufreq: Allow drivers to enable boost support after registering driver   Stephen Boyd
• [PATCH V3 15/16] cpufreq: dt: Add support for operating-points-v2 bindings   Stephen Boyd
• [PATCH V3 16/16] cpufreq: dt: Add support for turbo/boost mode   Stephen Boyd
• [PATCH V3 07/16] PM / OPP: Add support to parse "operating-points-v2" bindings   Stephen Boyd
• [PATCH V3 10/16] PM / OPP: Add support for opp-suspend   Stephen Boyd
• [PATCH v4 2/2] dt: power: st: Provide bindings for ST's OPPs   Stephen Boyd
• [PATCH 23/23] clk: at91: Revert "keep slow clk enabled to prevent system hang"   Stephen Boyd
• [PATCH 23/23] clk: at91: Revert "keep slow clk enabled to prevent system hang"   Stephen Boyd
• [PATCH 23/23] clk: at91: Revert "keep slow clk enabled to prevent system hang"   Stephen Boyd
• [PATCH 0/3] Move clk-sp810 to assigned clock parents   Stephen Boyd
• [PATCH 1/3] clk: versatile: Switch to assigned clock parents   Stephen Boyd
• [PATCH 2/3] ARM: dts: vexpress: Use assigned-clock-parents for sp810   Stephen Boyd
• [PATCH 3/3] ARM64: dts: vexpress: Use assigned-clock-parents for sp810   Stephen Boyd
• [Xen-devel] [PATCH 4/8] xen: Use the correctly the Xen memory terminologies   Chris (Christopher) Brand
• [PATCH 0/2] ARM: xip: Get XIP for ARMv7 working again   Chris Brandt
• [PATCH 1/2] ARM: xip: Can't use text area as stack   Chris Brandt
• [PATCH 2/2] ARM: xip: Use correct symbol for end of ROM marker   Chris Brandt
• [PATCH 2/2] ARM: xip: Use correct symbol for end of ROM marker   Chris Brandt
• [PATCHv6 1/2] dts: Adding docs for Xilinx LogiCORE IP mailbox driver.   Jassi Brar
• [PATCH 3/6] mailbox: Add support for ST's Mailbox IP   Jassi Brar
• [PATCH 3/6] mailbox: Add support for ST's Mailbox IP   Jassi Brar
• [PATCH 3/6] mailbox: Add support for ST's Mailbox IP   Jassi Brar
• [PATCH 3/6] mailbox: Add support for ST's Mailbox IP   Jassi Brar
• [PATCH 3/6] mailbox: Add support for ST's Mailbox IP   Jassi Brar
• [PATCH 3/6] mailbox: Add support for ST's Mailbox IP   Jassi Brar
• [RFC PATCH 00/15] pwm: add support for atomic update   Boris Brezillon
• [RFC PATCH 01/15] pwm: add the pwm_is_enabled() helper   Boris Brezillon
• [RFC PATCH 02/15] pwm: fix pwm_get_period and pwm_get_duty_cycle prototypes   Boris Brezillon
• [RFC PATCH 03/15] pwm: add pwm_get_polarity helper function   Boris Brezillon
• [RFC PATCH 04/15] pwm: make use of pwm_get_xxx helpers where appropriate   Boris Brezillon
• [RFC PATCH 05/15] pwm: introduce default period and polarity concepts   Boris Brezillon
• [RFC PATCH 06/15] pwm: define a new pwm_state struct   Boris Brezillon
• [RFC PATCH 07/15] pwm: move the enabled/disabled info to pwm_state struct   Boris Brezillon
• [RFC PATCH 08/15] backlight: pwm_bl: remove useless call to pwm_set_period   Boris Brezillon
• [RFC PATCH 09/15] pwm: declare a default PWM state   Boris Brezillon
• [RFC PATCH 10/15] pwm: add the PWM initial state retrieval infra   Boris Brezillon
• [RFC PATCH 11/15] pwm: add the core infrastructure to allow atomic update   Boris Brezillon
• [RFC PATCH 12/15] pwm: rockchip: add initial state retrieval   Boris Brezillon
• [RFC PATCH 13/15] pwm: rockchip: add support for atomic update   Boris Brezillon
• [RFC PATCH 14/15] regulator: pwm: implement ->enable(), ->disable() and ->is_enabled methods   Boris Brezillon
• [RFC PATCH 15/15] regulator: pwm: properly initialize the ->state field   Boris Brezillon
• [RFC PATCH 14/15] regulator: pwm: implement ->enable(), ->disable() and ->is_enabled methods   Boris Brezillon
• [RFC PATCH 14/15] regulator: pwm: implement ->enable(), ->disable() and ->is_enabled methods   Boris Brezillon
• [RFC PATCH 00/15] pwm: add support for atomic update   Boris Brezillon
• [RFC PATCH 13/15] pwm: rockchip: add support for atomic update   Boris Brezillon
• [RFC PATCH 12/15] pwm: rockchip: add initial state retrieval   Boris Brezillon
• [RFC PATCH 05/15] pwm: introduce default period and polarity concepts   Boris Brezillon
• [RFC PATCH 00/15] pwm: add support for atomic update   Boris Brezillon
• [RFC PATCH 16/15] pwm: add informations about polarity, duty cycle and period to debugfs   Boris Brezillon
• crypto: marvell/CESA: Issues with non cache-line aligned buffers   Boris Brezillon
• crypto: marvell/CESA: Issues with non cache-line aligned buffers   Boris Brezillon
• crypto: marvell/CESA: Issues with non cache-line aligned buffers   Boris Brezillon
• [PATCH v4] clk: change clk_ops' ->determine_rate() prototype   Boris Brezillon
• [PATCH v3] clk: change clk_ops' ->determine_rate() prototype   Boris Brezillon
• [PATCH v4] clk: change clk_ops' ->determine_rate() prototype   Boris Brezillon
• [PATCH v2] mfd: atmel-hlcdc: implement write synchronization   Boris Brezillon
• [PATCH v3] mfd: atmel-hlcdc: implement config synchronization   Boris Brezillon
• [PATCH v5] clk: change clk_ops' ->determine_rate() prototype   Boris Brezillon
• [PATCH v5] clk: change clk_ops' ->determine_rate() prototype   Boris Brezillon
• [PATCH v2 0/9] regulator: pwm-regulator: Introduce continuous-mode   Boris Brezillon
• [PATCH v2 6/9] regulator: pwm-regulator: Re-write bindings   Boris Brezillon
• [PATCH v2 0/9] regulator: pwm-regulator: Introduce continuous-mode   Boris Brezillon
• [PATCH v5] clk: change clk_ops' ->determine_rate() prototype   Boris Brezillon
• [PATCH v5] clk: change clk_ops' ->determine_rate() prototype   Boris Brezillon
• [RFC PATCH 14/15] regulator: pwm: implement ->enable(), ->disable() and ->is_enabled methods   Boris Brezillon
• [RFC PATCH 15/15] regulator: pwm: properly initialize the ->state field   Boris Brezillon
• [RFC PATCH 14/15] regulator: pwm: implement ->enable(), ->disable() and ->is_enabled methods   Boris Brezillon
• [RFC PATCH 00/15] pwm: add support for atomic update   Boris Brezillon
• [RFC PATCH 05/15] pwm: introduce default period and polarity concepts   Boris Brezillon
• [RFC PATCH 08/15] backlight: pwm_bl: remove useless call to pwm_set_period   Boris Brezillon
• [RFC PATCH 05/15] pwm: introduce default period and polarity concepts   Boris Brezillon
• [RFC PATCH 08/15] backlight: pwm_bl: remove useless call to pwm_set_period   Boris Brezillon
• [RFC PATCH 10/15] pwm: add the PWM initial state retrieval infra   Boris Brezillon
• [RFC PATCH 11/15] pwm: add the core infrastructure to allow atomic update   Boris Brezillon
• [RFC PATCH 08/15] backlight: pwm_bl: remove useless call to pwm_set_period   Boris Brezillon
• [RFC PATCH 06/15] pwm: define a new pwm_state struct   Boris Brezillon
• [RFC PATCH 06/15] pwm: define a new pwm_state struct   Boris Brezillon
• [PATCH v2 00/10] pwm: add support for atomic update   Boris Brezillon
• [PATCH v2 01/10] pwm: introduce default period and polarity concepts   Boris Brezillon
• [PATCH v2 02/10] pwm: define a new pwm_state struct   Boris Brezillon
• [PATCH v2 03/10] pwm: move the enabled/disabled info to pwm_state struct   Boris Brezillon
• [PATCH v2 04/10] backlight: pwm_bl: remove useless call to pwm_set_period   Boris Brezillon
• [PATCH v2 05/10] pwm: declare a default PWM state   Boris Brezillon
• [PATCH v2 06/10] pwm: add the PWM initial state retrieval infra   Boris Brezillon
• [PATCH v2 07/10] pwm: add the core infrastructure to allow atomic update   Boris Brezillon
• [PATCH v2 08/10] pwm: add information about polarity, duty cycle and period to debugfs   Boris Brezillon
• [PATCH v2 09/10] pwm: rockchip: add initial state retrieval   Boris Brezillon
• [PATCH v2 10/10] pwm: rockchip: add support for atomic update   Boris Brezillon
• [PATCH v2 00/10] pwm: add support for atomic update   Boris Brezillon
• [PATCH v2 00/10] pwm: add support for atomic update   Boris Brezillon
• [PATCH v6 2/2] mfd: atmel-flexcom: add a driver for Atmel Flexible Serial Communication Unit   Boris Brezillon
• [PATCH v6 2/2] mfd: atmel-flexcom: add a driver for Atmel Flexible Serial Communication Unit   Boris Brezillon
• [PATCH v7 1/2] mfd: devicetree: add bindings for Atmel Flexcom   Boris Brezillon
• [PATCH v2 00/10] pwm: add support for atomic update   Boris Brezillon
• [PATCH] clk: at91: add PMC sama5d2 support   Boris Brezillon
• [PATCH v3] clk: at91: add generated clock driver   Boris Brezillon
• [PATCH v4] clk: at91: add generated clock driver   Boris Brezillon
• [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data   Boris Brezillon
• [PATCH 1/5] rtc: at91sam9: properly handle error case   Boris Brezillon
• [RFC PATCH 0/6] mtd: nand: per-partition ECC config   Boris Brezillon
• [RFC PATCH 1/6] mtd: allow device-specific partition handling   Boris Brezillon
• [RFC PATCH 2/6] mtd: part: pass OF node to the MTD partition layer   Boris Brezillon
• [RFC PATCH 3/6] mtd: nand: move nand_ecc_ctrl initialization out of nand_scan_tail   Boris Brezillon
• [RFC PATCH 4/6] mtd: nand: add an helper to access the ecc controller struct   Boris Brezillon
• [RFC PATCH 5/6] mtd: nand: add infrastructure for per-partition ECC config   Boris Brezillon
• [RFC PATCH 6/6] mtd: nand: sunxi: support per-partition ECC config   Boris Brezillon
• [PATCH v5] clk: at91: add generated clock driver   Boris Brezillon
• [PATCH 00/23] ARM: at91: Properly handle slow clock   Boris Brezillon
• [PATCH 0/3] drm: atmel-hlcdc: add support for several SoCs   Boris Brezillon
• [PATCH 1/3] drm: atmel-hlcdc: add support for at91sam9x5 SoCs   Boris Brezillon
• [PATCH 2/3] drm: atmel-hlcdc: add support for at91sam9n12 SoC   Boris Brezillon
• [PATCH 3/3] drm: atmel-hlcdc: add support for sama5d4 SoCs   Boris Brezillon
• [PATCH] drm: atmel-hlcdc: add PRIME support   Boris Brezillon
• [PATCH] drm: atmel-hlcdc: add the missing DRM_ATOMIC flag   Boris Brezillon
• [PATCH] drm: atmel-hlcdc: add RGB565 and RGB444 output support   Boris Brezillon
• [PATCH] mfd: atmel-hlcdc: Add support for new SoCs   Boris Brezillon
• [PATCH] ARM: at91: pwm: atmel-hlcdc: add at91sam9n12 entry for the errata   Boris Brezillon
• [PATCHv6 1/2] dts: Adding docs for Xilinx LogiCORE IP mailbox driver.   Sören Brinkmann
• [RFT PATCH] net: axienet: Fix devm_ioremap_resource return value check   Sören Brinkmann
• [PATCHv7 1/2] dts: Adding docs for Xilinx LogiCORE IP mailbox driver.   Sören Brinkmann
• [RFC 1/3] docs: dts: Added documentation for Xilinx Zynq PL Reset bindings.   Sören Brinkmann
• [RFC 3/3] reset: reset-zynq-pl: Adding support for Xilinx Zynq PL reset.   Sören Brinkmann
• [RFCv2 1/3] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.   Sören Brinkmann
• [RFCv2 3/3] reset: reset-zynq: Adding support for Xilinx Zynq reset controller.   Sören Brinkmann
• [RFCv2 1/3] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.   Sören Brinkmann
• [RFCv2 1/3] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.   Sören Brinkmann
• [RFCv3 4/4] ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER   Sören Brinkmann
• [RESEND 00/10] regulator: pwm-regulator: Introduce continuous-mode   Mark Brown
• [RESEND 00/10] regulator: pwm-regulator: Introduce continuous-mode   Mark Brown
• [RESEND 08/10] regulator: pwm-regulator: Add support for continuous-voltage   Mark Brown
• [RESEND 09/10] regulator: pwm-regulator: Simplify voltage to duty-cycle call   Mark Brown
• [RESEND 06/10] dt: regulator: pwm-regulator: Re-write bindings   Mark Brown
• [RESEND 09/10] regulator: pwm-regulator: Simplify voltage to duty-cycle call   Mark Brown
• [RESEND 08/10] regulator: pwm-regulator: Add support for continuous-voltage   Mark Brown
• [PATCH 1/3] regulator: 88pm800: Add 88pm860 regulator support   Mark Brown
• [PATCH 2/3] regulator: 88pm800: fix LDO vsel_mask value   Mark Brown
• [PATCH 3/3] regulator: 88pm800: Add dev_info to show probe success status   Mark Brown
• [PATCH 3/3] regulator: 88pm800: Add dev_info to show probe success status   Mark Brown
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller   Mark Brown
• [RFC PATCH 14/15] regulator: pwm: implement ->enable(), ->disable() and ->is_enabled methods   Mark Brown
• [RFC PATCH 15/15] regulator: pwm: properly initialize the ->state field   Mark Brown
• [RFC PATCH 14/15] regulator: pwm: implement ->enable(), ->disable() and ->is_enabled methods   Mark Brown
• [PATCH] spi: imx: fix ecspi mode setup   Mark Brown
• [RFC PATCH 1/2] spi: zynqmp: gqspi: add support for dual parallel mode configuration   Mark Brown
• [RFC PATCH 2/2] spi: zynqmp: gqspi: add support for stacked mode configuration   Mark Brown
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller   Mark Brown
• [PATCH 1/2] ASoC: Drop owner assignment from i2c_driver   Mark Brown
• [PATCH v2 2/2] ASoC: Drop owner assignment from platform_driver   Mark Brown
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller   Mark Brown
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller   Mark Brown
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Mark Brown
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Mark Brown
• next-20150716 build: 4 failures 88 warnings (next-20150716)   Mark Brown
• [PATCH] mm: Fix up new locking syscalls   Mark Brown
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Mark Brown
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Mark Brown
• [PATCH 5/5] regulator: 88pm800: Add support for configuration of dual phase on BUCK1   Mark Brown
• [PATCH 4/5] regulator: 88pm800: Add 88pm860 regulator support   Mark Brown
• [PATCH 4/5] regulator: 88pm800: Add 88pm860 regulator support   Mark Brown
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Mark Brown
• [PATCH 2/2] ASoC: rockchip: Add machine driver for rt5645/rt5650 codec   Mark Brown
• [PATCH v2 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Mark Brown
• [PATCH] coresight: Fix implicit inclusion of linux/sched.h   Mark Brown
• next-20150720 build: 1 failures 21 warnings (next-20150720)   Mark Brown
• [PATCH] regmap: Add function check before called format_val   Mark Brown
• [PATCH v2 00/10] pwm: add support for atomic update   Mark Brown
• [PATCH 1/2] dt-bindings: Add document for MT6311 regulator   Mark Brown
• [PATCH 2/2] regulator: MT6311: Add support for MT6311 regulator   Mark Brown
• [PATCH v2 00/10] pwm: add support for atomic update   Mark Brown
• [PATCH] regmap: Add function check before called format_val   Mark Brown
• [PATCH] regmap: Add function check before called format_val   Mark Brown
• next-20150722 build: 2 failures 75 warnings (next-20150722)   Mark Brown
• [PATCHv2 0/3] regmap: Use different lockdep class for each regmap init call   Mark Brown
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller   Mark Brown
• [PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O   Mark Brown
• [PATCH v3 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus   Mark Brown
• [PATCH v3 3/4] spi: mediatek: Add spi bus for Mediatek MT8173   Mark Brown
• [PATCH v2 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property   Mark Brown
• [PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O   Mark Brown
• [PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O   Mark Brown
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller   Mark Brown
• [PATCH v2 2/2] spi: s3c64xx: add more debug prints.   Mark Brown
• next-20150729 build: 2 failures 49 warnings (next-20150729)   Mark Brown
• [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data   Mark Brown
• [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data   Mark Brown
• [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data   Mark Brown
• [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data   Mark Brown
• [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data   Mark Brown
• [RFC PATCH 1/5] spi: introduce flag for memory mapped read   Mark Brown
• [RFC PATCH 4/5] ARM: dts: DRA7: Add memory map region entries for qspi   Mark Brown
• [PATCH 2/2] ARM: dts: mediatek: add mt6580 basic support   Matthias Brugger
• [PATCH v2 4/9] clocksource: mediatek: Use GPT as sched clock source   Matthias Brugger
• [PATCH] dts: mt8173-evb: Add da9211 to i2c1   Matthias Brugger
• [PATCH v2 2/2] ARM: dts: mediatek: add 6580 support   Matthias Brugger
• [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus   Matthias Brugger
• [PATCH] arm64: dts: mt8173-evb: Add PMIC support   Matthias Brugger
• [PATCH] arm64: dts: mt8173: Add afe device node   Matthias Brugger
• [PATCH] arm64: dts: mt8173-evb: Add PMIC support   Matthias Brugger
• [PATCH v4 0/3] clk: Add regmap support for clk mulitplexer   Matthias Brugger
• [PATCH v2 2/6] soc: Mediatek: Add SCPSYS CPU power domain driver   Matthias Brugger
• [PATCH] soc: mediatek: Drop owner assignment from platform_driver   Matthias Brugger
• [PATCH v3 5/5] arm64: dts: mt8173: Add subsystem clock controller device nodes   Matthias Brugger
• Mediatek MT8135 dts updates   Matthias Brugger
• [PATCH] ARM: mediatek: Add regmap to mediatek Kconfig   Matthias Brugger
• [PATCH v2] arm64: dts: mt8173: Add afe device node   Matthias Brugger
• [PATCH 2/5] clocksource: mediatek: Use GPT as sched clock source   Matthias Brugger
• [PATCH 3/5] arm64: mediatek: enable MTK_TIMER   Matthias Brugger
• [PATCH 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT when setup   Matthias Brugger
• [RESEND PATCH 1/6] Document: bindings: DT: Add SMP enable method for MT6580 SoC platform   Matthias Brugger
• [PATCH] arm64: dts: mediatek: Add MT8173 MMC dts   Matthias Brugger
• [PATCH 3/5] arm64: mediatek: enable MTK_TIMER   Matthias Brugger
• [PATCH v2 1/2] watchdog: add wdt suspend/resume support   Matthias Brugger
• [PATCH v2 2/2] watchdog: add wdt shutdown callback to disable wdt if enabled   Matthias Brugger
• [PATCH] ARM: mediatek: Add regmap to mediatek Kconfig   Matthias Brugger
• [PATCH v6 1/3] dt-bindings: pwm: add MediaTek display PWM bindings   Matthias Brugger
• [PATCH v6 0/3] Add MediaTek display PWM driver   Matthias Brugger
• [PATCH] serial: 8250_uniphier: call clk_disable_unprepare() on failure path   Matthias Brugger
• [PATCH v6 1/3] dt-bindings: pwm: add MediaTek display PWM bindings   Matthias Brugger
• [RESEND PATCH 0/6] This series adds SMP support for the MediaTek MT6580.   Matthias Brugger
• [PATCH v4 7/7] arm64: dts: mt8173: Add subsystem clock controller device nodes   Matthias Brugger
• [RESEND PATCH 2/6] soc: Mediatek: Add SCPSYS CPU power domain driver   Matthias Brugger
• [GIT PULL] ARM: mediatek: arm64 updates for v4.2   Matthias Brugger
• [PULL REQUEST] ARM: mediatek: dts updates for v4.3   Matthias Brugger
• [PULL REQUEST] ARM: mediatek: soc updates for v4.3   Matthias Brugger
• [GIT PULL] ARM: mediatek: arm64 updates for v4.3   Matthias Brugger
• [GIT PULL] ARM: mediatek: arm64 updates for v4.2   Matthias Brugger
• [PATCH] soc: mediatek: Fix SCPSYS compilation   Matthias Brugger
• [PATCH] soc: mediatek: Fix SCPSYS compilation   Matthias Brugger
• [PATCH v4 RESEND 0/3] clk: Add regmap support for basic clocks   Matthias Brugger
• [PATCH v4 RESEND 1/3] clk: Add regmap support   Matthias Brugger
• [PATCH v4 RESEND 2/3] clk: mediatek: Add support for clk-mux using regmap   Matthias Brugger
• [PATCH v4 RESEND 3/3] clk: mediatek: Use regmap clk-mux for mt8135   Matthias Brugger
• [PATCH] lib: Make _find_next_bit helper function inline   Cassidy Burden
• [PATCH] lib: Make _find_next_bit helper function inline   Cassidy Burden
• [PATCH v3 1/2] PCI: generic: remove dependency on hw_pci   Jayachandran C
• [PATCH v3 2/2] PCI: generic: add arm64 support   Jayachandran C
• [PATCH v2 2/2] ARM: pci: kill pcibios_msi_controller   Jayachandran C.
• [PATCH v2 2/2] ARM: pci: kill pcibios_msi_controller   Jayachandran C.
• [PATCH v3 1/2] PCI: generic: remove dependency on hw_pci   Jayachandran C.
• [PATCH v3 1/2] PCI: generic: remove dependency on hw_pci   Jayachandran C.
• MUSB dual-role on AM335x behaving weirdly   Gregory CLEMENT
• [PATCH] clk: mvebu: update cpu clock frequency   Gregory CLEMENT
• [PATCH] clk: mvebu: update cpu clock frequency   Gregory CLEMENT
• [PATCH RFC 0/5] cpufreq support for Marvell Armada 38x   Gregory CLEMENT
• [PATCH RFC 1/5] clk: mvebu: Add Armada 38x support for clk-cpu   Gregory CLEMENT
• [PATCH RFC 2/5] ARM: mvebu: Use shorter register definition in pmsu.c   Gregory CLEMENT
• [PATCH RFC 3/5] ARM: mvebu: Made the dynamic frequency scaling support more generic   Gregory CLEMENT
• [PATCH RFC 4/5] ARM: mvebu: Armada 38x: Add dynamic frequency scaling support in pmsu   Gregory CLEMENT
• [PATCH RFC 5/5] ARM: mvebu: Update Armada 38x DT for dynamic frequency scaling   Gregory CLEMENT
• [PATCH v2 3/4] ARM: mvebu: Allow using the GIC for wakeup in standby mode   Gregory CLEMENT
• [PATCH v2 4/4] ARM: mvebu: Warn about the wake-up sources not taken into account in suspend   Gregory CLEMENT
• [PATCH v2 2/4] ARM: mvebu: Add standby support   Gregory CLEMENT
• [PATCH v3 0/4] Add standby support for the recent mvebu SoCs   Gregory CLEMENT
• [PATCH v3 1/4] ARM: mvebu: Use __init for the PM initialization functions   Gregory CLEMENT
• [PATCH v3 2/4] ARM: mvebu: Add standby support   Gregory CLEMENT
• [PATCH v3 3/4] ARM: mvebu: Allow using the GIC for wakeup in standby mode   Gregory CLEMENT
• [PATCH v3 4/4] ARM: mvebu: Warn about the wake-up sources not taken into account in suspend   Gregory CLEMENT
• [PATCH v2 2/4] ARM: mvebu: Add standby support   Gregory CLEMENT
• [PATCH v2 1/2] ARM: dts: add buffalo linkstation ls-wxl/wsxl   Gregory CLEMENT
• [PATCH v2 2/2] ARM: dts: add buffalo linkstation ls-wvl/vl   Gregory CLEMENT
• [PATCH 1/3] ARM: mvebu: fix description of pwr-sata0 regulator on Armada 388 GP   Gregory CLEMENT
• [PATCH 2/3] ARM: mvebu: update EEPROM description of Armada 388 GP   Gregory CLEMENT
• [PATCH 3/3] ARM: mvebu: update mvebu_v7_defconfig with features needed for Armada 388 GP   Gregory CLEMENT
• [GIT PULL] ARM: mvebu: cleanup changes for v4.3   Gregory CLEMENT
• [GIT PULL] ARM: mvebu: dt changes for v4.3   Gregory CLEMENT
• [GIT PULL] ARM: mvebu: config changes for v4.3   Gregory CLEMENT
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Gregory CLEMENT
• [PATCH v2] ARM: dts: Convert Linkstation Mini to Device Tree   Gregory CLEMENT
• [PATCH v2 1/2] ARM: dts: orion5x: add buffalo linkstation ls-wtgl   Gregory CLEMENT
• [PATCH v2 2/2] ARM: defconfig: orion5x: add DT support   Gregory CLEMENT
• [PATCH v2 2/4] ARM: Kirkwood: add modes-map property to ns2-leds nodes   Gregory CLEMENT
• [PATCH v7 00/14] crypto: add a new driver for Marvell's CESA   Gregory CLEMENT
• [PATCH v2 0/3] Add DT support for netxbig LEDs   Gregory CLEMENT
• [PATCHv2 0/8] ARM: mvebu: add suspend to RAM support for Armada 38x   Gregory CLEMENT
• [PATCH v2 0/4] Add standby support for the recent mvebu SoCs   Gregory CLEMENT
• [PATCH v3 3/4] ARM: mvebu: Allow using the GIC for wakeup in standby mode   Gregory CLEMENT
• [PATCH v2 3/4] ARM: mvebu: Allow using the GIC for wakeup in standby mode   Gregory CLEMENT
• linux-next: build failure after merge of the tip tree   Gregory CLEMENT
• [PATCH v3] irqchip: kill off set_irq_flags usage   Gregory CLEMENT
• [PATCH v2 0/3] Add DT support for netxbig LEDs   Gregory CLEMENT
• [PATCH v2 2/4] ARM: Kirkwood: add modes-map property to ns2-leds nodes   Gregory CLEMENT
• [GIT PULL] ARM: mvebu: soc changes for v4.3   Gregory CLEMENT
• [GIT PULL] ARM: mvebu: dt changes for v4.3 #2   Gregory CLEMENT
• [GIT PULL] ARM: mvebu: config changes for v4.3 #2   Gregory CLEMENT
• [PATCH 0/7] Another posting of the Dove PMU series   Gregory CLEMENT
• [PATCH] ARM: orion5x: fix legacy orion5x IRQ numbers   Benjamin Cama
• [PATCH v2] ARM: dts: Convert Linkstation Mini to Device Tree   Benjamin Cama
• [PATCH v2] ARM: dts: Convert Linkstation Mini to Device Tree   Benjamin Cama
• [PATCH v2 1/2] iio: adc: Determine sampling frequencies by using minimum sample time   Jonathan Cameron
• [PATCH v2 2/2] ARM: dts: vfxxx: Add property for minimum sample time   Jonathan Cameron
• [PATCH v2 2/2] ARM: dts: vfxxx: Add property for minimum sample time   Jonathan Cameron
• [PATCH v3 2/2] ARM: dts: vf-colibri: Add property for minimum sample time   Jonathan Cameron
• [PATCH v3 1/2] iio: adc: vf610: Determine sampling frequencies by using minimum sample time   Jonathan Cameron
• [PATCH] [TWL4030 MADC] Fix ADC[3:6] readings   Jonathan Cameron
• [PATCH 3/3] arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG   Ian Campbell
• [PATCH 3/3] arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG   Ian Campbell
• [PATCH] dtb: Create a common home for cross-architecture dtsi files.   Ian Campbell
• [PATCH] dtb: Create a common home for cross-architecture dtsi files.   Ian Campbell
• [Xen-devel] [PATCH v2 01/20] xen: Add Xen specific page definition   Ian Campbell
• [PATCH] dtb: Create a common home for cross-architecture dtsi files.   Ian Campbell
• [PATCH v2] dtb: Create a common home for cross-architecture dtsi files.   Ian Campbell
• [PATCH v2] dtb: Create a common home for cross-architecture dtsi files.   Ian Campbell
• [PATCH v2] dtb: Create a common home for cross-architecture dtsi files.   Ian Campbell
• [PATCH 1/8] arm/xen: Remove helpers which are PV specific   Ian Campbell
• [PATCH v3] dtb: Create a common home for cross-architecture dtsi files.   Ian Campbell
• [PATCH] arm: Update memblock limit after mapping lowmem   Javier Martinez Canillas
• [PATCH] ARM: mm: handle non-pmd-aligned end of RAM   Javier Martinez Canillas
• [PATCH v3 1/4] clk: samsung: exynos5250: add cpu clock configuration data and instantiate cpu clock   Javier Martinez Canillas
• [PATCH v3 2/4] ARM: dts: Exynos5250: add CPU OPP and regulator supply property   Javier Martinez Canillas
• [PATCH v3 3/4] ARM: Exynos: switch to using generic cpufreq driver for Exynos5250   Javier Martinez Canillas
• [PATCH v3 4/4] cpufreq: exynos: remove Exynos5250 specific cpufreq driver support   Javier Martinez Canillas
• [PATCH 0/4] ARM: dts: Use labels instead of full paths for Exynos5 pinctrl nodes   Javier Martinez Canillas
• [PATCH 1/4] ARM: dts: Include exynos5250-pinctrl after the nodes were defined   Javier Martinez Canillas
• [PATCH 2/4] ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths   Javier Martinez Canillas
• [PATCH 3/4] ARM: dts: Include exynos5420-pinctrl after the nodes were defined   Javier Martinez Canillas
• [PATCH 4/4] ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths   Javier Martinez Canillas
• [PATCH 2/4] ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths   Javier Martinez Canillas
• [PATCH 0/4] ARM: dts: Use labels instead of full paths for Exynos5 pinctrl nodes   Javier Martinez Canillas
• [PATCH] ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs   Javier Martinez Canillas
• [PATCH v2 4/7] clk: samsung: exynos4x12: add cpu clock configuration data and instantiate cpu clock   Javier Martinez Canillas
• [PATCH] PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding   Javier Martinez Canillas
• [PATCH 0/3] mfd: Improve DT binding docs for max77686 and max77802   Javier Martinez Canillas
• [PATCH 1/3] mfd: max77686: Don't suggest in binding to use a deprecated property   Javier Martinez Canillas
• [PATCH 2/3] mfd: Add DT binding for Maxim MAX77802 IC   Javier Martinez Canillas
• [PATCH 3/3] mfd: max77686: Split out regulator part from the DT binding   Javier Martinez Canillas
• [PATCH 2/3] mfd: Add DT binding for Maxim MAX77802 IC   Javier Martinez Canillas
• [PATCH 3/3] mfd: max77686: Split out regulator part from the DT binding   Javier Martinez Canillas
• [PATCH] serial: samsung: Remove redundant DEBUG_LL check   Javier Martinez Canillas
• [PATCH 2/3] mfd: Add DT binding for Maxim MAX77802 IC   Javier Martinez Canillas
• [RFC] ARM: EXYNOS: reset KFC cores when cpu is up   Javier Martinez Canillas
• [PATCH 0/3] ARM: Enable NTC Thermistors and max77802 regulator drivers   Javier Martinez Canillas
• [PATCH 1/3] ARM: multi_v7_defconfig: Enable max77802 regulator   Javier Martinez Canillas
• [PATCH 2/3] ARM: multi_v7_defconfig: Enable NTC Thermistors support   Javier Martinez Canillas
• [PATCH 3/3] ARM: exynos_defconfig: Enable NTC Thermistors support   Javier Martinez Canillas
• [PATCH] ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs   Javier Martinez Canillas
• [PATCH 1/3] ARM: multi_v7_defconfig: Enable max77802 regulator   Javier Martinez Canillas
• [PATCH v2 0/3] ARM: Enable NTC Thermistors and max77802 regulator drivers   Javier Martinez Canillas
• [PATCH v2 1/3] ARM: multi_v7_defconfig: Enable max77802 regulator   Javier Martinez Canillas
• [PATCH v2 2/3] ARM: multi_v7_defconfig: Enable NTC Thermistors support   Javier Martinez Canillas
• [PATCH v2 3/3] ARM: exynos_defconfig: Enable NTC Thermistors support   Javier Martinez Canillas
• [PATCH v2 0/4] mfd: Improve DT binding docs for max77686 and max77802   Javier Martinez Canillas
• [PATCH v2 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property   Javier Martinez Canillas
• [PATCH v2 2/4] mfd: max77686: Use a generic name for the PMIC node in the example   Javier Martinez Canillas
• [PATCH v2 3/4] mfd: Add DT binding for Maxim MAX77802 IC   Javier Martinez Canillas
• [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding   Javier Martinez Canillas
• [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding   Javier Martinez Canillas
• [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding   Javier Martinez Canillas
• [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding   Javier Martinez Canillas
• [PATCH 0/2] MAINTAINERS: update max77686 entry and add one for max77802   Javier Martinez Canillas
• [PATCH 1/2] MAINTAINERS: add Device Tree binding doc for max77686 regulator   Javier Martinez Canillas
• [PATCH 2/2] MAINTAINERS: add an entry for the Maxim MAX77802 PMIC drivers   Javier Martinez Canillas
• [PATCH v2 2/4] mfd: max77686: Use a generic name for the PMIC node in the example   Javier Martinez Canillas
• [PATCH v2 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property   Javier Martinez Canillas
• [PATCH v2 2/2] regulator: mt6311: Add support for mt6311 regulator   Javier Martinez Canillas
• [PATCH] PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding   Javier Martinez Canillas
• [PATCH v3 1/2] dt-bindings: regulator: mt6311: Add document for mt6311 regulator   Javier Martinez Canillas
• [PATCH v3 2/2] regulator: mt6311: Add support for mt6311 regulator   Javier Martinez Canillas
• [PATCH v3 2/2] regulator: mt6311: Add support for mt6311 regulator   Javier Martinez Canillas
• [PATCH v2 3/4] mfd: Add DT binding for Maxim MAX77802 IC   Javier Martinez Canillas
• [PATCH v4 1/2] dt-bindings: regulator: mt6311: Add document for mt6311 regulator   Javier Martinez Canillas
• [PATCH v4 2/2] regulator: mt6311: Add support for mt6311 regulator   Javier Martinez Canillas
• [PATCH v4 1/2] dt-bindings: regulator: mt6311: Add document for mt6311 regulator   Javier Martinez Canillas
• [PATCH v2 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property   Javier Martinez Canillas
• [PATCH v2 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property   Javier Martinez Canillas
• [PATCH v2] ARM: dts: Add SPI CS on exynos5250-snow   Javier Martinez Canillas
• [PATCH v3 0/4] mfd: Improve DT binding docs for max77686 and max77802   Javier Martinez Canillas
• [PATCH v3 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property   Javier Martinez Canillas
• [PATCH v3 2/4] mfd: max77686: Use a generic name for the PMIC node in the example   Javier Martinez Canillas
• [PATCH v3 3/4] mfd: Add DT binding for Maxim MAX77802 IC   Javier Martinez Canillas
• [PATCH v3 4/4] mfd: max77686: Split out regulator part from the DT binding   Javier Martinez Canillas
• [PATCH] PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding   Javier Martinez Canillas
• Regular oops on shutdown of KVM/ARM64 machines with VGA device   Steve Capper
• [PATCH] arm64: Don't report clear pmds and puds as huge   Steve Capper
• [PATCH] arm64: Don't report clear pmds and puds as huge   Steve Capper
• [RFC PATCH] arm64: cpuinfo: Expose MIDR_EL1 and REVIDR_EL1 to sysfs   Steve Capper
• [PATCH] ARM: dts: i.MX35: Fix can support   Denis Carikli
• [PATCH v2] ARM: dts: i.MX35: Fix can support.   Denis Carikli
• [PATCH 1/5] usb: gadget: ffs: call functionfs_unbind() if _ffs_func_bind() fails   Dan Carpenter
• [PATCH 3/5] usb: isp1760: udc: add missing usb_ep_set_maxpacket_limit()   Dan Carpenter
• [PATCH 4/5] staging: emxx_udc: add missing usb_ep_set_maxpacket_limit()   Dan Carpenter
• [PATCH 1/5] usb: gadget: ffs: call functionfs_unbind() if _ffs_func_bind() fails   Dan Carpenter
• [PATCH V3 2/5] mm: mlock: Add new mlock, munlock, and munlockall system calls   Heiko Carstens
• [PATCH v3 1/2] rtc: add rtc-lpc24xx driver   Josh Cartwright
• [PATCH] GICv3: Add ITS entry to THUNDER dts   Chalamarla, Tirumalesh
• [PATCH] arm64: KVM: Enable minimalistic support for Thunder   Chalamarla, Tirumalesh
• [PATCH] arm64/kvm: Add generic v8 KVM target   Chalamarla, Tirumalesh
• [PATCH 2/3] Docs: dt: Add PCI MSI map bindings   Chalamarla, Tirumalesh
• [PATCH 2/3] ARM: dts: configure regulators for Gumstix Pepper   Ash Charles
• [PATCH V2] arm:DTS Correct audio input route & set mic bias   Ash Charles
• [PATCH 02/12] [media] dvb-pll: Add support for THOMSON DTT7546X tuner.   Mauro Carvalho Chehab
• [PATCH 07/12] [media] tsin: c8sectpfe: STiH407/10 Linux DVB demux support   Mauro Carvalho Chehab
• [PATCH 09/12] [media] tsin: c8sectpfe: Add support for various ST NIM cards.   Mauro Carvalho Chehab
• [PATCH 11/12] [media] tsin: c8sectpfe: Add Kconfig and Makefile for the driver.   Mauro Carvalho Chehab
• [PATCH 02/12] [media] dvb-pll: Add support for THOMSON DTT7546X tuner.   Mauro Carvalho Chehab
• [PATCH 0/5] Add imx6ul touch screen controller support   Haibo Chen
• [PATCH 1/5] input: touchscreen: add imx6ul_tsc driver support   Haibo Chen
• [PATCH 2/5] Documentation: Detail permitted DT properties for the imx6ul_tsc   Haibo Chen
• [PATCH 3/5] ARM: imx_v6_v7_defconfig: enable imx6ul_tsc   Haibo Chen
• [PATCH 4/5] ARM: dts: imx6ul.dtsi: add TSC support   Haibo Chen
• [PATCH 5/5] ARM: dts: imx6ul-14x14-evk.dts: add tsc support   Haibo Chen
• [PATCH v2 0/5] Add imx6ul touch screen controller support   Haibo Chen
• [PATCH v2 1/5] input: touchscreen: add imx6ul_tsc driver support   Haibo Chen
• [PATCH v2 2/5] Documentation: Detail permitted DT properties for the imx6ul_tsc   Haibo Chen
• [PATCH v2 3/5] ARM: imx_v6_v7_defconfig: enable imx6ul_tsc   Haibo Chen
• [PATCH v2 4/5] ARM: dts: imx6ul.dtsi: add TSC support   Haibo Chen
• [PATCH v2 5/5] ARM: dts: imx6ul-14x14-evk.dts: add tsc support   Haibo Chen
• [PATCH v3 0/6] mmc: imx: a few fixes and new feature   Haibo Chen
• [PATCH v3 1/6] mmc: sdhci-esdhc-imx: add imx7d support and support HS400   Haibo Chen
• [PATCH v3 2/6] mmc: sdhci-esdhc-imx: add tuning-step seting support   Haibo Chen
• [PATCH v3 3/6] ARM: dts: imx7d-sdb: add eMMC5.0 support   Haibo Chen
• [PATCH v3 4/6] mmc: sdhci-esdhc-imx: add compatible string in bingding doc   Haibo Chen
• [PATCH v3 5/6] mmc: sdhci-esdhc-imx: config watermark level and burst length   Haibo Chen
• [PATCH v3 6/6] mmc: sdhci-esdhc-imx: set back the burst_length_enable bit to 1   Haibo Chen
• [PATCH] dts: mt8173-oak: Add da9211 to i2c1   Henry Chen
• [PATCH] dts: mt8173-evb: Add da9211 to i2c1   Henry Chen
• regulator: MT6311: Add support for MT6311 regulator   Henry Chen
• [PATCH 1/2] dt-bindings: Add document for MT6311 regulator   Henry Chen
• [PATCH 2/2] regulator: MT6311: Add support for MT6311 regulator   Henry Chen
• [PATCH] regmap: Add function check before called format_val   Henry Chen
• [PATCH] regmap: Add function check before called format_val   Henry Chen
• [PATCH 1/2] dt-bindings: Add document for MT6311 regulator   Henry Chen
• [PATCH 2/2] regulator: MT6311: Add support for MT6311 regulator   Henry Chen
• [PATCH v2] regulator: mt6311: Add support for MT6311 regulator   Henry Chen
• [PATCH v2 1/2] dt-bindings: regulator: mt6311: Add document for   Henry Chen
• [PATCH v2 2/2] regulator: mt6311: Add support for mt6311 regulator   Henry Chen
• [PATCH] regmap: Add function check before called format_val   Henry Chen
• [PATCH v2 2/2] regulator: mt6311: Add support for mt6311 regulator   Henry Chen
• [PATCH v3] regulator: mt6311: Add support for MT6311 regulator   Henry Chen
• [PATCH v3 1/2] dt-bindings: regulator: mt6311: Add document for mt6311 regulator   Henry Chen
• [PATCH v3 2/2] regulator: mt6311: Add support for mt6311 regulator   Henry Chen
• [PATCH v3 2/2] regulator: mt6311: Add support for mt6311 regulator   Henry Chen
• [PATCH v3 1/2] dt-bindings: regulator: mt6311: Add document for mt6311 regulator   Henry Chen
• [PATCH v4] regulator: mt6311: Add support for MT6311 regulator   Henry Chen
• [PATCH v4 1/2] dt-bindings: regulator: mt6311: Add document for mt6311 regulator   Henry Chen
• [PATCH v4 2/2] regulator: mt6311: Add support for mt6311 regulator   Henry Chen
• [PATCH v4 1/2] dt-bindings: regulator: mt6311: Add document for mt6311 regulator   Henry Chen
• [PATCH] rtc: mt6397: implement suspend/resume function in rtc-mt6397 driver   Henry Chen
• [PATCH] mfd: mt6397: Implement wake handler and suspend/resume for mt6397-core.c   Henry Chen
• [PATCH] ASoC: dpcm: Add checks of playback/capture before dpcm_get_be   Koro Chen
• [PATCH] arm64: dts: mt8173: Add afe device node   Koro Chen
• [PATCH] arm64: dts: mt8173: Add afe device node   Koro Chen
• [PATCH] ASoC: mediatek: Use platform_of_node for machine drivers   Koro Chen
• [PATCH v2] arm64: dts: mt8173: Add afe device node   Koro Chen
• [PATCH 2/2] ASoC: Drop owner assignment from platform_driver   Koro Chen
• [PATCH v2] arm64: dts: mt8173: Add afe device node   Koro Chen
• [PATCH] ASoC: mediatek: Add suspend/resume callbacks   Koro Chen
• [alsa-devel] [PATCH] ASoC: fsl-ssi: Fix bitclock calculation for master mode   Nicolin Chen
• [PATCH 00/10] USB: chipidea misc patches   Peter Chen
• [PATCH 01/10] usb: chipidea: udc: zero-length packet is only needed for TX   Peter Chen
• [PATCH 02/10] usb: chipidea: define stream mode disable for both roles   Peter Chen
• [PATCH 03/10] usb: chipidea: imx: add stream mode enable for device mode at imx6sl/imx6sx   Peter Chen
• [PATCH 04/10] Doc: usb: ci-hdrc-usb2: add ahb-burst-config for binding doc   Peter Chen
• [PATCH 05/10] ARM: imx6: set ahb-burst-config as 0 for USB   Peter Chen
• [PATCH 06/10] usb: chipidea: add ahb burst configuration interface   Peter Chen
• [PATCH 07/10] usb: chipidea: usbmisc_imx: add unburst setting for imx6   Peter Chen
• [PATCH 08/10] Doc: usb: ci-hdrc-usb2: add tx(rx)-burst-config-dword for binding doc   Peter Chen
• [PATCH 09/10] ARM: imx6: change default burst size for USB   Peter Chen
• [PATCH 10/10] usb: chipidea: add tx/rx burst size configuration interface   Peter Chen
• [PATCH 02/10] usb: chipidea: define stream mode disable for both roles   Peter Chen
• [PATCH 02/10] usb: chipidea: define stream mode disable for both roles   Peter Chen
• [PATCH 07/10] usb: chipidea: usbmisc_imx: add unburst setting for imx6   Peter Chen
• [PATCH 07/10] usb: chipidea: usbmisc_imx: add unburst setting for imx6   Peter Chen
• [PATCH v5 2/2] cpufreq: mediatek: Add MT8173 cpufreq driver   Pi-Cheng Chen
• [PATCH v3] clk: mediatek: Export CPU mux clocks for CPU frequency control   Pi-Cheng Chen
• [PATCH] thermal: cpu_cooling: Iterate over all CPUs in clip_cpu mask to get frequency table   Pi-Cheng Chen
• [PATCH v5 2/2] cpufreq: mediatek: Add MT8173 cpufreq driver   Pi-Cheng Chen
• [PATCH v6 0/4] Add Mediatek MT8173 cpufreq driver   Pi-Cheng Chen
• [PATCH v6 1/4] dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings   Pi-Cheng Chen
• [PATCH v6 2/4] dt-bindings: mediatek: Add MT8173 cpufreq driver bindings   Pi-Cheng Chen
• [PATCH v6 3/4] cpufreq: mediatek: Add MT8173 cpufreq driver   Pi-Cheng Chen
• [PATCH v6 4/4] arm64: dts: mt8173: Add mt8173 cpufreq driver support   Pi-Cheng Chen
• [PATCH v4] clk: mediatek: Export CPU mux clocks for CPU frequency control   Pi-Cheng Chen
• [PATCH] clk: mediatek: Export CPU mux clocks for CPU frequency control   Pi-Cheng Chen
• [PATCH v2 4/9] clocksource: mediatek: Use GPT as sched clock source   Yingjoe Chen
• [RESEND PATCH 1/6] Document: bindings: DT: Add SMP enable method for MT6580 SoC platform   Yingjoe Chen
• [PATCH 0/5] add GPT timer support for mt8173   Yingjoe Chen
• [PATCH 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT when setup   Yingjoe Chen
• [PATCH 2/5] clocksource: mediatek: Use GPT as sched clock source   Yingjoe Chen
• [PATCH 3/5] arm64: mediatek: enable MTK_TIMER   Yingjoe Chen
• [PATCH 4/5] clk: mediatek: add 13mhz clock for MT8173   Yingjoe Chen
• [PATCH 5/5] arm64: dts: mt8173: add timer node   Yingjoe Chen
• [PATCH v3 0/5] Add SMP bringup support for mt65xx socs   Yingjoe Chen
• [PATCH v3 1/5] ARM: mediatek: enable gpt6 on boot up to make arch timer working   Yingjoe Chen
• [PATCH v3 2/5] devicetree: bindings: add new SMP enable method Mediatek SoC   Yingjoe Chen
• [PATCH v3 3/5] ARM: mediatek: add smp bringup code   Yingjoe Chen
• [PATCH v3 4/5] ARM: dts: mt8135: enable basic SMP bringup for mt8135   Yingjoe Chen
• [PATCH v3 5/5] ARM: dts: mt8127: enable basic SMP bringup for mt8127   Yingjoe Chen
• [PATCH v3 4/5] ARM: dts: mt8135: enable basic SMP bringup for mt8135   Yingjoe Chen
• [PATCH v2 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173   Yingjoe Chen
• [PATCH v2 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT when setup   Yingjoe Chen
• [PATCH 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT when setup   Yingjoe Chen
• [PATCH v2 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT when setup   Yingjoe Chen
• [PATCH 2/2] ARM: dts: mediatek: add mt6580 basic support   Mars Cheng
• [PATCH v2 2/2] ARM: dts: mediatek: add 6580 support   Mars Cheng
• [PATCH v5 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250   Chanwoo Choi
• [PATCH v5 1/3] clk: samsung: exynos3250: Add cpu clock configuration data and instaniate cpu clock   Chanwoo Choi
• [PATCH v5 2/3] ARM: dts: Add CPU OPP and regulator supply property for Exynos3250   Chanwoo Choi
• [PATCH v5 3/3] ARM: exynos: Add exynos3250 compatible to use generic cpufreq driver   Chanwoo Choi
• [PATCH v5 2/3] ARM: dts: Add CPU OPP and regulator supply property for Exynos3250   Chanwoo Choi
• [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250   Chanwoo Choi
• [PATCH v6 1/3] clk: samsung: exynos3250: Add cpu clock configuration data and instaniate cpu clock   Chanwoo Choi
• [PATCH v6 2/3] ARM: dts: Add CPU OPP and regulator supply property for Exynos3250   Chanwoo Choi
• [PATCH v6 3/3] ARM: exynos: Add exynos3250 compatible to use generic cpufreq driver   Chanwoo Choi
• [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board   Chanwoo Choi
• [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board   Chanwoo Choi
• [PATCH v6 1/3] clk: samsung: exynos3250: Add cpu clock configuration data and instaniate cpu clock   Chanwoo Choi
• [PATCH] PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding   Chanwoo Choi
• [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250   Chanwoo Choi
• [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board   Chanwoo Choi
• [PATCH] phy: Drop owner assignment from platform_driver   Patrice Chotard
• [PATCH v1 4/7] ARM: dts: apq8064: Add MDP support   Rob Clark
• [PATCH v1 7/7] ARM: dts: ifc6410: add inforce LVDS panel support   Rob Clark
• [PATCH] dts: ls1021a: Add dts nodes for eTSEC0, eTSEC1 and eTSEC2   Manoil Claudiu
• [PATCH] dts: ls1021a: Add dts nodes for eTSEC0, eTSEC1 and eTSEC2   Manoil Claudiu
• [PATCH v2] dts: ls1021a: Add dts nodes for eTSEC0, eTSEC1 and eTSEC2   Manoil Claudiu
• [PATCH v2] dts: ls1021a: Add dts nodes for eTSEC0, eTSEC1 and eTSEC2   Manoil Claudiu
• [PATCH v3] iio: adc: xilinx-xadc: Push interrupts into threaded context   Lars-Peter Clausen
• [PATCH] mmc: sdhci-of-arasan: Get quirks from device tree   Lars-Peter Clausen
• [PATCH 0/2] gpio: dwapb: allow sane gpio numbering   Richard Cochran
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Richard Cochran
• [PATCH 2/2] arm: dts: socfpga: Provide the gpio numbers in the controller nodes.   Richard Cochran
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Richard Cochran
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Richard Cochran
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Richard Cochran
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Richard Cochran
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Richard Cochran
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Richard Cochran
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Richard Cochran
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Richard Cochran
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Richard Cochran
• [PATCH 1/2] arm64: Blacklist non-kprobe-able symbols   William Cohen
• [Xen-devel] [PATCH 0/8] Use correctly the Xen memory terminologies in Linux   Andrew Cooper
• [PATCH v3 3/3] ARM: dts: stm32f429: Adopt STM32F4 clock driver   Maxime Coquelin
• [PATCH] ARM: dts: Add STM32429i-EVAL board support   Maxime Coquelin
• [PATCH 2/2] drm: sti: adapt DT to fix probe/bind issues in DRM driver   Maxime Coquelin
• [PATCH 0/9] Add STiH407 fanmily pinctrl DT for tsin, tsout and mtsin channels   Maxime Coquelin
• [PATCH v2 2/3] ARM: STi: DT: STiH407: Add cpu-release-addr dt property.   Maxime Coquelin
• [PATCH v2 3/3] ARM: STi: DT: STiH418: Add cpu-release-addr dt property.   Maxime Coquelin
• [PATCH v2 1/3] ARM: STi: Add code to release secondary cores from holding pen.   Maxime Coquelin
• [PATCH] ARM: STi: Remove platform call to trace_hardirqs_off()   Maxime Coquelin
• [PATCH 9/9] ARM: STi: DT: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x   Maxime Coquelin
• [PATCH] ARM: DT: STiH410: Add bdisp dt nodes   Maxime Coquelin
• [PATCH] ARM: dts: Add STM32429i-EVAL board support   Maxime Coquelin
• [GIT PULL] STM32 DT changes for v4.3   Maxime Coquelin
• [GIT PULL] STi defconfig updates for v4.3, round 1   Maxime Coquelin
• [GIT PULL] STi DT changes for v4.3, round 1   Maxime Coquelin
• [GIT PULL]STi SoC changes for v4.3, round 1   Maxime Coquelin
• [PATCH] ARM: dts: Use stdout-path in STM32F429 Discovery board   Maxime Coquelin
• [PATCH] ARM: dts: Add STM32429i-EVAL board support   Maxime Coquelin
• [GIT PULL] STM32 DT changes for v4.3 v2   Maxime Coquelin
• [GIT PULL] STM32 DT changes for v4.3   Maxime Coquelin
• [PATCH] Documentation: ARM: EXYNOS: Extend boot loader interface documentation   Jonathan Corbet
• [PATCH v10] crypto: Add Allwinner Security System crypto accelerator   LABBE Corentin
• [PATCH v10 1/5] ARM: sun4i: dt: Add Security System to A10 SoC DTS   LABBE Corentin
• [PATCH v10 2/5] ARM: sun7i: dt: Add Security System to A20 SoC DTS   LABBE Corentin
• [PATCH v10 3/5] ARM: sun4i: dt: Add DT bindings documentation for SUN4I Security System   LABBE Corentin
• [PATCH v10 4/5] crypto: Add Allwinner Security System crypto accelerator   LABBE Corentin
• [PATCH v10 5/5] MAINTAINERS: Add myself as maintainer of Allwinner Security System   LABBE Corentin
• [linux-sunxi] Re: [PATCH v10 4/5] crypto: Add Allwinner Security System crypto accelerator   LABBE Corentin
• [PATCH v11] crypto: Add Allwinner Security System crypto accelerator   LABBE Corentin
• [PATCH v11 1/5] ARM: sun4i: dt: Add Security System to A10 SoC DTS   LABBE Corentin
• [PATCH v11 2/5] ARM: sun7i: dt: Add Security System to A20 SoC DTS   LABBE Corentin
• [PATCH v11 3/5] ARM: sun4i: dt: Add DT bindings documentation for SUN4I Security System   LABBE Corentin
• [PATCH v11 4/5] crypto: Add Allwinner Security System crypto accelerator   LABBE Corentin
• [PATCH v11 5/5] MAINTAINERS: Add myself as maintainer of Allwinner Security System   LABBE Corentin
• [PATCH 0/4] ARM: tegra: enable Nouveau for Jetson TK1 and Venice 2   Alexandre Courbot
• [PATCH 1/4] ARM: tegra: Add IOMMU node to GK20A   Alexandre Courbot
• [PATCH 2/4] ARM: tegra: venice2: Add GK20A GPU DT node   Alexandre Courbot
• [PATCH 3/4] ARM: tegra: jetson-tk1: Add GK20A GPU DT node   Alexandre Courbot
• [PATCH 4/4] ARM: tegra: Enable Nouveau in defconfig   Alexandre Courbot
• [PATCH] ARM: tegra: roth: Add MMC pwrseq to power wifi on   Alexandre Courbot
• [PATCH 04/13] pinctrl: tegra: Only set the gpio range if needed   Alexandre Courbot
• [PATCH 0/9] gpiolib: Add GPIO name support   Alexandre Courbot
• [PATCH v2 4/5] xhci: mediatek: support MTK xHCI host controller   John Crispin
• [RFC] backlight: pwm: Handle EPROBE_DEFER while requesting the PWM   Petr Cvek
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Petr Cvek
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Petr Cvek
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Petr Cvek
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Petr Cvek
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Petr Cvek
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Petr Cvek
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Petr Cvek
• [PATCH v2 0/2] Add support for NXP LPC18xx Watchdog timer   Ariel D'Alessandro
• [PATCH v2 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Ariel D'Alessandro
• [PATCH v2 2/2] DT: watchdog: Add NXP LPC18xx Watchdog Timer binding documentation   Ariel D'Alessandro
• [PATCH v2 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Ariel D'Alessandro
• [PATCH v2 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Ariel D'Alessandro
• [PATCH v3 0/2] Add support for NXP LPC18xx Watchdog timer   Ariel D'Alessandro
• [PATCH v3 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Ariel D'Alessandro
• [PATCH v3 2/2] DT: watchdog: Add NXP LPC18xx Watchdog Timer binding documentation   Ariel D'Alessandro
• [PATCH v3 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Ariel D'Alessandro
• [PATCH v3 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Ariel D'Alessandro
• [PATCH v3 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Ariel D'Alessandro
• [PATCH v3 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Ariel D'Alessandro
• [PATCH v3 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Ariel D'Alessandro
• [PATCH 0/2] Add support for NXP LPC18xx PWM/SCT   Ariel D'Alessandro
• [PATCH 1/2] pwm: NXP LPC18xx PWM/SCT driver   Ariel D'Alessandro
• [PATCH 2/2] DT: pwm: Add NXP LPC18xx PWM/SCT binding documentation   Ariel D'Alessandro
• [PATCH v4 0/2] Add support for NXP LPC18xx Watchdog timer   Ariel D'Alessandro
• [PATCH v4 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Ariel D'Alessandro
• [PATCH v4 2/2] DT: watchdog: Add NXP LPC18xx Watchdog Timer binding documentation   Ariel D'Alessandro
• [PATCH 2/2] DT: pwm: Add NXP LPC18xx PWM/SCT binding documentation   Ariel D'Alessandro
• [PATCH 10/10] KVM: arm/arm64: vgic: Allow non-shared device HW interrupts   Christoffer Dall
• [PATCH v3 01/11] KVM: arm: plug guest debug exploit   Christoffer Dall
• [PATCH v3 04/11] KVM: arm: common infrastructure for handling AArch32 CP14/CP15   Christoffer Dall
• [PATCH v3 0/2] arm/arm64: KVM: Optimize arm64 fp/simd, saves 30-50% on exits   Christoffer Dall
• [PATCH 06/10] KVM: arm/arm64: vgic: Allow dynamic mapping of physical/virtual interrupts   Christoffer Dall
• [PATCH 05/10] KVM: arm/arm64: vgic: Relax vgic_can_sample_irq for edge IRQs   Christoffer Dall
• Regular oops on shutdown of KVM/ARM64 machines with VGA device   Christoffer Dall
• [PATCH] arm64: Don't report clear pmds and puds as huge   Christoffer Dall
• [PATCH] arm64: Don't report clear pmds and puds as huge   Christoffer Dall
• [PATCH v3 1/2] arm64: KVM: Optimize arm64 skip 30-50% vfp/simd save/restore on exits   Christoffer Dall
• [PATCH v3 2/2] arm: KVM: keep arm vfp/simd exit handling consistent with arm64   Christoffer Dall
• [PATCH 05/10] KVM: arm/arm64: vgic: Relax vgic_can_sample_irq for edge IRQs   Christoffer Dall
• [PATCH v7 08/11] KVM: arm64: introduce vcpu->arch.debug_ptr   Christoffer Dall
• [PATCH v3 0/2] arm/arm64: KVM: Optimize arm64 fp/simd, saves 30-50% on exits   Christoffer Dall
• [PATCH v3 1/2] arm64: KVM: Optimize arm64 skip 30-50% vfp/simd save/restore on exits   Christoffer Dall
• [PATCH v3 08/11] KVM: arm: implement dirty bit mechanism for debug registers   Christoffer Dall
• [PATCH 11/13] KVM: arm64: implement ITS command queue command handlers   Christoffer Dall
• [PATCH v3 09/11] KVM: arm: implement lazy world switch for debug registers   Christoffer Dall
• [PATCH v7 08/11] KVM: arm64: introduce vcpu->arch.debug_ptr   Christoffer Dall
• [PATCH v7 08/11] KVM: arm64: introduce vcpu->arch.debug_ptr   Christoffer Dall
• [PATCH 1/3] arm: KVM: define headers and offsets to mange VFP state   Christoffer Dall
• [PATCH 2/3] arm: KVM: Implement lazy VFP switching outside of Hyp Mode   Christoffer Dall
• [PATCH 3/3] arm: KVM: Add VFP lazy switch hooks in Host KVM   Christoffer Dall
• [PATCH 0/3] arm: KVM: VFP lazy switch in KVM Host Mode may save upto 98%   Christoffer Dall
• [PATCH 0/7] KVM: arm/arm64: gsi routing support   Christoffer Dall
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Christoffer Dall
• [PATCH v7 09/11] KVM: arm64: guest debug, HW assisted debug support   Christoffer Dall
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Christoffer Dall
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Christoffer Dall
• [PATCH 12/13] KVM: arm64: implement MSI injection in ITS emulation   Christoffer Dall
• [PATCH 2/3] arm: KVM: Implement lazy VFP switching outside of Hyp Mode   Christoffer Dall
• [PATCH v8 08/11] KVM: arm64: introduce vcpu->arch.debug_ptr   Christoffer Dall
• [PATCH v8 11/11] KVM: arm64: add trace points for guest_debug debug   Christoffer Dall
• [PATCH v8 00/11] KVM Guest Debug support for arm64   Christoffer Dall
• [PATCH] KVM: Add Kconfig option to signal cross-endian guests   Christoffer Dall
• [RFC PATCH] KVM: arm/arm64: Don't let userspace update CNTVOFF once guest is running   Christoffer Dall
• [PATCH v3 08/11] KVM: arm: implement dirty bit mechanism for debug registers   Christoffer Dall
• [RFC PATCH] KVM: arm/arm64: Don't let userspace update CNTVOFF once guest is running   Christoffer Dall
• [RFC PATCH] KVM: arm/arm64: Don't let userspace update CNTVOFF once guest is running   Christoffer Dall
• [RFC PATCH] KVM: arm/arm64: Don't let userspace update CNTVOFF once guest is running   Christoffer Dall
• [RFC PATCH] KVM: arm/arm64: Don't let userspace update CNTVOFF once guest is running   Christoffer Dall
• [RFC PATCH] KVM: arm/arm64: Don't let userspace update CNTVOFF once guest is running   Christoffer Dall
• [PATCH] ARM: kvm: prevent freeing boot_hyp_pgd when CPU_PM is selected   Christoffer Dall
• [PATCH v4 0/2] arm/arm64: KVM: Optimize arm64 fp/simd, saves 30-50% on exits for non-VHE   Christoffer Dall
• [PATCH 02/18] KVM: ARM64: Add initial support for PMU   Christoffer Dall
• [PATCH 03/18] KVM: ARM64: Add offset defines for PMU registers   Christoffer Dall
• [PATCH v4 0/2] arm/arm64: KVM: Optimize arm64 fp/simd, saves 30-50% on exits for non-VHE   Christoffer Dall
• [PATCH 04/18] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register   Christoffer Dall
• [PATCH v4 0/2] arm/arm64: KVM: Optimize arm64 fp/simd, saves 30-50% on exits   Christoffer Dall
• [PATCH] arm64/kvm: Add generic v8 KVM target   Christoffer Dall
• [PATCH 02/18] KVM: ARM64: Add initial support for PMU   Christoffer Dall
• [PATCH] arm64/kvm: Add generic v8 KVM target   Christoffer Dall
• [PATCH 03/18] KVM: ARM64: Add offset defines for PMU registers   Christoffer Dall
• [PATCH 04/18] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register   Christoffer Dall
• [PATCH 02/18] KVM: ARM64: Add initial support for PMU   Christoffer Dall
• [PATCH 06/18] KVM: ARM64: Add reset and access handlers for PMCEID0_EL0 and PMCEID1_EL0 register   Christoffer Dall
• [PATCH 07/18] KVM: ARM64: PMU: Add perf event map and introduce perf event creating function   Christoffer Dall
• [PATCH 09/18] KVM: ARM64: Add reset and access handlers for PMXEVCNTR_EL0 register   Christoffer Dall
• [PATCH 10/18] KVM: ARM64: Add reset and access handlers for PMCCNTR_EL0 register   Christoffer Dall
• [PATCH 11/18] KVM: ARM64: Add reset and access handlers for PMCNTENSET_EL0 and PMCNTENCLR_EL0 register   Christoffer Dall
• [PATCH 12/18] KVM: ARM64: Add reset and access handlers for PMINTENSET_EL1 and PMINTENCLR_EL1 register   Christoffer Dall
• [PATCH 13/18] KVM: ARM64: Add reset and access handlers for PMOVSSET_EL0 and PMOVSCLR_EL0 register   Christoffer Dall
• [PATCH 14/18] KVM: ARM64: Add reset and access handlers for PMUSERENR_EL0 register   Christoffer Dall
• [PATCH 13/18] KVM: ARM64: Add reset and access handlers for PMOVSSET_EL0 and PMOVSCLR_EL0 register   Christoffer Dall
• [PATCH 15/18] KVM: ARM64: Add reset and access handlers for PMSWINC_EL0 register   Christoffer Dall
• [PATCH 16/18] KVM: ARM64: Add access handlers for PMEVCNTRn_EL0 and PMEVTYPERn_EL0 register   Christoffer Dall
• [PATCH 17/18] KVM: ARM64: Add PMU overflow interrupt routing   Christoffer Dall
• [PATCH 18/18] KVM: ARM64: Add KVM_CAP_ARM_PMU and KVM_ARM_PMU_SET_IRQ   Christoffer Dall
• [PATCH v2 04/10] KVM: arm/arm64: vgic: Allow HW irq to be encoded in LR   Christoffer Dall
• [PATCH v2 06/10] KVM: arm/arm64: vgic: Allow dynamic mapping of physical/virtual interrupts   Christoffer Dall
• [PATCH v2 07/10] KVM: arm/arm64: vgic: Allow HW interrupts to be queued to a guest   Christoffer Dall
• [PATCH v2 10/10] KVM: arm/arm64: vgic: Allow non-shared device HW interrupts   Christoffer Dall
• [PATCH v2 02/10] arm/arm64: KVM: Move vgic handling to a non-preemptible section   Christoffer Dall
• [PATCH v2 03/10] KVM: arm/arm64: vgic: Convert struct vgic_lr to use bitfields   Christoffer Dall
• [PATCH v2 05/10] KVM: arm/arm64: vgic: Relax vgic_can_sample_irq for edge IRQs   Christoffer Dall
• [PATCH v2 08/10] KVM: arm/arm64: vgic: Add vgic_{get,set}_phys_irq_active   Christoffer Dall
• [PATCH v2 09/10] KVM: arm/arm64: timer: Allow the timer to control the active state   Christoffer Dall
• [PATCH 1/2] KVM: arm: rename pause into power_off   Christoffer Dall
• [PATCH 2/2] kvm: arm/arm64: implement kvm_arm_[halt, resume]_guest   Christoffer Dall
• X-Gene: Unhandled fault: synchronous external abort in pci_generic_config_read32   Dall, Elizabeth J
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Magnus Damm
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Magnus Damm
• [PATCH] ARM: multi_v7_defconfig: Remove Marzen   Magnus Damm
• [PATCH] ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig   Magnus Damm
• [PATCH 0/3] arm64, mm: Use IPIs for TLB invalidation.   David Daney
• [PATCH 1/3] arm64, mm: Add flush_tlb_all_local() function.   David Daney
• [PATCH 2/3] arm64, mm: Use flush_tlb_all_local() in flush_context().   David Daney
• [PATCH 3/3] arm64, mm: Use IPIs for TLB invalidation.   David Daney
• [PATCH 3/3] arm64, mm: Use IPIs for TLB invalidation.   David Daney
• [PATCH] arm64: Define HAVE_ARCH_PIO_SIZE and related symbols.   David Daney
• [PATCH] arm64: Define HAVE_ARCH_PIO_SIZE and related symbols.   David Daney
• [PATCH] arm64: Define HAVE_ARCH_PIO_SIZE and related symbols.   David Daney
• [PATCH] arm64: Define HAVE_ARCH_PIO_SIZE and related symbols.   David Daney
• [PATCH 0/5] arm64, pci: Add ECAM/PCIe support for Cavium ThunderX   David Daney
• [PATCH 1/5] pci: Add is_pcierc element to struct pci_bus   David Daney
• [PATCH 2/5] gic-its: Allow pci_requester_id to be overridden.   David Daney
• [PATCH 3/5] arm64, pci: Allow RC drivers to supply pcibios_add_device() implementation.   David Daney
• [PATCH 4/5] irqchip: gic-v3: Add gic_get_irq_domain() to get the irqdomain of the GIC.   David Daney
• [PATCH 5/5] PCI: Add host drivers for Cavium ThunderX processors.   David Daney
• [PATCH 4/5] irqchip: gic-v3: Add gic_get_irq_domain() to get the irqdomain of the GIC.   David Daney
• [PATCH 4/5] irqchip: gic-v3: Add gic_get_irq_domain() to get the irqdomain of the GIC.   David Daney
• [PATCH 5/5] PCI: Add host drivers for Cavium ThunderX processors.   David Daney
• [PATCH 3/5] arm64, pci: Allow RC drivers to supply pcibios_add_device() implementation.   David Daney
• [PATCH 4/5] irqchip: gic-v3: Add gic_get_irq_domain() to get the irqdomain of the GIC.   David Daney
• [PATCH 3/5] arm64, pci: Allow RC drivers to supply pcibios_add_device() implementation.   David Daney
• [PATCH 1/3] Docs: dt: add generic MSI bindings   David Daney
• [PATCH 1/3] net: mdio-octeon: Modify driver to work on both ThunderX and Octeon   David Daney
• [PATCH v2 0/2] pci: xgene: Add multiple memory ranges support   Duc Dang
• [PATCH v3 0/2] pci: xgene: Add multiple memory ranges support   Duc Dang
• [PATCH v3 1/2] arm64: dts: Add 1 more window with large size for X-Gene PCIe nodes   Duc Dang
• [PATCH v3 2/2] pci: xgene: Fix driver to handle multiple memory ranges   Duc Dang
• [PATCH v2 0/2] pci: xgene: Add multiple memory ranges support   Duc Dang
• [PATCH v3 14/15] PCI/MSI: pci-xgene-msi: Get rid of struct msi_controller   Duc Dang
• [PATCH v3 0/2] pci: xgene: Add multiple memory ranges support   Duc Dang
• X-Gene: Unhandled fault: synchronous external abort in pci_generic_config_read32   Duc Dang
• [PATCH 0/2 RESEND] power: reset: Add syscon reboot/poweroff device nodes for APM X-Gene platform   Duc Dang
• X-Gene: Unhandled fault: synchronous external abort in pci_generic_config_read32   Duc Dang
• X-Gene: Unhandled fault: synchronous external abort in pci_generic_config_read32   Duc Dang
• [PATCH 0/2 RESEND] power: reset: Add syscon reboot/poweroff device nodes for APM X-Gene platform   Duc Dang
• X-Gene: Unhandled fault: synchronous external abort in pci_generic_config_read32   Duc Dang
• X-Gene: Unhandled fault: synchronous external abort in pci_generic_config_read32   Duc Dang
• Need to disable I2C support globally for enable SPI support on gpio-mcp23s08.c?   Daniel.
• How to encode being an I2C slave in DT?   Andrey Danin
• [PATCH v3 0/4] arm: tegra: implement NVEC driver using tegra i2c.   Andrey Danin
• [PATCH v3 1/4] i2c: tegra: implement slave mode   Andrey Danin
• [PATCH v3 2/4] staging/nvec: reimplement on top of tegra i2c driver   Andrey Danin
• [PATCH v3 3/4] staging/nvec: remove old code   Andrey Danin
• [PATCH v3 4/4] dt: paz00: define nvec as child of i2c bus   Andrey Danin
• [PATCH v3 4/4] dt: paz00: define nvec as child of i2c bus   Andrey Danin
• [PATCH v3 0/4] arm: tegra: implement NVEC driver using tegra i2c.   Andrey Danin
• [PATCH v3 4/4] dt: paz00: define nvec as child of i2c bus   Andrey Danin
• [PATCH v3 1/4] i2c: tegra: implement slave mode   Andrey Danin
• [PATCH 7/7] ARM64: zynqmp: Add eeprom memories on i2c bus   Shubhrajyoti Datta
• [PATCH v2] ARM64: zynqmp: Add eeprom memories on i2c bus   Shubhrajyoti Datta
• [PATCH 0/2] iommu/arm-smmu: fixes for 4.2   Will Deacon
• [PATCH v7 09/11] KVM: arm64: guest debug, HW assisted debug support   Will Deacon
• [PATCH v7 09/11] KVM: arm64: guest debug, HW assisted debug support   Will Deacon
• [PATCH v7 09/11] KVM: arm64: guest debug, HW assisted debug support   Will Deacon
• [PATCH 1/2] arm64: Blacklist non-kprobe-able symbols   Will Deacon
• [PATCH v2 0/9] bugfixs and add support for non-pci devices   Will Deacon
• [PATCH v4 1/2] ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro   Will Deacon
• [PATCH v3 08/11] KVM: arm: implement dirty bit mechanism for debug registers   Will Deacon
• [PATCH] ARM: perf: extend interrupt-affinity property for PPIs   Will Deacon
• [PATCH 0/9] locking/qrwlock: get qrwlocks up and running on arm64   Will Deacon
• [PATCH 1/9] locking/qrwlock: include <linux/spinlock.h> for arch_spin_{lock, unlock}   Will Deacon
• [PATCH 2/9] locking/qrwlock: avoid redundant atomic_add_return on read_lock_slowpath   Will Deacon
• [PATCH 3/9] locking/qrwlock: tidy up rspin_until_writer_unlock   Will Deacon
• [PATCH 4/9] locking/qrwlock: implement queue_write_unlock using smp_store_release   Will Deacon
• [PATCH 5/9] locking/qrwlock: remove redundant cmpxchg barriers on writer slow-path   Will Deacon
• [PATCH 6/9] locking/qrwlock: allow architectures to hook in to contended paths   Will Deacon
• [PATCH 7/9] locking/qrwlock: expose internal lock structure in qrwlock definition   Will Deacon
• [PATCH 8/9] arm64: cmpxchg: implement cmpxchg_relaxed   Will Deacon
• [PATCH 9/9] arm64: locking: replace read/write locks with generic qrwlock code   Will Deacon
• [PATCH 2/9] locking/qrwlock: avoid redundant atomic_add_return on read_lock_slowpath   Will Deacon
• [PATCH] arm64: lib: use pair accessors for copy_*_user routines   Will Deacon
• [RFC PATCH] arm64: force CONFIG_SMP=y and remove redundant #ifdefs   Will Deacon
• [PATCH 5/9] locking/qrwlock: remove redundant cmpxchg barriers on writer slow-path   Will Deacon
• [PATCH 6/9] locking/qrwlock: allow architectures to hook in to contended paths   Will Deacon
• [PATCH 2/9] locking/qrwlock: avoid redundant atomic_add_return on read_lock_slowpath   Will Deacon
• [RFC PATCH] arm64: force CONFIG_SMP=y and remove redundant #ifdefs   Will Deacon
• Master-aware devices and sideband ID data   Will Deacon
• [PATCH v3 08/11] KVM: arm: implement dirty bit mechanism for debug registers   Will Deacon
• [PATCH v2 5/9] iommu/arm-smmu: skip the execution of CMD_PREFETCH_CONFIG   Will Deacon
• [PATCH 01/18] ARM64: Move PMU register related defines to asm/pmu.h   Will Deacon
• [PATCH v2 6/9] iommu/arm-smmu: to support probe deferral   Will Deacon
• [GIT PULL] iommu/arm-smmu: ARM SMMUv3 fixes for 4.2   Will Deacon
• [PATCH 00/18] arm64: support for 8.1 LSE atomic instructions   Will Deacon
• [PATCH 01/18] arm64: cpufeature.h: add missing #include of kernel.h   Will Deacon
• [PATCH 02/18] arm64: atomics: move ll/sc atomics into separate header file   Will Deacon
• [PATCH 03/18] arm64: elf: advertise 8.1 atomic instructions as new hwcap   Will Deacon
• [PATCH 04/18] arm64: alternatives: add cpu feature for lse atomics   Will Deacon
• [PATCH 05/18] arm64: introduce CONFIG_ARM64_LSE_ATOMICS as fallback to ll/sc atomics   Will Deacon
• [PATCH 06/18] arm64: atomics: patch in lse instructions when supported by the CPU   Will Deacon
• [PATCH 07/18] arm64: locks: patch in lse instructions when supported by the CPU   Will Deacon
• [PATCH 08/18] arm64: bitops: patch in lse instructions when supported by the CPU   Will Deacon
• [PATCH 09/18] arm64: xchg: patch in lse instructions when supported by the CPU   Will Deacon
• [PATCH 10/18] arm64: cmpxchg: patch in lse instructions when supported by the CPU   Will Deacon
• [PATCH 11/18] arm64: cmpxchg_dbl: patch in lse instructions when supported by the CPU   Will Deacon
• [PATCH 12/18] arm64: cmpxchg: avoid "cc" clobber in ll/sc routines   Will Deacon
• [PATCH 13/18] arm64: cmpxchg: avoid memory barrier on comparison failure   Will Deacon
• [PATCH 14/18] arm64: atomics: tidy up common atomic{,64}_* macros   Will Deacon
• [PATCH 15/18] arm64: atomics: prefetch the destination word for write prior to stxr   Will Deacon
• [PATCH 16/18] arm64: atomics: implement atomic{, 64}_cmpxchg using cmpxchg   Will Deacon
• [PATCH 17/18] arm64: atomic64_dec_if_positive: fix incorrect branch condition   Will Deacon
• [PATCH 18/18] arm64: kconfig: select HAVE_CMPXCHG_LOCAL   Will Deacon
• [PATCH 13/18] arm64: cmpxchg: avoid memory barrier on comparison failure   Will Deacon
• [PATCH 13/18] arm64: cmpxchg: avoid memory barrier on comparison failure   Will Deacon
• [PATCH 13/18] arm64: cmpxchg: avoid memory barrier on comparison failure   Will Deacon
• [PATCH 3/3] arm64, mm: Use IPIs for TLB invalidation.   Will Deacon
• [PATCH] arm64: Define HAVE_ARCH_PIO_SIZE and related symbols.   Will Deacon
• [PATCH 3/3] arm64, mm: Use IPIs for TLB invalidation.   Will Deacon
• [PATCH] arm64: Define HAVE_ARCH_PIO_SIZE and related symbols.   Will Deacon
• [PATCH] arm64: Define HAVE_ARCH_PIO_SIZE and related symbols.   Will Deacon
• [PATCH] arm64: Split out platform options to separate Kconfig   Will Deacon
• [PATCH 0/5] arm64, pci: Add ECAM/PCIe support for Cavium ThunderX   Will Deacon
• [PATCH 2/2] arm/smmu: Make use of of_parse_phandle_with_var_args   Will Deacon
• [PATCH 1/2] of: base: Allow more args than MAX_PHANDLE_ARGS if required   Will Deacon
• [PATCH 10/13] arm64: Add support for running Linux in EL2 mode   Will Deacon
• [PATCH 11/13] arm64: Panic when VHE and non VHE CPUs coexist   Will Deacon
• [PATCH 03/13] arm64: Add ARM64_HAS_VIRT_HOST_EXTN feature   Will Deacon
• [PATCH 01/13] arm/arm64: Add new is_kernel_in_hyp_mode predicate   Will Deacon
• [PATCH] arm64: alternative: Provide if/else/endif assembler macros   Will Deacon
• [PATCH] arm64: enable more compressed Image formats   Will Deacon
• [PATCH] arm64: remove dead code   Will Deacon
• [PATCH] arm64: Better native ptrace support for compat tasks   Will Deacon
• Master-aware devices and sideband ID data   Will Deacon
• [RFC 2/3] arm64: refactor save_stack_trace()   Will Deacon
• [PATCH 3/5] arm64: kernel: Add min/max values in feature-detection register values.   Will Deacon
• [PATCH] arm64: Better native ptrace support for compat tasks   Will Deacon
• [PATCH 3/5] arm64: kernel: Add min/max values in feature-detection register values.   Will Deacon
• [PATCH 05/18] arm64: introduce CONFIG_ARM64_LSE_ATOMICS as fallback to ll/sc atomics   Will Deacon
• [PATCH] arm64: Minor refactoring of cpu_switch_to() to fix build breakage   Will Deacon
• [PATCH] arm64: switch_to: calculate cpu context pointer using separate register   Will Deacon
• [PATCHv3 1/9] arm: perf: factor arm_pmu core out to drivers   Will Deacon
• [RFC 2/3] arm64: refactor save_stack_trace()   Will Deacon
• [PATCH 1/2] arm64: dma-mapping: implement dma_get_sgtable()   Will Deacon
• [PATCH v2 1/5] arm64: alternative: Provide if/else/endif assembler macros   Will Deacon
• [PATCH v3 5/6] iommu/mediatek: Add mt8173 IOMMU driver   Will Deacon
• [RFC PATCH 3/4] iommu/arm-smmu: Add support for specifying clocks   Will Deacon
• [RFC PATCH 1/4] iommu/arm-smmu: Init driver using IOMMU_OF_DECLARE   Will Deacon
• [PATCH v3 3/6] iommu: add ARM short descriptor page table allocator.   Will Deacon
• [PATCH 07/18] arm64: locks: patch in lse instructions when supported by the CPU   Will Deacon
• [PATCH 12/18] arm64: cmpxchg: avoid "cc" clobber in ll/sc routines   Will Deacon
• [PATCH v3 4/5] arm64: kvm: Adopt new alternative assembler macros   Will Deacon
• [PATCH v3 6/6] arm64: kernel: Add support for Privileged Access Never   Will Deacon
• [PATCH v3 6/6] arm64: kernel: Add support for Privileged Access Never   Will Deacon
• [PATCH v3 6/6] arm64: kernel: Add support for Privileged Access Never   Will Deacon
• [PATCH v4] arm64: kernel: Add support for Privileged Access Never   Will Deacon
• [PATCH 07/18] arm64: locks: patch in lse instructions when supported by the CPU   Will Deacon
• [PATCH v4 3/4] arm64: Add Broadcom iProc family support   Will Deacon
• [PATCH v2 00/20] arm64: support for 8.1 LSE atomic instructions   Will Deacon
• [PATCH v2 01/20] arm64: rwlocks: don't fail trylock purely due to contention   Will Deacon
• [PATCH v2 02/20] documentation: Clarify failed cmpxchg memory ordering semantics   Will Deacon
• [PATCH v2 03/20] arm64: cpufeature.h: add missing #include of kernel.h   Will Deacon
• [PATCH v2 04/20] arm64: atomics: move ll/sc atomics into separate header file   Will Deacon
• [PATCH v2 05/20] arm64: elf: advertise 8.1 atomic instructions as new hwcap   Will Deacon
• [PATCH v2 06/20] arm64: alternatives: add cpu feature for lse atomics   Will Deacon
• [PATCH v2 07/20] arm64: introduce CONFIG_ARM64_LSE_ATOMICS as fallback to ll/sc atomics   Will Deacon
• [PATCH v2 08/20] arm64: atomics: patch in lse instructions when supported by the CPU   Will Deacon
• [PATCH v2 09/20] arm64: locks: patch in lse instructions when supported by the CPU   Will Deacon
• [PATCH v2 10/20] arm64: bitops: patch in lse instructions when supported by the CPU   Will Deacon
• [PATCH v2 11/20] arm64: xchg: patch in lse instructions when supported by the CPU   Will Deacon
• [PATCH v2 12/20] arm64: cmpxchg: patch in lse instructions when supported by the CPU   Will Deacon
• [PATCH v2 13/20] arm64: cmpxchg_dbl: patch in lse instructions when supported by the CPU   Will Deacon
• [PATCH v2 14/20] arm64: cmpxchg: avoid "cc" clobber in ll/sc routines   Will Deacon
• [PATCH v2 15/20] arm64: cmpxchg: avoid memory barrier on comparison failure   Will Deacon
• [PATCH v2 16/20] arm64: atomics: tidy up common atomic{,64}_* macros   Will Deacon
• [PATCH v2 17/20] arm64: atomics: prefetch the destination word for write prior to stxr   Will Deacon
• [PATCH v2 18/20] arm64: atomics: implement atomic{, 64}_cmpxchg using cmpxchg   Will Deacon
• [PATCH v2 19/20] arm64: atomic64_dec_if_positive: fix incorrect branch condition   Will Deacon
• [PATCH v2 20/20] arm64: kconfig: select HAVE_CMPXCHG_LOCAL   Will Deacon
• [PATCH] arm64: pci: add support for pci_mmap_page_range   Will Deacon
• [PATCH v3 3/6] iommu: add ARM short descriptor page table allocator.   Will Deacon
• [PATCH v3 5/6] iommu/mediatek: Add mt8173 IOMMU driver   Will Deacon
• [PATCH v4] arm64: kernel: Add support for Privileged Access Never   Will Deacon
• [PATCH v2 02/20] documentation: Clarify failed cmpxchg memory ordering semantics   Will Deacon
• [PATCH v2 02/20] documentation: Clarify failed cmpxchg memory ordering semantics   Will Deacon
• [PATCH v3 3/6] iommu: add ARM short descriptor page table allocator.   Will Deacon
• [PATCH v3 5/6] iommu/mediatek: Add mt8173 IOMMU driver   Will Deacon
• [PATCH 2/2] arm64: Use last level TLBI for user pte changes   Will Deacon
• [RFC V2] arm64:use set_fixmap_offset to make it more clear   Will Deacon
• [PATCH v3 3/6] iommu: add ARM short descriptor page table allocator.   Will Deacon
• [PATCH] arm64: pci: add support for pci_mmap_page_range   Will Deacon
• [PATCH v4 0/4] arm64: IOMMU-backed DMA mapping   Will Deacon
• [PATCH v3 0/5] iommu/arm-smmu: add support for non-pci devices   Will Deacon
• [PATCH v3 3/6] iommu: add ARM short descriptor page table allocator.   Will Deacon
• [PATCH] arm64: pci: add support for pci_mmap_page_range   Will Deacon
• [PATCH v2] arm64/efi: prefer AllocatePages() over efi_low_alloc() for vmlinux   Will Deacon
• [PATCH v3 5/6] iommu/mediatek: Add mt8173 IOMMU driver   Will Deacon
• bug in identity map for 4KB pages?   Will Deacon
• [PATCH] iommu/arm-smmu-v2: ThunderX(errata-23399) mis-extends 64bit registers   Will Deacon
• [RFC] arm64:change jump_label to use branch instruction, not use NOP instr   Will Deacon
• [PATCH v2 1/9] iommu/io-pgtable-arm: Allow appropriate DMA API use   Will Deacon
• [PATCH] iommu/arm-smmu-v2: ThunderX(errata-23399) mis-extends 64bit registers   Will Deacon
• [PATCH v3 3/6] iommu: add ARM short descriptor page table allocator.   Will Deacon
• [GIT PULL] ARM perf updates for 4.3   Will Deacon
• [PATCH] thermal: consistently use int for temperatures   Jean Delvare
• [PATCH] pinctrl: at91: fix null pointer dereference   Ludovic Desroches
• [PATCH] pinctrl: at91: fix null pointer dereference   Ludovic Desroches
• [RESEND PATCH 1/2] pinctrl: change function behavior for per pin muxing controllers   Ludovic Desroches
• [RESEND PATCH 1/2] pinctrl: change function behavior for per pin muxing controllers   Ludovic Desroches
• [RESEND PATCH 2/2] pinctrl: introduce complex pin description   Ludovic Desroches
• [PATCH] pinctrl: at91: fix null pointer dereference   Ludovic Desroches
• [RESEND PATCH 2/2] pinctrl: introduce complex pin description   Ludovic Desroches
• [PATCH 0/2] dmaengine: Add scatter-gathered memset support   Ludovic Desroches
• [PATCH] dmaengine: at_xdmac: fix bug in prep_dma_cyclic   Ludovic Desroches
• [RESEND PATCH 1/2] pinctrl: change function behavior for per pin muxing controllers   Ludovic Desroches
• [RESEND PATCH] pinctrl: at91: fix null pointer dereference   Ludovic Desroches
• [RESEND PATCH] pinctrl: at91: fix null pointer dereference   Ludovic Desroches
• [RESEND PATCH] pinctrl: at91: fix null pointer dereference   Ludovic Desroches
• [RFC PATCH 0/3] New Atmel PIO4 pinctrl/gpio driver   Ludovic Desroches
• [RFC PATCH 1/3] pinctrl: introduce driver for Atmel PIO4 controller   Ludovic Desroches
• [RFC PATCH 2/3] ARM: at91/dt: add sama5d2 pinmux   Ludovic Desroches
• [RFC PATCH 3/3] ARM: at91/dt: add pinctrl   Ludovic Desroches
• [PATCH v3 4/4] dt: paz00: define nvec as child of i2c bus   Marc Dietrich
• [PATCH v3 4/4] dt: paz00: define nvec as child of i2c bus   Marc Dietrich
• [PATCH v2] ARM: dts: ls1021a: add wakeup device ftm0 node for ls1021a   Wang Dongsheng
• [PATCH 3/3] ARM: errata 430973: move !ARCH_MULTIPLATFORM to Kconfig   Ben Dooks
• [PATCH v1 0/4] ARM: imx6ul: add fec1 and fec2 support for i.MX6ul 14x14 evk board   Fugang Duan
• [PATCH v1 1/4] ARM: imx6ul: add fec bits to GPR syscon definition   Fugang Duan
• [PATCH v1 2/4] ARM: imx6ul: add fec MAC refrence clock and phy fixup init   Fugang Duan
• [PATCH v1 3/4] ARM: dts: imx: add fec1 and fec2 nodes for SOC i.MX6UL   Fugang Duan
• [PATCH v1 4/4] ARM: dts: imx6ul-14x14-evk: add fec1 and fec2 support   Fugang Duan
• [PATCH v2 0/4] ARM: imx6ul: add fec1 and fec2 support for i.MX6ul 14x14 evk board   Fugang Duan
• [PATCH v2 1/4] ARM: imx6ul: add fec bits to GPR syscon definition   Fugang Duan
• [PATCH v2 2/4] ARM: imx6ul: add fec MAC refrence clock and phy fixup init   Fugang Duan
• [PATCH v2 3/4] ARM: dts: imx: add fec1 and fec2 nodes for SOC i.MX6UL   Fugang Duan
• [PATCH v2 4/4] ARM: dts: imx6ul-14x14-evk: add fec1 and fec2 support   Fugang Duan
• [PATCH v3 1/5] ARM/PCI: remove align_resource callback in pcibios_align_resource   Liviu Dudau
• [PATCH v3 1/5] ARM/PCI: remove align_resource callback in pcibios_align_resource   Liviu Dudau
• [PATCH v4 1/8] Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol   Liviu Dudau
• [PATCH] dtb: Create a common home for cross-architecture dtsi files.   Liviu Dudau
• [PATCH v2] PCI: Store PCIe bus address in struct of_pci_range   Liviu Dudau
• [PATCH v4 6/8] arm64: dts: add SRAM, MHU mailbox and SCPI support on Juno   Liviu Dudau
• [PATCH v4 7/8] arm64: dts: add CPU topology on Juno   Liviu Dudau
• [PATCH v4 8/8] arm64: dts: add clock support for all the cpus   Liviu Dudau
• [PATCH v4 6/8] arm64: dts: add SRAM, MHU mailbox and SCPI support on Juno   Liviu Dudau
• [PATCHv2 0/3] regmap: Use different lockdep class for each regmap init call   Liviu Dudau
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Liviu Dudau
• [PATCH v3] dtb: Create a common home for cross-architecture dtsi files.   Liviu Dudau
• [PATCH] pinctrl: at91: fix null pointer dereference   David Dueck
• [PATCH RFC 0/2] RT-Preempt on SAMA5   David Dueck
• [PATCH RFC 1/2] at91: make using irqs for clock handling optional   David Dueck
• [PATCH 2/2] at91: use request_irq/free_irq instead of setup_irq/remove_irq   David Dueck
• [PATCH v2 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Joachim Eastwood
• [PATCH v2 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Joachim Eastwood
• [PATCH v4 0/2] NXP SPIFI driver for LPC18xx/43xx familiy   Joachim Eastwood
• [PATCH v4 1/2] mtd: spi-nor: add driver for NXP SPI Flash Interface (SPIFI)   Joachim Eastwood
• [PATCH v4 2/2] doc: dt: add documentation for nxp,lpc1773-spifi   Joachim Eastwood
• [PATCH v4 0/2] USB OTG PHY driver for NXP LPC18xx family   Joachim Eastwood
• [PATCH v4 1/2] phy: add lpc18xx usb otg phy driver   Joachim Eastwood
• [PATCH v4 2/2] phy: dt bindings: add NXP LPC18xx/43xx USB OTG PHY bindings   Joachim Eastwood
• [PATCH 0/4] PL08x DT bindings and LPC18xx DMA support   Joachim Eastwood
• [PATCH 1/4] dmaengine: pl08x: support dt channel assignment   Joachim Eastwood
• [PATCH 2/4] doc: dt: dma: add binding doc for pl08x   Joachim Eastwood
• [PATCH 3/4] dmaengine: add driver for lpc18xx dmamux   Joachim Eastwood
• [PATCH 4/4] doc: dt: dma: add bindings for lpc1850-dmamux   Joachim Eastwood
• [PATCH v3 0/2] RTC support for NXP LPC18xx family   Joachim Eastwood
• [PATCH v3 1/2] rtc: add rtc-lpc24xx driver   Joachim Eastwood
• [PATCH v3 2/2] doc: dt: add documentation for nxp,lpc1788-rtc   Joachim Eastwood
• [PATCH 0/2] CREG clk driver for NXP LPC18xx family   Joachim Eastwood
• [PATCH 1/2] clk: add lpc18xx creg clk driver   Joachim Eastwood
• [PATCH 2/2] doc: dt: add documentation for lpc1850-creg-clk driver   Joachim Eastwood
• [PATCH 0/2] I2C support for NXP LPC18xx family   Joachim Eastwood
• [PATCH 1/2] i2c: add i2c-lpc2k driver   Joachim Eastwood
• [PATCH 2/2] doc: dt: add documentation for i2c-lpc2k   Joachim Eastwood
• [PATCH v3 1/2] rtc: add rtc-lpc24xx driver   Joachim Eastwood
• [PATCH v2 0/2] Add support for PL172 memory-controller   Joachim Eastwood
• [PATCH v2 1/2] memory: add ARM PL172 MultiPort Memory Controller driver   Joachim Eastwood
• [PATCH v2 2/2] doc: dt: add documentation for pl172 memory bindings   Joachim Eastwood
• [PATCH 00/17] LPC18xx DTS changes for 4.3   Joachim Eastwood
• [PATCH 01/17] ARM: dts: lpc18xx: add cgu and ccu clock-controller nodes   Joachim Eastwood
• [PATCH 02/17] ARM: dts: lpc18xx: add uart new compat string and clk names   Joachim Eastwood
• [PATCH 03/17] ARM: dts: lpc18xx: add pinctrl node   Joachim Eastwood
• [PATCH 04/17] ARM: dts: lpc18xx: add gpio node   Joachim Eastwood
• [PATCH 05/17] ARM: dts: lpc18xx: add ssp nodes   Joachim Eastwood
• [PATCH 06/17] ARM: dts: lpc18xx: add can nodes   Joachim Eastwood
• [PATCH 07/17] ARM: dts: lpc18xx: add mmcsd node   Joachim Eastwood
• [PATCH 08/17] ARM: dts: lpc18xx: add creg (syscon) node   Joachim Eastwood
• [PATCH 09/17] ARM: dts: lpc18xx: add ethernet node   Joachim Eastwood
• [PATCH 10/17] ARM: dts: lpc18xx: add usb nodes   Joachim Eastwood
• [PATCH 11/17] ARM: dts: lpc4357-ea4357: add pinctrl and uart0 muxing   Joachim Eastwood
• [PATCH 12/17] ARM: dts: lpc4357-ea4357: add mmcsd   Joachim Eastwood
• [PATCH 13/17] ARM: dts: lpc4357-ea4357: add gpio joystick   Joachim Eastwood
• [PATCH 14/17] ARM: dts: lpc4357-ea4357: add ethernet   Joachim Eastwood
• [PATCH 15/17] ARM: dts: lpc4357-ea4357: add uart3   Joachim Eastwood
• [PATCH 16/17] of: add vendor prefix for CIAA project   Joachim Eastwood
• [PATCH 17/17] ARM: dts: add DT for CIAA LPC4337 industrial computer   Joachim Eastwood
• [PATCH v4 0/2] USB OTG PHY driver for NXP LPC18xx family   Joachim Eastwood
• [PATCH v3 0/2] RTC support for NXP LPC18xx family   Joachim Eastwood
• next-20150722 build: 2 failures 75 warnings (next-20150722)   Joachim Eastwood
• [PATCH] memory: pl172: fix modular build   Joachim Eastwood
• [PATCH] bcma: populate bus DT subnodes as platform_device-s   Joachim Eastwood
• [PATCH] bcma: populate bus DT subnodes as platform_device-s   Joachim Eastwood
• [PATCH v4 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Joachim Eastwood
• [PATCH 2/2] DT: pwm: Add NXP LPC18xx PWM/SCT binding documentation   Joachim Eastwood
• [PATCH 2/2] DT: pwm: Add NXP LPC18xx PWM/SCT binding documentation   Joachim Eastwood
• [PATCH 0/9] LPC18xx DTS changes for 4.3 part2   Joachim Eastwood
• [PATCH 1/9] ARM: dts: lpc18xx: add usb otg phy node   Joachim Eastwood
• [PATCH 2/9] ARM: dts: lpc18xx: add pl111 lcd controller node   Joachim Eastwood
• [PATCH 3/9] ARM: dts: lpc18xx: add pl172 memory-controller node   Joachim Eastwood
• [PATCH 4/9] ARM: dts: lpc4357-ea4357: add usb0   Joachim Eastwood
• [PATCH 5/9] ARM: dts: lpc4357-ea4357: add emc pins and static memory devices   Joachim Eastwood
• [PATCH 6/9] ARM: dts: lpc4357-ea4357: add mmio-gpio leds   Joachim Eastwood
• [PATCH 7/9] ARM: dts: lpc4350-hitex-eval: add pinctrl and uart0 muxing   Joachim Eastwood
• [PATCH 8/9] ARM: dts: lpc4350-hitex-eval: add ethernet   Joachim Eastwood
• [PATCH 9/9] ARM: dts: lpc4350-hitex-eval: add emc pins and static memory devices   Joachim Eastwood
• [PATCH 2/2] DT: pwm: Add NXP LPC18xx PWM/SCT binding documentation   Joachim Eastwood
• [PATCH v4 4/5] tty/serial: at91: add support to FIFOs   Hans-Christian Egtvedt
• ARM: OMAP2: Delete unnecessary checks before three function calls   SF Markus Elfring
• [PATCH V4 2/6] mm: mlock: Add new mlock, munlock, and munlockall system calls   Michael Ellerman
• [PATCH 1/2] Move the pt_regs_offset struct definition from arch to common include file   Michael Ellerman
• [GIT PULL] remoteproc for 4.2   Enrico Weigelt, metux IT consult
• [PATCH 0/6] mmc: sdhci-esdhci-imx: fix cd/wp regression   Enrico Weigelt, metux IT consult
• [PATCH] ARM: dts: imx6qdl-sabreauto: Add HDMI support   Fabio Estevam
• Passing arguments to cmdline or changing the devicetree node??   Fabio Estevam
• [PATCH v2] ARM: dts: imx6qdl-sabreauto: Allow HDMI and LVDS to work simultaneously   Fabio Estevam
• [PATCH v3] ARM: dts: imx6qdl-sabreauto: Allow HDMI and LVDS to work simultaneously   Fabio Estevam
• [PATCH v4] ARM: dts: imx6qdl-sabreauto: Allow HDMI and LVDS to work simultaneously   Fabio Estevam
• [PATCH v2] ARM: dts: imx6qdl-sabreauto: Allow HDMI and LVDS to work simultaneously   Fabio Estevam
• [PATCH] ARM: imx_v6_v7_defconfig: Select CONFIG_IKCONFIG_PROC   Fabio Estevam
• [PATCH] ARM: dts: sabresd: use simple-panel instead of display-timings for LVDS1   Fabio Estevam
• mx6: suspicious RCU usage   Fabio Estevam
• [PATCH v2] dts: ls1021a: Add dts nodes for eTSEC0, eTSEC1 and eTSEC2   Fabio Estevam
• mx6: suspicious RCU usage   Fabio Estevam
• [PATCH v2] dts: ls1021a: Add dts nodes for eTSEC0, eTSEC1 and eTSEC2   Fabio Estevam
• mx6: suspicious RCU usage   Fabio Estevam
• mx6: suspicious RCU usage   Fabio Estevam
• [PATCH] ARM: multi_v7_defconfig: Select MX6UL and MX7D   Fabio Estevam
• [PATCH v2] ARM: appropriate __init annotation for const data   Fabio Estevam
• [PATCH v3 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Fabio Estevam
• [PATCH v3 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Fabio Estevam
• [PATCH v3 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Fabio Estevam
• [PATCH v4 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Fabio Estevam
• [PATCH V3] tty: serial: imx.c: Reset UART before activating interrupts   Fabio Estevam
• [PATCH V2] ARM: BCM5301X: Enable UART0 on tested devices   Florian Fainelli
• [PATCH] ARM: BCM63xx: Remove custom secondary_startup function   Florian Fainelli
• [PATCH] ARM: BCM63xx: fix parameter to of_get_cpu_node in bcm63138_smp_boot_secondary   Florian Fainelli
• [PATCH] ARM: BCM63xx: Remove custom secondary_startup function   Florian Fainelli
• [PATCH] ARM: BCM63xx: fix parameter to of_get_cpu_node in bcm63138_smp_boot_secondary   Florian Fainelli
• [PATCH v3 2/4] dt-bindings: brcmstb-gpio: document properties for wakeup   Florian Fainelli
• [PATCH] ARM: BCM: Restrict Broadcom BCM470X / BCM5301X to non-LPAE   Florian Fainelli
• [PATCH] ARM: BCM: Restrict Broadcom BCM470X / BCM5301X to non-LPAE   Florian Fainelli
• [PATCH] ARM: BCM: Restrict Broadcom BCM470X / BCM5301X to non-LPAE   Florian Fainelli
• [PATCH v2 3/4] arm64: Add Broadcom iProc family support   Florian Fainelli
• [GIT PULL] Broadcom Device Tree changes for 4.3 (part 1)   Florian Fainelli
• [GIT PULL] Broadcom SoC changes for 4.3 (part 1)   Florian Fainelli
• [PATCH 1/1] misc: sram: add dev_pm_ops to support module power gate   Florian Fainelli
• [PATCH] irq-bcm2836: Move SMP boot to the irqchip code.   Florian Fainelli
• [PATCH 2/5] ARM: Add Broadcom Brahma-B15 readahead cache support   Florian Fainelli
• [PATCH 1/2] ARM: BCM5301X: activate some additional options in pl310 cache controller   Florian Fainelli
• [PATCH 2/2] ARM: BCM5301X: Add profiling support   Florian Fainelli
• [PATCH 4/4] irqchip, gicv3-its: Implement Cavium ThunderX errata 22375, 24313   Pavel Fedin
• [PATCH 4/4] irqchip, gicv3-its: Implement Cavium ThunderX errata 22375, 24313   Pavel Fedin
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Pavel Fedin
• [PATCH 7/7] KVM: arm: implement kvm_set_msi by gsi direct mapping   Pavel Fedin
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Pavel Fedin
• [PATCH 7/7] KVM: arm: implement kvm_set_msi by gsi direct mapping   Pavel Fedin
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Pavel Fedin
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Pavel Fedin
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Pavel Fedin
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Pavel Fedin
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Pavel Fedin
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Pavel Fedin
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Pavel Fedin
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Pavel Fedin
• [PATCH v2 0/7] KVM: arm/arm64: gsi routing support   Pavel Fedin
• [PATCH v2 0/7] KVM: arm/arm64: gsi routing support   Pavel Fedin
• [PATCH v2 0/7] KVM: arm/arm64: gsi routing support   Pavel Fedin
• Extensions for KVM MSI related ioctls   Pavel Fedin
• [PATCH v2 4/7] KVM: arm/arm64: enable irqchip routing   Pavel Fedin
• [PATCH v2 15/15] KVM: arm64: enable ITS emulation as a virtual MSI controller   Pavel Fedin
• [PATCH v2 15/15] KVM: arm64: enable ITS emulation as a virtual MSI controller   Pavel Fedin
• [PATCH v2 00/15] KVM: arm64: GICv3 ITS emulation   Pavel Fedin
• [PATCH v2 3/7] KVM: irqchip: convey devid to kvm_set_msi   Pavel Fedin
• [PATCH v2 3/7] KVM: irqchip: convey devid to kvm_set_msi   Pavel Fedin
• [PATCH 8/9] drivers: clk: st: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x   Gabriel Fernandez
• [PATCH 1/9] drivers: clk: st: Incorrect clocks status   Gabriel Fernandez
• [PATCH v2 1/9] drivers: clk: st: Incorrect register offset used for lock_status   Gabriel Fernandez
• [PATCH 0/3] ST PLL improvement   Gabriel Fernandez
• [PATCH 1/3] drivers: clk: st: Support for enable/disable in Clockgen PLLs   Gabriel Fernandez
• [PATCH 2/3] drivers: clk: st: PLL rate change implementation for DVFS   Gabriel Fernandez
• [PATCH 3/3] drivers: clk: st: Correct the pll-type for A9 for stih418   Gabriel Fernandez
• macb: zynq: why is SG disabled?   Nicolas Ferre
• [RESEND PATCH 2/2] ARM: at91/dt: update udc compatible strings   Nicolas Ferre
• [PATCH 5/5] usb: gadget: atmel_usba_udc: add missing ret value check   Nicolas Ferre
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Nicolas Ferre
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Nicolas Ferre
• [PATCH v3] mfd: atmel-hlcdc: implement config synchronization   Nicolas Ferre
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Nicolas Ferre
• [PATCH v4 3/5] tty/serial: at91: remove bunch of macros to access UART registers   Nicolas Ferre
• [PATCH v4 4/5] tty/serial: at91: add support to FIFOs   Nicolas Ferre
• [PATCH v2 2/2] ARM: at91: sama5/dt: update rstc to correct compatible string   Nicolas Ferre
• [PATCH v7 1/2] mfd: devicetree: add bindings for Atmel Flexcom   Nicolas Ferre
• [PATCH v7 2/2] mfd: atmel-flexcom: add a driver for Atmel Flexible Serial Communication Unit   Nicolas Ferre
• [PATCH v7 2/2] mfd: atmel-flexcom: add a driver for Atmel Flexible Serial Communication Unit   Nicolas Ferre
• [PATCH v3] clk: at91: add generated clock driver   Nicolas Ferre
• [RFCv2 2/3] dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.   Nicolas Ferre
• [PATCH v2 1/2] power: reset: at91: add sama5d3 reset function   Nicolas Ferre
• [PATCH 2/2] ARM: at91/dt: sama5d4: move ADC pinctrl to board device trees   Nicolas Ferre
• [PATCH v2 2/2] ARM: at91: at91_dt_defconfig: enable ISI and ov2640 support   Nicolas Ferre
• [RESEND PATCH] pinctrl: at91: fix null pointer dereference   Nicolas Ferre
• [PATCH 1/3] ARM: at91/soc: add basic support for new sama5d2 SoC   Nicolas Ferre
• [PATCH 1/3] ARM: at91/soc: add basic support for new sama5d2 SoC   Nicolas Ferre
• [PATCH v2 0/3] ARM: at91: introducing Atmel sama5d2 SoC   Nicolas Ferre
• [PATCH v2 1/3] ARM: at91/soc: add basic support for new sama5d2 SoC   Nicolas Ferre
• [PATCH v2 2/3] ARM: at91/dt: add basic dtsi for sama5d2 SoC   Nicolas Ferre
• [PATCH v2 3/3] ARM: at91/dt: add minimal sama5d2 Xplained board   Nicolas Ferre
• [PATCH v4] clk: at91: add generated clock driver   Nicolas Ferre
• [PATCH v4 4/5] tty/serial: at91: add support to FIFOs   Nicolas Ferre
• [PATCH 1/5] rtc: at91sam9: properly handle error case   Nicolas Ferre
• [PATCH v2 2/3] ARM: at91/dt: add basic dtsi for sama5d2 SoC   Nicolas Ferre
• [PATCH v4] clk: at91: add generated clock driver   Nicolas Ferre
• [PATCH v3 0/3] ARM: at91: introducing Atmel sama5d2 SoC   Nicolas Ferre
• [PATCH v3 1/3] ARM: at91/soc: add basic support for new sama5d2 SoC   Nicolas Ferre
• [PATCH v3 2/3] ARM: at91/dt: add basic dtsi for sama5d2 SoC   Nicolas Ferre
• [PATCH v3 3/3] ARM: at91/dt: add minimal sama5d2 Xplained board   Nicolas Ferre
• [PATCH v2 1/2] ARM: at91: dts: add isi & ov2640 dt nodes for at91sam9m10g45ek board   Nicolas Ferre
• [PATCH v2 2/2] ARM: at91: at91_dt_defconfig: enable ISI and ov2640 support   Nicolas Ferre
• [PATCH v3 2/3] ARM: at91/dt: add basic dtsi for sama5d2 SoC   Nicolas Ferre
• [PATCH v1 1/2] dt: atmel-usart: document new I/O data register width property   Nicolas Ferre
• [PATCH linux-next 1/1] tty/serial: at91: fix I/O accesses on RHR and THR for AVR32   Nicolas Ferre
• [PATCH v2 2/2] ARM: at91: sama5/dt: update rstc to correct compatible string   Nicolas Ferre
• [GIT PULL] at91: dt for 4.3 #1   Nicolas Ferre
• [PATCH v3] ARM: at91/soc: add basic support for new sama5d2 SoC   Nicolas Ferre
• [PATCH] ARM: at91: at91_dt_defconfig: enable ISI and ov2640 support   Nicolas Ferre
• [PATCH linux-next 1/1] tty/serial: at91: fix I/O accesses on RHR and THR for AVR32   Nicolas Ferre
• linux-next: manual merge of the at91 tree with the arm-soc tree   Nicolas Ferre
• [PATCH v3 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver   Nicolas Ferre
• [PATCH v3 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller   Nicolas Ferre
• [PATCH v5] clk: at91: add generated clock driver   Nicolas Ferre
• [PATCH] clk: at91: add audio pll clock driver   Nicolas Ferre
• [PATCH] thermal: consistently use int for temperatures   Peter Feuerer
• [PATCH v2 1/5] drm/rockchip: vop: optimize virtual stride calculate   Tomasz Figa
• [PATCH v2 2/5] drm/rockchip: vop: fix yuv plane support   Tomasz Figa
• [PATCH v2 2/5] drm/rockchip: vop: fix yuv plane support   Tomasz Figa
• [PATCH v2 3/5] drm/rockchip: vop: support plane scale   Tomasz Figa
• [PATCH v2 4/5] drm/rockchip: vop: switch cursor plane to window 3   Tomasz Figa
• [PATCH v2 5/5] drm/rockchip: default enable win2/3 area0 bit   Tomasz Figa
• [PATCH v2 5/5] drm/rockchip: default enable win2/3 area0 bit   Tomasz Figa
• [PATCH v2 3/5] drm/rockchip: vop: support plane scale   Tomasz Figa
• [PATCH v2 3/5] drm/rockchip: vop: support plane scale   Tomasz Figa
• [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC   Tomasz Figa
• [PATCH v2 10/13] pinctrl: kill off set_irq_flags usage   Tomasz Figa
• [PATCH v2 5/5] drm/rockchip: default enable win2/3 area0 bit   Tomasz Figa
• [PATCH v2 4/5] drm/rockchip: vop: switch cursor plane to window 3   Tomasz Figa
• [PATCHv6 0/2] Adding driver for Xilinx LogiCORE IP mailbox.   Moritz Fischer
• [PATCHv6 1/2] dts: Adding docs for Xilinx LogiCORE IP mailbox driver.   Moritz Fischer
• [PATCHv6 2/2] mailbox: Adding driver for Xilinx LogiCORE IP mailbox.   Moritz Fischer
• [PATCHv7 0/2] Adding driver for Xilinx LogiCORE IP mailbox.   Moritz Fischer
• [PATCHv7 1/2] dts: Adding docs for Xilinx LogiCORE IP mailbox driver.   Moritz Fischer
• [PATCHv7 2/2] mailbox: Adding driver for Xilinx LogiCORE IP mailbox.   Moritz Fischer
• [RFC 0/3] Adding support for Zynq PL reset controller.   Moritz Fischer
• [RFC 1/3] docs: dts: Added documentation for Xilinx Zynq PL Reset bindings.   Moritz Fischer
• [RFC 2/3] dts: zynq: Add devicetree entry for PL reset controller.   Moritz Fischer
• [RFC 3/3] reset: reset-zynq-pl: Adding support for Xilinx Zynq PL reset.   Moritz Fischer
• [RFC 1/3] docs: dts: Added documentation for Xilinx Zynq PL Reset bindings.   Moritz Fischer
• [RFCv2 0/3] Adding support for Zynq Reset Controller   Moritz Fischer
• [RFCv2 1/3] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.   Moritz Fischer
• [RFCv2 2/3] dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.   Moritz Fischer
• [RFCv2 3/3] reset: reset-zynq: Adding support for Xilinx Zynq reset controller.   Moritz Fischer
• [RFCv2 1/3] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.   Moritz Fischer
• [RFCv2 1/3] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.   Moritz Fischer
• [RFCv2 3/3] reset: reset-zynq: Adding support for Xilinx Zynq reset controller.   Moritz Fischer
• [RFCv2 2/3] dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.   Moritz Fischer
• [RFCv2 2/3] dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.   Moritz Fischer
• [RFCv2 1/3] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.   Moritz Fischer
• [RFCv2 3/3] reset: reset-zynq: Adding support for Xilinx Zynq reset controller.   Moritz Fischer
• [PATCHv7 0/2] Adding driver for Xilinx LogiCORE IP mailbox.   Moritz Fischer
• [RFCv2 1/3] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.   Moritz Fischer
• [RFCv3 0/4] Adding support for Zynq Reset Controller   Moritz Fischer
• [RFCv3 1/4] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.   Moritz Fischer
• [RFCv3 2/4] dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.   Moritz Fischer
• [RFCv3 3/4] reset: reset-zynq: Adding support for Xilinx Zynq reset controller.   Moritz Fischer
• [RFCv3 4/4] ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER   Moritz Fischer
• [PATCH v2] arm64/efi: prefer AllocatePages() over efi_low_alloc() for vmlinux   Matt Fleming
• [PATCH v2] arm64/efi: prefer AllocatePages() over efi_low_alloc() for vmlinux   Matt Fleming
• [PATCH 1/2] efi: add 'offset' param to efi_low_alloc()   Matt Fleming
• [PATCH v3 3/4] gpio: brcmstb: Add interrupt and wakeup source support   Gregory Fong
• [PATCH v3 4/4] gpio: brcmstb: support wakeup from S5 cold boot   Gregory Fong
• [PATCH] ARM: BCM: Restrict Broadcom BCM470X / BCM5301X to non-LPAE   Gregory Fong
• [PATCH v4 0/4] GPIO support for BRCMSTB   Gregory Fong
• [PATCH v4 1/4] dt-bindings: brcmstb-gpio: document properties for wakeup   Gregory Fong
• [PATCH v4 2/4] gpio: brcmstb: Add interrupt and wakeup source support   Gregory Fong
• [PATCH v4 3/4] gpio: brcmstb: support wakeup from S5 cold boot   Gregory Fong
• [PATCH v4 4/4] ARM: dts: brcmstb: add BCM7445 GPIO nodes   Gregory Fong
• [PATCH] ARM: dts: Use stdout-path in STM32F429 Discovery board   Andreas Färber
• [PATCH v1 4/7] ARM: dts: apq8064: Add MDP support   Andreas Färber
• [PATCH v1 3/7] ARM: dts: apq8064-ifc6410: add heart-beat led support.   Andreas Färber
• [PATCH v1 7/7] ARM: dts: ifc6410: add inforce LVDS panel support   Andreas Färber
• [PATCH 1/2] drm: sti: fix sub-components bind   Benjamin Gaignard
• [PATCH 2/2] drm: sti: adapt DT to fix probe/bind issues in DRM driver   Benjamin Gaignard
• [PATCH] ARM: dts: sun4i: Add Iteaduino Plus A10   Josef Gajdusek
• [PATCH v2] ARM: dts: sun4i: Add Iteaduino Plus A10   Josef Gajdusek
• [PATCH] arm: Adding support for atomic half word exchange   Sarbojit Ganguly
• [PATCH 1/2] devicetree: bindings: rtc: add bindings for xilinx zynqmp rtc   Suneel Garapati
• [PATCH 2/2] drivers: rtc: add xilinx zynqmp rtc driver   Suneel Garapati
• [PATCH v2 1/2] devicetree: bindings: rtc: add bindings for xilinx zynqmp rtc   Suneel Garapati
• [PATCH v2 2/2] drivers: rtc: add xilinx zynqmp rtc driver   Suneel Garapati
• [PATCH 1/2] watchdog: NXP LPC18XX Windowed Watchdog Timer Driver   Ezequiel Garcia
• [PATCH v2 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Ezequiel Garcia
• [PATCH v2 0/4] mtd: pxa3xx_nand: rework the timing setup   Ezequiel Garcia
• [PATCH v2 0/4] mtd: pxa3xx_nand: rework the timing setup   Ezequiel Garcia
• [PATCH v2 2/4] mtd: pxa3xx_nand: add helpers to setup the timings   Ezequiel Garcia
• [PATCH v2 3/4] mtd: pxa3xx_nand: rework flash detection and timing setup   Ezequiel Garcia
• [PATCH v5 07/12] mtd: nand: add Samsung K9GBG08U0A-M to nand_ids table   Ezequiel Garcia
• [PATCH 1/2] pwm: NXP LPC18xx PWM/SCT driver   Ezequiel Garcia
• [PATCH 2/2] DT: pwm: Add NXP LPC18xx PWM/SCT binding documentation   Ezequiel Garcia
• [PATCH 2/2] DT: pwm: Add NXP LPC18xx PWM/SCT binding documentation   Ezequiel Garcia
• [PATCH 2/2] DT: pwm: Add NXP LPC18xx PWM/SCT binding documentation   Ezequiel Garcia
• [PATCH v3 0/3] ARM: OMAP2+: wkup_m3_rproc support patches   Dave Gerlach
• Build error with !CONFIG_SMP in v4.2-rc1 on arm multi_v7_defconfig   Dave Gerlach
• Build error with !CONFIG_SMP in v4.2-rc1 on arm multi_v7_defconfig   Dave Gerlach
• Build error with !CONFIG_SMP in v4.2-rc1 on arm multi_v7_defconfig   Dave Gerlach
• [PATCH] ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX   Dave Gerlach
• [PATCH v3 0/3] ARM: OMAP2+: wkup_m3_rproc support patches   Dave Gerlach
• [PATCH v4 0/3] ARM: OMAP2+: wkup_m3_rproc support patches   Dave Gerlach
• [PATCH v4 1/3] ARM: OMAP2+: Use pdata-quirks for wkup_m3 reset management   Dave Gerlach
• [PATCH v4 2/3] ARM: dts: AM33xx: Update and move wkup_m3 node to l4 node   Dave Gerlach
• [PATCH v4 3/3] ARM: dts: AM4372: Add the wkupm3 rproc node   Dave Gerlach
• [PATCH v2 0/3] soc: ti: Introduce wkup_m3_ipc driver   Dave Gerlach
• [PATCH v2 1/3] mailbox/omap: Add ti, mbox-send-noirq quirk to fix AM33xx CPU Idle   Dave Gerlach
• [PATCH v2 2/3] Documentation: dt: add bindings for TI Wakeup M3 IPC device   Dave Gerlach
• [PATCH v2 3/3] soc: ti: Add wkup_m3_ipc driver   Dave Gerlach
• [PATCH 0/4] ARM: dts: am335x/am43xx: wkup_m3_ipc support patches   Dave Gerlach
• [PATCH 1/4] ARM: dts: AM33xx: Add ti, mbox-send-noirq to wkup_m3 mailbox   Dave Gerlach
• [PATCH 2/4] ARM: dts: AM4372: Add ti, mbox-send-noirq to wkup_m3 mailbox   Dave Gerlach
• [PATCH 3/4] ARM: dts: AM33xx: Add the wkup_m3_ipc node   Dave Gerlach
• [PATCH 4/4] ARM: dts: AM4372: Add the wkup_m3_ipc node   Dave Gerlach
• [PATCH] ARM: tegra: Enable TPM on tegra124 nyan boards   Simon Glass
• [PATCH v2] tegra: Enable TPM on tegra124 nyan boards   Simon Glass
• [PATCH v2 4/9] arm: twr-k70f120m: timer driver for Kinetis SoC   Thomas Gleixner
• [PATCH v2 4/9] arm: twr-k70f120m: timer driver for Kinetis SoC   Thomas Gleixner
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Thomas Gleixner
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Thomas Gleixner
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Thomas Gleixner
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Thomas Gleixner
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Thomas Gleixner
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Thomas Gleixner
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Thomas Gleixner
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Thomas Gleixner
• [PATCH v2 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Thomas Gleixner
• [PATCH v2 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Thomas Gleixner
• [PATCH v2 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Thomas Gleixner
• [PATCH V3] trace/events: add chip name and hwirq to irq entry tracepoint   Thomas Gleixner
• [PATCH 2/2] at91: use request_irq/free_irq instead of setup_irq/remove_irq   Thomas Gleixner
• [PATCH RFC 1/2] at91: make using irqs for clock handling optional   Thomas Gleixner
• [patch] irqchip/sirfsoc: Fix generic chip allocation wreckage   Thomas Gleixner
• [PATCH v3 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Thomas Gleixner
• [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller   Thomas Gleixner
• [PATCH v3 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Thomas Gleixner
• [PATCH 00/18] ARM: Migrate clockevent drivers to 'set-state'   Thomas Gleixner
• [PATCH v4 0/2] Correct for ACPI 5.1->6.0 spec changes in MADT GICC entries   Thomas Gleixner
• [PATCH V3 1/1] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Thomas Gleixner
• [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller   Thomas Gleixner
• [PATCH v3 09/15] irqchip: gicv3-its: Split PCI/MSI code from the core ITS driver   Thomas Gleixner
• [patch] irqchip/sirfsoc: Fix generic chip allocation wreckage   Thomas Gleixner
• [PATCH 4/6] irqchip: GIC: Use chip_data instead of handler_data for cascaded interrupts   Thomas Gleixner
• [PATCH 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Thomas Gleixner
• [PATCH V3] trace/events: add chip name and hwirq to irq entry tracepoint   Thomas Gleixner
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Thomas Gleixner
• [PATCH v2 00/13] Kill off set_irq_flags   Thomas Gleixner
• [patch 00/11] ARM: Interrupt cleanups and API change preparation   Thomas Gleixner
• [patch 01/11] ARM/orion: Consolidate chained IRQ handler install/remove   Thomas Gleixner
• [patch 02/11] ARM/locomo: Consolidate chained IRQ handler install/remove   Thomas Gleixner
• [patch 03/11] ARM/irq: Use access helper irq_data_get_affinity_mask()   Thomas Gleixner
• [patch 04/11] ARM/LPC32xx: Use irq_set_handler_locked()   Thomas Gleixner
• [patch 05/11] ARM, irq: Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc   Thomas Gleixner
• [patch 06/11] ARM/locomo: Prepare locomo_handler for irq argument removal   Thomas Gleixner
• [patch 07/11] ARM/sa1111: Prepare sa1111_irq_handler for irq argument removal   Thomas Gleixner
• [patch 08/11] ARM/dove: Prepare pmu_irq_handler for irq argument removal   Thomas Gleixner
• [patch 09/11] ARM/pxa: Prepare *_irq_handler for irq argument removal   Thomas Gleixner
• [patch 10/11] ARM/pxa: Prepare balloon3_irq_handler for irq argument removal   Thomas Gleixner
• [patch 11/11] ARM/orion/gpio: Prepare gpio_irq_handler for irq argument removal   Thomas Gleixner
• [patch] ARM64/irq: Use access helper irq_data_get_affinity_mask()   Thomas Gleixner
• [patch] ARM64/irq: Use access helper irq_data_get_affinity_mask()   Thomas Gleixner
• [PATCH] irqchip: omap-intc: improve IRQ handler   Thomas Gleixner
• [PATCH 1/3] nmi: create generic NMI backtrace implementation   Thomas Gleixner
• [PATCH 2/3] nmi: x86: convert to generic nmi handler   Thomas Gleixner
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Thomas Gleixner
• [PATCH 0/5] arm64, pci: Add ECAM/PCIe support for Cavium ThunderX   Thomas Gleixner
• [PATCH V4 1/1] irqchip: imx-gpcv2: IMX GPCv2 drivers for wakeup source and suspend   Thomas Gleixner
• [PATCH V4 1/1] irqchip: imx-gpcv2: IMX GPCv2 drivers for wakeup source and suspend   Thomas Gleixner
• [PATCH V5 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Thomas Gleixner
• [PATCH 3/5] arm64: mediatek: enable MTK_TIMER   Thomas Gleixner
• [PATCH 1/3] clocksource: atmel-st: Remove irq handler when clock event is unused   Thomas Gleixner
• [PATCH 3/3] clocksource: atmel-pit: Remove irq handler when clock event is unused   Thomas Gleixner
• [PATCH 1/3] clocksource: atmel-st: Remove irq handler when clock event is unused   Thomas Gleixner
• [PATCH RESEND] irqchip: omap-intc: improve IRQ handler   Thomas Gleixner
• [PATCH 1/3] clocksource: atmel-st: Remove irq handler when clock event is unused   Thomas Gleixner
• [RFCv2 PATCH 1/8] irqdomain: Introduce irq_domain_ops.init_alloc_info   Thomas Gleixner
• [RFC Patch V1 00/12] Reorganize struct msi_desc to prepare for support of generic MSI   Thomas Gleixner
• [PATCH 0/3] Shared NMI backtracing support for ARM/x86   Thomas Gleixner
• [RFC Patch V1 00/12] Reorganize struct msi_desc to prepare for support of generic MSI   Thomas Gleixner
• [PATCH V5 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Thomas Gleixner
• [PATCH V5 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Thomas Gleixner
• [RFC Patch V1 09/12] genirq: Move msi_list from struct pci_dev to struct device   Thomas Gleixner
• [PATCH 1/5] genirq: irqdomain: Use an accessor for the of_node field   Thomas Gleixner
• [PATCH 1/5] genirq: irqdomain: Use an accessor for the of_node field   Thomas Gleixner
• [PATCH] xen/events: Support event channel rebind on ARM   Thomas Gleixner
• [PATCH v2 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Thomas Gleixner
• [PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Thomas Gleixner
• [PATCH] irqchip: gic: Add a cpu map for each GIC instance   Thomas Gleixner
• [PATCH] ARM/clocksource: use automatic DT probing   Thomas Gleixner
• [linux-sunxi] Re: [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic   Hans de Goede
• [linux-sunxi] Re: [PATCH v3 4/4] power: Add an axp20x-usb-power driver   Hans de Goede
• [linux-sunxi] Re: [PATCH v3 3/4] mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs   Hans de Goede
• [PATCH v6 0/4] musb: sunxi: Add support for the Allwinner sunxi musb   Hans de Goede
• [PATCH v6 1/4] phy-sun4i-usb: Add missing EXPORT_SYMBOL for sun4i_usb_phy_set_squelch_detect   Hans de Goede
• [PATCH v6 2/4] musb: sunxi: Add support for the Allwinner sunxi musb controller   Hans de Goede
• [PATCH v6 3/4] musb: sunxi: Add support for musb controller in A31 SoC   Hans de Goede
• [PATCH v6 4/4] musb: sunxi: Add support for musb controller in A33 SoC   Hans de Goede
• [PATCH v2 1/2] ARM: dts: Add binding documentation for AXP152 PMIC   Hans de Goede
• [PATCH v2 2/2] mfd: ax20x: Add axp152 support   Hans de Goede
• [PATCH] mmc: sunxi: Don't start commands while the card is busy   Hans de Goede
• [PATCH v2] mmc: sunxi: Don't start commands while the card is busy   Hans de Goede
• [linux-sunxi] Re: [PATCH v2 2/2] mfd: ax20x: Add axp152 support   Hans de Goede
• [PATCH v3 1/2] ARM: dts: Add binding documentation for AXP152 PMIC   Hans de Goede
• [PATCH v3 2/2] mfd: axp20x: Add axp152 support   Hans de Goede
• [PATCH v6 1/4] phy-sun4i-usb: Add missing EXPORT_SYMBOL for sun4i_usb_phy_set_squelch_detect   Hans de Goede
• [linux-sunxi] Re: [PATCH v2] mmc: sunxi: Don't start commands while the card is busy   Hans de Goede
• [PATCH 0/4] pinctrl: sunxi: Implement proper irq DT parsing   Hans de Goede
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   Hans de Goede
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   Hans de Goede
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   Hans de Goede
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   Hans de Goede
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   Hans de Goede
• [PATCH 0/3] phy-sun4i-usb: 3 misc. fixes   Hans de Goede
• [PATCH 1/3] phy-sun4i-usb: Add missing EXPORT_SYMBOL for sun4i_usb_phy_set_squelch_detect   Hans de Goede
• [PATCH 2/3] phy-sun4i-sub: Move vbus-detect helper functions up in the file   Hans de Goede
• [PATCH 3/3] phy-sun4i-usb: Only check vbus-det on power-on on boards with vbus-det   Hans de Goede
• [linux-sunxi] [PATCH 6/8] ARM: dts: axp209: Add usb_power_supply child node to the ax209 node   Hans de Goede
• [PATCH] ARM: dts: sun7i: Enable USB DRC on Wexler TAB7200   Hans de Goede
• [PATCH 0/5] ARM: dts: sunxi: Enable USB DRC on a bunch of boards   Hans de Goede
• [PATCH 1/5] ARM: dts: sun4i: Enable USB DRC on A10 OLinuxIno Lime   Hans de Goede
• [PATCH 2/5] ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno Micro   Hans de Goede
• [PATCH 3/5] ARM: dts: sun5i: Enable USB DRC on A13 OLinuxIno   Hans de Goede
• [PATCH 4/5] ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A33 tablet   Hans de Goede
• [PATCH 5/5] ARM: dts: sun7i: Add dts file for Wits Pro A20 DKT   Hans de Goede
• [linux-sunxi] [PATCH 6/8] ARM: dts: axp209: Add usb_power_supply child node to the ax209 node   Hans de Goede
• [linux-sunxi] [PATCH 6/8] ARM: dts: axp209: Add usb_power_supply child node to the ax209 node   Hans de Goede
• [linux-sunxi] Re: [PATCH 5/5] ARM: dts: sun7i: Add dts file for Wits Pro A20 DKT   Hans de Goede
• [PATCH v2 1/3] ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno Micro   Hans de Goede
• [PATCH v2 2/3] ARM: dts: sun5i: Enable USB DRC on A13 OLinuxIno   Hans de Goede
• [PATCH v2 3/3] ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A33 tablet   Hans de Goede
• [linux-sunxi] [PATCH v2 1/3] ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno Micro   Hans de Goede
• [linux-sunxi] [PATCH v5 2/7] phy-sun4i-usb: Add extcon support for the otg phy (phy0)   Hans de Goede
• [PATCH] ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseq   Hans de Goede
• [linux-sunxi] Re: [PATCH 5/5] ARM: dts: sun7i: Add dts file for Wits Pro A20 DKT   Hans de Goede
• [linux-sunxi] Re: [PATCH 5/5] ARM: dts: sun7i: Add dts file for Wits Pro A20 DKT   Hans de Goede
• [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus   Jonas Gorski
• [PATCH v4 1/3] dt-binding: spi: Mediatek: Document devicetree bindings for spi bus   Jonas Gorski
• [PATCH v4 0/3] Add Mediatek SPI bus driver   Jonas Gorski
• [RFC Patch V1 09/12] genirq: Move msi_list from struct pci_dev to struct device   Paul Gortmaker
• [PATCH] mm: Fix up new locking syscalls   Paul Gortmaker
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   Vivek Goyal
• [PATCH 3/3] kexec: Change the timing of callbacks related to "crash_kexec_post_notifiers" boot option   Vivek Goyal
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   Vivek Goyal
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   Vivek Goyal
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   Vivek Goyal
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   Vivek Goyal
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   Vivek Goyal
• [PATCH v2 00/20] xen/arm64: Add support for 64KB page   Julien Grall
• [PATCH v2 01/20] xen: Add Xen specific page definition   Julien Grall
• [PATCH v2 02/20] xen: Introduce a function to split a Linux page into Xen page   Julien Grall
• [PATCH v2 03/20] xen/grant: Introduce helpers to split a page into grant   Julien Grall
• [PATCH v2 04/20] xen/grant: Add helper gnttab_page_grant_foreign_access_ref   Julien Grall
• [PATCH v2 05/20] block/xen-blkfront: Split blkif_queue_request in 2   Julien Grall
• [PATCH v2 06/20] block/xen-blkfront: Store a page rather a pfn in the grant structure   Julien Grall
• [PATCH v2 07/20] block/xen-blkfront: split get_grant in 2   Julien Grall
• [PATCH v2 08/20] net/xen-netback: xenvif_gop_frag_copy: move GSO check out of the loop   Julien Grall
• [PATCH v2 09/20] xen/biomerge: Don't allow biovec to be merge when Linux is not using 4KB page   Julien Grall
• [PATCH v2 10/20] xen/xenbus: Use Xen page definition   Julien Grall
• [PATCH v2 11/20] tty/hvc: xen: Use xen page definition   Julien Grall
• [PATCH v2 12/20] xen/balloon: Don't rely on the page granularity is the same for Xen and Linux   Julien Grall
• [PATCH v2 13/20] xen/events: fifo: Make it running on 64KB granularity   Julien Grall
• [PATCH v2 14/20] xen/grant-table: Make it running on 64KB granularity   Julien Grall
• [PATCH v2 15/20] block/xen-blkfront: Make it running on 64KB page granularity   Julien Grall
• [PATCH v2 16/20] block/xen-blkback: Make it running on 64KB page granularity   Julien Grall
• [PATCH v2 17/20] net/xen-netfront: Make it running on 64KB page granularity   Julien Grall
• [PATCH v2 18/20] net/xen-netback: Make it running on 64KB page granularity   Julien Grall
• [PATCH v2 19/20] xen/privcmd: Add support for Linux 64KB page granularity   Julien Grall
• [PATCH v2 20/20] arm/xen: Add support for 64KB page granularity   Julien Grall
• [PATCH v2 19/20] xen/privcmd: Add support for Linux 64KB page granularity   Julien Grall
• [PATCH v2 19/20] xen/privcmd: Add support for Linux 64KB page granularity   Julien Grall
• [Xen-devel] [PATCH v2 09/20] xen/biomerge: Don't allow biovec to be merge when Linux is not using 4KB page   Julien Grall
• [PATCH v2 01/20] xen: Add Xen specific page definition   Julien Grall
• [Xen-devel] [PATCH v2 02/20] xen: Introduce a function to split a Linux page into Xen page   Julien Grall
• [PATCH v2 03/20] xen/grant: Introduce helpers to split a page into grant   Julien Grall
• [Xen-devel] [PATCH v2 04/20] xen/grant: Add helper gnttab_page_grant_foreign_access_ref   Julien Grall
• [Xen-devel] [PATCH v2 09/20] xen/biomerge: Don't allow biovec to be merge when Linux is not using 4KB page   Julien Grall
• [Xen-devel] [PATCH v2 13/20] xen/events: fifo: Make it running on 64KB granularity   Julien Grall
• [Xen-devel] [PATCH v2 14/20] xen/grant-table: Make it running on 64KB granularity   Julien Grall
• [Xen-devel] [PATCH v2 19/20] xen/privcmd: Add support for Linux 64KB page granularity   Julien Grall
• [Xen-devel] [PATCH v2 03/20] xen/grant: Introduce helpers to split a page into grant   Julien Grall
• [PATCH v2 12/20] xen/balloon: Don't rely on the page granularity is the same for Xen and Linux   Julien Grall
• [Xen-devel] [PATCH v2 09/20] xen/biomerge: Don't allow biovec to be merge when Linux is not using 4KB page   Julien Grall
• [Xen-devel] [PATCH v2 09/20] xen/biomerge: Don't allow biovec to be merge when Linux is not using 4KB page   Julien Grall
• [Xen-devel] [PATCH v2 17/20] net/xen-netfront: Make it running on 64KB page granularity   Julien Grall
• [Xen-devel] [PATCH v2 00/20] xen/arm64: Add support for 64KB page   Julien Grall
• [Xen-devel] [PATCH v2 05/20] block/xen-blkfront: Split blkif_queue_request in 2   Julien Grall
• [Xen-devel] [PATCH v2 06/20] block/xen-blkfront: Store a page rather a pfn in the grant structure   Julien Grall
• [Xen-devel] [PATCH v2 07/20] block/xen-blkfront: split get_grant in 2   Julien Grall
• [Xen-devel] [PATCH v2 15/20] block/xen-blkfront: Make it running on 64KB page granularity   Julien Grall
• [PATCH v2 06/20] block/xen-blkfront: Store a page rather a pfn in the grant structure   Julien Grall
• [Xen-devel] [PATCH v2 01/20] xen: Add Xen specific page definition   Julien Grall
• [Xen-devel] [PATCH v2 01/20] xen: Add Xen specific page definition   Julien Grall
• [Xen-devel] [PATCH v2 02/20] xen: Introduce a function to split a Linux page into Xen page   Julien Grall
• [Xen-devel] [PATCH v2 02/20] xen: Introduce a function to split a Linux page into Xen page   Julien Grall
• [Xen-devel] [PATCH v2 01/20] xen: Add Xen specific page definition   Julien Grall
• [PATCH] arm/xen: Drop the definition of xen_pci_platform_unplug   Julien Grall
• [PATCH] xen/events: Support event channel rebind on ARM   Julien Grall
• [PATCH v2] xen/events: Support event channel rebind on ARM   Julien Grall
• [Xen-devel] [PATCH v2] xen/events: Support event channel rebind on ARM   Julien Grall
• [PATCH v3] xen/events: Support event channel rebind on ARM   Julien Grall
• [PATCH 0/8] Use correctly the Xen memory terminologies in Linux   Julien Grall
• [PATCH 1/8] arm/xen: Remove helpers which are PV specific   Julien Grall
• [PATCH 2/8] xen: Make clear that swiotlb and biomerge are dealing with DMA address   Julien Grall
• [PATCH 3/8] arm/xen: implement correctly pfn_to_mfn   Julien Grall
• [PATCH 4/8] xen: Use the correctly the Xen memory terminologies   Julien Grall
• [PATCH 8/8] xen/privcmd: Further s/MFN/GFN/ clean-up   Julien Grall
• [Xen-devel] [PATCH 2/8] xen: Make clear that swiotlb and biomerge are dealing with DMA address   Julien Grall
• [PATCH 0/8] Use correctly the Xen memory terminologies in Linux   Julien Grall
• [Xen-devel] [PATCH 4/8] xen: Use the correctly the Xen memory terminologies   Julien Grall
• [PATCH 4/8] xen: Use the correctly the Xen memory terminologies   Julien Grall
• [Xen-devel] [PATCH 4/8] xen: Use the correctly the Xen memory terminologies   Julien Grall
• [Xen-devel] [PATCH 4/8] xen: Use the correctly the Xen memory terminologies   Julien Grall
• [PATCH 4/8] xen: Use the correctly the Xen memory terminologies   Julien Grall
• [PATCH 5/5] irqchip: GIC: Switch ACPI support to stacked domains   Graeme Gregory
• [PATCH 0/5] Making the generic ACPI GSI layer irqdomain aware   Graeme Gregory
• [PATCH 0/7] Add support for FDMA DMA controller found on STi chipsets   Peter Griffin
• [PATCH 1/7] dmaengine: st_fdma: Add STMicroelectronics FDMA DT binding documentation   Peter Griffin
• [PATCH 2/7] dmaengine: st_fdma: Add STMicroelectronics FDMA xbar DT binding documentation   Peter Griffin
• [PATCH 3/7] dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support   Peter Griffin
• [PATCH 4/7] dmaengine: st_fdma: Add xbar support   Peter Griffin
• [PATCH 5/7] ARM: STi: DT: STiH407: Add FDMA driver and xbar driver dt nodes.   Peter Griffin
• [PATCH 6/7] MAINTAINERS: Add FDMA driver files to STi section.   Peter Griffin
• [PATCH 7/7] ARM: multi_v7_defconfig: Enable STi FDMA driver   Peter Griffin
• [PATCH 11/12] [media] tsin: c8sectpfe: Add Kconfig and Makefile for the driver.   Peter Griffin
• [PATCH 11/12] [media] tsin: c8sectpfe: Add Kconfig and Makefile for the driver.   Peter Griffin
• [PATCH 09/12] [media] tsin: c8sectpfe: Add support for various ST NIM cards.   Peter Griffin
• [PATCH 02/12] [media] dvb-pll: Add support for THOMSON DTT7546X tuner.   Peter Griffin
• [PATCH 02/12] [media] dvb-pll: Add support for THOMSON DTT7546X tuner.   Peter Griffin
• [PATCH 07/12] [media] tsin: c8sectpfe: STiH407/10 Linux DVB demux support   Peter Griffin
• [PATCH 02/12] [media] dvb-pll: Add support for THOMSON DTT7546X tuner.   Peter Griffin
• [PATCH 02/12] [media] dvb-pll: Add support for THOMSON DTT7546X tuner.   Peter Griffin
• [PATCH v2 00/11] Add c8sectpfe LinuxDVB demux driver   Peter Griffin
• [PATCH v2 01/11] [media] stv0367: Refine i2c error trace to include i2c address   Peter Griffin
• [PATCH v2 02/11] [media] stv0367: Add support for 16Mhz reference clock   Peter Griffin
• [PATCH v2 03/11] dvb-pll: Convert struct dvb_pll_desc uses to const.   Peter Griffin
• [PATCH v2 04/11] [media] c8sectpfe: Add DT bindings documentation for c8sectpfe driver.   Peter Griffin
• [PATCH v2 05/11] ARM: DT: STi: STiH407: Add c8sectpfe LinuxDVB DT node.   Peter Griffin
• [PATCH v2 06/11] [media] c8sectpfe: STiH407/10 Linux DVB demux support   Peter Griffin
• [PATCH v2 07/11] [media] c8sectpfe: Add LDVB helper functions.   Peter Griffin
• [PATCH v2 08/11] [media] c8sectpfe: Add support for various ST NIM cards.   Peter Griffin
• [PATCH v2 09/11] [media] c8sectpfe: Add c8sectpfe debugfs support.   Peter Griffin
• [PATCH v2 10/11] [media] c8sectpfe: Add Kconfig and Makefile for the driver.   Peter Griffin
• [PATCH v2 11/11] MAINTAINERS: Add c8sectpfe driver directory to STi section   Peter Griffin
• [PATCH] ARM: pxa: fix dm9000 platform data regression   Igor Grinberg
• [PATCH 1/2] ARM: dts: Add support for phyCORE-AM335x SoM   Igor Grinberg
• [PATCH] drivers: qcom: Select QCOM_SCM unconditionally for QCOM_PM   Andy Gross
• [PATCH] firmware: qcom: scm: Convert to platform driver   Andy Gross
• [PATCH] drivers: qcom: Select QCOM_SCM unconditionally for QCOM_PM   Andy Gross
• [PATCH v2 08/11] ARM: dts: msm8974: Add tcsr mutex node   Andy Gross
• [PATCH v2 09/11] ARM: dts: msm8974: Add smem reservation and node   Andy Gross
• [PATCH 3/3] ARM: dts: qcom: Replace gpio node with pinctrl node   Andy Gross
• [PATCH 1/5] ARM: dts: qcom: Replace gpio node with pinctrl node   Andy Gross
• [PATCH 5/5] ARM: qcom_defconfig: Enable options for KS8851 ethernet   Andy Gross
• [PATCH 3/5] ARM: dts: qcom: Add MSM8960 CDP RPM regulators   Andy Gross
• [PATCH 2/5] ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodes   Andy Gross
• [PATCH 4/5] ARM: dts: qcom: Add ks8851 node for wired ethernet   Andy Gross
• [PATCH v1 0/7] APQ8064 dt patches.   Andy Gross
• [PATCH v1 2/7] ARM: dts: ifc6410: add real regulators for sdcc nodes.   Andy Gross
• [PATCH v1 3/7] ARM: dts: qs600: Add real regulators to sdcc   Andy Gross
• [PATCH v1 4/7] ARM: dts: apq8064: Add pm8921 mfd and its gpio node   Andy Gross
• [PATCH v1 5/7] ARM: dts: apq8064: add pm8921 mpp support   Andy Gross
• [PATCH v1 7/7] ARM: dts: apq8064: fix missing gsbi cell-index   Andy Gross
• [PATCH v1 6/7] ARM: dts: apq8064: Add DT support for GSBI6 and for UART pin mux   Andy Gross
• [PATCH v2 1/3] ARM: dts: apq8064: remove temporary fixed regulator for mmc   Andy Gross
• [PATCH v2 2/3] ARM: dts: ifc6410: add real regulators for sdcc nodes.   Andy Gross
• [PATCH v2 3/3] ARM: dts: qs600: Add real regulators to sdcc   Andy Gross
• [PATCH v1 0/7] DT: APQ8064 for qcom-dt-next   Andy Gross
• [GIT PULL] qcom SoC changes for 4.3   Andy Gross
• [GIT PULL] qcom dt changes for 4.3   Andy Gross
• [GIT PULL] qcom defconfig changes for 4.3   Andy Gross
• [GIT PULL] qcom arm64 dt changes for 4.3   Andy Gross
• [GIT PULL] qcom SoC changes for 4.3   Andy Gross
• [GIT PULL] qcom SoC changes for 4.3 *CORRECTED*   Andy Gross
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Guenter
• Build error due to "x86/fpu, sched: Dynamically allocate 'struct fpu'"   Guenter
• [PATCH v2 0/4] Allow to use leds-ns2 with n090401 boards   Simon Guinot
• [PATCH v2 1/4] leds: leds-ns2: move LED modes mapping outside of the driver   Simon Guinot
• [PATCH v2 2/4] ARM: Kirkwood: add modes-map property to ns2-leds nodes   Simon Guinot
• [PATCH v2 3/4] leds: leds-ns2: handle can_sleep GPIOs   Simon Guinot
• [PATCH v2 4/4] leds: leds-ns2: depends on MACH_ARMADA_370   Simon Guinot
• [PATCH] net: mvneta: fix refilling for Rx DMA buffers   Simon Guinot
• [PATCH] net: mvneta: fix refilling for Rx DMA buffers   Simon Guinot
• [PATCH v2] net: mvneta: fix refilling for Rx DMA buffers   Simon Guinot
• [PATCH v4 3/5] tee: generic TEE subsystem   Jason Gunthorpe
• [PATCH v4 3/5] tee: generic TEE subsystem   Jason Gunthorpe
• [PATCH v4 3/5] tee: generic TEE subsystem   Jason Gunthorpe
• [PATCH v4 3/5] tee: generic TEE subsystem   Jason Gunthorpe
• [PATCH] ARM64 / SMP: Switch pr_err() to pr_debug() for disabled GICC entry   Hanjun Guo
• [PATCH] ARM64 / SMP: Switch pr_err() to pr_debug() for disabled GICC entry   Hanjun Guo
• [PATCH] ARM64 / SMP: Switch pr_err() to pr_debug() for disabled GICC entry   Hanjun Guo
• [PATCH v3 1/3] ACPI : introduce macros for using the ACPI specification version   Hanjun Guo
• [PATCH v3 1/3] ACPI : introduce macros for using the ACPI specification version   Hanjun Guo
• [PATCH v2] ARM64 / SMP: Switch pr_err() to pr_debug() for disabled GICC entry   Hanjun Guo
• [PATCH v2 6/9] irqchip / gic: Add stacked irqdomain support for ACPI based GICv2 init   Hanjun Guo
• [PATCH v2 6/9] irqchip / gic: Add stacked irqdomain support for ACPI based GICv2 init   Hanjun Guo
• [PATCH v3 0/8] Add self-probe infrastructure and stacked irqdomain support for ACPI based GICv2/3 init   Hanjun Guo
• [PATCH v3 1/8] irqchip / GIC: Add GIC version support in ACPI MADT   Hanjun Guo
• [PATCH v3 2/8] ACPI / irqchip: Add self-probe infrastructure to initialize IRQ controller   Hanjun Guo
• [PATCH v3 3/8] irqchip / GIC / ACPI: Use IRQCHIP_ACPI_DECLARE to simplify GICv2 init code   Hanjun Guo
• [PATCH v3 4/8] irqchip / gic: Add stacked irqdomain support for ACPI based GICv2 init   Hanjun Guo
• [PATCH v3 5/8] irqchip / GICv3: Refactor gic_of_init() for GICv3 driver   Hanjun Guo
• [PATCH v3 6/8] irqchip / GICv3: Add ACPI support for GICv3+ initialization   Hanjun Guo
• [PATCH v3 7/8] irqchip / GICv3: Add stacked irqdomain support for ACPI based init   Hanjun Guo
• [PATCH v3 8/8] irqchip / gicv3 / ACPI: Add GICR support via GICC structures   Hanjun Guo
• ACPI: regression: Failed to initialize GIC IRQ controller   Hanjun Guo
• ACPI: regression: Failed to initialize GIC IRQ controller   Hanjun Guo
• [PATCH] ARM64: kernel: implement ACPI parking protocol   Hanjun Guo
• [Linaro-acpi] [PATCH v3 0/8] Add self-probe infrastructure and stacked irqdomain support for ACPI based GICv2/3 init   Hanjun Guo
• [PATCH v3 2/8] ACPI / irqchip: Add self-probe infrastructure to initialize IRQ controller   Hanjun Guo
• [PATCH v3 2/8] ACPI / irqchip: Add self-probe infrastructure to initialize IRQ controller   Hanjun Guo
• [PATCH 0/5] Making the generic ACPI GSI layer irqdomain aware   Hanjun Guo
• [PATCH 1/5] genirq: irqdomain: Use an accessor for the of_node field   Hanjun Guo
• [PATCH 2/5] genirq: irqdomain: Remove irqdomain dependency on struct device_node   Hanjun Guo
• [PATCH 5/5] irqchip: GIC: Switch ACPI support to stacked domains   Hanjun Guo
• [PATCH 5/5] irqchip: GIC: Switch ACPI support to stacked domains   Hanjun Guo
• [PATCH 5/5] irqchip: GIC: Switch ACPI support to stacked domains   Hanjun Guo
• [PATCH v2 0/7] Making the generic ACPI GSI layer irqdomain aware   Hanjun Guo
• [PATCH v2 4/7] acpi: gsi: Always perform an irq domain lookup   Hanjun Guo
• [PATCH v2 1/7] genirq: irqdomain: Use an accessor for the of_node field   Hanjun Guo
• [PATCH v2 2/7] genirq: irqdomain: Remove irqdomain dependency on struct device_node   Hanjun Guo
• [PATCH v2 3/7] genirq: irqdomain: Add irq_create_acpi_mapping   Hanjun Guo
• [PATCH v2 5/7] acpi: gsi: Add acpi_set_irq_model to initialize the GSI layer   Hanjun Guo
• [PATCH v2 6/7] irqchip: GIC: Switch ACPI support to stacked domains   Hanjun Guo
• [PATCH v2 7/7] acpi: gsi: Cleanup acpi_register_gsi   Hanjun Guo
• [PATCH v2 5/7] acpi: gsi: Add acpi_set_irq_model to initialize the GSI layer   Hanjun Guo
• [PATCH v5 01/19] genirq: irqdomain: Allow irq domain aliasing   Hanjun Guo
• [PATCH v5 02/19] PCI: MSI: Register irq domain with specific token   Hanjun Guo
• [PATCH v5 03/19] device core: Introduce per-device MSI domain pointer   Hanjun Guo
• [PATCH v5 04/19] PCI/MSI: Add hooks to populate the msi_domain field   Hanjun Guo
• [PATCH v5 07/19] PCI/MSI: Let pci_msi_get_domain use struct device's msi_domain   Hanjun Guo
• [PATCH v4 00/10] ACPI GIC Self-probing, GICv2m and GICv3 support   Hanjun Guo
• [PATCH v4 01/10] irqchip / GIC: Add GIC version support in ACPI MADT   Hanjun Guo
• [PATCH v4 02/10] ACPI / irqchip: Add self-probe infrastructure to initialize IRQ controller   Hanjun Guo
• [PATCH v4 03/10] irqchip / GIC / ACPI: Use IRQCHIP_ACPI_DECLARE to simplify GICv2 init code   Hanjun Guo
• [PATCH v4 04/10] irqchip / GICv3: Refactor gic_of_init() for GICv3 driver   Hanjun Guo
• [PATCH v4 05/10] irqchip / GICv3: remove the useless comparision of device node in xlate   Hanjun Guo
• [PATCH v4 06/10] irqchip / GICv3: Add ACPI support for GICv3+ initialization   Hanjun Guo
• [PATCH v4 07/10] irqchip / GICv3 / ACPI: Add GICR support via GICC structures   Hanjun Guo
• [PATCH v4 08/10] ACPI: GIC: Add ACPI helper functions to query irq-domain tokens for for GIC MSI and ITS   Hanjun Guo
• [PATCH v4 09/10] PCI: ACPI: Bind GIC MSI frame to PCI host bridge   Hanjun Guo
• [PATCH v4 10/10] irqchip / gicv2m: Introducing gicv2m_acpi_init()   Hanjun Guo
• [Patch v5 0/6] Consolidate ACPI PCI root common code into ACPI core   Hanjun Guo
• [PATCH v2 1/2] watchdog: imx2_wdt: add external reset support via 'ext-reset-output' dt prop   Shawn Guo
• [PATCH 2/6] mmc: sdhci-esdhc-imx: add tuning-step seting support   Shawn Guo
• [PATCH 2/6] mmc: sdhci-esdhc-imx: add tuning-step seting support   Shawn Guo
• [PATCH] ARM: dts: vf610: Nomenclature fixup for PTA6 pin used in RMII mode.   Shawn Guo
• [PATCH] ARM: dts: vf610: Extend I2C support to all available buses.   Shawn Guo
• [PATCH] ARM: imx_v6_v7_defconfig: Enable kexec support   Shawn Guo
• [PATCH] ARM: dts: imx6qdl-sabreauto: Add HDMI support   Shawn Guo
• [PATCH v6 4/6] ARM: vf610: enable NAND Flash Controller   Shawn Guo
• [PATCH] ARM: dts: imx53-qsb: fix TVE entry   Shawn Guo
• [PATCH] ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set   Shawn Guo
• [PATCH v6 4/6] ARM: vf610: enable NAND Flash Controller   Shawn Guo
• [PATCH] ARM: dts: vf610: Nomenclature fixup for PTA6 pin used in RMII mode.   Shawn Guo
• [PATCH 1/8] ARM: imx: add i.mx6ul msl support   Shawn Guo
• [PATCH 3/8] Document: dt: binding: imx: update document for imx6ul support   Shawn Guo
• [PATCH 4/8] ARM: pinctrl: imx: add i.mx6ul pinctrl driver   Shawn Guo
• [PATCH 5/8] ARM: dts: add i.mx6ul pin function include file   Shawn Guo
• [PATCH 6/8] ARM: dts: imx: add imx6ul and imx6ul evk board support   Shawn Guo
• [PATCH 4/6] mmc: sdhci-esdhc-imx: remove duplicated dts parsing   Shawn Guo
• [PATCH 0/6] mmc: sdhci-esdhci-imx: fix cd/wp regression   Shawn Guo
• [PATCH] ARM: dts: imx6qdl-sabreauto: Add audio support   Shawn Guo
• [PATCH] ARM: imx_v6_v7_defconfig: build in audio driver   Shawn Guo
• [PATCH 0/6] mmc: sdhci-esdhci-imx: fix cd/wp regression   Shawn Guo
• [PATCH v2 6/8] ARM: dts: imx: add imx6ul and imx6ul evk board support   Shawn Guo
• [PATCH v4 5/7] dt-binding: document the binding for mxc rtc   Shawn Guo
• [PATCH v4 6/7] imx27: dt: add support of internal rtc   Shawn Guo
• [PATCH v2 0/2] Implement sample time consideration for Vybrid's ADC   Shawn Guo
• [PATCH v2 2/2] ARM: dts: vfxxx: Add property for minimum sample time   Shawn Guo
• [PATCH] dts: ls1021a: Add dts nodes for eTSEC0, eTSEC1 and eTSEC2   Shawn Guo
• [PATCH v2 01/13] ARM: kill off set_irq_flags usage   Shawn Guo
• [PATCH] rtc: snvs: select option REGMAP_MMIO   Shawn Guo
• [PATCH v3 1/2] ARM: dts: imx6qdl-sabresd: Allow HDMI and LVDS to work simultaneously   Shawn Guo
• [PATCH] dts: ls1021a: Add dts nodes for eTSEC0, eTSEC1 and eTSEC2   Shawn Guo
• [PATCH 1/2] ARM: dts: imx6sl-warp: Add changes for rev1.12   Shawn Guo
• [PATCH 2/2] ARM: imx_v6_v7_defconfig: Select HCIUART_H4   Shawn Guo
• [PATCH 1/3] ARM: dts: imx6qdl-sabrelite: Allow HDMI and LVDS to work simultaneously   Shawn Guo
• [PATCH v3 1/1] ARM: dts: imx7d: add cortex-a7 coresight component   Shawn Guo
• [PATCH] dts: ls1021a: audio: Add dts nodes for audio on LS1021A   Shawn Guo
• [PATCH] ARM: dts: vf-colibri: define stdout-path property   Shawn Guo
• [PATCH] ARM: ls1021a: dtsi: Add crypto node alias in device tree   Shawn Guo
• [PATCH v3 1/7] ARM: imx: add i.mx6ul msl support   Shawn Guo
• [PATCH] arm:irqchip: IRQCHIP_DECLARE macro is now accessible   Shawn Guo
• [PATCH v2] ARM: dts: imx6qdl-sabreauto: Allow HDMI and LVDS to work simultaneously   Shawn Guo
• [PATCH v2 5/8] ARM: dts: add i.mx6ul pin function include file   Shawn Guo
• [PATCH] arm: dts: ls1021a: add wakeup device ftm0 node for ls1021a   Shawn Guo
• [PATCH] arm: dts: ls1021a: Update 'dspi' device node compatible string   Shawn Guo
• [PATCH v1 0/7] fsl-quadspi: Allow additional device combinations.   Shawn Guo
• [PATCH 1/1] ARM: dts: vfxxx: Include support for esdhc0 functionality.   Shawn Guo
• [PATCH v4] ARM: dts: imx6qdl-sabreauto: Allow HDMI and LVDS to work simultaneously   Shawn Guo
• [PATCH 1/2] ARM: dts: imx7d: enable snvs rtc, onoffkey and power off   Shawn Guo
• [PATCH 2/2] ARM: imx_v6_v7_defconfig: enable powerkey and syscon power off   Shawn Guo
• [PATCH][v2] ARM: ls1021a: dtsi: Add crypto node alias in device tree   Shawn Guo
• [PATCH v4 0/7] add basic support for i.mx6 ul chip   Shawn Guo
• [PATCH][v2] ARM: ls1021a: dtsi: Add crypto node alias in device tree   Shawn Guo
• [GIT PULL] ARM: imx: fixes for 4.2   Shawn Guo
• [PATCH v3 2/2] ARM: dts: vf-colibri: Add property for minimum sample time   Shawn Guo
• [PATCH] input: snvs_pwrkey: add linux prefix for wakeup property   Shawn Guo
• [PATCH][v3] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Shawn Guo
• [PATCH][v3] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Shawn Guo
• [PATCH] ARM: dts: vf-colibri: define stdout-path property   Shawn Guo
• [PATCH][v3] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Shawn Guo
• [PATCH][v3] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Shawn Guo
• [PATCH] input: snvs_pwrkey: add linux prefix for wakeup property   Shawn Guo
• [PATCH 1/4][v4] ARM: imx: imx7d-pinfunc: add gpio pad iomuxc settings   Shawn Guo
• [PATCH v2] input: snvs_pwrkey: use "wakeup-source" as deivce tree property name   Shawn Guo
• [PATCH V2 00/11] mmc: sdhci-esdhci-imx: fix cd/wp regression   Shawn Guo
• [PATCH v12 4/6] arm/dts/ls1021a: Add DCU dts node   Shawn Guo
• [PATCH v7 4/5] ARM: dts: vf610twr: add NAND flash controller peripherial   Shawn Guo
• [PATCH v2] ARM: dts: i.MX35: Fix can support.   Shawn Guo
• [PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D   Shawn Guo
• [PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shawn Guo
• [PATCH v5 0/6] add device tree support for mxc rtc   Shawn Guo
• [PATCH v5 4/6] dt-binding: document the binding for mxc rtc   Shawn Guo
• [PATCH 5/5] ARM: dts: imx6ul-14x14-evk.dts: add tsc support   Shawn Guo
• [PATCH v2] dts: ls1021a: Add dts nodes for eTSEC0, eTSEC1 and eTSEC2   Shawn Guo
• [PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shawn Guo
• [PATCH] ARM: imx_v6_v7_defconfig: Select CONFIG_IKCONFIG_PROC   Shawn Guo
• [PATCH] ARM: dts: sabresd: use simple-panel instead of display-timings for LVDS1   Shawn Guo
• [PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shawn Guo
• [PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D   Shawn Guo
• [PATCH v8 3/5] mtd: nand: vf610_nfc: add device tree bindings   Shawn Guo
• [PATCH v8 0/5] mtd: nand: vf610_nfc: Freescale NFC for VF610   Shawn Guo
• [PATCH v7 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shawn Guo
• [PATCH v2] ARM: dts: ls1021a: add wakeup device ftm0 node for ls1021a   Shawn Guo
• [PATCH v2] ARM: dts: ls1021a: audio: Add dts nodes for audio on LS1021A   Shawn Guo
• [PATCH v2 1/4] ARM: dts: vfxxx: Add io-channel-cells property for ADC node   Shawn Guo
• [PATCH v2 2/4] ARM: dts: vf500-colibri: Add device tree node for touchscreen support   Shawn Guo
• [PATCH 1/1] ARM: dts: imx6ul: add usb host and function support   Shawn Guo
• [PATCH v1 2/4] ARM: imx6ul: add fec MAC refrence clock and phy fixup init   Shawn Guo
• [PATCH v2 1/2] ARM: dts: imx6ul: fix low case define in imx6ul-pinfunc.h   Shawn Guo
• [GIT PULL] ARM: imx: fixes for 4.2, 2nd round   Shawn Guo
• [PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D   Shawn Guo
• [PATCH v7 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shawn Guo
• [PATCH V3] trace/events: add chip name and hwirq to irq entry tracepoint   Ankit Gupta
• [PATCH V4] trace/events: add chip name and hwirq to irq entry tracepoint   Ankit Gupta
• [PATCH] ARM: ls1021a: dtsi: Add crypto node alias in device tree   Ruchika Gupta
• [PATCH][v2] ARM: ls1021a: dtsi: Add crypto node alias in device tree   Ruchika Gupta
• [PATCH 01/41] clocksource: asm9260: Migrate to new 'set-state' interface   Vineet Gupta
• [PATCH 01/41] clocksource: asm9260: Migrate to new 'set-state' interface   Vineet Gupta
• [PATCH v2] arm: configs: Add Freescale LS1021A defconfig   Wang Haikun
• [PATCH v2] arm: configs: Add Freescale LS1021A defconfig   Wang Haikun
• [PATCH v2] arm: configs: Add Freescale LS1021A defconfig   Wang Haikun
• [RFC Patch V1 08/12] PCI: Use helper functions to access fields in struct msi_desc   Jingoo Han
• [PATCH v2 09/13] PCI: kill off set_irq_flags usage   Jingoo Han
• [PATCH v3] PCI: kill off set_irq_flags usage   Jingoo Han
• [PATCH v3 2/2] ARM: pci: kill pcibios_msi_controller   Jingoo Han
• [PATCH v3 2/2] ARM: pci: kill pcibios_msi_controller   Jingoo Han
• [PATCH v4 2/2] ARM: pci: kill pcibios_msi_controller   Jingoo Han
• [PATCH v4 1/2] ARM: PCI: bios32: replace panic with WARN messages on failures   Jingoo Han
• [PATCH] input: ambakmi: Fix system PM by converting to modern callbacks   Ulf Hansson
• [PATCH] PM / Domains: Try power off masters in error path of __pm_genpd_poweron()   Ulf Hansson
• [PATCH 0/6] mmc: sdhci-esdhci-imx: fix cd/wp regression   Ulf Hansson
• [PATCH v2] mmc: sunxi: Don't start commands while the card is busy   Ulf Hansson
• [PATCH v8 2/2] mmc: host: sdhci: Disable 1.8V signaling for arasan 4.9a version of SDHCI controller.   Ulf Hansson
• [PATCH v3 00/16] ARM: shmobile: Add CPG/MSTP Clock Domain   Ulf Hansson
• [PATCH V2 00/11] mmc: sdhci-esdhci-imx: fix cd/wp regression   Ulf Hansson
• [PATCH] amba: Remove unused callbacks for legacy system PM   Ulf Hansson
• [PATCH] thermal: consistently use int for temperatures   Darren Hart
• [PATCH v2 1/2] watchdog: imx2_wdt: add external reset support via 'ext-reset-output' dt prop   Tim Harvey
• [PATCH v2] imx: thermal: use CPU temperature grade info for thresholds   Tim Harvey
• [PATCH v3 0/2] imx6: Implement external watchdog reset   Tim Harvey
• [PATCH v3 1/2] watchdog: imx2_wdt: add external reset support via 'ext-reset-output' dt prop   Tim Harvey
• [PATCH v3 2/2] ARM: dts: ventana: Add ext-reset support   Tim Harvey
• [PATCH] thermal: consistently use int for temperatures   Sascha Hauer
• Mediatek MT8135 dts updates   Sascha Hauer
• [PATCH 1/4] ARM: dts: mediatek: Enable clock support for Mediatek MT8135.   Sascha Hauer
• [PATCH 2/4] ARM: dts: mt8135: Add pmic wrapper nodes   Sascha Hauer
• [PATCH 3/4] ARM: dts: mt8135-evbp1: Add PMIC support   Sascha Hauer
• [PATCH 4/4] ARM: dts: mediatek mt8135: Use real UART clocks   Sascha Hauer
• [PATCH] arm64: dts: mt8173: add clock_null   Sascha Hauer
• [PATCH] arm64: dts: mt8173: add clock_null   Sascha Hauer
• [PATCH] arm64: dts: mt8173: add clock_null   Sascha Hauer
• [PATCH v2 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs   Sascha Hauer
• [PATCH v2 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs   Sascha Hauer
• [PATCH] soc: mediatek: Drop owner assignment from platform_driver   Sascha Hauer
• [PATCH v3 0/3] Fixes for MT8173 PLLs   Sascha Hauer
• [PATCH] thermal: Add Mediatek thermal support   Sascha Hauer
• [PATCH 1/3] dt-bindings: thermal: Add binding document for Mediatek thermal controller   Sascha Hauer
• [PATCH 2/3] thermal: Add Mediatek thermal controller support   Sascha Hauer
• [PATCH 3/3] ARM64: dts: mt8173: Add thermal/auxadc device nodes   Sascha Hauer
• [RESEND PATCH 1/2] pinctrl: change function behavior for per pin muxing controllers   Sascha Hauer
• [RESEND PATCH 2/2] pinctrl: introduce complex pin description   Sascha Hauer
• [RESEND PATCH 1/2] pinctrl: change function behavior for per pin muxing controllers   Sascha Hauer
• [PATCH v2 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs   Sascha Hauer
• [RESEND PATCH 2/2] pinctrl: introduce complex pin description   Sascha Hauer
• [PATCH] ARM64: dts: Mediatek: mt8173-evb: fix MMC, add to USB power domain   Sascha Hauer
• [PATCH v2] thermal: consistently use int for temperatures   Sascha Hauer
• [PATCH] thermal: consistently use int for temperatures   Sascha Hauer
• [PATCH v2] Add Mediatek thermal support   Sascha Hauer
• [PATCH 1/3] dt-bindings: thermal: Add binding document for Mediatek thermal controller   Sascha Hauer
• [PATCH 2/3] thermal: Add Mediatek thermal controller support   Sascha Hauer
• [PATCH 3/3] ARM64: dts: mt8173: Add thermal/auxadc device nodes   Sascha Hauer
• [PATCH v2] thermal: consistently use int for temperatures   Sascha Hauer
• [RESEND PATCH 2/6] soc: Mediatek: Add SCPSYS CPU power domain driver   Sascha Hauer
• [PATCH v3] thermal: consistently use int for temperatures   Sascha Hauer
• [PATCH v2] thermal: consistently use int for temperatures   Sascha Hauer
• [PATCH v4 2/7] clk: mediatek: Fix rate and dependency of MT8173 clocks   Sascha Hauer
• [PATCH 02/10] usb: chipidea: define stream mode disable for both roles   Sascha Hauer
• [PATCH 02/10] usb: chipidea: define stream mode disable for both roles   Sascha Hauer
• [PATCH] soc: mediatek: Fix SCPSYS compilation   Sascha Hauer
• [PATCH 02/18] ARM/cns3xxx/timer: Migrate to new 'set-state' interface   Krzysztof Hałasa
• [PATCH 07/18] ARM/ixp4xx/timer: Migrate to new 'set-state' interface   Krzysztof Hałasa
• [PATCH 0/4] phy: berlin-usb: PLL divider fixes   Thomas Hebb
• [PATCH 1/4] phy: berlin-usb: fix divider for BG2CD   Thomas Hebb
• [PATCH 2/4] ARM: dts: berlin: change BG2Q's USB PHY compatible   Thomas Hebb
• [PATCH 3/4] phy: berlin-usb: fix divider for BG2   Thomas Hebb
• [PATCH 4/4] phy: berlin-usb: rename table copied from SATA PHY   Thomas Hebb
• [PATCH 1/4] phy: berlin-usb: fix divider for BG2CD   Thomas Hebb
• [PATCH 4/4] phy: berlin-usb: rename table copied from SATA PHY   Thomas Hebb
• [PATCH] ARM: imx6: Fix "BUG: scheduling while atomic" if PCIe switch is attached   Bjorn Helgaas
• [PATCH] ARM: imx6: Fix non-working MSI interrupts if PCIe switch is attached   Bjorn Helgaas
• [PATCH] PCI-iproc: Delete unnecessary checks before two function calls   Bjorn Helgaas
• [PATCH] PCI-iproc: Delete unnecessary checks before two function calls   Bjorn Helgaas
• [PATCH] PCI: xilinx: Add check for MSI interrupt flag before handling as INTx   Bjorn Helgaas
• [PATCH] pci: Drop owner assignment from platform_driver   Bjorn Helgaas
• [PATCH v1] ARM: pci: add call to pcie_bus_configure_settings()   Bjorn Helgaas
• [RFC Patch V1 00/12] Reorganize struct msi_desc to prepare for support of generic MSI   Bjorn Helgaas
• [PATCH] PCI: xilinx: Add check for MSI interrupt flag before handling as INTx   Bjorn Helgaas
• [PATCH v3 0/2] pci: xgene: Add multiple memory ranges support   Bjorn Helgaas
• [PATCH v3 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Bjorn Helgaas
• [PATCH v4 07/19] PCI/MSI: Let pci_msi_get_domain use struct device's msi_domain   Bjorn Helgaas
• [PATCH v4 04/19] PCI/MSI: Add hooks to populate the msi_domain field   Bjorn Helgaas
• [PATCH v4 04/19] PCI/MSI: Add hooks to populate the msi_domain field   Bjorn Helgaas
• [PATCH v4 05/19] PCI/MSI: of: Add support for OF-provided msi_domain   Bjorn Helgaas
• [PATCH v4 19/19] PCI/MSI: Drop domain field from msi_controller   Bjorn Helgaas
• [PATCH v3 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Bjorn Helgaas
• [PATCH v4 3/5] PCI: hisi: Add PCIe host support for Hisilicon Soc Hip05   Bjorn Helgaas
• [PATCH v4 1/5] ARM/PCI: remove align_resource in pci_sys_data   Bjorn Helgaas
• [PATCH v4 4/5] Documentation: DT: Add Hisilicon PCIe host binding   Bjorn Helgaas
• [PATCH v4 04/19] PCI/MSI: Add hooks to populate the msi_domain field   Bjorn Helgaas
• [PATCH v4 04/19] PCI/MSI: Add hooks to populate the msi_domain field   Bjorn Helgaas
• [PATCH v4 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Bjorn Helgaas
• [PATCH v4 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Bjorn Helgaas
• [PATCH v5 02/19] PCI: MSI: Register irq domain with specific token   Bjorn Helgaas
• [PATCH v5 04/19] PCI/MSI: Add hooks to populate the msi_domain field   Bjorn Helgaas
• [PATCH v5 05/19] PCI/MSI: of: Add support for OF-provided msi_domain   Bjorn Helgaas
• [PATCH v5 06/19] PCI/MSI: of: Allow msi_domain lookup using the host bridge node   Bjorn Helgaas
• [PATCH v5 07/19] PCI/MSI: Let pci_msi_get_domain use struct device's msi_domain   Bjorn Helgaas
• [PATCH v5 18/19] PCI/MSI: pci-xgene-msi: Get rid of struct msi_controller   Bjorn Helgaas
• [PATCH v5 00/19] Per-device MSI domain & platform MSI   Bjorn Helgaas
• [PATCH] ARM/PCI: set MPS before pci_bus_add_devices()   Bjorn Helgaas
• [RFT PATCH] ARM: pci: kill pcibios_msi_controller   Bjorn Helgaas
• [PATCH v5 04/19] PCI/MSI: Add hooks to populate the msi_domain field   Bjorn Helgaas
• X-Gene: Unhandled fault: synchronous external abort in pci_generic_config_read32   Bjorn Helgaas
• X-Gene: Unhandled fault: synchronous external abort in pci_generic_config_read32   Bjorn Helgaas
• X-Gene: Unhandled fault: synchronous external abort in pci_generic_config_read32   Bjorn Helgaas
• X-Gene: Unhandled fault: synchronous external abort in pci_generic_config_read32   Bjorn Helgaas
• X-Gene: Unhandled fault: synchronous external abort in pci_generic_config_read32   Bjorn Helgaas
• X-Gene: Unhandled fault: synchronous external abort in pci_generic_config_read32   Bjorn Helgaas
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Bjorn Helgaas
• [Patch v5 4/6] PCI/ACPI: Consolidate common PCI host bridge code into ACPI core   Bjorn Helgaas
• [Patch v5 0/6] Consolidate ACPI PCI root common code into ACPI core   Bjorn Helgaas
• [Patch v5 1/6] ACPI/PCI: Enhance ACPI core to support sparse IO space   Bjorn Helgaas
• [Patch v5 4/6] PCI/ACPI: Consolidate common PCI host bridge code into ACPI core   Bjorn Helgaas
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Bjorn Helgaas
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Bjorn Helgaas
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Bjorn Helgaas
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Bjorn Helgaas
• [PATCH v5 2/6] arch: unify ioremap prototypes and macro aliases   Christoph Hellwig
• [PATCH 08/10] arch: introduce strict_ioremap   Christoph Hellwig
• [PATCH 05/10] arch: unify ioremap prototypes and macro aliases   Christoph Hellwig
• [PATCH v2 08/25] arch: introduce memremap()   Christoph Hellwig
• [PATCH v2 23/25] arch: remove ioremap_cache, replace with arch_memremap   Christoph Hellwig
• [PATCH v2 24/25] arch: remove ioremap_wt, replace with arch_memremap   Christoph Hellwig
• [PATCH v2 25/25] pmem: convert to generic memremap   Christoph Hellwig
• [PATCH v2 08/25] arch: introduce memremap()   Christoph Hellwig
• [PATCH v2 08/25] arch: introduce memremap()   Christoph Hellwig
• [PATCH v2 25/25] pmem: convert to generic memremap   Christoph Hellwig
• [PATCH v2 24/25] arch: remove ioremap_wt, replace with arch_memremap   Christoph Hellwig
• [PATCH v2 08/25] arch: introduce memremap()   Christoph Hellwig
• [3.16.y-ckt stable] Patch "clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier" has been added to staging queue   Luis Henriques
• [PATCH 3.16.y-ckt 116/185] clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier   Luis Henriques
• [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock controllers   Rob Herring
• [PATCH-V5 4/4] mfd: devicetree: bindings: Add new 88pm800 mfd binding   Rob Herring
• [PATCH-V5 4/4] mfd: devicetree: bindings: Add new 88pm800 mfd binding   Rob Herring
• [PATCHv4 4/5] ARM: migrate to common PSCI client code   Rob Herring
• [RFC 1/3] of: make of_mutex public   Rob Herring
• [PATCH v2 4/9] arm: twr-k70f120m: timer driver for Kinetis SoC   Rob Herring
• [RESEND] [PATCH v2 1/2] arm: devtree: Set system_rev from DT revision   Rob Herring
• [RESEND] [PATCH v2 1/2] arm: devtree: Set system_rev from DT revision   Rob Herring
• [RESEND] [PATCH v2 1/2] arm: devtree: Set system_rev from DT revision   Rob Herring
• [PATCH 12/15] SH: kill off set_irq_flags usage   Rob Herring
• [PATCH 3/3] ARM: dts: UniPhier: add USB EHCI device nodes   Rob Herring
• [PATCH v7 4/9] nvmem: Add bindings for simple nvmem framework   Rob Herring
• [PATCH] Store PCIe controllers address in struct of_pci_range   Rob Herring
• [PATCH v4 5/7] dt-binding: document the binding for mxc rtc   Rob Herring
• [PATCH v2 00/13] Kill off set_irq_flags   Rob Herring
• [PATCH v2 01/13] ARM: kill off set_irq_flags usage   Rob Herring
• [PATCH v2 02/13] clk: kill off set_irq_flags usage   Rob Herring
• [PATCH v2 03/13] dma: kill off set_irq_flags usage   Rob Herring
• [PATCH v2 04/13] gpio: kill off set_irq_flags usage   Rob Herring
• [PATCH v2 05/13] gpu/drm: kill off set_irq_flags usage   Rob Herring
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Rob Herring
• [PATCH v2 07/13] memory: kill off set_irq_flags usage   Rob Herring
• [PATCH v2 08/13] mfd: kill off set_irq_flags usage   Rob Herring
• [PATCH v2 09/13] PCI: kill off set_irq_flags usage   Rob Herring
• [PATCH v2 10/13] pinctrl: kill off set_irq_flags usage   Rob Herring
• [PATCH v2 11/13] sh: kill off set_irq_flags usage   Rob Herring
• [PATCH v2 12/13] ARM: remove ununsed set_irq_flags   Rob Herring
• [PATCH v2 13/13] arm64: remove ununsed set_irq_flags   Rob Herring
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Rob Herring
• [PATCH 1/7] dt-bindings: add Marvell PMU documentation   Rob Herring
• next-20150722 build: 2 failures 75 warnings (next-20150722)   Rob Herring
• [PATCH] ARM: config: Switch PXA27x platforms to use PXA RTC driver   Rob Herring
• [PATCH 1/2] of: base: Allow more args than MAX_PHANDLE_ARGS if required   Rob Herring
• [RESEND PATCH v2 1/2] dt: snps, dw-apb-ssi: Document new I/O data register width property   Rob Herring
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Rob Herring
• [PATCH v3] ARM: kill off set_irq_flags usage   Rob Herring
• [PATCH v3] irqchip: kill off set_irq_flags usage   Rob Herring
• [PATCH v3] mfd: kill off set_irq_flags usage   Rob Herring
• [PATCH v3] PCI: kill off set_irq_flags usage   Rob Herring
• [PATCH v3] pinctrl: kill off set_irq_flags usage   Rob Herring
• [PATCH 2/6] arm: mach-socfpga: enable pci support   Rob Herring
• [PATCH v2 04/22] of/platform: add of_platform_device_find()   Rob Herring
• [PATCH v4 2/2] dt: power: st: Provide bindings for ST's OPPs   Rob Herring
• [PATCH v2 04/22] of/platform: add of_platform_device_find()   Rob Herring
• [PATCH v4 2/2] dt: power: st: Provide bindings for ST's OPPs   Rob Herring
• [PATCH 3/6] pci:host: Add Altera PCIe host controller driver   Rob Herring
• [PATCH v2] dtb: Create a common home for cross-architecture dtsi files.   Rob Herring
• [PATCH v2 04/22] of/platform: add of_platform_device_find()   Rob Herring
• [PATCH] arm64: override early_init_dt_add_memory_arch()   Rob Herring
• [PATCH v2 0/22] On-demand device probing   Rob Herring
• [PATCH v2 05/22] ACPI: add acpi_dev_get_device()   Rob Herring
• [PATCH v2 01/22] platform: delay device-driver matches until late_initcall   Rob Herring
• [PATCH V3 02/16] PM / OPP: Create a directory for opp bindings   Rob Herring
• [PATCH V3 01/16] PM / OPP: Update bindings to make opp-hz a 64 bit value   Rob Herring
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Rob Herring
• [PATCH v4 2/2] dt: power: st: Provide bindings for ST's OPPs   Rob Herring
• [PATCH V3 02/16] PM / OPP: Create a directory for opp bindings   Rob Herring
• [PATCH v3 1/2] PCI: generic: remove dependency on hw_pci   Rob Herring
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Rob Herring
• [PATCH 2/4] mfd: devicetree: bindings: Add clock subdevice node information   Rob Herring
• [PATCH v5 1/5] ARM/PCI: remove align_resource in pci_sys_data   Rob Herring
• [PATCH v2] dtb: Create a common home for cross-architecture dtsi files.   Rob Herring
• [PATCH v3] dtb: Create a common home for cross-architecture dtsi files.   Rob Herring
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Rob Herring
• [PATCH 0/2] arm: berlin: add cpu hotplug support   Sebastian Hesselbarth
• [PATCH v4 1/2] arm64: dts: Add dts files for Marvell Berlin4CT SoC   Sebastian Hesselbarth
• [PATCH v4 2/2] arm64: Enable Marvell Berlin SoC family in Kconfig and defconfig   Sebastian Hesselbarth
• [PATCH v5 0/2] arm64: Add basic support for Marvell Berlin4CT SoC   Sebastian Hesselbarth
• [PATCH v5 0/2] arm64: Add basic support for Marvell Berlin4CT SoC   Sebastian Hesselbarth
• [GIT PULL] omap generic wakeirq for v4.2 merge window   Kevin Hilman
• [PATCH RESEND v0] arm64: dts: Add APM X-Gene standby GPIO controller DTS entries   Kevin Hilman
• [RESEND PATCH 2/2] ARM: at91/dt: update udc compatible strings   Kevin Hilman
• [PATCH 0/2] ARM: BCM: Do not select MTD_NAND_BRCMNAND   Kevin Hilman
• [GIT PULL] ARM: mvebu: fixes changes for v4.1   Kevin Hilman
• [GIT PULL] ARM: mvebu: dt changes for v4.2   Kevin Hilman
• [GIT PULL] ARM: mvebu: fixes for v4.2   Kevin Hilman
• [GIT PULL] ARM: SoC: late fixes and dependencies   Kevin Hilman
• [PATCH V4] PM / Domains: Remove intermediate states from the power off sequence   Kevin Hilman
• [PATCH 0/3] arm/arm64: vexpress: DT updates for v4.2   Kevin Hilman
• [PATCH v1] arm64: dts: Add poweroff button device node for APM X-Gene platform   Kevin Hilman
• [GIT PULL] CSR atlas7 pinctrl descriptions for 4.2   Kevin Hilman
• [PATCH] GICv3: Add ITS entry to THUNDER dts   Kevin Hilman
• [GIT PULL] Allwinner late changes for 4.2   Kevin Hilman
• [PATCH 0/3] arm/arm64: vexpress: DT updates for v4.2   Kevin Hilman
• [GIT PULL] Allwinner late changes for 4.2   Kevin Hilman
• [GIT PULL] omap fixes against v4.2-rc1   Kevin Hilman
• [GIT PULL] ARM: SoC: fixes for v4.2-rc2   Kevin Hilman
• [PATCH 0/3] ARM: dts: Changes for Gumstix Pepper dts   Kevin Hilman
• [PATCH 2/2] arm64: Make all entry code as non-kprobe-able   Masami Hiramatsu
• [PATCH 1/2] arm64: Blacklist non-kprobe-able symbols   Masami Hiramatsu
• [PATCH 1/2] arm64: Blacklist non-kprobe-able symbols   Masami Hiramatsu
• [PATCH 1/2] arm64: Blacklist non-kprobe-able symbols   Masami Hiramatsu
• [PATCH 3/3] kexec: Change the timing of callbacks related to "crash_kexec_post_notifiers" boot option   Masami Hiramatsu
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   Masami Hiramatsu
• [PATCH-V5 4/4] mfd: devicetree: bindings: Add new 88pm800 mfd binding   Vaibhav Hiremath
• [PATCH-V5 4/4] mfd: devicetree: bindings: Add new 88pm800 mfd binding   Vaibhav Hiremath
• [RFC PATCH] pinctrl-single: Use of pinctrl-single for external device over I2C   Vaibhav Hiremath
• [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family   Vaibhav Hiremath
• [PATCH-V2 04/12] i2c: pxa: Reset i2c controller on timeout in interrupt and pio mode   Vaibhav Hiremath
• [PATCH-V2 07/12] i2c:pxa: Use devm_ variants in probe function   Vaibhav Hiremath
• [PATCH-V2 11/12] i2c: pxa: Add ILCR (tLow & tHigh) configuration support   Vaibhav Hiremath
• [PATCH-V2 08/12] i2c: pxa: enable/disable i2c module across msg xfer   Vaibhav Hiremath
• [PATCH-V2 08/12] i2c: pxa: enable/disable i2c module across msg xfer   Vaibhav Hiremath
• [RFC PATCH] pinctrl-single: Use of pinctrl-single for external device over I2C   Vaibhav Hiremath
• [PATCH-v3 00/11] i2c: pxa: Fixes, cleanup and support for pxa910 family   Vaibhav Hiremath
• [PATCH-v3 01/11] i2c: pxa: keep i2c irq ON in suspend   Vaibhav Hiremath
• [PATCH-v3 02/11] i2c: pxa: No need to set slave addr for i2c master mode reset   Vaibhav Hiremath
• [PATCH-v3 03/11] i2c: pxa: Return I2C_RETRY when timeout in pio mode   Vaibhav Hiremath
• [PATCH-v3 04/11] i2c: pxa: Remove compile warnning in 64bit mode   Vaibhav Hiremath
• [PATCH-v3 05/11] i2c: pxa: Update debug function to dump more info on error   Vaibhav Hiremath
• [PATCH-v3 06/11] i2c:pxa: Use devm_ variants in probe function   Vaibhav Hiremath
• [PATCH-v3 07/11] i2c: pxa: enable/disable i2c module across msg xfer   Vaibhav Hiremath
• [PATCH-v3 08/11] Documentation: binding: add new property 'disable_after_xfer' to i2c-pxa   Vaibhav Hiremath
• [PATCH-v3 09/11] i2c: pxa: Add support for pxa910/988 & new configuration features   Vaibhav Hiremath
• [PATCH-v3 10/11] i2c: pxa: Add ILCR (tLow & tHigh) configuration support   Vaibhav Hiremath
• [PATCH-v3 11/11] Documentation: binding: add sclk adjustment properties to i2c-pxa   Vaibhav Hiremath
• [rtc-linux] [PATCH-v2] rtc: 88pm80x: add device tree support   Vaibhav Hiremath
• [PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock   Vaibhav Hiremath
• [PATCH-V5 3/4] mfd: 88pm800: Set default interrupt clear method   Vaibhav Hiremath
• [PATCH-V5 3/4] mfd: 88pm800: Set default interrupt clear method   Vaibhav Hiremath
• [PATCH-V5 3/4] mfd: 88pm800: Set default interrupt clear method   Vaibhav Hiremath
• [PATCH-V5 3/4] mfd: 88pm800: Set default interrupt clear method   Vaibhav Hiremath
• [PATCH-V5 3/4] mfd: 88pm800: Set default interrupt clear method   Vaibhav Hiremath
• [PATCH-V5 3/4] mfd: 88pm800: Set default interrupt clear method   Vaibhav Hiremath
• [PATCH-v6 0/6] mfd: 88pm800: Add Device tree support   Vaibhav Hiremath
• [PATCH-v6 1/6] mfd: 88pm800: remove duplicate dev_err calls during probe   Vaibhav Hiremath
• [PATCH-v6 2/6] mfd: 88pm800: Add device tree support   Vaibhav Hiremath
• [PATCH-v6 3/6] mfd: 88pm800: Get pdata from 'device' rather than passing as a parameter   Vaibhav Hiremath
• [PATCH-v6 4/6] mfd: 88pm800: Remove unnecessary protection around pdata   Vaibhav Hiremath
• [PATCH-v6 5/6] mfd: 88pm800: Set default interrupt clear method   Vaibhav Hiremath
• [PATCH-v6 6/6] mfd: devicetree: bindings: Add new 88pm800 mfd binding   Vaibhav Hiremath
• [RESEND PATCH-v2] rtc: 88pm80x: add device tree support   Vaibhav Hiremath
• [PATCH 0/6] mfd: 88pm800: Add 88pm860 device support   Vaibhav Hiremath
• [PATCH 1/6] mfd: 88pm80x: Add 88pm860 chip type support   Vaibhav Hiremath
• [PATCH 2/6] mfd: 88pm800: Add init time initial configuration support   Vaibhav Hiremath
• [PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable   Vaibhav Hiremath
• [PATCH 4/6] mfd: 88pm800: Enable 32KHZ XO low jitter clock out   Vaibhav Hiremath
• [PATCH 5/6] mfd: devicetree: bindings: 88pm800: Add DT property for dual phase enable   Vaibhav Hiremath
• [PATCH 6/6] mfd: 88pm800: Add support for configuration of dual phase on BUCK1   Vaibhav Hiremath
• [RESEND PATCH-v2] rtc: 88pm80x: add device tree support   Vaibhav Hiremath
• [PATCH 0/3] regulator: 88pm800: Add 88pm860 regulator support   Vaibhav Hiremath
• [PATCH 1/3] regulator: 88pm800: Add 88pm860 regulator support   Vaibhav Hiremath
• [PATCH 2/3] regulator: 88pm800: fix LDO vsel_mask value   Vaibhav Hiremath
• [PATCH 3/3] regulator: 88pm800: Add dev_info to show probe success status   Vaibhav Hiremath
• [PATCH 0/6] mfd: 88pm800: Add 88pm860 device support   Vaibhav Hiremath
• [PATCH 0/6] mfd: 88pm800: Add 88pm860 device support   Vaibhav Hiremath
• [PATCH 0/6] mfd: 88pm800: Add 88pm860 device support   Vaibhav Hiremath
• [PATCH 2/3] regulator: 88pm800: fix LDO vsel_mask value   Vaibhav Hiremath
• [PATCH 3/3] regulator: 88pm800: Add dev_info to show probe success status   Vaibhav Hiremath
• [PATCH 3/3] regulator: 88pm800: Add dev_info to show probe success status   Vaibhav Hiremath
• [PATCH-v3 02/11] i2c: pxa: No need to set slave addr for i2c master mode reset   Vaibhav Hiremath
• [PATCH-v3 04/11] i2c: pxa: Remove compile warnning in 64bit mode   Vaibhav Hiremath
• [PATCH-v3 02/11] i2c: pxa: No need to set slave addr for i2c master mode reset   Vaibhav Hiremath
• [PATCH-v3 02/11] i2c: pxa: No need to set slave addr for i2c master mode reset   Vaibhav Hiremath
• [PATCH 2/6] mfd: 88pm800: Add init time initial configuration support   Vaibhav Hiremath
• [PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable   Vaibhav Hiremath
• [PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable   Vaibhav Hiremath
• [PATCH 5/6] mfd: devicetree: bindings: 88pm800: Add DT property for dual phase enable   Vaibhav Hiremath
• [PATCH 5/6] mfd: devicetree: bindings: 88pm800: Add DT property for dual phase enable   Vaibhav Hiremath
• [PATCH-v3 07/11] i2c: pxa: enable/disable i2c module across msg xfer   Vaibhav Hiremath
• [PATCH-v6 0/6] mfd: 88pm800: Add Device tree support   Vaibhav Hiremath
• [PATCH-v2 0/2] mfd: 88pm800: Add 88pm860 device support   Vaibhav Hiremath
• [PATCH-v2 1/2] mfd: 88pm80x: Add 88pm860 chip type support   Vaibhav Hiremath
• [PATCH-v2 2/2] mfd: 88pm800: Add init time initial configuration support   Vaibhav Hiremath
• [RFC PATCH] pinctrl-single: Use of pinctrl-single for external device over I2C   Vaibhav Hiremath
• [PATCH-v3 0/2] mfd: 88pm800: Add 88pm860 device support   Vaibhav Hiremath
• [PATCH-v3 1/2] mfd: 88pm80x: Add 88pm860 chip type support   Vaibhav Hiremath
• [PATCH-v3 2/2] mfd: 88pm800: Add init time initial configuration support   Vaibhav Hiremath
• [PATCH 0/5] regulator: 88pm800: Add 88pm860 regulator support   Vaibhav Hiremath
• [PATCH 1/5] regulator: 88pm800: Fix indentation of assignments of data structures   Vaibhav Hiremath
• [PATCH 2/5] regulator: 88pm800: Update driver to use devm_regulator_register fn   Vaibhav Hiremath
• [PATCH 3/5] regulator: 88pm800: Use regulator_nodes/of_match in the descriptor   Vaibhav Hiremath
• [PATCH 4/5] regulator: 88pm800: Add 88pm860 regulator support   Vaibhav Hiremath
• [PATCH 5/5] regulator: 88pm800: Add support for configuration of dual phase on BUCK1   Vaibhav Hiremath
• [PATCH 5/5] regulator: 88pm800: Add support for configuration of dual phase on BUCK1   Vaibhav Hiremath
• [PATCH 4/5] regulator: 88pm800: Add 88pm860 regulator support   Vaibhav Hiremath
• [PATCH 4/5] regulator: 88pm800: Add 88pm860 regulator support   Vaibhav Hiremath
• [PATCH-v3] mfd: 88pm80x: Add 88pm860 chip type support   Vaibhav Hiremath
• [PATCH 4/5] regulator: 88pm800: Add 88pm860 regulator support   Vaibhav Hiremath
• [PATCH 0/4] clk: 88pm800: Add new clk provider driver for 88PM800 MFD   Vaibhav Hiremath
• [PATCH 1/4] mfd: 88pm800: Update the header file with 32K clk related macros   Vaibhav Hiremath
• [PATCH 2/4] mfd: devicetree: bindings: Add clock subdevice node information   Vaibhav Hiremath
• [PATCH 3/4] clk: 88pm800: Add clk provider driver for 88pm800 family of devices   Vaibhav Hiremath
• [PATCH 4/4] mfd: 88pm800: Add support for clk subdevice   Vaibhav Hiremath
• [PATCH 4/5] regulator: 88pm800: Add 88pm860 regulator support   Vaibhav Hiremath
• [PATCH-v5 0/5] i2c: pxa: Add support for PXA910 family of device   Vaibhav Hiremath
• [PATCH-v5 1/5] Documentation: binding: add new property 'disable_after_xfer' to i2c-pxa   Vaibhav Hiremath
• [PATCH-v5 2/5] i2c: pxa: enable/disable i2c module across msg xfer   Vaibhav Hiremath
• [PATCH-v5 3/5] i2c: pxa: Add support for pxa910/988 & new configuration features   Vaibhav Hiremath
• [PATCH-v5 4/5] Documentation: binding: add sclk adjustment properties to i2c-pxa   Vaibhav Hiremath
• [PATCH-v5 5/5] i2c: pxa: Add ILCR (tLow & tHigh) configuration support   Vaibhav Hiremath
• [PATCH 4/5] regulator: 88pm800: Add 88pm860 regulator support   Vaibhav Hiremath
• [PATCH-v2 0/2] regulator: 88pm800: Add dual phase mode support on BUCK1   Vaibhav Hiremath
• [PATCH-v2 1/2] mfd: devicetree: bindings: 88pm800: Add DT property for dual phase enable   Vaibhav Hiremath
• [PATCH-v2 2/2] regulator: 88pm800: Add support for configuration of dual phase on BUCK1   Vaibhav Hiremath
• [PATCH 3/4] clk: 88pm800: Add clk provider driver for 88pm800 family of devices   Vaibhav Hiremath
• [PATCH 3/4] clk: 88pm800: Add clk provider driver for 88pm800 family of devices   Vaibhav Hiremath
• [PATCH 3/4] clk: 88pm800: Add clk provider driver for 88pm800 family of devices   Vaibhav Hiremath
• [PATCH] clk: s2mps11: Use kcalloc instead of kzalloc for array allocation   Vaibhav Hiremath
• [PATCH 0/2 RESEND] power: reset: Add syscon reboot/poweroff device nodes for APM X-Gene platform   Loc Ho
• [PATCH 0/2 RESEND] power: reset: Add syscon reboot/poweroff device nodes for APM X-Gene platform   Loc Ho
• [PATCH v2 0/3] edac: Add L3/SoC support to the APM X-Gene SoC EDAC driver   Loc Ho
• [PATCH v2 1/3] Documentation: Update the APM X-Gene SoC EDAC DTS binding for L3/SoC subnodes   Loc Ho
• [PATCH v2 2/3] edac: Add L3/SoC support to the APM X-Gene SoC EDAC driver   Loc Ho
• [PATCH v2 3/3] arm64: Add L3/SoC DT subnodes to the APM X-Gene SoC EDAC node   Loc Ho
• [PATCH v2 2/3] edac: Add L3/SoC support to the APM X-Gene SoC EDAC driver   Loc Ho
• [PATCH v2 2/3] edac: Add L3/SoC support to the APM X-Gene SoC EDAC driver   Loc Ho
• [PATCH 0/3] arm/arm64: vexpress: DT updates for v4.2   Sudeep Holla
• [PATCH 1/3] arm: dts: vexpress: describe all PMUs in TC2 dts   Sudeep Holla
• [PATCH 2/3] arm: dts: vexpress: add missing CCI PMU device node to TC2   Sudeep Holla
• [PATCH 3/3] arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG   Sudeep Holla
• [PATCH v2 3/4] ARM: mvebu: Allow using the GIC for wakeup in standby mode   Sudeep Holla
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Sudeep Holla
• [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor)   Sudeep Holla
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Sudeep Holla
• [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor)   Sudeep Holla
• [PATCH] ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake callback   Sudeep Holla
• [PATCH 0/3] arm/arm64: vexpress: DT updates for v4.2   Sudeep Holla
• [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor)   Sudeep Holla
• [PATCH v4 1/8] Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol   Sudeep Holla
• [PATCH 0/3] arm/arm64: vexpress: DT updates for v4.2   Sudeep Holla
• [PATCH] ARM: BCM63xx: fix parameter to of_get_cpu_node in bcm63138_smp_boot_secondary   Sudeep Holla
• [PATCH v2 3/3] drivers: firmware: psci: add system suspend support   Sudeep Holla
• [PATCH v2 3/3] drivers: firmware: psci: add system suspend support   Sudeep Holla
• [PATCH 3/3] arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG   Sudeep Holla
• [PATCH v2 3/3] drivers: firmware: psci: add system suspend support   Sudeep Holla
• [PATCH v2 3/3] drivers: firmware: psci: add system suspend support   Sudeep Holla
• [PATCH 1/2] irqchip: gic: enable SKIP_SET_WAKE and MASK_ON_SUSPEND   Sudeep Holla
• [PATCH 2/2] irqchip: gic: remove reduntant gic_set_irqchip_flags   Sudeep Holla
• [PATCH 1/2] irqchip: gic: enable SKIP_SET_WAKE and MASK_ON_SUSPEND   Sudeep Holla
• [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor)   Sudeep Holla
• [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor)   Sudeep Holla
• [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor)   Sudeep Holla
• [PATCH 1/2] arm64: dts: Add dts files for Marvell Berlin4CT SoC   Sudeep Holla
• [PATCH v3 1/2] arm64: dts: Add dts files for Marvell Berlin4CT SoC   Sudeep Holla
• [PATCH v4 1/8] Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol   Sudeep Holla
• [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor)   Sudeep Holla
• [PATCH v4 6/8] arm64: dts: add SRAM, MHU mailbox and SCPI support on Juno   Sudeep Holla
• [PATCH v4 1/8] Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol   Sudeep Holla
• [PATCH v4 6/8] arm64: dts: add SRAM, MHU mailbox and SCPI support on Juno   Sudeep Holla
• inquiries on juno   Sudeep Holla
• inquiries on juno   Sudeep Holla
• inquiries on juno   Sudeep Holla
• [PATCH v2 3/4] ARM: mvebu: Allow using the GIC for wakeup in standby mode   Sudeep Holla
• inquiries on juno   Sudeep Holla
• linux-next: build failure after merge of the tip tree   Sudeep Holla
• [PATCH v6 0/8] ARM64: juno: add SCPI mailbox protocol, clock and CPUFreq support   Sudeep Holla
• [PATCH v6 1/8] Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol   Sudeep Holla
• [PATCH v6 2/8] firmware: add support for ARM System Control and Power Interface(SCPI) protocol   Sudeep Holla
• [PATCH v6 3/8] clk: add support for clocks provided by SCP(System Control Processor)   Sudeep Holla
• [PATCH v6 4/8] clk: scpi: add support for cpufreq virtual device   Sudeep Holla
• [PATCH v6 5/8] cpufreq: arm_big_little: add SCPI interface driver   Sudeep Holla
• [PATCH v6 6/8] arm64: dts: add SRAM, MHU mailbox and SCPI support on Juno   Sudeep Holla
• [PATCH v6 7/8] arm64: dts: add CPU topology on Juno   Sudeep Holla
• [PATCH v6 8/8] arm64: dts: add clock support for all the cpus   Sudeep Holla
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Simon Horman
• [PATCH v2] ARM: shmobile: kzm9g dts: Use adxl345-specific compatible property   Simon Horman
• [PATCH 12/15] SH: kill off set_irq_flags usage   Simon Horman
• [PATCH 12/15] SH: kill off set_irq_flags usage   Simon Horman
• [PATCH v2] ARM: shmobile: kzm9g dts: Use adxl345-specific compatible property   Simon Horman
• [PATCH 12/15] SH: kill off set_irq_flags usage   Simon Horman
• [PATCH 01/16] ARM: shmobile: R-Mobile: Move to_rmobile_pd from header to source file   Simon Horman
• [PATCH 02/16] ARM: shmobile: R-Mobile: Use BIT() macro instead of open coding   Simon Horman
• [PATCH 03/16] ARM: shmobile: r8a7779: Remove GENPD_FLAG_PM_CLK flag   Simon Horman
• [PATCH 04/16] ARM: shmobile: Remove legacy board code for KZM-A9-GT   Simon Horman
• [PATCH 05/16] ARM: shmobile: Remove legacy kzm9g_defconfig   Simon Horman
• [PATCH 06/16] ARM: shmobile: Drop sh73a0-kzm9g.dtb for legacy builds   Simon Horman
• [PATCH 07/16] ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5   Simon Horman
• [PATCH 08/16] ARM: shmobile: Remove legacy board code for Armadillo-800 EVA   Simon Horman
• [PATCH 09/16] ARM: shmobile: Remove legacy armadillo800eva_defconfig   Simon Horman
• [PATCH 10/16] ARM: shmobile: Drop r8a7740-armadillo800eva.dtb for legacy builds   Simon Horman
• [PATCH 11/16] ARM: shmobile: Remove legacy SoC code for R-Mobile A1   Simon Horman
• [PATCH 12/16] ARM: shmobile: Remove unused dma-register.h   Simon Horman
• [PATCH 13/16] ARM: shmobile: R-Mobile: Remove legacy PM Domain code   Simon Horman
• [PATCH 14/16] ARM: shmobile: Remove obsolete zboot support   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Cleanup for v4.3   Simon Horman
• [PATCH 15/16] ARM: shmobile: R-Car Gen2: CONFIG_ARCH_SHMOBILE_MULTI is always set   Simon Horman
• [PATCH 16/16] ARM: shmobile: timer: r8a73a4 and r8a7790 are multi-platform only   Simon Horman
• [PATCH 1/8] ARM: shmobile: R-Car: Improve documentation   Simon Horman
• [PATCH 2/8] ARM: shmobile: R-Car: Shrink rcar_sysc_ch size   Simon Horman
• [PATCH 3/8] ARM: shmobile: R-Car: Break infinite loop   Simon Horman
• [PATCH 01/11] ARM: shmobile: add r8a7793 minimal SoC device tree   Simon Horman
• [PATCH 4/8] ARM: shmobile: R-Car: Make struct rcar_sysc_ch * parameters const   Simon Horman
• [PATCH 5/8] ARM: shmobile: R-Car: Use BIT() macro instead of open coding   Simon Horman
• [PATCH 02/11] ARM: shmobile: r8a7793: add minimal Gose board device tree   Simon Horman
• [PATCH 03/11] ARM: shmobile: r8a7790: add EtherAVB clocks   Simon Horman
• [PATCH 6/8] ARM: shmobile: R-Car: Get rid of on_off_fn() function pointer   Simon Horman
• [PATCH 7/8] ARM: shmobile: r8a7779: Make struct rcar_sysc_ch const   Simon Horman
• [GIT PULL] Renesas ARM Based SoC PM Domain Updates for v4.3   Simon Horman
• [PATCH 04/11] ARM: shmobile: r8a7790: add EtherAVB DT support   Simon Horman
• [PATCH 8/8] ARM: shmobile: r8a7790: Make struct rcar_sysc_ch const   Simon Horman
• [PATCH 05/11] ARM: shmobile: armadillo800eva dts: Add pinctrl and gpio-hog for lcdc0   Simon Horman
• [PATCH 06/11] ARM: shmobile: r8a73a4 dtsi: Use "arm,gic-400" for GIC   Simon Horman
• [PATCH 07/11] ARM: shmobile: r8a7790 dtsi: Use "arm,gic-400" for GIC   Simon Horman
• [PATCH 08/11] ARM: shmobile: r8a7791 dtsi: Use "arm,gic-400" for GIC   Simon Horman
• [PATCH 09/11] ARM: shmobile: r8a7793 dtsi: Use "arm,gic-400" for GIC   Simon Horman
• [PATCH 10/11] ARM: shmobile: r8a7794 dtsi: Use "arm,gic-400" for GIC   Simon Horman
• [PATCH 11/11] ARM: shmobile: r8a7779: Configure IRLM mode via DT   Simon Horman
• [GIT PULL] Renesas ARM Based SoC DT Updates for v4.3   Simon Horman
• [PATCH] ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig   Simon Horman
• [PATCH] ARM: multi_v7_defconfig: Remove Marzen   Simon Horman
• [PATCH] ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig   Simon Horman
• [PATCH] ARM: multi_v7_defconfig: Remove Marzen   Simon Horman
• [GIT PULL] Second Round of Renesas ARM Based SoC Cleanup for v4.3   Simon Horman
• [PATCH] ARM: shmobile: apmu: silence build warnings   Simon Horman
• [PATCH 1/9] ARM: shmobile: emev2: add IIC cores to dtsi   Simon Horman
• [PATCH 2/9] ARM: shmobile: emev2: kzm9d: enable IIC busses   Simon Horman
• [PATCH 3/9] ARM: shmobile: lager: add sound label on DTS   Simon Horman
• [PATCH 4/9] ARM: shmobile: koelsch: add sound label on DTS   Simon Horman
• [PATCH 5/9] ARM: shmobile: lager: Fix adv7511 IRQ sensing   Simon Horman
• [PATCH 6/9] ARM: shmobile: r8a7790: Add Audio CTU support on DTSI   Simon Horman
• [PATCH 7/9] ARM: shmobile: r8a7790: Add Audio MIX support on DTSI   Simon Horman
• [PATCH 8/9] ARM: shmobile: r8a7791: Add Audio CTU support on DTSI   Simon Horman
• [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.3   Simon Horman
• [PATCH 9/9] ARM: shmobile: r8a7791: Add Audio MIX support on DTSI   Simon Horman
• [PATCH 1/9] ARM: shmobile: r8a7779: Generic CCF and timer support   Simon Horman
• [PATCH 2/9] ARM: shmobile: r8a7779: Generic SMP ops   Simon Horman
• [PATCH 3/9] ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig   Simon Horman
• [PATCH 4/9] ARM: shmobile: marzen-reference: Remove C board code   Simon Horman
• [PATCH 5/9] ARM: shmobile: r8a7779: Cleanup header file   Simon Horman
• [PATCH 6/9] ARM: shmobile: Remove Marzen from shmobile_defconfig   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Marzen Board Removal for v4.3   Simon Horman
• [PATCH 7/9] ARM: multi_v7_defconfig: Remove Marzen   Simon Horman
• [PATCH 8/9] ARM: shmobile: marzen: Remove legacy board code   Simon Horman
• [PATCH 9/9] ARM: shmobile: r8a7779: Remove legacy SoC code   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Updates for v4.3   Simon Horman
• [PATCH 1/2] ARM: shmobile: Basic r8a7793 SoC support   Simon Horman
• [PATCH 2/2] ARM: shmobile: gose: enable R-Car Gen2 regulator quirk   Simon Horman
• [PATCH 1/5] ARM: shmobile: Enable gose board in multiplatform defconfig   Simon Horman
• [PATCH 2/5] ARM: multi_v7_defconfig: Enable shmobile r8a7793/gose platform   Simon Horman
• [PATCH 3/5] ARM: shmobile: defconfig: add Renesas DPCM Sound Card   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Defconfig Updates for v4.3   Simon Horman
• [PATCH 4/5] ARM: multi_v7_defconfig: add Renesas DPCM Sound Card   Simon Horman
• [PATCH 5/5] ARM: shmobile: Remove marzen_defconfig   Simon Horman
• [PATCH 0/2] ARM: shmobile: Add JPU device nodes to Renesas R-Car SoCs.   Simon Horman
• [PATCH v2] ARM: shmobile: r8a7794: add PFC DT support   Simon Horman
• [PATCH] ARM: shmobile: r8a7794: add PFC DT support   Simon Horman
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Simon Horman
• [PATCH v3] ARM: shmobile: silk: initial device tree   Simon Horman
• [PATCH RESEND] ARM: shmobile: silk: add Ether DT support   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Marzen Board Removal for v4.3   Simon Horman
• [GIT PULL] Second Round of Renesas ARM Based SoC Defconfig Updates for v4.3   Simon Horman
• [PATCH] ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig   Simon Horman
• [PATCH 1/9] gpiolib: Fix possible use of wrong name   Johan Hovold
• [PATCH 3/9] gpio: Allow hogged gpios to be requested   Johan Hovold
• [PATCH 4/9] gpio: Add 'name' to the gpio descriptor struct   Johan Hovold
• [PATCH 6/9] gpiolib-of: Reuse 'line-name' from DT as gpio descriptor name   Johan Hovold
• [PATCH 7/9] gpiolib-sysfs: Add gpio name parsing for sysfs export   Johan Hovold
• [PATCH 8/9] gpiolib-sysfs: Show gpio-name in /sys/class/gpio/gpio*/name   Johan Hovold
• [PATCH 9/9] gpiolib: Add gpio name information to /sys/kernel/debug/gpio   Johan Hovold
• [PATCH 0/9] gpiolib: Add GPIO name support   Johan Hovold
• [PATCH 7/9] gpiolib-sysfs: Add gpio name parsing for sysfs export   Johan Hovold
• [PATCH 9/9] gpiolib: Add gpio name information to /sys/kernel/debug/gpio   Johan Hovold
• [PATCH 0/9] gpiolib: Add GPIO name support   Johan Hovold
• [PATCH 0/9] gpiolib: Add GPIO name support   Johan Hovold
• [PATCH 9/9] gpiolib: Add gpio name information to /sys/kernel/debug/gpio   Johan Hovold
• [PATCH] rtc-mt6397: enable wakeup before registering rtc device   Eddie Huang
• [PATCH] dts: mt8173-oak: Add da9211 to i2c1   Eddie Huang
• [PATCH] arm64: dts: mt8173-evb: Add PMIC support   Eddie Huang
• [PATCH] arm64: dts: mt8173-evb: Add PMIC support   Eddie Huang
• [PATCH] arm64: dts: mt8173: add clock_null   Eddie Huang
• [PATCH] arm64: dts: mt8173: add clock_null   Eddie Huang
• [PATCH] arm64: dts: mt8173: add clock_null   Eddie Huang
• [PATCH 0/2] Add Mediatek watchdog suspend resume and shutdown   Eddie Huang
• [PATCH 1/2] watchdog: add wdt suspend/resume support   Eddie Huang
• [PATCH 2/2] watchdog: add wdt shutdown callback to disable wdt if enabled   Eddie Huang
• [PATCH 1/2] watchdog: add wdt suspend/resume support   Eddie Huang
• [PATCH v2 0/2] Add Mediatek watchdog suspend resume and shutdown   Eddie Huang
• [PATCH v2 1/2] watchdog: add wdt suspend/resume support   Eddie Huang
• [PATCH v2 2/2] watchdog: add wdt shutdown callback to disable wdt if enabled   Eddie Huang
• [PATCH] soc: mediatek: add scpsys support active_wakeup   Eddie Huang
• [PATCH v3 0/2] Add Mediatek watchdog suspend resume and shutdown   Eddie Huang
• [PATCH v3 1/2] watchdog: mtk_wdt: add suspend/resume support   Eddie Huang
• [PATCH v3 2/2] watchdog: mtk_wdt: add wdt shutdown callback to disable wdt if enabled   Eddie Huang
• [PATCH] i2c: mediatek: fix transfer error handling   Eddie Huang
• [PATCH] rtc: mt6397: implement suspend/resume function in rtc-mt6397 driver   Eddie Huang
• [PATCH] rtc-mt6397: enable wakeup before registering rtc device   Wei-Ning Huang
• [PATCH v3 0/2] Add MediaTek display PWM driver   YH Huang
• [PATCH v4 0/3] Add MediaTek display PWM driver   YH Huang
• [PATCH v4 1/3] dt-bindings: pwm: add MediaTek display PWM bindings   YH Huang
• [PATCH v4 2/3] pwm: add MediaTek display PWM driver support   YH Huang
• [PATCH v4 3/3] arm64: dts: mt8173: add MT8173 display PWM driver support dtsi   YH Huang
• [PATCH v4 3/3] arm64: dts: mt8173: add MT8173 display PWM driver support dtsi   YH Huang
• [PATCH v4 1/3] dt-bindings: pwm: add MediaTek display PWM bindings   YH Huang
• [PATCH v4 1/3] dt-bindings: pwm: add MediaTek display PWM bindings   YH Huang
• [PATCH v5 0/3] Add MediaTek display PWM driver   YH Huang
• [PATCH v5 1/3] dt-bindings: pwm: add MediaTek display PWM bindings   YH Huang
• [PATCH v5 2/3] pwm: add MediaTek display PWM driver support   YH Huang
• [PATCH v5 3/3] arm64: dts: mt8173: add MT8173 display PWM driver support node   YH Huang
• [PATCH v5 1/3] dt-bindings: pwm: add MediaTek display PWM bindings   YH Huang
• [PATCH v5 2/3] pwm: add MediaTek display PWM driver support   YH Huang
• [PATCH v5 2/3] pwm: add MediaTek display PWM driver support   YH Huang
• [PATCH v5 2/3] pwm: add MediaTek display PWM driver support   YH Huang
• [PATCH v5 2/3] pwm: add MediaTek display PWM driver support   YH Huang
• [PATCH v5 2/3] pwm: add MediaTek display PWM driver support   YH Huang
• [PATCH v5 2/3] pwm: add MediaTek display PWM driver support   YH Huang
• [PATCH v6 0/3] Add MediaTek display PWM driver   YH Huang
• [PATCH v6 1/3] dt-bindings: pwm: add MediaTek display PWM bindings   YH Huang
• [PATCH v6 2/3] pwm: add MediaTek display PWM driver support   YH Huang
• [PATCH v6 3/3] arm64: dts: mt8173: add MT8173 display PWM driver support node   YH Huang
• [PATCH v6 0/3] Add MediaTek display PWM driver   YH Huang
• [PATCH v6 0/3] Add MediaTek display PWM driver   YH Huang
• [PATCH v3 07/11] KVM: arm: add trap handlers for 64-bit debug registers   Zhichao Huang
• [PATCH v3 08/11] KVM: arm: implement dirty bit mechanism for debug registers   Zhichao Huang
• [PATCH v3 09/11] KVM: arm: implement lazy world switch for debug registers   Zhichao Huang
• [PATCH v3 08/11] KVM: arm: implement dirty bit mechanism for debug registers   Zhichao Huang
• [PATCH v3 08/11] KVM: arm: implement dirty bit mechanism for debug registers   Zhichao Huang
• [PATCH v3 08/11] KVM: arm: implement dirty bit mechanism for debug registers   Zhichao Huang
• [PATCH] KVM: Add Kconfig option to signal cross-endian guests   Cornelia Huck
• [RESEND PATCH v3] ARM: tegra124: pmu support   Kyle Huey
• [RESEND PATCH v3] ARM: tegra124: pmu support   Kyle Huey
• [PATCH] ARM: ptrace: Implement PTRACE_SYSEMU   Kyle Huey
• [RESEND PATCH v3] ARM: tegra124: pmu support   Kyle Huey
• [PATCH v2] iio: adc: xilinx-xadc: Push interrupts into threaded context   Xander Huff
• [PATCH v2] iio: adc: xilinx-xadc: Push interrupts into threaded context   Xander Huff
• [PATCH v2] iio: adc: xilinx-xadc: Push interrupts into threaded context   Xander Huff
• [PATCH v3] iio: adc: xilinx-xadc: Push interrupts into threaded context   Xander Huff
• Tegra baseline test results for v4.1   Jon Hunter
• Tegra baseline test results for v4.2-rc1   Jon Hunter
• [PATCH V3 00/19] Add generic PM domain support for Tegra SoCs   Jon Hunter
• [PATCH V3 01/19] reset: add of_reset_control_get_by_index()   Jon Hunter
• [PATCH V3 02/19] memory: tegra: Add MC flush support   Jon Hunter
• [PATCH V3 03/19] memory: tegra: add flush operation for Tegra30 memory clients   Jon Hunter
• [PATCH V3 04/19] memory: tegra: add flush operation for Tegra114 memory clients   Jon Hunter
• [PATCH V3 05/19] memory: tegra: add flush operation for Tegra124 memory clients   Jon Hunter
• [PATCH V3 06/19] clk: tegra: remove TEGRA_PLL_USE_LOCK for PLLD/PLLD2   Jon Hunter
• [PATCH V3 07/19] soc: tegra: pmc: Wait for powergate state to change   Jon Hunter
• [PATCH V3 08/19] soc: tegra: pmc: Clean-up PMC helper functions   Jon Hunter
• [PATCH V3 09/19] soc: tegra: pmc: Prepare for migrating to generic PM domains   Jon Hunter
• [PATCH V3 10/19] drm/tegra: dc: Prepare for generic PM domains   Jon Hunter
• [PATCH V3 11/19] PCI: tegra: Add support for generic PM domains   Jon Hunter
• [PATCH V3 12/19] ata: ahci_tegra: Add support for generic PM domains   Jon Hunter
• [PATCH V3 13/19] drm/tegra: gr3d: Add support for generic PM domains   Jon Hunter
• [PATCH V3 14/19] Documentation: DT: bindings: Add power domain info for NVIDIA PMC   Jon Hunter
• [PATCH V3 15/19] soc: tegra: pmc: Add generic PM domain support   Jon Hunter
• [PATCH V3 16/19] soc: tegra: pmc: Remove the deprecated powergate APIs   Jon Hunter
• [PATCH V3 17/19] ARM: tegra: Add PM domain device nodes to Tegra124 DT   Jon Hunter
• [PATCH V3 18/19] ARM: tegra: add GPU power supply to Jetson TK1 DT   Jon Hunter
• [PATCH V3 19/19] ARM: tegra: select PM_GENERIC_DOMAINS   Jon Hunter
• [PATCH] ARM: tegra: Enable CPUFreq support for Tegra124 Chromebooks   Jon Hunter
• [PATCH V3 06/19] clk: tegra: remove TEGRA_PLL_USE_LOCK for PLLD/PLLD2   Jon Hunter
• [PATCH V3 19/19] ARM: tegra: select PM_GENERIC_DOMAINS   Jon Hunter
• [PATCH V3 06/19] clk: tegra: remove TEGRA_PLL_USE_LOCK for PLLD/PLLD2   Jon Hunter
• [PATCH V3 19/19] ARM: tegra: select PM_GENERIC_DOMAINS   Jon Hunter
• [RESEND PATCH v3] ARM: tegra124: pmu support   Jon Hunter
• [PATCH v2 2/4] drm/tegra: Add VIC support   Jon Hunter
• [PATCH V3 02/19] memory: tegra: Add MC flush support   Jon Hunter
• [PATCH v2 2/4] drm/tegra: Add VIC support   Jon Hunter
• [PATCH V3 03/19] memory: tegra: add flush operation for Tegra30 memory clients   Jon Hunter
• [PATCH V3 07/19] soc: tegra: pmc: Wait for powergate state to change   Jon Hunter
• [PATCH V3 08/19] soc: tegra: pmc: Clean-up PMC helper functions   Jon Hunter
• Tegra baseline test results for v4.2-rc2   Jon Hunter
• Tegra baseline test results for v4.2-rc3   Jon Hunter
• Tegra baseline test results for v4.2-rc4   Jon Hunter
• [PATCH V3 10/19] drm/tegra: dc: Prepare for generic PM domains   Jon Hunter
• [PATCH V3 11/19] PCI: tegra: Add support for generic PM domains   Jon Hunter
• [PATCH V3 10/19] drm/tegra: dc: Prepare for generic PM domains   Jon Hunter
• [PATCH] irqchip: gic: Add a cpu map for each GIC instance   Jon Hunter
• [PATCH] irqchip: gic: Add a cpu map for each GIC instance   Jon Hunter
• [PATCH] irqchip: gic: Add a cpu map for each GIC instance   Jon Hunter
• [PATCH] irqchip: gic: Add a cpu map for each GIC instance   Jon Hunter
• [PATCH] irqchip: gic: Add a cpu map for each GIC instance   Jon Hunter
• [PATCH] irqchip/gic: Only allow the primary GIC to set the CPU map   Jon Hunter
• [PATCH] irqchip/gic: Only allow the primary GIC to set the CPU map   Jon Hunter
• [PATCH] irqchip/gic: Only allow the primary GIC to set the CPU map   Jon Hunter
• [PATCH 1/2] irqchip/gic: Only allow the primary GIC to set the CPU map   Jon Hunter
• [PATCH 2/2] irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance   Jon Hunter
• [PATCH 2/2] irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance   Jon Hunter
• [PATCH 2/2] irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance   Jon Hunter
• [PATCH 2/2] irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance   Jon Hunter
• [PATCH V2 1/2] irqchip/gic: Only allow the primary GIC to set the CPU map   Jon Hunter
• [PATCH V2 2/2] irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance   Jon Hunter
• [PATCH v3] serial: mxs-auart: keep the AUART unit in reset state when not in use   Peter Hurley
• [PATCH v3] serial: mxs-auart: keep the AUART unit in reset state when not in use   Peter Hurley
• [PATCH] tty/serial: atmel: use proper accessors   Peter Hurley
• [PATCH] KVM: Add Kconfig option to signal cross-endian guests   Thomas Huth
• [PATCH] KVM: Add Kconfig option to signal cross-endian guests   Thomas Huth
• [PATCH v2] arm: dma-mapping: fix off-by-one error in bitmap size check   Hyungwon Hwang
• [PATCH v4 0/2] USB OTG PHY driver for NXP LPC18xx family   Kishon Vijay Abraham I
• [PATCH v4 1/2] phy-sun4i-usb: Add full support for usb0 phy / OTG   Kishon Vijay Abraham I
• [PATCH v4 1/2] phy-sun4i-usb: Add full support for usb0 phy / OTG   Kishon Vijay Abraham I
• [PATCH v5 0/7] phy-sun4i-usb: Add OTG and newer SoC support   Kishon Vijay Abraham I
• [PATCH v6 1/4] phy-sun4i-usb: Add missing EXPORT_SYMBOL for sun4i_usb_phy_set_squelch_detect   Kishon Vijay Abraham I
• [PATCH v6 1/4] phy-sun4i-usb: Add missing EXPORT_SYMBOL for sun4i_usb_phy_set_squelch_detect   Kishon Vijay Abraham I
• [PATCH 0/4] phy: berlin-usb: PLL divider fixes   Kishon Vijay Abraham I
• [PATCH] phy: Drop owner assignment from platform_driver   Kishon Vijay Abraham I
• [PATCH 0/4] omap: Fix broken pbias device creation   Kishon Vijay Abraham I
• [RFT PATCH 1/4] ARM: dts: omap24xx: Fix broken pbias device creation   Kishon Vijay Abraham I
• [PATCH 2/4] ARM: dts: OMAP4: Fix broken pbias device creation   Kishon Vijay Abraham I
• [PATCH 3/4] ARM: dts: OMAP5: Fix broken pbias device creation   Kishon Vijay Abraham I
• [PATCH 4/4] ARM: dts: dra7: Fix broken pbias device creation   Kishon Vijay Abraham I
• [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs   Kishon Vijay Abraham I
• [PATCH 0/2] pci: am57xx-evm: Fix PCIe card enumeration issue   Kishon Vijay Abraham I
• [PATCH 1/2] pci: host: pci-dra7xx: Add support to make gpio drive PERST# line   Kishon Vijay Abraham I
• [PATCH 2/2] ARM: dts: am57xx-evm: Add 'gpios' property with gpio2_8   Kishon Vijay Abraham I
• [PATCH 00/17] omap_hsmmc: regulator usage cleanup and fixes   Kishon Vijay Abraham I
• [PATCH 01/17] mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc   Kishon Vijay Abraham I
• [PATCH 02/17] mmc: host: omap_hsmmc: return error from omap_hsmmc_reg_get on -EPROBE_DEFER   Kishon Vijay Abraham I
• [PATCH 03/17] mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get()   Kishon Vijay Abraham I
• [PATCH 04/17] mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulator   Kishon Vijay Abraham I
• [PATCH 05/17] mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc   Kishon Vijay Abraham I
• [PATCH 06/17] mmc: host: omap_hsmmc: remove unnecessary pbias set_voltage   Kishon Vijay Abraham I
• [PATCH 07/17] mmc: host: omap_hsmmc: return error if any of the regulator APIs fail   Kishon Vijay Abraham I
• [PATCH 08/17] mmc: host: omap_hsmmc: add separate functions for enable/disable supply   Kishon Vijay Abraham I
• [PATCH 09/17] mmc: host: omap_hsmmc: add separate function to set pbias   Kishon Vijay Abraham I
• [PATCH 10/17] mmc: host: omap_hsmmc: avoid pbias regulator enable on power off   Kishon Vijay Abraham I
• [PATCH 11/17] mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator state   Kishon Vijay Abraham I
• [PATCH 12/17] ARM: dts: am57xx-beagle-x15: Fix regulator populated in MMC1 dt node   Kishon Vijay Abraham I
• [PATCH 13/17] mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on prior state   Kishon Vijay Abraham I
• [PATCH 14/17] mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status   Kishon Vijay Abraham I
• [PATCH 15/17] mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltage   Kishon Vijay Abraham I
• [PATCH 16/17] mmc: host: omap_hsmmc: remove CONFIG_REGULATOR check   Kishon Vijay Abraham I
• [PATCH 17/17] mmc: host: omap_hsmmc: use "mmc_of_parse_voltage" to get ocr_avail   Kishon Vijay Abraham I
• [PATCH 00/11] omap_hsmmc: voltage switching and tuning   Kishon Vijay Abraham I
• [PATCH 01/11] mmc: host: omap_hsmmc: Support vmmc_aux to switch to 1.8v   Kishon Vijay Abraham I
• [PATCH 02/11] mmc: host: omap_hsmmc: separate setting voltage capabilities from bus power   Kishon Vijay Abraham I
• [PATCH 03/11] mmc: host: omap_hsmmc: program HCTL based on signal_voltage set by mmc core   Kishon Vijay Abraham I
• [PATCH 04/11] mmc: host: omap_hsmmc: add voltage switch support for UHS SD card   Kishon Vijay Abraham I
• [PATCH 05/11] mmc: host: omap_hsmmc: set clk rate to the max frequency   Kishon Vijay Abraham I
• [PATCH 06/11] mmc: host: omap_hsmmc: set timing in the UHSMS field   Kishon Vijay Abraham I
• [PATCH 07/11] mmc: host: omap_hsmmc: add tuning support   Kishon Vijay Abraham I
• [PATCH 08/11] mmc: host: omap_hsmmc: Workaround for errata id i802   Kishon Vijay Abraham I
• [PATCH 09/11] mmc: host: omap_hsmmc: Allow io voltage switch even for fixed vdd   Kishon Vijay Abraham I
• [PATCH 10/11] mmc: host: omap_hsmmc: remove incorrect voltage switch sequence   Kishon Vijay Abraham I
• [PATCH 11/11] mmc: host: omap_hsmmc: add software timer when timeout greater than hardware capablility   Kishon Vijay Abraham I
• [PATCH 0/7] ARM: dts: MMC fixes for DRA7 based boards   Kishon Vijay Abraham I
• [PATCH 1/7] ARM: dts: dra72-evm: add evm_3v3_sd regulator   Kishon Vijay Abraham I
• [PATCH 2/7] ARM: dts: dra7-evm: add evm_3v3_sd regulator   Kishon Vijay Abraham I
• [PATCH 3/7] ARM: dts: dra72-evm: Set max clock frequency of MMC1 and MMC2   Kishon Vijay Abraham I
• [PATCH 4/7] ARM: dts: dra7-evm: Add MMCSD card removal GPIO   Kishon Vijay Abraham I
• [PATCH 5/7] ARM: dts: am57xx-beagle-x15: mmc1: remove redundant pbias-supply property   Kishon Vijay Abraham I
• [PATCH 6/7] ARM: dts: dra7-evm: Fix spurious card insert/removal interrupt   Kishon Vijay Abraham I
• [PATCH 7/7] ARM: dts: dra72-evm: Fix spurious card insert/removal interrupt   Kishon Vijay Abraham I
• [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs   Kishon Vijay Abraham I
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Kishon Vijay Abraham I
• [PATCH 01/17] mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc   Kishon Vijay Abraham I
• [RFC PATCH 8/8] powerpc/fsl: Use new clockgen binding   Liberman Igal
• [PATCH 2/2] ARM: OMAP2+: Remove legacy booting support for Pandora   Grazvydas Ignotas
• [PATCH 2/2] ARM: OMAP2+: Remove legacy booting support for Pandora   Grazvydas Ignotas
• [PATCH 1/4] ARM: dts: omap3-pandora: miscellaneous corrections   Grazvydas Ignotas
• [PATCH 2/4] ARM: dts: omap3-pandora: add support for usb host and 32k buffer   Grazvydas Ignotas
• [PATCH 3/4] ARM: OMAP2+: omap3-pandora: add backlight support   Grazvydas Ignotas
• [PATCH 4/4] ARM: OMAP2+: omap3-pandora: add wifi support   Grazvydas Ignotas
• [PATCH] Doc: trace: Fix typo in coresight.txt   Masanari Iida
• [PATCH V4 2/7] qup: i2c: factor out common code for reuse   Ivan T. Ivanov
• [PATCH V4 3/7] i2c: qup: Add V2 tags support   Ivan T. Ivanov
• [PATCH V4 4/7] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit   Ivan T. Ivanov
• [PATCH V4 5/7] i2c: qup: Add bam dma capabilities   Ivan T. Ivanov
• drm/edid: sound/core: pcm_drm_eld.c compilation error in 4.2   Takashi Iwai
• [PATCH RFC v2 09/16] arm: domain: Add platform callbacks for domain power on/off   Lina Iyer
• [PATCH RFC v2 09/16] arm: domain: Add platform callbacks for domain power on/off   Lina Iyer
• [PATCH V4] PM / Domains: Remove intermediate states from the power off sequence   Lina Iyer
• [PATCH v3 2/3] ARM: cpuidle: refine cpuidle_ops member's parameters.   Lina Iyer
• [PATCH v3 2/3] ARM: cpuidle: refine cpuidle_ops member's parameters.   Lina Iyer
• [PATCH] drivers: qcom: Select QCOM_SCM unconditionally for QCOM_PM   Lina Iyer
• Build error with !CONFIG_SMP in v4.2-rc1 on arm multi_v7_defconfig   Lina Iyer
• [PATCH RFC v2 09/16] arm: domain: Add platform callbacks for domain power on/off   Lina Iyer
• [PATCH v5 1/3] drm/layerscape: Add Freescale DCU DRM driver   Wang J.W.
• [PATCH v5 1/3] drm/layerscape: Add Freescale DCU DRM driver   Wang J.W.
• [PATCH v6 1/4] drm/layerscape: Add Freescale DCU DRM driver   Wang J.W.
• [PATCH v6 1/4] drm/layerscape: Add Freescale DCU DRM driver   Wang J.W.
• [PATCH v6 1/4] drm/layerscape: Add Freescale DCU DRM driver   Wang J.W.
• [PATCH v7 1/4] drm/layerscape: Add Freescale DCU DRM driver   Wang J.W.
• [PATCH v8 1/4] drm/layerscape: Add Freescale DCU DRM driver   Wang J.W.
• [PATCH v9 1/4] drm/layerscape: Add Freescale DCU DRM driver   Wang J.W.
• [PATCH v9 2/4] drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel   Wang J.W.
• [PATCH v9 1/4] drm/layerscape: Add Freescale DCU DRM driver   Wang J.W.
• [PATCH v9 3/4] arm/dts/ls1021a: Add DCU dts node   Wang J.W.
• [PATCH] arm64: pci: add support for pci_mmap_page_range   Jerin Jacob
• [PATCH] arm64: pci: add support for pci_mmap_page_range   Jerin Jacob
• [PATCH] arm64: pci: add support for pci_mmap_page_range   Jerin Jacob
• [PATCH V3] tty: serial: imx.c: Reset UART before activating interrupts   David Jander
• [PATCH-V2 04/12] i2c: pxa: Reset i2c controller on timeout in interrupt and pio mode   Robert Jarzmik
• [PATCH-V2 07/12] i2c:pxa: Use devm_ variants in probe function   Robert Jarzmik
• [PATCH-V2 11/12] i2c: pxa: Add ILCR (tLow & tHigh) configuration support   Robert Jarzmik
• [PATCH-V2 08/12] i2c: pxa: enable/disable i2c module across msg xfer   Robert Jarzmik
• [PATCH-V2 08/12] i2c: pxa: enable/disable i2c module across msg xfer   Robert Jarzmik
• [PATCH] ARM: mact-pxa: Use module_platform_driver   Robert Jarzmik
• [PATCH-V2 02/12] i2c: pxa: No need to set slave addr for i2c master mode reset   Robert Jarzmik
• [PATCH-V2 03/12] i2c: pxa: Return I2C_RETRY when timeout in pio mode   Robert Jarzmik
• [PATCH 16/41] clocksource: pxa: Migrate to new 'set-state' interface   Robert Jarzmik
• [PATCH v3 1/6] ARM: dts: pxa: add dma controller   Robert Jarzmik
• [PATCH 16/41] clocksource: pxa: Migrate to new 'set-state' interface   Robert Jarzmik
• [PATCH 28/37] usb: gadget: pxa27x_udc: add ep capabilities support   Robert Jarzmik
• [PATCH] ARM: pxa: fix dm9000 platform data regression   Robert Jarzmik
• [PATCH v2 01/13] ARM: kill off set_irq_flags usage   Robert Jarzmik
• [PATCH] ARM: pxa: Use setup_timer   Robert Jarzmik
• [PATCH 3/8] pcmcia: pxa2xx: update socket driver to use devm_clk_get() API   Robert Jarzmik
• [PATCH 4/8] pcmcia: pxa2xx: convert memory allocation to devm_* API   Robert Jarzmik
• [PATCH 8/8] pcmcia: soc_common: remove skt_dev_info's clk pointer   Robert Jarzmik
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Robert Jarzmik
• [PATCH] ARM: pxa: fix dm9000 platform data regression   Robert Jarzmik
• [PATCH v2 0/4] mtd: pxa3xx_nand: rework the timing setup   Robert Jarzmik
• [GIT PULL] pxa fixes for v4.2   Robert Jarzmik
• [GIT PULL] pxa for v4.3   Robert Jarzmik
• [GIT PULL] pxa-dt for v4.3   Robert Jarzmik
• [GIT PULL] pxa for v4.3   Robert Jarzmik
• [PATCH v2 0/4] mtd: pxa3xx_nand: rework the timing setup   Robert Jarzmik
• [GIT PULL] pxa for v4.3 - v2   Robert Jarzmik
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Robert Jarzmik
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Robert Jarzmik
• [PATCH] arm: dts: ls1021a: Add LTC2945 node for LS1021A TWR board   Hongtao Jia
• [PATCH] arm64: dts: mediatek: Add MT8173 MMC dts   Chaotian Jing
• [PATCH] ARM: dts: cros-ec-keyboard: Add support for some Japanese keys   Olof Johansson
• [PATCH 0/2 RESEND] power: reset: Add syscon reboot/poweroff device nodes for APM X-Gene platform   Olof Johansson
• [PATCH 1/2] ARM: ux500: define serial port aliases   Olof Johansson
• [PATCH 2/2] ARM: ux500: fix MMC/SD card regression   Olof Johansson
• [GIT PULL] SoCFPGA fixes for v4.2-rc1   Olof Johansson
• [PATCH 4/4] MAINTAINERS: digicolor: add dts files   Olof Johansson
• [PATCH 0/4] ARM: digicolor: misc updates for 4.3   Olof Johansson
• [PATCH v2 0/3] ARM: add UART and EHCI support for UniPhier DTS and enable them.   Olof Johansson
• [PATCH v0] arm64: dts: Add APM X-Gene standby GPIO controller DTS entries   Olof Johansson
• [GIT PULL] Renesas ARM Based SoC Cleanup for v4.3   Olof Johansson
• [GIT PULL] Renesas ARM Based SoC PM Domain Updates for v4.3   Olof Johansson
• [GIT PULL] Renesas ARM Based SoC DT Updates for v4.3   Olof Johansson
• [GIT PULL] ARM: imx: fixes for 4.2   Olof Johansson
• [PATCH] arm64: dts: sprd: adding ETM entries to Spreadtrum SC9836   Olof Johansson
• [PATCH] arm64: Split out platform options to separate Kconfig   Olof Johansson
• [GIT PULL] omap fixes against v4.2-rc2   Olof Johansson
• [GIT PULL] omap dts changes for v4.3, part 1   Olof Johansson
• [PATCH] arm64: enable more compressed Image formats   Olof Johansson
• [PATCH] arm64: enable more compressed Image formats   Olof Johansson
• [PATCH v2] arm64: enable more compressed Image formats   Olof Johansson
• [PATCH 00/17] LPC18xx DTS changes for 4.3   Olof Johansson
• [PULL] ARM: clockevents: Migrate to 'set-state' callbacks   Olof Johansson
• [GIT PULL] ARM: mvebu: cleanup changes for v4.3   Olof Johansson
• [GIT PULL] ARM: mvebu: dt changes for v4.3   Olof Johansson
• [GIT PULL] ARM: mvebu: config changes for v4.3   Olof Johansson
• [PATCH 0/2] ARM: Couple of dts fixes for v4.2-rcx   Olof Johansson
• [GIT PULL] Broadcom Device Tree changes for 4.3 (part 1)   Olof Johansson
• [GIT PULL] Broadcom SoC changes for 4.3 (part 1)   Olof Johansson
• [GIT PULL] EP93xx cleanups for v4.3   Olof Johansson
• [GIT PULL] EP93xx defconfig changes   Olof Johansson
• [PATCH] arm64: Split out platform options to separate Kconfig   Olof Johansson
• [PATCH] arm64: Split out platform options to separate Kconfig   Olof Johansson
• [PATCH 1/3] arm64: add Rockchip architecture entry   Olof Johansson
• [PATCH 3/3] arm64: dts: add Rockchip rk3368 core dtsi and board dts for the r88 board   Olof Johansson
• [GIT PULL 2/2] Rockchip dts changes for 4.3, part1   Olof Johansson
• [GIT PULL 1/2] Rockchip soc changes for 4.3, part1   Olof Johansson
• [PATCH 2/3] arm64: defconfig: enable ARCH_ROCKCHIP   Olof Johansson
• [PATCH v2 0/2] Add support for PL172 memory-controller   Olof Johansson
• [GIT PULL] pxa fixes for v4.2   Olof Johansson
• [GIT PULL] ARM: SoC fixes   Olof Johansson
• [PATCH] arm64: Minor refactoring of cpu_switch_to() to fix build breakage   Olof Johansson
• [PATCH] arm64: Minor refactoring of cpu_switch_to() to fix build breakage   Olof Johansson
• [GIT PULL] Samsung 1st fixes for v4.2   Olof Johansson
• [GIT PULL] pxa-dt for v4.3   Olof Johansson
• [PATCH 0/2 RESEND] power: reset: Add syscon reboot/poweroff device nodes for APM X-Gene platform   Olof Johansson
• [PATCH 0/2 RESEND] power: reset: Add syscon reboot/poweroff device nodes for APM X-Gene platform   Olof Johansson
• [PATCH] memory: pl172: fix modular build   Olof Johansson
• [GIT PULL 1/3] omap dts changes for v4.3, part2   Olof Johansson
• [GIT PULL 2/3] drop few more legacy boards for v4.3   Olof Johansson
• [GIT PULL 3/3] defconfig changes for v4.3g   Olof Johansson
• [PATCH] ARM: dts: Add STM32429i-EVAL board support   Olof Johansson
• [GIT PULL] STM32 DT changes for v4.3   Olof Johansson
• [PATCH 0/2 RESEND] power: reset: Add syscon reboot/poweroff device nodes for APM X-Gene platform   Olof Johansson
• [GIT PULL] ARM: OMAP2+: hwmod fixes for v4.2-rc   Olof Johansson
• [PATCH] ARM: appropriate __init annotation for const data   Olof Johansson
• [PATCH] ARM: nomadik: disable UART0 on Nomadik boards   Olof Johansson
• [PATCH] ARM: appropriate __init annotation for const data   Olof Johansson
• [GIT PULL] STi defconfig updates for v4.3, round 1   Olof Johansson
• [GIT PULL] STi DT changes for v4.3, round 1   Olof Johansson
• [GIT PULL]STi SoC changes for v4.3, round 1   Olof Johansson
• [GIT PULL] STM32 DT changes for v4.3 v2   Olof Johansson
• [GIT PULL] Second Round of Renesas ARM Based SoC Cleanup for v4.3   Olof Johansson
• [GIT PULL] Renesas ARM Based SoC Marzen Board Removal for v4.3   Olof Johansson
• [GIT PULL] Renesas ARM Based SoC Updates for v4.3   Olof Johansson
• [GIT PULL] Renesas ARM Based SoC Defconfig Updates for v4.3   Olof Johansson
• [GIT PULL 1/2] omap soc changes for v4.3   Olof Johansson
• [GIT PULL 2/2] omap dts changes for dm814x for v4.3   Olof Johansson
• [GIT PULL] pxa for v4.3 - v2   Olof Johansson
• [PATCH 0/3] ARM: UniPhier: update DTS and MAINTAINERS   Olof Johansson
• [PATCH v4 3/4] arm64: Add Broadcom iProc family support   Olof Johansson
• [GIT PULL] CSR prima2_defconfig fixes for 4.2   Olof Johansson
• [PATCH] ARM: multi_v7_defconfig: Select MX6UL and MX7D   Olof Johansson
• [GIT PULL] ARM: imx: fixes for 4.2, 2nd round   Olof Johansson
• [PATCH v5 0/4] Add Broadcom North Star 2 support   Olof Johansson
• [PATCH v3] ARM: appropriate __init annotation for const data   Olof Johansson
• [PATCH v3] ARM: kill off set_irq_flags usage   Olof Johansson
• [PATCH v5 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Olof Johansson
• [GIT PULL] ARM: mediatek: arm64 updates for v4.2   Olof Johansson
• [PULL REQUEST] ARM: mediatek: dts updates for v4.3   Olof Johansson
• [PULL REQUEST] ARM: mediatek: soc updates for v4.3   Olof Johansson
• [GIT PULL] SoCFPGA DTS updates for v4.3   Olof Johansson
• [GIT PULL] SoCFPGA updates for v4.3   Olof Johansson
• [PATCH] ARM: zx: Add power domains for ZX296702   Olof Johansson
• [PATCH v2] PCI: iproc: Fix BCMA dependency in Kconfig   Olof Johansson
• [PATCH 2/2] ARM: dts: keystone: fix dt bindings to use post div register for mainpll   Olof Johansson
• [PATCH 1/2] KVM: arm: rename pause into power_off   Andrew Jones
• [PATCH 2/2] kvm: arm/arm64: implement kvm_arm_[halt, resume]_guest   Andrew Jones
• [PATCH-V5 4/4] mfd: devicetree: bindings: Add new 88pm800 mfd binding   Lee Jones
• [PATCH] mfd: 880m80x: Make use of BIT() macro   Lee Jones
• [PATCH v2 7/9] ARM: multi_v7_defconfig: Enable support for PWM Regulators   Lee Jones
• [RESEND 00/10] regulator: pwm-regulator: Introduce continuous-mode   Lee Jones
• [RESEND 01/10] ARM: multi_v7_defconfig: Enable ST's PWM driver   Lee Jones
• [RESEND 02/10] ARM: multi_v7_defconfig: Enable ST's Power Reset driver   Lee Jones
• [RESEND 03/10] ARM: multi_v7_defconfig: Enable support for PWM Regulators   Lee Jones
• [RESEND 04/10] ARM: STi: STiH407: Move PWM nodes STiH407 => STiH407-family   Lee Jones
• [RESEND 05/10] ARM: STi: STiH407: Add PWM Regulator node   Lee Jones
• [RESEND 06/10] dt: regulator: pwm-regulator: Re-write bindings   Lee Jones
• [RESEND 07/10] regulator: pwm-regulator: Separate voltage-table initialisation   Lee Jones
• [RESEND 08/10] regulator: pwm-regulator: Add support for continuous-voltage   Lee Jones
• [RESEND 09/10] regulator: pwm-regulator: Simplify voltage to duty-cycle call   Lee Jones
• [RESEND 10/10] regulator: pwm-regulator: Don't assign structure attributes right away   Lee Jones
• [RESEND 00/10] regulator: pwm-regulator: Introduce continuous-mode   Lee Jones
• [PATCH v3 2/4] mfd: axp20x: Add missing registers, and mark more registers volatile   Lee Jones
• [PATCH v3 3/4] mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs   Lee Jones
• [PATCH-V5 3/4] mfd: 88pm800: Set default interrupt clear method   Lee Jones
• [PATCH-V5 1/4] mfd: 88pm800: Add device tree support   Lee Jones
• [PATCH-V5 2/4] mfd: 88pm800: Remove unnecessary protection around pdata   Lee Jones
• [PATCH-V5 4/4] mfd: devicetree: bindings: Add new 88pm800 mfd binding   Lee Jones
• [PATCH-V5 3/4] mfd: 88pm800: Set default interrupt clear method   Lee Jones
• [linux-sunxi] Re: [PATCH v3 3/4] mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs   Lee Jones
• [PATCH-V5 3/4] mfd: 88pm800: Set default interrupt clear method   Lee Jones
• [RESEND 00/10] regulator: pwm-regulator: Introduce continuous-mode   Lee Jones
• [PATCH-V5 3/4] mfd: 88pm800: Set default interrupt clear method   Lee Jones
• [RESEND 09/10] regulator: pwm-regulator: Simplify voltage to duty-cycle call   Lee Jones
• [RESEND 08/10] regulator: pwm-regulator: Add support for continuous-voltage   Lee Jones
• [RESEND 09/10] regulator: pwm-regulator: Simplify voltage to duty-cycle call   Lee Jones
• [PATCH-V5 3/4] mfd: 88pm800: Set default interrupt clear method   Lee Jones
• [PATCH v2 0/9] regulator: pwm-regulator: Introduce continuous-mode   Lee Jones
• [PATCH v2 1/9] ARM: multi_v7_defconfig: Enable ST's PWM driver   Lee Jones
• [PATCH v2 2/9] ARM: multi_v7_defconfig: Enable ST's Power Reset driver   Lee Jones
• [PATCH v2 3/9] ARM: multi_v7_defconfig: Enable support for PWM Regulators   Lee Jones
• [PATCH v2 4/9] ARM: STi: STiH407: Move PWM nodes STiH407 => STiH407-family   Lee Jones
• [PATCH v2 5/9] ARM: STi: STiH407: Add PWM Regulator node   Lee Jones
• [PATCH v2 6/9] regulator: pwm-regulator: Re-write bindings   Lee Jones
• [PATCH v2 7/9] regulator: pwm-regulator: Add support for continuous-voltage   Lee Jones
• [PATCH v2 8/9] regulator: pwm-regulator: Simplify voltage to duty-cycle call   Lee Jones
• [PATCH v2 9/9] regulator: pwm-regulator: Don't assign structure attributes right away   Lee Jones
• [PATCH v2 0/9] cpufreq: Introduce support for ST's cpufreq functionality   Lee Jones
• [PATCH v2 0/9] regulator: pwm-regulator: Introduce continuous-mode   Lee Jones
• [PATCH 1/3] regulator: 88pm800: Add 88pm860 regulator support   Lee Jones
• [PATCH 1/3] regulator: pwm-regulator: Ensure headings aren't confused with properties   Lee Jones
• [PATCH 2/3] regulator: pwm-regulator: Remove obsoleted property   Lee Jones
• [PATCH 3/3] regulator: pwm-regulator: Small clean-ups   Lee Jones
• [PATCH v2 0/9] regulator: pwm-regulator: Introduce continuous-mode   Lee Jones
• [PATCH v2 0/9] regulator: pwm-regulator: Introduce continuous-mode   Lee Jones
• [PATCH] mfd: Drop owner assignment from i2c_drivers   Lee Jones
• [PATCH 1/3] regulator: pwm-regulator: Fix 'unused-variable' warning   Lee Jones
• [PATCH 2/3] regulator: pwm-regulator: Fix 'used uninitialized' warning   Lee Jones
• [PATCH 3/3] regulator: pwm-regulator: Fix ' comparison between signed and unsigned integer' warning   Lee Jones
• [PATCH v3 1/2] ARM: dts: Add binding documentation for AXP152 PMIC   Lee Jones
• [PATCH v3 2/2] mfd: axp20x: Add axp152 support   Lee Jones
• [PATCH 0/6] Mailbox: Provide support STi based platforms   Lee Jones
• [PATCH 1/6] mailbox: dt: Supply bindings for ST's Mailbox IP   Lee Jones
• [PATCH 2/6] mailbox: dt-bindings: Add shared [driver <=> device tree] defines   Lee Jones
• [PATCH 3/6] mailbox: Add support for ST's Mailbox IP   Lee Jones
• [PATCH 4/6] ARM: STi: stih407-family: Add nodes for Mailbox   Lee Jones
• [PATCH 5/6] mailbox: Add generic mechanism for testing Mailbox Controllers   Lee Jones
• [PATCH 6/6] ARM: STi: DT: STiH407: Enable Mailbox testing facility   Lee Jones
• [PATCH 4/5] regulator: 88pm800: Add 88pm860 regulator support   Lee Jones
• [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding   Lee Jones
• [PATCH v2 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property   Lee Jones
• [PATCH v4 1/2] mfd: devicetree: add bindings for Atmel Flexcom   Lee Jones
• [PATCH v4 2/2] mfd: flexcom: add a driver for Atmel Flexible Serial Communication Unit   Lee Jones
• [PATCH 4/5] regulator: 88pm800: Add 88pm860 regulator support   Lee Jones
• [PATCH v3 1/1] dt: cpufreq: st: Provide bindings for ST's CPUFreq implementation   Lee Jones
• [PATCH 3/6] mailbox: Add support for ST's Mailbox IP   Lee Jones
• [PATCH v4 1/2] mfd: devicetree: add bindings for Atmel Flexcom   Lee Jones
• [PATCH-v3] mfd: 88pm80x: Add 88pm860 chip type support   Lee Jones
• [PATCH 4/5] regulator: 88pm800: Add 88pm860 regulator support   Lee Jones
• [PATCH 3/6] mailbox: Add support for ST's Mailbox IP   Lee Jones
• [PATCH 4/5] regulator: 88pm800: Add 88pm860 regulator support   Lee Jones
• [PATCH 3/6] mailbox: Add support for ST's Mailbox IP   Lee Jones
• [PATCH v7 0/5] clk: Provide support for always-on clocks   Lee Jones
• [PATCH v7 1/5] ARM: sti: stih407-family: Supply defines for CLOCKGEN A0   Lee Jones
• [PATCH v7 2/5] ARM: sti: stih410-clocks: Identify critical clocks   Lee Jones
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Lee Jones
• [PATCH v7 4/5] clk: Provide critical clock support   Lee Jones
• [PATCH v7 5/5] clk: dt: Introduce binding for critical clock support   Lee Jones
• [PATCH v6 2/2] mfd: atmel-flexcom: add a driver for Atmel Flexible Serial Communication Unit   Lee Jones
• [PATCH v6 1/2] mfd: devicetree: add bindings for Atmel Flexcom   Lee Jones
• [PATCH 3/6] mailbox: Add support for ST's Mailbox IP   Lee Jones
• [PATCH v6 2/2] mfd: atmel-flexcom: add a driver for Atmel Flexible Serial Communication Unit   Lee Jones
• [PATCH v3 1/1] dt: cpufreq: st: Provide bindings for ST's CPUFreq implementation   Lee Jones
• [PATCH 1/2] MAINTAINERS: add Device Tree binding doc for max77686 regulator   Lee Jones
• [PATCH 2/2] MAINTAINERS: add an entry for the Maxim MAX77802 PMIC drivers   Lee Jones
• [PATCH v3] mfd: atmel-hlcdc: implement config synchronization   Lee Jones
• [PATCH v2 3/4] mfd: Add DT binding for Maxim MAX77802 IC   Lee Jones
• [PATCH 4/4] mfd: 88pm800: Add support for clk subdevice   Lee Jones
• [PATCH 1/4] mfd: 88pm800: Update the header file with 32K clk related macros   Lee Jones
• [PATCH-v2 1/2] mfd: devicetree: bindings: 88pm800: Add DT property for dual phase enable   Lee Jones
• [PATCH-v2 2/2] regulator: 88pm800: Add support for configuration of dual phase on BUCK1   Lee Jones
• [PATCH v7 2/2] mfd: atmel-flexcom: add a driver for Atmel Flexible Serial Communication Unit   Lee Jones
• [PATCH 3/6] mailbox: Add support for ST's Mailbox IP   Lee Jones
• [PATCH 3/6] mailbox: Add support for ST's Mailbox IP   Lee Jones
• [PATCH v6 2/2] mfd: atmel-flexcom: add a driver for Atmel Flexible Serial Communication Unit   Lee Jones
• [PATCH v7 1/2] mfd: devicetree: add bindings for Atmel Flexcom   Lee Jones
• [PATCH v7 1/2] mfd: devicetree: add bindings for Atmel Flexcom   Lee Jones
• [PATCH v8 1/2] mfd: devicetree: add bindings for Atmel Flexcom   Lee Jones
• [PATCH v4 6/8] ARM: bcm2835: Use the RPi firmware clocks for uart.   Lee Jones
• [PATCH v4 8/8] ARM: bcm2835: Use the firmware on rpi to get the EMMC clock.   Lee Jones
• [PATCH v4 4/8] ARM: bcm2835: Drop never-used clock-frequency property of uart0.   Lee Jones
• [PATCH v4 3/8] ARM: bcm2835: Add DT for the firmware clocks driver.   Lee Jones
• [PATCH v4 7/8] ARM: bcm2835: Tie SPI clock to the core clock rate.   Lee Jones
• [PATCH v7 1/3] dt/bindings: Add binding for the Raspberry Pi firmware driver   Lee Jones
• [PATCH v7 3/3] ARM: bcm2835: Add the firmware driver information to the RPi DT   Lee Jones
• [PATCH v3 1/7] dt/bindings: Add binding for the Raspberry Pi clock provider   Lee Jones
• [PATCH v7 5/5] clk: dt: Introduce binding for critical clock support   Lee Jones
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Lee Jones
• [PATCH v2 0/6] Mailbox: Provide support STi based platforms   Lee Jones
• [PATCH v2 1/6] mailbox: dt: Supply bindings for ST's Mailbox IP   Lee Jones
• [PATCH v2 2/6] mailbox: dt-bindings: Add shared [driver <=> device tree] defines   Lee Jones
• [PATCH v2 3/6] mailbox: Add support for ST's Mailbox IP   Lee Jones
• [PATCH v2 4/6] ARM: STi: stih407-family: Add nodes for Mailbox   Lee Jones
• [PATCH v2 5/6] mailbox: Add generic mechanism for testing Mailbox Controllers   Lee Jones
• [PATCH v2 6/6] ARM: STi: DT: STiH407: Enable Mailbox testing facility   Lee Jones
• [PATCH v4 1/2] dt: cpufreq: st: Provide bindings for ST's CPUFreq implementation   Lee Jones
• [PATCH v4 2/2] dt: power: st: Provide bindings for ST's OPPs   Lee Jones
• [PATCH v3] mfd: kill off set_irq_flags usage   Lee Jones
• [PATCH v4 2/2] dt: power: st: Provide bindings for ST's OPPs   Lee Jones
• [PATCH v4 1/2] dt: cpufreq: st: Provide bindings for ST's CPUFreq implementation   Lee Jones
• [PATCH v4 2/2] dt: power: st: Provide bindings for ST's OPPs   Lee Jones
• [PATCH v4 1/2] dt: cpufreq: st: Provide bindings for ST's CPUFreq implementation   Lee Jones
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Lee Jones
• [PATCH v4 2/2] dt: power: st: Provide bindings for ST's OPPs   Lee Jones
• [PATCH v4 2/2] dt: power: st: Provide bindings for ST's OPPs   Lee Jones
• [PATCH v4 2/2] dt: power: st: Provide bindings for ST's OPPs   Lee Jones
• [PATCH v4 2/2] dt: power: st: Provide bindings for ST's OPPs   Lee Jones
• [PATCH v7 0/5] clk: Provide support for always-on clocks   Lee Jones
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Lee Jones
• [PATCH v7 5/5] clk: dt: Introduce binding for critical clock support   Lee Jones
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Lee Jones
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Lee Jones
• [PATCH v2 3/6] mailbox: Add support for ST's Mailbox IP   Lee Jones
• [PATCH v2 3/6] mailbox: Add support for ST's Mailbox IP   Lee Jones
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Lee Jones
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Lee Jones
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Lee Jones
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Lee Jones
• [PATCH] PCI: xilinx: Add check for MSI interrupt flag before handling as INTx   Russell Joyce
• [PATCH] PCI: xilinx: Add check for MSI interrupt flag before handling as INTx   Russell Joyce
• [PATCH 0/4] spi: davinci: Improve prescaler limit support   Franklin S Cooper Jr
• [PATCH 1/4] spi: davinci: Set prescale value based on register value   Franklin S Cooper Jr
• [PATCH 2/4] spi: davinci: Choose correct pre-scaler limit based on SOC   Franklin S Cooper Jr
• [PATCH 3/4] ARM: davinci: Set proper SPI prescale limit value   Franklin S Cooper Jr
• [PATCH 4/4] ARM: dts: keystone: Add ti,keystone-spi for SPI   Franklin S Cooper Jr
• [RESEND][PATCH 0/4] spi: davinci: Improve prescaler limit support   Franklin S Cooper Jr
• [RESEND][PATCH 1/4] spi: davinci: Set prescale value based on register value   Franklin S Cooper Jr
• [RESEND][PATCH 2/4] spi: davinci: Choose correct pre-scaler limit based on SOC   Franklin S Cooper Jr
• [RESEND][PATCH 3/4] ARM: davinci: Set proper SPI prescale limit value   Franklin S Cooper Jr
• [RESEND][PATCH 4/4] ARM: dts: keystone: Add ti,keystone-spi for SPI   Franklin S Cooper Jr
• [PATCH 0/4] Add Broadcom North Star 2 support   Ray Jui
• [PATCH 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Ray Jui
• [PATCH 2/4] PCI: iproc: Fix ARM64 dependency in Kconfig   Ray Jui
• [PATCH 3/4] arm64: Add Broadcom's North Star 2 support   Ray Jui
• [PATCH 4/4] arm64: dts: Add Broadcom North Star 2 support   Ray Jui
• [PATCH] PCI-iproc: Delete unnecessary checks before two function calls   Ray Jui
• [PATCH] PCI-iproc: Delete unnecessary checks before two function calls   Ray Jui
• [PATCH 3/4] arm64: Add Broadcom's North Star 2 support   Ray Jui
• [PATCH 4/4] arm64: dts: Add Broadcom North Star 2 support   Ray Jui
• [PATCH v2 0/4] Add Broadcom North Star 2 support   Ray Jui
• [PATCH v2 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Ray Jui
• [PATCH v2 2/4] PCI: iproc: Fix ARM64 dependency in Kconfig   Ray Jui
• [PATCH v2 3/4] arm64: Add Broadcom iProc family support   Ray Jui
• [PATCH v2 4/4] arm64: dts: Add Broadcom North Star 2 support   Ray Jui
• [PATCH v2 4/4] arm64: dts: Add Broadcom North Star 2 support   Ray Jui
• [PATCH v2 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Ray Jui
• [PATCH v2 3/4] arm64: Add Broadcom iProc family support   Ray Jui
• [PATCH v3 0/4] Add Broadcom North Star 2 support   Ray Jui
• [PATCH v3 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Ray Jui
• [PATCH v3 2/4] PCI: iproc: Fix ARM64 dependency in Kconfig   Ray Jui
• [PATCH v3 3/4] arm64: Add Broadcom iProc family support   Ray Jui
• [PATCH v3 4/4] arm64: dts: Add Broadcom North Star 2 support   Ray Jui
• [PATCH v3 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Ray Jui
• [PATCH v3 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Ray Jui
• [PATCH v3 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Ray Jui
• [PATCH v4 0/4] Add Broadcom North Star 2 support   Ray Jui
• [PATCH v4 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Ray Jui
• [PATCH v4 2/4] PCI: iproc: Fix ARM64 dependency in Kconfig   Ray Jui
• [PATCH v4 3/4] arm64: Add Broadcom iProc family support   Ray Jui
• [PATCH v4 4/4] arm64: dts: Add Broadcom North Star 2 support   Ray Jui
• [PATCH v4 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Ray Jui
• [PATCH v4 3/4] arm64: Add Broadcom iProc family support   Ray Jui
• [PATCH v4 3/4] arm64: Add Broadcom iProc family support   Ray Jui
• [PATCH v5 0/4] Add Broadcom North Star 2 support   Ray Jui
• [PATCH v5 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Ray Jui
• [PATCH v5 2/4] PCI: iproc: Fix ARM64 dependency in Kconfig   Ray Jui
• [PATCH v5 3/4] arm64: Add Broadcom iProc family support   Ray Jui
• [PATCH v5 4/4] arm64: dts: Add Broadcom North Star 2 support   Ray Jui
• [PATCH v5 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Ray Jui
• [PATCH] PCI: iproc: Fix BCMA dependency in Kconfig   Ray Jui
• [PATCH] PCI: iproc: Fix BCMA dependency in Kconfig   Ray Jui
• [PATCH v2] PCI: iproc: Fix BCMA dependency in Kconfig   Ray Jui
• [PATCH v3 0/3] IRQ/Gic-V3:Support Mbigen interrupt controller   Ma Jun
• [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller   Ma Jun
• [PATCH v3 2/3] IRQ/Gic-V3: Change arm-gic-its to support the Mbigen interrupt   Ma Jun
• [PATCH v3 3/3] dt-binding:Documents the mbigen bindings   Ma Jun
• [PATCH 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Greg KH
• [PATCH 02/10] usb: chipidea: define stream mode disable for both roles   Greg KH
• [PATCH 02/10] usb: chipidea: define stream mode disable for both roles   Greg KH
• macb: zynq: why is SG disabled?   Punnaiah Choudary Kalluri
• [PATCH v3 1/2] Documentation: dt: Add Xilinx zynqmp dma device tree binding documentation   Punnaiah Choudary Kalluri
• [PATCH v3 2/2] dma: Add Xilinx zynqmp dma engine driver support   Punnaiah Choudary Kalluri
• [PATCH] ARM: mvebu: fix GPIO config on the Linksys boards   Imre Kaloz
• [PATCH v7 0/9] Add simple NVMEM Framework via regmap.   Srinivas Kandagatla
• [PATCH v7 1/9] nvmem: Add a simple NVMEM framework for nvmem providers   Srinivas Kandagatla
• [PATCH v7 2/9] nvmem: Add a simple NVMEM framework for consumers   Srinivas Kandagatla
• [PATCH v7 3/9] nvmem: Add nvmem_device based consumer apis.   Srinivas Kandagatla
• [PATCH v7 4/9] nvmem: Add bindings for simple nvmem framework   Srinivas Kandagatla
• [PATCH v7 5/9] Documentation: nvmem: add nvmem api level and how-to doc   Srinivas Kandagatla
• [PATCH v7 6/9] nvmem: qfprom: Add Qualcomm QFPROM support.   Srinivas Kandagatla
• [PATCH v7 7/9] nvmem: qfprom: Add bindings for qfprom   Srinivas Kandagatla
• [PATCH v7 8/9] nvmem: sunxi: Move the SID driver to the nvmem framework   Srinivas Kandagatla
• [PATCH v7 9/9] nvmem: Add to MAINTAINERS for nvmem framework   Srinivas Kandagatla
• [PATCH v7 1/9] nvmem: Add a simple NVMEM framework for nvmem providers   Srinivas Kandagatla
• [PATCH v7 4/9] nvmem: Add bindings for simple nvmem framework   Srinivas Kandagatla
• [PATCH v7 2/9] nvmem: Add a simple NVMEM framework for consumers   Srinivas Kandagatla
• [PATCH v7 0/9] Add simple NVMEM Framework via regmap.   Srinivas Kandagatla
• [PATCH v7 0/9] Add simple NVMEM Framework via regmap.   Srinivas Kandagatla
• [PATCH v7 5/9] Documentation: nvmem: add nvmem api level and how-to doc   Srinivas Kandagatla
• [PATCH v7 6/9] nvmem: qfprom: Add Qualcomm QFPROM support.   Srinivas Kandagatla
• [PATCH v7 3/9] nvmem: Add nvmem_device based consumer apis.   Srinivas Kandagatla
• [PATCH v8 0/9] Add simple NVMEM Framework via regmap.   Srinivas Kandagatla
• [PATCH v8 1/9] nvmem: Add a simple NVMEM framework for nvmem providers   Srinivas Kandagatla
• [PATCH v8 2/9] nvmem: Add a simple NVMEM framework for consumers   Srinivas Kandagatla
• [PATCH v8 3/9] nvmem: Add nvmem_device based consumer apis.   Srinivas Kandagatla
• [PATCH v8 4/9] nvmem: Add bindings for simple nvmem framework   Srinivas Kandagatla
• [PATCH v8 5/9] Documentation: nvmem: add nvmem api level and how-to doc   Srinivas Kandagatla
• [PATCH v8 6/9] nvmem: qfprom: Add Qualcomm QFPROM support.   Srinivas Kandagatla
• [PATCH v8 7/9] nvmem: qfprom: Add bindings for qfprom   Srinivas Kandagatla
• [PATCH v8 8/9] nvmem: sunxi: Move the SID driver to the nvmem framework   Srinivas Kandagatla
• [PATCH v8 9/9] nvmem: Add to MAINTAINERS for nvmem framework   Srinivas Kandagatla
• [PATCH v8 1/9] nvmem: Add a simple NVMEM framework for nvmem providers   Srinivas Kandagatla
• [PATCH v8 6/9] nvmem: qfprom: Add Qualcomm QFPROM support.   Srinivas Kandagatla
• [PATCH v8 1/9] nvmem: Add a simple NVMEM framework for nvmem providers   Srinivas Kandagatla
• [PATCH v8 1/9] nvmem: Add a simple NVMEM framework for nvmem providers   Srinivas Kandagatla
• [PATCH v8 1/9] nvmem: Add a simple NVMEM framework for nvmem providers   Srinivas Kandagatla
• [PATCH v8 2/9] nvmem: Add a simple NVMEM framework for consumers   Srinivas Kandagatla
• [PATCH v8 8/9] nvmem: sunxi: Move the SID driver to the nvmem framework   Srinivas Kandagatla
• [PATCH v8 8/9] nvmem: sunxi: Move the SID driver to the nvmem framework   Srinivas Kandagatla
• [PATCH v8 1/9] nvmem: Add a simple NVMEM framework for nvmem providers   Srinivas Kandagatla
• [PATCH v9 0/9] Add simple NVMEM Framework via regmap.   Srinivas Kandagatla
• [PATCH v9 1/9] nvmem: Add a simple NVMEM framework for nvmem providers   Srinivas Kandagatla
• [PATCH v9 2/9] nvmem: Add a simple NVMEM framework for consumers   Srinivas Kandagatla
• [PATCH v9 3/9] nvmem: Add nvmem_device based consumer apis.   Srinivas Kandagatla
• [PATCH v9 4/9] nvmem: Add bindings for simple nvmem framework   Srinivas Kandagatla
• [PATCH v9 5/9] Documentation: nvmem: add nvmem api level and how-to doc   Srinivas Kandagatla
• [PATCH v9 6/9] nvmem: qfprom: Add Qualcomm QFPROM support.   Srinivas Kandagatla
• [PATCH v9 7/9] nvmem: qfprom: Add bindings for qfprom   Srinivas Kandagatla
• [PATCH v9 8/9] nvmem: sunxi: Move the SID driver to the nvmem framework   Srinivas Kandagatla
• [PATCH v9 9/9] nvmem: Add to MAINTAINERS for nvmem framework   Srinivas Kandagatla
• [PATCH v1 0/7] APQ8064 dt patches.   Srinivas Kandagatla
• [PATCH v1 1/7] ARM: dts: apq8064: remove temporary fixed regulator for mmc   Srinivas Kandagatla
• [PATCH v1 2/7] ARM: dts: ifc6410: add real regulators for sdcc nodes.   Srinivas Kandagatla
• [PATCH v1 3/7] ARM: dts: qs600: Add real regulators to sdcc   Srinivas Kandagatla
• [PATCH v1 4/7] ARM: dts: apq8064: Add pm8921 mfd and its gpio node   Srinivas Kandagatla
• [PATCH v1 5/7] ARM: dts: apq8064: add pm8921 mpp support   Srinivas Kandagatla
• [PATCH v1 6/7] ARM: dts: apq8064: Add DT support for GSBI6 and for UART pin mux   Srinivas Kandagatla
• [PATCH v1 7/7] ARM: dts: apq8064: fix missing gsbi cell-index   Srinivas Kandagatla
• [PATCH v1 2/7] ARM: dts: ifc6410: add real regulators for sdcc nodes.   Srinivas Kandagatla
• [PATCH v2 0/3] DT: APQ8064 remove mmc fixed regulators.   Srinivas Kandagatla
• [PATCH v2 1/3] ARM: dts: apq8064: remove temporary fixed regulator for mmc   Srinivas Kandagatla
• [PATCH v2 2/3] ARM: dts: ifc6410: add real regulators for sdcc nodes.   Srinivas Kandagatla
• [PATCH v2 3/3] ARM: dts: qs600: Add real regulators to sdcc   Srinivas Kandagatla
• [PATCH v1 0/7] DT: APQ8064 for qcom-dt-next   Srinivas Kandagatla
• [PATCH v1 1/7] ARM: dts: ifc6410: Add pwrseq support for WLAN   Srinivas Kandagatla
• [PATCH v1 2/7] ARM: dts: qs600: add pwrseq support to WLAN   Srinivas Kandagatla
• [PATCH v1 3/7] ARM: dts: apq8064-ifc6410: add heart-beat led support.   Srinivas Kandagatla
• [PATCH v1 4/7] ARM: dts: apq8064: Add MDP support   Srinivas Kandagatla
• [PATCH v1 5/7] ARM: dts: ifc6410: enable MDP support   Srinivas Kandagatla
• [PATCH v1 6/7] ARM: dts: qs600: enable MDP support   Srinivas Kandagatla
• [PATCH v1 7/7] ARM: dts: ifc6410: add inforce LVDS panel support   Srinivas Kandagatla
• [PATCH v9 0/9] Add simple NVMEM Framework via regmap.   Srinivas Kandagatla
• [PATCH v1 3/7] ARM: dts: apq8064-ifc6410: add heart-beat led support.   Srinivas Kandagatla
• [PATCH v1 7/7] ARM: dts: ifc6410: add inforce LVDS panel support   Srinivas Kandagatla
• [PATCH v5 2/6] arch: unify ioremap prototypes and macro aliases   Toshi Kani
• [PATCH v5 2/6] arch: unify ioremap prototypes and macro aliases   Toshi Kani
• [PATCH v2 04/25] mm: enhance region_is_ram() to distinguish 'unknown' vs 'mixed'   Toshi Kani
• [PATCH v2 08/25] arch: introduce memremap()   Toshi Kani
• [PATCH v2 08/25] arch: introduce memremap()   Toshi Kani
• [PATCH v2 08/25] arch: introduce memremap()   Toshi Kani
• [PATCH] drivers/usb/: Simplify return statements   Karajgaonkar, Saurabh (S.)
• [PATCH] drivers/usb/: Simplify return statements   Karajgaonkar, Saurabh (S.)
• [PATCH] ARM: keystone: allow FORCE_MAX_ZONEORDER to be configurable on Keystone   Murali Karicheri
• [PATCH] ARM: keystone: allow FORCE_MAX_ZONEORDER to be configurable on Keystone   Murali Karicheri
• [PATCH] ARM: keystone: dts: disable pcie dt bindings by default   Murali Karicheri
• arm: dts: update for 4.2-rcx   Murali Karicheri
• arm: dts: update for 4.2-rcx   Murali Karicheri
• arm: dts: update for 4.2-rcx   Murali Karicheri
• [PATCH v1] ARM: pci: add call to pcie_bus_configure_settings()   Murali Karicheri
• [PATCH v1 1/2] ARM: keystone: dts: fix dt bindings for PCIe   Murali Karicheri
• [PATCH v1 2/2] ARM: keystone: dts: rename pcie nodes to help override status   Murali Karicheri
• [PATCH v1 1/2] ARM: keystone: dts: fix dt bindings for PCIe   Murali Karicheri
• [PATCH] ARM/PCI: set MPS before pci_bus_add_devices()   Murali Karicheri
• [PATCH] ARM/PCI: set MPS before pci_bus_add_devices()   Murali Karicheri
• [PATCH 2/2] ARM: dts: keystone: fix dt bindings to use post div register for mainpll   Murali Karicheri
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller   Harini Katakam
• [PATCH 0/3] kexec: crash_kexec_post_notifiers boot option related fixes   Hidehiro Kawai
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   Hidehiro Kawai
• [PATCH 3/3] kexec: Change the timing of callbacks related to "crash_kexec_post_notifiers" boot option   Hidehiro Kawai
• [PATCH 2/3] kexec: Pass panic message to crash_kexec()   Hidehiro Kawai
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   Hidehiro Kawai
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   Hidehiro Kawai
• [PATCHv5] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Kukjin Kim
• [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board   Kukjin Kim
• [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250   Kukjin Kim
• [PATCH] serial: samsung: Remove redundant DEBUG_LL check   Kukjin Kim
• [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Kukjin Kim
• [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Kukjin Kim
• [GIT PULL] ARM: EXYNOS: dts: Fixes for 4.2   Kukjin Kim
• [GIT PULL] ARM: EXYNOS: dts: Fixes for 4.2   Kukjin Kim
• [PATCH] ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs   Kukjin Kim
• [GIT PULL] Samsung 1st fixes for v4.2   Kukjin Kim
• [GIT PULL] ARM: EXYNOS: dts: Improvements for 4.3   Kukjin Kim
• [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3   Kukjin Kim
• [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3   Kukjin Kim
• [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3   Kukjin Kim
• [GIT PULL] Samsung 1st fixes for v4.2   Kukjin Kim
• [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250   Kukjin Kim
• [PATCH v3 1/4] clk: samsung: exynos5250: add cpu clock configuration data and instantiate cpu clock   Kukjin Kim
• [PATCH v6 1/3] clk: samsung: exynos3250: Add cpu clock configuration data and instaniate cpu clock   Kukjin Kim
• [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250   Kukjin Kim
• [GIT PULL] Non-critical fixes for v4.3   Kukjin Kim
• [GIT PULL] ARM: defconfig: Improvements for 4.3   Kukjin Kim
• [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250   Kukjin Kim
• [PATCH v3] ARM: dts: Add SPI CS on exynos5250-snow   Kukjin Kim
• [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Kukjin Kim
• [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board   Kukjin Kim
• [RFC PATCH 0/3] clocksource: exynos_mct: allow mct to use 64-bit counter from coprocessor   Kukjin Kim
• [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes   Kukjin Kim
• [PATCH] ARM: fix DEBUG_SET_MODULE_RONX build dependencies   Russell King
• [PATCH] ARM: add help text for HIGHPTE configuration entry   Russell King
• [PATCH] ARM: add helpful message when truncating physical memory   Russell King
• [PATCH 1/4] ARM: move heavy barrier support out of line   Russell King
• [PATCH 2/4] ARM: add soc memory barrier extension   Russell King
• [PATCH 3/4] Revert "ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688"   Russell King
• [PATCH 4/4] ARM: omap2: restore OMAP4 barrier behaviour   Russell King
• [PATCH 1/8] pcmcia: sa11x0: fix missing clk_put() in sa11x0 socket drivers   Russell King
• [PATCH 2/8] pcmcia: sa11x0: convert memory allocation to devm_* API   Russell King
• [PATCH 3/8] pcmcia: pxa2xx: update socket driver to use devm_clk_get() API   Russell King
• [PATCH 4/8] pcmcia: pxa2xx: convert memory allocation to devm_* API   Russell King
• [PATCH 5/8] pcmcia: sa1111: update socket driver to use devm_clk_get() API   Russell King
• [PATCH 6/8] pcmcia: sa1111: simplify clk handing in sa1111_pcmcia_add()   Russell King
• [PATCH 7/8] pcmcia: sa11xx_base.c: remove useless init/exit functions   Russell King
• [PATCH 8/8] pcmcia: soc_common: remove skt_dev_info's clk pointer   Russell King
• [PATCH 1/7] dt-bindings: add Marvell PMU documentation   Russell King
• [PATCH 2/7] ARM: dt: Add PMU node, making PMU child devices childs of this node   Russell King
• [PATCH 3/7] ARM: dove: create a proper PMU driver for power domains, PMU IRQs and resets   Russell King
• [PATCH 4/7] ARM: dt: dove: wire up RTC interrupt   Russell King
• [PATCH 5/7] ARM: dt: dove: add video decoder power domain description   Russell King
• [PATCH 6/7] ARM: dt: dove: add GPU power domain description   Russell King
• [PATCH 7/7] ARM: dove: convert legacy dove to PMU support   Russell King
• [PATCH 1/3] nmi: create generic NMI backtrace implementation   Russell King
• [PATCH 2/3] nmi: x86: convert to generic nmi handler   Russell King
• [PATCH 3/3] ARM: add basic support for on-demand backtrace of other CPUs   Russell King
• [PATCH 01/18] ARM: reduce visibility of dmac_* functions   Russell King
• [PATCH 02/18] firmware: qcom_scm-32: replace open-coded call to __cpuc_flush_dcache_area()   Russell King
• [PATCH 03/18] iommu: tegra-smmu: fix iova_to_phys() method   Russell King
• [PATCH 04/18] iommu: tegra-smmu: fix unmap() method   Russell King
• [PATCH 05/18] iommu: tegra-smmu: factor out common pte setting   Russell King
• [PATCH 06/18] iommu: tegra-smmu: add iova_pd_index() and iova_pt_index() helpers   Russell King
• [PATCH 07/18] iommu: tegra-smmu: fix page table lookup in unmap/iova_to_phys methods   Russell King
• [PATCH 08/18] iommu: tegra-smmu: store struct page pointer for page tables   Russell King
• [PATCH 09/18] iommu: tegra-smmu: use kcalloc() to allocate counter array   Russell King
• [PATCH 10/18] iommu: tegra-smmu: move flush_dcache to tegra-smmu.c   Russell King
• [PATCH 11/18] iommu: tegra-smmu: split smmu_flush_ptc()   Russell King
• [PATCH 12/18] iommu: tegra-smmu: smmu_flush_ptc() wants device address   Russell King
• [PATCH 13/18] iommu: tegra-smmu: convert to use DMA API   Russell King
• [PATCH 14/18] iommu: tegra-smmu: remove PageReserved manipulation   Russell King
• [PATCH 15/18] iommu: tegra-smmu: use __GFP_ZERO to allocate zeroed pages   Russell King
• [PATCH 16/18] iommu: tegra-smmu: get_use   Russell King
• [PATCH 17/18] iommu: tegra-smmu: more cleanups   Russell King
• [PATCH 18/18] iommu: tegra-smmu: remove cacheflush.h   Russell King
• [RFC PATCH] KVM: arm/arm64: Don't let userspace update CNTVOFF once guest is running   Jan Kiszka
• [PATCH v2] ARM: dts: i.MX35: Fix can support.   Marc Kleine-Budde
• [PATCH v2] ARM: dts: i.MX35: Fix can support.   Marc Kleine-Budde
• [RFC PATCH 05/15] pwm: introduce default period and polarity concepts   Uwe Kleine-König
• [RFC PATCH 00/15] pwm: add support for atomic update   Uwe Kleine-König
• [RFC PATCH 00/15] pwm: add support for atomic update   Uwe Kleine-König
• [PATCH v2 5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery   Uwe Kleine-König
• [PATCH] pinctrl: imx1-core: Fix debug output pin array index   Uwe Kleine-König
• [PATCH] pinctrl: imx1-core: Fix debug output pin array index   Uwe Kleine-König
• [PATCH-v3 04/11] i2c: pxa: Remove compile warnning in 64bit mode   Uwe Kleine-König
• [PATCH] Subject: pinctrl: imx1-core: Fix debug output in .pin_config_set callback   Uwe Kleine-König
• [PATCH 3/9] gpio: Allow hogged gpios to be requested   Uwe Kleine-König
• [PATCH 3/9] gpio: Allow hogged gpios to be requested   Uwe Kleine-König
• [PATCH 0/9] gpiolib: Add GPIO name support   Uwe Kleine-König
• [PATCH] ARM: dts: i.MX35: Fix can support   Uwe Kleine-König
• [PATCH] ARM: appropriate __init annotation for const data   Uwe Kleine-König
• [PATCH] ARM: tegra: Fix nyan-big panel binding   Steev Klimaszewski
• [PATCH] ARM: tegra: Fix nyan-big panel binding   Steev Klimaszewski
• [PATCH] ARM: tegra: Fix nyan-big panel binding   Steev Klimaszewski
• [PATCH v5 2/2] cpufreq: mediatek: Add MT8173 cpufreq driver   Alexey Klimov
• [PATCH v3 1/5] mm: kasan: introduce generic kasan_populate_zero_shadow()   Alexey Klimov
• [PATCH v3 0/5] KASAN for arm64   Alexey Klimov
• [PATCH 3/6] mailbox: Add support for ST's Mailbox IP   Alexey Klimov
• [RFC PATCH 0/3] clocksource: exynos_mct: allow mct to use 64-bit counter from coprocessor   Alexey Klimov
• [RFC PATCH 1/3] clocksource: exynos_mct: allow mct to read counter from coprocessor   Alexey Klimov
• [RFC PATCH 2/3] documentation: dt: mct: add desc of optional property use-cp15-phys-counter   Alexey Klimov
• [RFC PATCH 3/3] ARM: dts: add MCT property use-cp15-phys-counter for exynos5422-odroidxu3   Alexey Klimov
• [RFC PATCH 3/3] ARM: dts: add MCT property use-cp15-phys-counter for exynos5422-odroidxu3   Alexey Klimov
• [RFC PATCH 1/3] clocksource: exynos_mct: allow mct to read counter from coprocessor   Alexey Klimov
• [RFC PATCH 0/3] clocksource: exynos_mct: allow mct to use 64-bit counter from coprocessor   Alexey Klimov
• [RFC PATCH 0/3] clocksource: exynos_mct: allow mct to use 64-bit counter from coprocessor   Alexey Klimov
• [PATCH] lib: Make _find_next_bit helper function inline   Alexey Klimov
• [PATCH v2 6/9] arm: twr-k70f120m: extend Freescale eDMA driver with the ability to support Kinetis SoC   Vinod Koul
• [PATCH v2 3/3] dmaengine: at_xdmac: fix indentation   Vinod Koul
• [PATCH 1/1] dmaengine: Use Pointer xt after NULL check.   Vinod Koul
• [PATCH] dmaengine: at_xdmac: fix bug about channel configuration   Vinod Koul
• [PATCH linux-next v2 1/1] dmaengine: at_hdmac: fix residue computation   Vinod Koul
• [PATCH v2 1/1] dmaengine: at_xdmac: fix transfer data width in at_xdmac_prep_slave_sg()   Vinod Koul
• [PATCH 2/2] dmaengine: xdmac: Add scatter gathered memset support   Vinod Koul
• [PATCH v3 2/2] dma: Add Xilinx zynqmp dma engine driver support   Vinod Koul
• [PATCH] dmaengine: xgene-dma: Fix the resource map to handle overlapping   Vinod Koul
• [PATCH] dmaengine: sirf: fix kernel panic under one race condition   Vinod Koul
• [PATCH] dmaengine: fsl-edma: add PM suspend/resume support   Vinod Koul
• [PATCH v3 2/2] dma: Add Xilinx zynqmp dma engine driver support   Vinod Koul
• [PATCH 2/2] dmaengine: xdmac: Add scatter gathered memset support   Vinod Koul
• [PATCH v3 2/2] dma: Add Xilinx zynqmp dma engine driver support   Vinod Koul
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Vinod Koul
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Vinod Koul
• [PATCHv4 2/6] dmaengine: mv_xor: add suspend/resume support   Vinod Koul
• [PATCHv4 3/6] dmaengine: mv_xor: remove support for dmacap,* DT properties   Vinod Koul
• [PATCHv4 3/6] dmaengine: mv_xor: remove support for dmacap,* DT properties   Vinod Koul
• [PATCHv4 1/6] dmaengine: mv_xor: fix big endian operation in register mode   Vinod Koul
• [PATCH v3 2/4] ARM: dts: Exynos5250: add CPU OPP and regulator supply property   Krzysztof Kozlowski
• [PATCH v5 3/3] ARM: exynos: Add exynos3250 compatible to use generic cpufreq driver   Krzysztof Kozlowski
• [PATCH v5 2/3] ARM: dts: Add CPU OPP and regulator supply property for Exynos3250   Krzysztof Kozlowski
• [PATCH v5 1/3] clk: samsung: exynos3250: Add cpu clock configuration data and instaniate cpu clock   Krzysztof Kozlowski
• [PATCH] arm64: cpuidle: add __init section marker to arm_cpuidle_init   Krzysztof Kozlowski
• [PATCH v2] arm64: cpuidle: add __init section marker to arm_cpuidle_init   Krzysztof Kozlowski
• [PATCH v2] arm64: cpuidle: add __init section marker to arm_cpuidle_init   Krzysztof Kozlowski
• [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board   Krzysztof Kozlowski
• [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board   Krzysztof Kozlowski
• [PATCH] Documentation: ARM: EXYNOS: Extend boot loader interface documentation   Krzysztof Kozlowski
• [PATCHv4] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Krzysztof Kozlowski
• [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board   Krzysztof Kozlowski
• [PATCH] thermal: exynos: Disable the regulator on probe failure   Krzysztof Kozlowski
• [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC   Krzysztof Kozlowski
• [PATCH] thermal: exynos: Disable the regulator on probe failure   Krzysztof Kozlowski
• [PATCH] ARM: dts: exynos4: add DMA support for serial ports   Krzysztof Kozlowski
• [PATCHv5] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Krzysztof Kozlowski
• [PATCHv5] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Krzysztof Kozlowski
• [RESEND][PATCH v2] arm64:Modify the dump mem for 64 bit addresses   Krzysztof Kozlowski
• [PATCHv5] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Krzysztof Kozlowski
• [PATCH] arm:irqchip: IRQCHIP_DECLARE macro is now accessible   Krzysztof Kozlowski
• [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board   Krzysztof Kozlowski
• [PATCH 1/4] ARM: dts: Include exynos5250-pinctrl after the nodes were defined   Krzysztof Kozlowski
• [PATCH 3/4] ARM: dts: Include exynos5420-pinctrl after the nodes were defined   Krzysztof Kozlowski
• [PATCH 0/4] ARM: dts: Use labels instead of full paths for Exynos5 pinctrl nodes   Krzysztof Kozlowski
• [PATCH 2/4] ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths   Krzysztof Kozlowski
• [PATCH 4/4] ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths   Krzysztof Kozlowski
• [PATCH 0/4] ARM: dts: Use labels instead of full paths for Exynos5 pinctrl nodes   Krzysztof Kozlowski
• [PATCH 2/4] ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths   Krzysztof Kozlowski
• [PATCH] ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs   Krzysztof Kozlowski
• [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC   Krzysztof Kozlowski
• [PATCH 0/6] mfd: 88pm800: Add 88pm860 device support   Krzysztof Kozlowski
• [RFT PATCH] net: axienet: Fix devm_ioremap_resource return value check   Krzysztof Kozlowski
• [PATCH 0/6] mfd: 88pm800: Add 88pm860 device support   Krzysztof Kozlowski
• [PATCH v2 1/7] opp: add dev_pm_opp_get_turbo_mode_setting() helper   Krzysztof Kozlowski
• [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes   Krzysztof Kozlowski
• [PATCH] Drop owner assignment from i2c_driver (and platform left-overs)   Krzysztof Kozlowski
• [PATCH] ARM: EXYNOS: pmu: Drop owner assignment   Krzysztof Kozlowski
• [PATCH] Drop owner assignment from i2c_driver (and platform left-overs)   Krzysztof Kozlowski
• [PATCH] mfd: Drop owner assignment from i2c_drivers   Krzysztof Kozlowski
• [PATCH] Drop owner assignment from i2c_driver (and platform left-overs)   Krzysztof Kozlowski
• [PATCH 1/2] ASoC: Drop owner assignment from i2c_driver   Krzysztof Kozlowski
• [PATCH 2/2] ASoC: Drop owner assignment from platform_driver   Krzysztof Kozlowski
• [PATCH] Drop owner assignment from i2c_driver (and platform left-overs)   Krzysztof Kozlowski
• [PATCH] drm: Drop owner assignment from i2c_driver   Krzysztof Kozlowski
• [PATCH] Drop owner assignment from i2c_driver (and platform left-overs)   Krzysztof Kozlowski
• [PATCH 1/7] [media] dvb-frontends: Drop owner assignment from i2c_driver   Krzysztof Kozlowski
• [PATCH 2/7] [media] dvb-frontends: Drop owner assignment from platform_driver   Krzysztof Kozlowski
• [PATCH 3/7] [media] i2c: Drop owner assignment from i2c_driver   Krzysztof Kozlowski
• [PATCH 4/7] [media] platform: Drop owner assignment from i2c_driver   Krzysztof Kozlowski
• [PATCH 5/7] [media] radio: Drop owner assignment from i2c_driver   Krzysztof Kozlowski
• [PATCH 6/7] [media] tuners: Drop owner assignment from i2c_driver   Krzysztof Kozlowski
• [PATCH 7/7] [media] Drop owner assignment from i2c_driver   Krzysztof Kozlowski
• [PATCH] phy: Drop owner assignment from platform_driver   Krzysztof Kozlowski
• [PATCH] pinctrl: Drop owner assignment from platform_driver   Krzysztof Kozlowski
• [PATCH] soc: mediatek: Drop owner assignment from platform_driver   Krzysztof Kozlowski
• [PATCH] pci: Drop owner assignment from platform_driver   Krzysztof Kozlowski
• [PATCH] drm: Drop owner assignment from i2c_driver   Krzysztof Kozlowski
• [PATCH v2 3/7] cpufreq-dt: add turbo modes support   Krzysztof Kozlowski
• [PATCH v2 4/7] clk: samsung: exynos4x12: add cpu clock configuration data and instantiate cpu clock   Krzysztof Kozlowski
• [PATCH v2 5/7] ARM: dts: Exynos4x12: add CPU OPP and regulator supply property   Krzysztof Kozlowski
• [PATCH v2 6/7] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12   Krzysztof Kozlowski
• [PATCH v2 7/7] cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support   Krzysztof Kozlowski
• [PATCH] ARM: EXYNOS: Use IOMEM_ERR_PTR when function returns iomem   Krzysztof Kozlowski
• [PATCH] Drop owner assignment from i2c_driver (and platform left-overs)   Krzysztof Kozlowski
• [PATCH v2 1/2] drm/bridge: Drop owner assignment from i2c_driver   Krzysztof Kozlowski
• [PATCH v2 2/2] drm/rockchip: Drop owner assignment from platform_driver   Krzysztof Kozlowski
• [PATCH v2 4/7] clk: samsung: exynos4x12: add cpu clock configuration data and instantiate cpu clock   Krzysztof Kozlowski
• [PATCH v2 2/2] mfd: ax20x: Add axp152 support   Krzysztof Kozlowski
• [PATCH 0/6] mfd: 88pm800: Add 88pm860 device support   Krzysztof Kozlowski
• [PATCH 2/6] mfd: 88pm800: Add init time initial configuration support   Krzysztof Kozlowski
• [PATCH 1/6] mfd: 88pm80x: Add 88pm860 chip type support   Krzysztof Kozlowski
• [PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable   Krzysztof Kozlowski
• [PATCH 5/6] mfd: devicetree: bindings: 88pm800: Add DT property for dual phase enable   Krzysztof Kozlowski
• [PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable   Krzysztof Kozlowski
• [PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable   Krzysztof Kozlowski
• [PATCH 1/3] mfd: max77686: Don't suggest in binding to use a deprecated property   Krzysztof Kozlowski
• [PATCH 2/3] mfd: Add DT binding for Maxim MAX77802 IC   Krzysztof Kozlowski
• [PATCH 3/3] mfd: max77686: Split out regulator part from the DT binding   Krzysztof Kozlowski
• [PATCH 5/6] mfd: devicetree: bindings: 88pm800: Add DT property for dual phase enable   Krzysztof Kozlowski
• [PATCH 4/6] ARM: dts: Exynos4210: add CPU OPP and regulator supply property   Krzysztof Kozlowski
• [PATCH 4/6] ARM: dts: Exynos4210: add CPU OPP and regulator supply property   Krzysztof Kozlowski
• [GIT PULL] ARM: EXYNOS: dts: Fixes for 4.2   Krzysztof Kozlowski
• [PATCH 4/6] ARM: dts: Exynos4210: add CPU OPP and regulator supply property   Krzysztof Kozlowski
• [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Krzysztof Kozlowski
• [PATCH] serial: samsung: Remove redundant DEBUG_LL check   Krzysztof Kozlowski
• [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Krzysztof Kozlowski
• [GIT PULL] ARM: EXYNOS: dts: Fixes for 4.2   Krzysztof Kozlowski
• [PATCH 1/2] ASoC: Drop owner assignment from i2c_driver   Krzysztof Kozlowski
• [RFC] ARM: EXYNOS: reset KFC cores when cpu is up   Krzysztof Kozlowski
• [RFC] ARM: EXYNOS: reset KFC cores when cpu is up   Krzysztof Kozlowski
• [PATCH v2 1/2] ASoC: Drop owner assignment from i2c_driver   Krzysztof Kozlowski
• [PATCH v2 2/2] ASoC: Drop owner assignment from platform_driver   Krzysztof Kozlowski
• [PATCH v2 2/2] ASoC: Drop owner assignment from platform_driver   Krzysztof Kozlowski
• [RFC] ARM: EXYNOS: reset KFC cores when cpu is up   Krzysztof Kozlowski
• [PATCH 1/3] ARM: multi_v7_defconfig: Enable max77802 regulator   Krzysztof Kozlowski
• [PATCH 3/3] ARM: exynos_defconfig: Enable NTC Thermistors support   Krzysztof Kozlowski
• [PATCH 2/3] ARM: multi_v7_defconfig: Enable NTC Thermistors support   Krzysztof Kozlowski
• [PATCH] ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs   Krzysztof Kozlowski
• [PATCH v3 2/4] ARM: dts: Exynos5250: add CPU OPP and regulator supply property   Krzysztof Kozlowski
• [PATCH v3 2/4] ARM: dts: Exynos5250: add CPU OPP and regulator supply property   Krzysztof Kozlowski
• [RFC] ARM: EXYNOS: reset KFC cores when cpu is up   Krzysztof Kozlowski
• [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Krzysztof Kozlowski
• [GIT PULL] ARM: EXYNOS: dts: Improvements for 4.3   Krzysztof Kozlowski
• [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3   Krzysztof Kozlowski
• [PATCH 1/3] ARM: multi_v7_defconfig: Enable max77802 regulator   Krzysztof Kozlowski
• [PATCH 3.19.y-ckt 173/251] clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier   Krzysztof Kozlowski
• [PATCH v6 1/3] clk: samsung: exynos3250: Add cpu clock configuration data and instaniate cpu clock   Krzysztof Kozlowski
• [PATCH 3.19.y-ckt 173/251] clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier   Krzysztof Kozlowski
• [PATCH v2 3/4] mfd: Add DT binding for Maxim MAX77802 IC   Krzysztof Kozlowski
• [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding   Krzysztof Kozlowski
• [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding   Krzysztof Kozlowski
• [GIT PULL] ARM: defconfig: Improvements for 4.3   Krzysztof Kozlowski
• [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding   Krzysztof Kozlowski
• [RFC] ARM: EXYNOS: reset KFC cores when cpu is up   Krzysztof Kozlowski
• [PATCH 1/2] MAINTAINERS: add Device Tree binding doc for max77686 regulator   Krzysztof Kozlowski
• [PATCH 2/2] MAINTAINERS: add an entry for the Maxim MAX77802 PMIC drivers   Krzysztof Kozlowski
• [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3   Krzysztof Kozlowski
• [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3   Krzysztof Kozlowski
• [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC   Krzysztof Kozlowski
• [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3   Krzysztof Kozlowski
• [PATCH 3/4] clk: 88pm800: Add clk provider driver for 88pm800 family of devices   Krzysztof Kozlowski
• [PATCH] clk: s2mps11: Use kcalloc instead of kzalloc for array allocation   Krzysztof Kozlowski
• [PATCH-v2 2/2] regulator: 88pm800: Add support for configuration of dual phase on BUCK1   Krzysztof Kozlowski
• [PATCH 4/4] mfd: 88pm800: Add support for clk subdevice   Krzysztof Kozlowski
• [PATCH 2/4] mfd: devicetree: bindings: Add clock subdevice node information   Krzysztof Kozlowski
• [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3   Krzysztof Kozlowski
• [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250   Krzysztof Kozlowski
• [GIT PULL] ARM: defconfig: Improvements for 4.3   Krzysztof Kozlowski
• [GIT PULL] Non-critical fixes for v4.3   Krzysztof Kozlowski
• [GIT PULL] Non-critical fixes for v4.3   Krzysztof Kozlowski
• [PATCH v2] ARM: dts: Add SPI CS on exynos5250-snow   Krzysztof Kozlowski
• [RFC PATCH 3/3] ARM: dts: add MCT property use-cp15-phys-counter for exynos5422-odroidxu3   Krzysztof Kozlowski
• [RFC PATCH 1/3] clocksource: exynos_mct: allow mct to read counter from coprocessor   Krzysztof Kozlowski
• [PATCH] MAINTAINERS: pinctrl: Move Thomas Abraham to CREDITS   Krzysztof Kozlowski
• [PATCH] ARM: EXYNOS: pd: fix resource deallocation on error path   Krzysztof Kozlowski
• [PATCH] ARM: EXYNOS: pd: fix resource deallocation on error path   Krzysztof Kozlowski
• [PATCH] ARM: EXYNOS: pd: fix resource deallocation on error path   Krzysztof Kozlowski
• [PATCH v2 1/2] ARM: EXYNOS: pd: fix potentian kfree() of ro memory   Krzysztof Kozlowski
• [PATCH v2 2/2] ARM: EXYNOS: fix double of_node_put() on error path   Krzysztof Kozlowski
• [PATCH-V5 4/4] mfd: devicetree: bindings: Add new 88pm800 mfd binding   Krzysztof Kozłowski
• [PATCH v2 0/5] Add support for PWMSS on DRA7   Tero Kristo
• [PATCH v5] clk: change clk_ops' ->determine_rate() prototype   Tero Kristo
• [PATCH 7/7] ARM: OMAP2+: Include clk.h   Tero Kristo
• [PATCHv3 00/27] ARM: OMAP2+: clock code move under clk driver   Tero Kristo
• [PATCH 0/3] ARM: OMAP2+: hwmod: RTC: Add lock and unlock hooks   Tero Kristo
• [PATCH 0/3] ARM: OMAP2+: hwmod: RTC: Add lock and unlock hooks   Tero Kristo
• [PATCH] ARM: OMAP3: clock: remove un-used core dpll re-program code   Tero Kristo
• [PATCH 0/3] ARM: OMAP2+: hwmod: RTC: Add lock and unlock hooks   Tero Kristo
• [PATCH v4 3/5] tee: generic TEE subsystem   Greg Kroah-Hartman
• [PATCH v4 3/5] tee: generic TEE subsystem   Greg Kroah-Hartman
• [PATCH v4 3/5] tee: generic TEE subsystem   Greg Kroah-Hartman
• [PATCH v4 3/5] tee: generic TEE subsystem   Greg Kroah-Hartman
• [PATCH] serial/amba-pl011: Disable interrupts around TX softirq   Greg Kroah-Hartman
• [PATCH] serial/amba-pl011: Disable interrupts around TX softirq   Greg Kroah-Hartman
• [PATCH 4.1 230/267] clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier   Greg Kroah-Hartman
• [PATCH 3.14 106/125] clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier   Greg Kroah-Hartman
• [PATCH 05/18] ARM/gemini/time: Migrate to new 'set-state' interface   Hans Ulli Kroll
• [1/2] RTC: Add core rtc support for Gemini Soc devices   Hans Ulli Kroll
• [1/2] RTC: Add core rtc support for Gemini Soc devices   Hans Ulli Kroll
• [PATCH 02/12] [media] dvb-pll: Add support for THOMSON DTT7546X tuner.   Michael Ira Krufky
• [PATCH 02/12] [media] dvb-pll: Add support for THOMSON DTT7546X tuner.   Michael Ira Krufky
• [PATCH 02/12] [media] dvb-pll: Add support for THOMSON DTT7546X tuner.   Michael Ira Krufky
• [PATCH] spi: imx: fix ecspi mode setup   Andrew Kuksov
• [PATCH] spi: imx: fix ecspi mode setup   Andrew Y. Kuksov
• [PATCH 03/10] OPP: Allocate dev_opp from _add_device_opp()   Viresh Kumar
• [PATCH 05/10] opp: Add support to parse "operating-points-v2" bindings   Viresh Kumar
• [PATCH 05/10] opp: Add support to parse "operating-points-v2" bindings   Viresh Kumar
• [PATCH 03/10] OPP: Allocate dev_opp from _add_device_opp()   Viresh Kumar
• [PATCH 25/41] clocksource: tegra20: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 41/41] clocksource: zevio: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 39/41] clocksource: vf_pit: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 39/41] clocksource: vf_pit: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 16/41] clocksource: pxa: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 0/2] clockevent/drivers: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 1/2] clockevents/drivers/timer-imx-gpt: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 2/2] clockevents/drivers/timer-sp804: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 00/18] ARM: Migrate clockevent drivers to 'set-state'   Viresh Kumar
• [PATCH 01/18] ARM/smp_twd: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 02/18] ARM/cns3xxx/timer: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 03/18] ARM/davinci/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 04/18] ARM/dc21285-timer: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 05/18] ARM/gemini/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 06/18] ARM/imx/epit: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 07/18] ARM/ixp4xx/timer: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 08/18] ARM/ks8695/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 09/18] ARM/lpc32xx/timer: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 10/18] ARM/mmp/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 11/18] ARM/netx/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 12/18] ARM/omap1/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 13/18] ARM/omap1/timer32: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 14/18] ARM/omap2/timer: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 15/18] ARM/SPEAr/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 16/18] ARM/w90x900/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 17/18] ARM/iop/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 18/18] ARM/orion/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH] thermal: cpu_cooling: Iterate over all CPUs in clip_cpu mask to get frequency table   Viresh Kumar
• [PATCH 01/41] clocksource: asm9260: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH v2 0/9] cpufreq: Introduce support for ST's cpufreq functionality   Viresh Kumar
• [PATCH v2 0/9] cpufreq: Introduce support for ST's cpufreq functionality   Viresh Kumar
• [PATCH v5 1/2] dt-bindings: mediatek: Add MT8173 cpufreq driver binding   Viresh Kumar
• [PATCH v5 2/2] cpufreq: mediatek: Add MT8173 cpufreq driver   Viresh Kumar
• [PATCH v5 2/2] cpufreq: mediatek: Add MT8173 cpufreq driver   Viresh Kumar
• [PATCH 05/10] opp: Add support to parse "operating-points-v2" bindings   Viresh Kumar
• [PATCH v3 0/4] cpufreq: use generic cpufreq drivers for Exynos5250 platform   Viresh Kumar
• [PATCH v6 2/4] dt-bindings: mediatek: Add MT8173 cpufreq driver bindings   Viresh Kumar
• [PATCH v6 0/4] Add Mediatek MT8173 cpufreq driver   Viresh Kumar
• [PATCH 00/18] ARM: Migrate clockevent drivers to 'set-state'   Viresh Kumar
• [PATCH 10/10] cpufreq-dt: Add support for operating-points-v2 bindings   Viresh Kumar
• [PATCH 00/10] OPP: Add code to support operating-points-v2 bindings   Viresh Kumar
• [PULL] ARM: clockevents: Migrate to 'set-state' callbacks   Viresh Kumar
• [PATCH 01/18] ARM/smp_twd: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 02/18] ARM/cns3xxx/timer: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 03/18] ARM/davinci/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 04/18] ARM/dc21285-timer: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 05/18] ARM/gemini/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 06/18] ARM/imx/epit: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 07/18] ARM/ixp4xx/timer: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 08/18] ARM/ks8695/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 09/18] ARM/lpc32xx/timer: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 10/18] ARM/mmp/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 11/18] ARM/netx/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 12/18] ARM/omap1/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 13/18] ARM/omap1/timer32: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 14/18] ARM/omap2/timer: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 15/18] ARM/SPEAr/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 16/18] ARM/w90x900/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 17/18] ARM/iop/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PATCH 18/18] ARM/orion/time: Migrate to new 'set-state' interface   Viresh Kumar
• [PULL] ARM: clockevents: Migrate to 'set-state' callbacks   Viresh Kumar
• [PATCH 08/10] OPP: Add support for opp-suspend   Viresh Kumar
• [PATCH 07/10] opp: Add OPP sharing information to OPP library   Viresh Kumar
• [PATCH 07/10] opp: Add OPP sharing information to OPP library   Viresh Kumar
• [PATCH v3 1/1] dt: cpufreq: st: Provide bindings for ST's CPUFreq implementation   Viresh Kumar
• [PATCH 05/10] opp: Add support to parse "operating-points-v2" bindings   Viresh Kumar
• [PATCH 05/10] opp: Add support to parse "operating-points-v2" bindings   Viresh Kumar
• [PATCH 07/10] opp: Add OPP sharing information to OPP library   Viresh Kumar
• [PATCH V2 00/11] OPP: Add code to support operating-points-v2 bindings   Viresh Kumar
• [PATCH V2 01/11] opp: Create a directory for opp bindings   Viresh Kumar
• [PATCH V2 02/11] opp: Relocate few routines   Viresh Kumar
• [PATCH V2 03/11] OPP: Create _remove_device_opp() for freeing dev_opp   Viresh Kumar
• [PATCH V2 04/11] OPP: Allocate dev_opp from _add_device_opp()   Viresh Kumar
• [PATCH V2 05/11] OPP: Break _opp_add_dynamic() into smaller functions   Viresh Kumar
• [PATCH V2 06/11] opp: Add support to parse "operating-points-v2" bindings   Viresh Kumar
• [PATCH V2 07/11] OPP: Add clock-latency-ns support   Viresh Kumar
• [PATCH V2 08/11] opp: Add OPP sharing information to OPP library   Viresh Kumar
• [PATCH V2 09/11] OPP: Add support for opp-suspend   Viresh Kumar
• [PATCH V2 10/11] opp: Add helpers for initializing CPU OPPs   Viresh Kumar
• [PATCH V2 11/11] cpufreq-dt: Add support for operating-points-v2 bindings   Viresh Kumar
• [PATCH v2 1/7] opp: add dev_pm_opp_get_turbo_mode_setting() helper   Viresh Kumar
• [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes   Viresh Kumar
• [PATCH v2 3/7] cpufreq-dt: add turbo modes support   Viresh Kumar
• [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes   Viresh Kumar
• [PATCH v2 3/7] cpufreq-dt: add turbo modes support   Viresh Kumar
• [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes   Viresh Kumar
• [PATCH v2 3/7] cpufreq-dt: add turbo modes support   Viresh Kumar
• [PATCH V2 00/11] OPP: Add code to support operating-points-v2 bindings   Viresh Kumar
• [PATCH V2 08/11] opp: Add OPP sharing information to OPP library   Viresh Kumar
• [PATCH v4 1/2] dt: cpufreq: st: Provide bindings for ST's CPUFreq implementation   Viresh Kumar
• [PATCH v4 2/2] dt: power: st: Provide bindings for ST's OPPs   Viresh Kumar
• [PATCH v4 2/2] dt: power: st: Provide bindings for ST's OPPs   Viresh Kumar
• [PATCH v4 1/2] dt: cpufreq: st: Provide bindings for ST's CPUFreq implementation   Viresh Kumar
• [PATCH v4 1/2] dt: cpufreq: st: Provide bindings for ST's CPUFreq implementation   Viresh Kumar
• [PATCH 05/10] opp: Add support to parse "operating-points-v2" bindings   Viresh Kumar
• [PATCH V3 00/16] OPP: Add code to support operating-points-v2 bindings   Viresh Kumar
• [PATCH V3 01/16] PM / OPP: Update bindings to make opp-hz a 64 bit value   Viresh Kumar
• [PATCH V3 02/16] PM / OPP: Create a directory for opp bindings   Viresh Kumar
• [PATCH V3 03/16] PM / OPP: Relocate few routines   Viresh Kumar
• [PATCH V3 04/16] PM / OPP: Create _remove_device_opp() for freeing dev_opp   Viresh Kumar
• [PATCH V3 05/16] PM / OPP: Allocate dev_opp from _add_device_opp()   Viresh Kumar
• [PATCH V3 06/16] PM / OPP: Break _opp_add_dynamic() into smaller functions   Viresh Kumar
• [PATCH V3 07/16] PM / OPP: Add support to parse "operating-points-v2" bindings   Viresh Kumar
• [PATCH V3 08/16] PM / OPP: Add clock-latency-ns support   Viresh Kumar
• [PATCH V3 09/16] PM / OPP: Add OPP sharing information to OPP library   Viresh Kumar
• [PATCH V3 10/16] PM / OPP: Add support for opp-suspend   Viresh Kumar
• [PATCH V3 11/16] PM / OPP: Add helpers for initializing CPU OPPs   Viresh Kumar
• [PATCH V3 12/16] PM / OPP: add dev_pm_opp_is_turbo() helper   Viresh Kumar
• [PATCH V3 13/16] cpufreq: Update boost flag while initializing freq table from OPPs   Viresh Kumar
• [PATCH V3 14/16] cpufreq: Allow drivers to enable boost support after registering driver   Viresh Kumar
• [PATCH V3 15/16] cpufreq: dt: Add support for operating-points-v2 bindings   Viresh Kumar
• [PATCH V3 16/16] cpufreq: dt: Add support for turbo/boost mode   Viresh Kumar
• [PATCH 05/10] opp: Add support to parse "operating-points-v2" bindings   Viresh Kumar
• [PATCH V3 02/16] PM / OPP: Create a directory for opp bindings   Viresh Kumar
• [PATCH V3 02/16] PM / OPP: Create a directory for opp bindings   Viresh Kumar
• [PATCH V3 resend] PM / OPP: Create a directory for opp bindings   Viresh Kumar
• [PATCH V3 07/16] PM / OPP: Add support to parse "operating-points-v2" bindings   Viresh Kumar
• [PATCH V3 11/16] PM / OPP: Add helpers for initializing CPU OPPs   Viresh Kumar
• [PATCH V3 12/16] PM / OPP: add dev_pm_opp_is_turbo() helper   Viresh Kumar
• [PATCH V3 10/16] PM / OPP: Add support for opp-suspend   Viresh Kumar
• [PATCH 09/15] drivers: rtc: Drop unlikely before IS_ERR(_OR_NULL)   Viresh Kumar
• [PATCH] drivers: rtc: fix ptr_ret.cocci warnings   Viresh Kumar
• [PATCH 9/15 V2] drivers: rtc: Drop (un)likely before IS_ERR(_OR_NULL)   Viresh Kumar
• [PATCH] arm64: dts: mt8173: add clock_null   Daniel Kurtz
• [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock controllers   Daniel Kurtz
• [PATCH v2 1/4] clk: mediatek: mt8173: Fix enabling of critical clocks   Daniel Kurtz
• [PATCH v2 3/4] clk: mediatek: Add subsystem clocks of MT8173   Daniel Kurtz
• [PATCH v2 4/4] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS   Daniel Kurtz
• [PATCH v2 1/4] clk: mediatek: mt8173: Fix enabling of critical clocks   Daniel Kurtz
• [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus   Daniel Kurtz
• [PATCH] arm64: dts: mt8173: add clock_null   Daniel Kurtz
• [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock controllers   Daniel Kurtz
• [PATCH v3 2/2] pwm: add MediaTek display PWM driver support   Daniel Kurtz
• [PATCH v3 1/2] dt-bindings: pwm: add MediaTek display PWM bindings   Daniel Kurtz
• [PATCH v2 3/4] clk: mediatek: Add subsystem clocks of MT8173   Daniel Kurtz
• [PATCH v2 4/4] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS   Daniel Kurtz
• [PATCH v2 1/4] clk: mediatek: mt8173: Fix enabling of critical clocks   Daniel Kurtz
• [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock controllers   Daniel Kurtz
• [PATCH v2 4/9] clocksource: mediatek: Use GPT as sched clock source   Daniel Kurtz
• [PATCH] arm64: dts: mt8173: Add afe device node   Daniel Kurtz
• [PATCH v4 3/3] arm64: dts: mt8173: add MT8173 display PWM driver support dtsi   Daniel Kurtz
• [PATCH 1/2] drm: rockchip: Don't pass DRM fake offset to dma-api   Daniel Kurtz
• [PATCH] drm/rockchip: use drm_gem_mmap helpers   Daniel Kurtz
• [PATCH] arm64: dts: mt8173: add clock_null   Daniel Kurtz
• [PATCH] arm64: dts: mt8173: add clock_null   Daniel Kurtz
• [PATCH v4 1/3] dt-bindings: pwm: add MediaTek display PWM bindings   Daniel Kurtz
• [PATCH v4 1/3] dt-bindings: pwm: add MediaTek display PWM bindings   Daniel Kurtz
• [PATCH v2] arm64: dts: mt8173: Add afe device node   Daniel Kurtz
• [PATCH] arm64: dts: mt8173: add clock_null   Daniel Kurtz
• [PATCH 0/2] Add clk_null to be the dummy root of MT8173 clocks   Daniel Kurtz
• [PATCH 2/4] dt-bindings: soc: Add documentation for the MediaTek SCPSYS unit   Daniel Kurtz
• [PATCH v5 2/3] pwm: add MediaTek display PWM driver support   Daniel Kurtz
• [PATCH v5 1/3] dt-bindings: pwm: add MediaTek display PWM bindings   Daniel Kurtz
• [PATCH v3 4/5] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS   Daniel Kurtz
• [PATCH v3 4/5] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS   Daniel Kurtz
• [PATCH 5/5] arm64: dts: mt8173: add timer node   Daniel Kurtz
• [PATCH 5/5] arm64: dts: mt8173: add timer node   Daniel Kurtz
• [RFC PATCH v2 1/1] drivers: cpuidle: cpuidle-arm: heterogeneous systems extension   Daniel Kurtz
• [PATCH 4/5] clk: mediatek: add 13mhz clock for MT8173   Daniel Kurtz
• [PATCH 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT when setup   Daniel Kurtz
• [PATCH v3] clk: mediatek: Export CPU mux clocks for CPU frequency control   Daniel Kurtz
• [PATCH v2 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173   Daniel Kurtz
• [PATCH v3 4/5] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS   Daniel Kurtz
• [PATCH v4] clk: mediatek: Export CPU mux clocks for CPU frequency control   Daniel Kurtz
• [PATCH 1/3] dt-bindings: thermal: Add binding document for Mediatek thermal controller   Daniel Kurtz
• [PATCH v5 2/3] pwm: add MediaTek display PWM driver support   Daniel Kurtz
• [PATCH] arm64: dts: mediatek: Add MT8173 MMC dts   Daniel Kurtz
• [PATCH v5 2/3] pwm: add MediaTek display PWM driver support   Daniel Kurtz
• [PATCH v5 2/3] pwm: add MediaTek display PWM driver support   Daniel Kurtz
• [PATCH v5 2/3] pwm: add MediaTek display PWM driver support   Daniel Kurtz
• [PATCH v6 3/3] arm64: dts: mt8173: add MT8173 display PWM driver support node   Daniel Kurtz
• [PATCH v2 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173   Daniel Kurtz
• [PATCH 2/3] thermal: Add Mediatek thermal controller support   Daniel Kurtz
• [PATCH v3 2/2] regulator: mt6311: Add support for mt6311 regulator   Daniel Kurtz
• [PATCH v3 6/6] dts: mt8173: Add iommu/smi nodes for mt8173   Daniel Kurtz
• [PATCH v6 1/3] dt-bindings: pwm: add MediaTek display PWM bindings   Daniel Kurtz
• [PATCH v4 2/7] clk: mediatek: Fix rate and dependency of MT8173 clocks   Daniel Kurtz
• [PATCH v4 5/7] clk: mediatek: Add subsystem clocks of MT8173   Daniel Kurtz
• [PATCH v4 6/7] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS   Daniel Kurtz
• [PATCH v4 7/7] arm64: dts: mt8173: Add subsystem clock controller device nodes   Daniel Kurtz
• [PATCH v4 1/7] clk: mediatek: Add fixed clocks support for Mediatek SoC.   Daniel Kurtz
• [PATCH] arm: fault.c: fix unhandled page fault message   Levente Kurusa
• [PATCH] arm: fault.c: fix unhandled page fault message   Levente Kurusa
• [PATCH] KVM: Add Kconfig option to signal cross-endian guests   Greg Kurz
• [linux-sunxi] [PATCH 1/2] ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE   Priit Laes
• [PATCH v5 02/46] usb: gadget: add endpoint capabilities flags   David Laight
• Build failure on ARM64 for Linux 4.2-rc1 was: Linux 4.2-rc1   Mark Langsdorf
• Build failure on ARM64 for Linux 4.2-rc1 was: Linux 4.2-rc1   Mark Langsdorf
• [PATCH] watchdog: sunxi: fix activation of system reset   Francesco Lavra
• [PATCH] watchdog: sunxi: fix activation of system reset   Francesco Lavra
• [PATCH v2] watchdog: sunxi: fix activation of system reset   Francesco Lavra
• [PATCH] [TWL4030 MADC] Fix ADC[3:6] readings   Adam Lee
• [PATCH] [TWL4030 MADC] Fix ADC[3:6] readings   Adam Lee
• [PATCH] [TWL4030 MADC] Fix ADC[3:6] readings   Adam Lee
• [V3] [TWL4030 MADC] Fix ADC[3:6] readings   Adam Lee
• [PATCH v2] ARM: dts: configure regulators for Gumstix Pepper   Adam YH Lee
• [PATCH V2] arm:DTS Correct audio input route & set mic bias   Adam YH Lee
• [PATCH] Fix incomplete initialization of ADC[3:6]   Adam YH Lee
• [PATCH] [TWL4030 MADC] Fix ADC[3:6] readings   Adam YH Lee
• [PATCH] Fix incomplete initialization of ADC[3:6]$   Adam YH Lee
• [PATCH] [TWL4030 MADC] Fix ADC[3:6] readings   Adam YH Lee
• [V2] [TWL4030 MADC] Fix ADC[3:6] readings   Adam YH Lee
• [V3] [TWL4030 MADC] Fix ADC[3:6] readings   Adam YH Lee
• Stack trace using ftrace   Jungseok Lee
• Stack trace using ftrace   Jungseok Lee
• Stack trace using ftrace   Jungseok Lee
• [RFC 0/3] arm64: ftrace: fix incorrect output from stack tracer   Jungseok Lee
• [RFC 2/3] arm64: refactor save_stack_trace()   Jungseok Lee
• [RFC 2/3] arm64: refactor save_stack_trace()   Jungseok Lee
• [RFC 2/3] arm64: refactor save_stack_trace()   Jungseok Lee
• [RFC 2/3] arm64: refactor save_stack_trace()   Jungseok Lee
• [RFC 2/3] arm64: refactor save_stack_trace()   Jungseok Lee
• [RFC 2/3] arm64: refactor save_stack_trace()   Jungseok Lee
• [RFC 2/3] arm64: refactor save_stack_trace()   Jungseok Lee
• [RFC 2/3] arm64: refactor save_stack_trace()   Jungseok Lee
• [RFC 2/3] arm64: refactor save_stack_trace()   Jungseok Lee
• [RFC 2/3] arm64: refactor save_stack_trace()   Jungseok Lee
• ACPI: regression: Failed to initialize GIC IRQ controller   Ming Lei
• ACPI: regression: Failed to initialize GIC IRQ controller   Ming Lei
• ACPI: regression: Failed to initialize GIC IRQ controller   Ming Lei
• [PATCH v2 0/9] bugfixs and add support for non-pci devices   Zhen Lei
• [PATCH v2 1/9] iommu/arm-smmu: fix the assignment of L1 table log2entries   Zhen Lei
• [PATCH v2 2/9] iommu/arm-smmu: fix the index calculation of strtab   Zhen Lei
• [PATCH v2 3/9] iommu/arm-smmu: fix the values of ARM64_TCR_IRGN0_SHIFT and ARM64_TCR_ORGN0_SHIFT   Zhen Lei
• [PATCH v2 4/9] iommu/arm-smmu: enlarge STRTAB_L1_SZ_SHIFT to support larger sidsize   Zhen Lei
• [PATCH v2 5/9] iommu/arm-smmu: skip the execution of CMD_PREFETCH_CONFIG   Zhen Lei
• [PATCH v2 6/9] iommu/arm-smmu: to support probe deferral   Zhen Lei
• [PATCH v2 7/9] iommu/arm-smmu: remove arm_smmu_devices   Zhen Lei
• [PATCH v2 8/9] iommu/arm-smmu: rename __arm_smmu_get_pci_sid   Zhen Lei
• [PATCH v2 9/9] iommu/arm-smmu: add support for non-pci devices   Zhen Lei
• [PATCH v3 0/5] iommu/arm-smmu: add support for non-pci devices   Zhen Lei
• [PATCH v3 1/5] iommu/arm-smmu: to support probe deferral   Zhen Lei
• [PATCH v3 2/5] iommu/arm-smmu: remove arm_smmu_devices   Zhen Lei
• [PATCH v3 3/5] iommu/arm-smmu: rename __arm_smmu_get_pci_sid   Zhen Lei
• [PATCH v3 4/5] iommu/arm-smmu: add support for non-pci devices   Zhen Lei
• [PATCH v3 5/5] iommu/arm-smmu: describe the limitation of #iommu-cells   Zhen Lei
• [PATCH v5 1/2] arm64: kvm: allows kvm cpu hotplug   Geoff Levand
• [PATCH 0/6] arm64 kexec kernel patches V8   Geoff Levand
• [PATCH] arm64: remove dead code   Geoff Levand
• [added to the 3.18 stable tree] clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier   Sasha Levin
• [RFC] arm: psci: implement cpuidle_ops   Daniel Lezcano
• [RFC] arm: psci: implement cpuidle_ops   Daniel Lezcano
• [PATCH 25/41] clocksource: tegra20: Migrate to new 'set-state' interface   Daniel Lezcano
• [PATCH 41/41] clocksource: zevio: Migrate to new 'set-state' interface   Daniel Lezcano
• [PATCH 41/41] clocksource: zevio: Migrate to new 'set-state' interface   Daniel Lezcano
• [PATCH] clocksource: dw_apb_timer: add dynamic irq flag to the timer   Daniel Lezcano
• [PATCH v2] clocksource: dw_apb_timer: add dynamic irq flag to the timer   Daniel Lezcano
• [RFC PATCH 1/3] arm: psci: rename psci_smp.c to psci.c   Daniel Lezcano
• [PULL] clockevents: last minute patch for 4.2-rc2   Daniel Lezcano
• [PATCH v2 0/8] add basic support for i.mx6 ul chip   Zhi Li
• [PATCH 3/4][v2] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Zhi Li
• [PATCH 1/4][v3] ARM: imx: imx7d-pinfunc: add gpio pad iomuxc settings   Zhi Li
• [PATCH 3/4][v3] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Zhi Li
• [PATCH 4/4][v3] ARM: imx: pinctrl-imx7d: add iomuxc-lpsr gpio group ids   Zhi Li
• [PATCH v3 1/1] ARM: dts: imx7d: add cortex-a7 coresight component   Zhi Li
• [PATCH v3 1/7] ARM: imx: add i.mx6ul msl support   Zhi Li
• [PATCH] rtc: snvs: select option REGMAP_MMIO   Zhi Li
• [PATCH v3 1/7] ARM: imx: add i.mx6ul msl support   Zhi Li
• [PATCH v2 4/8] ARM: pinctrl: imx: add i.mx6ul pinctrl driver   Zhi Li
• [PATCH v2 4/8] ARM: pinctrl: imx: add i.mx6ul pinctrl driver   Zhi Li
• [PATCH 1/2] ARM: dts: imx7d: enable snvs rtc, onoffkey and power off   Zhi Li
• [PATCH][v3] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Zhi Li
• [PATCH] input: snvs_pwrkey: add linux prefix for wakeup property   Zhi Li
• [PATCH][v3] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Zhi Li
• [PATCH v2 03/10] mtd: spi-nor: add DDR quad read support   Zhi Li
• [PATCH v2 03/10] mtd: spi-nor: add DDR quad read support   Zhi Li
• [PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D   Zhi Li
• [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs   Ricky Liang
• [RFC PATCH 0/2] remoteproc: Add zynqmp R5 remoteproc driver   Wendy Liang
• [RFC PATCH 1/2] remoteproc: Add zynqmp R5 remoteproc driver   Wendy Liang
• [RFC PATCH 2/2] Documentation: DTS: bindings: add ZynqMP RPU remoteproc   Wendy Liang
• [RFC PATCH 2/2] Documentation: DTS: bindings: add ZynqMP RPU remoteproc   Wendy Liang
• [PATCH] arm64: dts: mt8173: add clock_null   James Liao
• [PATCH v2 1/4] clk: mediatek: mt8173: Fix enabling of critical clocks   James Liao
• [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock controllers   James Liao
• [PATCH] arm64: dts: mt8173: add clock_null   James Liao
• [PATCH v2 3/4] clk: mediatek: Add subsystem clocks of MT8173   James Liao
• [PATCH v2 4/4] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS   James Liao
• [PATCH] arm64: dts: mt8173: add clock_null   James Liao
• [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock controllers   James Liao
• [PATCH] clk: mediatek: Add MT8173 MMPLL change rate support   James Liao
• [PATCH] clk: mediatek: Add MT8173 MMPLL change rate support   James Liao
• [PATCH] clk: mediatek: Add MT8173 MMPLL change rate support   James Liao
• [PATCH 0/2] Add MT8173 MMPLL change rate support   James Liao
• [PATCH v2 1/2] clk: mediatek: Fix PLL registers setting flow   James Liao
• [PATCH v2 2/2] clk: mediatek: Add MT8173 MMPLL change rate support   James Liao
• [PATCH 0/2] Add MT8173 MMPLL change rate support   James Liao
• [PATCH 0/2] Add MT8173 MMPLL change rate support   James Liao
• [PATCH v2 2/2] clk: mediatek: Add MT8173 MMPLL change rate support   James Liao
• [PATCH v3 0/3] Fixes for MT8173 PLLs   James Liao
• [PATCH v3 1/3] clk: mediatek: Fix PLL registers setting flow   James Liao
• [PATCH v3 2/3] clk: mediatek: Fix calculation of PLL rate settings   James Liao
• [PATCH v3 3/3] clk: mediatek: Add MT8173 MMPLL change rate support   James Liao
• [PATCH 0/2] Add clk_null to be the dummy root of MT8173 clocks   James Liao
• [PATCH 1/2] clk: mediatek: Add root clocks support for Mediatek SoC.   James Liao
• [PATCH 2/2] clk: mediatek: Add clk_null to be the dummy root clock for MT8173   James Liao
• [PATCH v3 0/5] Add Mediatek MT8173 subsystem clocks support   James Liao
• [PATCH v3 1/5] clk: mediatek: mt8173: Fix enabling of critical clocks   James Liao
• [PATCH v3 2/5] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock controllers   James Liao
• [PATCH v3 3/5] clk: mediatek: Add subsystem clocks of MT8173   James Liao
• [PATCH v3 4/5] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS   James Liao
• [PATCH v3 5/5] arm64: dts: mt8173: Add subsystem clock controller device nodes   James Liao
• [PATCH v3 5/5] arm64: dts: mt8173: Add subsystem clock controller device nodes   James Liao
• [PATCH v3 4/5] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS   James Liao
• [PATCH v3 4/5] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS   James Liao
• [PATCH 0/2] Add MT8173 MMPLL change rate support   James Liao
• [PATCH v4 0/7] Add Mediatek MT8173 subsystem clocks support   James Liao
• [PATCH v4 1/7] clk: mediatek: Add fixed clocks support for Mediatek SoC.   James Liao
• [PATCH v4 2/7] clk: mediatek: Fix rate and dependency of MT8173 clocks   James Liao
• [PATCH v4 3/7] clk: mediatek: mt8173: Fix enabling of critical clocks   James Liao
• [PATCH v4 4/7] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock controllers   James Liao
• [PATCH v4 5/7] clk: mediatek: Add subsystem clocks of MT8173   James Liao
• [PATCH v4 6/7] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS   James Liao
• [PATCH v4 7/7] arm64: dts: mt8173: Add subsystem clock controller device nodes   James Liao
• [PATCH v4 7/7] arm64: dts: mt8173: Add subsystem clock controller device nodes   James Liao
• [PATCH v4 5/7] clk: mediatek: Add subsystem clocks of MT8173   James Liao
• [PATCH v4 6/7] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS   James Liao
• [PATCH v4 1/7] clk: mediatek: Add fixed clocks support for Mediatek SoC.   James Liao
• [PATCH v4 2/7] clk: mediatek: Fix rate and dependency of MT8173 clocks   James Liao
• [PATCH v4 7/7] arm64: dts: mt8173: Add subsystem clock controller device nodes   James Liao
• [PATCH v5 00/10] Fixes and new clocks support for Mediatek MT8173   James Liao
• [PATCH v5 01/10] clk: mediatek: Removed unused dpi_ck clock from MT8173   James Liao
• [PATCH v5 02/10] clk: mediatek: Remove unused code from MT8173.   James Liao
• [PATCH v5 03/10] clk: mediatek: Add __initdata and __init for data and functions   James Liao
• [PATCH v5 04/10] clk: mediatek: Add fixed clocks support for Mediatek SoC.   James Liao
• [PATCH v5 05/10] clk: mediatek: Fix rate and dependency of MT8173 clocks   James Liao
• [PATCH v5 06/10] clk: mediatek: mt8173: Fix enabling of critical clocks   James Liao
• [PATCH v5 07/10] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock controllers   James Liao
• [PATCH v5 08/10] clk: mediatek: Add subsystem clocks of MT8173   James Liao
• [PATCH v5 09/10] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS   James Liao
• [PATCH v5 10/10] arm64: dts: mt8173: Add subsystem clock controller device nodes   James Liao
• [PATCH v5 01/10] clk: mediatek: Removed unused dpi_ck clock from MT8173   James Liao
• [PATCH v5 06/10] clk: mediatek: mt8173: Fix enabling of critical clocks   James Liao
• [PATCH] mmc: sdhci-of-arasan: Get quirks from device tree   Shawn Lin
• [PATCH] mmc: sdhci-of-arasan: Get quirks from device tree   Shawn Lin
• [PATCH] mmc: sdhci-of-arasan: Get quirks from device tree   Shawn Lin
• n900 in 4.2-rc0: repeating oopses   Tony Lindgren
• [GIT PULL] omap generic wakeirq for v4.2 merge window   Tony Lindgren
• n900 in 4.2-rc0: repeating oopses   Tony Lindgren
• [PATCH 2/3] ARM: dts: configure regulators for Gumstix Pepper   Tony Lindgren
• [RFC PATCH] pinctrl-single: Use of pinctrl-single for external device over I2C   Tony Lindgren
• [PATCH 2/2] ARM: dts: am4372: Add emif node   Tony Lindgren
• [PATCH] Revert "ARM: dts: am335x-boneblack: disable RTC-only sleep"   Tony Lindgren
• [PATCH] ARM: dts: am4372.dtsi: disable rfbi   Tony Lindgren
• [RESEND] [PATCH v2 1/2] arm: devtree: Set system_rev from DT revision   Tony Lindgren
• USB Ethernet gadget on Nokia n900   Tony Lindgren
• [RESEND] [PATCH v2 1/2] arm: devtree: Set system_rev from DT revision   Tony Lindgren
• [RESEND] [PATCH v2 1/2] arm: devtree: Set system_rev from DT revision   Tony Lindgren
• [PATCH] base: power: wakeirq: don't leak dev->power.wakeirq   Tony Lindgren
• USB Ethernet gadget on Nokia n900   Tony Lindgren
• [PATCH] arm:irqchip: IRQCHIP_DECLARE macro is now accessible   Tony Lindgren
• [RFC PATCH] pinctrl-single: Use of pinctrl-single for external device over I2C   Tony Lindgren
• [GIT PULL] omap fixes against v4.2-rc1   Tony Lindgren
• [PATCH 12/18] ARM/omap1/time: Migrate to new 'set-state' interface   Tony Lindgren
• [PATCH 13/18] ARM/omap1/timer32: Migrate to new 'set-state' interface   Tony Lindgren
• [PATCH 14/18] ARM/omap2/timer: Migrate to new 'set-state' interface   Tony Lindgren
• [PATCH v3 0/3] ARM: OMAP2+: wkup_m3_rproc support patches   Tony Lindgren
• [PATCH v3 0/3] ARM: OMAP2+: wkup_m3_rproc support patches   Tony Lindgren
• [PATCH 5/5] arm: boot: store ATAGs structure into DT "/chosen/linux,atags" entry   Tony Lindgren
• [PATCH] arm: dts: dra7: arch timer sits in always-on power domain   Tony Lindgren
• [PATCH v2] ARM: dts: configure regulators for Gumstix Pepper   Tony Lindgren
• [PATCH 3/3] ARM: dts: Fix frequency scaling on Gumstix Pepper.   Tony Lindgren
• [PATCH 1/3] ARM: dts: Correct audio input route & set mic bias   Tony Lindgren
• [PATCH 0/2] Add missing #iommu-cells on IOMMU nodes   Tony Lindgren
• [PATCH] ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX   Tony Lindgren
• [PATCH] arm: dts: dra7: arch timer sits in always-on power domain   Tony Lindgren
• [PATCH v4 0/3] ARM: OMAP2+: wkup_m3_rproc support patches   Tony Lindgren
• [PATCH v5 8/8] ARM: DTS: dra7x: Integrate sDMA crossbar   Tony Lindgren
• [PATCH] pinctrl: dra: dt-bindings: Add virtual mode configuration option   Tony Lindgren
• [PATCH - resend for 4.2-rc2] ARM: DTS: dra7x: Integrate sDMA crossbar   Tony Lindgren
• [PATCH v2 00/20] ARM: DTS: am335x/am43xx: Audio support and fixes for audio   Tony Lindgren
• [PATCH V2] arm:DTS Correct audio input route & set mic bias   Tony Lindgren
• [PATCH] ARM: DRA7: Provide proper IO map table   Tony Lindgren
• [PATCH 0/2] ARM-OMAP2+: Deletion of unnecessary checks before two function calls   Tony Lindgren
• [PATCH] irqchip: omap-intc: improve IRQ handler   Tony Lindgren
• [PATCH] arm: dts: dra7: arch timer sits in always-on power domain   Tony Lindgren
• [GIT PULL] omap fixes against v4.2-rc2   Tony Lindgren
• [GIT PULL] omap dts changes for v4.3, part 1   Tony Lindgren
• [PATCH] ARM: OMAP2: Delete unnecessary checks before three function calls   Tony Lindgren
• [PATCH 4/4] ARM: omap2: restore OMAP4 barrier behaviour   Tony Lindgren
• [PATCH] ARM: DRA7: Provide proper IO map table   Tony Lindgren
• [PATCH] ARM: OMAP2+: Remove module references from IOMMU machine layer   Tony Lindgren
• [PATCH 0/4] ARM: omap2plus_defconfig updates   Tony Lindgren
• [PATCH 02/12] ARM: OMAP2+: Fix scrm compatible for dm814x   Tony Lindgren
• [PATCH 05/12] ARM: OMAP2+: Add support for initializing dm814x clocks   Tony Lindgren
• [PATCH 0/2] Drop two more omap3 legacy board files for v4.3 merge window   Tony Lindgren
• [PATCH 1/2] ARM: OMAP2+: Remove legacy booting support for LogicPD Torpedo   Tony Lindgren
• [PATCH 2/2] ARM: OMAP2+: Remove legacy booting support for Pandora   Tony Lindgren
• [PATCH 1/2] ARM: OMAP2+: Remove legacy OMAP3 ISP instantiation   Tony Lindgren
• [PATCH 2/2] ARM: OMAP2+: Remove legacy booting support for Pandora   Tony Lindgren
• [PATCH] ARM: OMAP2: Delete unnecessary checks before three function calls   Tony Lindgren
• [PATCH 2/2] ARM: OMAP2+: Remove legacy booting support for Pandora   Tony Lindgren
• [PATCH 05/12] ARM: OMAP2+: Add support for initializing dm814x clocks   Tony Lindgren
• [PATCH 4/4] ARM: omap2: restore OMAP4 barrier behaviour   Tony Lindgren
• [PATCH 0/2] Drop two more omap3 legacy board files for v4.3 merge window   Tony Lindgren
• [PATCH 2/2] ARM: OMAP2+: Remove legacy booting support for Pandora   Tony Lindgren
• [PATCH 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Tony Lindgren
• [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Tony Lindgren
• [PATCH v2 3/3] soc: ti: Add wkup_m3_ipc driver   Tony Lindgren
• [PATCH 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Tony Lindgren
• [PATCH 1/2] ARM: dts: Add support for phyCORE-AM335x SoM   Tony Lindgren
• [PATCH] ARM: dts: am437x: add aliases for all UART instances   Tony Lindgren
• [PATCH] ARM: dts: omap5-uevm: Add Palmas power button support   Tony Lindgren
• [PATCH 1/4] ARM: dts: omap3-pandora: miscellaneous corrections   Tony Lindgren
• [GIT PULL 1/3] omap dts changes for v4.3, part2   Tony Lindgren
• [GIT PULL 2/3] drop few more legacy boards for v4.3   Tony Lindgren
• [GIT PULL 3/3] defconfig changes for v4.3   Tony Lindgren
• [GIT PULL 3/3] defconfig changes for v4.3g   Tony Lindgren
• [PATCH 1/3] ARM: OMAP2+: N900: always enable IBE bit   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: PRCM and hwmod changes for v4.3   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: hwmod fixes for v4.2-rc   Tony Lindgren
• [GIT PULL 1/2] omap soc changes for v4.3   Tony Lindgren
• [GIT PULL 2/2] omap dts changes for dm814x for v4.3   Tony Lindgren
• [GIT PULL 1/2] omap soc changes for v4.3   Tony Lindgren
• n900 in 4.2-rc0: repeating oopses   Tony Lindgren
• [PATCH v5 2/6] arch: unify ioremap prototypes and macro aliases   Russell King - ARM Linux
• [PATCH] ARM: psci: keystone: remove keystone_smp_ops code if psci is supported   Russell King - ARM Linux
• Oops at boot after commit 965278dcb8ab... when using split memory region   Russell King - ARM Linux
• [PATCH] ARM: keystone: allow FORCE_MAX_ZONEORDER to be configurable on Keystone   Russell King - ARM Linux
• Oops at boot after commit 965278dcb8ab... when using split memory region   Russell King - ARM Linux
• [PATCH] ARM: fix vdsomunge not to depend on glibc specific error.h   Russell King - ARM Linux
• [PATCH] ARM: fix vdsomunge not to depend on glibc specific error.h   Russell King - ARM Linux
• [PATCH] ARM: psci: boot_secondary: replace __pa with virt_to_idmap   Russell King - ARM Linux
• [PATCH v5] arm DMA: Fix allocation from CMA for coherent DMA   Russell King - ARM Linux
• crypto: marvell/CESA: Issues with non cache-line aligned buffers   Russell King - ARM Linux
• [PATCH v2 3/5] drm/rockchip: vop: support plane scale   Russell King - ARM Linux
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Russell King - ARM Linux
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Russell King - ARM Linux
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Russell King - ARM Linux
• crypto: marvell/CESA: Issues with non cache-line aligned buffers   Russell King - ARM Linux
• RFC: default ioremap_*() variant defintions   Russell King - ARM Linux
• [PATCH v2 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Russell King - ARM Linux
• [PATCH v2 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Russell King - ARM Linux
• [PATCH v2 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Russell King - ARM Linux
• [PATCH 3/4] irqchip, gicv3: Implement Cavium ThunderX erratum 23154   Russell King - ARM Linux
• [PATCH] ARM: mm: use virt_to_idmap to get phys_reset address   Russell King - ARM Linux
• weird behavior of get/set_fiq_regs()   Russell King - ARM Linux
• weird behavior of get/set_fiq_regs()   Russell King - ARM Linux
• [PATCH] amba: Support clk parents and rates assigned in DT   Russell King - ARM Linux
• [PATCH v5 2/6] arch: unify ioremap prototypes and macro aliases   Russell King - ARM Linux
• [PATCH 5/5] arm: boot: store ATAGs structure into DT "/chosen/linux,atags" entry   Russell King - ARM Linux
• [PATCH 4/4] arm: psci: add cpuidle_ops support   Russell King - ARM Linux
• [PATCH] ARM: socfpga: put back v7_invalidate_l1 in socfpga_secondary_startup   Russell King - ARM Linux
• [PATCH] ARM: socfpga: put back v7_invalidate_l1 in socfpga_secondary_startup   Russell King - ARM Linux
• [PATCH] ARM: socfpga: put back v7_invalidate_l1 in socfpga_secondary_startup   Russell King - ARM Linux
• [PATCH] ARM: add boot image dependencies not to generate invalid images   Russell King - ARM Linux
• [PATCH v3] ARM: early fixmap support for earlycon   Russell King - ARM Linux
• [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend   Russell King - ARM Linux
• [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend   Russell King - ARM Linux
• [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend   Russell King - ARM Linux
• mx6: suspicious RCU usage   Russell King - ARM Linux
• [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend   Russell King - ARM Linux
• [PATCH 0/4] Fix OMAP4 barrier support   Russell King - ARM Linux
• [PATCH 0/8] sa11x0 PCMCIA updates   Russell King - ARM Linux
• [PATCH 0/7] Another posting of the Dove PMU series   Russell King - ARM Linux
• [PATCH] ARM: socfpga: put back v7_invalidate_l1 in socfpga_secondary_startup   Russell King - ARM Linux
• [PATCH] arm: fault.c: fix unhandled page fault message   Russell King - ARM Linux
• [PATCH 0/3] Shared NMI backtracing support for ARM/x86   Russell King - ARM Linux
• [PATCH 1/7] dt-bindings: add Marvell PMU documentation   Russell King - ARM Linux
• [PATCH] ARM: BCM: Restrict Broadcom BCM470X / BCM5301X to non-LPAE   Russell King - ARM Linux
• [PATCH 1/3] nmi: create generic NMI backtrace implementation   Russell King - ARM Linux
• [PATCH 3/3] ARM: add basic support for on-demand backtrace of other CPUs   Russell King - ARM Linux
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Russell King - ARM Linux
• [PATCH 4/4] ARM: omap2: restore OMAP4 barrier behaviour   Russell King - ARM Linux
• [PATCH 2/2] ARM: xip: Use correct symbol for end of ROM marker   Russell King - ARM Linux
• drm/edid: sound/core: pcm_drm_eld.c compilation error in 4.2   Russell King - ARM Linux
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Russell King - ARM Linux
• [PATCH 03/18] arm64: elf: advertise 8.1 atomic instructions as new hwcap   Russell King - ARM Linux
• [PATCH v5 1/6] drm: bridge/dw_hdmi: add audio support for more display resolutions   Russell King - ARM Linux
• [PATCH 3/3] ARM: errata 430973: move !ARCH_MULTIPLATFORM to Kconfig   Russell King - ARM Linux
• [PATCH 1/3] nmi: create generic NMI backtrace implementation   Russell King - ARM Linux
• [PATCH v5] ARM: smp: Only expose /sys/.../cpuX/online if hotpluggable   Russell King - ARM Linux
• [PATCH v2 2/2] ARM: pci: kill pcibios_msi_controller   Russell King - ARM Linux
• [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend   Russell King - ARM Linux
• [PATCH 3/3] ARM: errata 430973: move !ARCH_MULTIPLATFORM to Kconfig   Russell King - ARM Linux
• [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend   Russell King - ARM Linux
• [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend   Russell King - ARM Linux
• [PATCH 3/3] ARM: errata 430973: move !ARCH_MULTIPLATFORM to Kconfig   Russell King - ARM Linux
• [PATCH v2 2/2] ARM: pci: kill pcibios_msi_controller   Russell King - ARM Linux
• [PATCH] ARM: asm/unified.h: guard the IT macros against redefinition when using LTO   Russell King - ARM Linux
• [PATCH 00/18] Clean up exposure of arch-internal code   Russell King - ARM Linux
• [PATCH 00/18] Clean up exposure of arch-internal code   Russell King - ARM Linux
• [PATCH v3 5/6] iommu/mediatek: Add mt8173 IOMMU driver   Russell King - ARM Linux
• [PATCH 4/4] ARM: omap2: restore OMAP4 barrier behaviour   Russell King - ARM Linux
• question about detect hard lockups without NMIs using secondary cpus   Russell King - ARM Linux
• [PATCH] irqchip: gic: Add a cpu map for each GIC instance   Russell King - ARM Linux
• [PATCH 1/2] ARM: integrator: move framebuffers to driver   Russell King - ARM Linux
• arch/arm/kernel/setup.c does not compile at -O0   Russell King - ARM Linux
• arch/arm/kernel/setup.c does not compile at -O0   Russell King - ARM Linux
• [PATCH 0/7] Another posting of the Dove PMU series   Russell King - ARM Linux
• [PATCH] ARM: ux500: fix ux500 secondary CPU boot regression   Russell King - ARM Linux
• [PATCH] iommu/arm-smmu-v2: ThunderX(errata-23399) mis-extends 64bit registers   Russell King - ARM Linux
• Converting "board file" to device tree one device at a time?   Russell King - ARM Linux
• [PATCH v3 5/6] mmc: sdhci-esdhc-imx: config watermark level and burst length   Russell King - ARM Linux
• Converting "board file" to device tree one device at a time?   Russell King - ARM Linux
• MUSB dual-role on AM335x behaving weirdly   Bin Liu
• [RFC Patch V1 00/12] Reorganize struct msi_desc to prepare for support of generic MSI   Jiang Liu
• [RFC Patch V1 01/12] PCI: Add helper function msi_desc_to_pci_sysdata()   Jiang Liu
• [RFC Patch V1 02/12] MIPS, PCI: Use for_pci_msi_entry() to access MSI device list   Jiang Liu
• [RFC Patch V1 03/12] PowerPC, PCI: Use for_pci_msi_entry() to access MSI device list   Jiang Liu
• [RFC Patch V1 04/12] s390/pci: Use for_pci_msi_entry() to access MSI device list   Jiang Liu
• [RFC Patch V1 05/12] x86, PCI: Use for_pci_msi_entry() to access MSI device list   Jiang Liu
• [RFC Patch V1 06/12] PCI: Use for_pci_msi_entry() to access MSI device list   Jiang Liu
• [RFC Patch V1 07/12] sparc, PCI: Use helper functions to access fields in struct msi_desc   Jiang Liu
• [RFC Patch V1 08/12] PCI: Use helper functions to access fields in struct msi_desc   Jiang Liu
• [RFC Patch V1 09/12] genirq: Move msi_list from struct pci_dev to struct device   Jiang Liu
• [RFC Patch V1 10/12] genirq, PCI: Store 'struct device *' instead 'struct pci_dev *' in struct msi_desc   Jiang Liu
• [RFC Patch V1 11/12] genirq, PCI: Reorginize struct msi_desc to prepare for support of generic MSI   Jiang Liu
• [RFC Patch V1 12/12] genirq, PCI: Move alloc_msi_entry() from PCI MSI code into generic MSI code   Jiang Liu
• [PATCH 4/6] irqchip: GIC: Use chip_data instead of handler_data for cascaded interrupts   Jiang Liu
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Jiang Liu
• [Patch v5 0/6] Consolidate ACPI PCI root common code into ACPI core   Jiang Liu
• [linux-sunxi] [PATCH v5 2/7] phy-sun4i-usb: Add extcon support for the otg phy (phy0)   Jonathan Liu
• [PATCH v3 0/4] Add Mediatek SPI bus driver   Leilk Liu
• [PATCH v3 1/4] spi: support spi without dma channel to use can_dma()   Leilk Liu
• [PATCH v3 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus   Leilk Liu
• [PATCH v3 3/4] spi: mediatek: Add spi bus for Mediatek MT8173   Leilk Liu
• [PATCH v3 4/4] arm64: dts: Add spi bus dts   Leilk Liu
• [PATCH v4 0/3] Add Mediatek SPI bus driver   Leilk Liu
• [PATCH v4 1/3] dt-binding: spi: Mediatek: Document devicetree bindings for spi bus   Leilk Liu
• [PATCH v4 2/3] spi: mediatek: Add spi bus for Mediatek MT8173   Leilk Liu
• [PATCH v4 3/3] arm64: dts: Add spi bus dts   Leilk Liu
• [PATCH 4/8] xen: Use the correctly the Xen memory terminologies   Wei Liu
• [Xen-devel] [PATCH 4/8] xen: Use the correctly the Xen memory terminologies   Wei Liu
• [PATCH v7 3/7] arm64: Kprobes with single stepping support   David Long
• [PATCH 1/2] Move the pt_regs_offset struct definition from arch to common include file   David Long
• [PATCH 1/2] Move the pt_regs_offset struct definition from arch to common include file   David Long
• [PATCH v2 0/2] Consolidate redundant register/stack access code   David Long
• [PATCH v2 1/2] Move the pt_regs_offset struct definition from arch to common include file   David Long
• [PATCH v2 2/2] Consolidate redundant register/stack access code   David Long
• [PATCH 2/9] locking/qrwlock: avoid redundant atomic_add_return on read_lock_slowpath   Waiman Long
• [PATCH 2/9] locking/qrwlock: avoid redundant atomic_add_return on read_lock_slowpath   Waiman Long
• [PATCH] drivers/irqchip: replace pr_warning by pr_warn   Wang Long
• [PATCH] arm: mm: add __init section marker to free_initrd_mem   Wang Long
• [PATCH] arm64: mm: add __init section marker to free_initrd_mem   Wang Long
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller   Mike Looijmans
• [PATCH 1/3] ARM: socfpga: dts: Fix adxl34x formating   Walter Lozano
• [PATCH] i2c: core: only use set_scl for bus recovery after calling prepare_recovery   Jan Luebbe
• [PATCH] i2c: omap: fix bus recovery setup   Jan Luebbe
• [PATCH] clk: mvebu: update cpu clock frequency   Andrew Lunn
• [PATCH v3 1/6] dmaengine: mv_xor: fix big endian operation in register mode   Andrew Lunn
• [PATCH RFC 1/5] clk: mvebu: Add Armada 38x support for clk-cpu   Andrew Lunn
• [PATCH RFC 2/5] ARM: mvebu: Use shorter register definition in pmsu.c   Andrew Lunn
• crypto: marvell/CESA: Issues with non cache-line aligned buffers   Andrew Lunn
• [PATCH] ARM: dts: vf610: Nomenclature fixup for PTA6 pin used in RMII mode.   Andrew Lunn
• [PATCHv4 0/6] dmaengine: mv_xor fixes and improvements   Andrew Lunn
• [PATCH v2] ARM: dts: Convert Linkstation Mini to Device Tree   Andrew Lunn
• [PATCH 1/2] ARM: dts: add buffalo linkstation ls-wtgl   Andrew Lunn
• [PATCH 2/2] ARM: defconfig: add DT support for orion5x_defconfig   Andrew Lunn
• [PATCH 2/2] ARM: defconfig: add DT support for orion5x_defconfig   Andrew Lunn
• [PATCH v2 0/2] ARM: orion5x: DTS support for Linkstation LS-WTGL   Andrew Lunn
• [PATCH 0/7] Another posting of the Dove PMU series   Andrew Lunn
• [PATCH] ARM: fix vdsomunge not to depend on glibc specific error.h   Nathan Lynch
• [PATCH] ARM: fix vdsomunge not to depend on glibc specific error.h   Nathan Lynch
• VDSO build failure: collect2: fatal error: cannot find 'ld'   Nathan Lynch
• [PATCH v3 4/5] ARM: dts: mt8135: enable basic SMP bringup for mt8135   Nathan Lynch
• [PATCH] ARM: VDSO: fix regression with toolchains lacking ld.bfd executable   Nathan Lynch
• [PATCH] ARM: VDSO: fix regression with toolchains lacking ld.bfd executable   Nathan Lynch
• [PATCH] ARM: zynq: reserve space for jump target in secondary trampoline   Nathan Lynch
• [PATCH v2 5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery   Jan Lübbe
• [PATCH] i2c: omap: fix bus recovery setup   Jan Lübbe
• [PATCH v3 2/6] mmc: sdhci-esdhc-imx: add tuning-step seting support   Jan Lübbe
• kexec crash kernel boot failure on arm64   Anurup M
• kexec crash kernel boot failure on arm64   Anurup M
• n900 in 4.2-rc0: repeating oopses   Pavel Machek
• n900 in 4.2-rc0: repeating oopses   Pavel Machek
• n900 in 4.2-rc0: repeating oopses   Pavel Machek
• musb-hdrc: "Vbus off, timeout 1100 msec" message does not belong in sysfs   Pavel Machek
• [PATCH v2] thermal: consistently use int for temperatures   Pavel Machek
• [PATCH v2] thermal: consistently use int for temperatures   Pavel Machek
• [PATCH v2] thermal: consistently use int for temperatures   Pavel Machek
• n900 in 4.2-rc0: repeating oopses   Pavel Machek
• n900 in 4.2-rc0: repeating oopses   Pavel Machek
• [PATCH v3 0/2] Implement sample time consideration for Vybrid's ADC   Sanchayan Maity
• [PATCH v3 1/2] iio: adc: vf610: Determine sampling frequencies by using minimum sample time   Sanchayan Maity
• [PATCH v3 2/2] ARM: dts: vf-colibri: Add property for minimum sample time   Sanchayan Maity
• [PATCH v2 0/4] Add support for touchscreen on Colibri VF50   Sanchayan Maity
• [PATCH v2 1/4] ARM: dts: vfxxx: Add io-channel-cells property for ADC node   Sanchayan Maity
• [PATCH v2 2/4] ARM: dts: vf500-colibri: Add device tree node for touchscreen support   Sanchayan Maity
• [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50   Sanchayan Maity
• [PATCH v2 4/4] input: Add DT binding documentation for Colibri VF50 touchscreen   Sanchayan Maity
• [PATCH] thermal: exynos: Disable the regulator on probe failure   Lukasz Majewski
• [PATCH] thermal: consistently use int for temperatures   Lukasz Majewski
• [PATCH] thermal: exynos: Disable the regulator on probe failure   Lukasz Majewski
• [PATCH net 00/11] net: thunderx: Misc fixes   Aleksey Makarov
• [PATCH net 01/11] net: thunderx: Fix data integrity issues with LDWB   Aleksey Makarov
• [PATCH net 02/11] net: thunderx: Fix memory leak while tearing down interface   Aleksey Makarov
• [PATCH net 03/11] net: thunderx: Fix RQ_DROP miscalculation   Aleksey Makarov
• [PATCH net 04/11] net: thunderx: Fix memory leak when changing queue count   Aleksey Makarov
• [PATCH net 05/11] net: thunderx: Fix TSO packet statistic   Aleksey Makarov
• [PATCH net 06/11] net: thunderx: Suppress alloc_pages() failure warnings   Aleksey Makarov
• [PATCH net 07/11] net: thunderx: Wakeup TXQ only if CQE_TX are processed   Aleksey Makarov
• [PATCH net 08/11] net: thunderx: Set watchdog timeout value   Aleksey Makarov
• [PATCH net 09/11] net: thunderx: Fix crash when changing rss with mutliple traffic flows   Aleksey Makarov
• [PATCH net 10/11] net: thunderx: Add PCI driver shutdown routine   Aleksey Makarov
• [PATCH net 11/11] net: thunderx: Fix for crash while BGX teardown   Aleksey Makarov
• [PATCH] ARM: dts: sun7i: Enable USB DRC on Wexler TAB7200   Aleksei Mamlin
• [PATCH v2] dts: ls1021a: Add dts nodes for eTSEC0, eTSEC1 and eTSEC2   Claudiu Manoil
• [PATCH,v3 1/3] doc: dt: Update eTSEC bindings doc   Claudiu Manoil
• [PATCH,v3 2/3] ARM: dts: ls1021a: Add the eTSEC controller nodes   Claudiu Manoil
• [PATCH, v3 3/3] ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR   Claudiu Manoil
• [PATCH v5] arm DMA: Fix allocation from CMA for coherent DMA   Catalin Marinas
• Regular oops on shutdown of KVM/ARM64 machines with VGA device   Catalin Marinas
• [PATCH] arm64: Don't report clear pmds and puds as huge   Catalin Marinas
• [PATCH] arm64: Don't report clear pmds and puds as huge   Catalin Marinas
• [PATCH] ARM64 / SMP: Switch pr_err() to pr_debug() for disabled GICC entry   Catalin Marinas
• [PATCH] arm64: cpuidle: add __init section marker to arm_cpuidle_init   Catalin Marinas
• [PATCH] GICv3: Add ITS entry to THUNDER dts   Catalin Marinas
• [PATCH v5] arm DMA: Fix allocation from CMA for coherent DMA   Catalin Marinas
• [PATCH v2] ARM64 / SMP: Switch pr_err() to pr_debug() for disabled GICC entry   Catalin Marinas
• [PATCH v3 2/3] ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro   Catalin Marinas
• [GIT PULL] arm64 fixes/clean-up   Catalin Marinas
• some question about __dma_alloc in arch/arm/mm/dma-mapping.c   Catalin Marinas
• [PATCH v3 2/3] ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro   Catalin Marinas
• [PATCH] arm64: remove another unnecessary libfdt include path   Catalin Marinas
• [PATCH] arm64: defconfig: Add Ceva ahci to the defconfig   Catalin Marinas
• [PATCH v4 0/2] Correct for ACPI 5.1->6.0 spec changes in MADT GICC entries   Catalin Marinas
• [PATCH v3] arm64: Modify the dump mem for 64 bit addresses   Catalin Marinas
• [RFC PATCH] arm64: force CONFIG_SMP=y and remove redundant #ifdefs   Catalin Marinas
• [PATCH V3 2/5] mm: mlock: Add new mlock, munlock, and munlockall system calls   Catalin Marinas
• [PATCH] arm64: lib: use pair accessors for copy_*_user routines   Catalin Marinas
• [PATCH v2 5/5] arm64: add KASan support   Catalin Marinas
• [PATCH v2 2/5] drivers: firmware: psci: move power_state handling to generic code   Catalin Marinas
• [PATCH v4] arm64:Modify the dump mem for 64 bit addresses   Catalin Marinas
• [PATCH] arm64: Add support for hardware updates of the access and dirty pte bits   Catalin Marinas
• [GIT PULL] arm64 fixes for 4.2-rc2   Catalin Marinas
• [PATCH 3/3] arm64, mm: Use IPIs for TLB invalidation.   Catalin Marinas
• [PATCH] arm64: Remove clk-provider.h include   Catalin Marinas
• [patch] ARM64/irq: Use access helper irq_data_get_affinity_mask()   Catalin Marinas
• [PATCH 3/4] arm64: Add Broadcom's North Star 2 support   Catalin Marinas
• [PATCH 3/3] arm64, mm: Use IPIs for TLB invalidation.   Catalin Marinas
• [PATCH 3/3] arm64, mm: Use IPIs for TLB invalidation.   Catalin Marinas
• [PATCH v2 5/5] arm64: add KASan support   Catalin Marinas
• [PATCH] arm64: Better native ptrace support for compat tasks   Catalin Marinas
• [PATCH v2 09/10] arm64/BUG: Use BRK instruction for generic BUG traps   Catalin Marinas
• [PATCH v3 2/4] iommu: Implement common IOMMU ops for DMA mapping   Catalin Marinas
• [PATCH v3 3/4] arm64: Add IOMMU dma_ops   Catalin Marinas
• [PATCH] arm64: Split out platform options to separate Kconfig   Catalin Marinas
• [PATCH v2 5/5] arm64: add KASan support   Catalin Marinas
• [PATCH v3 3/4] arm64: Add IOMMU dma_ops   Catalin Marinas
• [PATCH v2 5/5] arm64: add KASan support   Catalin Marinas
• [PATCH] arm64: Better native ptrace support for compat tasks   Catalin Marinas
• [PATCH 3/5] arm64: kernel: Add min/max values in feature-detection register values.   Catalin Marinas
• [PATCH 1/5] arm64: kernel: preparatory: Move config_sctlr_el1   Catalin Marinas
• [PATCH 2/5] arm64: kernel: Add cpufeature 'enable' callback.   Catalin Marinas
• [PATCH 4/5] arm64: kernel: Add optional CONFIG_ parameter to ALTERNATIVE().   Catalin Marinas
• [PATCH 5/5] arm64: kernel: Add support for Privileged Access Never   Catalin Marinas
• [PATCH 1/5] arm64: kernel: preparatory: Move config_sctlr_el1   Catalin Marinas
• [PATCH 03/18] arm64: elf: advertise 8.1 atomic instructions as new hwcap   Catalin Marinas
• [PATCH 05/18] arm64: introduce CONFIG_ARM64_LSE_ATOMICS as fallback to ll/sc atomics   Catalin Marinas
• [PATCH v2 0/6] arm64: kernel: Add support for Privileged Access Never   Catalin Marinas
• [PATCH v2 1/6] arm64: kernel: Add cpuid_feature_extract_field() for 4bit sign extension   Catalin Marinas
• [PATCH v2 1/6] arm64: kernel: Add cpuid_feature_extract_field() for 4bit sign extension   Catalin Marinas
• [PATCH v2 4/6] arm64: kernel: Add min_register_value and use '>=' for feature detection   Catalin Marinas
• [PATCH v2 6/6] arm64: kernel: Add support for Privileged Access Never   Catalin Marinas
• [PATCH] sched, arm64: Fix the fallout of increasing the offset of 'thread_struct' within 'task_struct'   Catalin Marinas
• [PATCH v2 6/6] arm64: kernel: Add support for Privileged Access Never   Catalin Marinas
• [PATCH v3 1/6] arm64: kernel: Add cpuid_feature_extract_field() for 4bit sign extension   Catalin Marinas
• [PATCH v3 4/6] arm64: kernel: Add min_field_value and use '>=' for feature detection   Catalin Marinas
• [PATCH v3 6/6] arm64: kernel: Add support for Privileged Access Never   Catalin Marinas
• [PATCH 07/18] arm64: locks: patch in lse instructions when supported by the CPU   Catalin Marinas
• [PATCH 12/18] arm64: cmpxchg: avoid "cc" clobber in ll/sc routines   Catalin Marinas
• [PATCH] arm64: sys_reg() : Fix encoding of system registers   Catalin Marinas
• [GIT PULL] arm64 fixes for 4.2   Catalin Marinas
• [PATCH v3 1/5] mm: kasan: introduce generic kasan_populate_zero_shadow()   Catalin Marinas
• [PATCH v3 2/5] arm64: introduce VA_START macro - the first kernel virtual address.   Catalin Marinas
• [PATCH v3 3/5] arm64: move PGD_SIZE definition to pgalloc.h   Catalin Marinas
• [PATCH v3 5/5] ARM64: kasan: print memory assignment   Catalin Marinas
• [PATCH v3 4/5] arm64: add KASAN support   Catalin Marinas
• [RFC] arm64:use set_fixmap_offset to make it more clear   Catalin Marinas
• [PATCH 07/18] arm64: locks: patch in lse instructions when supported by the CPU   Catalin Marinas
• [PATCH 0/2] Last level (leaf) TLBI support   Catalin Marinas
• [PATCH 1/2] arm64: Clean up __flush_tlb(_kernel)_range functions   Catalin Marinas
• [PATCH 2/2] arm64: Use last level TLBI for user pte changes   Catalin Marinas
• [PATCH v2 01/20] arm64: rwlocks: don't fail trylock purely due to contention   Catalin Marinas
• [PATCH v2 02/20] documentation: Clarify failed cmpxchg memory ordering semantics   Catalin Marinas
• [PATCH v2 03/20] arm64: cpufeature.h: add missing #include of kernel.h   Catalin Marinas
• [PATCH v2 04/20] arm64: atomics: move ll/sc atomics into separate header file   Catalin Marinas
• [PATCH v2 05/20] arm64: elf: advertise 8.1 atomic instructions as new hwcap   Catalin Marinas
• [PATCH v2 06/20] arm64: alternatives: add cpu feature for lse atomics   Catalin Marinas
• [PATCH v2 07/20] arm64: introduce CONFIG_ARM64_LSE_ATOMICS as fallback to ll/sc atomics   Catalin Marinas
• [PATCH v2 08/20] arm64: atomics: patch in lse instructions when supported by the CPU   Catalin Marinas
• [PATCH v2 09/20] arm64: locks: patch in lse instructions when supported by the CPU   Catalin Marinas
• [PATCH v2 10/20] arm64: bitops: patch in lse instructions when supported by the CPU   Catalin Marinas
• [PATCH v2 11/20] arm64: xchg: patch in lse instructions when supported by the CPU   Catalin Marinas
• [PATCH v2 12/20] arm64: cmpxchg: patch in lse instructions when supported by the CPU   Catalin Marinas
• [PATCH v2 13/20] arm64: cmpxchg_dbl: patch in lse instructions when supported by the CPU   Catalin Marinas
• [PATCH v2 14/20] arm64: cmpxchg: avoid "cc" clobber in ll/sc routines   Catalin Marinas
• [PATCH v2 15/20] arm64: cmpxchg: avoid memory barrier on comparison failure   Catalin Marinas
• [PATCH v2 16/20] arm64: atomics: tidy up common atomic{,64}_* macros   Catalin Marinas
• [PATCH v2 17/20] arm64: atomics: prefetch the destination word for write prior to stxr   Catalin Marinas
• [PATCH v2 18/20] arm64: atomics: implement atomic{, 64}_cmpxchg using cmpxchg   Catalin Marinas
• [PATCH v2 19/20] arm64: atomic64_dec_if_positive: fix incorrect branch condition   Catalin Marinas
• [PATCH v2 20/20] arm64: kconfig: select HAVE_CMPXCHG_LOCAL   Catalin Marinas
• X-Gene: Unhandled fault: synchronous external abort in pci_generic_config_read32   Catalin Marinas
• [PATCH] arm64/efi: map the entire UEFI vendor string before reading it   Catalin Marinas
• [PATCH v4 5/7] arm64: add KASAN support   Catalin Marinas
• [PATCH v4 1/7] x86/kasan: generate KASAN_SHADOW_OFFSET in Makefile   Catalin Marinas
• [PATCH v4 7/7] x86/kasan: switch to generic kasan_populate_zero_shadow()   Catalin Marinas
• [PATCH 2/2] arm64: Use last level TLBI for user pte changes   Catalin Marinas
• [PATCH v4 2/4] iommu: Implement common IOMMU ops for DMA mapping   Catalin Marinas
• [PATCH v4 3/4] arm64: Add IOMMU dma_ops   Catalin Marinas
• [PATCH v4 4/4] arm64: Hook up IOMMU dma_ops   Catalin Marinas
• [GIT PULL] arm64 fix for 4.2-rc5   Catalin Marinas
• [RFC] arm64: defconfig: enable 48-bit VA by default   Catalin Marinas
• [RFC] arm64: defconfig: enable 48-bit VA by default   Catalin Marinas
• [RFC] arm64: defconfig: enable 48-bit VA by default   Catalin Marinas
• [RFC] arm64: defconfig: enable 48-bit VA by default   Catalin Marinas
• [RFC] arm64: defconfig: enable 48-bit VA by default   Catalin Marinas
• [PATCH v7 5/7] arm64: Add trampoline code for kretprobes   Catalin Marinas
• [PATCH] serial/amba-pl011: Disable interrupts around TX softirq   Dave Martin
• [PATCH v2 00/10] arm64: Use BRK instruction for generic BUG traps   Dave Martin
• [PATCH v2 01/10] arm64/debug: Eliminate magic number for size of BRK instruction   Dave Martin
• [PATCH v2 02/10] arm64/debug: Mask off all reserved bits from generated ESR values   Dave Martin
• [PATCH v2 03/10] arm64: esr.h type fixes and cleanup   Dave Martin
• [PATCH v2 04/10] arm64/debug: Eliminate magic number from ESR template definition   Dave Martin
• [PATCH v2 05/10] arm64/debug: More consistent naming for the BRK ESR template macro   Dave Martin
• [PATCH v2 06/10] arm64/debug: Move BRK ESR template macro into <asm/esr.h>   Dave Martin
• [PATCH v2 07/10] arm64/debug: Simplify BRK insn opcode declarations   Dave Martin
• [PATCH v2 08/10] arm64/debug: Add missing #include   Dave Martin
• [PATCH v2 09/10] arm64/BUG: Use BRK instruction for generic BUG traps   Dave Martin
• [PATCH v2 10/10] arm64/BUG: Show explicit backtrace for WARNs   Dave Martin
• [PATCH v2 02/10] arm64/debug: Mask off all reserved bits from generated ESR values   Dave Martin
• [PATCH v2 08/10] arm64/debug: Add missing #include   Dave Martin
• [PATCH v2 09/10] arm64/BUG: Use BRK instruction for generic BUG traps   Dave Martin
• [PATCH v2 09/10] arm64/BUG: Use BRK instruction for generic BUG traps   Dave Martin
• [PATCH v2 09/10] arm64/BUG: Use BRK instruction for generic BUG traps   Dave Martin
• [PATCH v2 03/10] arm64: esr.h type fixes and cleanup   Dave Martin
• [PATCH v2 09/10] arm64/BUG: Use BRK instruction for generic BUG traps   Dave Martin
• [PATCH v2 09/10] arm64/BUG: Use BRK instruction for generic BUG traps   Dave Martin
• [PATCH] serial/amba-pl011: Disable interrupts around TX softirq   Dave Martin
• [PATCH 3/5] ARM: MCPM: make internal helpers private to the core code   Dave Martin
• [PATCH v3 0/9] arm64: Use BRK instruction for generic BUG traps   Dave Martin
• [PATCH v3 1/9] arm64/debug: Eliminate magic number for size of BRK instruction   Dave Martin
• [PATCH v3 2/9] arm64/debug: Mask off all reserved bits from generated ESR values   Dave Martin
• [PATCH v3 3/9] arm64/debug: Eliminate magic number from ESR template definition   Dave Martin
• [PATCH v3 4/9] arm64/debug: More consistent naming for the BRK ESR template macro   Dave Martin
• [PATCH v3 5/9] arm64/debug: Move BRK ESR template macro into <asm/esr.h>   Dave Martin
• [PATCH v3 6/9] arm64/debug: Simplify BRK insn opcode declarations   Dave Martin
• [PATCH v3 7/9] arm64/debug: Add missing #includes   Dave Martin
• [PATCH v3 8/9] arm64/BUG: Use BRK instruction for generic BUG traps   Dave Martin
• [PATCH v3 9/9] arm64/BUG: Show explicit backtrace for WARNs   Dave Martin
• [PATCH REPOST] serial/amba-pl011: Disable interrupts around TX softirq   Dave Martin
• [PATCH] serial/amba-pl011: Disable interrupts around TX softirq   Dave Martin
• [PATCH] ARM: asm/unified.h: guard the IT macros against redefinition when using LTO   Dave Martin
• [PATCH 3/5] ARM: MCPM: make internal helpers private to the core code   Dave Martin
• [PATCH v2 09/10] arm64/BUG: Use BRK instruction for generic BUG traps   Dave P Martin
• Where to define platform-specific ndelay   Mason
• Write to memory-mapped register has actually reached the device   Mason
• Having Linux handle different "types" of memory   Mason
• Having Linux handle different "types" of memory   Mason
• arch/arm/kernel/setup.c does not compile at -O0   Mason
• arch/arm/kernel/setup.c does not compile at -O0   Mason
• arch/arm/kernel/setup.c does not compile at -O0   Mason
• arch/arm/kernel/setup.c does not compile at -O0   Mason
• arch/arm/kernel/setup.c does not compile at -O0   Mason
• Converting "board file" to device tree one device at a time?   Mason
• Converting "board file" to device tree one device at a time?   Mason
• Converting "board file" to device tree one device at a time?   Mason
• Converting "board file" to device tree one device at a time?   Mason
• [PATCH] arm64/kvm: Add generic v8 KVM target   Peter Maydell
• [PATCH] arm64/kvm: Add generic v8 KVM target   Peter Maydell
• [PATCH 05/10] KVM: arm/arm64: vgic: Relax vgic_can_sample_irq for edge IRQs   Peter Maydell
• [RFC PATCH] KVM: arm/arm64: Don't let userspace update CNTVOFF once guest is running   Peter Maydell
• [RFC PATCH] KVM: arm/arm64: Don't let userspace update CNTVOFF once guest is running   Peter Maydell
• [RFC PATCH] KVM: arm/arm64: Don't let userspace update CNTVOFF once guest is running   Peter Maydell
• [RFC PATCH] KVM: arm/arm64: Don't let userspace update CNTVOFF once guest is running   Peter Maydell
• [RFC PATCH] KVM: arm/arm64: Don't let userspace update CNTVOFF once guest is running   Peter Maydell
• mx6: suspicious RCU usage   Paul E. McKenney
• mx6: suspicious RCU usage   Paul E. McKenney
• mx6: suspicious RCU usage   Paul E. McKenney
• mx6: suspicious RCU usage   Paul E. McKenney
• mx6: suspicious RCU usage   Paul E. McKenney
• mx6: suspicious RCU usage   Paul E. McKenney
• [PATCH] [TWL4030 MADC] Fix ADC[3:6] readings   Peter Meerwald
• [PATCH] [TWL4030 MADC] Fix ADC[3:6] readings   Peter Meerwald
• [PATCH v2 1/4] PCI: iproc: enable arm64 support for iProc PCIe   Hauke Mehrtens
• [PATCH v2 3/4] arm64: Add Broadcom iProc family support   Hauke Mehrtens
• [PATCH] bcma: populate bus DT subnodes as platform_device-s   Hauke Mehrtens
• [PATCH] bcma: fix build error when build as module   Hauke Mehrtens
• [PATCH 1/2] ARM: BCM5301X: activate some additional options in pl310 cache controller   Hauke Mehrtens
• [PATCH 2/2] ARM: BCM5301X: Add profiling support   Hauke Mehrtens
• [PATCH] arm: dts: dra7: arch timer sits in always-on power domain   Nishanth Menon
• [PATCH] ARM: DRA7: Provide proper IO map table   Nishanth Menon
• [PATCH] ARM: dts: omap5-uevm: Add Palmas power button support   Nishanth Menon
• [PATCH 12/17] ARM: dts: am57xx-beagle-x15: Fix regulator populated in MMC1 dt node   Nishanth Menon
• [PATCH] thermal: cpu_cooling: Iterate over all CPUs in clip_cpu mask to get frequency table   Javi Merino
• [PATCH net-next] drivers: net: xgene: Fix the compilation error "error: implicit declaration of function 'acpi_evaluate_integer'" for CONFIG_ACPI=n.   David Miller
• [RFC Patch V1 07/12] sparc, PCI: Use helper functions to access fields in struct msi_desc   David Miller
• [RFT PATCH] net: axienet: Fix devm_ioremap_resource return value check   David Miller
• [PATCH] net: mvneta: fix refilling for Rx DMA buffers   David Miller
• [PATCH] net: mvneta: fix refilling for Rx DMA buffers   David Miller
• [PATCH 0/6] BPF JIT fixes and features for ARM   David Miller
• [PATCH v2] net: mvneta: fix refilling for Rx DMA buffers   David Miller
• [PATCH V2 net 0/3] BPF JIT fixes for ARM   David Miller
• [PATCH V2 net-next 0/3] ARM BPF JIT features   David Miller
• [PATCH V3 net-next 0/3] ARM BPF JIT features   David Miller
• [PATCH v2 0/3] Add MDIO support to ThunderX NIC driver   David Miller
• [PATCH net 00/11] net: thunderx: Misc fixes   David Miller
• [PATCH] bcma: populate bus DT subnodes as platform_device-s   Rafał Miłecki
• [PATCH 0/6] mmc: sdhci-esdhci-imx: fix cd/wp regression   Soeren Moch
• [PATCH 1/3] net: mdio-octeon: Modify driver to work on both ThunderX and Octeon   Radha Mohan
• [PATCH v2 0/3] Add MDIO support to ThunderX NIC driver   Radha Mohan
• drm/edid: sound/core: pcm_drm_eld.c compilation error in 4.2   Jean-Francois Moine
• [PATCH] drm/i2c: tda998x: Fix bad checksum of the HDMI AVI infoframe   Jean-Francois Moine
• [PATCH v2] drm/i2c: tda998x: Fix bad checksum of the HDMI AVI infoframe   Jean-Francois Moine
• [PATCH] sched, arm64: Fix the fallout of increasing the offset of 'thread_struct' within 'task_struct'   Ingo Molnar
• [PATCH] arm64: Minor refactoring of cpu_switch_to() to fix build breakage   Ingo Molnar
• [PATCH v2 05/20] block/xen-blkfront: Split blkif_queue_request in 2   Roger Pau Monné
• [PATCH v2 06/20] block/xen-blkfront: Store a page rather a pfn in the grant structure   Roger Pau Monné
• [PATCH v2 07/20] block/xen-blkfront: split get_grant in 2   Roger Pau Monné
• [PATCH v2 15/20] block/xen-blkfront: Make it running on 64KB page granularity   Roger Pau Monné
• [RFC] ARM: EXYNOS: reset KFC cores when cpu is up   Anand Moon
• [PATCH] clk: s2mps11: Use kcalloc instead of kzalloc for array allocation   Anand Moon
• ACPI: regression: Failed to initialize GIC IRQ controller   Moore, Robert
• ACPI: regression: Failed to initialize GIC IRQ controller   Moore, Robert
• ACPI: regression: Failed to initialize GIC IRQ controller   Moore, Robert
• ACPI: regression: Failed to initialize GIC IRQ controller   Moore, Robert
• [PATCH v3 2/5] PCI: designware: Add ARM64 support   James Morse
• [PATCH v3 2/5] PCI: designware: Add ARM64 support   James Morse
• [PATCH v3 2/5] PCI: designware: Add ARM64 support   James Morse
• [PATCH 0/5] arm64: kernel: Add support for Privileged Access Never   James Morse
• [PATCH 1/5] arm64: kernel: preparatory: Move config_sctlr_el1   James Morse
• [PATCH 2/5] arm64: kernel: Add cpufeature 'enable' callback.   James Morse
• [PATCH 3/5] arm64: kernel: Add min/max values in feature-detection register values.   James Morse
• [PATCH 4/5] arm64: kernel: Add optional CONFIG_ parameter to ALTERNATIVE().   James Morse
• [PATCH 5/5] arm64: kernel: Add support for Privileged Access Never   James Morse
• [PATCH 3/5] arm64: kernel: Add min/max values in feature-detection register values.   James Morse
• [PATCH v2 0/6] arm64: kernel: Add support for Privileged Access Never   James Morse
• [PATCH v2 1/6] arm64: kernel: Add cpuid_feature_extract_field() for 4bit sign extension   James Morse
• [PATCH v2 2/6] arm64: kernel: preparatory: Move config_sctlr_el1   James Morse
• [PATCH v2 3/6] arm64: kernel: Add cpufeature 'enable' callback   James Morse
• [PATCH v2 4/6] arm64: kernel: Add min_register_value and use '>=' for feature detection   James Morse
• [PATCH v2 5/6] arm64: kernel: Add optional CONFIG_ parameter to ALTERNATIVE()   James Morse
• [PATCH v2 6/6] arm64: kernel: Add support for Privileged Access Never   James Morse
• [PATCH v3 0/6] arm64: kernel: Add support for Privileged Access Never   James Morse
• [PATCH v3 1/6] arm64: kernel: Add cpuid_feature_extract_field() for 4bit sign extension   James Morse
• [PATCH v3 2/6] arm64: kernel: preparatory: Move config_sctlr_el1   James Morse
• [PATCH v3 3/6] arm64: kernel: Add cpufeature 'enable' callback   James Morse
• [PATCH v3 4/6] arm64: kernel: Add min_field_value and use '>=' for feature detection   James Morse
• [PATCH v3 5/6] arm64: kernel: Add optional CONFIG_ parameter to ALTERNATIVE()   James Morse
• [PATCH v3 6/6] arm64: kernel: Add support for Privileged Access Never   James Morse
• [PATCH v3 6/6] arm64: kernel: Add support for Privileged Access Never   James Morse
• [PATCH v4] arm64: kernel: Add support for Privileged Access Never   James Morse
• [PATCH v3 6/6] arm64: kernel: Add support for Privileged Access Never   James Morse
• [PATCH v4] arm64: kernel: Add support for Privileged Access Never   James Morse
• [PATCH V4 2/6] mm: mlock: Add new mlock, munlock, and munlockall system calls   Andrew Morton
• [PATCH] lib: Make _find_next_bit helper function inline   Andrew Morton
• [3.19.y-ckt stable] Patch "clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier" has been added to staging queue   Kamal Mostafa
• [PATCH 3.19.y-ckt 173/251] clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier   Kamal Mostafa
• [3.13.y-ckt stable] Patch "clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier" has been added to staging queue   Kamal Mostafa
• [PATCH 3.13.y-ckt 091/132] clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier   Kamal Mostafa
• [PATCH V3 2/5] mm: mlock: Add new mlock, munlock, and munlockall system calls   Eric B Munson
• [PATCH V4 2/6] mm: mlock: Add new mlock, munlock, and munlockall system calls   Eric B Munson
• [PATCH V4 2/6] mm: mlock: Add new mlock, munlock, and munlockall system calls   Eric B Munson
• [PATCH V4 2/6] mm: mlock: Add new mlock, munlock, and munlockall system calls   Eric B Munson
• [PATCH V4 2/6] mm: mlock: Add new mlock, munlock, and munlockall system calls   Eric B Munson
• [PATCH V4 2/6] mm: mlock: Add new mlock, munlock, and munlockall system calls   Eric B Munson
• [PATCH V5 2/7] mm: mlock: Add new mlock system call   Eric B Munson
• [PATCH V6 2/6] mm: mlock: Add new mlock system call   Eric B Munson
• [PATCH 4/4] ARM: omap2: restore OMAP4 barrier behaviour   Dan Murphy
• [PATCH v2 2/4] iommu: Implement common IOMMU ops for DMA mapping   Robin Murphy
• [PATCH v2 5/9] iommu/arm-smmu: skip the execution of CMD_PREFETCH_CONFIG   Robin Murphy
• [PATCH v2 6/9] iommu/arm-smmu: to support probe deferral   Robin Murphy
• [PATCH v2 7/9] iommu/arm-smmu: remove arm_smmu_devices   Robin Murphy
• [PATCH v2 9/9] iommu/arm-smmu: add support for non-pci devices   Robin Murphy
• [PATCH v2 9/9] iommu/arm-smmu: add support for non-pci devices   Robin Murphy
• [PATCH v3 0/4] arm64: IOMMU-backed DMA mapping   Robin Murphy
• [PATCH v3 1/4] iommu/iova: Avoid over-allocating when size-aligned   Robin Murphy
• [PATCH v3 2/4] iommu: Implement common IOMMU ops for DMA mapping   Robin Murphy
• [PATCH v3 3/4] arm64: Add IOMMU dma_ops   Robin Murphy
• [PATCH v3 4/4] arm64: Hook up IOMMU dma_ops   Robin Murphy
• [PATCH v3 2/4] iommu: Implement common IOMMU ops for DMA mapping   Robin Murphy
• [PATCH v3 3/4] arm64: Add IOMMU dma_ops   Robin Murphy
• [PATCH v4 0/4] arm64: IOMMU-backed DMA mapping   Robin Murphy
• [PATCH v4 1/4] iommu/iova: Avoid over-allocating when size-aligned   Robin Murphy
• [PATCH v4 2/4] iommu: Implement common IOMMU ops for DMA mapping   Robin Murphy
• [PATCH v4 3/4] arm64: Add IOMMU dma_ops   Robin Murphy
• [PATCH v4 4/4] arm64: Hook up IOMMU dma_ops   Robin Murphy
• [PATCH 1/2] arm64: dma-mapping: implement dma_get_sgtable()   Robin Murphy
• [PATCH 2/2] arm64: dma-mapping: consolidate __swiotlb_mmap()   Robin Murphy
• [PATCH 1/2] arm64: dma-mapping: implement dma_get_sgtable()   Robin Murphy
• [PATCH v4 0/4] arm64: IOMMU-backed DMA mapping   Robin Murphy
• [PATCH v3 0/5] iommu/arm-smmu: add support for non-pci devices   Robin Murphy
• [PATCH 3/3] Docs: dt: add PCI IOMMU map bindings   Robin Murphy
• [PATCH v3 5/6] iommu/mediatek: Add mt8173 IOMMU driver   Robin Murphy
• [PATCH v3 3/6] iommu: add ARM short descriptor page table allocator.   Robin Murphy
• [PATCH v3 5/6] iommu/mediatek: Add mt8173 IOMMU driver   Robin Murphy
• [PATCH v2 1/9] iommu/io-pgtable-arm: Allow appropriate DMA API use   Robin Murphy
• [PATCH v2 2/9] iommu/arm-smmu: Sort out coherency   Robin Murphy
• [PATCH v2 3/9] iommu/arm-smmu: Clean up DMA API usage   Robin Murphy
• [PATCH v2 4/9] iommu/arm-smmu-v3: Clean up DMA API usage   Robin Murphy
• [PATCH v2 5/9] iommu/ipmmu-vmsa: Clean up DMA API usage   Robin Murphy
• [PATCH v2 6/9] iommu/io-pgtable-arm: Centralise sync points   Robin Murphy
• [PATCH v2 7/9] iommu/arm-smmu: Remove arm_smmu_flush_pgtable()   Robin Murphy
• [PATCH v2 8/9] iommu/arm-smmu-v3: Remove arm_smmu_flush_pgtable()   Robin Murphy
• [PATCH v2 9/9] iommu/io-pgtable: Remove flush_pgtable callback   Robin Murphy
• arch/arm/kernel/setup.c does not compile at -O0   Robin Murphy
• [PATCH] iommu/arm-smmu-v2: ThunderX(errata-23399) mis-extends 64bit registers   Robin Murphy
• [PATCH v5 0/3] arm64: IOMMU-backed DMA mapping   Robin Murphy
• [PATCH v5 1/3] iommu: Implement common IOMMU ops for DMA mapping   Robin Murphy
• [PATCH v5 2/3] arm64: Add IOMMU dma_ops   Robin Murphy
• [PATCH v5 3/3] arm64: Hook up IOMMU dma_ops   Robin Murphy
• [PATCH] arm64: dma-mapping: Simplify pgprot handling   Robin Murphy
• [PATCH v2 0/6] arm64: kernel: Add support for Privileged Access Never   Vladimir Murzin
• [PATCH] arm64: KVM: remove remaining reference to vgic_sr_vectors   Vladimir Murzin
• [PATCH 3/4] ARM: omap2plus_defconfig: enable support for TI CPTS   Mugunthan V N
• [PATCH v5] arm DMA: Fix allocation from CMA for coherent DMA   Lorenzo Nava
• [PATCH v5] arm DMA: Fix allocation from CMA for coherent DMA   Lorenzo Nava
• [PATCH v5] arm DMA: Fix allocation from CMA for coherent DMA   Lorenzo Nava
• [PATCH v5] arm DMA: Fix allocation from CMA for coherent DMA   Lorenzo Nava
• [PATCH] i2c: s3c2410: remove unused variable   Laurent Navet
• [PATCH V2] i2c: s3c2410: remove unused variable   Laurent Navet
• [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC   Sylwester Nawrocki
• [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC   Sylwester Nawrocki
• [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC   Sylwester Nawrocki
• [PATCH 0/9] qcom: Add support for TSENS driver   Rajendra Nayak
• [PATCH 1/9] thermal: qcom: tsens: Add a skeletal TSENS drivers   Rajendra Nayak
• [PATCH 2/9] thermal: qcom: tsens-8916: Add support for 8916 family of SoCs   Rajendra Nayak
• [PATCH 3/9] thermal: qcom: tsens-8974: Add support for 8974 family of SoCs   Rajendra Nayak
• [PATCH 4/9] thermal: qcom: tsens-8960: Add support for 8960 family of SoCs   Rajendra Nayak
• [PATCH 5/9] clk: qcom: gcc-msm8960: add child devices support.   Rajendra Nayak
• [PATCH 6/9] arm: dts: msm8974: Add thermal zones, tsens and eeprom nodes   Rajendra Nayak
• [PATCH 7/9] arm: dts: apq8064: Add thermal zones, tsens and eeprom nodes   Rajendra Nayak
• [PATCH 8/9] arm: dts: apq8084: Add thermal zones, tsens and eeprom nodes   Rajendra Nayak
• [PATCH 9/9] arm64: dts: msm8916: Add thermal zones, tsens and eeprom nodes   Rajendra Nayak
• [PATCH v6 00/13] qcom: Add support for GDSCs   Rajendra Nayak
• [PATCH v6 01/13] clk: qcom: Add support for GDSCs   Rajendra Nayak
• [PATCH v6 02/13] clk: qcom: gdsc: Prepare common clk probe to register gdscs   Rajendra Nayak
• [PATCH v6 03/13] clk: qcom: gdsc: Use PM clocks to control gdsc clocks   Rajendra Nayak
• [PATCH v6 04/13] clk: qcom: gdsc: Manage clocks with !CONFIG_PM   Rajendra Nayak
• [PATCH v6 05/13] clk: qcom: gdsc: Enable an RCG before turing on the gdsc   Rajendra Nayak
• [PATCH v6 06/13] clk: qcom: gdsc: Add support for Memory RET/OFF   Rajendra Nayak
• [PATCH v6 07/13] clk: qcom: gdsc: Add support for ON only state   Rajendra Nayak
• [PATCH v6 08/13] clk: qcom: gdsc: Add GDSCs in msm8916 GCC   Rajendra Nayak
• [PATCH v6 09/13] clk: qcom: gdsc: Add GDSCs in msm8974 GCC   Rajendra Nayak
• [PATCH v6 10/13] clk: qcom: gdsc: Add GDSCs in msm8974 MMCC   Rajendra Nayak
• [PATCH v6 11/13] clk: qcom: gdsc: Add GDSCs in apq8084 GCC   Rajendra Nayak
• [PATCH v6 12/13] clk: qcom: gdsc: Add GDSCs in apq8084 MMCC   Rajendra Nayak
• [PATCH v6 13/13] arm: dts: qcom: Add #power-domain-cells property   Rajendra Nayak
• [PATCH v6 03/13] clk: qcom: gdsc: Use PM clocks to control gdsc clocks   Rajendra Nayak
• [PATCH v6 04/13] clk: qcom: gdsc: Manage clocks with !CONFIG_PM   Rajendra Nayak
• [PATCH v6 08/13] clk: qcom: gdsc: Add GDSCs in msm8916 GCC   Rajendra Nayak
• [PATCH v6 01/13] clk: qcom: Add support for GDSCs   Rajendra Nayak
• [PATCH v6 03/13] clk: qcom: gdsc: Use PM clocks to control gdsc clocks   Rajendra Nayak
• [PATCH v7 00/13] qcom: Add support for GDSCs   Rajendra Nayak
• [PATCH v7 01/13] clk: qcom: Add support for GDSCs   Rajendra Nayak
• [PATCH v7 02/13] clk: qcom: gdsc: Prepare common clk probe to register gdscs   Rajendra Nayak
• [PATCH v7 03/13] clk: qcom: gdsc: Use PM clocks to control gdsc clocks   Rajendra Nayak
• [PATCH v7 04/13] clk: qcom: gdsc: Manage clocks with !CONFIG_PM   Rajendra Nayak
• [PATCH v7 05/13] clk: qcom: gdsc: Enable an RCG before turing on the gdsc   Rajendra Nayak
• [PATCH v7 06/13] clk: qcom: gdsc: Add support for Memory RET/OFF   Rajendra Nayak
• [PATCH v7 07/13] clk: qcom: gdsc: Add support for ON only state   Rajendra Nayak
• [PATCH v7 08/13] clk: qcom: gdsc: Add GDSCs in msm8916 GCC   Rajendra Nayak
• [PATCH v7 09/13] clk: qcom: gdsc: Add GDSCs in msm8974 GCC   Rajendra Nayak
• [PATCH v7 10/13] clk: qcom: gdsc: Add GDSCs in msm8974 MMCC   Rajendra Nayak
• [PATCH v7 11/13] clk: qcom: gdsc: Add GDSCs in apq8084 GCC   Rajendra Nayak
• [PATCH v7 12/13] clk: qcom: gdsc: Add GDSCs in apq8084 MMCC   Rajendra Nayak
• [PATCH v7 13/13] arm: dts: qcom: Add #power-domain-cells property   Rajendra Nayak
• [PATCH v6 04/13] clk: qcom: gdsc: Manage clocks with !CONFIG_PM   Rajendra Nayak
• [PATCH v9 0/9] Add simple NVMEM Framework via regmap.   Rajendra Nayak
• [PATCH v6 04/13] clk: qcom: gdsc: Manage clocks with !CONFIG_PM   Rajendra Nayak
• [PATCH v2 1/5] usb: gadget: ffs: call functionfs_unbind() if _ffs_func_bind() fails   Michal Nazarewicz
• [PATCH v2 2/5] usb: gadget: midi: avoid redundant f_midi_set_alt() call   Michal Nazarewicz
• [PATCH v2 3/5] usb: isp1760: udc: add missing usb_ep_set_maxpacket_limit()   Michal Nazarewicz
• [PATCH v2 4/5] staging: emxx_udc: add missing usb_ep_set_maxpacket_limit()   Michal Nazarewicz
• [PATCH v2 5/5] usb: gadget: atmel_usba_udc: add missing ret value check   Michal Nazarewicz
• [PATCH v2] imx: thermal: use CPU temperature grade info for thresholds   Jon Nettleton
• [PATCH v2] imx: thermal: use CPU temperature grade info for thresholds   Jon Nettleton
• [PATCH v2] imx: thermal: use CPU temperature grade info for thresholds   Jon Nettleton
• [PATCH] imx: thermal: use CPU temperature grade info for thresholds   Jon Nettleton
• [PATCH 1/3] ARM: socfpga: dts: Fix adxl34x formating   Dinh Nguyen
• [PATCH] ARM: socfpga: put back v7_invalidate_l1 in socfpga_secondary_startup   Dinh Nguyen
• [PATCH] ARM: socfpga: put back v7_invalidate_l1 in socfpga_secondary_startup   Dinh Nguyen
• [PATCH] ARM: socfpga: put back v7_invalidate_l1 in socfpga_secondary_startup   Dinh Nguyen
• [PATCH] ARM: socfpga: put back v7_invalidate_l1 in socfpga_secondary_startup   Dinh Nguyen
• [PATCH] ARM: socfpga: put back v7_invalidate_l1 in socfpga_secondary_startup   Dinh Nguyen
• [PATCH] ARM: dts: socfpga: Add support of Terasic DE0 Atlas board   Dinh Nguyen
• [PATCH 3/6] pci:host: Add Altera PCIe host controller driver   Dinh Nguyen
• [PATCH 4/6] pci: altera: Add Altera PCIe MSI driver   Dinh Nguyen
• [PATCH 4/6] pci: altera: Add Altera PCIe MSI driver   Dinh Nguyen
• [PATCH] ARM: zx: Add power domains for ZX296702   Jun Nie
• [PATCH 3/3] arm: dts: ls1021a: Add snps, configure-gfladj property to USB3 node   Badola Nikhil
• [PATCH 0/4] ARM: omap2plus_defconfig updates   Sekhar Nori
• [PATCH 1/4] ARM: omap2plus_defconfig: enable support for TI ADC   Sekhar Nori
• [PATCH 2/4] ARM: omap2plus_defconfig: enable support for TI touchscreen   Sekhar Nori
• [PATCH 3/4] ARM: omap2plus_defconfig: enable support for TI CPTS   Sekhar Nori
• [PATCH 4/4] ARM: omap2plus_defconfig: enable support for M25P80 SPI NOR   Sekhar Nori
• [PATCH] ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake callback   Sekhar Nori
• [PATCH 0/2] ARM: OMAP2+: sparse fixes   Sekhar Nori
• [PATCH 1/2] ARM: OMAP2+: sparse: add missing static declaration   Sekhar Nori
• [PATCH 2/2] ARM: OMAP2+: sparse: add missing function declarations   Sekhar Nori
• [PATCH] ARM: edma: Clear IRQ if we get interrupted by a unknown event   Sekhar Nori
• [PATCH 0/2] ARM: dts: dra7x-evm: fix incorrect compatibles   Sekhar Nori
• [PATCH 1/2] ARM: dts: dra7-evm: fix compatible name for pcf8575   Sekhar Nori
• [PATCH 2/2] ARM: dts: dra72-evm: fix compatible name for pcf8575   Sekhar Nori
• [PATCH] ARM: dts: am437x: add aliases for all UART instances   Sekhar Nori
• [RESEND][PATCH 2/4] spi: davinci: Choose correct pre-scaler limit based on SOC   Sekhar Nori
• [RESEND][PATCH 3/4] ARM: davinci: Set proper SPI prescale limit value   Sekhar Nori
• [RFC PATCH 4/5] ARM: dts: DRA7: Add memory map region entries for qspi   Sekhar Nori
• [PATCH 1/2] ARM: BCM: Do not select CONFIG_MTD_NAND_BRCMNAND   Brian Norris
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Brian Norris
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Brian Norris
• [PATCH v5 1/2] mtd: nand: sunxi: Replace failsafe timing cfg with calculated value   Brian Norris
• [PATCH v5 07/12] mtd: nand: add Samsung K9GBG08U0A-M to nand_ids table   Brian Norris
• [Patch v3 1/5] mtd: nand: tegra: add devicetree binding   Brian Norris
• [Patch v3 5/5] ARM: tegra: enable NAND flash on Colibri T20   Brian Norris
• [Patch v3 2/5] mtd: nand: add NVIDIA Tegra NAND Flash controller driver   Brian Norris
• [Patch v3 1/5] mtd: nand: tegra: add devicetree binding   Brian Norris
• [Patch v3 2/5] mtd: nand: add NVIDIA Tegra NAND Flash controller driver   Brian Norris
• [Patch v3 2/5] mtd: nand: add NVIDIA Tegra NAND Flash controller driver   Brian Norris
• [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data   Brian Norris
• [RFC PATCH 4/5] ARM: dts: DRA7: Add memory map region entries for qspi   Brian Norris
• [PATCH v9 1/5] mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others   Brian Norris
• [PATCH v9 2/5] mtd: nand: vf610_nfc: add hardware BCH-ECC support   Brian Norris
• [PATCH v9 3/5] mtd: nand: vf610_nfc: add device tree bindings   Brian Norris
• [PATCH v9 2/5] mtd: nand: vf610_nfc: add hardware BCH-ECC support   Brian Norris
• [PATCH v9 2/5] mtd: nand: vf610_nfc: add hardware BCH-ECC support   Brian Norris
• [PATCH] ARM: OMAP: Fix typo in function signature   Nik Nyby
• [PATCH v3 01/46] usb: gadget: encapsulate endpoint claiming mechanism   Krzysztof Opasiak
• [PATCH v3 26/46] usb: gadget: pch_ud: add ep capabilities support   Krzysztof Opasiak
• [PATCH v2 4/9] arm: twr-k70f120m: timer driver for Kinetis SoC   Paul Osmialowski
• [PATCH v2 4/9] arm: twr-k70f120m: timer driver for Kinetis SoC   Paul Osmialowski
• [PATCH v2 4/9] arm: twr-k70f120m: timer driver for Kinetis SoC   Paul Osmialowski
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Paul Osmialowski
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Paul Osmialowski
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Paul Osmialowski
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Paul Osmialowski
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Paul Osmialowski
• [PATCH v2 6/9] arm: twr-k70f120m: extend Freescale eDMA driver with the ability to support Kinetis SoC   Paul Osmialowski
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Paul Osmialowski
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Paul Osmialowski
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Paul Osmialowski
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Paul Osmialowski
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Paul Osmialowski
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Paul Osmialowski
• [PATCH v2 19/20] xen/privcmd: Add support for Linux 64KB page granularity   Boris Ostrovsky
• [PATCH v2 19/20] xen/privcmd: Add support for Linux 64KB page granularity   Boris Ostrovsky
• [PATCH 4/8] xen: Use the correctly the Xen memory terminologies   Boris Ostrovsky
• [PATCH 4/8] xen: Use the correctly the Xen memory terminologies   Boris Ostrovsky
• [PATCH 4/8] xen: Use the correctly the Xen memory terminologies   Boris Ostrovsky
• [RFC Patch V1 04/12] s390/pci: Use for_pci_msi_entry() to access MSI device list   Sebastian Ott
• [PATCH] pinctrl: at91: fix null pointer dereference   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pinctrl: at91: fix null pointer dereference   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 2/5] PCI: designware: Add ARM64 support   Gabriele Paoloni
• [PATCH v3 2/5] PCI: designware: Add ARM64 support   Gabriele Paoloni
• [PATCH v3 2/5] PCI: designware: Add ARM64 support   Gabriele Paoloni
• [PATCH] Store PCIe controllers address in struct of_pci_range   Gabriele Paoloni
• [PATCH v3 2/5] PCI: designware: Add ARM64 support   Gabriele Paoloni
• [PATCH] Store PCIe controllers address in struct of_pci_range   Gabriele Paoloni
• [PATCH] Store PCIe controllers address in struct of_pci_range   Gabriele Paoloni
• [PATCH v2] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v3 1/5] ARM/PCI: remove align_resource callback in pcibios_align_resource   Gabriele Paoloni
• [PATCH v2 2/4] PCI: designware: Add ARM64 support   Gabriele Paoloni
• [PATCH v2] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v2] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v3] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v3] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v4] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v4] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v5] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v5] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v5 1/5] ARM/PCI: remove align_resource in pci_sys_data   Gabriele Paoloni
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Gabriele Paoloni
• [PATCH] pinctrl: imx1-core: Fix debug output pin array index   Markus Pargmann
• [PATCH] pinctrl: imx1-core: Fix debug output pin array index   Markus Pargmann
• [PATCH] pinctrl: imx1-core: Fix debug output pin array index   Markus Pargmann
• [PATCH] Subject: pinctrl: imx1-core: Fix debug output in .pin_config_set callback   Markus Pargmann
• [PATCH 0/9] gpiolib: Add GPIO name support   Markus Pargmann
• [PATCH 1/9] gpiolib: Fix possible use of wrong name   Markus Pargmann
• [PATCH 2/9] gpiolib-of: Rename gpio_hog functions to be generic   Markus Pargmann
• [PATCH 3/9] gpio: Allow hogged gpios to be requested   Markus Pargmann
• [PATCH 4/9] gpio: Add 'name' to the gpio descriptor struct   Markus Pargmann
• [PATCH 5/9] gpiolib: Implement gpio_name_to_desc()   Markus Pargmann
• [PATCH 6/9] gpiolib-of: Reuse 'line-name' from DT as gpio descriptor name   Markus Pargmann
• [PATCH 7/9] gpiolib-sysfs: Add gpio name parsing for sysfs export   Markus Pargmann
• [PATCH 8/9] gpiolib-sysfs: Show gpio-name in /sys/class/gpio/gpio*/name   Markus Pargmann
• [PATCH 9/9] gpiolib: Add gpio name information to /sys/kernel/debug/gpio   Markus Pargmann
• [PATCH 3/9] gpio: Allow hogged gpios to be requested   Markus Pargmann
• [PATCH 3/9] gpio: Allow hogged gpios to be requested   Markus Pargmann
• [PATCH 0/9] gpiolib: Add GPIO name support   Markus Pargmann
• [PATCH 1/9] gpiolib: Fix possible use of wrong name   Markus Pargmann
• [PATCH 3/9] gpio: Allow hogged gpios to be requested   Markus Pargmann
• [PATCH 6/9] gpiolib-of: Reuse 'line-name' from DT as gpio descriptor name   Markus Pargmann
• [PATCH 7/9] gpiolib-sysfs: Add gpio name parsing for sysfs export   Markus Pargmann
• [PATCH 8/9] gpiolib-sysfs: Show gpio-name in /sys/class/gpio/gpio*/name   Markus Pargmann
• [PATCH 9/9] gpiolib: Add gpio name information to /sys/kernel/debug/gpio   Markus Pargmann
• [PATCH 9/9] gpiolib: Add gpio name information to /sys/kernel/debug/gpio   Markus Pargmann
• [PATCH 0/9] gpiolib: Add GPIO name support   Markus Pargmann
• [PATCHv4] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Chanho Park
• [PATCHv4] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Chanho Park
• [PATCHv5] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Chanho Park
• [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Chanho Park
• [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Chanho Park
• [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Chanho Park
• [RFC] ARM: EXYNOS: reset KFC cores when cpu is up   Chanho Park
• [RFC] ARM: EXYNOS: reset KFC cores when cpu is up   Chanho Park
• [RFC] ARM: EXYNOS: reset KFC cores when cpu is up   Chanho Park
• [RFC] ARM: EXYNOS: reset KFC cores when cpu is up   Chanho Park
• [PATCH v7 1/9] nvmem: Add a simple NVMEM framework for nvmem providers   Joe Perches
• [PATCH v7 2/9] nvmem: Add a simple NVMEM framework for consumers   Joe Perches
• [PATCH v7 3/9] nvmem: Add nvmem_device based consumer apis.   Joe Perches
• [PATCH 02/12] [media] dvb-pll: Add support for THOMSON DTT7546X tuner.   Joe Perches
• [PATCH 1/2] ARM: dts: rockchip: Use correct dts properties for tsadc node   Romain Perier
• [PATCH 1/2] ARM: dts: rockchip: Use correct dts properties for tsadc node   Romain Perier
• [PATCH 2/2] ARM: dts: rockchip: Add veyron-speedy board   Romain Perier
• [PATCH 1/2] ARM: dts: rockchip: Use correct dts properties for tsadc node   Romain Perier
• [PATCH v2] ARM: dts: rockchip: Add veyron-speedy board   Romain Perier
• [PATCH v2] ARM: dts: rockchip: Add veyron-speedy board   Romain Perier
• [PATCH 0/5] Host1x/TegraDRM fixes/improvements   Mikko Perttunen
• [PATCH 1/5] host1x: Store device address to all bufs   Mikko Perttunen
• [PATCH 2/5] host1x: Pass register value in firewall   Mikko Perttunen
• [PATCH 3/5] host1x: Handle HOST1X class address registers directly   Mikko Perttunen
• [PATCH 4/5] drm/tegra: Support kernel mappings with IOMMU   Mikko Perttunen
• [PATCH 5/5] drm/tegra: Add Tegra DRM allocation API   Mikko Perttunen
• [PATCH v2 0/4] Add VIC support for Tegra124   Mikko Perttunen
• [PATCH v2 1/4] drm/tegra: Add falcon helper library   Mikko Perttunen
• [PATCH v2 2/4] drm/tegra: Add VIC support   Mikko Perttunen
• [PATCH v2 3/4] of: Add NVIDIA Tegra VIC binding   Mikko Perttunen
• [PATCH v2 4/4] ARM: tegra: Add VIC for Tegra124   Mikko Perttunen
• [PATCH v2 2/4] drm/tegra: Add VIC support   Mikko Perttunen
• [PATCH v2 3/4] of: Add NVIDIA Tegra VIC binding   Mikko Perttunen
• [PATCH v2 1/4] ARM: mvebu: Use __init for the PM initialization functions   Thomas Petazzoni
• [PATCH v2 2/4] ARM: mvebu: Add standby support   Thomas Petazzoni
• [PATCH v2 3/4] ARM: mvebu: Allow using the GIC for wakeup in standby mode   Thomas Petazzoni
• [PATCH v2 4/4] ARM: mvebu: Warn about the wake-up sources not taken into account in suspend   Thomas Petazzoni
• [PATCH v2 2/4] ARM: mvebu: Add standby support   Thomas Petazzoni
• [PATCH v2 2/4] ARM: mvebu: Add standby support   Thomas Petazzoni
• [PATCH 0/2] ARM: mvebu: clear shared L2 bit on Armada XP   Thomas Petazzoni
• [PATCH 1/2] ARM: mvebu: add support to clear shared L2 bit on Armada XP   Thomas Petazzoni
• [PATCH 2/2] ARM: mvebu: add CPU config registers in the Armada 370/XP Device Tree   Thomas Petazzoni
• [PATCHv4 0/6] dmaengine: mv_xor fixes and improvements   Thomas Petazzoni
• [PATCHv4 1/6] dmaengine: mv_xor: fix big endian operation in register mode   Thomas Petazzoni
• [PATCHv4 2/6] dmaengine: mv_xor: add suspend/resume support   Thomas Petazzoni
• [PATCHv4 3/6] dmaengine: mv_xor: remove support for dmacap, * DT properties   Thomas Petazzoni
• [PATCHv4 4/6] dmaengine: mv_xor: remove mv_xor_chan->current_type field   Thomas Petazzoni
• [PATCHv4 5/6] dmaengine: mv_xor: de-duplicate mv_chan_set_mode*()   Thomas Petazzoni
• [PATCHv4 6/6] dmaengine: mv_xor: optimize performance by using a subset of the XOR channels   Thomas Petazzoni
• [PATCHv2 0/8] ARM: mvebu: add suspend to RAM support for Armada 38x   Thomas Petazzoni
• [PATCHv2 1/8] ARM: mvebu: prepare set_cpu_coherent() for future extension   Thomas Petazzoni
• [PATCHv2 2/8] ARM: mvebu: do not check machine in mvebu_pm_init()   Thomas Petazzoni
• [PATCHv2 3/8] ARM: mvebu: prepare mvebu_pm_store_bootinfo() to support multiple SoCs   Thomas Petazzoni
• [PATCHv2 4/8] ARM: mvebu: prepare pm-board.c for the introduction of Armada 38x support   Thomas Petazzoni
• [PATCHv2 5/8] ARM: mvebu: add suspend/resume support for Armada 38x   Thomas Petazzoni
• [PATCHv2 6/8] ARM: mvebu: add suspend/resume related definitions in Armada 38x Device Tree   Thomas Petazzoni
• [PATCHv2 7/8] ARM: mvebu: add suspend/resume DT information for Armada 388 GP   Thomas Petazzoni
• [PATCHv2 8/8] ARM: mvebu: adjust board name and compatible for Armada 388 GP   Thomas Petazzoni
• Linux on Armada 370   Thomas Petazzoni
• [PATCH v2 1/2] dmaengine: Add an enum for the dmaengine alignment constraints   Thomas Petazzoni
• [PATCH v2 1/2] dmaengine: Add an enum for the dmaengine alignment constraints   Thomas Petazzoni
• [PATCHv4 3/6] dmaengine: mv_xor: remove support for dmacap,* DT properties   Thomas Petazzoni
• [PATCHv4 2/6] dmaengine: mv_xor: add suspend/resume support   Thomas Petazzoni
• [PATCH 16/20] power/reset: at91-reset: remove useless at91_reset_platform_probe()   Thomas Petazzoni
• [PATCH 19/20] clocksource: atmel-st: get and use slow clock   Thomas Petazzoni
• [PATCH v2 2/3] edac: Add L3/SoC support to the APM X-Gene SoC EDAC driver   Borislav Petkov
• [PATCH v2 2/3] edac: Add L3/SoC support to the APM X-Gene SoC EDAC driver   Borislav Petkov
• [PATCH v2 2/3] edac: Add L3/SoC support to the APM X-Gene SoC EDAC driver   Borislav Petkov
• [RFC] arm: psci: implement cpuidle_ops   Lorenzo Pieralisi
• [RFC PATCH 2/3] arm: psci: enable PSCI on UP systems   Lorenzo Pieralisi
• [RFC PATCH 3/3] arm: psci: add cpuidle_ops support   Lorenzo Pieralisi
• [PATCH v2 0/5] drivers: firmware: psci: add basic v1.0 support   Lorenzo Pieralisi
• [PATCH v2 1/5] drivers: firmware: psci: add INVALID_ADDRESS return value   Lorenzo Pieralisi
• [PATCH v2 2/5] drivers: firmware: psci: move power_state handling to generic code   Lorenzo Pieralisi
• [PATCH v2 3/5] drivers: firmware: psci: add PSCI_FEATURES call   Lorenzo Pieralisi
• [PATCH v2 4/5] drivers: firmware: psci: add extended stateid power_state support   Lorenzo Pieralisi
• [PATCH v2 5/5] drivers: firmware: psci: add PSCI v1.0 DT bindings   Lorenzo Pieralisi
• [PATCH v2 1/2] firmware: psci: move cpu_suspend handling to generic code   Lorenzo Pieralisi
• [PATCH v2 2/2] arm: kernel: implement cpuidle_ops with psci backend   Lorenzo Pieralisi
• [PATCH] ARM: kvm: prevent freeing boot_hyp_pgd when CPU_PM is selected   Lorenzo Pieralisi
• [PATCH v3 2/3] ARM: cpuidle: refine cpuidle_ops member's parameters.   Lorenzo Pieralisi
• [PATCH v3 00/15] Introducing per-device MSI domain   Lorenzo Pieralisi
• [PATCH v3 00/15] Introducing per-device MSI domain   Lorenzo Pieralisi
• ACPI: regression: Failed to initialize GIC IRQ controller   Lorenzo Pieralisi
• ACPI: regression: Failed to initialize GIC IRQ controller   Lorenzo Pieralisi
• ACPI: regression: Failed to initialize GIC IRQ controller   Lorenzo Pieralisi
• [RFT PATCH] ARM: pci: kill pcibios_msi_controller   Lorenzo Pieralisi
• [PATCH v2 2/4] PCI: designware: Add ARM64 support   Lorenzo Pieralisi
• [PATCH v2 2/4] PCI: designware: Add ARM64 support   Lorenzo Pieralisi
• [PATCH v2 2/2] ARM64: kernel: unify ACPI and DT cpus initialization   Lorenzo Pieralisi
• [RFC PATCH v2 1/1] drivers: cpuidle: cpuidle-arm: heterogeneous systems extension   Lorenzo Pieralisi
• [RFC PATCH v2 1/1] drivers: cpuidle: cpuidle-arm: heterogeneous systems extension   Lorenzo Pieralisi
• [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend   Lorenzo Pieralisi
• [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend   Lorenzo Pieralisi
• [PATCH] ARM64: kernel: implement ACPI parking protocol   Lorenzo Pieralisi
• [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend   Lorenzo Pieralisi
• [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend   Lorenzo Pieralisi
• [PATCH 3/5] arm64, pci: Allow RC drivers to supply pcibios_add_device() implementation.   Lorenzo Pieralisi
• [PATCH 5/5] PCI: Add host drivers for Cavium ThunderX processors.   Lorenzo Pieralisi
• [PATCH] ARM64: kernel: implement ACPI parking protocol   Lorenzo Pieralisi
• [PATCH] ARM64: kernel: implement ACPI parking protocol   Lorenzo Pieralisi
• [PATCH 3/5] arm64, pci: Allow RC drivers to supply pcibios_add_device() implementation.   Lorenzo Pieralisi
• [PATCH 0/1] ARM: cpuidle: heterogeneous systems extension   Lorenzo Pieralisi
• [PATCH 1/1] drivers: cpuidle: cpuidle-arm: heterogeneous systems extension   Lorenzo Pieralisi
• [PATCH 2/5] genirq: irqdomain: Remove irqdomain dependency on struct device_node   Lorenzo Pieralisi
• [PATCH 5/5] irqchip: GIC: Switch ACPI support to stacked domains   Lorenzo Pieralisi
• [PATCH 4/5] acpi: gsi: Use acpi_gsi_descriptor to allocate interrupts   Lorenzo Pieralisi
• [RFT PATCH] ARM: pci: kill pcibios_msi_controller   Lorenzo Pieralisi
• [RFT PATCH] ARM: pci: kill pcibios_msi_controller   Lorenzo Pieralisi
• [RFT PATCH] ARM: pci: kill pcibios_msi_controller   Lorenzo Pieralisi
• [RFT PATCH] ARM: pci: kill pcibios_msi_controller   Lorenzo Pieralisi
• [PATCH v4 1/5] ARM/PCI: remove align_resource in pci_sys_data   Lorenzo Pieralisi
• [PATCH v2 1/2] ARM: PCI: bios32: replace panic with WARN messages on failures   Lorenzo Pieralisi
• [PATCH v2 2/2] ARM: pci: kill pcibios_msi_controller   Lorenzo Pieralisi
• [PATCH v2 7/7] acpi: gsi: Cleanup acpi_register_gsi   Lorenzo Pieralisi
• [PATCH v2 6/7] irqchip: GIC: Switch ACPI support to stacked domains   Lorenzo Pieralisi
• [PATCH v2 5/7] acpi: gsi: Add acpi_set_irq_model to initialize the GSI layer   Lorenzo Pieralisi
• [PATCH v2 2/2] ARM: pci: kill pcibios_msi_controller   Lorenzo Pieralisi
• [PATCH v2 2/2] ARM: pci: kill pcibios_msi_controller   Lorenzo Pieralisi
• [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend   Lorenzo Pieralisi
• [PATCH v2 2/2] ARM: pci: kill pcibios_msi_controller   Lorenzo Pieralisi
• [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend   Lorenzo Pieralisi
• [PATCH v2 2/2] ARM: pci: kill pcibios_msi_controller   Lorenzo Pieralisi
• [PATCH v3 1/2] ARM: PCI: bios32: replace panic with WARN messages on failures   Lorenzo Pieralisi
• [PATCH v3 2/2] ARM: pci: kill pcibios_msi_controller   Lorenzo Pieralisi
• [PATCH v5 1/5] ARM/PCI: remove align_resource in pci_sys_data   Lorenzo Pieralisi
• [PATCH v3 2/2] ARM: pci: kill pcibios_msi_controller   Lorenzo Pieralisi
• [PATCH v4 1/2] ARM: PCI: bios32: replace panic with WARN messages on failures   Lorenzo Pieralisi
• [PATCH v4 2/2] ARM: pci: kill pcibios_msi_controller   Lorenzo Pieralisi
• [PATCH 3/6] pci:host: Add Altera PCIe host controller driver   Lorenzo Pieralisi
• [PATCH v3 2/2] PCI: generic: add arm64 support   Lorenzo Pieralisi
• [PATCH v5 2/5] PCI: designware: Add ARM64 support   Lorenzo Pieralisi
• [PATCH v3 1/2] PCI: generic: remove dependency on hw_pci   Lorenzo Pieralisi
• [PATCH] ARM64: PCI: do not enable resources on PROBE_ONLY systems   Lorenzo Pieralisi
• [PATCH v3 1/2] PCI: generic: remove dependency on hw_pci   Lorenzo Pieralisi
• [PATCH v3 1/2] PCI: generic: remove dependency on hw_pci   Lorenzo Pieralisi
• [PATCH v3 1/2] PCI: generic: remove dependency on hw_pci   Lorenzo Pieralisi
• [PATCH] ARM: shmobile: kzm9g dts: Add adxl345-specific compatible property   Laurent Pinchart
• [PATCH v2] ARM: shmobile: kzm9g dts: Use adxl345-specific compatible property   Laurent Pinchart
• [PATCH v2] ARM: shmobile: kzm9g dts: Use adxl345-specific compatible property   Laurent Pinchart
• [PATCH/RFC 06/11] ARM: shmobile: r8a7790: Link CPG to RST using "renesas, modemr"   Laurent Pinchart
• [PATCH/RFC 06/11] ARM: shmobile: r8a7790: Link CPG to RST using "renesas, modemr"   Laurent Pinchart
• [PATCH/RFC 06/11] ARM: shmobile: r8a7790: Link CPG to RST using "renesas, modemr"   Laurent Pinchart
• [PATCH 0/2] omap3isp: Remove legacy platform data support   Laurent Pinchart
• [PATCH 1/2] ARM: OMAP2+: Remove legacy OMAP3 ISP instantiation   Laurent Pinchart
• [PATCH 2/2] v4l: omap3isp: Drop platform data support   Laurent Pinchart
• [PATCH 1/2] ARM: OMAP2+: Remove legacy OMAP3 ISP instantiation   Laurent Pinchart
• macb: zynq: why is SG disabled?   Cyrille Pitchen
• [PATCH v4 0/5] tty/serial: at91: add support to FIFOs   Cyrille Pitchen
• [PATCH v4 1/5] ARM: at91/dt: add a new DT property to support FIFOs on Atmel USARTs   Cyrille Pitchen
• [PATCH v4 2/5] tty/serial: at91: fix some macro definitions to fit coding style   Cyrille Pitchen
• [PATCH v4 3/5] tty/serial: at91: remove bunch of macros to access UART registers   Cyrille Pitchen
• [PATCH v4 4/5] tty/serial: at91: add support to FIFOs   Cyrille Pitchen
• [PATCH v4 5/5] tty/serial: at91: use 32bit writes into TX FIFO when DMA is enabled   Cyrille Pitchen
• [PATCH v3 2/4] tty/serial: at91: fix some macro definitions to fit coding style   Cyrille Pitchen
• [PATCH 0/7] add driver for Atmel QSPI controller   Cyrille Pitchen
• [PATCH 1/7] Documentation: mtd: add a DT property to set the number of dummy cycles   Cyrille Pitchen
• [PATCH 2/7] mtd: spi-nor: notify (Q)SPI controller about protocol change   Cyrille Pitchen
• [PATCH 3/7] mtd: spi-nor: allow to tune the number of dummy cycles   Cyrille Pitchen
• [PATCH 4/7] Documentation: mtd: add a DT property to set the latency code of Spansion memory   Cyrille Pitchen
• [PATCH 5/7] mtd: spi-nor: allow the set the latency code on Spansion memories   Cyrille Pitchen
• [PATCH 6/7] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver   Cyrille Pitchen
• [PATCH 7/7] mtd: atmel-quadspi: add driver for Atmel QSPI controller   Cyrille Pitchen
• [PATCH 6/7] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver   Cyrille Pitchen
• [PATCH 7/7] mtd: atmel-quadspi: add driver for Atmel QSPI controller   Cyrille Pitchen
• [PATCH 4/7] Documentation: mtd: add a DT property to set the latency code of Spansion memory   Cyrille Pitchen
• [PATCH v4 2/2] mfd: flexcom: add a driver for Atmel Flexible Serial Communication Unit   Cyrille Pitchen
• [PATCH v4 1/2] mfd: devicetree: add bindings for Atmel Flexcom   Cyrille Pitchen
• [PATCH v5 0/3] mfd: flexcom: add a driver for Flexcom   Cyrille Pitchen
• [PATCH v5 1/3] mfd: atmel-flexcom: create include file with macros used by DT bindings   Cyrille Pitchen
• [PATCH v5 2/3] mfd: devicetree: add bindings for Atmel Flexcom   Cyrille Pitchen
• [PATCH v5 3/3] mfd: atmel-flexcom: add a driver for Atmel Flexible Serial Communication Unit   Cyrille Pitchen
• [PATCH v4 1/2] mfd: devicetree: add bindings for Atmel Flexcom   Cyrille Pitchen
• [PATCH v6 0/2] mfd: flexcom: add a driver for Flexcom   Cyrille Pitchen
• [PATCH v6 1/2] mfd: devicetree: add bindings for Atmel Flexcom   Cyrille Pitchen
• [PATCH v6 2/2] mfd: atmel-flexcom: add a driver for Atmel Flexible Serial Communication Unit   Cyrille Pitchen
• [PATCH v2 0/5] add driver for Atmel QSPI controller   Cyrille Pitchen
• [PATCH v2 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change   Cyrille Pitchen
• [PATCH v2 2/5] Documentation: mtd: add a DT property to set the number of dummy cycles   Cyrille Pitchen
• [PATCH v2 3/5] mtd: spi-nor: allow to tune the number of dummy cycles   Cyrille Pitchen
• [PATCH v2 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver   Cyrille Pitchen
• [PATCH v2 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller   Cyrille Pitchen
• [PATCH v2 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change   Cyrille Pitchen
• [PATCH v2 2/5] Documentation: mtd: add a DT property to set the number of dummy cycles   Cyrille Pitchen
• [PATCH v6 2/2] mfd: atmel-flexcom: add a driver for Atmel Flexible Serial Communication Unit   Cyrille Pitchen
• [PATCH v7 0/2] mfd: flexcom: add a driver for Flexcom   Cyrille Pitchen
• [PATCH v7 1/2] mfd: devicetree: add bindings for Atmel Flexcom   Cyrille Pitchen
• [PATCH v7 2/2] mfd: atmel-flexcom: add a driver for Atmel Flexible Serial Communication Unit   Cyrille Pitchen
• [PATCH v8 0/2] mfd: flexcom: add a driver for Flexcom   Cyrille Pitchen
• [PATCH v8 1/2] mfd: devicetree: add bindings for Atmel Flexcom   Cyrille Pitchen
• [PATCH v8 2/2] mfd: atmel-flexcom: add a driver for Atmel Flexible Serial Communication Unit   Cyrille Pitchen
• [PATCH v2 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller   Cyrille Pitchen
• [PATCH v3 0/5] add driver for Atmel QSPI controller   Cyrille Pitchen
• [PATCH v3 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change   Cyrille Pitchen
• [PATCH v3 2/5] Documentation: mtd: add a DT property to set the number of dummy cycles   Cyrille Pitchen
• [PATCH v3 3/5] mtd: spi-nor: allow to tune the number of dummy cycles   Cyrille Pitchen
• [PATCH v3 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver   Cyrille Pitchen
• [PATCH v3 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller   Cyrille Pitchen
• [PATCH linux-next 1/1] tty/serial: at91: fix I/O accesses on RHR and THR for AVR32   Cyrille Pitchen
• [PATCH 3/5] ARM: MCPM: make internal helpers private to the core code   Nicolas Pitre
• [PATCH] ARM: appropriate __init annotation for const data   Nicolas Pitre
• [PATCH] drivers/reset: appropriate __init annotation for const data   Nicolas Pitre
• [PATCH] ARM: asm/unified.h: guard the IT macros against redefinition when using LTO   Nicolas Pitre
• [PATCH] ARM: appropriate __init annotation for const data   Nicolas Pitre
• [PATCH 3/5] ARM: MCPM: make internal helpers private to the core code   Nicolas Pitre
• [PATCH v2] ARM: appropriate __init annotation for const data   Nicolas Pitre
• [PATCH v2] ARM: appropriate __init annotation for const data   Nicolas Pitre
• [PATCH v3] ARM: appropriate __init annotation for const data   Nicolas Pitre
• [PATCH] drivers/clk: appropriate __init annotation for const data   Nicolas Pitre
• [PATCH] irqchip: gic: Add a cpu map for each GIC instance   Nicolas Pitre
• [PATCH] irqchip: gic: Add a cpu map for each GIC instance   Nicolas Pitre
• [PATCH] ARM: VDSO: fix regression with toolchains lacking ld.bfd executable   Raphaël Poggi
• [PATCH] ARM: VDSO: fix regression with toolchains lacking ld.bfd executable   Raphaël Poggi
• [PATCH] arm64: Juno: Add support for coresight   Mathieu Poirier
• [PATCH] coresight: replicator: Use module_platform_driver   Mathieu Poirier
• [PATCH v2] coresight: replicator: Use module_platform_driver   Mathieu Poirier
• [PATCH v3] coresight: replicator: Use builtin_platform_driver()   Mathieu Poirier
• [PATCH v2] coresight: replicator: Use module_platform_driver   Mathieu Poirier
• Build regressions/improvements in v4.2-rc2   Mathieu Poirier
• [PATCH 0/5] coresight: Support context-ID tracing when PID namespace is enabled   Mathieu Poirier
• [PATCH v2] coresight: replicator: Use module_platform_driver   Mathieu Poirier
• [PATCH] Doc: trace: Fix typo in coresight.txt   Mathieu Poirier
• [PATCH] coresight: Fix implicit inclusion of linux/sched.h   Mathieu Poirier
• [PATCH 00/10] coresight: next v4.2-rc4   Mathieu Poirier
• [PATCH 01/10] coresight: binding for ETMv4 coresight drivers   Mathieu Poirier
• [PATCH 02/10] coresight-etm3x: Add Qualcomm PTM v1.1 peripheral ID   Mathieu Poirier
• [PATCH 03/10] coresight: replicator: Use builtin_platform_driver()   Mathieu Poirier
• [PATCH 04/10] coresight-etm3x: Change the name of the ctxid_val to ctxid_pid   Mathieu Poirier
• [PATCH 05/10] coresight-etm4x: Change the name of the ctxid_val to ctxid_pid   Mathieu Poirier
• [PATCH 06/10] Coresight: Add an interface for supporting ETM3/4 Context ID tracing   Mathieu Poirier
• [PATCH 07/10] coresight-etm3x: Support context-ID tracing when PID namespace is enabled   Mathieu Poirier
• [PATCH 08/10] coresight-etm4x: Support context-ID tracing when PID namespace is enabled   Mathieu Poirier
• [PATCH 09/10] Doc: trace: Fix typo in coresight.txt   Mathieu Poirier
• [PATCH 10/10] coresight: Fix implicit inclusion of linux/sched.h   Mathieu Poirier
• [PATCH] arm:irqchip: IRQCHIP_DECLARE macro is now accessible   Joel Porquet
• [PATCH v3 2/2] doc: dt: add documentation for nxp,lpc1788-rtc   Matt Porter
• [PATCH-v5 1/5] Documentation: binding: add new property 'disable_after_xfer' to i2c-pxa   Matt Porter
• [PATCH-v5 4/5] Documentation: binding: add sclk adjustment properties to i2c-pxa   Matt Porter
• [PATCH 1/2] ARM: dts: Add support for phyCORE-AM335x SoM   Matt Porter
• [PATCH 1/2] ARM: dts: Add support for phyCORE-AM335x SoM   Matt Porter
• [PATCH v2 6/6] arm64: kernel: Add support for Privileged Access Never   Suzuki K. Poulose
• [PATCH] arm64: sys_reg() : Fix encoding of system registers   Suzuki K. Poulose
• [PATCH] arm64: sys_reg() : Fix encoding of system registers   Suzuki K. Poulose
• [PATCH] arm64: Generalise msr_s/mrs_s operations   Suzuki K. Poulose
• [RFC PATCH 00/10] arm64: Expose CPU feature registers   Suzuki K. Poulose
• [RFC PATCH 01/10] arm64: feature registers: Documentation   Suzuki K. Poulose
• [RFC PATCH 02/10] arm64: Make the CPU information more clear   Suzuki K. Poulose
• [RFC PATCH 03/10] arm64: Delay ELF HWCAP initialisation until all CPUs are up   Suzuki K. Poulose
• [RFC PATCH 04/10] arm64: Consolidate cpuinfo handling   Suzuki K. Poulose
• [RFC PATCH 05/10] arm64: Keep track of CPU feature registers   Suzuki K. Poulose
• [RFC PATCH 06/10] arm64: Add helper to decode register from instruction   Suzuki K. Poulose
• [RFC PATCH 07/10] arm64: Expose feature registers by emulating MRS   Suzuki K. Poulose
• [RFC PATCH 08/10] arm64: Emulate ID registers   Suzuki K. Poulose
• [RFC PATCH 09/10] arm64: Read system wide CPUID value   Suzuki K. Poulose
• [RFC PATCH 10/10] arm64: Use system-wide safe value of CPU feature register   Suzuki K. Poulose
• sample: arm64 cpu feature: Test program   Suzuki K. Poulose
• [PATCH v6 4/6] ARM: vf610: enable NAND Flash Controller   Bill Pringlemeir
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Andre Przywara
• [PATCH 2/7] KVM: kvm_host: add kvm_extended_msi   Andre Przywara
• [PATCH 7/7] KVM: arm: implement kvm_set_msi by gsi direct mapping   Andre Przywara
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Andre Przywara
• [PATCH v5 00/10] kvmtool: arm64: GICv3 guest support   Andre Przywara
• [PATCH v5 01/10] AArch64: Reserve two 64k pages for GIC CPU interface   Andre Przywara
• [PATCH v5 02/10] AArch{32, 64}: use KVM_CREATE_DEVICE & co to instanciate the GIC   Andre Przywara
• [PATCH v5 03/10] irq: add irq__get_nr_allocated_lines   Andre Przywara
• [PATCH v5 04/10] AArch{32, 64}: dynamically configure the number of GIC interrupts   Andre Przywara
• [PATCH v5 05/10] arm: finish VGIC initialisation explicitly   Andre Przywara
• [PATCH v5 06/10] arm: simplify MMIO dispatching   Andre Przywara
• [PATCH v5 07/10] limit number of VCPUs on demand   Andre Przywara
• [PATCH v5 08/10] arm: prepare for instantiating different IRQ chip devices   Andre Przywara
• [PATCH v5 09/10] arm: add support for supplying GICv3 redistributor addresses   Andre Przywara
• [PATCH v5 10/10] arm: use new irqchip parameter to create different vGIC types   Andre Przywara
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Andre Przywara
• [PATCH 11/13] KVM: arm64: implement ITS command queue command handlers   Andre Przywara
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Andre Przywara
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Andre Przywara
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Andre Przywara
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Andre Przywara
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Andre Przywara
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Andre Przywara
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Andre Przywara
• [PATCH 12/13] KVM: arm64: implement MSI injection in ITS emulation   Andre Przywara
• [PATCH 1/7] KVM: api: add kvm_irq_routing_extended_msi   Andre Przywara
• [PATCH v2 0/7] KVM: arm/arm64: gsi routing support   Andre Przywara
• [PATCH v2 00/15] KVM: arm64: GICv3 ITS emulation   Andre Przywara
• [PATCH v2 01/15] KVM: arm/arm64: VGIC: don't track used LRs in the distributor   Andre Przywara
• [PATCH v2 02/15] KVM: extend struct kvm_msi to hold a 32-bit device ID   Andre Przywara
• [PATCH v2 03/15] KVM: arm/arm64: add emulation model specific destroy function   Andre Przywara
• [PATCH v2 04/15] KVM: arm/arm64: extend arch CAP checks to allow per-VM capabilities   Andre Przywara
• [PATCH v2 05/15] KVM: arm/arm64: make GIC frame address initialization model specific   Andre Przywara
• [PATCH v2 06/15] KVM: arm64: Introduce new MMIO region for the ITS base address   Andre Przywara
• [PATCH v2 07/15] KVM: arm64: handle ITS related GICv3 redistributor registers   Andre Przywara
• [PATCH v2 08/15] KVM: arm64: introduce ITS emulation file with stub functions   Andre Przywara
• [PATCH v2 09/15] KVM: arm64: implement basic ITS register handlers   Andre Przywara
• [PATCH v2 10/15] KVM: arm64: add data structures to model ITS interrupt translation   Andre Przywara
• [PATCH v2 11/15] KVM: arm64: handle pending bit for LPIs in ITS emulation   Andre Przywara
• [PATCH v2 12/15] KVM: arm64: sync LPI configuration and pending tables   Andre Przywara
• [PATCH v2 13/15] KVM: arm64: implement ITS command queue command handlers   Andre Przywara
• [PATCH v2 14/15] KVM: arm64: implement MSI injection in ITS emulation   Andre Przywara
• [PATCH v2 15/15] KVM: arm64: enable ITS emulation as a virtual MSI controller   Andre Przywara
• [PATCH v2 1/7] KVM: api: introduce KVM_IRQ_ROUTING_EXTENDED_MSI   Andre Przywara
• [PATCH v2 3/7] KVM: irqchip: convey devid to kvm_set_msi   Andre Przywara
• [PATCH v2 4/7] KVM: arm/arm64: enable irqchip routing   Andre Przywara
• [PATCH v2 6/7] KVM: arm/arm64: enable MSI routing   Andre Przywara
• [PATCH v2 7/7] KVM: arm: implement kvm_set_msi by gsi direct mapping   Andre Przywara
• Extensions for KVM MSI related ioctls   Andre Przywara
• Extensions for KVM MSI related ioctls   Andre Przywara
• [PATCH v2 15/15] KVM: arm64: enable ITS emulation as a virtual MSI controller   Andre Przywara
• [PATCH 00/14] kvmtool: add ITS emulation and GSI routing for ARM   Andre Przywara
• [PATCH 01/14] irq: move IRQ routing into irq.c   Andre Przywara
• [PATCH 02/14] MSI-X: update GSI routing after changed MSI-X configuration   Andre Przywara
• [PATCH 03/14] virtio: fix endianness check for vhost support   Andre Przywara
• [PATCH 04/14] FDT: introduce global phandle allocation   Andre Przywara
• [PATCH 05/14] arm: use new phandle allocation functions   Andre Przywara
• [PATCH 06/14] TEMPORARY: arm: update public headers for GICv3 ITS emulation   Andre Przywara
• [PATCH 07/14] arm: allow creation of an MSI register frame region   Andre Przywara
• [PATCH 08/14] arm: FDT: create MSI controller DT node   Andre Przywara
• [PATCH 09/14] add kvm__check_vm_capability   Andre Przywara
• [PATCH 10/14] PCI: inject PCI device ID on MSI injection   Andre Przywara
• [PATCH 11/14] arm64: enable GICv3-ITS emulation   Andre Przywara
• [PATCH 12/14] arm: setup SPI IRQ routing tables   Andre Przywara
• [PATCH 13/14] TEMPORARY: update public headers for kvm_irq_routing_msi extension   Andre Przywara
• [PATCH 14/14] extend GSI IRQ routing to take a device ID   Andre Przywara
• [linux-sunxi] [PATCH 6/8] ARM: dts: axp209: Add usb_power_supply child node to the ax209 node   Bruno Prémont
• [linux-sunxi] [PATCH 6/8] ARM: dts: axp209: Add usb_power_supply child node to the ax209 node   Bruno Prémont
• [PATCH v2 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller   Roger Quadros
• [PATCH] ARM: edma: Clear IRQ if we get interrupted by a unknown event   Roger Quadros
• [PATCH] ARM: edma: Clear IRQ if we get interrupted by a unknown event   Roger Quadros
• [PATCH v3] ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc   Roger Quadros
• [PATCH v3 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Roger Quadros
• [PATCH v3] ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc   Roger Quadros
• [PATCH v3 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Roger Quadros
• [PATCH v3] ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc   Roger Quadros
• [PATCH V4 0/7] i2c: qup: Add support for v2 tags and bam dma   Sricharan R
• [PATCH V4 1/7] i2c: qup: Change qup_wait_writeready function to use for all timeouts   Sricharan R
• [PATCH V4 2/7] qup: i2c: factor out common code for reuse   Sricharan R
• [PATCH V4 3/7] i2c: qup: Add V2 tags support   Sricharan R
• [PATCH V4 4/7] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit   Sricharan R
• [PATCH V4 5/7] i2c: qup: Add bam dma capabilities   Sricharan R
• [PATCH V4 6/7] dts: msm8974: Add blsp2_bam dma node   Sricharan R
• [PATCH V4 7/7] dts: msm8974: Add dma channels for blsp2_i2c1 node   Sricharan R
• [RFC PATCH 0/4] iommu/arm-smmu: Add support for adding masters/clocks using generic bindings   Sricharan R
• [RFC PATCH 1/4] iommu/arm-smmu: Init driver using IOMMU_OF_DECLARE   Sricharan R
• [RFC PATCH 2/4] iommu/arm-smmu: Add xlate callback for initializing master devices from dt   Sricharan R
• [RFC PATCH 3/4] iommu/arm-smmu: Add support for specifying clocks   Sricharan R
• [RFC PATCH 4/4] iommu/arm-smmu: Add support for specifying regulators   Sricharan R
• [PATCH v2 0/5] Add support for PWMSS on DRA7   Vignesh R
• [PATCH v2 1/5] ARM: OMAP2+: DRA7: clockdomain: change l4per2_7xx_clkdm to SW_WKUP   R, Vignesh
• [PATCH v2 2/5] ARM: OMAP2+: DRA7: Add hwmod entries for PWMSS   R, Vignesh
• [PATCH 0/2] pixcir_i2c_ts: Add optional wakeup irq support   Vignesh R
• [PATCH 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Vignesh R
• [PATCH 2/2] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_tsc   Vignesh R
• [PATCH 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Vignesh R
• [PATCH v2 0/2] pixcir_i2c_ts: Add optional wakeup irq support   Vignesh R
• [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Vignesh R
• [PATCH v2 2/2] ARM: dts: AM437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_tsc   Vignesh R
• [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Vignesh R
• [PATCH v3 0/2] pixcir_i2c_ts: Add optional wakeup irq support   Vignesh R
• [PATCH v3 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Vignesh R
• [PATCH v3 2/2] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_tsc   Vignesh R
• [PATCH v2 2/5] ARM: OMAP2+: DRA7: Add hwmod entries for PWMSS   R, Vignesh
• [PATCH v3 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Vignesh R
• [RFC PATCH 0/5] Add memory mapped read support for TI QSPI.   Vignesh R
• [RFC PATCH 1/5] spi: introduce flag for memory mapped read   Vignesh R
• [RFC PATCH 2/5] spi: spi-ti-qspi: Add memory mapped read support   Vignesh R
• [RFC PATCH 3/5] mtd: devices: m25p80: set flag to request memory mapped read   Vignesh R
• [RFC PATCH 4/5] ARM: dts: DRA7: Add memory map region entries for qspi   Vignesh R
• [RFC PATCH 5/5] ARM: dts: AM4372: Add memory map region entries for qspi   Vignesh R
• [PATCH v2 2/5] ARM: OMAP2+: DRA7: Add hwmod entries for PWMSS   Vignesh R
• [PATCH] arm64: remove dead-code depending on CONFIG_UP_LATE_INIT   Jonas Rabenstein
• [PATCH] arm64: remove redundant object file list   Jonas Rabenstein
• [PATCH v7] dma: Add Xilinx AXI Direct Memory Access Engine driver support   Appana Durga Kedareswara Rao
• [PATCH v5 2/2] dma: Add Xilinx AXI Central Direct Memory Access Engine driver support   Appana Durga Kedareswara Rao
• [PATCH] ARM: dts: rockchip: add rk3288 arm-pmu irq affinity   Sonny Rao
• [PATCH 01/10] i2c: add and export of_get_i2c_adapter_by_node() interface   Thierry Reding
• [PATCH 01/10] i2c: add and export of_get_i2c_adapter_by_node() interface   Thierry Reding
• [PATCH v9 1/4] drm/layerscape: Add Freescale DCU DRM driver   Thierry Reding
• [PATCH v9 2/4] drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel   Thierry Reding
• [PATCH v9 3/4] arm/dts/ls1021a: Add DCU dts node   Thierry Reding
• [PATCH v9 1/4] drm/layerscape: Add Freescale DCU DRM driver   Thierry Reding
• [PATCH 0/4] ARM: tegra: enable Nouveau for Jetson TK1 and Venice 2   Thierry Reding
• [RESEND PATCH v3] ARM: tegra124: pmu support   Thierry Reding
• [PATCH V3 18/19] ARM: tegra: add GPU power supply to Jetson TK1 DT   Thierry Reding
• [PATCH V3 14/19] Documentation: DT: bindings: Add power domain info for NVIDIA PMC   Thierry Reding
• [PATCH V3 02/19] memory: tegra: Add MC flush support   Thierry Reding
• [PATCH V3 03/19] memory: tegra: add flush operation for Tegra30 memory clients   Thierry Reding
• [PATCH V3 04/19] memory: tegra: add flush operation for Tegra114 memory clients   Thierry Reding
• [PATCH V3 05/19] memory: tegra: add flush operation for Tegra124 memory clients   Thierry Reding
• [PATCH V3 07/19] soc: tegra: pmc: Wait for powergate state to change   Thierry Reding
• [PATCH V3 08/19] soc: tegra: pmc: Clean-up PMC helper functions   Thierry Reding
• [PATCH V3 10/19] drm/tegra: dc: Prepare for generic PM domains   Thierry Reding
• [PATCH V3 11/19] PCI: tegra: Add support for generic PM domains   Thierry Reding
• [PATCH V3 15/19] soc: tegra: pmc: Add generic PM domain support   Thierry Reding
• [PATCH V3 02/19] memory: tegra: Add MC flush support   Thierry Reding
• [RFC PATCH 00/15] pwm: add support for atomic update   Thierry Reding
• [RFC PATCH 01/15] pwm: add the pwm_is_enabled() helper   Thierry Reding
• [RFC PATCH 02/15] pwm: fix pwm_get_period and pwm_get_duty_cycle prototypes   Thierry Reding
• [RFC PATCH 03/15] pwm: add pwm_get_polarity helper function   Thierry Reding
• [RFC PATCH 04/15] pwm: make use of pwm_get_xxx helpers where appropriate   Thierry Reding
• [RFC PATCH 05/15] pwm: introduce default period and polarity concepts   Thierry Reding
• [RFC PATCH 06/15] pwm: define a new pwm_state struct   Thierry Reding
• [RFC PATCH 07/15] pwm: move the enabled/disabled info to pwm_state struct   Thierry Reding
• [RFC PATCH 08/15] backlight: pwm_bl: remove useless call to pwm_set_period   Thierry Reding
• [RFC PATCH 05/15] pwm: introduce default period and polarity concepts   Thierry Reding
• [RFC PATCH 08/15] backlight: pwm_bl: remove useless call to pwm_set_period   Thierry Reding
• [RFC PATCH 11/15] pwm: add the core infrastructure to allow atomic update   Thierry Reding
• [RFC PATCH 10/15] pwm: add the PWM initial state retrieval infra   Thierry Reding
• [RFC PATCH 08/15] backlight: pwm_bl: remove useless call to pwm_set_period   Thierry Reding
• [PATCH V3 02/19] memory: tegra: Add MC flush support   Thierry Reding
• [PATCH v2 2/4] drm/tegra: Add VIC support   Thierry Reding
• [RFC PATCH 08/15] backlight: pwm_bl: remove useless call to pwm_set_period   Thierry Reding
• [RFC PATCH 11/15] pwm: add the core infrastructure to allow atomic update   Thierry Reding
• [RFC PATCH 06/15] pwm: define a new pwm_state struct   Thierry Reding
• [PATCH v2 2/4] drm/tegra: Add VIC support   Thierry Reding
• [PATCH V3 02/19] memory: tegra: Add MC flush support   Thierry Reding
• [PATCH 00/18] Clean up exposure of arch-internal code   Thierry Reding
• [PATCH 16/18] iommu: tegra-smmu: get_use   Thierry Reding
• [PATCH 17/18] iommu: tegra-smmu: more cleanups   Thierry Reding
• [PATCH 18/18] iommu: tegra-smmu: remove cacheflush.h   Thierry Reding
• [PATCH 00/18] Clean up exposure of arch-internal code   Thierry Reding
• [PATCH V3 10/19] drm/tegra: dc: Prepare for generic PM domains   Thierry Reding
• [PATCH 0/2] Drop two more omap3 legacy board files for v4.3 merge window   Sebastian Reichel
• [PATCH] [TWL4030 MADC] Fix ADC[3:6] readings   Sebastian Reichel
• [PATCH v2 1/2] power: reset: at91: add sama5d3 reset function   Sebastian Reichel
• [PATCH 0/3] Another Errata 430973 Update   Sebastian Reichel
• [PATCH 1/3] ARM: OMAP2+: N900: always enable IBE bit   Sebastian Reichel
• [PATCH 2/3] ARM: update errata 430973 documentation   Sebastian Reichel
• [PATCH 3/3] ARM: errata 430973: move !ARCH_MULTIPLATFORM to Kconfig   Sebastian Reichel
• [PATCH 3/3] ARM: errata 430973: move !ARCH_MULTIPLATFORM to Kconfig   Sebastian Reichel
• [PATCH v3 1/4] ARM: dts: Add binding documentation for AXP20x pmic usb power supply   Sebastian Reichel
• [PATCH v3 4/4] power: Add an axp20x-usb-power driver   Sebastian Reichel
• [PATCH 3/3] ARM: errata 430973: move !ARCH_MULTIPLATFORM to Kconfig   Sebastian Reichel
• [PATCH 3/3] ARM: errata 430973: move !ARCH_MULTIPLATFORM to Kconfig   Sebastian Reichel
• [PATCH] ARM: tegra: Fix nyan-big panel binding   Dylan Reid
• [PATCH 1/2] ARM: dts: Add support for phyCORE-AM335x SoM   Teresa Remmet
• [PATCH 2/2] ARM: dts: Add phyBOARD-WEGA-AM335x rdk   Teresa Remmet
• [PATCH 1/2] ARM: dts: Add support for phyCORE-AM335x SoM   Teresa Remmet
• [PATCH v4 0/7] add device tree support for mxc rtc   Philippe Reynes
• [PATCH v4 1/7] imx31: add a second rtc clock   Philippe Reynes
• [PATCH v4 2/7] imx35: define two clocks for rtc   Philippe Reynes
• [PATCH v4 3/7] rtc: mxc: use a second rtc clock   Philippe Reynes
• [PATCH v4 4/7] rtc: mxc: add support of device tree   Philippe Reynes
• [PATCH v4 5/7] dt-binding: document the binding for mxc rtc   Philippe Reynes
• [PATCH v4 6/7] imx27: dt: add support of internal rtc   Philippe Reynes
• [PATCH v4 7/7] apf27: dt: enable support of internal rtc   Philippe Reynes
• [PATCH v5 0/6] add device tree support for mxc rtc   Philippe Reynes
• [PATCH v5 1/6] imx31: add a second rtc clock   Philippe Reynes
• [PATCH v5 2/6] imx35: define two clocks for rtc   Philippe Reynes
• [PATCH v5 3/6] rtc: mxc: use a second rtc clock   Philippe Reynes
• [PATCH v5 4/6] dt-binding: document the binding for mxc rtc   Philippe Reynes
• [PATCH v5 5/6] rtc: mxc: add support of device tree   Philippe Reynes
• [PATCH v5 6/6] imx27: dt: add support of internal rtc   Philippe Reynes
• [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order   Mauro Ribeiro
• [PATCH] ARM: Mark ret_fast_syscall as a function   Drew Richardson
• [PATCH 3/4] irqchip, gicv3: Implement Cavium ThunderX erratum 23154   Robert Richter
• [PATCH 3/4] irqchip, gicv3: Implement Cavium ThunderX erratum 23154   Robert Richter
• [GIT PULL] Allwinner late changes for 4.2   Maxime Ripard
• [linux-sunxi] Re: [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic   Maxime Ripard
• [PATCH 0/2] dmaengine: Add scatter-gathered memset support   Maxime Ripard
• [PATCH 1/2] dmaengine: Add scatter-gathered memset   Maxime Ripard
• [PATCH 2/2] dmaengine: xdmac: Add scatter gathered memset support   Maxime Ripard
• [PATCH v3 2/4] mfd: axp20x: Add missing registers, and mark more registers volatile   Maxime Ripard
• [PATCH v3 3/4] mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs   Maxime Ripard
• [PATCH v3 4/4] power: Add an axp20x-usb-power driver   Maxime Ripard
• [PATCH v10 4/5] crypto: Add Allwinner Security System crypto accelerator   Maxime Ripard
• [linux-sunxi] Re: [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic   Maxime Ripard
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Maxime Ripard
• [GIT PULL] Allwinner late changes for 4.2   Maxime Ripard
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Maxime Ripard
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Maxime Ripard
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Maxime Ripard
• [PATCH 2/2] dmaengine: xdmac: Add scatter gathered memset support   Maxime Ripard
• [PATCH 3/6] clk: sunxi: Add A33 clock for compilation   Maxime Ripard
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Maxime Ripard
• [PATCH v2] mmc: sunxi: Don't start commands while the card is busy   Maxime Ripard
• [PATCH v11] crypto: Add Allwinner Security System crypto accelerator   Maxime Ripard
• [PATCH] watchdog: sunxi: fix activation of system reset   Maxime Ripard
• [PATCH v2 1/2] dmaengine: Add an enum for the dmaengine alignment constraints   Maxime Ripard
• [PATCH v2 2/2] dmaengine: hdmac: Add memset capabilities   Maxime Ripard
• [PATCH] ARM: dts: sun4i: Add Iteaduino Plus A10   Maxime Ripard
• [PATCH 0/4] pinctrl: sunxi: Implement proper irq DT parsing   Maxime Ripard
• [PATCH 1/4] pinctrl: sunxi: Use common functions to change irq_chip and handler   Maxime Ripard
• [PATCH 2/4] pinctrl: sunxi: Add irq_chip name   Maxime Ripard
• [PATCH 3/4] pinctrl: sunxi: Add custom irq_domain_ops   Maxime Ripard
• [PATCH 4/4] ARM: sunxi: dt: Convert users to the PIO interrupts binding   Maxime Ripard
• [PATCH 2/2] dmaengine: xdmac: Add scatter gathered memset support   Maxime Ripard
• [PATCH v2] ARM: dts: sun4i: Add Iteaduino Plus A10   Maxime Ripard
• [PATCH v11] crypto: Add Allwinner Security System crypto accelerator   Maxime Ripard
• [PATCH v2 1/7] clk: Add a basic factor clock   Maxime Ripard
• [linux-sunxi] Re: [PATCH v2] mmc: sunxi: Don't start commands while the card is busy   Maxime Ripard
• [PATCH v11] crypto: Add Allwinner Security System crypto accelerator   Maxime Ripard
• [PATCH] drivers/reset: appropriate __init annotation for const data   Maxime Ripard
• [PATCH v2 1/7] clk: Add a basic factor clock   Maxime Ripard
• [PATCH v2] watchdog: sunxi: fix activation of system reset   Maxime Ripard
• [PATCH v8] dma: sun4i: Add support for the DMA engine on sun[457]i SoCs   Maxime Ripard
• [PATCH 0/7] ARM: sunxi: Switch to clock indices   Maxime Ripard
• [PATCH 1/7] ARM: sun4i: Add clock indices   Maxime Ripard
• [PATCH 2/7] ARM: sun5i: Add clock indices   Maxime Ripard
• [PATCH 3/7] ARM: sun6i: Add clock indices   Maxime Ripard
• [PATCH 4/7] ARM: sun7i: Add clock indices   Maxime Ripard
• [PATCH 5/7] ARM: sun8i: Add clock indices   Maxime Ripard
• [PATCH 6/7] ARM: sun9i: Add clock indices   Maxime Ripard
• [PATCH 7/7] clk: sunxi: Add a simple gates driver   Maxime Ripard
• [PATCH v2 1/2] dmaengine: Add an enum for the dmaengine alignment constraints   Maxime Ripard
• [PATCH v7 5/5] clk: dt: Introduce binding for critical clock support   Maxime Ripard
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Maxime Ripard
• [PATCH 3/4] pinctrl: sunxi: Add custom irq_domain_ops   Maxime Ripard
• [PATCH v2 0/2] pinctrl: sunxi: Implement proper irq DT parsing   Maxime Ripard
• [PATCH v2 1/2] pinctrl: sunxi: Add custom irq_domain_ops   Maxime Ripard
• [PATCH v2 2/2] ARM: sunxi: dt: Convert users to the PIO interrupts binding   Maxime Ripard
• [PATCH v7 5/5] clk: dt: Introduce binding for critical clock support   Maxime Ripard
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Maxime Ripard
• [PATCH v2 2/2] ARM: sunxi: dt: Convert users to the PIO interrupts binding   Maxime Ripard
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   Maxime Ripard
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   Maxime Ripard
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   Maxime Ripard
• [PATCH v3 0/2] clk: improve handling of orphan clocks   Maxime Ripard
• [PATCH 6/7] ARM: sun9i: Add clock indices   Maxime Ripard
• [PATCH 7/7] clk: sunxi: Add a simple gates driver   Maxime Ripard
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Maxime Ripard
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Maxime Ripard
• [linux-sunxi] [PATCH 6/8] ARM: dts: axp209: Add usb_power_supply child node to the ax209 node   Maxime Ripard
• [PATCH 4/5] ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A33 tablet   Maxime Ripard
• [PATCH 1/5] ARM: dts: sun4i: Enable USB DRC on A10 OLinuxIno Lime   Maxime Ripard
• [PATCH 2/5] ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno Micro   Maxime Ripard
• [PATCH 3/5] ARM: dts: sun5i: Enable USB DRC on A13 OLinuxIno   Maxime Ripard
• [PATCH 5/5] ARM: dts: sun7i: Add dts file for Wits Pro A20 DKT   Maxime Ripard
• [linux-sunxi] Re: [PATCH 5/5] ARM: dts: sun7i: Add dts file for Wits Pro A20 DKT   Maxime Ripard
• [PATCH v2 1/3] ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno Micro   Maxime Ripard
• [PATCH v2 2/3] ARM: dts: sun5i: Enable USB DRC on A13 OLinuxIno   Maxime Ripard
• [PATCH v2 3/3] ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A33 tablet   Maxime Ripard
• [PATCH v2 1/2] ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADC   Maxime Ripard
• [PATCH v2 2/2] ARM: dts: sun5i: hsg-h702: Enable USB OTG controller   Maxime Ripard
• [PATCH v2 1/2] ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE   Maxime Ripard
• [PATCH v2 2/2] ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev   Maxime Ripard
• [PATCH v2 0/7] ARM: sunxi: Switch to clock indices   Maxime Ripard
• [PATCH v2 1/7] ARM: sun4i: Add clock indices   Maxime Ripard
• [PATCH v2 2/7] ARM: sun5i: Add clock indices   Maxime Ripard
• [PATCH v2 3/7] ARM: sun6i: Add clock indices   Maxime Ripard
• [PATCH v2 4/7] ARM: sun7i: Add clock indices   Maxime Ripard
• [PATCH v2 5/7] ARM: sun8i: Add clock indices   Maxime Ripard
• [PATCH v2 6/7] ARM: sun9i: Wrap the clock-indices   Maxime Ripard
• [PATCH v2 7/7] clk: sunxi: Add a simple gates driver   Maxime Ripard
• [PATCH v2 2/2] ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev   Maxime Ripard
• [PATCH] drm: atmel-hlcdc: fix vblank initial state   Sylvain Rochet
• [RESEND PATCH] pinctrl: at91: fix null pointer dereference   Sylvain Rochet
• [RESEND PATCH] pinctrl: at91: fix null pointer dereference   Sylvain Rochet
• RFC: default ioremap_*() variant defintions   Luis R. Rodriguez
• RFC: default ioremap_*() variant defintions   Luis R. Rodriguez
• RFC: default ioremap_*() variant defintions   Luis R. Rodriguez
• [PATCH v5 2/6] arch: unify ioremap prototypes and macro aliases   Luis R. Rodriguez
• [PATCH v5 2/6] arch: unify ioremap prototypes and macro aliases   Luis R. Rodriguez
• [PATCH v5 2/6] arch: unify ioremap prototypes and macro aliases   Luis R. Rodriguez
• [PATCH 09/10] arch: introduce memremap()   Luis R. Rodriguez
• [PATCH 09/10] arch: introduce memremap()   Luis R. Rodriguez
• [PATCH 09/10] arch: introduce memremap()   Luis R. Rodriguez
• [PATCH v2 04/25] mm: enhance region_is_ram() to distinguish 'unknown' vs 'mixed'   Luis R. Rodriguez
• [PATCH v2 08/25] arch: introduce memremap()   Luis R. Rodriguez
• [PATCH v2 08/25] arch: introduce memremap()   Luis R. Rodriguez
• [PATCH v2 08/25] arch: introduce memremap()   Luis R. Rodriguez
• [PATCH v2 08/25] arch: introduce memremap()   Luis R. Rodriguez
• [PATCH v2 08/25] arch: introduce memremap()   Luis R. Rodriguez
• [PATCH v3 01/24] mm: enhance region_is_ram() to region_intersects()   Luis R. Rodriguez
• [PATCH v3 01/24] mm: enhance region_is_ram() to region_intersects()   Luis R. Rodriguez
• [PATCH v3 01/24] mm: enhance region_is_ram() to region_intersects()   Luis R. Rodriguez
• [PATCH v3 05/24] arch: introduce memremap()   Luis R. Rodriguez
• [PATCH v3 01/24] mm: enhance region_is_ram() to region_intersects()   Luis R. Rodriguez
• [PATCH 1/2] watchdog: NXP LPC18XX Windowed Watchdog Timer Driver   Guenter Roeck
• [PATCH v2 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Guenter Roeck
• [PATCH v2 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Guenter Roeck
• [PATCH] watchdog: sunxi: fix activation of system reset   Guenter Roeck
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Guenter Roeck
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Guenter Roeck
• [PATCH v2 1/2] power: reset: at91: add sama5d3 reset function   Guenter Roeck
• [PATCH] sched, arm64: Fix the fallout of increasing the offset of 'thread_struct' within 'task_struct'   Guenter Roeck
• [PATCH] arm64: Minor refactoring of cpu_switch_to() to fix build breakage   Guenter Roeck
• [PATCH] arm64: switch_to: calculate cpu context pointer using separate register   Guenter Roeck
• [PATCH v3 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Guenter Roeck
• [PATCH 1/2] watchdog: add wdt suspend/resume support   Guenter Roeck
• [PATCH 2/2] watchdog: add wdt shutdown callback to disable wdt if enabled   Guenter Roeck
• [PATCH v2 1/2] watchdog: add wdt suspend/resume support   Guenter Roeck
• [PATCH v2 2/2] watchdog: add wdt shutdown callback to disable wdt if enabled   Guenter Roeck
• [PATCH v3 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Guenter Roeck
• [PATCH v2] thermal: consistently use int for temperatures   Guenter Roeck
• [PATCH v3 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Guenter Roeck
• [PATCH V4 2/6] mm: mlock: Add new mlock, munlock, and munlockall system calls   Guenter Roeck
• [PATCH v3 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver   Guenter Roeck
• [PATCH v2] thermal: consistently use int for temperatures   Guenter Roeck
• [PATCH 1/2] drivers: watchdog: at91sam9_wdt: add new feature support   Guenter Roeck
• [PATCH 1/2] drivers: watchdog: at91sam9_wdt: add new feature support   Guenter Roeck
• [PATCH 02/20] Documentation: watchdog: at91sam9_wdt: add clocks property   Guenter Roeck
• [PATCH 15/20] watchdog: at91sam9: get and use slow clock   Guenter Roeck
• [PATCH 0/2] iommu/arm-smmu: fixes for 4.2   Joerg Roedel
• [RFC v2 0/6] IRQ bypass manager and irqfd consumer   Joerg Roedel
• [RFC v2 0/6] IRQ bypass manager and irqfd consumer   Joerg Roedel
• [GIT PULL] iommu/arm-smmu: ARM SMMUv3 fixes for 4.2   Joerg Roedel
• [PATCH 0/2 v2] Fix MAX_PHANDLE_ARGS limitations   Joerg Roedel
• [PATCH 1/2] of: base: Allow more args than MAX_PHANDLE_ARGS if required   Joerg Roedel
• [PATCH 2/2] arm/smmu: Make use of of_parse_phandle_with_var_args   Joerg Roedel
• [PATCH 1/2] of: base: Allow more args than MAX_PHANDLE_ARGS if required   Joerg Roedel
• [PATCH v4 0/4] arm64: IOMMU-backed DMA mapping   Joerg Roedel
• [PATCH 00/18] Clean up exposure of arch-internal code   Joerg Roedel
• n900 in 4.2-rc0: repeating oopses   Pali Rohár
• [RESEND] [PATCH v2 1/2] arm: devtree: Set system_rev from DT revision   Pali Rohár
• [RESEND] [PATCH v2 1/2] arm: devtree: Set system_rev from DT revision   Pali Rohár
• USB Ethernet gadget on Nokia n900   Pali Rohár
• [RESEND] [PATCH v2 1/2] arm: devtree: Set system_rev from DT revision   Pali Rohár
• [RESEND] [PATCH v2 1/2] arm: devtree: Set system_rev from DT revision   Pali Rohár
• [PATCH 0/5] ATAGs to DT patches   Pali Rohár
• [PATCH 1/5] arm: devtree: Set system_rev from DT "/revision"   Pali Rohár
• [PATCH 2/5] arm: boot: convert ATAG_REVISION to DT "/revision" entry   Pali Rohár
• [PATCH 3/5] arm: atags: Fix declaration of function save_atags   Pali Rohár
• [PATCH 4/5] arm: devtree: Read ATAGs structure from DT "/chosen/linux, atags" entry   Pali Rohár
• [PATCH 5/5] arm: boot: store ATAGs structure into DT "/chosen/linux, atags" entry   Pali Rohár
• USB Ethernet gadget on Nokia n900   Pali Rohár
• [PATCH 5/5] arm: boot: store ATAGs structure into DT "/chosen/linux,atags" entry   Pali Rohár
• musb-hdrc: "Vbus off, timeout 1100 msec" message does not belong in sysfs   Pali Rohár
• n900 in 4.2-rc0: repeating oopses   Pali Rohár
• [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50   Nicolae Rosia
• [RFC 1/3] ftrace: adjust a function's pc to search for in check_stack() for arm64   Steven Rostedt
• [RFC 2/3] arm64: refactor save_stack_trace()   Steven Rostedt
• [RFC 2/3] arm64: refactor save_stack_trace()   Steven Rostedt
• [RFC 2/3] arm64: refactor save_stack_trace()   Steven Rostedt
• [RFC 2/3] arm64: refactor save_stack_trace()   Steven Rostedt
• [RFC 2/3] arm64: refactor save_stack_trace()   Steven Rostedt
• [RFC 2/3] arm64: refactor save_stack_trace()   Steven Rostedt
• [RFC 2/3] arm64: refactor save_stack_trace()   Steven Rostedt
• [RFC 2/3] arm64: refactor save_stack_trace()   Steven Rostedt
• [RFC 2/3] arm64: refactor save_stack_trace()   Steven Rostedt
• [RFC 2/3] arm64: refactor save_stack_trace()   Steven Rostedt
• [RFC 2/3] arm64: refactor save_stack_trace()   Steven Rostedt
• [RFC 2/3] arm64: refactor save_stack_trace()   Steven Rostedt
• [RFC 2/3] arm64: refactor save_stack_trace()   Steven Rostedt
• [RFC 2/3] arm64: refactor save_stack_trace()   Steven Rostedt
• [RFC 2/3] arm64: refactor save_stack_trace()   Steven Rostedt
• linux-next: manual merge of the renesas tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the renesas tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the tip tree with the arm-soc tree   Stephen Rothwell
• linux-next: build failure after merge of the tip tree   Stephen Rothwell
• linux-next: manual merge of the at91 tree with the arm-soc tree   Stephen Rothwell
• [PATCH] pinctrl: imx1-core: Fix debug output pin array index   Chris Ruehl
• [PATCH] pinctrl: imx1-core: Fix debug output pin array index   Chris Ruehl
• [PATCH] ARM: psci: keystone: remove keystone_smp_ops code if psci is supported   Mark Rutland
• [PATCH] keystone: dts: add psci command definition   Mark Rutland
• Oops at boot after commit 965278dcb8ab... when using split memory region   Mark Rutland
• Oops at boot after commit 965278dcb8ab... when using split memory region   Mark Rutland
• Oops at boot after commit 965278dcb8ab... when using split memory region   Mark Rutland
• [PATCH] ARM: psci: boot_secondary: replace __pa with virt_to_idmap   Mark Rutland
• [PATCH] ARM: psci: boot_secondary: replace __pa with virt_to_idmap   Mark Rutland
• [RFC] arm: psci: implement cpuidle_ops   Mark Rutland
• [PATCHv4 0/5] arm/arm64: Unify PSCI client support   Mark Rutland
• [PATCHv4 1/5] ARM: psci: boot_secondary: replace __pa with virt_to_idmap   Mark Rutland
• [PATCHv4 2/5] arm64: psci: factor invocation code to drivers   Mark Rutland
• [PATCHv4 3/5] drivers: psci: support native SMC{32,64} calls   Mark Rutland
• [PATCHv4 4/5] ARM: migrate to common PSCI client code   Mark Rutland
• [PATCHv4 5/5] MAINTAINERS: add PSCI entry   Mark Rutland
• Oops at boot after commit 965278dcb8ab... when using split memory region   Mark Rutland
• [PATCHv3 0/9] arm64: perf: heterogeneous PMU support   Mark Rutland
• [PATCHv3 1/9] arm: perf: factor arm_pmu core out to drivers   Mark Rutland
• [PATCHv3 2/9] arm64: perf: factor out callchain code   Mark Rutland
• [PATCHv3 3/9] arm64: perf: move to shared arm_pmu framework   Mark Rutland
• [PATCHv3 4/9] arm64: perf: condense event number maps   Mark Rutland
• [PATCHv3 5/9] arm64: perf: add Cortex-A53 support   Mark Rutland
• [PATCHv3 6/9] arm64: perf: add Cortex-A57 support   Mark Rutland
• [PATCHv3 7/9] arm64: dts: juno: describe PMUs separately   Mark Rutland
• [PATCHv3 8/9] MAINTAINERS: update ARM PMU profiling and debugging for arm64   Mark Rutland
• [PATCHv3 9/9] MAINTAINERS: add myself as arm perf reviewer   Mark Rutland
• Master-aware devices and sideband ID data   Mark Rutland
• [PATCH v3 3/3] dt-binding:Documents the mbigen bindings   Mark Rutland
• [PATCH 01/13] arm/arm64: Add new is_kernel_in_hyp_mode predicate   Mark Rutland
• [PATCH 03/13] arm64: Add ARM64_HAS_VIRT_HOST_EXTN feature   Mark Rutland
• [PATCH 01/13] arm/arm64: Add new is_kernel_in_hyp_mode predicate   Mark Rutland
• [PATCHv4 4/5] ARM: migrate to common PSCI client code   Mark Rutland
• [PATCH] arm: ls1021a: utilize hrtimer based broadcast mode   Mark Rutland
• [PATCH v2 02/10] arm64/debug: Mask off all reserved bits from generated ESR values   Mark Rutland
• [PATCH v2 04/10] arm64/debug: Eliminate magic number from ESR template definition   Mark Rutland
• [PATCH v2 06/10] arm64/debug: Move BRK ESR template macro into <asm/esr.h>   Mark Rutland
• [PATCH v2 05/10] arm64/debug: More consistent naming for the BRK ESR template macro   Mark Rutland
• [PATCH v2 08/10] arm64/debug: Add missing #include   Mark Rutland
• [PATCH v2 07/10] arm64/debug: Simplify BRK insn opcode declarations   Mark Rutland
• [PATCH v2 08/10] arm64/debug: Add missing #include   Mark Rutland
• [PATCH v2 01/10] arm64/debug: Eliminate magic number for size of BRK instruction   Mark Rutland
• [PATCH v2 09/10] arm64/BUG: Use BRK instruction for generic BUG traps   Mark Rutland
• [PATCH v2 09/10] arm64/BUG: Use BRK instruction for generic BUG traps   Mark Rutland
• [PATCH 4/4] arm64: dts: Add Broadcom North Star 2 support   Mark Rutland
• [PATCH v2 09/10] arm64/BUG: Use BRK instruction for generic BUG traps   Mark Rutland
• [PATCH v2 09/10] arm64/BUG: Use BRK instruction for generic BUG traps   Mark Rutland
• [PATCH v2 03/10] arm64: esr.h type fixes and cleanup   Mark Rutland
• [PATCH v2 4/4] arm64: dts: Add Broadcom North Star 2 support   Mark Rutland
• [PATCH] arm: dts: dra7: arch timer sits in always-on power domain   Mark Rutland
• [RESEND PATCH v3] ARM: tegra124: pmu support   Mark Rutland
• [RFC PATCH 2/2] Documentation: DTS: bindings: add ZynqMP RPU remoteproc   Mark Rutland
• [PATCH 0/5] arm64, pci: Add ECAM/PCIe support for Cavium ThunderX   Mark Rutland
• [PATCH 5/5] PCI: Add host drivers for Cavium ThunderX processors.   Mark Rutland
• Master-aware devices and sideband ID data   Mark Rutland
• [RFC 2/3] arm64: refactor save_stack_trace()   Mark Rutland
• [RFC 2/3] arm64: refactor save_stack_trace()   Mark Rutland
• [PATCH 3/5] arm64, pci: Allow RC drivers to supply pcibios_add_device() implementation.   Mark Rutland
• [PATCH 09/10] arch: introduce memremap()   Mark Rutland
• [PATCH 09/10] arch: introduce memremap()   Mark Rutland
• [PATCH v3 3/3] dt-binding:Documents the mbigen bindings   Mark Rutland
• "bus-cycles" perf event mapping   Mark Rutland
• [PATCH 1/2] arm64: dts: Add dts files for Marvell Berlin4CT SoC   Mark Rutland
• [PATCH 1/2] arm64: dts: Add dts files for Marvell Berlin4CT SoC   Mark Rutland
• [PATCH v4 1/8] Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol   Mark Rutland
• [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller   Mark Rutland
• [PATCH v4 1/8] Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol   Mark Rutland
• [PATCH 1/2] devicetree: bindings: rtc: add bindings for xilinx zynqmp rtc   Mark Rutland
• [PATCH 0/3] Generic PCI MSI + IOMMU topology bindings   Mark Rutland
• [PATCH 1/3] Docs: dt: add generic MSI bindings   Mark Rutland
• [PATCH 2/3] Docs: dt: Add PCI MSI map bindings   Mark Rutland
• [PATCH 3/3] Docs: dt: add PCI IOMMU map bindings   Mark Rutland
• kexec crash kernel boot failure on arm64   Mark Rutland
• [RFC] arm64:use set_fixmap_offset to make it more clear   Mark Rutland
• [RFC] arm64:use set_fixmap_offset to make it more clear   Mark Rutland
• [PATCH] arm64/efi: prefer AllocatePages() over efi_low_alloc() for vmlinux   Mark Rutland
• [PATCH] arm64/efi: prefer AllocatePages() over efi_low_alloc() for vmlinux   Mark Rutland
• [PATCH] dtb: Create a common home for cross-architecture dtsi files.   Mark Rutland
• [PATCH v2] arm64/efi: prefer AllocatePages() over efi_low_alloc() for vmlinux   Mark Rutland
• [PATCH 3/3] Docs: dt: add PCI IOMMU map bindings   Mark Rutland
• [PATCH 2/3] Docs: dt: Add PCI MSI map bindings   Mark Rutland
• [PATCH 1/3] Docs: dt: add generic MSI bindings   Mark Rutland
• [PATCH v2] dtb: Create a common home for cross-architecture dtsi files.   Mark Rutland
• [PATCH 2/5] Documentation: Detail permitted DT properties for the imx6ul_tsc   Mark Rutland
• [PATCH 4/5] ARM: dts: imx6ul.dtsi: add TSC support   Mark Rutland
• [PATCH] arm64: mm: mark create_mapping as __init   Mark Rutland
• [RFC PATCH 0/3] clocksource: exynos_mct: allow mct to use 64-bit counter from coprocessor   Mark Rutland
• [PATCH 0/2] arm64: support initrd outside of mapped RAM   Mark Rutland
• [PATCH 0/2] arm64: support initrd outside of mapped RAM   Mark Rutland
• [PATCH 0/2] arm64: support initrd outside of mapped RAM   Mark Rutland
• bug in identity map for 4KB pages?   Mark Rutland
• [PATCH] arm64/Documentation: clarify wording regarding memory below the Image   Mark Rutland
• bug in identity map for 4KB pages?   Mark Rutland
• bug in identity map for 4KB pages?   Mark Rutland
• bug in identity map for 4KB pages?   Mark Rutland
• bug in identity map for 4KB pages?   Mark Rutland
• [PATCH v2] dtb: Create a common home for cross-architecture dtsi files.   Mark Rutland
• [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller   Mark Rutland
• [PATCH v4 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller   Mark Rutland
• [PATCHv5 0/5] arm/arm64: Unify PSCI client support   Mark Rutland
• [PATCHv5 1/5] arm64: psci: factor invocation code to drivers   Mark Rutland
• [PATCHv5 2/5] drivers: psci: support native SMC{32,64} calls   Mark Rutland
• [PATCHv5 3/5] ARM: psci: boot_secondary: replace __pa with virt_to_idmap   Mark Rutland
• [PATCHv5 4/5] ARM: migrate to common PSCI client code   Mark Rutland
• [PATCHv5 5/5] MAINTAINERS: add PSCI entry   Mark Rutland
• [PATCH v3] dtb: Create a common home for cross-architecture dtsi files.   Mark Rutland
• [PATCH v2 5/5] arm64: add KASan support   Andrey Ryabinin
• [PATCH v2 5/5] arm64: add KASan support   Andrey Ryabinin
• [PATCH v2 5/5] arm64: add KASan support   Andrey Ryabinin
• [PATCH v2 5/5] arm64: add KASan support   Andrey Ryabinin
• [PATCH v2 5/5] arm64: add KASan support   Andrey Ryabinin
• [PATCH v3 0/5] KASAN for arm64   Andrey Ryabinin
• [PATCH v3 1/5] mm: kasan: introduce generic kasan_populate_zero_shadow()   Andrey Ryabinin
• [PATCH v3 2/5] arm64: introduce VA_START macro - the first kernel virtual address.   Andrey Ryabinin
• [PATCH v3 3/5] arm64: move PGD_SIZE definition to pgalloc.h   Andrey Ryabinin
• [PATCH v3 4/5] arm64: add KASAN support   Andrey Ryabinin
• [PATCH v3 5/5] ARM64: kasan: print memory assignment   Andrey Ryabinin
• [PATCH v3 1/5] mm: kasan: introduce generic kasan_populate_zero_shadow()   Andrey Ryabinin
• [PATCH v3 1/5] mm: kasan: introduce generic kasan_populate_zero_shadow()   Andrey Ryabinin
• [PATCH v2 5/5] arm64: add KASan support   Andrey Ryabinin
• [PATCH v4 0/7] KASAN for arm64   Andrey Ryabinin
• [PATCH v4 1/7] x86/kasan: generate KASAN_SHADOW_OFFSET in Makefile   Andrey Ryabinin
• [PATCH v4 2/7] mm: kasan: introduce generic kasan_populate_zero_shadow()   Andrey Ryabinin
• [PATCH v4 3/7] arm64: introduce VA_START macro - the first kernel virtual address.   Andrey Ryabinin
• [PATCH v4 4/7] arm64: move PGD_SIZE definition to pgalloc.h   Andrey Ryabinin
• [PATCH v4 5/7] arm64: add KASAN support   Andrey Ryabinin
• [PATCH v4 6/7] ARM64: kasan: print memory assignment   Andrey Ryabinin
• [PATCH v4 7/7] x86/kasan: switch to generic kasan_populate_zero_shadow()   Andrey Ryabinin
• [PATCH v4 0/7] KASAN for arm64   Andrey Ryabinin
• [PATCH v4 2/7] mm: kasan: introduce generic kasan_populate_zero_shadow()   Andrey Ryabinin
• [PATCH v4 1/7] x86/kasan: generate KASAN_SHADOW_OFFSET in Makefile   Andrey Ryabinin
• [PATCH v4 7/7] x86/kasan: switch to generic kasan_populate_zero_shadow()   Andrey Ryabinin
• [PATCH v4 5/7] arm64: add KASAN support   Andrey Ryabinin
• [PATCH] dmaengine: xgene-dma: Fix the resource map to handle overlapping   Rameshwar Sahu
• [PATCH] dmaengine: xgene-dma: Add ACPI support for X-Gene DMA engine driver   Rameshwar Sahu
• [PATCH] dmaengine: xgene-dma: Add ACPI support for X-Gene DMA engine driver   Rameshwar Sahu
• [PATCH v1 0/4] Crypto: tcrypt: Add test case for APM X-Gene SoC CRC32C algo   Rameshwar Sahu
• [PATCH v1 3/4] Crypto: Add support for APM X-Gene SoC CRC32C h/w accelerator driver   Rameshwar Sahu
• [PATCH] dmaengine: xgene-dma: Fix the resource map to handle overlapping   Rameshwar Prasad Sahu
• [PATCH] dmaengine: xgene-dma: Add ACPI support for X-Gene DMA engine driver   Rameshwar Prasad Sahu
• [PATCH v1 0/4] Crypto: tcrypt: Add test case for APM X-Gene SoC CRC32C algo   Rameshwar Prasad Sahu
• [PATCH v1 1/4] dmaengine: Add support for new feature CRC32C   Rameshwar Prasad Sahu
• [PATCH v1 2/4] dmaengine: xgene-dma: Add support for CRC32C calculation via DMA engine   Rameshwar Prasad Sahu
• [PATCH v1 3/4] Crypto: Add support for APM X-Gene SoC CRC32C h/w accelerator driver   Rameshwar Prasad Sahu
• [PATCH v1 4/4] Crypto: tcrypt: Add test case for APM X-Gene SoC CRC32C algo   Rameshwar Prasad Sahu
• [PATCH v1 0/4] dmaengine: Add supports for APM X-Gene SoC CRC32C accerlerator driver   Rameshwar Prasad Sahu
• [PATCH] ARM64 / SMP: Switch pr_err() to pr_debug() for disabled GICC entry   Mark Salter
• [PATCH] ARM64 / SMP: Switch pr_err() to pr_debug() for disabled GICC entry   Mark Salter
• [PATCH] ARM64: kernel: implement ACPI parking protocol   Mark Salter
• [PATCH] ARM64: kernel: implement ACPI parking protocol   Mark Salter
• [PATCH] arm64: remove dead code   Mark Salter
• [PATCH] ARM64: kernel: implement ACPI parking protocol   Mark Salter
• [PATCH 0/2] arm64: support initrd outside of mapped RAM   Mark Salter
• [PATCH 1/2] mm: add utility for early copy from unmapped ram   Mark Salter
• [PATCH 2/2] arm64: support initrd outside kernel linear map   Mark Salter
• [PATCH 0/2] arm64: support initrd outside of mapped RAM   Mark Salter
• [PATCH 1/2] ARM: dts: imx6sl-warp: Add changes for rev1.12   Otavio Salvador
• ARM64 kexec/kdump timeline   Azriel Samson
• [RFC 2/3] i2c: mux: demux-pinctrl: add driver   Wolfram Sang
• [RFC 3/3] ARM: shmobile: r8a7790: rework dts to use i2c demuxer   Wolfram Sang
• [RFC 1/3] of: make of_mutex public   Wolfram Sang
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Wolfram Sang
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Wolfram Sang
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Wolfram Sang
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Wolfram Sang
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Wolfram Sang
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Wolfram Sang
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Wolfram Sang
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Wolfram Sang
• [PATCH v2 5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery   Wolfram Sang
• [PATCH v2 5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery   Wolfram Sang
• [PATCH v3] i2c: omap: improve duty cycle on SCL   Wolfram Sang
• [PATCH 1/3] i2c: omap: switch to dev_get_drvdata()   Wolfram Sang
• [PATCH 2/3] i2c: omap: abolish variable name confusion   Wolfram Sang
• [PATCH] i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC   Wolfram Sang
• [PATCH-v3 02/11] i2c: pxa: No need to set slave addr for i2c master mode reset   Wolfram Sang
• [PATCH-v3 04/11] i2c: pxa: Remove compile warnning in 64bit mode   Wolfram Sang
• [PATCH-v3 06/11] i2c:pxa: Use devm_ variants in probe function   Wolfram Sang
• [PATCH-v3 07/11] i2c: pxa: enable/disable i2c module across msg xfer   Wolfram Sang
• [PATCH-v3 02/11] i2c: pxa: No need to set slave addr for i2c master mode reset   Wolfram Sang
• [PATCH-v3 02/11] i2c: pxa: No need to set slave addr for i2c master mode reset   Wolfram Sang
• [PATCH 1/3] i2c: omap: switch to dev_get_drvdata()   Wolfram Sang
• [PATCH] i2c: omap: fix bus recovery setup   Wolfram Sang
• [PATCH] i2c: omap: fix bus recovery setup   Wolfram Sang
• How to encode being an I2C slave in DT?   Wolfram Sang
• [PATCH] i2c: s3c2410: remove unused variable   Wolfram Sang
• [PATCH v2 1/4] i2c: tegra: implement slave mode   Wolfram Sang
• [PATCH v3 4/4] dt: paz00: define nvec as child of i2c bus   Wolfram Sang
• [PATCH v3 1/4] i2c: tegra: implement slave mode   Wolfram Sang
• [PATCH v3 1/4] i2c: tegra: implement slave mode   Wolfram Sang
• [PATCH] i2c: omap: fix bus recovery setup   Wolfram Sang
• [PATCH] i2c: core: only use set_scl for bus recovery after calling prepare_recovery   Wolfram Sang
• [PATCH] i2c: omap: fix bus recovery setup   Wolfram Sang
• [PATCH] i2c: mediatek: fix transfer error handling   Wolfram Sang
• [PATCH v2] i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC   Wolfram Sang
• [RFC 0/2] VFIO: Add virtual MSI doorbell support.   Pranavkumar Sawargaonkar
• [RFC 1/2] drivers: vfio: iommu map and unmap device specific memory from kernel.   Pranavkumar Sawargaonkar
• [RFC 2/2] drivers: vfio: pci: Add virtual MSI doorbell support.   Pranavkumar Sawargaonkar
• [PATCH 0/6] BPF JIT fixes and features for ARM   Nicolas Schichan
• [PATCH 1/6] ARM: net: fix condition for load_order > 0 when translating load instructions.   Nicolas Schichan
• [PATCH 2/6] ARM: net: handle negative offsets in BPF JIT.   Nicolas Schichan
• [PATCH 3/6] ARM: net: fix vlan access instructions in ARM JIT.   Nicolas Schichan
• [PATCH 4/6] ARM: net: add support for BPF_ANC | SKF_AD_PKTTYPE in ARM JIT.   Nicolas Schichan
• [PATCH 5/6] ARM: net: add support for BPF_ANC | SKF_AD_PAY_OFFSET in ARM JIT.   Nicolas Schichan
• [PATCH 6/6] ARM: net: add support for BPF_ANC | SKF_AD_HATYPE in ARM JIT.   Nicolas Schichan
• [PATCH V2 net 0/3] BPF JIT fixes for ARM   Nicolas Schichan
• [PATCH V2 net 1/3] ARM: net: fix condition for load_order > 0 when translating load instructions.   Nicolas Schichan
• [PATCH V2 net 2/3] ARM: net: handle negative offsets in BPF JIT.   Nicolas Schichan
• [PATCH V2 net 3/3] ARM: net: fix vlan access instructions in ARM JIT.   Nicolas Schichan
• [PATCH V2 net-next 0/3] ARM BPF JIT features   Nicolas Schichan
• [PATCH V2 next-next 1/3] ARM: net: add support for BPF_ANC | SKF_AD_PKTTYPE in ARM JIT.   Nicolas Schichan
• [PATCH V2 net-next 2/3] ARM: net: add support for BPF_ANC | SKF_AD_PAY_OFFSET in ARM JIT.   Nicolas Schichan
• [PATCH V2 net-next 3/3] ARM: net: add support for BPF_ANC | SKF_AD_HATYPE in ARM JIT.   Nicolas Schichan
• [PATCH V3 net-next 0/3] ARM BPF JIT features   Nicolas Schichan
• [PATCH V3 net-next 1/3] ARM: net: add support for BPF_ANC | SKF_AD_PKTTYPE in ARM JIT.   Nicolas Schichan
• [PATCH V3 net-next 2/3] ARM: net: add support for BPF_ANC | SKF_AD_PAY_OFFSET in ARM JIT.   Nicolas Schichan
• [PATCH V3 net-next 3/3] ARM: net: add support for BPF_ANC | SKF_AD_HATYPE in ARM JIT.   Nicolas Schichan
• [PATCH V3 06/19] clk: tegra: remove TEGRA_PLL_USE_LOCK for PLLD/PLLD2   Peter De Schrijver
• [PATCH V3 19/19] ARM: tegra: select PM_GENERIC_DOMAINS   Peter De Schrijver
• [PATCH V3 06/19] clk: tegra: remove TEGRA_PLL_USE_LOCK for PLLD/PLLD2   Peter De Schrijver
• [PATCH V3 19/19] ARM: tegra: select PM_GENERIC_DOMAINS   Peter De Schrijver
• [PATCH V3 02/19] memory: tegra: Add MC flush support   Peter De Schrijver
• [PATCH V3 02/19] memory: tegra: Add MC flush support   Peter De Schrijver
• [PATCH V3 02/19] memory: tegra: Add MC flush support   Peter De Schrijver
• weird behavior of get/set_fiq_regs()   Holger Schurig
• weird behavior of get/set_fiq_regs()   Holger Schurig
• imx6 fsl,fiq-stream-filter   Holger Schurig
• [PATCH 4.2-rc1 v21 3/6] irqchip: gic: Introduce plumbing for IPI FIQ   Holger Schurig
• [PATCH 0/1] Add support for esdhc0 on Vybrid.   Holger Schurig
• [PATCH v3 0/6] mmc: imx: a few fixes and new feature   Holger Schurig
• [GIT PULL] remoteproc for 4.2   Robert Schwebel
• [PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O   Andy Shevchenko
• [PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O   Andy Shevchenko
• [PATCH v4 4/5] tty/serial: at91: add support to FIFOs   Andy Shevchenko
• [PATCH v1 1/2] dt: atmel-usart: document new I/O data register width property   Andy Shevchenko
• [PATCH linux-next 1/1] tty/serial: at91: fix I/O accesses on RHR and THR for AVR32   Andy Shevchenko
• [PATCH 0/2] ARM: Couple of dts fixes for v4.2-rcx   Santosh Shilimkar
• [PATCH v2 1/2] ARM: dts: add buffalo linkstation ls-wxl/wsxl   Roger Shimizu
• [PATCH 0/2] ARM: DTS support for Linkstation LS-WTGL (orion5x)   Roger Shimizu
• [PATCH 1/2] ARM: dts: add buffalo linkstation ls-wtgl   Roger Shimizu
• [PATCH 2/2] ARM: defconfig: add DT support for orion5x_defconfig   Roger Shimizu
• [PATCH 0/2] ARM: DTS support for Linkstation LS-WTGL (orion5x)   Roger Shimizu
• [PATCH 2/2] ARM: defconfig: add DT support for orion5x_defconfig   Roger Shimizu
• [PATCH v2 0/2] ARM: orion5x: DTS support for Linkstation LS-WTGL   Roger Shimizu
• [PATCH v2 1/2] ARM: dts: orion5x: add buffalo linkstation ls-wtgl   Roger Shimizu
• [PATCH v2 2/2] ARM: defconfig: orion5x: add DT support   Roger Shimizu
• [PATCH v2 0/2] ARM: orion5x: DTS support for Linkstation LS-WTGL   Roger Shimizu
• [PATCH 4/5] staging: emxx_udc: add missing usb_ep_set_maxpacket_limit()   Sergei Shtylyov
• [PATCH v2 1/5] usb: gadget: ffs: call functionfs_unbind() if _ffs_func_bind() fails   Sergei Shtylyov
• [RFC Patch V1 02/12] MIPS, PCI: Use for_pci_msi_entry() to access MSI device list   Sergei Shtylyov
• [PATCH 3/3] arm64, mm: Use IPIs for TLB invalidation.   Sergei Shtylyov
• [PATCH 2/3] mfd: Add DT binding for Maxim MAX77802 IC   Sergei Shtylyov
• [PATCH v2 42/48] usb: gadget: epautoconf: use 'ep_match' gadget callback   Sergei Shtylyov
• [PATCH v2 47/48] usb: musb: gadget: add musb_match_ep() function   Sergei Shtylyov
• [PATCH v2 45/48] usb: gadget: net2280: add net2280_match_ep() function   Sergei Shtylyov
• [PATCH v2 48/48] usb: gadget: epautoconf: cleanup dead code   Sergei Shtylyov
• [PATCH v2 2/4] mfd: max77686: Use a generic name for the PMIC node in the example   Sergei Shtylyov
• [PATCH 6/7] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver   Sergei Shtylyov
• [PATCH v3 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173   Sergei Shtylyov
• [PATCH v2 15/25] memconsole: fix __iomem mishandling, switch to memremap   Sergei Shtylyov
• [PATCH v2] ARM: shmobile: r8a7794: add PFC DT support   Sergei Shtylyov
• [PATCH] ARM: shmobile: r8a7794: add PFC DT support   Sergei Shtylyov
• [PATCH 3/4] ARM: dts: rockchip: Add SPDIF transceiver for RK3188   Sergei Shtylyov
• [PATCH v3] ARM: shmobile: silk: initial device tree   Sergei Shtylyov
• [PATCH RESEND] ARM: shmobile: silk: add Ether DT support   Sergei Shtylyov
• [PATCH v2 0/2] Add R8A7794/SILK board eMMC DT support   Sergei Shtylyov
• [PATCH v2 1/2] ARM: shmobile: r8a7794: add MMCIF DT support   Sergei Shtylyov
• [PATCH v2 2/2] ARM: shmobile: silk: add eMMC DT support   Sergei Shtylyov
• [RESEND PATCH 2/6] soc: Mediatek: Add SCPSYS CPU power domain driver   Scott Shu
• [PATCH v2 0/6] This series adds SMP support for the MediaTek MT6580.   Scott Shu
• [PATCH v2 1/6] Document: bindings: DT: Add SMP enable method for MT6580 SoC platform   Scott Shu
• [PATCH v2 2/6] soc: Mediatek: Add SCPSYS CPU power domain driver   Scott Shu
• [PATCH v2 3/6] ARM: mediatek: add smp bringup code for MT6580   Scott Shu
• [PATCH v2 4/6] ARM: Mediatek: enable GPT6 on boot up to make arch timer working for MT6580   Scott Shu
• [PATCH v2 5/6] ARM: dts: mt6580: Add device nodes to the MT6580 dtsi file   Scott Shu
• [PATCH v2 6/6] ARM: dts: mt6580: enable basic SMP bringup for MT6580   Scott Shu
• [PATCH v2 2/6] soc: Mediatek: Add SCPSYS CPU power domain driver   Scott Shu
• [PATCH v2 2/6] soc: Mediatek: Add SCPSYS CPU power domain driver   Scott Shu
• [RESEND PATCH 2/6] soc: Mediatek: Add SCPSYS CPU power domain driver   Scott Shu
• [RESEND PATCH 0/6] This series adds SMP support for the MediaTek MT6580.   Scott Shu
• [RESEND PATCH 2/6] soc: Mediatek: Add SCPSYS CPU power domain driver   Scott Shu
• Linux on Armada 370   Constantine Shulyupin
• Linux on Armada 370   Constantine Shulyupin
• [PATCH V5 2/7] mm: mlock: Add new mlock system call   Kirill A. Shutemov
• [PATCH] crypto: arm: ignore generated SHA2 assembly files   Baruch Siach
• VDSO build failure: collect2: fatal error: cannot find 'ld'   Baruch Siach
• [PATCH 0/4] ARM: digicolor: misc updates for 4.3   Baruch Siach
• [PATCH 1/4] ARM: digicolor: enable watchdog device   Baruch Siach
• [PATCH 2/4] ARM: multi_v7_defconfig: enable Conexant Digicolor watchdog   Baruch Siach
• [PATCH 3/4] ARM: digicolor: dts: use stdout-path for console configuration   Baruch Siach
• [PATCH 4/4] MAINTAINERS: digicolor: add dts files   Baruch Siach
• VDSO build failure: collect2: fatal error: cannot find 'ld'   Baruch Siach
• [PATCH v3 1/7] ARM: imx: add i.mx6ul msl support   Baruch Siach
• [PATCH v2 2/2] pinctrl: driver for Conexant Digicolor CX92755 pin mapping   Baruch Siach
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Sebastian Andrzej Siewior
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Sebastian Andrzej Siewior
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Sebastian Andrzej Siewior
• [PATCH v6 4/6] ARM: vf610: enable NAND Flash Controller   Sebastian Andrzej Siewior
• musb-hdrc: "Vbus off, timeout 1100 msec" message does not belong in sysfs   Sebastian Andrzej Siewior
• [PATCH v2] iio: adc: xilinx-xadc: Push interrupts into threaded context   Sebastian Andrzej Siewior
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Sebastian Andrzej Siewior
• [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   Timo Sigurdsson
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   Timo Sigurdsson
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   Timo Sigurdsson
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   Timo Sigurdsson
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   Timo Sigurdsson
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   Timo Sigurdsson
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   Timo Sigurdsson
• [PATCH] arm64: defconfig: Add Ceva ahci to the defconfig   Michal Simek
• [PATCH] ARM: zynq: reserve space for jump target in secondary trampoline   Michal Simek
• [PATCH] PCI: xilinx: Add check for MSI interrupt flag before handling as INTx   Michal Simek
• [RFC 1/3] docs: dts: Added documentation for Xilinx Zynq PL Reset bindings.   Michal Simek
• [RFC 1/3] docs: dts: Added documentation for Xilinx Zynq PL Reset bindings.   Michal Simek
• [RFCv2 1/3] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.   Michal Simek
• [RFCv2 3/3] reset: reset-zynq: Adding support for Xilinx Zynq reset controller.   Michal Simek
• [RFCv2 2/3] dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.   Michal Simek
• [RFCv2 3/3] reset: reset-zynq: Adding support for Xilinx Zynq reset controller.   Michal Simek
• [PATCH] clk: zynq: remove redundant $(CONFIG_ARCH_ZYNQ) in Makefile   Michal Simek
• [PATCH] mmc: sdhci-of-arasan: Get quirks from device tree   Michal Simek
• [PATCH 1/7] ARM64: zynqmp: Use zynqmp specific compatible string for gpio   Michal Simek
• [PATCH 2/7] ARM64: zynqmp: Add CANs node for platform   Michal Simek
• [PATCH 3/7] ARM64: zynqmp: Add SMMU support   Michal Simek
• [PATCH 4/7] ARM64: zynqmp: Add DWC3 usb support   Michal Simek
• [PATCH 5/7] ARM64: zynqmp: Enable watchdog on ep108   Michal Simek
• [PATCH 6/7] ARM64: zynqmp: Enable sdhci on ep108   Michal Simek
• [PATCH 7/7] ARM64: zynqmp: Add eeprom memories on i2c bus   Michal Simek
• [PATCH] ARM64: zynqmp: Enable spi flashes on ep108   Michal Simek
• [RFCv2 1/3] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.   Michal Simek
• [RFCv2 2/3] dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.   Michal Simek
• [RFCv2 3/3] reset: reset-zynq: Adding support for Xilinx Zynq reset controller.   Michal Simek
• [PATCH] mmc: sdhci-of-arasan: Get quirks from device tree   Michal Simek
• [RFCv2 2/3] dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.   Michal Simek
• [RFCv2 1/3] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.   Michal Simek
• [PATCH 7/7] ARM64: zynqmp: Add eeprom memories on i2c bus   Michal Simek
• [PATCH v2] ARM64: zynqmp: Add eeprom memories on i2c bus   Michal Simek
• [RFCv2 1/3] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.   Michal Simek
• [RFCv3 4/4] ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER   Michal Simek
• [GIT PULL] Xilinx Zynq changes for v4.3   Michal Simek
• [GIT PULL] Xilinx ZynqMP DT changes for v4.3   Michal Simek
• [GIT PULL] Xilinx Zynq DT changes for v4.3   Michal Simek
• [RFC] ARM: EXYNOS: reset KFC cores when cpu is up   Sjoerd Simons
• [PATCH] clk: rockchip: Fix SPIF special clock definition   Sjoerd Simons
• [PATCH 0/4] Add SPDIF support for rockchip   Sjoerd Simons
• [PATCH 1/4] ASoC: dt-bindings: add rockchip tranceiver bindings   Sjoerd Simons
• [PATCH 2/4] ASoc: rockchip: Add rockchip SPDIF transceiver driver   Sjoerd Simons
• [PATCH 3/4] ARM: dts: rockchip: Add SPDIF transceiver for RK3188   Sjoerd Simons
• [PATCH 4/4] ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock   Sjoerd Simons
• [PATCH 2/4] ASoc: rockchip: Add rockchip SPDIF transceiver driver   Sjoerd Simons
• [PATCH 1/1] arm64: use pr_warn instead of pr_warning   Maninder Singh
• [RESEND][PATCH v2] arm64:Modify the dump mem for 64 bit addresses   Maninder Singh
• [PATCH v3] arm64: Modify the dump mem for 64 bit addresses   Maninder Singh
• [PATCH v4] arm64:Modify the dump mem for 64 bit addresses   Maninder Singh
• [PATCH v5] arm64:Modify the dump mem for 64 bit addresses   Maninder Singh
• [PATCH v3 0/2] arm/arm64: KVM: Optimize arm64 fp/simd, saves 30-50% on exits   Mario Smarduch
• [PATCH v3 1/2] arm64: KVM: Optimize arm64 skip 30-50% vfp/simd save/restore on exits   Mario Smarduch
• [PATCH v3 1/2] arm64: KVM: Optimize arm64 skip 30-50% vfp/simd save/restore on exits   Mario Smarduch
• [PATCH 1/3] arm: KVM: define headers and offsets to mange VFP state   Mario Smarduch
• [PATCH 2/3] arm: KVM: Implement lazy VFP switching outside of Hyp Mode   Mario Smarduch
• [PATCH 3/3] arm: KVM: Add VFP lazy switch hooks in Host KVM   Mario Smarduch
• [PATCH 0/3] arm: KVM: VFP lazy switch in KVM Host Mode may save upto 98%   Mario Smarduch
• [PATCH 09/13] arm64: KVM: VHE: Add alternatives for VHE-enabled world-switch   Mario Smarduch
• [PATCH 09/13] arm64: KVM: VHE: Add alternatives for VHE-enabled world-switch   Mario Smarduch
• [PATCH v4 0/2] arm/arm64: KVM: Optimize arm64 fp/simd, saves 30-50% on exits for non-VHE   Mario Smarduch
• [PATCH v4 1/2] arm64: KVM: Optimize arm64 non-VHE fpsimd skip 30-50% save/restore on exits   Mario Smarduch
• [PATCH v4 2/2] keep arm vfp/simd exit handling consistent with arm64   Mario Smarduch
• [PATCH v4 0/2] arm/arm64: KVM: Optimize arm64 fp/simd, saves 30-50% on exits for non-VHE   Mario Smarduch
• [PATCH v4 0/2] arm/arm64: KVM: Optimize arm64 fp/simd, saves 30-50% on exits for non-VHE   Mario Smarduch
• [PATCH v4 0/2] arm/arm64: KVM: Optimize arm64 fp/simd, saves 30-50% on exits   Mario Smarduch
• [PATCH v4 1/2] arm64: KVM: Optimize arm64 skip 30-50% vfp/simd save/restore on exits   Mario Smarduch
• [PATCH v4 2/2] arm: KVM: keep arm vfp/simd exit handling consistent with arm64   Mario Smarduch
• [GIT PULL] CSR atlas7 pinctrl descriptions for 4.2   Barry Song
• [GIT PULL] CSR SiRFSoC rtc iobrg move to regmap for 4.2   Barry Song
• [PATCH 1/3] ARM: dts: atlas7: set right memory range and hwspinlock for IPC stuff   Barry Song
• [PATCH 2/3] hwspinlock: sirf: fix the memory base and move to devm_ioremap   Barry Song
• [PATCH 3/3] hwspinlock: sirf: remove useless header files   Barry Song
• [GIT PULL] CSR atlas7 pinctrl descriptions for 4.2   Barry Song
• [PATCH 1/5] ARM: prima2_defconfig: fix the outdated defconfig   Barry Song
• [PATCH 2/5] ARM: prima2_defconfig: enable build for SiRFSoC SDHC host   Barry Song
• [PATCH 3/5] ARM: prima2_defconfig: enable build for misc input   Barry Song
• [PATCH 4/5] ARM: prima2_defconfig: enable build for RTC   Barry Song
• [PATCH 5/5] ARM: prima2_defconfig: enable build for hwspinlock   Barry Song
• [PATCH] dmaengine: sirf: fix kernel panic under one race condition   Barry Song
• [PATCH 1/2] serial: sirf: workaround rx process to avoid possible data loss   Barry Song
• [PATCH 2/2] serial: sirf: let uart's receive start in right place   Barry Song
• [PATCH] dmaengine: sirf: fix kernel panic under one race condition   Barry Song
• [PATCH] pinctrl: sirf: add power management support for atlas7   Barry Song
• [GIT PULL] CSR prima2_defconfig fixes for 4.2   Barry Song
• [PATCH 0/7] clk: atlas7: a bind of fixes   Barry Song
• [PATCH 1/7] clk: atlas7: add lost pwm unit clks   Barry Song
• [PATCH 2/7] clk: atlas7: export mux clks so that driver can use it   Barry Song
• [PATCH 3/7] clk: sirf: fix integer overflow in dto rate calculation   Barry Song
• [PATCH 4/7] clk: atlas7: replace dto resolution magic number by macro   Barry Song
• [PATCH 5/7] clk: atlas7: fix the clock tree for bluetooth stuff   Barry Song
• [PATCH 6/7] clk: sirf: fix bit field and its root clk for coresight_tpiu   Barry Song
• [PATCH 7/7] clk: atlas7: fix pll missed divide NR in fraction mode   Barry Song
• [PATCH 00/10] ARM: dts: atlas7: add some missed nodes and properties   Barry Song
• [PATCH 01/10] ARM: dts: atlas7: add lost jpeg node   Barry Song
• [PATCH 02/10] ARM: dts: atlas7: add performance monitor unit node   Barry Song
• [PATCH 03/10] ARM: dts: atlas7: add lost gmac node   Barry Song
• [PATCH 04/10] ARM: dts: atlas7: add alias name for spi device   Barry Song
• [PATCH 05/10] ARM: dts: atlas7: add multimedia codec node   Barry Song
• [PATCH 06/10] ARM: dts: atlas7: add lost G2D node   Barry Song
• [PATCH 07/10] ARM: dts: atlas7: add lost PWM node   Barry Song
• [PATCH 08/10] ARM: dts: atlas7: add software digital radio nodes and its DMA channels   Barry Song
• [PATCH 09/10] ARM: dts: atlas7: put pinctl property to get pinmux for NAND   Barry Song
• [PATCH 10/10] ARM: dts: atlas7: add a GPIO key for rearview button   Barry Song
• [PATCH 2/7] clk: atlas7: export mux clks so that driver can use it   Barry Song
• [PATCH 5/7] clk: atlas7: fix the clock tree for bluetooth stuff   Barry Song
• [PATCH v2] mmc: sunxi: Don't start commands while the card is busy   Arend van Spriel
• [PATCH V4 2/7] qup: i2c: factor out common code for reuse   Sricharan
• [PATCH V4 3/7] i2c: qup: Add V2 tags support   Sricharan
• [PATCH V4 4/7] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit   Sricharan
• [PATCH V4 5/7] i2c: qup: Add bam dma capabilities   Sricharan
• [RFC PATCH 1/4] iommu/arm-smmu: Init driver using IOMMU_OF_DECLARE   Sricharan
• [RFC PATCH 3/4] iommu/arm-smmu: Add support for specifying clocks   Sricharan
• [RFC PATCH 4/4] iommu/arm-smmu: Add support for specifying regulators   Sricharan
• [PATCH v2 01/20] xen: Add Xen specific page definition   Stefano Stabellini
• [PATCH v2 02/20] xen: Introduce a function to split a Linux page into Xen page   Stefano Stabellini
• [PATCH v2 03/20] xen/grant: Introduce helpers to split a page into grant   Stefano Stabellini
• [PATCH v2 04/20] xen/grant: Add helper gnttab_page_grant_foreign_access_ref   Stefano Stabellini
• [PATCH v2 06/20] block/xen-blkfront: Store a page rather a pfn in the grant structure   Stefano Stabellini
• [PATCH v2 09/20] xen/biomerge: Don't allow biovec to be merge when Linux is not using 4KB page   Stefano Stabellini
• [PATCH v2 10/20] xen/xenbus: Use Xen page definition   Stefano Stabellini
• [PATCH v2 11/20] tty/hvc: xen: Use xen page definition   Stefano Stabellini
• [PATCH v2 13/20] xen/events: fifo: Make it running on 64KB granularity   Stefano Stabellini
• [PATCH v2 14/20] xen/grant-table: Make it running on 64KB granularity   Stefano Stabellini
• [PATCH v2 19/20] xen/privcmd: Add support for Linux 64KB page granularity   Stefano Stabellini
• [PATCH v2 19/20] xen/privcmd: Add support for Linux 64KB page granularity   Stefano Stabellini
• [Xen-devel] [PATCH v2 13/20] xen/events: fifo: Make it running on 64KB granularity   Stefano Stabellini
• [Xen-devel] [PATCH v2 09/20] xen/biomerge: Don't allow biovec to be merge when Linux is not using 4KB page   Stefano Stabellini
• [Xen-devel] [PATCH v2 14/20] xen/grant-table: Make it running on 64KB granularity   Stefano Stabellini
• [PATCH v2 12/20] xen/balloon: Don't rely on the page granularity is the same for Xen and Linux   Stefano Stabellini
• [Xen-devel] [PATCH v2 09/20] xen/biomerge: Don't allow biovec to be merge when Linux is not using 4KB page   Stefano Stabellini
• [PATCH 1/8] arm/xen: Remove helpers which are PV specific   Stefano Stabellini
• [Xen-devel] [PATCH 2/8] xen: Make clear that swiotlb and biomerge are dealing with DMA address   Stefano Stabellini
• [PATCH 4/8] xen: Use the correctly the Xen memory terminologies   Stefano Stabellini
• [Patch v3 1/5] mtd: nand: tegra: add devicetree binding   Lucas Stach
• [Patch v3 2/5] mtd: nand: add NVIDIA Tegra NAND Flash controller driver   Lucas Stach
• [Patch v3 2/5] mtd: nand: add NVIDIA Tegra NAND Flash controller driver   Lucas Stach
• [Patch v3 2/5] mtd: nand: add NVIDIA Tegra NAND Flash controller driver   Lucas Stach
• [PATCH 9/9] gpiolib: Add gpio name information to /sys/kernel/debug/gpio   Lucas Stach
• [PATCH 0/6] BPF JIT fixes and features for ARM   Alexei Starovoitov
• [PATCH V2 net-next 0/3] ARM BPF JIT features   Alexei Starovoitov
• [PATCH v1 3/7] mtd: fsl-quadspi: Support both 24- and 32-bit addressed commands.   Alexander Stein
• [PATCH v10 1/5] drm/layerscape: Add Freescale DCU DRM driver   Alexander Stein
• [PATCH 3/3] arm: dts: ls1021a: Add snps, configure-gfladj property to USB3 node   Alexander Stein
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Alan Stern
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Alan Stern
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Alan Stern
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Alan Stern
• [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core   Alan Stern
• [PATCH] ARM64 / SMP: Switch pr_err() to pr_debug() for disabled GICC entry   Al Stone
• [PATCH v2 0/3] Correct for ACPI 5.1->6.0 spec changes in MADT GICC entries   Al Stone
• [PATCH v3 0/3] Correct for ACPI 5.1->6.0 spec changes in MADT GICC entries   Al Stone
• [PATCH v3 1/3] ACPI : introduce macros for using the ACPI specification version   Al Stone
• [PATCH v3 2/3] ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro   Al Stone
• [PATCH v3 3/3] ACPI / ARM64 : use the new BAD_MADT_GICC_ENTRY macro   Al Stone
• [PATCH v3 1/3] ACPI : introduce macros for using the ACPI specification version   Al Stone
• [PATCH v3 1/3] ACPI : introduce macros for using the ACPI specification version   Al Stone
• [PATCH v3 2/3] ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro   Al Stone
• [PATCH v3 2/3] ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro   Al Stone
• [PATCH v3 1/3] ACPI : introduce macros for using the ACPI specification version   Al Stone
• [PATCH v4 0/2] Correct for ACPI 5.1->6.0 spec changes in MADT GICC entries   Al Stone
• [PATCH v4 1/2] ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro   Al Stone
• [PATCH v4 2/2] ACPI / ARM64 : use the new BAD_MADT_GICC_ENTRY macro   Al Stone
• [PATCH v4 0/2] Correct for ACPI 5.1->6.0 spec changes in MADT GICC entries   Al Stone
• [PATCH v4 0/2] Correct for ACPI 5.1->6.0 spec changes in MADT GICC entries   Al Stone
• [PATCH v4 1/2] ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro   Al Stone
• [PATCH] ARM64: kernel: implement ACPI parking protocol   Al Stone
• [PATCH] ARM64: kernel: implement ACPI parking protocol   Al Stone
• [PATCH] ARM: psci: boot_secondary: replace __pa with virt_to_idmap   Grygorii Strashko
• [PATCH v2] PM / hibernate: fix kernel crash in alloc_highmem_pages   Grygorii Strashko
• [PATCH v2 5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery   Grygorii Strashko
• [PATCH] i2c: omap: fix bus recovery setup   Grygorii Strashko
• [PATCH] driver core: correct device's shutdown order   Grygorii Strashko
• [PATCH 0/4] omap: Fix broken pbias device creation   Grygorii Strashko
• [PATCH 01/17] mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc   Grygorii Strashko
• [PATCH v3 0/7] clk: rockchip: add support for the clock-tree of the rk3368   Heiko Stuebner
• [PATCH 1/7] clk: rockchip: add support for phase inverters   Heiko Stuebner
• [PATCH 2/7] clk: rockchip: fix issues in the mmc-phase clock   Heiko Stuebner
• [PATCH 3/7] clk: rockchip: define the inverters of rk3066/rk3188 and rk3288   Heiko Stuebner
• [PATCH 4/7] dt-bindings: add documentation of rk3668 clock controller   Heiko Stuebner
• [PATCH 5/7] clk: rockchip: add dt-binding header for rk3368   Heiko Stuebner
• [PATCH 6/7] clk: rockchip: add missing include guards   Heiko Stuebner
• [PATCH 7/7] clk: rockchip: add rk3368 clock controller   Heiko Stuebner
• [PATCH 0/4] ARM: dts: rockchip: add initial support for rk3288 Chrome-devices   Heiko Stuebner
• [PATCH 1/4] ARM: dts: Add sbs-battery dts fragment used by chromebooks   Heiko Stuebner
• [PATCH 2/4] ARM: dts: rockchip: add shared rk3288-veyron files   Heiko Stuebner
• [PATCH 3/4] ARM: dts: rockchip: add veyron-jerry board   Heiko Stuebner
• [PATCH 4/4] ARM: dts: rockchip: add Pinky board   Heiko Stuebner
• [PATCH] drm/rockchip: vop: remove hardware cursor window   Heiko Stübner
• [RFC PATCH 14/15] regulator: pwm: implement ->enable(), ->disable() and ->is_enabled methods   Heiko Stübner
• [RFC PATCH 14/15] regulator: pwm: implement ->enable(), ->disable() and ->is_enabled methods   Heiko Stübner
• [RFC PATCH 12/15] pwm: rockchip: add initial state retrieval   Heiko Stübner
• [RFC PATCH 13/15] pwm: rockchip: add support for atomic update   Heiko Stübner
• [RFC PATCH 16/15] pwm: add informations about polarity, duty cycle and period to debugfs   Heiko Stübner
• [RFC PATCH 00/15] pwm: add support for atomic update   Heiko Stübner
• [PATCH] arm64: dts: mt8173: add clock_null   Heiko Stübner
• [PATCH] pwm: add informations about polarity, duty cycle and period to debugfs   Heiko Stübner
• [PATCH] thermal: consistently use int for temperatures   Heiko Stübner
• [PATCH] clk: mediatek: Add MT8173 MMPLL change rate support   Heiko Stübner
• [PATCH] clk: mediatek: Add MT8173 MMPLL change rate support   Heiko Stübner
• [PATCH] clk: mediatek: Add MT8173 MMPLL change rate support   Heiko Stübner
• [PATCH v2 1/2] clk: mediatek: Fix PLL registers setting flow   Heiko Stübner
• [PATCH] soc/rockchip: add handler for usb-uart functionality   Heiko Stübner
• [PATCH] soc/rockchip: add handler for usb-uart functionality   Heiko Stübner
• [PATCH 1/2] dt-bindings: add vendor prefix for Netxeon Technology   Heiko Stübner
• [PATCH v1.1 1/4] ARM: dts: Add sbs-battery dts fragment used by chromebooks   Heiko Stübner
• [PATCH] ARM: dts: rockchip: add missing device_type = "memory" to boards   Heiko Stübner
• [PATCH] ARM: dts: rockchip: add rk3288 arm-pmu irq affinity   Heiko Stübner
• [PATCH] ARM: dts: rockchip: add missing device_type = "memory" to boards   Heiko Stübner
• [PATCH 0/4] ARM: dts: rockchip: add initial support for rk3288 Chrome-devices   Heiko Stübner
• [PATCH] ARM: dts: rockchip: add rk3288 arm-pmu irq affinity   Heiko Stübner
• [PATCH and GIT PULL 0/5] ARM: initial Rockchip stuff for 4.3   Heiko Stübner
• [PATCH 1/3] arm64: add Rockchip architecture entry   Heiko Stübner
• [PATCH 2/3] arm64: defconfig: enable ARCH_ROCKCHIP   Heiko Stübner
• [PATCH 3/3] arm64: dts: add Rockchip rk3368 core dtsi and board dts for the r88 board   Heiko Stübner
• [GIT PULL 1/2] Rockchip soc changes for 4.3, part1   Heiko Stübner
• [GIT PULL 2/2] Rockchip dts changes for 4.3, part1   Heiko Stübner
• [PATCH] clk: rockchip: Fix PLL bandwidth   Heiko Stübner
• [PATCH] clk: rockchip: Fix PLL bandwidth   Heiko Stübner
• [PATCH 1/2] ARM: dts: rockchip: Use correct dts properties for tsadc node   Heiko Stübner
• [PATCH 2/2] ARM: dts: rockchip: Add veyron-speedy board   Heiko Stübner
• [PATCH 1/2] ARM: rockchip: set correct stabilization thresholds in suspend   Heiko Stübner
• [PATCH 2/2] ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend   Heiko Stübner
• [PATCH v3 4/6] drm/rockchip: vop: Default enable win2/3 area0 bit   Heiko Stübner
• [PATCH v3 6/6] drm/rockchip: vop: support plane scale   Heiko Stübner
• [PATCH v3 3/6] drm/rockchip: vop: Add yuv plane support   Heiko Stübner
• [PATCH v3 0/6] drm/rockchip: fixes and new features   Heiko Stübner
• [PATCH v2 1/2] ARM: rockchip: set correct stabilization thresholds in suspend   Heiko Stübner
• [PATCH v2 2/2] ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend   Heiko Stübner
• [PATCH v2] ARM: dts: rockchip: Add veyron-speedy board   Heiko Stübner
• [PATCH v2 1/2] ARM: rockchip: set correct stabilization thresholds in suspend   Heiko Stübner
• [PATCH v4 2/7] clk: mediatek: Fix rate and dependency of MT8173 clocks   Heiko Stübner
• [PATCH v3 0/2] clk: improve handling of orphan clocks   Heiko Stübner
• [PATCH 00/18] Clean up exposure of arch-internal code   Heiko Stübner
• [PATCH] clk: rockchip: Fix SPIF special clock definition   Heiko Stübner
• [PATCH 3/4] ARM: dts: rockchip: Add SPDIF transceiver for RK3188   Heiko Stübner
• [PATCH 2/4] ASoc: rockchip: Add rockchip SPDIF transceiver driver   Heiko Stübner
• [PATCH v5 01/10] clk: mediatek: Removed unused dpi_ck clock from MT8173   Heiko Stübner
• [PATCH v5 01/10] clk: mediatek: Removed unused dpi_ck clock from MT8173   Heiko Stübner
• [PATCH v5 01/10] clk: mediatek: Removed unused dpi_ck clock from MT8173   Heiko Stübner
• [PATCH v2 2/2] mfd: ax20x: Add axp152 support   Michal Suchanek
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Michal Suchanek
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Michal Suchanek
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Michal Suchanek
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Michal Suchanek
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Michal Suchanek
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Michal Suchanek
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Michal Suchanek
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Michal Suchanek
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Michal Suchanek
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Michal Suchanek
• [PATCH 1/2] spi: s3c64xx: print fifo size on probe.   Michal Suchanek
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Michal Suchanek
• [PATCH v2] ARM: dts: Add SPI CS on exynos5250-snow   Michal Suchanek
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Michal Suchanek
• [PATCH v3] ARM: dts: Add SPI CS on exynos5250-snow   Michal Suchanek
• [PATCH 0/2] s3c64xx debug prints   Michal Suchanek
• [PATCH v2 2/2] spi: s3c64xx: add more debug prints.   Michal Suchanek
• [RFC PATCH 1/2] dt: mtd: ofpart: use compatible for partitions   Michal Suchanek
• [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data   Michal Suchanek
• [RFC PATCH 0/2] disambiguate s3c64xx controller-data and ofpart partition nodes   Michal Suchanek
• [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data   Michal Suchanek
• [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data   Michal Suchanek
• [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data   Michal Suchanek
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Michal Suchanek
• [linux-sunxi] [PATCH v2 1/3] ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno Micro   Michal Suchanek
• [RFCv2 PATCH 0/8] Introducing ACPI support for GICv2m   Suravee Suthikulpanit
• [RFCv2 PATCH 1/8] irqdomain: Introduce irq_domain_ops.init_alloc_info   Suravee Suthikulpanit
• [RFCv2 PATCH 2/8] gic: Introduce gic_init_irq_alloc_info()   Suravee Suthikulpanit
• [RFCv2 PATCH 3/8] gicv2m: Convert to use GIC irq_domain_ops.init_alloc_info   Suravee Suthikulpanit
• [RFCv2 PATCH 4/8] acpi: gsi: Adding acpi_init_irq_alloc_info() hook   Suravee Suthikulpanit
• [RFCv2 PATCH 5/8] arm64: Adding arch-specific acpi_init_irq_alloc_info   Suravee Suthikulpanit
• [RFCv2 PATCH 6/8] gic: acpi: Introduce GIC MSI frame handle and helper functions   Suravee Suthikulpanit
• [RFCv2 PATCH 7/8] gicv2m: Introducing gicv2m_acpi_init()   Suravee Suthikulpanit
• [RFCv2 PATCH 8/8] pci: acpi: Bind GICv2m MSI frame to PCI host bridge   Suravee Suthikulpanit
• [RFCv2 PATCH 0/8] Introducing ACPI support for GICv2m   Suravee Suthikulpanit
• [RFCv2 PATCH 1/8] irqdomain: Introduce irq_domain_ops.init_alloc_info   Suravee Suthikulpanit
• [PATCH 2/5] genirq: irqdomain: Remove irqdomain dependency on struct device_node   Suravee Suthikulpanit
• [PATCH] i2c: core: only use set_scl for bus recovery after calling prepare_recovery   Alexander Sverdlin
• [PATCH 1/3] i2c: omap: switch to dev_get_drvdata()   Alexander Sverdlin
• [PATCH 3/3] i2c: omap: on ->remove() call pm_runtime_put_sync()   Alexander Sverdlin
• [PATCH] i2c: core: only use set_scl for bus recovery after calling prepare_recovery   Alexander Sverdlin
• [PATCH] i2c: omap: fix bus recovery setup   Alexander Sverdlin
• [PATCH 1/3] ARM: ep93xx: add GPIO I2C to defconfig   Hartley Sweeten
• [PATCH 2/3] ARM: ep93xx: add DMA engine to the defconfig   Hartley Sweeten
• [PATCH 3/3] ARM: ep93xx: add framebuffer to the defconfig   Hartley Sweeten
• [PATCH] ARM: ep93xx: simone: enable DMA on the SPI host   Hartley Sweeten
• [PATCH] ARM/fb: ep93xx: switch framebuffer to use modedb only   Hartley Sweeten
• [PATCH] arm: dma-mapping: fix off-by-one error in bitmap size check   Marek Szyprowski
• [PATCH v2] arm: dma-mapping: fix off-by-one error in bitmap size check   Marek Szyprowski
• [PATCH 1/4] hvc_dcc: bind driver to core0 for reads and writes   Timur Tabi
• [PATCH 2/4] hvc_dcc: don't ignore errors during initialization   Timur Tabi
• [PATCH 4/4] hvc_dcc: disable user-space access to DCC   Timur Tabi
• [PATCH] pinctrl: add support for Qualcomm Technologies QDF2xxx ARM64 SoCs   Timur Tabi
• [PATCH] [v2] pinctrl: add support for Qualcomm Technologies QDF2xxx ARM64 SoCs   Timur Tabi
• [Linaro-acpi] [PATCH v3 0/8] Add self-probe infrastructure and stacked irqdomain support for ACPI based GICv2/3 init   Timur Tabi
• [PATCH v3 2/8] ACPI / irqchip: Add self-probe infrastructure to initialize IRQ controller   Timur Tabi
• [Linaro-acpi] [PATCH v3 0/8] Add self-probe infrastructure and stacked irqdomain support for ACPI based GICv2/3 init   Timur Tabi
• [PATCH v3 2/8] ACPI / irqchip: Add self-probe infrastructure to initialize IRQ controller   Timur Tabi
• Stack trace using ftrace   AKASHI Takahiro
• [PATCH v5 1/2] arm64: kvm: allows kvm cpu hotplug   AKASHI Takahiro
• Stack trace using ftrace   AKASHI Takahiro
• [RFC 0/3] arm64: ftrace: fix incorrect output from stack tracer   AKASHI Takahiro
• [RFC 1/3] ftrace: adjust a function's pc to search for in check_stack() for arm64   AKASHI Takahiro
• [RFC 2/3] arm64: refactor save_stack_trace()   AKASHI Takahiro
• [RFC 3/3] arm64: ftrace: mcount() should not create a stack frame   AKASHI Takahiro
• [RFC 2/3] arm64: refactor save_stack_trace()   AKASHI Takahiro
• [RFC 1/3] ftrace: adjust a function's pc to search for in check_stack() for arm64   AKASHI Takahiro
• [RFC 2/3] arm64: refactor save_stack_trace()   AKASHI Takahiro
• [RFC 2/3] arm64: refactor save_stack_trace()   AKASHI Takahiro
• [RFC 2/3] arm64: refactor save_stack_trace()   AKASHI Takahiro
• [RFC 2/3] arm64: refactor save_stack_trace()   AKASHI Takahiro
• [RFC 2/3] arm64: refactor save_stack_trace()   AKASHI Takahiro
• [RFC 2/3] arm64: refactor save_stack_trace()   AKASHI Takahiro
• [RFC 2/3] arm64: refactor save_stack_trace()   AKASHI Takahiro
• [RFC 2/3] arm64: refactor save_stack_trace()   AKASHI Takahiro
• [PATCH 0/6] Altera PCIe host controller driver with MSI support   Ley Foon Tan
• [PATCH 1/6] arm: add msi.h to Kbuild   Ley Foon Tan
• [PATCH 2/6] arm: mach-socfpga: enable pci support   Ley Foon Tan
• [PATCH 3/6] pci:host: Add Altera PCIe host controller driver   Ley Foon Tan
• [PATCH 4/6] pci: altera: Add Altera PCIe MSI driver   Ley Foon Tan
• [PATCH 5/6] Documentation: dt-bindings: pci: altera pcie device tree binding   Ley Foon Tan
• [PATCH 6/6] MAINTAINERS: Add Altera PCIe driver maintainer   Ley Foon Tan
• [PATCH 2/6] arm: mach-socfpga: enable pci support   Ley Foon Tan
• [PATCH 3/6] pci:host: Add Altera PCIe host controller driver   Ley Foon Tan
• [PATCH 4/6] pci: altera: Add Altera PCIe MSI driver   Ley Foon Tan
• [PATCH 4/6] pci: altera: Add Altera PCIe MSI driver   Ley Foon Tan
• [PATCH 4/6] pci: altera: Add Altera PCIe MSI driver   Ley Foon Tan
• [PATCH 3/6] pci:host: Add Altera PCIe host controller driver   Ley Foon Tan
• [PATCH 3/6] pci:host: Add Altera PCIe host controller driver   Ley Foon Tan
• [PATCH 3/6] pci:host: Add Altera PCIe host controller driver   Ley Foon Tan
• [PATCH 4/6] pci: altera: Add Altera PCIe MSI driver   Ley Foon Tan
• [PATCH v2 0/5] Altera PCIe host controller driver with MSI support   Ley Foon Tan
• [PATCH v2 1/5] arm: add msi.h to Kbuild   Ley Foon Tan
• [PATCH v2 2/5] pci:host: Add Altera PCIe host controller driver   Ley Foon Tan
• [PATCH v2 3/5] pci: altera: Add Altera PCIe MSI driver   Ley Foon Tan
• [PATCH v2 4/5] Documentation: dt-bindings: pci: altera pcie device tree binding   Ley Foon Tan
• [PATCH v2 5/5] MAINTAINERS: Add Altera PCIe and MSI drivers maintainer   Ley Foon Tan
• [PATCH v1 7/7] ARM: dts: ifc6410: add inforce LVDS panel support   Archit Taneja
• [PATCH 4/4] phy: berlin-usb: rename table copied from SATA PHY   Antoine Tenart
• [PATCH 1/4] phy: berlin-usb: fix divider for BG2CD   Antoine Tenart
• [PATCH 0/4] phy: berlin-usb: PLL divider fixes   Antoine Tenart
• [PATCH v2 0/4] mtd: pxa3xx_nand: rework the timing setup   Antoine Tenart
• [PATCH v2 1/4] mtd: pxa3xx_nand: add a default chunk size   Antoine Tenart
• [PATCH v2 2/4] mtd: pxa3xx_nand: add helpers to setup the timings   Antoine Tenart
• [PATCH v2 3/4] mtd: pxa3xx_nand: rework flash detection and timing setup   Antoine Tenart
• [PATCH v2 4/4] mtd: pxa3xx_nand: clean up the pxa3xx timings   Antoine Tenart
• [PATCH v2 0/7] ARM: berlin: nand support   Antoine Tenart
• [PATCH v2 1/7] mtd: pxa3xx_nand: add a non mandatory ECC clock   Antoine Tenart
• [PATCH v2 2/7] Documentation: bindings: document the clocks for pxa3xx-nand   Antoine Tenart
• [PATCH v2 3/7] mtd: pxa3xx_nand: add support for the Marvell Berlin nand controller   Antoine Tenart
• [PATCH v2 4/7] Documentation: bindings: add the Berlin nand controller compatible   Antoine Tenart
• [PATCH v2 5/7] mtd: nand: let Marvell Berlin SoCs select the pxa3xx driver   Antoine Tenart
• [PATCH v2 6/7] ARM: berlin: add BG2Q node for the nand   Antoine Tenart
• [PATCH v2 7/7] ARM: berlin: enable flash on the BG2Q DMP   Antoine Tenart
• [PATCH v2 0/4] mtd: pxa3xx_nand: rework the timing setup   Antoine Tenart
• [PATCH 0/5] ARM: berlin: PWM support   Antoine Tenart
• [PATCH 1/5] pwm: add the Berlin pwm controller driver   Antoine Tenart
• [PATCH 2/5] Documentation: bindings: document the Berlin PWM driver   Antoine Tenart
• [PATCH 3/5] ARM: berlin: add a PWM node on the BG2Q   Antoine Tenart
• [PATCH 4/5] ARM: berlin: add a PWM node on the BG2   Antoine Tenart
• [PATCH 5/5] ARM: berlin: add a PWM node on the BG2CD   Antoine Tenart
• [PATCH 1/5] pwm: add the Berlin pwm controller driver   Antoine Tenart
• [PATCH v2 0/5] ARM: berlin: PWM support   Antoine Tenart
• [PATCH v2 1/5] pwm: add the Berlin pwm controller driver   Antoine Tenart
• [PATCH v2 2/5] Documentation: bindings: document the Berlin PWM driver   Antoine Tenart
• [PATCH v2 3/5] ARM: berlin: add a PWM node on the BG2Q   Antoine Tenart
• [PATCH v2 4/5] ARM: berlin: add a PWM node on the BG2   Antoine Tenart
• [PATCH v2 5/5] ARM: berlin: add a PWM node on the BG2CD   Antoine Tenart
• [PATCH 0/3] ARM: berlin: add cpufreq support for the BG2Q   Antoine Tenart
• [PATCH 1/3] clk: berlin: add cpuclk   Antoine Tenart
• [PATCH 2/3] ARM: berlin: register cpufreq-dt for the BG2Q   Antoine Tenart
• [PATCH 3/3] ARM: berlin: dts: add the cpufreq-dt bindings on the BG2Q   Antoine Tenart
• [PATCH] ARM: mact-pxa: Use module_platform_driver   Vaishali Thakkar
• [PATCH] coresight: replicator: Use module_platform_driver   Vaishali Thakkar
• [PATCH v2] coresight: replicator: Use module_platform_driver   Vaishali Thakkar
• [PATCH v2] coresight: replicator: Use module_platform_driver   Vaishali Thakkar
• [PATCH v2] coresight: replicator: Use module_platform_driver   Vaishali Thakkar
• [PATCH v3] coresight: replicator: Use builtin_platform_driver()   Vaishali Thakkar
• [PATCH v2] coresight: replicator: Use module_platform_driver   Vaishali Thakkar
• [PATCH v2] coresight: replicator: Use module_platform_driver   Vaishali Thakkar
• [PATCH] soc: versatile: Use devm_kzalloc   Vaishali Thakkar
• [RESEND PATCH 4.0-rc7 v20 3/6] irqchip: gic: Introduce plumbing for IPI FIQ   Daniel Thompson
• [PATCH 4.2-rc1 v21 0/6] irq/arm: Implement arch_trigger_all_cpu_backtrace   Daniel Thompson
• [PATCH 4.2-rc1 v21 1/6] irqchip: gic: Optimize locking in gic_raise_softirq   Daniel Thompson
• [PATCH 4.2-rc1 v21 2/6] irqchip: gic: Make gic_raise_softirq FIQ-safe   Daniel Thompson
• [PATCH 4.2-rc1 v21 3/6] irqchip: gic: Introduce plumbing for IPI FIQ   Daniel Thompson
• [PATCH 4.2-rc1 v21 4/6] printk: Simple implementation for NMI backtracing   Daniel Thompson
• [PATCH 4.2-rc1 v21 5/6] x86/nmi: Use common printk functions   Daniel Thompson
• [PATCH 4.2-rc1 v21 6/6] ARM: Add support for on-demand backtrace of other CPUs   Daniel Thompson
• [PATCH] arm64: alternative: Provide if/else/endif assembler macros   Daniel Thompson
• [PATCH] arm64: Remove unused macros from assembler.h   Daniel Thompson
• [PATCH 1/3] nmi: create generic NMI backtrace implementation   Daniel Thompson
• [PATCH 3/3] ARM: add basic support for on-demand backtrace of other CPUs   Daniel Thompson
• [PATCH 1/3] nmi: create generic NMI backtrace implementation   Daniel Thompson
• [PATCH 0/3] Shared NMI backtracing support for ARM/x86   Daniel Thompson
• [PATCH] arm64: alternative: Provide if/else/endif assembler macros   Daniel Thompson
• [PATCH v2 0/5] arm64: alternative: Provide if/else/endif assembler macros   Daniel Thompson
• [PATCH v2 1/5] arm64: alternative: Provide if/else/endif assembler macros   Daniel Thompson
• [PATCH v2 2/5] arm64: mm: Adopt new alternative assembler macros   Daniel Thompson
• [PATCH v2 3/5] arm64: kernel: Adopt new alternative assembler macros   Daniel Thompson
• [PATCH v2 4/5] arm64: kvm: Adopt new alternative assembler macros   Daniel Thompson
• [PATCH v2 5/5] arm64: alternative: Remove alternative_insn macro   Daniel Thompson
• [PATCH v2 1/5] arm64: alternative: Provide if/else/endif assembler macros   Daniel Thompson
• [PATCH v3 0/5] arm64: alternative: Provide if/else/endif assembler macros   Daniel Thompson
• [PATCH v3 1/5] arm64: alternative: Provide if/else/endif assembler macros   Daniel Thompson
• [PATCH v3 2/5] arm64: mm: Adopt new alternative assembler macros   Daniel Thompson
• [PATCH v3 3/5] arm64: kernel: Adopt new alternative assembler macros   Daniel Thompson
• [PATCH v3 4/5] arm64: kvm: Adopt new alternative assembler macros   Daniel Thompson
• [PATCH v3 5/5] arm64: alternative: Remove alternative_insn macro   Daniel Thompson
• [PATCH 1/3] nmi: create generic NMI backtrace implementation   Daniel Thompson
• [PATCH v4 3/5] tee: generic TEE subsystem   Dmitry Torokhov
• [PATCH v4 3/5] tee: generic TEE subsystem   Dmitry Torokhov
• [PATCH v4 3/5] tee: generic TEE subsystem   Dmitry Torokhov
• [PATCH v2] Input: pmic8xxx-pwrkey - Support shutdown   Dmitry Torokhov
• [PATCH v2] Input: pmic8xxx-pwrkey - Support shutdown   Dmitry Torokhov
• [PATCH] input: ambakmi: Fix system PM by converting to modern callbacks   Dmitry Torokhov
• [PATCH] input: snvs_pwrkey: add linux prefix for wakeup property   Dmitry Torokhov
• [PATCH v2] input: snvs_pwrkey: use "wakeup-source" as deivce tree property name   Dmitry Torokhov
• [PATCH 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Dmitry Torokhov
• [PATCH v3] Input: pmic8xxx-pwrkey - Support shutdown   Dmitry Torokhov
• [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50   Dmitry Torokhov
• [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Dmitry Torokhov
• [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Dmitry Torokhov
• [PATCH 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Dmitry Torokhov
• [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50   Dmitry Torokhov
• [PATCH v3 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt   Dmitry Torokhov
• [PATCH 1/5] input: touchscreen: add imx6ul_tsc driver support   Dmitry Torokhov
• [PATCH] base: power: wakeirq: don't leak dev->power.wakeirq   Michael Trimarchi
• [PATCH net-next v1 1/1] drivers: net: xgene: Fix the compilation error "error: implicit declaration of function 'acpi_evaluate_integer'" in APM X-Gene ethernet driver.   Suman Tripathi
• ACPI: regression: Failed to initialize GIC IRQ controller   Suman Tripathi
• ACPI: regression: Failed to initialize GIC IRQ controller   Suman Tripathi
• [PATCH v8 2/2] mmc: host: sdhci: Disable 1.8V signaling for arasan 4.9a version of SDHCI controller.   Suman Tripathi
• arch/arm/kernel/setup.c does not compile at -O0   Suman Tripathi
• arch/arm/kernel/setup.c does not compile at -O0   Suman Tripathi
• [PATCH] ARM: dts: socfpga: Add support of Terasic DE0 Atlas board   Steffen Trumtrar
• [PATCH] ARM: dts: socfpga: Add support of Terasic DE0 Atlas board   Steffen Trumtrar
• [PATCH] ARM: socfpga: put back v7_invalidate_l1 in socfpga_secondary_startup   Steffen Trumtrar
• [PATCH] irqchip: bcm2835: Add FIQ support   Noralf Trønnes
• [PATCH] irqchip: bcm2835: Add FIQ support   Noralf Trønnes
• [PATCH] irqchip: bcm2835: Add FIQ support   Noralf Trønnes
• [PATCH 3/6] clk: sunxi: Add A33 clock for compilation   Chen-Yu Tsai
• [PATCH 3/6] clk: sunxi: Add A33 clock for compilation   Chen-Yu Tsai
• [PATCH 3/5] ARM: MCPM: make internal helpers private to the core code   Chen-Yu Tsai
• [PATCH 3/5] ARM: MCPM: make internal helpers private to the core code   Chen-Yu Tsai
• [PATCH 3/5] ARM: MCPM: make internal helpers private to the core code   Chen-Yu Tsai
• [PATCH 6/7] ARM: sun9i: Add clock indices   Chen-Yu Tsai
• [PATCH 7/7] clk: sunxi: Add a simple gates driver   Chen-Yu Tsai
• [PATCH 7/7] clk: sunxi: Add a simple gates driver   Chen-Yu Tsai
• [linux-sunxi] [PATCH 6/8] ARM: dts: axp209: Add usb_power_supply child node to the ax209 node   Chen-Yu Tsai
• [linux-sunxi] [PATCH 6/8] ARM: dts: axp209: Add usb_power_supply child node to the ax209 node   Chen-Yu Tsai
• [linux-sunxi] [PATCH 6/8] ARM: dts: axp209: Add usb_power_supply child node to the ax209 node   Chen-Yu Tsai
• [linux-sunxi] [PATCH 6/8] ARM: dts: axp209: Add usb_power_supply child node to the ax209 node   Chen-Yu Tsai
• [PATCH 0/3] ARM: dts: sun5i: hsg-h702: Enable USB OTG and LRADC keys   Chen-Yu Tsai
• [PATCH 1/3] ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADC   Chen-Yu Tsai
• [PATCH 2/3] ARM: dts: sun5i: hsg-h702: Enable USB OTG controller   Chen-Yu Tsai
• [PATCH 3/3] ARM: dts: sun5i: hsg-h702: Enable AXP209 USB power supply   Chen-Yu Tsai
• [PATCH 0/3] ARM: dts: sun5i: hsg-h702: Enable USB OTG and LRADC keys   Chen-Yu Tsai
• [linux-sunxi] Re: [PATCH 5/5] ARM: dts: sun7i: Add dts file for Wits Pro A20 DKT   Chen-Yu Tsai
• [PATCH 0/3] ARM: dts: sun5i: hsg-h702: Enable USB OTG and LRADC keys   Chen-Yu Tsai
• [PATCH 0/2] ARM: configs: update Allwinner options   Chen-Yu Tsai
• [PATCH 1/2] ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE   Chen-Yu Tsai
• [PATCH 2/2] ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, crytodev   Chen-Yu Tsai
• [PATCH v2 0/2] ARM: dts: sun5i: hsg-h702: Enable USB OTG and LRADC keys   Chen-Yu Tsai
• [PATCH v2 1/2] ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADC   Chen-Yu Tsai
• [PATCH v2 2/2] ARM: dts: sun5i: hsg-h702: Enable USB OTG controller   Chen-Yu Tsai
• [PATCH v2 0/2] ARM: configs: update Allwinner options   Chen-Yu Tsai
• [PATCH v2 1/2] ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE   Chen-Yu Tsai
• [PATCH v2 2/2] ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev   Chen-Yu Tsai
• [PATCH v2 2/2] ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev   Chen-Yu Tsai
• [linux-sunxi] Re: [PATCH 5/5] ARM: dts: sun7i: Add dts file for Wits Pro A20 DKT   Chen-Yu Tsai
• [linux-sunxi] Re: [PATCH 5/5] ARM: dts: sun7i: Add dts file for Wits Pro A20 DKT   Chen-Yu Tsai
• [PATCH] KVM: Add Kconfig option to signal cross-endian guests   Michael S. Tsirkin
• [PATCH v6 1/4] dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings   Michael Turquette
• [PATCH v5 1/2] dt-bindings: mediatek: Add MT8173 cpufreq driver binding   Michael Turquette
• [PATCH v2 1/7] clk: Add a basic factor clock   Michael Turquette
• [PATCH v2 1/5] clk: remove duplicated code with __clk_set_parent_after   Michael Turquette
• [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250   Michael Turquette
• [PATCH v3 1/4] clk: samsung: exynos5250: add cpu clock configuration data and instantiate cpu clock   Michael Turquette
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Michael Turquette
• [PATCH v2 1/7] clk: Add a basic factor clock   Michael Turquette
• [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250   Michael Turquette
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Michael Turquette
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Michael Turquette
• [PATCH v7 0/5] clk: Provide support for always-on clocks   Michael Turquette
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Michael Turquette
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Michael Turquette
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Michael Turquette
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Michael Turquette
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Michael Turquette
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Michael Turquette
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Michael Turquette
• [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework   Michael Turquette
• [RFC PATCH 0/7] fsl-quadspi: Allow additional device combinations.   Cory Tusar
• [RFC PATCH 1/7] ARM: dts: vf610: Add missing QuadSPI register mapping and names.   Cory Tusar
• [RFC PATCH 2/7] ARM: dts: vfxxx: Include support for qspi1 functionality.   Cory Tusar
• [RFC PATCH 3/7] mtd: fsl-quadspi: Support both 24- and 32-bit addressed commands.   Cory Tusar
• [RFC PATCH 4/7] mtd: fsl-quadspi: Use per-device clk_rate.   Cory Tusar
• [RFC PATCH 5/7] mtd: fsl-quadspi: Allow non-contiguous flash layouts.   Cory Tusar
• [RFC PATCH 6/7] mtd: spi-nor: Add support for Micron MT25QL02GC serial flash.   Cory Tusar
• [RFC PATCH 7/7] ARM: dts: vf610-twr: Enable QSPI and map flash devices.   Cory Tusar
• [RFC PATCH 2/7] ARM: dts: vfxxx: Include support for qspi1 functionality.   Cory Tusar
• [PATCH v1 0/7] fsl-quadspi: Allow additional device combinations.   Cory Tusar
• [PATCH v1 1/7] ARM: dts: vf610: Add missing QuadSPI register mapping and names.   Cory Tusar
• [PATCH v1 2/7] ARM: dts: vfxxx: Include support for qspi1 functionality.   Cory Tusar
• [PATCH v1 3/7] mtd: fsl-quadspi: Support both 24- and 32-bit addressed commands.   Cory Tusar
• [PATCH v1 4/7] mtd: fsl-quadspi: Use per-device clk_rate.   Cory Tusar
• [PATCH v1 5/7] mtd: fsl-quadspi: Allow non-contiguous flash layouts.   Cory Tusar
• [PATCH v1 6/7] mtd: spi-nor: Add support for Micron MT25QL02GC serial flash.   Cory Tusar
• [PATCH v1 7/7] ARM: dts: vf610-twr: Enable QSPI and map flash devices.   Cory Tusar
• [PATCH 0/1] Add support for esdhc0 on Vybrid.   Cory Tusar
• [PATCH 1/1] ARM: dts: vfxxx: Include support for esdhc0 functionality.   Cory Tusar
• [PATCH 0/1] Add support for esdhc0 on Vybrid.   Cory Tusar
• [PATCH - resend for 4.2-rc2] ARM: DTS: dra7x: Integrate sDMA crossbar   Peter Ujfalusi
• [PATCH 0/2] ARM: DTS: am437x-sk-evm: Use simple-card for audio support   Peter Ujfalusi
• [PATCH 1/2] ARM: DTS: am437x-sk-evm: Add sleep pin settings for mcasp1   Peter Ujfalusi
• [PATCH 2/2] ARM: DTS: am437x-sk-evm: Switch using simple-audio-card for audio support   Peter Ujfalusi
• [PATCH 2/2] ARM: DTS: am437x-sk-evm: Switch using simple-audio-card for audio support   Peter Ujfalusi
• [PATCH 0/2] ARM: DTS: am437x-sk-evm: Use simple-card for audio support   Peter Ujfalusi
• [PATCH v2 00/20] ARM: DTS: am335x/am43xx: Audio support and fixes for audio   Peter Ujfalusi
• [PATCH v2 01/20] ARM: omap2plus_defconfig: Enable audio related config options   Peter Ujfalusi
• [PATCH v2 02/20] ARM: DTS: am437x-sk-evm: Add sleep pin settings for mcasp1   Peter Ujfalusi
• [PATCH v2 03/20] ARM: DTS: am437x-sk-evm: Switch using simple-audio-card for audio support   Peter Ujfalusi
• [PATCH v2 04/20] ARM: DTS: am43xx-epos-evm: Add gpio-hog for configuring the display/audio mux   Peter Ujfalusi
• [PATCH v2 05/20] ARM: DTS: am43xx-epos-evm: Add regulator for VBAT and DCDC4 of tps65218   Peter Ujfalusi
• [PATCH v2 06/20] ARM: DTS: am43xx-epos-evm: McASP1 node for audio support   Peter Ujfalusi
• [PATCH v2 07/20] ARM: DTS: am43xx-epos-evm: Add node for tlv320aic3111 audio codec   Peter Ujfalusi
• [PATCH v2 08/20] ARM: DTS: am43xx-epos-evm: Enable analog audio via simple-card   Peter Ujfalusi
• [PATCH v2 09/20] ARM: DTS: am437x-gp-evm: Add gpio-hog for configuring the display/audio mux   Peter Ujfalusi
• [PATCH v2 10/20] ARM: DTS: am437x-gp-evm: Rename fixed regulator vmmcsd_fixed to evm_v3_3d   Peter Ujfalusi
• [PATCH v2 11/20] ARM: DTS: am437x-gp-evm: Add node for tlv320aic3106 audio codec   Peter Ujfalusi
• [PATCH v2 12/20] ARM: DTS: am437x-gp-evm: McASP1 node for audio support   Peter Ujfalusi
• [PATCH v2 13/20] ARM: DTS: am437x-gp-evm: Enable analog audio via simple-card   Peter Ujfalusi
• [PATCH v2 14/20] ARM: DTS: am335x-evmsk: Fix mcasp1 node's indentation   Peter Ujfalusi
• [PATCH v2 15/20] ARM: DTS: am335x-evmsk: Add sleep pin settings for mcasp1   Peter Ujfalusi
• [PATCH v2 16/20] ARM: DTS: am335x-evmsk: Switch using simple-audio-card for audio support   Peter Ujfalusi
• [PATCH v2 17/20] ARM: DTS: am335x-evm: Fix mcasp1 node's indentation   Peter Ujfalusi
• [PATCH v2 18/20] ARM: DTS: am335x-evm: Rename pinctrl section for McASP1   Peter Ujfalusi
• [PATCH v2 19/20] ARM: DTS: am335x-evm: Add sleep pin settings for mcasp1   Peter Ujfalusi
• [PATCH v2 20/20] ARM: DTS: am335x-evm: Switch using simple-audio-card for audio support   Peter Ujfalusi
• [PATCH 0/2] ARM: shmobile: Add JPU device nodes to Renesas R-Car SoCs.   Mikhail Ulyanov
• [PATCH 1/2] ARM: shmobile: r8a7790: Add JPU device node.   Mikhail Ulyanov
• [PATCH 2/2] ARM: shmobile: r8a7791: Add JPU device node.   Mikhail Ulyanov
• [PATCH 08/18] ARM/ks8695/time: Migrate to new 'set-state' interface   Greg Ungerer
• [RFC 2/3] i2c: mux: demux-pinctrl: add driver   Geert Uytterhoeven
• [RFC 3/3] ARM: shmobile: r8a7790: rework dts to use i2c demuxer   Geert Uytterhoeven
• [PATCH v5 2/6] arch: unify ioremap prototypes and macro aliases   Geert Uytterhoeven
• [PATCH] gpio: msm: Remove empty msm_gpio_{request,free}()   Geert Uytterhoeven
• [PATCH v3 00/16] ARM: shmobile: Add CPG/MSTP Clock Domain   Geert Uytterhoeven
• [PATCH v3 01/16] clk: shmobile: Add CPG/MSTP Clock Domain support   Geert Uytterhoeven
• [PATCH v3 02/16] clk: shmobile: r8a7778: Add CPG/MSTP Clock Domain support   Geert Uytterhoeven
• [PATCH v3 03/16] clk: shmobile: r8a7779: Add CPG/MSTP Clock Domain support   Geert Uytterhoeven
• [PATCH v3 04/16] clk: shmobile: rcar-gen2: Add CPG/MSTP Clock Domain support   Geert Uytterhoeven
• [PATCH v3 05/16] clk: shmobile: rz: Add CPG/MSTP Clock Domain support   Geert Uytterhoeven
• [PATCH v3 06/16] ARM: shmobile: r7s72100 dtsi: Add CPG/MSTP Clock Domain   Geert Uytterhoeven
• [PATCH v3 07/16] ARM: shmobile: r8a7778 dtsi: Add CPG/MSTP Clock Domain   Geert Uytterhoeven
• [PATCH v3 08/16] ARM: shmobile: r8a7779 dtsi: Add CPG/MSTP Clock Domain   Geert Uytterhoeven
• [PATCH v3 09/16] ARM: shmobile: r8a7790 dtsi: Add CPG/MSTP Clock Domain   Geert Uytterhoeven
• [PATCH v3 10/16] ARM: shmobile: r8a7791 dtsi: Add CPG/MSTP Clock Domain   Geert Uytterhoeven
• [PATCH v3 11/16] ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain   Geert Uytterhoeven
• [PATCH v3 12/16] ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain   Geert Uytterhoeven
• [PATCH v3 13/16] drivers: sh: Disable legacy default PM Domain on emev2   Geert Uytterhoeven
• [PATCH v3 14/16] drivers: sh: Disable PM runtime for multi-platform ARM with genpd   Geert Uytterhoeven
• [PATCH v3 15/16] clk: shmobile: mstp: Consider "zb_clk" suitable for power management   Geert Uytterhoeven
• [PATCH v3 16/16] ARM: shmobile: R-Mobile: Use CPG/MSTP Clock Domain attach/detach helpers   Geert Uytterhoeven
• [PATCH v2 3/4] ARM: mvebu: Allow using the GIC for wakeup in standby mode   Geert Uytterhoeven
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Geert Uytterhoeven
• [PATCH RFC v2 09/16] arm: domain: Add platform callbacks for domain power on/off   Geert Uytterhoeven
• Possible regression due to "tick: broadcast: Prevent livelock from event handler"   Geert Uytterhoeven
• [PATCH] thermal: consistently use int for temperatures   Geert Uytterhoeven
• [PATCH] ARM: shmobile: kzm9g dts: Add adxl345-specific compatible property   Geert Uytterhoeven
• [PATCH] ARM: shmobile: kzm9g dts: Add adxl345-specific compatible property   Geert Uytterhoeven
• [PATCH v2] ARM: shmobile: kzm9g dts: Use adxl345-specific compatible property   Geert Uytterhoeven
• [PATCH v5 2/6] arch: unify ioremap prototypes and macro aliases   Geert Uytterhoeven
• [PATCH/RFC 00/11] ARM: shmobile: Let CPG use syscon for MD pin values   Geert Uytterhoeven
• [PATCH/RFC 01/11] clk: shmobile: rcar-gen2: Obtain MD pin values using syscon/regmap   Geert Uytterhoeven
• [PATCH/RFC 02/11] ARM: shmobile: r8a7790 dtsi: Add device node for RST module   Geert Uytterhoeven
• [PATCH/RFC 03/11] ARM: shmobile: r8a7791 dtsi: Add device node for RST module   Geert Uytterhoeven
• [PATCH/RFC 04/11] ARM: shmobile: r8a7793 dtsi: Add device node for RST module   Geert Uytterhoeven
• [PATCH/RFC 05/11] ARM: shmobile: r8a7794 dtsi: Add device node for RST module   Geert Uytterhoeven
• [PATCH/RFC 06/11] ARM: shmobile: r8a7790: Link CPG to RST using "renesas, modemr"   Geert Uytterhoeven
• [PATCH/RFC 07/11] ARM: shmobile: r8a7791: Link CPG to RST using "renesas, modemr"   Geert Uytterhoeven
• [PATCH/RFC 08/11] ARM: shmobile: r8a7793: Link CPG to RST using "renesas, modemr"   Geert Uytterhoeven
• [PATCH/RFC 09/11] ARM: shmobile: r8a7794: Link CPG to RST using "renesas, modemr"   Geert Uytterhoeven
• [PATCH/RFC 10/11] ARM: shmobile: rcar-gen2: Use syscon to configure the CPG   Geert Uytterhoeven
• [PATCH/RFC 11/11] clk: shmobile: rcar-gen2: Remove obsolete rcar_gen2_clocks_init()   Geert Uytterhoeven
• [PATCH/RFC 06/11] ARM: shmobile: r8a7790: Link CPG to RST using "renesas, modemr"   Geert Uytterhoeven
• [PATCH V3 2/5] mm: mlock: Add new mlock, munlock, and munlockall system calls   Geert Uytterhoeven
• [PATCH/RFC 06/11] ARM: shmobile: r8a7790: Link CPG to RST using "renesas, modemr"   Geert Uytterhoeven
• [PATCH V4] PM / Domains: Remove intermediate states from the power off sequence   Geert Uytterhoeven
• Build regressions/improvements in v4.2-rc2   Geert Uytterhoeven
• [PATCH 00/15] ARM: shmobile: Remove legacy sh73a0/kzm9g and r8a7740/armadillo   Geert Uytterhoeven
• Build regressions/improvements in v4.2-rc2   Geert Uytterhoeven
• [PATCH 1/7] ARM: shmobile: r8a73a4 dtsi: Add missing "gpio-ranges" to gpio node   Geert Uytterhoeven
• [PATCH] ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig   Geert Uytterhoeven
• [PATCH] ARM: multi_v7_defconfig: Remove Marzen   Geert Uytterhoeven
• [PATCH v2] ARM: l2c: Add support for the "arm, shared-override" property   Geert Uytterhoeven
• [PATCH 0/7] ARM: shmobile: Move gpio ranges from C code to DT   Geert Uytterhoeven
• [RFC PATCH 00/15] pwm: add support for atomic update   Tomi Valkeinen
• [PATCH] bcma: populate bus DT subnodes as platform_device-s   Kalle Valo
• [PATCH] bcma: populate bus DT subnodes as platform_device-s   Kalle Valo
• [PATCH] bcma: fix build error when build as module   Kalle Valo
• [PATCH v6 01/13] clk: qcom: Add support for GDSCs   Stanimir Varbanov
• [PATCH v6 03/13] clk: qcom: gdsc: Use PM clocks to control gdsc clocks   Stanimir Varbanov
• [PATCH v7 12/13] clk: qcom: gdsc: Add GDSCs in apq8084 MMCC   Stanimir Varbanov
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Marek Vasut
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Marek Vasut
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Marek Vasut
• [PATCH 4/7] Documentation: mtd: add a DT property to set the latency code of Spansion memory   Marek Vasut
• [PATCH V4 RFC 0/3] nvmem: add ocotp support for i.MX23 and i.MX28   Marek Vasut
• [PATCH V4 RFC 2/3] nvmem: add driver for ocotp in i.MX23 and i.MX28   Marek Vasut
• [PATCH V4 RFC 2/3] nvmem: add driver for ocotp in i.MX23 and i.MX28   Marek Vasut
• [PATCH V4 RFC 0/3] nvmem: add ocotp support for i.MX23 and i.MX28   Marek Vasut
• [PATCH 4/7] Documentation: mtd: add a DT property to set the latency code of Spansion memory   Marek Vasut
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Marek Vasut
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Marek Vasut
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Marek Vasut
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Marek Vasut
• [PATCH v2 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change   Marek Vasut
• [PATCH v2 2/5] Documentation: mtd: add a DT property to set the number of dummy cycles   Marek Vasut
• [PATCH v2 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller   Marek Vasut
• [PATCH v2 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change   Marek Vasut
• [PATCH v2 2/5] Documentation: mtd: add a DT property to set the number of dummy cycles   Marek Vasut
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Marek Vasut
• [PATCH v2 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller   Marek Vasut
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Marek Vasut
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Marek Vasut
• [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.   Marek Vasut
• [PATCH v6 1/4] drm/layerscape: Add Freescale DCU DRM driver   Emil Velikov
• [PATCH v2 3/4] of: Add NVIDIA Tegra VIC binding   Emil Velikov
• [PATCH] drm/rockchip: use drm_gem_mmap helpers   Daniel Vetter
• [PATCH v6 1/4] drm/layerscape: Add Freescale DCU DRM driver   Daniel Vetter
• [PATCH v6 1/4] drm/layerscape: Add Freescale DCU DRM driver   Daniel Vetter
• [PATCH v7 1/4] drm/layerscape: Add Freescale DCU DRM driver   Daniel Vetter
• [PATCH v11 1/5] drm/layerscape: Add Freescale DCU DRM driver   Daniel Vetter
• [Intel-gfx] [PATCH v2 12/25] i915: switch from acpi_os_ioremap to ioremap   Daniel Vetter
• [PATCH v13 0/6] drm/layerscape: Add Freescale DCU DRM driver   Daniel Vetter
• [PATCH] KVM: Add Kconfig option to signal cross-endian guests   Laurent Vivier
• [PATCH v1 0/3] Have Tegra's GPIO chip depend explicitly on the pinctrl device   Tomeu Vizoso
• [PATCH v1 3/3] ARM: tegra: Add gpio-ranges property   Tomeu Vizoso
• [PATCH v2 0/3] Have Tegra's GPIO chip depend explicitly on the pinctrl device   Tomeu Vizoso
• [PATCH v2 3/3] ARM: tegra: Add gpio-ranges property   Tomeu Vizoso
• [PATCH 04/13] pinctrl: tegra: Only set the gpio range if needed   Tomeu Vizoso
• [PATCH 04/13] pinctrl: tegra: Only set the gpio range if needed   Tomeu Vizoso
• [PATCH 04/13] pinctrl: tegra: Only set the gpio range if needed   Tomeu Vizoso
• [RFC PATCH 0/16] Declarative specification of resources (aka devm_probe)   Tomeu Vizoso
• [RFC PATCH 01/16] typecheck_member and offsetof_t   Tomeu Vizoso
• [RFC PATCH 02/16] add devm_acquire_resources()   Tomeu Vizoso
• [RFC PATCH 03/16] Add DEVM_ALLOC()   Tomeu Vizoso
• [RFC PATCH 04/16] Add DEVM_IOMAP()   Tomeu Vizoso
• [RFC PATCH 05/16] Add DEVM_RESET()   Tomeu Vizoso
• [RFC PATCH 06/16] Add DEVM_CLOCK()   Tomeu Vizoso
• [RFC PATCH 07/16] Add DEVM_FWNODE()   Tomeu Vizoso
• [RFC PATCH 08/16] Add DEVM_IRQ()   Tomeu Vizoso
• [RFC PATCH 09/16] Add DEVM_GPIO_NAMED()   Tomeu Vizoso
• [RFC PATCH 10/16] Add DEVM_REGULATOR()   Tomeu Vizoso
• [RFC PATCH 11/16] Add DEVM_TEGRA_DPAUX()   Tomeu Vizoso
• [RFC PATCH 12/16] Add DEVM_TEGRA_OUTPUT()   Tomeu Vizoso
• [RFC PATCH 13/16] tegra-sor: Use devm_resource   Tomeu Vizoso
• [RFC PATCH 14/16] tegra-dpaux: Use devm_resource   Tomeu Vizoso
• [RFC PATCH 15/16] tegra-max98090: Use devm_resource   Tomeu Vizoso
• [RFC PATCH 16/16] fixed-regulator: Use devm_resource   Tomeu Vizoso
• [PATCH v2 0/22] On-demand device probing   Tomeu Vizoso
• [PATCH v2 01/22] platform: delay device-driver matches until late_initcall   Tomeu Vizoso
• [PATCH v2 02/22] of/platform: Set fwnode field for new devices   Tomeu Vizoso
• [PATCH v2 03/22] device property: add fwnode_get_name()   Tomeu Vizoso
• [PATCH v2 04/22] of/platform: add of_platform_device_find()   Tomeu Vizoso
• [PATCH v2 05/22] ACPI: add acpi_dev_get_device()   Tomeu Vizoso
• [PATCH v2 06/22] device property: add fwnode_ensure_device()   Tomeu Vizoso
• [PATCH v2 07/22] gpio: Probe GPIO drivers on demand   Tomeu Vizoso
• [PATCH v2 08/22] gpio: Probe pinctrl devices on demand   Tomeu Vizoso
• [PATCH v2 09/22] regulator: core: Reduce critical area in _regulator_get   Tomeu Vizoso
• [PATCH v2 10/22] regulator: core: Probe regulators on demand   Tomeu Vizoso
• [PATCH v2 11/22] drm: Probe panels on demand   Tomeu Vizoso
• [PATCH v2 12/22] drm/tegra: Probe dpaux devices on demand   Tomeu Vizoso
• [PATCH v2 13/22] i2c: core: Probe i2c master devices on demand   Tomeu Vizoso
• [PATCH v2 14/22] pwm: Probe PWM chip devices on demand   Tomeu Vizoso
• [PATCH v2 15/22] backlight: Probe backlight devices on demand   Tomeu Vizoso
• [PATCH v2 16/22] usb: phy: Probe phy devices on demand   Tomeu Vizoso
• [PATCH v2 17/22] clk: Probe clk providers on demand   Tomeu Vizoso
• [PATCH v2 18/22] pinctrl: Probe pinctrl devices on demand   Tomeu Vizoso
• [PATCH v2 19/22] phy: core: Probe phy providers on demand   Tomeu Vizoso
• [PATCH v2 20/22] dma: of: Probe DMA controllers on demand   Tomeu Vizoso
• [PATCH v2 21/22] power-supply: Probe power supplies on demand   Tomeu Vizoso
• [PATCH v2 22/22] ASoC: core: Probe components on demand   Tomeu Vizoso
• [PATCH v2 04/22] of/platform: add of_platform_device_find()   Tomeu Vizoso
• [PATCH v2 04/22] of/platform: add of_platform_device_find()   Tomeu Vizoso
• [PATCH v2 04/22] of/platform: add of_platform_device_find()   Tomeu Vizoso
• [PATCH v2 04/22] of/platform: add of_platform_device_find()   Tomeu Vizoso
• [PATCH v2 01/22] platform: delay device-driver matches until late_initcall   Tomeu Vizoso
• [PATCH v2 0/22] On-demand device probing   Tomeu Vizoso
• [PATCH v2 04/22] of/platform: add of_platform_device_find()   Tomeu Vizoso
• [Xen-devel] [PATCH v2 01/20] xen: Add Xen specific page definition   David Vrabel
• [Xen-devel] [PATCH v2 02/20] xen: Introduce a function to split a Linux page into Xen page   David Vrabel
• [Xen-devel] [PATCH v2 04/20] xen/grant: Add helper gnttab_page_grant_foreign_access_ref   David Vrabel
• [Xen-devel] [PATCH v2 01/20] xen: Add Xen specific page definition   David Vrabel
• [PATCH v2 10/20] xen/xenbus: Use Xen page definition   David Vrabel
• [PATCH v2 11/20] tty/hvc: xen: Use xen page definition   David Vrabel
• [Xen-devel] [PATCH v2 02/20] xen: Introduce a function to split a Linux page into Xen page   David Vrabel
• [Xen-devel] [PATCH v2 01/20] xen: Add Xen specific page definition   David Vrabel
• [PATCH v2 13/20] xen/events: fifo: Make it running on 64KB granularity   David Vrabel
• [Xen-devel] [PATCH] xen/events: Support event channel rebind on ARM   David Vrabel
• [PATCH v2] xen/events: Support event channel rebind on ARM   David Vrabel
• [Xen-devel] [PATCH v3] xen/events: Support event channel rebind on ARM   David Vrabel
• [Xen-devel] [PATCH 2/8] xen: Make clear that swiotlb and biomerge are dealing with DMA address   David Vrabel
• [Xen-devel] [PATCH 4/8] xen: Use the correctly the Xen memory terminologies   David Vrabel
• [Xen-devel] [PATCH 8/8] xen/privcmd: Further s/MFN/GFN/ clean-up   David Vrabel
• [Xen-devel] [PATCH 4/8] xen: Use the correctly the Xen memory terminologies   David Vrabel
• [PATCH] i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC   Anurag Kumar Vulisha
• [PATCH v2] i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC   Anurag Kumar Vulisha
• [PATCH 0/3] ARM: OMAP2+: hwmod: RTC: Add lock and unlock hooks   Lokesh Vutla
• [PATCH 0/3] ARM: OMAP2+: hwmod: RTC: Add lock and unlock hooks   Lokesh Vutla
• [PATCH 3/3] ARM: AMx3xx: hwmod: RTC: Add lock and unlock functions   Lokesh Vutla
• [PATCH 2/3] ARM: DRA: hwmod: RTC: Add lock and unlock functions   Lokesh Vutla
• [PATCH v2 0/3] ARM: OMAP2+: hwmod: RTC: Add lock and unlock hooks   Lokesh Vutla
• [PATCH v2 1/3] ARM: hwmod: RTC: Add lock and unlock functions   Lokesh Vutla
• [PATCH v2 2/3] ARM: DRA7: RTC: Add lock and unlock functions   Lokesh Vutla
• [PATCH v2 3/3] ARM: AMx3xx: RTC: Add lock and unlock functions   Lokesh Vutla
• [PATCH v3 0/3] ARM: OMAP2+: hwmod: RTC: Add lock and unlock hooks   Lokesh Vutla
• [PATCH v3 1/3] ARM: hwmod: RTC: Add lock and unlock functions   Lokesh Vutla
• [PATCH v3 2/3] ARM: DRA7: RTC: Add lock and unlock functions   Lokesh Vutla
• [PATCH v3 3/3] ARM: AMx3xx: RTC: Add lock and unlock functions   Lokesh Vutla
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller   Ranjit Waghmode
• [RFC PATCH 1/2] spi: zynqmp: gqspi: add support for dual parallel mode configuration   Ranjit Waghmode
• [RFC PATCH 2/2] spi: zynqmp: gqspi: add support for stacked mode configuration   Ranjit Waghmode
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller   Ranjit Abhimanyu Waghmode
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller   Ranjit Abhimanyu Waghmode
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller   Ranjit Abhimanyu Waghmode
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller   Ranjit Abhimanyu Waghmode
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller   Ranjit Abhimanyu Waghmode
• [RFC PATCH v6 3/3] drivers: nvmem: Add Vybrid OCOTP support   Stefan Wahren
• [RFC PATCH v6 3/3] drivers: nvmem: Add Vybrid OCOTP support   Stefan Wahren
• [RFC PATCH v6 3/3] drivers: nvmem: Add Vybrid OCOTP support   Stefan Wahren
• [PATCH v7 0/9] Add simple NVMEM Framework via regmap.   Stefan Wahren
• [PATCH v7 2/9] nvmem: Add a simple NVMEM framework for consumers   Stefan Wahren
• [PATCH v7 0/9] Add simple NVMEM Framework via regmap.   Stefan Wahren
• [PATCH] serial: mxs-auart: keep the AUART unit in reset state when not in use   Stefan Wahren
• [PATCH v2] serial: mxs-auart: keep the AUART unit in reset state when not in use   Stefan Wahren
• [PATCH v3] serial: mxs-auart: keep the AUART unit in reset state when not in use   Stefan Wahren
• [PATCH 14/41] clocksource: mxs: Migrate to new 'set-state' interface   Stefan Wahren
• [PATCH V4 RFC 0/3] nvmem: add ocotp support for i.MX23 and i.MX28   Stefan Wahren
• [PATCH V4 RFC 1/3] DT: nvmem: add binding for mxs-ocotp   Stefan Wahren
• [PATCH V4 RFC 2/3] nvmem: add driver for ocotp in i.MX23 and i.MX28   Stefan Wahren
• [PATCH V4 RFC 3/3] mxs: enable ocotp for i.MX23 and i.MX28   Stefan Wahren
• [PATCH V4 RFC 0/3] nvmem: add ocotp support for i.MX23 and i.MX28   Stefan Wahren
• [PATCH V4 RFC 2/3] nvmem: add driver for ocotp in i.MX23 and i.MX28   Stefan Wahren
• [PATCH v8 1/9] nvmem: Add a simple NVMEM framework for nvmem providers   Stefan Wahren
• [PATCH v8 2/9] nvmem: Add a simple NVMEM framework for consumers   Stefan Wahren
• [PATCH v8 8/9] nvmem: sunxi: Move the SID driver to the nvmem framework   Stefan Wahren
• [PATCH v2] ARM: dts: i.MX35: Fix can support.   Stefan Wahren
• [PATCH v2] ARM: dts: i.MX35: Fix can support.   Stefan Wahren
• [PATCH v8 8/9] nvmem: sunxi: Move the SID driver to the nvmem framework   Stefan Wahren
• [PATCH v8 1/9] nvmem: Add a simple NVMEM framework for nvmem providers   Stefan Wahren
• [PATCH 1/2] ARM: ux500: define serial port aliases   Linus Walleij
• [PATCH 2/2] ARM: ux500: fix MMC/SD card regression   Linus Walleij
• [PATCH] pinctrl: abx500: remove strict mode   Linus Walleij
• [PATCH 1/2] ARM: ep93xx: vision_ep9307: enable DMA for SPI   Linus Walleij
• [PATCH 2/2] ARM: ep93xx: vision_ep9307: add audio support   Linus Walleij
• [PATCH 1/3] ARM: ep93xx: add GPIO I2C to defconfig   Linus Walleij
• [PATCH 2/3] ARM: ep93xx: add DMA engine to the defconfig   Linus Walleij
• [PATCH 3/3] ARM: ep93xx: add framebuffer to the defconfig   Linus Walleij
• Gemini Soc timers   Linus Walleij
• [PATCH] ARM: ep93xx: simone: enable DMA on the SPI host   Linus Walleij
• Gemini Soc timers   Linus Walleij
• [PATCH 1/2] ARM: ux500: define serial port aliases   Linus Walleij
• [PATCH 1/2] ARM: ux500: define serial port aliases   Linus Walleij
• [PATCH 1/2] ARM: ux500: define serial port aliases   Linus Walleij
• [PATCH 00/15] ARM: shmobile: Remove legacy sh73a0/kzm9g and r8a7740/armadillo   Linus Walleij
• [RESEND PATCH 1/2] pinctrl: change function behavior for per pin muxing controllers   Linus Walleij
• [RESEND PATCH 1/2] pinctrl: change function behavior for per pin muxing controllers   Linus Walleij
• [PATCH 01/13] gpiolib: Fix docs for gpiochip_add_pingroup_range   Linus Walleij
• [PATCH v3 1/4] gpio: brcmstb: fix null ptr dereference in driver remove   Linus Walleij
• [PATCH v3 2/4] dt-bindings: brcmstb-gpio: document properties for wakeup   Linus Walleij
• [PATCH v3 3/4] gpio: brcmstb: Add interrupt and wakeup source support   Linus Walleij
• [PATCH v3 4/4] gpio: brcmstb: support wakeup from S5 cold boot   Linus Walleij
• [PATCH 04/13] pinctrl: tegra: Only set the gpio range if needed   Linus Walleij
• [PATCH v2 3/8] Document: dt: binding: imx: update document for imx6ul support   Linus Walleij
• [PATCH v2 4/8] ARM: pinctrl: imx: add i.mx6ul pinctrl driver   Linus Walleij
• [PATCH v2 5/8] ARM: dts: add i.mx6ul pin function include file   Linus Walleij
• [PATCH v2 4/8] ARM: pinctrl: imx: add i.mx6ul pinctrl driver   Linus Walleij
• [PATCH v2 5/8] ARM: dts: add i.mx6ul pin function include file   Linus Walleij
• [PATCH 3/4] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Linus Walleij
• [PATCH 7/9] arm: twr-k70f120m: IOMUX driver for Kinetis SoC   Linus Walleij
• [PATCH v2 5/9] arm: twr-k70f120m: IOMUX driver for Kinetis SoC   Linus Walleij
• [PATCH v2 4/9] arm: twr-k70f120m: timer driver for Kinetis SoC   Linus Walleij
• [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC   Linus Walleij
• [PATCH][v3] ARM: imx: pinctrl-imx: imx7d: add support for iomuxc lpsr   Linus Walleij
• [PATCH 15/41] clocksource: nomadik-mtu: Migrate to new 'set-state' interface   Linus Walleij
• [PATCH 33/41] clocksource: integrator: Migrate to new 'set-state' interface   Linus Walleij
• [PATCH 38/41] clocksource: u300: Migrate to new 'set-state' interface   Linus Walleij
• [PATCH] gpio: zynq: add missing module_exit function   Linus Walleij
• [PATCH v3] gpio: UniPhier: add driver for UniPhier GPIO controller   Linus Walleij
• [PATCH v3] gpio: UniPhier: add driver for UniPhier GPIO controller   Linus Walleij
• [PATCH v2 1/7] pinctrl: UniPhier: add UniPhier pinctrl core support   Linus Walleij
• [PATCH v2 2/7] pinctrl: UniPhier: add UniPhier PH1-LD4 pinctrl driver   Linus Walleij
• [PATCH v2 3/7] pinctrl: UniPhier: add UniPhier PH1-Pro4 pinctrl driver   Linus Walleij
• [PATCH v2 4/7] pinctrl: UniPhier: add UniPhier PH1-sLD8 pinctrl driver   Linus Walleij
• [PATCH v2 5/7] pinctrl: UniPhier: add UniPhier PH1-Pro5 pinctrl driver   Linus Walleij
• [PATCH v2 6/7] pinctrl: UniPhier: add UniPhier ProXstream2 pinctrl driver   Linus Walleij
• [PATCH v2 7/7] pinctrl: UniPhier: add UniPhier PH1-LD6b pinctrl driver   Linus Walleij
• [PATCH v3] gpio: UniPhier: add driver for UniPhier GPIO controller   Linus Walleij
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Linus Walleij
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Linus Walleij
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Linus Walleij
• [PATCH 1/2] pinctrl: meson: Enable GPIO IRQs   Linus Walleij
• [patch v2 1/2] pinctrl: samsung: don't truncate the last char   Linus Walleij
• [patch v2 2/2] pinctrl: samsung: remove "out of memory" messages   Linus Walleij
• [PATCH v3 1/3] leds: netxbig: add device tree binding   Linus Walleij
• [PATCH 0/7] ARM: shmobile: Move gpio ranges from C code to DT   Linus Walleij
• [PATCH 1/7] ARM: shmobile: r8a73a4 dtsi: Add missing "gpio-ranges" to gpio node   Linus Walleij
• [PATCH 2/2] irqchip: gic: remove reduntant gic_set_irqchip_flags   Linus Walleij
• [PATCH] gpio: zynq: Fix problem with unbalanced pm_runtime_enable   Linus Walleij
• [PATCH v2] gpio/xilinx: Use correct address when setting initial values.   Linus Walleij
• [RFC PATCH] pinctrl-single: Use of pinctrl-single for external device over I2C   Linus Walleij
• [PATCH] pinctrl: Drop owner assignment from platform_driver   Linus Walleij
• [PATCH 1/2] ARM: ux500: define serial port aliases   Linus Walleij
• [PATCH 1/2] ARM: ux500: define serial port aliases   Linus Walleij
• [PATCH] Subject: pinctrl: imx1-core: Fix debug output in .pin_config_set callback   Linus Walleij
• [PATCH] pinctrl: qcom: Hook pm_power_down for shutdown support   Linus Walleij
• [PATCH 04/13] pinctrl: tegra: Only set the gpio range if needed   Linus Walleij
• [PATCH 04/13] pinctrl: tegra: Only set the gpio range if needed   Linus Walleij
• [GIT PULL] EP93xx cleanups for v4.3   Linus Walleij
• [GIT PULL] EP93xx defconfig changes   Linus Walleij
• [PATCH] [v2] pinctrl: add support for Qualcomm Technologies QDF2xxx ARM64 SoCs   Linus Walleij
• [PATCH 0/9] gpiolib: Add GPIO name support   Linus Walleij
• [PATCH v2 1/7] pinctrl: UniPhier: add UniPhier pinctrl core support   Linus Walleij
• [PATCH v2 5/5] arm64: add KASan support   Linus Walleij
• [PATCH v2 5/5] arm64: add KASan support   Linus Walleij
• [PATCH] ARM/fb: ep93xx: switch framebuffer to use modedb only   Linus Walleij
• [PATCH] ARM: nomadik: disable UART0 on Nomadik boards   Linus Walleij
• [PATCH] pinctrl: nomadik: split stn8815 UART0 pin groups   Linus Walleij
• [RESEND PATCH 1/2] pinctrl: change function behavior for per pin muxing controllers   Linus Walleij
• [PATCH v2 1/2] pinctrl: dt-binding: document Conexant CX92755 SoC   Linus Walleij
• [PATCH v2 2/2] pinctrl: driver for Conexant Digicolor CX92755 pin mapping   Linus Walleij
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Linus Walleij
• [PATCH 1/4][v4] ARM: imx: imx7d-pinfunc: add gpio pad iomuxc settings   Linus Walleij
• [PATCH 1/4] pinctrl: sunxi: Use common functions to change irq_chip and handler   Linus Walleij
• [PATCH 2/4] pinctrl: sunxi: Add irq_chip name   Linus Walleij
• [PATCH 3/4] pinctrl: sunxi: Add custom irq_domain_ops   Linus Walleij
• [PATCH v2 1/2] pinctrl: sunxi: Add custom irq_domain_ops   Linus Walleij
• [PATCH v2 2/2] ARM: sunxi: dt: Convert users to the PIO interrupts binding   Linus Walleij
• [PATCH v3] pinctrl: kill off set_irq_flags usage   Linus Walleij
• [PATCH] MAINTAINERS: pinctrl: Move Thomas Abraham to CREDITS   Linus Walleij
• [PATCH] pinctrl: sirf: add power management support for atlas7   Linus Walleij
• [RESEND PATCH] pinctrl: at91: fix null pointer dereference   Linus Walleij
• [rtc-linux] [PATCH] drivers/rtc/rtc-pl031.c: reset registers in init flow   Linus Walleij
• [PATCH 0/9] gpiolib: Add GPIO name support   Linus Walleij
• [PATCH 1/2] ARM: integrator: move framebuffers to driver   Linus Walleij
• [PATCH 2/2] ARM: integrator: unexport IM-PD1 external interface   Linus Walleij
• [PATCH] ARM: integrator: add some defconfig options   Linus Walleij
• [PATCH 1/2] ARM: ux500: move ASIC ID remap to ITCM area   Linus Walleij
• [PATCH 2/2] ARM: ux500: simplify and move debug UART   Linus Walleij
• [PATCH] ARM: ux500: fix ux500 secondary CPU boot regression   Linus Walleij
• [PATCH 1/2] ARM: ux500: add an SMP enablement type and move cpu nodes   Linus Walleij
• [PATCH 2/2] ARM: ux500: simplify secondary CPU boot   Linus Walleij
• [PATCH] ARM/clocksource: use automatic DT probing   Linus Walleij
• [PATCH 01/10] ARM: ux500: delete UART static map   Linus Walleij
• OMAP baseline test results for v4.1   Paul Walmsley
• OMAP baseline test results for v4.2-rc1   Paul Walmsley
• OMAP baseline test results for v4.2-rc2   Paul Walmsley
• [PATCH v2 1/5] ARM: OMAP2+: DRA7: clockdomain: change l4per2_7xx_clkdm to SW_WKUP   Paul Walmsley
• [PATCH v2 1/5] ARM: OMAP2+: DRA7: clockdomain: change l4per2_7xx_clkdm to SW_WKUP   Paul Walmsley
• [PATCH v2 2/5] ARM: OMAP2+: DRA7: Add hwmod entries for PWMSS   Paul Walmsley
• [PATCH 1/3] ARM: OMAP2+: hwmod: add support for lock and unlock hooks   Paul Walmsley
• [PATCH 2/3] ARM: DRA: hwmod: RTC: Add lock and unlock functions   Paul Walmsley
• [PATCH 3/3] ARM: AMx3xx: hwmod: RTC: Add lock and unlock functions   Paul Walmsley
• [PATCH 0/3] ARM: OMAP2+: hwmod: RTC: Add lock and unlock hooks   Paul Walmsley
• [PATCH 1/2] ARM: OMAP2+: sparse: add missing static declaration   Paul Walmsley
• [PATCH 2/2] ARM: OMAP2+: sparse: add missing function declarations   Paul Walmsley
• [PATCH] ARM: OMAP2: Delete unnecessary checks before three function calls   Paul Walmsley
• [PATCH 0/3] ARM: OMAP2+: hwmod: RTC: Add lock and unlock hooks   Paul Walmsley
• [PATCH] ARM: OMAP2: Delete unnecessary checks before three function calls   Paul Walmsley
• [PATCH v2 1/3] ARM: hwmod: RTC: Add lock and unlock functions   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: hwmod fixes for v4.2-rc   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: PRCM and hwmod changes for v4.3   Paul Walmsley
• [PATCH v3] ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc   Paul Walmsley
• OMAP baseline test results for v4.2-rc3   Paul Walmsley
• OMAP baseline test results for v4.2-rc4   Paul Walmsley
• [PATCH] dts: ls1021a: audio: Add dts nodes for audio on LS1021A   Alison Wang
• [PATCH] arm: dts: ls1021a: Add LTC2945 node for LS1021A TWR board   Alison Wang
• [PATCH] arm: dts: ls1021a: add wakeup device ftm0 node for ls1021a   Alison Wang
• [PATCH] arm: ls1021a: utilize hrtimer based broadcast mode   Alison Wang
• [PATCH v2] ARM: dts: ls1021a: add wakeup device ftm0 node for ls1021a   Alison Wang
• [PATCH v2] ARM: dts: ls1021a: audio: Add dts nodes for audio on LS1021A   Alison Wang
• [PATCH] arm: kernel: utilize hrtimer based broadcast   Alison Wang
• [PATCH v2] ARM: configs: Add Freescale LS1021A defconfig   Alison Wang
• [PATCH] arm: dts: ls1021a: Update 'dspi' device node compatible string   Haikun Wang
• [PATCH] arm: dts: ls1021a: add wakeup device ftm0 node for ls1021a   Huan Wang
• [PATCH] arm: ls1021a: utilize hrtimer based broadcast mode   Huan Wang
• [PATCH] dts: ls1021a: audio: Add dts nodes for audio on LS1021A   Huan Wang
• [PATCH v6 1/4] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v6 2/4] drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel   Jianwei Wang
• [PATCH v6 3/4] arm/dts/ls1021a: Add DCU dts node   Jianwei Wang
• [PATCH v6 4/4] arm/dts/ls1021a: Add a TFT LCD panel dts node   Jianwei Wang
• [PATCH v7 1/4] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v7 2/4] drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel   Jianwei Wang
• [PATCH v7 3/4] arm/dts/ls1021a: Add DCU dts node   Jianwei Wang
• [PATCH v7 4/4] arm/dts/ls1021a: Add a TFT LCD panel dts node   Jianwei Wang
• [PATCH v8 1/4] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v8 2/4] drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel   Jianwei Wang
• [PATCH v8 3/4] arm/dts/ls1021a: Add DCU dts node   Jianwei Wang
• [PATCH v8 4/4] arm/dts/ls1021a: Add a TFT LCD panel dts node   Jianwei Wang
• [PATCH v9 1/4] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v9 2/4] drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel   Jianwei Wang
• [PATCH v9 3/4] arm/dts/ls1021a: Add DCU dts node   Jianwei Wang
• [PATCH v9 4/4] arm/dts/ls1021a: Add a TFT LCD panel dts node   Jianwei Wang
• [PATCH v10 1/5] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v10 2/5] devicetree: Add NEC to the vendor-prefix list   Jianwei Wang
• [PATCH v10 3/5] drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel   Jianwei Wang
• [PATCH v10 4/5] arm/dts/ls1021a: Add DCU dts node   Jianwei Wang
• [PATCH v10 5/5] arm/dts/ls1021a: Add a TFT LCD panel dts node   Jianwei Wang
• [PATCH v11 1/5] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v11 2/5] devicetree: Add NEC to the vendor-prefix list   Jianwei Wang
• [PATCH v11 3/5] drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel   Jianwei Wang
• [PATCH v11 4/5] arm/dts/ls1021a: Add DCU dts node   Jianwei Wang
• [PATCH v11 5/5] arm/dts/ls1021a: Add a TFT LCD panel dts node   Jianwei Wang
• [PATCH v11 1/5] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v12 0/6] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v12 1/6] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v12 2/6] devicetree: Add NEC to the vendor-prefix list   Jianwei Wang
• [PATCH v12 3/6] drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel   Jianwei Wang
• [PATCH v12 4/6] arm/dts/ls1021a: Add DCU dts node   Jianwei Wang
• [PATCH v12 5/6] arm/dts/ls1021a: Add a TFT LCD panel dts node   Jianwei Wang
• [PATCH v12 6/6] MAINTAINERS: add Freescale DCU DRM driver maintainer   Jianwei Wang
• [PATCH v12 0/6] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v12 1/6] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v12 2/6] devicetree: Add NEC to the vendor-prefix list   Jianwei Wang
• [PATCH v12 3/6] drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel   Jianwei Wang
• [PATCH v12 4/6] arm/dts/ls1021a: Add DCU dts node   Jianwei Wang
• [PATCH v12 5/6] arm/dts/ls1021a: Add a TFT LCD panel dts node   Jianwei Wang
• [PATCH v12 6/6] MAINTAINERS: add Freescale DCU DRM driver maintainer   Jianwei Wang
• [PATCH v12 4/6] arm/dts/ls1021a: Add DCU dts node   Jianwei Wang
• [PATCH v13 0/6] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v13 1/6] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v13 2/6] devicetree: Add NEC to the vendor-prefix list   Jianwei Wang
• [PATCH v13 3/6] drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel   Jianwei Wang
• [PATCH v13 4/6] MAINTAINERS: add Freescale DCU DRM driver maintainer   Jianwei Wang
• [PATCH v13 5/6] arm:dts:ls1021a: Add DCU dts node   Jianwei Wang
• [PATCH v13 6/6] arm:dts:ls1021a: Add a TFT LCD panel dts node   Jianwei Wang
• [PATCH v13 0/6] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v14 0/6] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v14 1/6] drm/layerscape: Add Freescale DCU DRM driver   Jianwei Wang
• [PATCH v14 2/6] devicetree: Add NEC to the vendor-prefix list   Jianwei Wang
• [PATCH v14 3/6] drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel   Jianwei Wang
• [PATCH v14 4/6] MAINTAINERS: add Freescale DCU DRM driver maintainer   Jianwei Wang
• [PATCH v14 5/6] arm:dts:ls1021a: Add DCU dts node   Jianwei Wang
• [PATCH v14 6/6] arm:dts:ls1021a: Add a TFT LCD panel dts node   Jianwei Wang
• question about i2c-designware   Kefeng Wang
• [PATCH V3 1/1] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shenwei Wang
• [PATCH V3 1/1] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shenwei Wang
• [PATCH V4 1/1] irqchip: imx-gpcv2: IMX GPCv2 drivers for wakeup source and suspend   Shenwei Wang
• [PATCH V4 1/1] irqchip: imx-gpcv2: IMX GPCv2 drivers for wakeup source and suspend   Shenwei Wang
• [PATCH V5 0/2] IMX GPCv2 drivers for wakeup source and suspend   Shenwei Wang
• [PATCH V5 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shenwei Wang
• [PATCH V5 2/2] ARM: imx: Add suspend codes for imx7D   Shenwei Wang
• [PATCH V5 0/2] IMX GPCv2 drivers for wakeup source and suspend   Shenwei Wang
• [PATCH V5 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shenwei Wang
• [PATCH V5 2/2] ARM: imx: Add suspend codes for imx7D   Shenwei Wang
• [PATCH 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Shenwei Wang
• [PATCH V5 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shenwei Wang
• [PATCH V5 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shenwei Wang
• [PATCH v6 0/2] IMX GPCv2 drivers for wakeup source and suspend   Shenwei Wang
• [PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shenwei Wang
• [PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D   Shenwei Wang
• [PATCH 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Shenwei Wang
• [PATCH v2] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Shenwei Wang
• [PATCH 1/1] misc: sram: add dev_pm_ops to support module power gate   Shenwei Wang
• [PATCH 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Shenwei Wang
• [PATCH 1/1] misc: sram: add dev_pm_ops to support module power gate   Shenwei Wang
• [PATCH v2 1/1] misc: sram: add dev_pm_ops to support module power gate   Shenwei Wang
• [PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shenwei Wang
• [PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shenwei Wang
• [PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shenwei Wang
• [PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D   Shenwei Wang
• [PATCH v7 0/2] IMX GPCv2 drivers for wakeup source and suspend   Shenwei Wang
• [PATCH v7 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shenwei Wang
• [PATCH v7 2/2] ARM: imx: Add suspend codes for imx7D   Shenwei Wang
• [PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D   Shenwei Wang
• [PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shenwei Wang
• [PATCH v7 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shenwei Wang
• [PATCH v7 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shenwei Wang
• [PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D   Shenwei Wang
• [PATCH v3 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Shenwei Wang
• [PATCH v3 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Shenwei Wang
• [PATCH v3 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Shenwei Wang
• [PATCH v3 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Shenwei Wang
• [PATCH v4 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Shenwei Wang
• [PATCH v4 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Shenwei Wang
• [PATCH v5 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Shenwei Wang
• [PATCH v3 1/1] misc: sram: add dev_pm_ops to support module power gate   Shenwei Wang
• [PATCH v7 2/2] ARM: imx: Add suspend codes for imx7D   Shenwei Wang
• [PATCH v8 0/2] IMX GPCv2 drivers for wakeup source and suspend   Shenwei Wang
• [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources   Shenwei Wang
• [PATCH v8 2/2] ARM: imx: support suspend states on imx7D   Shenwei Wang
• [RFC Patch V1 00/12] Reorganize struct msi_desc to prepare for support of generic MSI   Yijing Wang
• [PATCH part3 v12 00/10] Cleanup platform pci_domain_nr()   Yijing Wang
• [PATCH part3 v12 01/10] PCI: Save domain in pci_host_bridge   Yijing Wang
• [PATCH part3 v12 02/10] PCI: Move pci_bus_assign_domain_nr() declaration into drivers/pci/pci.h   Yijing Wang
• [PATCH part3 v12 03/10] PCI: Remove declaration for pci_get_new_domain_nr()   Yijing Wang
• [PATCH part3 v12 04/10] PCI: Introduce pci_host_assign_domain_nr() to assign domain   Yijing Wang
• [PATCH part3 v12 05/10] powerpc/PCI: Rename pcibios_root_bridge_prepare() to pcibios_root_bus_prepare()   Yijing Wang
• [PATCH part3 v12 06/10] PCI: Make pci_host_bridge hold sysdata in drvdata   Yijing Wang
• [PATCH part3 v12 07/10] PCI: Create pci host bridge prior to root bus   Yijing Wang
• [PATCH part3 v12 08/10] PCI: Introduce common pci_domain_nr() and remove platform specific code   Yijing Wang
• [PATCH part3 v12 09/10] PCI: Remove pci_bus_assign_domain_nr()   Yijing Wang
• [PATCH part3 v12 10/10] IA64/PCI: Fix build warning found by kbuild test   Yijing Wang
• [PATCH v3 0/5] PCI: hisi: Add PCIe host support for Hisilicon Soc Hip05   Zhou Wang
• [PATCH v3 1/5] ARM/PCI: remove align_resource callback in pcibios_align_resource   Zhou Wang
• [PATCH v3 2/5] PCI: designware: Add ARM64 support   Zhou Wang
• [PATCH v3 3/5] PCI: hisi: Add PCIe host support for Hisilicon Soc Hip05   Zhou Wang
• [PATCH v3 4/5] Documentation: DT: Add Hisilicon PCIe host binding   Zhou Wang
• [PATCH v3 5/5] MAINTAINERS: Add pcie-hisi maintainer   Zhou Wang
• [PATCH v3 2/5] PCI: designware: Add ARM64 support   Zhou Wang
• [PATCH v3 2/5] PCI: designware: Add ARM64 support   Zhou Wang
• [PATCH v3 2/5] PCI: designware: Add ARM64 support   Zhou Wang
• [PATCH v3 1/5] ARM/PCI: remove align_resource callback in pcibios_align_resource   Zhou Wang
• [PATCH v3 2/5] PCI: designware: Add ARM64 support   Zhou Wang
• [PATCH v2 2/4] PCI: designware: Add ARM64 support   Zhou Wang
• [PATCH v3 1/5] ARM/PCI: remove align_resource callback in pcibios_align_resource   Zhou Wang
• [PATCH v4 0/5] PCI: hisi: Add PCIe host support for Hisilicon Soc Hip05   Zhou Wang
• [PATCH v4 0/5] PCI: hisi: Add PCIe host support for Hisilicon Soc Hip05   Zhou Wang
• [PATCH v4 1/5] ARM/PCI: remove align_resource in pci_sys_data   Zhou Wang
• [PATCH v4 2/5] PCI: designware: Add ARM64 support   Zhou Wang
• [PATCH v4 3/5] PCI: hisi: Add PCIe host support for Hisilicon Soc Hip05   Zhou Wang
• [PATCH v4 4/5] Documentation: DT: Add Hisilicon PCIe host binding   Zhou Wang
• [PATCH v4 5/5] MAINTAINERS: Add pcie-hisi maintainer   Zhou Wang
• [PATCH v4 0/5] PCI: hisi: Add PCIe host support for Hisilicon Soc Hip05   Zhou Wang
• [PATCH v4 1/5] ARM/PCI: remove align_resource in pci_sys_data   Zhou Wang
• [PATCH v4 3/5] PCI: hisi: Add PCIe host support for Hisilicon Soc Hip05   Zhou Wang
• [PATCH v4 4/5] Documentation: DT: Add Hisilicon PCIe host binding   Zhou Wang
• [RFT PATCH] ARM: pci: kill pcibios_msi_controller   Zhou Wang
• [PATCH v5 0/5] PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05   Zhou Wang
• [PATCH v5 1/5] ARM/PCI: remove align_resource in pci_sys_data   Zhou Wang
• [PATCH v5 2/5] PCI: designware: Add ARM64 support   Zhou Wang
• [PATCH v5 3/5] PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05   Zhou Wang
• [PATCH v5 4/5] Documentation: DT: Add HiSilicon PCIe host binding   Zhou Wang
• [PATCH v5 5/5] MAINTAINERS: Add pcie-hisi maintainer   Zhou Wang
• [PATCH v5 2/5] PCI: designware: Add ARM64 support   Zhou Wang
• [PATCH v5 1/5] ARM/PCI: remove align_resource in pci_sys_data   Zhou Wang
• [PATCH v5 4/5] Documentation: DT: Add HiSilicon PCIe host binding   Zhou Wang
• [PATCH v5 2/5] PCI: designware: Add ARM64 support   Zhou Wang
• [PATCH v6] PCI: Store PCIe bus address in struct of_pci_range   Zhou Wang
• [PATCH v2] tegra: Enable TPM on tegra124 nyan boards   Stephen Warren
• [PATCH v1 3/3] ARM: tegra: Add gpio-ranges property   Stephen Warren
• [PATCH] irqchip: bcm2835: Add FIQ support   Stephen Warren
• [PATCH 3/4] irqchip: Add documentation for the bcm2836 interrupt controller.   Stephen Warren
• [PATCH 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Stephen Warren
• [PATCH] irqchip: bcm2835: Add FIQ support   Stephen Warren
• [PATCH 3/4] irqchip: Add documentation for the bcm2836 interrupt controller.   Stephen Warren
• [PATCH 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Stephen Warren
• [PATCH v3 2/4] staging/nvec: reimplement on top of tegra i2c driver   Stephen Warren
• [PATCH v3 4/4] dt: paz00: define nvec as child of i2c bus   Stephen Warren
• [PATCH] irqchip: bcm2835: Add FIQ support   Stephen Warren
• [PATCH v2 2/4] irqchip: bcm2835: If a parent interrupt is registered, chain from it.   Stephen Warren
• [PATCH v2 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Stephen Warren
• [PATCH 1/2] MAINTAINERS: Add myself as a bcm2835 co-maintainer.   Stephen Warren
• [PATCH] irqchip: bcm2835: Add FIQ support   Stephen Warren
• [PATCH v2 2/4] irqchip: bcm2835: If a parent interrupt is registered, chain from it.   Stephen Warren
• [PATCH v3 1/7] dt/bindings: Add binding for the Raspberry Pi clock provider   Stephen Warren
• [PATCH 07/10] usb: chipidea: usbmisc_imx: add unburst setting for imx6   Lothar Waßmann
• [PATCH 07/10] usb: chipidea: usbmisc_imx: add unburst setting for imx6   Lothar Waßmann
• [PATCH v3 1/1] Serial: imx: add dev_pm_ops to support suspend to ram/disk   Lothar Waßmann
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Michael van der Westhuizen
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Michael van der Westhuizen
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Michael van der Westhuizen
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Michael van der Westhuizen
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Michael van der Westhuizen
• [PATCH 1/2] gpio: dwapb: Use human understandable gpio numbering.   Michael van der Westhuizen
• [RESEND PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O   Michael van der Westhuizen
• [RESEND PATCH v2 1/2] dt: snps, dw-apb-ssi: Document new I/O data register width property   Michael van der Westhuizen
• [RESEND PATCH v2 2/2] spi: dw: Allow interface drivers to limit data I/O to word sizes   Michael van der Westhuizen
• [PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O   Michael van der Westhuizen
• [PATCH v4 0/5] generic TEE subsystem   Jens Wiklander
• [PATCH v4 1/5] arm/arm64: add smccc ARCH32   Jens Wiklander
• [PATCH v4 2/5] dt/bindings: add bindings for optee   Jens Wiklander
• [PATCH v4 3/5] tee: generic TEE subsystem   Jens Wiklander
• [PATCH v4 4/5] tee: add OP-TEE driver   Jens Wiklander
• [PATCH v4 5/5] Documentation: tee subsystem and op-tee driver   Jens Wiklander
• [PATCH v4 3/5] tee: generic TEE subsystem   Jens Wiklander
• [RFC Patch V1 05/12] x86, PCI: Use for_pci_msi_entry() to access MSI device list   Konrad Rzeszutek Wilk
• [RFC Patch V1 06/12] PCI: Use for_pci_msi_entry() to access MSI device list   Konrad Rzeszutek Wilk
• [PATCH v2 09/20] xen/biomerge: Don't allow biovec to be merge when Linux is not using 4KB page   Konrad Rzeszutek Wilk
• [Xen-devel] [PATCH v2 09/20] xen/biomerge: Don't allow biovec to be merge when Linux is not using 4KB page   Konrad Rzeszutek Wilk
• [PATCH v5 2/6] arch: unify ioremap prototypes and macro aliases   Dan Williams
• RFC: default ioremap_*() variant defintions   Dan Williams
• [PATCH 00/10] unify ioremap definitions and introduce memremap   Dan Williams
• [PATCH 01/10] mm, x86: Fix warning in ioremap RAM check   Dan Williams
• [PATCH 02/10] mm, x86: Remove region_is_ram() call from ioremap   Dan Williams
• [PATCH 03/10] mm: Fix bugs in region_is_ram()   Dan Williams
• [PATCH 04/10] arch, drivers: don't include <asm/io.h> directly, use <linux/io.h> instead   Dan Williams
• [PATCH 05/10] arch: unify ioremap prototypes and macro aliases   Dan Williams
• [PATCH 06/10] cleanup IORESOURCE_CACHEABLE vs ioremap()   Dan Williams
• [PATCH 07/10] devm: fix ioremap_cache() usage   Dan Williams
• [PATCH 08/10] arch: introduce strict_ioremap   Dan Williams
• [PATCH 09/10] arch: introduce memremap()   Dan Williams
• [PATCH 10/10] pmem: convert to generic memremap   Dan Williams
• [PATCH 09/10] arch: introduce memremap()   Dan Williams
• [PATCH 05/10] arch: unify ioremap prototypes and macro aliases   Dan Williams
• [PATCH 08/10] arch: introduce strict_ioremap   Dan Williams
• [PATCH 09/10] arch: introduce memremap()   Dan Williams
• [PATCH 09/10] arch: introduce memremap()   Dan Williams
• [arch] WARNING: CPU: 0 PID: 0 at kernel/memremap.c:31 memremap()   Dan Williams
• [PATCH 09/10] arch: introduce memremap()   Dan Williams
• [PATCH v2 00/25] replace ioremap_{cache|wt} with memremap   Dan Williams
• [PATCH v2 01/25] mm, x86: Fix warning in ioremap RAM check   Dan Williams
• [PATCH v2 02/25] mm, x86: Remove region_is_ram() call from ioremap   Dan Williams
• [PATCH v2 03/25] mm: Fix bugs in region_is_ram()   Dan Williams
• [PATCH v2 04/25] mm: enhance region_is_ram() to distinguish 'unknown' vs 'mixed'   Dan Williams
• [PATCH v2 05/25] arch, drivers: don't include <asm/io.h> directly, use <linux/io.h> instead   Dan Williams
• [PATCH v2 06/25] cleanup IORESOURCE_CACHEABLE vs ioremap()   Dan Williams
• [PATCH v2 07/25] intel_iommu: fix leaked ioremap mapping   Dan Williams
• [PATCH v2 08/25] arch: introduce memremap()   Dan Williams
• [PATCH v2 09/25] arm: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v2 10/25] x86: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v2 11/25] gma500: switch from acpi_os_ioremap to ioremap   Dan Williams
• [PATCH v2 12/25] i915: switch from acpi_os_ioremap to ioremap   Dan Williams
• [PATCH v2 13/25] acpi: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v2 14/25] toshiba laptop: replace ioremap_cache with ioremap   Dan Williams
• [PATCH v2 15/25] memconsole: fix __iomem mishandling, switch to memremap   Dan Williams
• [PATCH v2 16/25] visorbus: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v2 17/25] intel-iommu: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v2 18/25] libnvdimm, pmem: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v2 19/25] pxa2xx-flash: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v2 20/25] sfi: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v2 21/25] fbdev: switch from ioremap_wt to memremap   Dan Williams
• [PATCH v2 22/25] pmem: switch from ioremap_wt to memremap   Dan Williams
• [PATCH v2 23/25] arch: remove ioremap_cache, replace with arch_memremap   Dan Williams
• [PATCH v2 24/25] arch: remove ioremap_wt, replace with arch_memremap   Dan Williams
• [PATCH v2 25/25] pmem: convert to generic memremap   Dan Williams
• [PATCH v2 08/25] arch: introduce memremap()   Dan Williams
• [PATCH v2 25/25] pmem: convert to generic memremap   Dan Williams
• [PATCH v2 08/25] arch: introduce memremap()   Dan Williams
• [PATCH v2 08/25] arch: introduce memremap()   Dan Williams
• [PATCH v2 08/25] arch: introduce memremap()   Dan Williams
• [PATCH v2 18/25] libnvdimm, pmem: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v2 08/25] arch: introduce memremap()   Dan Williams
• [PATCH v2 08/25] arch: introduce memremap()   Dan Williams
• [PATCH v2 24/25] arch: remove ioremap_wt, replace with arch_memremap   Dan Williams
• [PATCH v3 00/24] replace ioremap_{cache|wt} with memremap   Dan Williams
• [PATCH v3 01/24] mm: enhance region_is_ram() to region_intersects()   Dan Williams
• [PATCH v3 02/24] arch, drivers: don't include <asm/io.h> directly, use <linux/io.h> instead   Dan Williams
• [PATCH v3 03/24] cleanup IORESOURCE_CACHEABLE vs ioremap()   Dan Williams
• [PATCH v3 04/24] intel_iommu: fix leaked ioremap mapping   Dan Williams
• [PATCH v3 05/24] arch: introduce memremap()   Dan Williams
• [PATCH v3 06/24] arm: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v3 07/24] x86: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v3 08/24] gma500: switch from acpi_os_ioremap to memremap   Dan Williams
• [PATCH v3 09/24] i915: switch from acpi_os_ioremap to memremap   Dan Williams
• [PATCH v3 10/24] acpi: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v3 11/24] toshiba laptop: replace ioremap_cache with ioremap   Dan Williams
• [PATCH v3 12/24] memconsole: fix __iomem mishandling, switch to memremap   Dan Williams
• [PATCH v3 13/24] visorbus: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v3 14/24] intel-iommu: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v3 15/24] libnvdimm, pmem: push call to ioremap_cache out of line   Dan Williams
• [PATCH v3 16/24] pxa2xx-flash: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v3 17/24] sfi: switch from ioremap_cache to memremap   Dan Williams
• [PATCH v3 18/24] fbdev: switch from ioremap_wt to memremap   Dan Williams
• [PATCH v3 19/24] pmem: switch from ioremap_wt to memremap   Dan Williams
• [PATCH v3 20/24] arch: kill ioremap_cached()   Dan Williams
• [PATCH v3 21/24] arch: kill ioremap_fullcache()   Dan Williams
• [PATCH v3 22/24] arch: remove ioremap_cache, replace with arch_memremap   Dan Williams
• [PATCH v3 23/24] arch: remove ioremap_wt, optionally replace with arch_memremap   Dan Williams
• [PATCH v3 24/24] pmem: convert to generic memremap   Dan Williams
• [PATCH v3 01/24] mm: enhance region_is_ram() to region_intersects()   Dan Williams
• [PATCH v3 01/24] mm: enhance region_is_ram() to region_intersects()   Dan Williams
• [PATCH v3 05/24] arch: introduce memremap()   Dan Williams
• [RFC v2 0/6] IRQ bypass manager and irqfd consumer   Alex Williamson
• [RFC v2 0/6] IRQ bypass manager and irqfd consumer   Alex Williamson
• [RFC v2 0/6] IRQ bypass manager and irqfd consumer   Alex Williamson
• [RFC 0/2] VFIO: Add virtual MSI doorbell support.   Alex Williamson
• [RFC 0/2] VFIO: Add virtual MSI doorbell support.   Alex Williamson
• [RFC 0/2] VFIO: Add virtual MSI doorbell support.   Alex Williamson
• [PATCH v4 1/4] iommu/iova: Avoid over-allocating when size-aligned   David Woodhouse
• [PATCH 3/4] Revert "ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688"   Woodruff, Richard
• [RFC 09/17] bypass: IRQ bypass manager proto by Alex   Wu, Feng
• [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control   Wu, Feng
• [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control   Wu, Feng
• [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control   Wu, Feng
• [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control   Wu, Feng
• [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control   Wu, Feng
• [RFC 16/17] KVM: eventfd: add irq bypass consumer management   Wu, Feng
• [RFC 16/17] KVM: eventfd: add irq bypass consumer management   Wu, Feng
• [RFC v2 6/6] KVM: eventfd: add irq bypass consumer management   Wu, Feng
• [RFC v2 6/6] KVM: eventfd: add irq bypass consumer management   Wu, Feng
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Wu, Feng
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Wu, Feng
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Wu, Feng
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Wu, Feng
• [RFC v2 3/6] irq: bypass: Extend skeleton for ARM forwarding control   Wu, Feng
• [RFC v2 0/6] IRQ bypass manager and irqfd consumer   Wu, Feng
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Josh Wu
• [PATCH 2/2] ARM: at91: sama5/dt: update rstc to correct compatible string   Josh Wu
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Josh Wu
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Josh Wu
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Josh Wu
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Josh Wu
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Josh Wu
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Josh Wu
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Josh Wu
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Josh Wu
• [PATCH 1/2] power: reset: at91: add sama5d3 reset function   Josh Wu
• [PATCH v2 1/2] power: reset: at91: add sama5d3 reset function   Josh Wu
• [PATCH v2 2/2] ARM: at91: sama5/dt: update rstc to correct compatible string   Josh Wu
• [PATCH v2 2/2] ARM: at91: at91_dt_defconfig: enable ISI and ov2640 support   Josh Wu
• [PATCH] media: atmel-isi: parse the DT parameters for vsync/hsync polarity   Josh Wu
• [PATCH v2 2/4] iommu: Implement common IOMMU ops for DMA mapping   Yong Wu
• [PATCH v2 2/4] iommu: Implement common IOMMU ops for DMA mapping   Yong Wu
• [PATCH v3 2/4] iommu: Implement common IOMMU ops for DMA mapping   Yong Wu
• [PATCH v3 0/6] MT8173 IOMMU SUPPORT   Yong Wu
• [PATCH v3 1/6] dt-bindings: iommu: Add binding for mediatek IOMMU   Yong Wu
• [PATCH v3 2/6] dt-bindings: mediatek: Add smi dts binding   Yong Wu
• [PATCH v3 3/6] iommu: add ARM short descriptor page table allocator.   Yong Wu
• [PATCH v3 4/6] memory: mediatek: Add SMI driver   Yong Wu
• [PATCH v3 5/6] iommu/mediatek: Add mt8173 IOMMU driver   Yong Wu
• [PATCH v3 6/6] dts: mt8173: Add iommu/smi nodes for mt8173   Yong Wu
• [PATCH v3 3/6] iommu: add ARM short descriptor page table allocator.   Yong Wu
• [PATCH v3 5/6] iommu/mediatek: Add mt8173 IOMMU driver   Yong Wu
• [PATCH v3 3/6] iommu: add ARM short descriptor page table allocator.   Yong Wu
• [PATCH v3 5/6] iommu/mediatek: Add mt8173 IOMMU driver   Yong Wu
• [PATCH v3 3/6] iommu: add ARM short descriptor page table allocator.   Yong Wu
• [PATCH v3 3/6] iommu: add ARM short descriptor page table allocator.   Yong Wu
• [PATCH v3 5/6] iommu/mediatek: Add mt8173 IOMMU driver   Yong Wu
• [PATCH v3 5/6] iommu/mediatek: Add mt8173 IOMMU driver   Yong Wu
• [PATCH v3 6/6] dts: mt8173: Add iommu/smi nodes for mt8173   Yong Wu
• [PATCH v3 1/3] ACPI : introduce macros for using the ACPI specification version   Rafael J. Wysocki
• [PATCH v3 1/3] ACPI : introduce macros for using the ACPI specification version   Rafael J. Wysocki
• [PATCH v3 2/3] ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro   Rafael J. Wysocki
• [PATCH v3 1/3] ACPI : introduce macros for using the ACPI specification version   Rafael J. Wysocki
• [PATCH] base: power: wakeirq: don't leak dev->power.wakeirq   Rafael J. Wysocki
• [PATCH v4 0/2] Correct for ACPI 5.1->6.0 spec changes in MADT GICC entries   Rafael J. Wysocki
• [PATCH] base: power: wakeirq: don't leak dev->power.wakeirq   Rafael J. Wysocki
• [PATCH V4] PM / Domains: Remove intermediate states from the power off sequence   Rafael J. Wysocki
• [PATCH v2 13/25] acpi: switch from ioremap_cache to memremap   Rafael J. Wysocki
• [PATCH V2 00/11] OPP: Add code to support operating-points-v2 bindings   Rafael J. Wysocki
• [PATCH v2 0/22] On-demand device probing   Rafael J. Wysocki
• crypto: marvell/CESA: Issues with non cache-line aligned buffers   Herbert Xu
• crypto: marvell/CESA: Issues with non cache-line aligned buffers   Herbert Xu
• [PATCH] crypto: arm: ignore generated SHA2 assembly files   Herbert Xu
• [PATCH v10 4/5] crypto: Add Allwinner Security System crypto accelerator   Herbert Xu
• [linux-sunxi] Re: [PATCH v10 4/5] crypto: Add Allwinner Security System crypto accelerator   Herbert Xu
• [PATCH v11] crypto: Add Allwinner Security System crypto accelerator   Herbert Xu
• [PATCH v11] crypto: Add Allwinner Security System crypto accelerator   Herbert Xu
• [PATCH v11] crypto: Add Allwinner Security System crypto accelerator   Herbert Xu
• [PATCH v1 3/4] Crypto: Add support for APM X-Gene SoC CRC32C h/w accelerator driver   Herbert Xu
• ARM: dts: sunxi: Regulators at common board layouts   Mikhail Yakshin
• [PATCH] gpio: UniPhier: add driver for UniPhier GPIO controller   Masahiro Yamada
• [PATCH v2] gpio: UniPhier: add driver for UniPhier GPIO controller   Masahiro Yamada
• [PATCH 0/3] ARM: add UART and EHCI support for UniPhier DTS and enable them.   Masahiro Yamada
• [PATCH 1/3] ARM: multi_v7_defconfig: enable UniPhier UART driver   Masahiro Yamada
• [PATCH 2/3] ARM: dts: UniPhier: add on-chip UART device nodes   Masahiro Yamada
• [PATCH 3/3] ARM: dts: UniPhier: add USB EHCI device nodes   Masahiro Yamada
• [PATCH 0/7] This series adds pinctrl drivers for UniPhier SoC family.   Masahiro Yamada
• [PATCH 1/7] pinctrl: UniPhier: add UniPhier pinctrl core support   Masahiro Yamada
• [PATCH 2/7] pinctrl: UniPhier: add UniPhier PH1-LD4 pinctrl driver   Masahiro Yamada
• [PATCH 3/7] pinctrl: UniPhier: add UniPhier PH1-Pro4 pinctrl driver   Masahiro Yamada
• [PATCH 4/7] pinctrl: UniPhier: add UniPhier PH1-sLD8 pinctrl driver   Masahiro Yamada
• [PATCH 5/7] pinctrl: UniPhier: add UniPhier PH1-Pro5 pinctrl driver   Masahiro Yamada
• [PATCH 6/7] pinctrl: UniPhier: add UniPhier ProXstream2 pinctrl driver   Masahiro Yamada
• [PATCH 7/7] pinctrl: UniPhier: add UniPhier PH1-LD6b pinctrl driver   Masahiro Yamada
• [PATCH] ARM: add boot image dependencies not to generate invalid images   Masahiro Yamada
• [PATCH 3/3] ARM: dts: UniPhier: add USB EHCI device nodes   Masahiro Yamada
• [PATCH 1/7] pinctrl: UniPhier: add UniPhier pinctrl core support   Masahiro Yamada
• [PATCH 1/7] pinctrl: UniPhier: add UniPhier pinctrl core support   Masahiro Yamada
• [PATCH v2 0/3] ARM: add UART and EHCI support for UniPhier DTS and enable them.   Masahiro Yamada
• [PATCH v2 1/3] ARM: multi_v7_defconfig: enable UniPhier UART driver   Masahiro Yamada
• [PATCH v2 2/3] ARM: dts: UniPhier: add on-chip UART device nodes   Masahiro Yamada
• [PATCH v2 3/3] ARM: dts: UniPhier: add USB EHCI device nodes   Masahiro Yamada
• [PATCH] ARM: add boot image dependencies not to generate invalid images   Masahiro Yamada
• [PATCH v2 0/7] This series adds pinctrl drivers for UniPhier SoC family.   Masahiro Yamada
• [PATCH v2 1/7] pinctrl: UniPhier: add UniPhier pinctrl core support   Masahiro Yamada
• [PATCH v2 2/7] pinctrl: UniPhier: add UniPhier PH1-LD4 pinctrl driver   Masahiro Yamada
• [PATCH v2 3/7] pinctrl: UniPhier: add UniPhier PH1-Pro4 pinctrl driver   Masahiro Yamada
• [PATCH v2 4/7] pinctrl: UniPhier: add UniPhier PH1-sLD8 pinctrl driver   Masahiro Yamada
• [PATCH v2 5/7] pinctrl: UniPhier: add UniPhier PH1-Pro5 pinctrl driver   Masahiro Yamada
• [PATCH v2 6/7] pinctrl: UniPhier: add UniPhier ProXstream2 pinctrl driver   Masahiro Yamada
• [PATCH v2 7/7] pinctrl: UniPhier: add UniPhier PH1-LD6b pinctrl driver   Masahiro Yamada
• [PATCH v3] gpio: UniPhier: add driver for UniPhier GPIO controller   Masahiro Yamada
• [PATCH v3] gpio: UniPhier: add driver for UniPhier GPIO controller   Masahiro Yamada
• [PATCH v3] gpio: UniPhier: add driver for UniPhier GPIO controller   Masahiro Yamada
• [PATCH v3] gpio: UniPhier: add driver for UniPhier GPIO controller   Masahiro Yamada
• [PATCH v2 1/7] pinctrl: UniPhier: add UniPhier pinctrl core support   Masahiro Yamada
• [PATCH] ARM: refactor bitops functions with BIT_MASK() and BIT_WORD()   Masahiro Yamada
• [PATCH] ARM: add boot image dependencies not to generate invalid images   Masahiro Yamada
• [PATCH] i2c: cadence: set THIS_MODULE to the owner of the adapter   Masahiro Yamada
• [PATCH] serial: 8250_uniphier: call clk_disable_unprepare() on failure path   Masahiro Yamada
• [PATCH 0/3] ARM: UniPhier: update DTS and MAINTAINERS   Masahiro Yamada
• [PATCH 1/3] ARM: dts: UniPhier: add pinctrl device nodes   Masahiro Yamada
• [PATCH 2/3] ARM: dts: UniPhier: add UART and USB pinmux nodes   Masahiro Yamada
• [PATCH] clk: zynq: remove redundant $(CONFIG_ARCH_ZYNQ) in Makefile   Masahiro Yamada
• [PATCH v2] dtb: Create a common home for cross-architecture dtsi files.   Masahiro Yamada
• [PATCH v2] dtb: Create a common home for cross-architecture dtsi files.   Masahiro Yamada
• [PATCH 0/3] i2c: uniphier: add two I2C controller drivers for UniPhier SoC platform   Masahiro Yamada
• [PATCH 1/3] i2c: uniphier: add UniPhier FIFO-less I2C driver   Masahiro Yamada
• [PATCH 2/3] i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver   Masahiro Yamada
• [PATCH 3/3] i2c: uniphier: add bindings for UniPhier I2C controllers   Masahiro Yamada
• [PATCH v2] dtb: Create a common home for cross-architecture dtsi files.   Masahiro Yamada
• [PATCH] soc: tegra: remove redundant $(CONFIG_ARCH_TEGRA) in Makefile   Masahiro Yamada
• [PATCH] pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting   Masahiro Yamada
• [PATCH v3] dtb: Create a common home for cross-architecture dtsi files.   Masahiro Yamada
• [PATCH v3] dtb: Create a common home for cross-architecture dtsi files.   Masahiro Yamada
• [PATCH] drivers/rtc/rtc-pl031.c: reset registers in init flow   Leo Yan
• [PATCH] drivers/rtc/rtc-pl031.c: fix typo for author email   Leo Yan
• [rtc-linux] [PATCH] drivers/rtc/rtc-pl031.c: reset registers in init flow   Leo Yan
• [PATCH 0/2] watchdog: at91sam9_wdt: add new feature support   Wenyou Yang
• [PATCH 1/2] drivers: watchdog: at91sam9_wdt: add new feature support   Wenyou Yang
• [PATCH 2/2] Documentation: dt: binding: atmel-wdt: add a new compitable   Wenyou Yang
• [PATCH 1/2] drivers: watchdog: at91sam9_wdt: add new feature support   Yang, Wenyou
• [PATCH 1/2] drivers: watchdog: at91sam9_wdt: add new feature support   Yang, Wenyou
• [PATCH] drm/rockchip: vop: remove hardware cursor window   Mark Yao
• [PATCH v3 0/6] drm/rockchip: fixes and new features   Mark Yao
• [PATCH v3 1/6] drm/rockchip: vop: Fix virtual stride calculation   Mark Yao
• [PATCH v3 2/6] drm/rockchip: vop: Fix window dest start point   Mark Yao
• [PATCH v3 3/6] drm/rockchip: vop: Add yuv plane support   Mark Yao
• [PATCH v3 4/6] drm/rockchip: vop: Default enable win2/3 area0 bit   Mark Yao
• [PATCH v3 5/6] drm/rockchip: vop: restore vop registers when resume   Mark Yao
• [PATCH v3 6/6] drm/rockchip: vop: support plane scale   Mark Yao
• [PATCH v4 3/6] drm/rockchip: vop: Add yuv plane support   Mark Yao
• [PATCH v4 4/6] drm/rockchip: vop: Default enable win2/3 area0 bit   Mark Yao
• [PATCH v4 5/6] drm/rockchip: vop: restore vop registers when resume   Mark Yao
• [PATCH v4 6/6] drm/rockchip: vop: support plane scale   Mark Yao
• No subject   Yuan Yao
• [PATCH] dmaengine: fsl-edma: add PM suspend/resume support   Yuan Yao
• [PATCH v2] dmaengine: fsl-edma: add PM suspend/resume support   Yuan Yao
• [1/2] RTC: Add core rtc support for Gemini Soc devices   Roman Yeryomin
• Gemini Soc timers   Roman Yeryomin
• [1/2] RTC: Add core rtc support for Gemini Soc devices   Roman Yeryomin
• [RFC] arm64: defconfig: enable 48-bit VA by default   Stuart Yoder
• [RFC] arm64: defconfig: enable 48-bit VA by default   Stuart Yoder
• bug in identity map for 4KB pages?   Stuart Yoder
• bug in identity map for 4KB pages?   Stuart Yoder
• bug in identity map for 4KB pages?   Stuart Yoder
• bug in identity map for 4KB pages?   Stuart Yoder
• bug in identity map for 4KB pages?   Stuart Yoder
• [RFC] arm64: defconfig: enable 48-bit VA by default   Stuart Yoder
• [RFC] arm64: defconfig: enable 48-bit VA by default   Stuart Yoder
• [RFC] arm64: defconfig: enable 48-bit VA by default   Stuart Yoder
• [RFC] arm64: defconfig: enable 48-bit VA by default   Stuart Yoder
• [RFC] arm64: defconfig: enable 48-bit VA by default   Stuart Yoder
• [PATCH 2/2] dmaengine: fsl-edma: add PM suspend/resume support   Yao Yuan
• [PATCH 2/2] dmaengine: fsl-edma: add PM suspend/resume support   Yao Yuan
• [PATCH] dmaengine: fsl-edma: add PM suspend/resume support   Yao Yuan
• [PATCH] dmaengine: fsl-edma: add PM suspend/resume support   Yao Yuan
• [PATCH] dmaengine: fsl-edma: add PM suspend/resume support   Yao Yuan
• [PATCH v2 0/5] Mediatek xHCI support   Chunfeng Yun
• [PATCH v2 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs   Chunfeng Yun
• [PATCH v2 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller   Chunfeng Yun
• [PATCH v2 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs   Chunfeng Yun
• [PATCH v2 4/5] xhci: mediatek: support MTK xHCI host controller   Chunfeng Yun
• [PATCH v2 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173   Chunfeng Yun
• No subject   Chunfeng Yun
• [PATCH v3 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs   Chunfeng Yun
• [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller   Chunfeng Yun
• [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs   Chunfeng Yun
• [PATCH v3 4/5] xhci: mediatek: support MTK xHCI host controller   Chunfeng Yun
• [PATCH v3 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173   Chunfeng Yun
• Mediatek xHCI support   Chunfeng Yun
• [PATCH v4 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs   Chunfeng Yun
• [PATCH v4 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller   Chunfeng Yun
• [PATCH v4 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs   Chunfeng Yun
• [PATCH v4 4/5] xhci: mediatek: support MTK xHCI host controller   Chunfeng Yun
• [PATCH v4 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173   Chunfeng Yun
• [PATCH v4 2/7] mm: kasan: introduce generic kasan_populate_zero_shadow()   Yury
• [PATCH] lib: Make _find_next_bit helper function inline   Yury
• [PATCH] lib: Make _find_next_bit helper function inline   Yury
• [PATCH] ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set   Philipp Zabel
• [PATCH v7 1/9] nvmem: Add a simple NVMEM framework for nvmem providers   Philipp Zabel
• [PATCH V3 01/19] reset: add of_reset_control_get_by_index()   Philipp Zabel
• [PATCH v3] serial: mxs-auart: keep the AUART unit in reset state when not in use   Philipp Zabel
• [RFC 1/3] docs: dts: Added documentation for Xilinx Zynq PL Reset bindings.   Philipp Zabel
• [RFCv2 1/3] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.   Philipp Zabel
• [RFCv2 3/3] reset: reset-zynq: Adding support for Xilinx Zynq reset controller.   Philipp Zabel
• [RFCv2 1/3] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.   Philipp Zabel
• [PATCH 00/10] i2c/drm: fix i2c adapter device driver user counter   Vladimir Zapolskiy
• [PATCH 01/10] i2c: add and export of_get_i2c_adapter_by_node() interface   Vladimir Zapolskiy
• [PATCH 02/10] drm: dw_hdmi: use of_get_i2c_adapter_by_node interface   Vladimir Zapolskiy
• [PATCH 03/10] drm: exynos_hdmi: use of_get_i2c_adapter_by_node interface   Vladimir Zapolskiy
• [PATCH 04/10] drm: imx-tve: use of_get_i2c_adapter_by_node interface   Vladimir Zapolskiy
• [PATCH 05/10] drm: panel-simple: use of_get_i2c_adapter_by_node interface   Vladimir Zapolskiy
• [PATCH 06/10] drm: sti_hdmi: use of_get_i2c_adapter_by_node interface   Vladimir Zapolskiy
• [PATCH 07/10] drm: tegra: use of_get_i2c_adapter_by_node interface   Vladimir Zapolskiy
• [PATCH 08/10] drm: tilcdc: use of_get_i2c_adapter_by_node interface   Vladimir Zapolskiy
• [PATCH 09/10] fbdev: omap2: connector-dvi: use of_get_i2c_adapter_by_node interface   Vladimir Zapolskiy
• [PATCH 10/10] i2c: i2c-arb-gpio-challenge: use of_get_i2c_adapter_by_node interface   Vladimir Zapolskiy
• [PATCH 01/10] i2c: add and export of_get_i2c_adapter_by_node() interface   Vladimir Zapolskiy
• [PATCH v2 1/2] genalloc: add name arg to gen_pool_get() and devm_gen_pool_create()   Vladimir Zapolskiy
• [PATCH 0/8] misc: remove boundary checks from bin attr users   Vladimir Zapolskiy
• [PATCH 8/8] misc: eeprom: sunxi_sid: clean up sid_read()   Vladimir Zapolskiy
• [PATCH] ARM: EXYNOS: pd: fix resource deallocation on error path   Vladimir Zapolskiy
• [PATCH] ARM: EXYNOS: pd: fix resource deallocation on error path   Vladimir Zapolskiy
• [PATCH] ARM: EXYNOS: pd: fix resource deallocation on error path   Vladimir Zapolskiy
• [PATCH v2 0/2] pd: fix resource deallocation on error path   Vladimir Zapolskiy
• [PATCH v2 1/2] ARM: EXYNOS: pd: fix potentian kfree() of ro memory   Vladimir Zapolskiy
• [PATCH v2 2/2] ARM: EXYNOS: fix double of_node_put() on error path   Vladimir Zapolskiy
• [PATCH 0/5] coresight: Support context-ID tracing when PID namespace is enabled   Chunyan Zhang
• [PATCH 1/5] coresight-etm3x: Change the name of the ctxid_val to ctxid_pid   Chunyan Zhang
• [PATCH 2/5] coresight-etm4x: Change the name of the ctxid_val to ctxid_pid   Chunyan Zhang
• [PATCH 3/5] Coresight: Add an interface for supporting ETM3/4 Context ID tracing   Chunyan Zhang
• [PATCH 4/5] coresight-etm3x: Support context-ID tracing when PID namespace is enabled   Chunyan Zhang
• [PATCH 5/5] coresight-etm4x: Support context-ID tracing when PID namespace is enabled   Chunyan Zhang
• [PATCH] arm64: dts: sprd: adding ETM entries to Spreadtrum SC9836   Chunyan Zhang
• [PATCH] coresight: Fix implicit inclusion of linux/sched.h   Chunyan Zhang
• [PATCH] arm64: cpuidle: add __init section marker to arm_cpuidle_init   Jisheng Zhang
• [PATCH v2] arm64: cpuidle: add __init section marker to arm_cpuidle_init   Jisheng Zhang
• [PATCH] arm64: cpuidle: add __init section marker to arm_cpuidle_init   Jisheng Zhang
• [RFC] arm: psci: implement cpuidle_ops   Jisheng Zhang
• [PATCH v2] arm64: cpuidle: add __init section marker to arm_cpuidle_init   Jisheng Zhang
• [RFC] arm: psci: implement cpuidle_ops   Jisheng Zhang
• [RFC] arm: psci: implement cpuidle_ops   Jisheng Zhang
• [PATCH] clocksource: dw_apb_timer: add dynamic irq flag to the timer   Jisheng Zhang
• [PATCH 0/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Jisheng Zhang
• [PATCH 1/2] irqchip: dw-apb-ictl: add private data structure   Jisheng Zhang
• [PATCH 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Jisheng Zhang
• [PATCH] clocksource: dw_apb_timer: add dynamic irq flag to the timer   Jisheng Zhang
• [PATCH v2] clocksource: dw_apb_timer: add dynamic irq flag to the timer   Jisheng Zhang
• [PATCH v2 0/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Jisheng Zhang
• [PATCH v2 1/2] irqchip: dw-apb-ictl: add private data structure   Jisheng Zhang
• [PATCH v2 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Jisheng Zhang
• [PATCH v2 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Jisheng Zhang
• [PATCH v2 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Jisheng Zhang
• [PATCH v2 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Jisheng Zhang
• [PATCH v2 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Jisheng Zhang
• [RFC PATCH 0/3] arm: psci: implement cpuidle_ops   Jisheng Zhang
• [RFC PATCH 1/3] arm: psci: rename psci_smp.c to psci.c   Jisheng Zhang
• [RFC PATCH 2/3] arm: psci: enable PSCI on UP systems   Jisheng Zhang
• [RFC PATCH 3/3] arm: psci: add cpuidle_ops support   Jisheng Zhang
• [PATCH v2 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Jisheng Zhang
• [PATCH v3 0/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Jisheng Zhang
• [PATCH v3 1/2] irqchip: dw-apb-ictl: add private data structure   Jisheng Zhang
• [PATCH v3 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Jisheng Zhang
• [RFC PATCH 1/3] arm: psci: rename psci_smp.c to psci.c   Jisheng Zhang
• [PATCH 0/2] arm: dts: berlin: use stdout-path   Jisheng Zhang
• [PATCH 1/2] arm: dts: berlin: add aliases for serial   Jisheng Zhang
• [PATCH 2/2] arm: dts: berlin: use stdout-path   Jisheng Zhang
• [PATCH v3 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Jisheng Zhang
• [PATCH v3 2/2] irqchip: dw-apb-ictl: add irq_set_affinity support   Jisheng Zhang
• [PATCH 0/2] arm: berlin: add cpu hotplug support   Jisheng Zhang
• [PATCH 1/2] arm: berlin: use non-self-cleared reset register to reset cpu   Jisheng Zhang
• [PATCH 2/2] arm: berlin: add CPU hotplug support   Jisheng Zhang
• [PATCH 0/2] arm: berlin: add cpu hotplug support   Jisheng Zhang
• [RFC PATCH 3/3] arm: psci: add cpuidle_ops support   Jisheng Zhang
• [PATCH 0/4] arm: psci: implement cpuidle_ops   Jisheng Zhang
• [PATCH 1/4] arm: psci: rename psci_smp.c to psci.c   Jisheng Zhang
• [PATCH 2/4] arm: psci: enable PSCI on UP systems   Jisheng Zhang
• [PATCH 3/4] firmware: psci: move cpu_suspend handling to generic code   Jisheng Zhang
• [PATCH 4/4] arm: psci: add cpuidle_ops support   Jisheng Zhang
• [PATCH 4/4] arm: psci: add cpuidle_ops support   Jisheng Zhang
• [PATCH 4/4] arm: psci: add cpuidle_ops support   Jisheng Zhang
• [PATCH v2 0/2] arm: kernel: implement cpuidle_ops with psci backend   Jisheng Zhang
• [PATCH v2 1/2] firmware: psci: move cpu_suspend handling to generic code   Jisheng Zhang
• [PATCH v2 2/2] arm: kernel: implement cpuidle_ops with psci backend   Jisheng Zhang
• [PATCH] ARM: socfpga: put back v7_invalidate_l1 in socfpga_secondary_startup   Jisheng Zhang
• [PATCH v2 2/2] arm: kernel: implement cpuidle_ops with psci backend   Jisheng Zhang
• [PATCH] ARM: socfpga: put back v7_invalidate_l1 in socfpga_secondary_startup   Jisheng Zhang
• [PATCH v3 0/3] arm: kernel: implement cpuidle_ops with psci backend   Jisheng Zhang
• [PATCH v3 1/3] firmware: psci: move cpu_suspend handling to generic code   Jisheng Zhang
• [PATCH v3 2/3] ARM: cpuidle: refine cpuidle_ops member's parameters.   Jisheng Zhang
• [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend   Jisheng Zhang
• [PATCH v3 2/3] ARM: cpuidle: refine cpuidle_ops member's parameters.   Jisheng Zhang
• [PATCH v2 3/3] drivers: firmware: psci: add system suspend support   Jisheng Zhang
• [PATCH v2 3/3] drivers: firmware: psci: add system suspend support   Jisheng Zhang
• [PATCH v2 3/3] drivers: firmware: psci: add system suspend support   Jisheng Zhang
• [PATCH v2 3/3] drivers: firmware: psci: add system suspend support   Jisheng Zhang
• [PATCH 0/2] arm64: Add basic support for Marvell Berlin4CT SoC   Jisheng Zhang
• [PATCH 1/2] arm64: dts: Add dts files for Marvell Berlin4CT SoC   Jisheng Zhang
• [PATCH 2/2] arm64: Enable Marvell Berlin SoC family in Kconfig and defconfig   Jisheng Zhang
• [PATCH 0/3] arm64: remove paragraph about writing to FSF   Jisheng Zhang
• [PATCH 1/3] arm64: hugetlb: remove paragraph about writing to FSF   Jisheng Zhang
• [PATCH 2/3] arm64: dts: cavium: remove paragraph about writing to FSF   Jisheng Zhang
• [PATCH 3/3] arm64: dts: freescale: remove paragraph about writing to FSF   Jisheng Zhang
• [PATCH 1/2] arm64: dts: Add dts files for Marvell Berlin4CT SoC   Jisheng Zhang
• [PATCH v2 0/2] arm64: Add basic support for Marvell Berlin4CT SoC   Jisheng Zhang
• [PATCH v2 1/2] arm64: dts: Add dts files for Marvell Berlin4CT SoC   Jisheng Zhang
• [PATCH v2 2/2] arm64: Enable Marvell Berlin SoC family in Kconfig and defconfig   Jisheng Zhang
• [PATCH v2 1/2] arm64: dts: Add dts files for Marvell Berlin4CT SoC   Jisheng Zhang
• [PATCH v3 0/2] arm64: Add basic support for Marvell Berlin4CT SoC   Jisheng Zhang
• [PATCH v3 1/2] arm64: dts: Add dts files for Marvell Berlin4CT SoC   Jisheng Zhang
• [PATCH v3 2/2] arm64: Enable Marvell Berlin SoC family in Kconfig and defconfig   Jisheng Zhang
• [PATCH v3 1/2] arm64: dts: Add dts files for Marvell Berlin4CT SoC   Jisheng Zhang
• [PATCH v4 0/2] arm64: Add basic support for Marvell Berlin4CT SoC   Jisheng Zhang
• [PATCH v4 1/2] arm64: dts: Add dts files for Marvell Berlin4CT SoC   Jisheng Zhang
• [PATCH v4 2/2] arm64: Enable Marvell Berlin SoC family in Kconfig and defconfig   Jisheng Zhang
• [PATCH v4 2/2] arm64: Enable Marvell Berlin SoC family in Kconfig and defconfig   Jisheng Zhang
• [PATCH v4 1/2] arm64: dts: Add dts files for Marvell Berlin4CT SoC   Jisheng Zhang
• [PATCH v5 0/2] arm64: Add basic support for Marvell Berlin4CT SoC   Jisheng Zhang
• [PATCH v5 1/2] arm64: dts: Add dts files for Marvell Berlin4CT SoC   Jisheng Zhang
• [PATCH v5 2/2] arm64: Enable Marvell Berlin SoC family in Kconfig and defconfig   Jisheng Zhang
• [PATCH v5 0/2] arm64: Add basic support for Marvell Berlin4CT SoC   Jisheng Zhang
• [PATCH v2 1/5] pwm: add the Berlin pwm controller driver   Jisheng Zhang
• [PATCH 2/3] ARM: berlin: register cpufreq-dt for the BG2Q   Jisheng Zhang
• [PATCH v2] thermal: consistently use int for temperatures   Zhang, Rui
• [PATCH v2] thermal: consistently use int for temperatures   Zhang, Rui
• [PATCH 02/18] KVM: ARM64: Add initial support for PMU   Shannon Zhao
• [PATCH 03/18] KVM: ARM64: Add offset defines for PMU registers   Shannon Zhao
• [PATCH 04/18] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register   Shannon Zhao
• [PATCH 02/18] KVM: ARM64: Add initial support for PMU   Shannon Zhao
• [PATCH 03/18] KVM: ARM64: Add offset defines for PMU registers   Shannon Zhao
• [PATCH 04/18] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register   Shannon Zhao
• [PATCH 07/18] KVM: ARM64: PMU: Add perf event map and introduce perf event creating function   Shannon Zhao
• [PATCH v2 0/3] Add the efuse driver on rockchip platform   Shunqian Zheng
• [PATCH 0/2] Add codec machine driver for rockchip platform   Xing Zheng
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Xing Zheng
• [PATCH 2/2] ASoC: rockchip: Add machine driver for rt5645/rt5650 codec   Xing Zheng
• [PATCH v2 0/2] Add codec machine driver for rockchip platform   Xing Zheng
• [PATCH v2 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Xing Zheng
• [PATCH v2 2/2] ASoC: rockchip: Add machine driver for rt5645/rt5650 codec   Xing Zheng
• [PATCH v3 0/2] Add codec machine driver for rockchip platform   Xing Zheng
• [PATCH v3 1/2] ASoC: rockchip: Add machine driver for max98090 codec   Xing Zheng
• [PATCH v3 2/2] ASoC: rockchip: Add machine driver for rt5645/rt5650 codec   Xing Zheng
• [PATCH 1/2] ARM: rockchip: set correct stabilization thresholds in suspend   Chris Zhong
• [PATCH v2 1/2] ARM: rockchip: set correct stabilization thresholds in suspend   Chris Zhong
• [PATCH 2/9] locking/qrwlock: avoid redundant atomic_add_return on read_lock_slowpath   Peter Zijlstra
• [PATCH 2/9] locking/qrwlock: avoid redundant atomic_add_return on read_lock_slowpath   Peter Zijlstra
• [PATCH 4/9] locking/qrwlock: implement queue_write_unlock using smp_store_release   Peter Zijlstra
• [PATCH 5/9] locking/qrwlock: remove redundant cmpxchg barriers on writer slow-path   Peter Zijlstra
• [PATCH 6/9] locking/qrwlock: allow architectures to hook in to contended paths   Peter Zijlstra
• Build failure on ARM64 for Linux 4.2-rc1 was: Linux 4.2-rc1   Peter Zijlstra
• [PATCH 13/18] arm64: cmpxchg: avoid memory barrier on comparison failure   Peter Zijlstra
• [PATCH 13/18] arm64: cmpxchg: avoid memory barrier on comparison failure   Peter Zijlstra
• [PATCH 13/18] arm64: cmpxchg: avoid memory barrier on comparison failure   Peter Zijlstra
• [PATCH v2 02/20] documentation: Clarify failed cmpxchg memory ordering semantics   Peter Zijlstra
• [RFC] arm64:change jump_label to use branch instruction, not use NOP instr   Peter Zijlstra
• [RFC] arm64:change jump_label to use branch instruction, not use NOP instr   Peter Zijlstra
• [PATCH v3 0/4] cpufreq: use generic cpufreq drivers for Exynos5250 platform   Bartlomiej Zolnierkiewicz
• [PATCH v3 1/4] clk: samsung: exynos5250: add cpu clock configuration data and instantiate cpu clock   Bartlomiej Zolnierkiewicz
• [PATCH v3 2/4] ARM: dts: Exynos5250: add CPU OPP and regulator supply property   Bartlomiej Zolnierkiewicz
• [PATCH v3 3/4] ARM: Exynos: switch to using generic cpufreq driver for Exynos5250   Bartlomiej Zolnierkiewicz
• [PATCH v3 4/4] cpufreq: exynos: remove Exynos5250 specific cpufreq driver support   Bartlomiej Zolnierkiewicz
• [PATCH v2 4/4] cpufreq: exynos: remove Exynos5250 specific cpufreq driver support   Bartlomiej Zolnierkiewicz
• [PATCHv3] clk samsung exynos5420 add CLK_RECALC_NEW_RATES flag to mout_apll and mout_kpll clock.   Bartlomiej Zolnierkiewicz
• [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250   Bartlomiej Zolnierkiewicz
• [PATCH 05/10] opp: Add support to parse "operating-points-v2" bindings   Bartlomiej Zolnierkiewicz
• [PATCH v2 0/7] cpufreq: use generic cpufreq drivers for Exynos4x12 platform   Bartlomiej Zolnierkiewicz
• [PATCH v2 1/7] opp: add dev_pm_opp_get_turbo_mode_setting() helper   Bartlomiej Zolnierkiewicz
• [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes   Bartlomiej Zolnierkiewicz
• [PATCH v2 3/7] cpufreq-dt: add turbo modes support   Bartlomiej Zolnierkiewicz
• [PATCH v2 4/7] clk: samsung: exynos4x12: add cpu clock configuration data and instantiate cpu clock   Bartlomiej Zolnierkiewicz
• [PATCH v2 5/7] ARM: dts: Exynos4x12: add CPU OPP and regulator supply property   Bartlomiej Zolnierkiewicz
• [PATCH v2 6/7] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12   Bartlomiej Zolnierkiewicz
• [PATCH v2 7/7] cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support   Bartlomiej Zolnierkiewicz
• [PATCH 10/10] cpufreq-dt: Add support for operating-points-v2 bindings   Bartlomiej Zolnierkiewicz
• [PATCH 10/10] cpufreq-dt: Add support for operating-points-v2 bindings   Bartlomiej Zolnierkiewicz
• [PATCH 4/6] ARM: dts: Exynos4210: add CPU OPP and regulator supply property   Bartlomiej Zolnierkiewicz
• [PATCH 4/6] ARM: dts: Exynos4210: add CPU OPP and regulator supply property   Bartlomiej Zolnierkiewicz
• [PATCH 4/6] ARM: dts: Exynos4210: add CPU OPP and regulator supply property   Bartlomiej Zolnierkiewicz
• [GIT PULL] Non-critical fixes for v4.3   Bartlomiej Zolnierkiewicz
• [PATCH 01/10] opp: Relocate few routines   Bartlomiej Zolnierkiewicz
• [PATCH 02/10] OPP: Create _remove_device_opp() for freeing dev_opp   Bartlomiej Zolnierkiewicz
• [PATCH 03/10] OPP: Allocate dev_opp from _add_device_opp()   Bartlomiej Zolnierkiewicz
• [PATCH 04/10] OPP: Break _opp_add_dynamic() into smaller functions   Bartlomiej Zolnierkiewicz
• [PATCH 05/10] opp: Add support to parse "operating-points-v2" bindings   Bartlomiej Zolnierkiewicz
• [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes   Bartlomiej Zolnierkiewicz
• [PATCH v2 3/7] cpufreq-dt: add turbo modes support   Bartlomiej Zolnierkiewicz
• [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes   Bartlomiej Zolnierkiewicz
• [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes   Bartlomiej Zolnierkiewicz
• [PATCH v2 3/7] cpufreq-dt: add turbo modes support   Bartlomiej Zolnierkiewicz
• [PATCH V2 06/11] opp: Add support to parse "operating-points-v2" bindings   Bartlomiej Zolnierkiewicz
• [PATCH V2 07/11] OPP: Add clock-latency-ns support   Bartlomiej Zolnierkiewicz
• [PATCH V2 08/11] opp: Add OPP sharing information to OPP library   Bartlomiej Zolnierkiewicz
• [PATCH V2 09/11] OPP: Add support for opp-suspend   Bartlomiej Zolnierkiewicz
• [PATCH V2 10/11] opp: Add helpers for initializing CPU OPPs   Bartlomiej Zolnierkiewicz
• [PATCH V2 11/11] cpufreq-dt: Add support for operating-points-v2 bindings   Bartlomiej Zolnierkiewicz
• [PATCH v3 0/5] cpufreq: use generic cpufreq drivers for Exynos4x12 platform   Bartlomiej Zolnierkiewicz
• [PATCH v3 1/5] clk: samsung: exynos4x12: add cpu clock configuration data and instantiate cpu clock   Bartlomiej Zolnierkiewicz
• [PATCH v3 2/5] ARM: dts: Exynos4x12: add CPU OPP and regulator supply property   Bartlomiej Zolnierkiewicz
• [PATCH v3 3/5] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12   Bartlomiej Zolnierkiewicz
• [PATCH v3 4/5] cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support   Bartlomiej Zolnierkiewicz
• [PATCH v3 5/5] cpufreq: remove no longer needed CPU_FREQ_BOOST_SW config option   Bartlomiej Zolnierkiewicz
• [PATCH V3 00/16] OPP: Add code to support operating-points-v2 bindings   Bartlomiej Zolnierkiewicz
• [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes   Bartlomiej Zolnierkiewicz
• [PATCH 16/18] ARM/w90x900/time: Migrate to new 'set-state' interface   Wan ZongShun
• [PATCH v2 18/25] libnvdimm, pmem: switch from ioremap_cache to memremap   Ross Zwisler
• [PATCH v2 22/25] pmem: switch from ioremap_wt to memremap   Ross Zwisler
• Regular oops on shutdown of KVM/ARM64 machines with VGA device   Marc Zyngier
• [PATCH 10/10] KVM: arm/arm64: vgic: Allow non-shared device HW interrupts   Marc Zyngier
• [PATCH 05/10] KVM: arm/arm64: vgic: Relax vgic_can_sample_irq for edge IRQs   Marc Zyngier
• [PATCH 06/10] KVM: arm/arm64: vgic: Allow dynamic mapping of physical/virtual interrupts   Marc Zyngier
• [PATCH 2/2] arm/arm64: KVM: fix two build failured under STRICT_MM_TYPECHECKS   Marc Zyngier
• [PATCH] arm64: Don't report clear pmds and puds as huge   Marc Zyngier
• [PATCH 4/4] irqchip, gicv3-its: Implement Cavium ThunderX errata 22375, 24313   Marc Zyngier
• [PATCH 05/10] KVM: arm/arm64: vgic: Relax vgic_can_sample_irq for edge IRQs   Marc Zyngier
• [PATCH] arm64/kvm: Add generic v8 KVM target   Marc Zyngier
• [PATCH] arm64/kvm: Add generic v8 KVM target   Marc Zyngier
• [PATCH 05/10] KVM: arm/arm64: vgic: Relax vgic_can_sample_irq for edge IRQs   Marc Zyngier
• [PATCH] arm64/kvm: Add generic v8 KVM target   Marc Zyngier
• [RFC 08/17] kvm: arm/arm64: implement kvm_arm_[halt, resume]_guest   Marc Zyngier
• [PATCH 3/4] irqchip, gicv3: Implement Cavium ThunderX erratum 23154   Marc Zyngier
• [PATCH 1/4] irqchip, gicv3-its: Read typer register outside the loop   Marc Zyngier
• [PATCH v5 1/2] arm64: kvm: allows kvm cpu hotplug   Marc Zyngier
• [PATCH v5 1/2] arm64: kvm: allows kvm cpu hotplug   Marc Zyngier
• [PATCH v3 00/15] Introducing per-device MSI domain   Marc Zyngier
• [PATCH v3 01/15] genirq: irqdomain: Allow irq domain aliasing   Marc Zyngier
• [PATCH v3 02/15] PCI: MSI: Register irq domain with specific token   Marc Zyngier
• [PATCH v3 03/15] device core: Introduce per-device MSI domain pointer   Marc Zyngier
• [PATCH v3 04/15] PCI/MSI: Add hooks to populate the msi_domain field   Marc Zyngier
• [PATCH v3 05/15] PCI/MSI: of: Add support for OF-provided msi_domain   Marc Zyngier
• [PATCH v3 06/15] PCI/MSI: of: Allow msi_domain lookup using the host bridge node   Marc Zyngier
• [PATCH v3 07/15] PCI/MSI: Let pci_msi_get_domain use struct device's msi_domain   Marc Zyngier
• [PATCH v3 08/15] platform: of: Assign MSI domain to platform device   Marc Zyngier
• [PATCH v3 09/15] irqchip: gicv3-its: Split PCI/MSI code from the core ITS driver   Marc Zyngier
• [PATCH v3 10/15] irqchip: gicv3-its: Register irq domain with platform MSI token   Marc Zyngier
• [PATCH v3 11/15] irqchip: GICv2m: Get rid of struct msi_controller   Marc Zyngier
• [PATCH v3 12/15] irqchip: gicv3-its: Get rid of struct msi_controller   Marc Zyngier
• [PATCH v3 13/15] irqchip: gicv3-its: Make the PCI/MSI code standalone   Marc Zyngier
• [PATCH v3 14/15] PCI/MSI: pci-xgene-msi: Get rid of struct msi_controller   Marc Zyngier
• [PATCH v3 15/15] PCI/MSI: Drop domain field from msi_controller   Marc Zyngier
• [PATCH 3/4] irqchip, gicv3: Implement Cavium ThunderX erratum 23154   Marc Zyngier
• [PATCH v3 09/15] irqchip: gicv3-its: Split PCI/MSI code from the core ITS driver   Marc Zyngier
• [PATCH v3 3/3] dt-binding:Documents the mbigen bindings   Marc Zyngier
• [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller   Marc Zyngier
• [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller   Marc Zyngier
• [RFC PATCH] KVM: arm/arm64: Don't let userspace update CNTVOFF once guest is running   Marc Zyngier
• [PATCH 00/13] arm64: Virtualization Host Extension support   Marc Zyngier
• [PATCH 01/13] arm/arm64: Add new is_kernel_in_hyp_mode predicate   Marc Zyngier
• [PATCH 02/13] arm64: Allow the arch timer to use the HYP timer   Marc Zyngier
• [PATCH 03/13] arm64: Add ARM64_HAS_VIRT_HOST_EXTN feature   Marc Zyngier
• [PATCH 04/13] arm64: KVM: skip HYP setup when already running in HYP   Marc Zyngier
• [PATCH 05/13] arm64: KVM: VHE: macroize VTCR_EL2 setup   Marc Zyngier
• [PATCH 06/13] arm64: KVM: VHE: Patch out kern_hyp_va   Marc Zyngier
• [PATCH 07/13] arm64: KVM: VHE: Patch out use of HVC   Marc Zyngier
• [PATCH 08/13] arm64: KVM: VHE: Preserve VHE config in world switch   Marc Zyngier
• [PATCH 09/13] arm64: KVM: VHE: Add alternatives for VHE-enabled world-switch   Marc Zyngier
• [PATCH 10/13] arm64: Add support for running Linux in EL2 mode   Marc Zyngier
• [PATCH 11/13] arm64: Panic when VHE and non VHE CPUs coexist   Marc Zyngier
• [PATCH 12/13] arm64: KVM: Split sysreg save/restore   Marc Zyngier
• [PATCH 13/13] arm64: KVM: VHE: Early interrupt handling   Marc Zyngier
• [RFC PATCH] KVM: arm/arm64: Don't let userspace update CNTVOFF once guest is running   Marc Zyngier
• [PATCH 07/13] arm64: KVM: VHE: Patch out use of HVC   Marc Zyngier
• [PATCH v2 00/10] arm/arm64: KVM: Active interrupt state switching for shared devices   Marc Zyngier
• [PATCH v2 01/10] arm/arm64: KVM: Fix ordering of timer/GIC on guest entry   Marc Zyngier
• [PATCH v2 02/10] arm/arm64: KVM: Move vgic handling to a non-preemptible section   Marc Zyngier
• [PATCH v2 03/10] KVM: arm/arm64: vgic: Convert struct vgic_lr to use bitfields   Marc Zyngier
• [PATCH v2 04/10] KVM: arm/arm64: vgic: Allow HW irq to be encoded in LR   Marc Zyngier
• [PATCH v2 05/10] KVM: arm/arm64: vgic: Relax vgic_can_sample_irq for edge IRQs   Marc Zyngier
• [PATCH v2 06/10] KVM: arm/arm64: vgic: Allow dynamic mapping of physical/virtual interrupts   Marc Zyngier
• [PATCH v2 07/10] KVM: arm/arm64: vgic: Allow HW interrupts to be queued to a guest   Marc Zyngier
• [PATCH v2 08/10] KVM: arm/arm64: vgic: Add vgic_{get, set}_phys_irq_active   Marc Zyngier
• [PATCH v2 09/10] KVM: arm/arm64: timer: Allow the timer to control the active state   Marc Zyngier
• [PATCH v2 10/10] KVM: arm/arm64: vgic: Allow non-shared device HW interrupts   Marc Zyngier
• [PATCH 09/13] arm64: KVM: VHE: Add alternatives for VHE-enabled world-switch   Marc Zyngier
• [PATCH 03/13] arm64: Add ARM64_HAS_VIRT_HOST_EXTN feature   Marc Zyngier
• [PATCH 01/13] arm/arm64: Add new is_kernel_in_hyp_mode predicate   Marc Zyngier
• [PATCH 0/6] irqchip: GICv2/v3: Add support for irq_vcpu_affinity   Marc Zyngier
• [PATCH 1/6] irqchip: GICv3: Convert to EOImode == 1   Marc Zyngier
• [PATCH 2/6] irqchip: GIC: Convert to EOImode == 1   Marc Zyngier
• [PATCH 3/6] irqchip: GICv3: Skip LPI deactivation   Marc Zyngier
• [PATCH 4/6] irqchip: GIC: Use chip_data instead of handler_data for cascaded interrupts   Marc Zyngier
• [PATCH 5/6] irqchip: GICv3: Don't deactivate interrupts forwarded to a guest   Marc Zyngier
• [PATCH 6/6] irqchip: GIC: Don't deactivate interrupts forwarded to a guest   Marc Zyngier
• [PATCH v3 00/15] Introducing per-device MSI domain   Marc Zyngier
• [PATCH 4/6] irqchip: GIC: Use chip_data instead of handler_data for cascaded interrupts   Marc Zyngier
• ACPI: regression: Failed to initialize GIC IRQ controller   Marc Zyngier
• [PATCH 4/6] irqchip: GIC: Use chip_data instead of handler_data for cascaded interrupts   Marc Zyngier
• ACPI: regression: Failed to initialize GIC IRQ controller   Marc Zyngier
• [PATCH v3 14/15] PCI/MSI: pci-xgene-msi: Get rid of struct msi_controller   Marc Zyngier
• [PATCH v2 6/9] irqchip / gic: Add stacked irqdomain support for ACPI based GICv2 init   Marc Zyngier
• [RFC Patch V1 11/12] genirq, PCI: Reorginize struct msi_desc to prepare for support of generic MSI   Marc Zyngier
• [RFC Patch V1 00/12] Reorganize struct msi_desc to prepare for support of generic MSI   Marc Zyngier
• [PATCH v3 00/15] Introducing per-device MSI domain   Marc Zyngier
• ACPI: regression: Failed to initialize GIC IRQ controller   Marc Zyngier
• [PATCH v4 00/19] Per-device MSI domain & platform MSI   Marc Zyngier
• [PATCH v4 01/19] genirq: irqdomain: Allow irq domain aliasing   Marc Zyngier
• [PATCH v4 02/19] PCI: MSI: Register irq domain with specific token   Marc Zyngier
• [PATCH v4 03/19] device core: Introduce per-device MSI domain pointer   Marc Zyngier
• [PATCH v4 04/19] PCI/MSI: Add hooks to populate the msi_domain field   Marc Zyngier
• [PATCH v4 05/19] PCI/MSI: of: Add support for OF-provided msi_domain   Marc Zyngier
• [PATCH v4 06/19] PCI/MSI: of: Allow msi_domain lookup using the host bridge node   Marc Zyngier
• [PATCH v4 07/19] PCI/MSI: Let pci_msi_get_domain use struct device's msi_domain   Marc Zyngier
• [PATCH v4 08/19] platform: of: Assign MSI domain to platform device   Marc Zyngier
• [PATCH v4 09/19] drivers: base: Add MSI domain support for non-PCI devices   Marc Zyngier
• [PATCH v4 10/19] genirq: Add DOMAIN_BUS_NEXUS irqdomain property   Marc Zyngier
• [PATCH v4 11/19] irqchip: gicv3-its: Split PCI/MSI code from the core ITS driver   Marc Zyngier
• [PATCH v4 12/19] irqchip: gicv3-its: Register irq domain with NEXUS token   Marc Zyngier
• [PATCH v4 13/19] irqchip: gicv3-its: Get rid of struct msi_controller   Marc Zyngier
• [PATCH v4 14/19] irqchip: gicv3-its: Make the PCI/MSI code standalone   Marc Zyngier
• [PATCH v4 15/19] irqchip: gicv3-its: Add platform MSI support   Marc Zyngier
• [PATCH v4 16/19] irqchip: GICv2m: Get rid of struct msi_controller   Marc Zyngier
• [PATCH v4 17/19] irqchip: GICv2m: Add platform MSI support   Marc Zyngier
• [PATCH v4 18/19] PCI/MSI: pci-xgene-msi: Get rid of struct msi_controller   Marc Zyngier
• [PATCH v4 19/19] PCI/MSI: Drop domain field from msi_controller   Marc Zyngier
• [PATCH 4/5] irqchip: gic-v3: Add gic_get_irq_domain() to get the irqdomain of the GIC.   Marc Zyngier
• [PATCH 2/5] gic-its: Allow pci_requester_id to be overridden.   Marc Zyngier
• [PATCH 5/5] PCI: Add host drivers for Cavium ThunderX processors.   Marc Zyngier
• [PATCH 4/5] irqchip: gic-v3: Add gic_get_irq_domain() to get the irqdomain of the GIC.   Marc Zyngier
• [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller   Marc Zyngier
• [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller   Marc Zyngier
• [PATCH 1/2] irqchip: gic: enable SKIP_SET_WAKE and MASK_ON_SUSPEND   Marc Zyngier
• [PATCH v3 1/3] IRQ/Gic-V3: Add mbigen driver to support mbigen interrupt controller   Marc Zyngier
• [PATCH 4/5] irqchip: gic-v3: Add gic_get_irq_domain() to get the irqdomain of the GIC.   Marc Zyngier
• [PATCH 4/5] irqchip: gic-v3: Add gic_get_irq_domain() to get the irqdomain of the GIC.   Marc Zyngier
• [PATCH 4/5] irqchip: gic-v3: Add gic_get_irq_domain() to get the irqdomain of the GIC.   Marc Zyngier
• [PATCH] irqchip: gicv3-its: Fix mapping of LPIs to collections   Marc Zyngier
• [PATCH] arm64/kvm: Add generic v8 KVM target   Marc Zyngier
• [PATCH] arm64/kvm: Add generic v8 KVM target   Marc Zyngier
• [PATCH v4 0/2] arm/arm64: KVM: Optimize arm64 fp/simd, saves 30-50% on exits   Marc Zyngier
• [RFCv2 PATCH 0/8] Introducing ACPI support for GICv2m   Marc Zyngier
• [PATCH v4 09/19] drivers: base: Add MSI domain support for non-PCI devices   Marc Zyngier
• [PATCH v3 4/8] irqchip / gic: Add stacked irqdomain support for ACPI based GICv2 init   Marc Zyngier
• [PATCH 0/5] Making the generic ACPI GSI layer irqdomain aware   Marc Zyngier
• [PATCH 1/5] genirq: irqdomain: Use an accessor for the of_node field   Marc Zyngier
• [PATCH 2/5] genirq: irqdomain: Remove irqdomain dependency on struct device_node   Marc Zyngier
• [PATCH 3/5] genirq: irqdomain: Add irq_create_acpi_mappings   Marc Zyngier
• [PATCH 4/5] acpi: gsi: Use acpi_gsi_descriptor to allocate interrupts   Marc Zyngier
• [PATCH 5/5] irqchip: GIC: Switch ACPI support to stacked domains   Marc Zyngier
• [PATCH 5/5] irqchip: GIC: Switch ACPI support to stacked domains   Marc Zyngier
• [PATCH v2 04/10] KVM: arm/arm64: vgic: Allow HW irq to be encoded in LR   Marc Zyngier
• [PATCH v2 06/10] KVM: arm/arm64: vgic: Allow dynamic mapping of physical/virtual interrupts   Marc Zyngier
• [PATCH v2 07/10] KVM: arm/arm64: vgic: Allow HW interrupts to be queued to a guest   Marc Zyngier
• [PATCH v2 10/10] KVM: arm/arm64: vgic: Allow non-shared device HW interrupts   Marc Zyngier
• [PATCH v2 03/10] KVM: arm/arm64: vgic: Convert struct vgic_lr to use bitfields   Marc Zyngier
• [PATCH 5/5] irqchip: GIC: Switch ACPI support to stacked domains   Marc Zyngier
• [PATCH 4/5] acpi: gsi: Use acpi_gsi_descriptor to allocate interrupts   Marc Zyngier
• [PATCH 1/5] genirq: irqdomain: Use an accessor for the of_node field   Marc Zyngier
• [PATCH 5/5] irqchip: GIC: Switch ACPI support to stacked domains   Marc Zyngier
• [RFT PATCH] ARM: pci: kill pcibios_msi_controller   Marc Zyngier
• [RFT PATCH] ARM: pci: kill pcibios_msi_controller   Marc Zyngier
• [PATCH 1/5] genirq: irqdomain: Use an accessor for the of_node field   Marc Zyngier
• [PATCH v4 04/19] PCI/MSI: Add hooks to populate the msi_domain field   Marc Zyngier
• [PATCH v4 04/19] PCI/MSI: Add hooks to populate the msi_domain field   Marc Zyngier
• [PATCH v4 07/19] PCI/MSI: Let pci_msi_get_domain use struct device's msi_domain   Marc Zyngier
• [PATCH v3 4/5] arm64: kvm: Adopt new alternative assembler macros   Marc Zyngier
• [PATCH v4 04/19] PCI/MSI: Add hooks to populate the msi_domain field   Marc Zyngier
• [PATCH v5 00/19] Per-device MSI domain & platform MSI   Marc Zyngier
• [PATCH v5 01/19] genirq: irqdomain: Allow irq domain aliasing   Marc Zyngier
• [PATCH v5 02/19] PCI: MSI: Register irq domain with specific token   Marc Zyngier
• [PATCH v5 03/19] device core: Introduce per-device MSI domain pointer   Marc Zyngier
• [PATCH v5 04/19] PCI/MSI: Add hooks to populate the msi_domain field   Marc Zyngier
• [PATCH v5 05/19] PCI/MSI: of: Add support for OF-provided msi_domain   Marc Zyngier
• [PATCH v5 06/19] PCI/MSI: of: Allow msi_domain lookup using the host bridge node   Marc Zyngier
• [PATCH v5 07/19] PCI/MSI: Let pci_msi_get_domain use struct device's msi_domain   Marc Zyngier
• [PATCH v5 08/19] platform: of: Assign MSI domain to platform device   Marc Zyngier
• [PATCH v5 09/19] drivers: base: Add MSI domain support for non-PCI devices   Marc Zyngier
• [PATCH v5 10/19] genirq: Add DOMAIN_BUS_NEXUS irqdomain property   Marc Zyngier
• [PATCH v5 11/19] irqchip: gicv3-its: Split PCI/MSI code from the core ITS driver   Marc Zyngier
• [PATCH v5 12/19] irqchip: gicv3-its: Register irq domain with NEXUS token   Marc Zyngier
• [PATCH v5 13/19] irqchip: gicv3-its: Get rid of struct msi_controller   Marc Zyngier
• [PATCH v5 14/19] irqchip: gicv3-its: Make the PCI/MSI code standalone   Marc Zyngier
• [PATCH v5 15/19] irqchip: gicv3-its: Add platform MSI support   Marc Zyngier
• [PATCH v5 16/19] irqchip: GICv2m: Get rid of struct msi_controller   Marc Zyngier
• [PATCH v5 17/19] irqchip: GICv2m: Add platform MSI support   Marc Zyngier
• [PATCH v5 18/19] PCI/MSI: pci-xgene-msi: Get rid of struct msi_controller   Marc Zyngier
• [PATCH v5 19/19] PCI/MSI: Drop domain field from msi_controller   Marc Zyngier
• [RFC] arm64: defconfig: enable 48-bit VA by default   Marc Zyngier
• [PATCH v2 0/7] Making the generic ACPI GSI layer irqdomain aware   Marc Zyngier
• [PATCH v2 1/7] genirq: irqdomain: Use an accessor for the of_node field   Marc Zyngier
• [PATCH v2 2/7] genirq: irqdomain: Remove irqdomain dependency on struct device_node   Marc Zyngier
• [PATCH v2 3/7] genirq: irqdomain: Add irq_create_acpi_mapping   Marc Zyngier
• [PATCH v2 4/7] acpi: gsi: Always perform an irq domain lookup   Marc Zyngier
• [PATCH v2 5/7] acpi: gsi: Add acpi_set_irq_model to initialize the GSI layer   Marc Zyngier
• [PATCH v2 6/7] irqchip: GIC: Switch ACPI support to stacked domains   Marc Zyngier
• [PATCH v2 7/7] acpi: gsi: Cleanup acpi_register_gsi   Marc Zyngier
• [PATCH v5 04/19] PCI/MSI: Add hooks to populate the msi_domain field   Marc Zyngier
• [PATCH v5 00/19] Per-device MSI domain & platform MSI   Marc Zyngier
• [PATCH 1/3] Docs: dt: add generic MSI bindings   Marc Zyngier
• [PATCH v2 3/7] genirq: irqdomain: Add irq_create_acpi_mapping   Marc Zyngier
• [PATCH v2 5/7] acpi: gsi: Add acpi_set_irq_model to initialize the GSI layer   Marc Zyngier
• [PATCH v3 00/11] arm/arm64: KVM: Active interrupt state switching for shared devices   Marc Zyngier
• [PATCH v3 01/11] arm/arm64: KVM: Fix ordering of timer/GIC on guest entry   Marc Zyngier
• [PATCH v3 02/11] arm/arm64: KVM: Move vgic handling to a non-preemptible section   Marc Zyngier
• [PATCH v3 03/11] KVM: arm/arm64: vgic: Convert struct vgic_lr to use bitfields   Marc Zyngier
• [PATCH v3 04/11] KVM: arm/arm64: vgic: Allow HW irq to be encoded in LR   Marc Zyngier
• [PATCH v3 05/11] KVM: arm/arm64: vgic: Relax vgic_can_sample_irq for edge IRQs   Marc Zyngier
• [PATCH v3 06/11] KVM: arm/arm64: vgic: Allow dynamic mapping of physical/virtual interrupts   Marc Zyngier
• [PATCH v3 07/11] KVM: arm/arm64: vgic: Allow HW interrupts to be queued to a guest   Marc Zyngier
• [PATCH v3 08/11] KVM: arm/arm64: vgic: Add vgic_{get, set}_phys_irq_active   Marc Zyngier
• [PATCH v3 09/11] KVM: arm/arm64: vgic: Prevent userspace injection of a mapped interrupt   Marc Zyngier
• [PATCH v3 10/11] KVM: arm/arm64: timer: Allow the timer to control the active state   Marc Zyngier
• [PATCH v3 11/11] KVM: arm/arm64: vgic: Allow HW interrupts for non-shared devices   Marc Zyngier
• [PATCH v2 1/2] ARM: PCI: bios32: replace panic with WARN messages on failures   Marc Zyngier
• [PATCH v2 1/7] genirq: irqdomain: Use an accessor for the of_node field   Marc Zyngier
• [PATCH v2 2/2] ARM: pci: kill pcibios_msi_controller   Marc Zyngier
• [PATCH 1/3] Docs: dt: add generic MSI bindings   Marc Zyngier
• [PATCH 2/3] Docs: dt: Add PCI MSI map bindings   Marc Zyngier
• [PATCH] arm64: KVM: remove remaining reference to vgic_sr_vectors   Marc Zyngier
• [PATCH v6 00/19] Per-device MSI domain & platform MSI   Marc Zyngier
• [PATCH v6 01/19] genirq: irqdomain: Allow irq domain aliasing   Marc Zyngier
• [PATCH v6 02/19] PCI: MSI: Register irq domain with specific token   Marc Zyngier
• [PATCH v6 03/19] device core: Introduce per-device MSI domain pointer   Marc Zyngier
• [PATCH v6 04/19] PCI/MSI: Add hooks to populate the msi_domain field   Marc Zyngier
• [PATCH v6 05/19] PCI/MSI: of: Add support for OF-provided msi_domain   Marc Zyngier
• [PATCH v6 06/19] PCI/MSI: of: Allow msi_domain lookup using the host bridge node   Marc Zyngier
• [PATCH v6 07/19] PCI/MSI: Let pci_msi_get_domain use struct device's msi_domain   Marc Zyngier
• [PATCH v6 08/19] platform: of: Assign MSI domain to platform device   Marc Zyngier
• [PATCH v6 09/19] drivers: base: Add MSI domain support for non-PCI devices   Marc Zyngier
• [PATCH v6 10/19] genirq: Add DOMAIN_BUS_NEXUS irqdomain property   Marc Zyngier
• [PATCH v6 11/19] irqchip: gicv3-its: Split PCI/MSI code from the core ITS driver   Marc Zyngier
• [PATCH v6 12/19] irqchip: gicv3-its: Register irq domain with NEXUS token   Marc Zyngier
• [PATCH v6 13/19] irqchip: gicv3-its: Get rid of struct msi_controller   Marc Zyngier
• [PATCH v6 14/19] irqchip: gicv3-its: Make the PCI/MSI code standalone   Marc Zyngier
• [PATCH v6 15/19] irqchip: gicv3-its: Add platform MSI support   Marc Zyngier
• [PATCH v6 16/19] irqchip: GICv2m: Get rid of struct msi_controller   Marc Zyngier
• [PATCH v6 17/19] irqchip: GICv2m: Add platform MSI support   Marc Zyngier
• [PATCH v6 18/19] PCI/MSI: pci-xgene-msi: Get rid of struct msi_controller   Marc Zyngier
• [PATCH v6 19/19] PCI/MSI: Drop domain field from msi_controller   Marc Zyngier
• [RFC 0/2] VFIO: Add virtual MSI doorbell support.   Marc Zyngier
• [PATCH 4/6] pci: altera: Add Altera PCIe MSI driver   Marc Zyngier
• [PATCH 4/6] pci: altera: Add Altera PCIe MSI driver   Marc Zyngier
• [PATCH] irqchip: gic: Add a cpu map for each GIC instance   Marc Zyngier
• [PATCH] irqchip: gic: Add a cpu map for each GIC instance   Marc Zyngier
• [PATCH] irqchip: gic: Add a cpu map for each GIC instance   Marc Zyngier
• [PATCH] irqchip: gic: Add a cpu map for each GIC instance   Marc Zyngier
• [PATCH] irqchip: gic: Add a cpu map for each GIC instance   Marc Zyngier
• [PATCH] irqchip/gic: Only allow the primary GIC to set the CPU map   Marc Zyngier
• [PATCH] irqchip/gic: Only allow the primary GIC to set the CPU map   Marc Zyngier
• [PATCH 2/2] irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance   Marc Zyngier
• [PATCH 2/2] irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance   Marc Zyngier
• [PATCH v2 3/5] pci: altera: Add Altera PCIe MSI driver   Marc Zyngier
• [PATCH v2 2/5] pci:host: Add Altera PCIe host controller driver   Marc Zyngier
• [tip:irq/core] device core: Introduce per-device MSI domain pointer   tip-bot for Marc Zyngier
• [PATCH] iommu/arm-smmu-v2: ThunderX(errata-23399) mis-extends 64bit registers   tchalamarla at caviumnetworks.com
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   dwalker at fifo99.com
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   dwalker at fifo99.com
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   dwalker at fifo99.com
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   dwalker at fifo99.com
• [PATCH 1/3] panic: Disable crash_kexec_post_notifiers if kdump is not available   dwalker at fifo99.com
• Oops at boot after commit 965278dcb8ab... when using split memory region   jean-philippe francois
• [PATCH 1/2] ARM: dts: imx7d: enable snvs rtc, onoffkey and power off   Frank.Li at freescale.com
• [PATCH 2/2] ARM: imx_v6_v7_defconfig: enable powerkey and syscon power off   Frank.Li at freescale.com
• [PATCH v3 0/7] add basic support for i.mx6 ul chip   Frank.Li at freescale.com
• [PATCH v3 1/7] ARM: imx: add i.mx6ul msl support   Frank.Li at freescale.com
• [PATCH v3 2/7] ARM: imx: add imx6ul clk tree support   Frank.Li at freescale.com
• [PATCH v3 3/7] Document: dt: binding: imx: update document for imx6ul support   Frank.Li at freescale.com
• [PATCH v3 4/7] ARM: dts: add i.mx6ul pin function include file   Frank.Li at freescale.com
• [PATCH v3 5/7] ARM: dts: imx: add imx6ul and imx6ul evk board support   Frank.Li at freescale.com
• [PATCH v3 6/7] ARM: imx: imx_v6_v7_defconfig enable imx6ul support   Frank.Li at freescale.com
• [PATCH v3 7/7] ARM: imx: add low-level debug support for i.mx6ul   Frank.Li at freescale.com
• [PATCH v4 0/7] add basic support for i.mx6 ul chip   Frank.Li at freescale.com
• [PATCH v4 1/7] ARM: imx: add i.mx6ul msl support   Frank.Li at freescale.com
• [PATCH v4 2/7] ARM: imx: add imx6ul clk tree support   Frank.Li at freescale.com
• [PATCH v4 3/7] Document: dt: binding: imx: update document for imx6ul support   Frank.Li at freescale.com
• [PATCH v4 4/7] ARM: dts: add i.mx6ul pin function include file   Frank.Li at freescale.com
• [PATCH v4 5/7] ARM: dts: imx: add imx6ul and imx6ul evk board support   Frank.Li at freescale.com
• [PATCH v4 6/7] ARM: imx: imx_v6_v7_defconfig enable imx6ul support   Frank.Li at freescale.com
• [PATCH v4 7/7] ARM: imx: add low-level debug support for i.mx6ul   Frank.Li at freescale.com
• [PATCH 1/1] ARM: dts: imx6ul: add snvs rtc, powerkey and poweroff support   Frank.Li at freescale.com
• [PATCH 1/1] ARM: dts: imx6ul: add usb host and function support   Frank.Li at freescale.com
• [PATCH 1/2] ARM: dts: imx6ul: fix low case define in imx6ul-pinfunc.h   Frank.Li at freescale.com
• [PATCH 2/2] ARM: dts: imx6ul: add qspi support   Frank.Li at freescale.com
• [PATCH v2 1/2] ARM: dts: imx6ul: fix low case define in imx6ul-pinfunc.h   Frank.Li at freescale.com
• [PATCH V2 2/2] ARM: dts: imx6ul: add qspi support   Frank.Li at freescale.com
• [PATCH v2 1/1] ARM: dts: imx7d: enable snvs rtc, onoffkey and power off   Frank.Li at freescale.com
• Passing arguments to cmdline or changing the devicetree node??   gianluca
• [GIT PULL] SoCFPGA fixes for v4.2-rc1   dinh.linux at gmail.com
• [GIT PULL] SoCFPGA DTS updates for v4.3   dinh.linux at gmail.com
• [GIT PULL] SoCFPGA updates for v4.3   dinh.linux at gmail.com
• [RFC PATCH v6 3/3] drivers: nvmem: Add Vybrid OCOTP support   maitysanchayan at gmail.com
• [RFC PATCH v6 3/3] drivers: nvmem: Add Vybrid OCOTP support   maitysanchayan at gmail.com
• [PATCH v2 0/2] Implement sample time consideration for Vybrid's ADC   maitysanchayan at gmail.com
• [PATCH v2 2/2] ARM: dts: vfxxx: Add property for minimum sample time   maitysanchayan at gmail.com
• [RFC PATCH v6 3/3] drivers: nvmem: Add Vybrid OCOTP support   maitysanchayan at gmail.com
• [PATCH v2 2/2] ARM: dts: vfxxx: Add property for minimum sample time   maitysanchayan at gmail.com
• [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50   maitysanchayan at gmail.com
• [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50   maitysanchayan at gmail.com
• [PATCH v2 3/4] touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50   maitysanchayan at gmail.com
• [PATCH 0/3] Add MDIO support to ThunderX NIC driver   mohun106 at gmail.com
• [PATCH 1/3] net: mdio-octeon: Modify driver to work on both ThunderX and Octeon   mohun106 at gmail.com
• [PATCH 2/3] net: mdio-octeon: Fix octeon_mdiobus_probe function for return values   mohun106 at gmail.com
• [PATCH 3/3] net: thunderx: Select CONFIG_MDIO_OCTEON for ThunderX NIC   mohun106 at gmail.com
• [PATCH v2 0/3] Add MDIO support to ThunderX NIC driver   mohun106 at gmail.com
• [PATCH v2 1/3] net: mdio-octeon: Modify driver to work on both ThunderX and Octeon   mohun106 at gmail.com
• [PATCH v2 2/3] net: mdio-octeon: Fix octeon_mdiobus_probe function for return values   mohun106 at gmail.com
• [PATCH v2 3/3] net: thunderx: Select CONFIG_MDIO_OCTEON for ThunderX NIC   mohun106 at gmail.com
• [PATCH v3 2/2] dma: Add Xilinx zynqmp dma engine driver support   punnaiah choudary kalluri
• [PATCH v3 2/2] dma: Add Xilinx zynqmp dma engine driver support   punnaiah choudary kalluri
• [PATCH v3 2/2] dma: Add Xilinx zynqmp dma engine driver support   punnaiah choudary kalluri
• [PATCH v2 5/9] iommu/arm-smmu: skip the execution of CMD_PREFETCH_CONFIG   leizhen
• [PATCH v2 9/9] iommu/arm-smmu: add support for non-pci devices   leizhen
• [PATCH v2 7/9] iommu/arm-smmu: remove arm_smmu_devices   leizhen
• [PATCH v2 6/9] iommu/arm-smmu: to support probe deferral   leizhen
• [PATCH v2 9/9] iommu/arm-smmu: add support for non-pci devices   leizhen
• [PATCH] phy: rockchip-usb: power down phy when rockchip phy probe   huang lin
• [PATCH 00/18] KVM: ARM64: Add guest PMU support   shannon.zhao at linaro.org
• [PATCH 01/18] ARM64: Move PMU register related defines to asm/pmu.h   shannon.zhao at linaro.org
• [PATCH 02/18] KVM: ARM64: Add initial support for PMU   shannon.zhao at linaro.org
• [PATCH 03/18] KVM: ARM64: Add offset defines for PMU registers   shannon.zhao at linaro.org
• [PATCH 04/18] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register   shannon.zhao at linaro.org
• [PATCH 05/18] KVM: ARM64: Add reset and access handlers for PMSELR_EL0 register   shannon.zhao at linaro.org
• [PATCH 06/18] KVM: ARM64: Add reset and access handlers for PMCEID0_EL0 and PMCEID1_EL0 register   shannon.zhao at linaro.org
• [PATCH 07/18] KVM: ARM64: PMU: Add perf event map and introduce perf event creating function   shannon.zhao at linaro.org
• [PATCH 08/18] KVM: ARM64: Add reset and access handlers for PMXEVTYPER_EL0 register   shannon.zhao at linaro.org
• [PATCH 09/18] KVM: ARM64: Add reset and access handlers for PMXEVCNTR_EL0 register   shannon.zhao at linaro.org
• [PATCH 10/18] KVM: ARM64: Add reset and access handlers for PMCCNTR_EL0 register   shannon.zhao at linaro.org
• [PATCH 11/18] KVM: ARM64: Add reset and access handlers for PMCNTENSET_EL0 and PMCNTENCLR_EL0 register   shannon.zhao at linaro.org
• [PATCH 12/18] KVM: ARM64: Add reset and access handlers for PMINTENSET_EL1 and PMINTENCLR_EL1 register   shannon.zhao at linaro.org
• [PATCH 13/18] KVM: ARM64: Add reset and access handlers for PMOVSSET_EL0 and PMOVSCLR_EL0 register   shannon.zhao at linaro.org
• [PATCH 14/18] KVM: ARM64: Add reset and access handlers for PMUSERENR_EL0 register   shannon.zhao at linaro.org
• [PATCH 15/18] KVM: ARM64: Add reset and access handlers for PMSWINC_EL0 register   shannon.zhao at linaro.org
• [PATCH 16/18] KVM: ARM64: Add access handlers for PMEVCNTRn_EL0 and PMEVTYPERn_EL0 register   shannon.zhao at linaro.org
• [PATCH 17/18] KVM: ARM64: Add PMU overflow interrupt routing   shannon.zhao at linaro.org
• [PATCH 18/18] KVM: ARM64: Add KVM_CAP_ARM_PMU and KVM_ARM_PMU_SET_IRQ   shannon.zhao at linaro.org
• [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus   leilk liu
• [PATCH v2 3/4] spi: mediatek: Add spi bus for Mediatek MT8173   leilk liu
• [PATCH v2 3/4] spi: mediatek: Add spi bus for Mediatek MT8173   leilk liu
• [PATCH v3 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus   leilk liu
• [PATCH v3 3/4] spi: mediatek: Add spi bus for Mediatek MT8173   leilk liu
• [PATCH v4 1/3] dt-binding: spi: Mediatek: Document devicetree bindings for spi bus   leilk liu
• [PATCH v4 0/3] Add Mediatek SPI bus driver   leilk liu
• kexec crash kernel boot failure on arm64   Anurup m
• [PATCH] pinctrl: mediatek: Implement pictrl irq wake handler   maoguang.meng at mediatek.com
• [PATCH v4] ARM: dts: add bcm2835-pwm bindings   mishal
• [PATCH v2 4/7] clk: samsung: exynos4x12: add cpu clock configuration data and instantiate cpu clock   Sylwester nawrocki
• [PATCH v3 1/4] clk: samsung: exynos5250: add cpu clock configuration data and instantiate cpu clock   Sylwester nawrocki
• Apply For Business and Personal Loan Here 3%   info at nslcorps.com
• [PATCH] ARM: socfpga: put back v7_invalidate_l1 in socfpga_secondary_startup   dinguyen at opensource.altera.com
• [PATCH] ARM: dts: socfpga: Add support of Terasic DE0 Atlas board   dinguyen at opensource.altera.com
• [PATCH] ARM: dts: socfpga: use stdout-path for chosen node   dinguyen at opensource.altera.com
• [PATCHv2] ARM: dts: socfpga: Add support of Terasic DE0 Atlas board   dinguyen at opensource.altera.com
• [PATCH] ARM: dts: socfpga: enable the data and instruction prefetch for the l2 cache   dinguyen at opensource.altera.com
• [PATCH] ARM: socfpga: add reset for the Arria 10 platform   dinguyen at opensource.altera.com
• [PATCHv3] ARM: dts: socfpga: Add support of Terasic DE0 Atlas board   dinguyen at opensource.altera.com
• [PATCHv2] ARM: socfpga: add reset for the Arria 10 platform   dinguyen at opensource.altera.com
• [PATCH 1/3] ARM: socfpga: dts: Correct the parent clock for l3_sp_clk and dbg_clk   dinguyen at opensource.altera.com
• [PATCH 2/3] ARM: socfpga: dts: Fix gpio dts entry for the correct clock   dinguyen at opensource.altera.com
• [PATCH 3/3] ARM: socfpga: dts: add missing clock gates to socfpga.dtsi   dinguyen at opensource.altera.com
• [PATCH] ARM: socfpga: dts: add osc1 as a possible parent for dbg_base_clk   dinguyen at opensource.altera.com
• [PATCH 3/7] ARM: keystone: Remove clk-provider.h include   santosh.shilimkar at oracle.com
• [PATCH v1 1/2] ARM: keystone: dts: fix dt bindings for PCIe   santosh.shilimkar at oracle.com
• [PATCH 0/2] ARM: Couple of dts fixes for v4.2-rcx   santosh.shilimkar at oracle.com
• [PATCH 2/2] ARM: dts: keystone: fix dt bindings to use post div register for mainpll   santosh.shilimkar at oracle.com
• "bus-cycles" perf event mapping   ranganath ramachandra
• [stericsson:st-sensors 1/1] drivers/iio/common/st_sensors/st_sensors_core.c:431:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'long unsigned int'   kbuild test robot
• [stericsson:earlydebug 1/1] init/main.c:513: undefined reference to `printascii'   kbuild test robot
• [stericsson:pl08x-dma 2/2] arch/arm/mach-versatile/core.c:763:2: error: unknown field 'get_signal' specified in initializer   kbuild test robot
• [arm-platforms:kvm-arm64/vhe 4/14] arch/arm/kvm/mmu.c:597:2: error: implicit declaration of function 'is_kernel_in_hyp_mode'   kbuild test robot
• [arm-platforms:irq/npci-msi-do-not-build 20/20] drivers/base/platform-msi.c:46:5: error: 'msi_alloc_info_t' has no member named 'desc'   kbuild test robot
• [arm-platforms:irq/npci-msi-v2 15/28] drivers/irqchip/irq-gic-v3-its.c:1417:28: error: 'DOMAIN_BUS_NEXUS_MSI' undeclared   kbuild test robot
• [arm-platforms:irq/gsi-irq-domain 30/33] kernel/irq/irqdomain.c:629:3: error: implicit declaration of function 'irq_domain_token_get_node'   kbuild test robot
• [arm-platforms:irq/npci-msi-v3 8/22] drivers/pci/of.c:80:1: warning: control reaches end of non-void function   kbuild test robot
• [arm-platforms:irq/npci-msi-v3 8/22] drivers/pci/of.c:74:2: error: implicit declaration of function 'irq_find_matching_host'   kbuild test robot
• [arm-platforms:irq/gsi-irq-domain-v2 38/38] kernel/irq/irqdomain.c:825:20: error: conflicting types for 'irq_domain_add_hierarchy'   kbuild test robot
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller   Thomas.Betker at rohde-schwarz.com
• [PATCH] keystone: dts: add psci command definition   santosh shilimkar
• [PATCH 14/18] ARM/omap2/timer: Migrate to new 'set-state' interface   santosh shilimkar
• [PATCH 12/18] ARM/omap1/time: Migrate to new 'set-state' interface   santosh shilimkar
• [PATCH 13/18] ARM/omap1/timer32: Migrate to new 'set-state' interface   santosh shilimkar
• arm: dts: update for 4.2-rcx   santosh shilimkar
• arm: dts: update for 4.2-rcx   santosh shilimkar
• arm: dts: update for 4.2-rcx   santosh shilimkar
• [RESEND][PATCH 4/4] ARM: dts: keystone: Add ti,keystone-spi for SPI   santosh shilimkar
• [PATCH 2/2] ARM: dts: keystone: fix dt bindings to use post div register for mainpll   santosh shilimkar
• [PATCH 2/2] ARM: dts: keystone: fix dt bindings to use post div register for mainpll   santosh shilimkar
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   public_timo.s at silentcreek.de
• [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi   public_timo.s at silentcreek.de
• question about detect hard lockups without NMIs using secondary cpus   yoma sophian
• question about detect hard lockups without NMIs using secondary cpus   yoma sophian
• some question about __dma_alloc in arch/arm/mm/dma-mapping.c   vichy
• some question about __dma_alloc in arch/arm/mm/dma-mapping.c   vichy
• some question about __dma_alloc in arch/arm/mm/dma-mapping.c   vichy
• [PATCH 3/3] regulator: 88pm800: Add dev_info to show probe success status   Valdis.Kletnieks at vt.edu
• [PATCH v10 1/5] drm/layerscape: Add Freescale DCU DRM driver   jianwei wang
• [PATCH v11 1/5] drm/layerscape: Add Freescale DCU DRM driver   jianwei wang
• [RFC] arm64:use set_fixmap_offset to make it more clear   yalin wang
• [RFC] arm64:use set_fixmap_offset to make it more clear   yalin wang
• [RFC] arm64:use set_fixmap_offset to make it more clear   yalin wang
• [RFC V2] arm64:use set_fixmap_offset to make it more clear   yalin wang
• [RFC] arm64:change jump_label to use branch instruction, not use NOP instr   yalin wang
• [RFC] arm64:change jump_label to use branch instruction, not use NOP instr   yalin wang
• [PATCH v2 1/5] drm/rockchip: vop: optimize virtual stride calculate   Mark yao
• [PATCH v2 2/5] drm/rockchip: vop: fix yuv plane support   Mark yao
• [PATCH] drm/rockchip: vop: remove hardware cursor window   Mark yao
• [PATCH v2 5/5] drm/rockchip: default enable win2/3 area0 bit   Mark yao
• [PATCH v2 3/5] drm/rockchip: vop: support plane scale   Mark yao
• [PATCH v2 5/5] drm/rockchip: default enable win2/3 area0 bit   Mark yao
• [PATCH v2 3/5] drm/rockchip: vop: support plane scale   Mark yao
• [PATCH] drm: Drop owner assignment from i2c_driver   Mark yao
• [PATCH] drm: Drop owner assignment from i2c_driver   Mark yao
• [PATCH v2 2/2] drm/rockchip: Drop owner assignment from platform_driver   Mark yao
• [PATCH v3 3/6] drm/rockchip: vop: Add yuv plane support   Mark yao
• [PATCH v2 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller   chunfeng yun
• [PATCH v2 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller   chunfeng yun
• [PATCH v2 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs   chunfeng yun
• [PATCH v2 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs   chunfeng yun
• [PATCH v2 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller   chunfeng yun
• [PATCH v2 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173   chunfeng yun
• [PATCH v2 4/5] xhci: mediatek: support MTK xHCI host controller   chunfeng yun
• [PATCH v2 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs   chunfeng yun
• [PATCH v3 0/5] Mediatek xHCI support   chunfeng yun
• [PATCH v3 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173   chunfeng yun
• [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs   chunfeng yun
• [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller   chunfeng yun
• [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs   chunfeng yun
• [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs   chunfeng yun
• [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs   chunfeng yun
• [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller   chunfeng yun
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   zhengxing
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   zhengxing
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   zhengxing
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   zhengxing
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   zhengxing
• [PATCH 2/2] ASoC: rockchip: Add machine driver for rt5645/rt5650 codec   zhengxing
• [PATCH 1/2] ASoC: rockchip: Add machine driver for max98090 codec   zhengxing
• [PATCH v3 01/11] KVM: arm: plug guest debug exploit   zichao
• [PATCH v3 04/11] KVM: arm: common infrastructure for handling AArch32 CP14/CP15   zichao
• [PATCH v3 06/11] KVM: arm: add trap handlers for 32-bit debug registers   zichao
• [PATCH v3 08/11] KVM: arm: implement dirty bit mechanism for debug registers   zichao