[PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core
Robert Baldyga
r.baldyga at samsung.com
Tue Jul 14 23:32:29 PDT 2015
Move ep_matches() function to udc-core and rename it to
usb_gadget_ep_match_desc(). This function can be used by UDC drivers
in 'match_ep' callback to avoid writing lots of repetitive code.
Replace all calls of ep_matches() with usb_gadget_ep_match_desc().
Signed-off-by: Robert Baldyga <r.baldyga at samsung.com>
---
drivers/usb/gadget/epautoconf.c | 95 +++++----------------------------------
drivers/usb/gadget/udc/udc-core.c | 69 ++++++++++++++++++++++++++++
include/linux/usb/gadget.h | 8 ++++
3 files changed, 88 insertions(+), 84 deletions(-)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 1b1fee0..3f0a380 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -22,82 +22,6 @@
#include "gadget_chips.h"
-static int
-ep_matches (
- struct usb_gadget *gadget,
- struct usb_ep *ep,
- struct usb_endpoint_descriptor *desc,
- struct usb_ss_ep_comp_descriptor *ep_comp
-)
-{
- u8 type;
- u16 max;
- int num_req_streams = 0;
-
- /* endpoint already claimed? */
- if (ep->claimed)
- return 0;
-
- type = usb_endpoint_type(desc);
- max = 0x7ff & usb_endpoint_maxp(desc);
-
- if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
- return 0;
- else if (!ep->caps.dir_out)
- return 0;
-
- if (max > ep->maxpacket_limit)
- return 0;
-
- /* "high bandwidth" works only at high speed */
- if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
- return 0;
-
- switch (type) {
- case USB_ENDPOINT_XFER_CONTROL:
- /* only support ep0 for portable CONTROL traffic */
- return 0;
- case USB_ENDPOINT_XFER_ISOC:
- if (!ep->caps.type_iso)
- return 0;
- /* ISO: limit 1023 bytes full speed,
- * 1024 high/super speed
- */
- if (!gadget_is_dualspeed(gadget) && max > 1023)
- return 0;
- break;
- case USB_ENDPOINT_XFER_BULK:
- if (!ep->caps.type_bulk)
- return 0;
- if (ep_comp && gadget_is_superspeed(gadget)) {
- /* Get the number of required streams from the
- * EP companion descriptor and see if the EP
- * matches it
- */
- num_req_streams = ep_comp->bmAttributes & 0x1f;
- if (num_req_streams > ep->max_streams)
- return 0;
- }
- break;
- case USB_ENDPOINT_XFER_INT:
- /* Bulk endpoints handle interrupt transfers,
- * except the toggle-quirky iso-synch kind
- */
- if (!ep->caps.type_int && !ep->caps.type_bulk)
- return 0;
- /* INT: limit 64 bytes full speed,
- * 1024 high/super speed
- */
- if (!gadget_is_dualspeed(gadget) && max > 64)
- return 0;
- break;
- }
-
- /* MATCH!! */
-
- return 1;
-}
-
static struct usb_ep *
find_ep (struct usb_gadget *gadget, const char *name)
{
@@ -180,10 +104,12 @@ struct usb_ep *usb_ep_autoconfig_ss(
if (type == USB_ENDPOINT_XFER_INT) {
/* ep-e, ep-f are PIO with only 64 byte fifos */
ep = find_ep(gadget, "ep-e");
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget,
+ ep, desc, ep_comp))
goto found_ep;
ep = find_ep(gadget, "ep-f");
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget,
+ ep, desc, ep_comp))
goto found_ep;
}
@@ -191,20 +117,21 @@ struct usb_ep *usb_ep_autoconfig_ss(
snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
usb_endpoint_dir_in(desc) ? "in" : "out");
ep = find_ep(gadget, name);
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
goto found_ep;
} else if (gadget_is_goku (gadget)) {
if (USB_ENDPOINT_XFER_INT == type) {
/* single buffering is enough */
ep = find_ep(gadget, "ep3-bulk");
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget,
+ ep, desc, ep_comp))
goto found_ep;
} else if (USB_ENDPOINT_XFER_BULK == type
&& (USB_DIR_IN & desc->bEndpointAddress)) {
/* DMA may be available */
ep = find_ep(gadget, "ep2-bulk");
- if (ep && ep_matches(gadget, ep, desc,
- ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget,
+ ep, desc, ep_comp))
goto found_ep;
}
@@ -223,14 +150,14 @@ struct usb_ep *usb_ep_autoconfig_ss(
ep = find_ep(gadget, "ep2out");
} else
ep = NULL;
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
goto found_ep;
#endif
}
/* Second, look at endpoints until an unclaimed one looks usable */
list_for_each_entry (ep, &gadget->ep_list, ep_list) {
- if (ep_matches(gadget, ep, desc, ep_comp))
+ if (usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
goto found_ep;
}
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index d69c355..2dff8df 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -129,6 +129,75 @@ EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
/* ------------------------------------------------------------------------- */
+int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
+ struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+ u8 type;
+ u16 max;
+ int num_req_streams = 0;
+
+ /* endpoint already claimed? */
+ if (ep->claimed)
+ return 0;
+
+ type = usb_endpoint_type(desc);
+ max = 0x7ff & usb_endpoint_maxp(desc);
+
+ if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
+ return 0;
+ else if (!ep->caps.dir_out)
+ return 0;
+
+ if (max > ep->maxpacket_limit)
+ return 0;
+
+ /* "high bandwidth" works only at high speed */
+ if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
+ return 0;
+
+ switch (type) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ /* only support ep0 for portable CONTROL traffic */
+ return 0;
+ case USB_ENDPOINT_XFER_ISOC:
+ if (!ep->caps.type_iso)
+ return 0;
+ /* ISO: limit 1023 bytes full speed, 1024 high/super speed */
+ if (!gadget_is_dualspeed(gadget) && max > 1023)
+ return 0;
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ if (!ep->caps.type_bulk)
+ return 0;
+ if (ep_comp && gadget_is_superspeed(gadget)) {
+ /* Get the number of required streams from the
+ * EP companion descriptor and see if the EP
+ * matches it
+ */
+ num_req_streams = ep_comp->bmAttributes & 0x1f;
+ if (num_req_streams > ep->max_streams)
+ return 0;
+ }
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ /* Bulk endpoints handle interrupt transfers,
+ * except the toggle-quirky iso-synch kind
+ */
+ if (!ep->caps.type_int && !ep->caps.type_bulk)
+ return 0;
+ /* INT: limit 64 bytes full speed, 1024 high/super speed */
+ if (!gadget_is_dualspeed(gadget) && max > 64)
+ return 0;
+ break;
+ }
+
+ return 1;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_ep_match_desc);
+
+/* ------------------------------------------------------------------------- */
+
static void usb_gadget_state_work(struct work_struct *work)
{
struct usb_gadget *gadget = work_to_gadget(work);
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 0041bb9..77e2c1e 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -1079,6 +1079,14 @@ extern void usb_gadget_giveback_request(struct usb_ep *ep,
/*-------------------------------------------------------------------------*/
+/* utility to check if endpoint caps match descriptor needs */
+
+extern int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
+ struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp);
+
+/*-------------------------------------------------------------------------*/
+
/* utility to update vbus status for udc core, it may be scheduled */
extern void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status);
--
1.9.1
More information about the linux-arm-kernel
mailing list