[PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC

[Sylwester Nawrocki]

On 12/06/15 03:53, Krzysztof Kozlowski wrote:
> The TSADC gate clock was used in Exynos4x12 DTSI for exynos-adc driver.
> However TSADC is present only on Exynos4210 so on Trats2 board (with
> Exynos4412 SoC) the exynos-adc driver could not be probed:
>    ERROR: could not get clock /adc at 126C0000:adc(0)
>    exynos-adc 126c0000.adc: failed getting clock, err = -2
>    exynos-adc: probe of 126c0000.adc failed with error -2
> 
> Instead on Exynos4x12 SoCs the main clock used by Analog to Digital
> Converter is located in different register and it is named in datasheet
> as PCLK_ADC. Regardless of the name the purpose of this PCLK_ADC clock
> is the same as purpose of TSADC from Exynos4210.
> 
> The patch adds gate clock for Exynos4x12 using the proper register so
> backward compatibility is preserved. This fixes the probe of exynos-adc
> driver on Exynos4x12 boards and allows accessing sensors connected to it
> on Trats2 board (ntc,ncp15wb473 AP and battery thermistors).
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
> Cc: <stable at vger.kernel.org>
> Fixes: c63c57433003 ("ARM: dts: Add ADC's dt data to read raw data for exynos4x12")
> Link: https://lkml.org/lkml/2015/6/11/85

Mike, could you apply this patch directly? I can't seem to find any
more independent patches for clk/samsung pull request.
Alternatively here is a branch you could cherry-pick it from with
all Acked/Reviewed tags:

git://linuxtv.org/snawrocki/samsung.git for-v4.2/clk/fixes-1

--
Regards,
Sylwester

> Changes since v1:
> 1. After discussion on LKML this solution was chosen because it smaller,
>    simpler, self-contained (one patch to fix issue) and maintains backward
>    compatibility. Thanks to Javier Martinez Canillas and Tomasz Figa for
>    valuable comments.
> 2. Dropped patch 2/2 because now it is not needed. The clock id "TSADC"
>    will be used on all Exynos4 boards.
> 3. Added CC-stable.
> ---
>  drivers/clk/samsung/clk-exynos4.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
> index 714d6ba782c8..f7890bf652e6 100644
> --- a/drivers/clk/samsung/clk-exynos4.c
> +++ b/drivers/clk/samsung/clk-exynos4.c
> @@ -85,6 +85,7 @@
>  #define DIV_PERIL4		0xc560
>  #define DIV_PERIL5		0xc564
>  #define E4X12_DIV_CAM1		0xc568
> +#define E4X12_GATE_BUS_FSYS1	0xc744
>  #define GATE_SCLK_CAM		0xc820
>  #define GATE_IP_CAM		0xc920
>  #define GATE_IP_TV		0xc924
> @@ -1095,6 +1096,7 @@ static struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = {
>  		0),
>  	GATE(CLK_PPMUIMAGE, "ppmuimage", "aclk200", E4X12_GATE_IP_IMAGE, 9, 0,
>  		0),
> +	GATE(CLK_TSADC, "tsadc", "aclk133", E4X12_GATE_BUS_FSYS1, 16, 0, 0),
>  	GATE(CLK_MIPI_HSI, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0),
>  	GATE(CLK_CHIPID, "chipid", "aclk100", E4X12_GATE_IP_PERIR, 0, 0, 0),
>  	GATE(CLK_SYSREG, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1,
> 


-- 
Sylwester Nawrocki
Samsung R&D Institute Poland