[PATCH v2 1/3] mailbox/omap: Add ti, mbox-send-noirq quirk to fix AM33xx CPU Idle

[Dave Gerlach]

The mailbox framework controls the transmission queue and requires
either its controller implementations or clients to run the state
machine for the Tx queue. The OMAP mailbox controller uses a Tx-ready
interrupt as the equivalent of a Tx-done interrupt to run this Tx
queue state-machine.

The WkupM3 processor on AM33xx and AM43xx SoCs is used to offload
certain PM tasks, like doing the necessary operations for Device
PM suspend/resume or for entering lower c-states during cpuidle.

The CPUIdle on AM33xx requires the messages to be sent without
having to trigger the Tx-ready interrupts, as the interrupt
would immediately terminate the CPUIdle operation. Support for
this has been added by introducing a DT quirk, "ti,mbox-send-noirq"
and using it to modify the normal OMAP mailbox controller behavior
on the sub-mailboxes used to communicate with the WkupM3 remote
processor. This also requires the wkup_m3_ipc driver to adjust
its mailbox usage logic to run the Tx state machine.

NOTE:
- AM43xx does not communicate with WkupM3 for CPU Idle, so is
  not affected by this behavior. But, it uses the same IPC driver
  for PM suspend/resume functionality, so requires the quirk as
  well, because of changes to the common wkup_m3_ipc driver.

Signed-off-by: Dave Gerlach <d-gerlach at ti.com>
[s-anna at ti.com: revise logic and update comments/patch description]
Signed-off-by: Suman Anna <s-anna at ti.com>
---
 .../devicetree/bindings/mailbox/omap-mailbox.txt   |  8 ++++
 drivers/mailbox/omap-mailbox.c                     | 49 ++++++++++++++++++++--
 2 files changed, 53 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
index d1a0433..9b40c49 100644
--- a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
+++ b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
@@ -75,6 +75,14 @@ data that represent the following:
     Cell #3 (usr_id)  - mailbox user id for identifying the interrupt line
                         associated with generating a tx/rx fifo interrupt.
 
+Optional Properties:
+--------------------
+- ti,mbox-send-noirq:   Quirk flag to allow the client user of this sub-mailbox
+                        to send messages without triggering a Tx ready interrupt,
+                        and to control the Tx ticker. Should be used only on
+                        sub-mailboxes used to communicate with WkupM3 remote
+                        processor on AM33xx/AM43xx SoCs.
+
 Mailbox Users:
 ==============
 A device needing to communicate with a target processor device should specify
diff --git a/drivers/mailbox/omap-mailbox.c b/drivers/mailbox/omap-mailbox.c
index a3dbfd9..b7f636f 100644
--- a/drivers/mailbox/omap-mailbox.c
+++ b/drivers/mailbox/omap-mailbox.c
@@ -38,6 +38,8 @@
 #include <linux/mailbox_controller.h>
 #include <linux/mailbox_client.h>
 
+#include "mailbox.h"
+
 #define MAILBOX_REVISION		0x000
 #define MAILBOX_MESSAGE(m)		(0x040 + 4 * (m))
 #define MAILBOX_FIFOSTATUS(m)		(0x080 + 4 * (m))
@@ -106,6 +108,7 @@ struct omap_mbox_fifo_info {
 	int rx_irq;
 
 	const char *name;
+	bool send_no_irq;
 };
 
 struct omap_mbox {
@@ -119,6 +122,7 @@ struct omap_mbox {
 	u32			ctx[OMAP4_MBOX_NR_REGS];
 	u32			intr_type;
 	struct mbox_chan	*chan;
+	bool			send_no_irq;
 };
 
 /* global variables for the mailbox devices */
@@ -418,6 +422,9 @@ static int omap_mbox_startup(struct omap_mbox *mbox)
 		goto fail_request_irq;
 	}
 
+	if (mbox->send_no_irq)
+		mbox->chan->txdone_method = TXDONE_BY_ACK;
+
 	_omap_mbox_enable_irq(mbox, IRQ_RX);
 
 	return 0;
@@ -586,13 +593,27 @@ static void omap_mbox_chan_shutdown(struct mbox_chan *chan)
 	mutex_unlock(&mdev->cfg_lock);
 }
 
-static int omap_mbox_chan_send_data(struct mbox_chan *chan, void *data)
+static int omap_mbox_chan_send_noirq(struct omap_mbox *mbox, void *data)
 {
-	struct omap_mbox *mbox = mbox_chan_to_omap_mbox(chan);
 	int ret = -EBUSY;
 
-	if (!mbox)
-		return -EINVAL;
+	if (!mbox_fifo_full(mbox)) {
+		_omap_mbox_enable_irq(mbox, IRQ_RX);
+		mbox_fifo_write(mbox, (mbox_msg_t)data);
+		ret = 0;
+		_omap_mbox_disable_irq(mbox, IRQ_RX);
+
+		/* we must read and ack the interrupt directly from here */
+		mbox_fifo_read(mbox);
+		ack_mbox_irq(mbox, IRQ_RX);
+	}
+
+	return ret;
+}
+
+static int omap_mbox_chan_send(struct omap_mbox *mbox, void *data)
+{
+	int ret = -EBUSY;
 
 	if (!mbox_fifo_full(mbox)) {
 		mbox_fifo_write(mbox, (mbox_msg_t)data);
@@ -604,6 +625,22 @@ static int omap_mbox_chan_send_data(struct mbox_chan *chan, void *data)
 	return ret;
 }
 
+static int omap_mbox_chan_send_data(struct mbox_chan *chan, void *data)
+{
+	struct omap_mbox *mbox = mbox_chan_to_omap_mbox(chan);
+	int ret;
+
+	if (!mbox)
+		return -EINVAL;
+
+	if (mbox->send_no_irq)
+		ret = omap_mbox_chan_send_noirq(mbox, data);
+	else
+		ret = omap_mbox_chan_send(mbox, data);
+
+	return ret;
+}
+
 static const struct mbox_chan_ops omap_mbox_chan_ops = {
 	.startup        = omap_mbox_chan_startup,
 	.send_data      = omap_mbox_chan_send_data,
@@ -732,6 +769,9 @@ static int omap_mbox_probe(struct platform_device *pdev)
 			finfo->rx_usr = tmp[2];
 
 			finfo->name = child->name;
+
+			if (of_find_property(child, "ti,mbox-send-noirq", NULL))
+				finfo->send_no_irq = true;
 		} else {
 			finfo->tx_id = info->tx_id;
 			finfo->rx_id = info->rx_id;
@@ -791,6 +831,7 @@ static int omap_mbox_probe(struct platform_device *pdev)
 		fifo->irqstatus = MAILBOX_IRQSTATUS(intr_type, finfo->rx_usr);
 		fifo->irqdisable = MAILBOX_IRQDISABLE(intr_type, finfo->rx_usr);
 
+		mbox->send_no_irq = finfo->send_no_irq;
 		mbox->intr_type = intr_type;
 
 		mbox->parent = mdev;
-- 
2.4.5