[PATCH] keystone: dts: add psci command definition
Vitaly Andrianov
vitalya at ti.com
Wed Jul 1 06:05:31 PDT 2015
On 07/01/2015 08:41 AM, Mark Rutland wrote:
> On Wed, Jul 01, 2015 at 01:13:04PM +0100, Vitaly Andrianov wrote:
>> This commit adds definition for cpu_on, cpu_off and cpu_suspend commands.
>> These definitions must match the corresponding PSCI definitions in
>> boot monitor.
>>
>> Signed-off-by: Vitaly Andrianov <vitalya at ti.com>
>> ---
>> arch/arm/boot/dts/keystone.dtsi | 8 ++++++++
>> 1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
>> index c06542b..ab60fca 100644
>> --- a/arch/arm/boot/dts/keystone.dtsi
>> +++ b/arch/arm/boot/dts/keystone.dtsi
>> @@ -58,6 +58,14 @@
>> <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
>> };
>>
>> + psci {
>> + compatible = "arm,psci";
>> + method = "smc";
>> + cpu_suspend = <0x84000001>;
>> + cpu_off = <0x84000002>;
>> + cpu_on = <0x84000003>;
>> + };
>
> It would be nice to have this injected automatically by the bootlaoder
> when PSCI is present, as that way users of existing systems can upgrade
> their DTB and still have things boot.
>
> Thanks,
> Mark.
>
So, KS2 kernel doesn't need that commit and has to wait this from
u-boot? Actually PSCI support is a part of KS2 boot-monitor. U-boot is
just responsible to load and start it, but doesn't know whether PSCI is
supported.
In any case you are right. The DTS also doesn't know whether boot-
monitor supports PSCI. It is better to make u-boot to fix up the dts.
Let's forget about this patch. I'll work on dts fix-up in u-boot.
Thanks,
Vitaly
>> +
>> soc {
>> #address-cells = <1>;
>> #size-cells = <1>;
>> --
>> 1.9.1
>>
More information about the linux-arm-kernel
mailing list