[PATCH 2/2] irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance

[Marc Zyngier]

On 30/07/15 18:56, Jon Hunter wrote:
> 
> On 30/07/15 17:51, Marc Zyngier wrote:
>> On 30/07/15 17:26, Jon Hunter wrote:
>>> Commit 3228950621d9 ("irqchip: gic: Preserve gic V2 bypass bits in cpu
>>> ctrl register") added a new function, gic_cpu_if_up(), to program the
>>> GIC CPU_CTRL register. This function assumes that there is only one GIC
>>> instance present and hence always uses the chip data for the primary GIC
>>> controller. Although it is not common for there to be a secondary, some
>>> devices do support a secondary. Therefore, fix this by passing
>>> gic_cpu_if_up() a pointer to the appropriate chip data structure.
>>>
>>> Similarly, the function gic_cpu_if_down() only assumes that there is a
>>> single GIC instance present. Update this function so that an instance
>>> number is passed for the appropriate GIC. The vexpress TC2 (which has
>>> a single GIC) is currently the only user of this function and so update
>>> it accordingly.
>>>
>>> Signed-off-by: Jon Hunter <jonathanh at nvidia.com>
>>> ---
>>> I was hoping to make the gic_cpu_if_up/down function more symmetric as we
>>> discussed but it is not possible to pass the gic_nr to gic_cpu_if_up()
>>> from all the places called without making more changes. However, given
>>> that gic_cpu_if_up() is a local function and gic_cpu_if_down() is public,
>>> may be it does not matter too much.
>>>
>>>  arch/arm/mach-vexpress/tc2_pm.c |  2 +-
>>>  drivers/irqchip/irq-gic.c       | 14 +++++++-------
>>>  include/linux/irqchip/arm-gic.h |  2 +-
>>>  3 files changed, 9 insertions(+), 9 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
>>> index b3328cd46c33..1aa4ccece69f 100644
>>> --- a/arch/arm/mach-vexpress/tc2_pm.c
>>> +++ b/arch/arm/mach-vexpress/tc2_pm.c
>>> @@ -80,7 +80,7 @@ static void tc2_pm_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster)
>>>  	 * to the CPU by disabling the GIC CPU IF to prevent wfi
>>>  	 * from completing execution behind power controller back
>>>  	 */
>>> -	gic_cpu_if_down();
>>> +	gic_cpu_if_down(0);
>>>  }
>>>  
>>>  static void tc2_pm_cluster_powerdown_prepare(unsigned int cluster)
>>> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
>>> index 7566fe259d27..cf9aca22120f 100644
>>> --- a/drivers/irqchip/irq-gic.c
>>> +++ b/drivers/irqchip/irq-gic.c
>>> @@ -356,10 +356,10 @@ static u8 gic_get_cpumask(struct gic_chip_data *gic)
>>>  	return mask;
>>>  }
>>>  
>>> -static void gic_cpu_if_up(void)
>>> +static void gic_cpu_if_up(struct gic_chip_data *gic)
>>>  {
>>> -	void __iomem *cpu_base = gic_data_cpu_base(&gic_data[0]);
>>> -	void __iomem *dist_base = gic_data_dist_base(&gic_data[0]);
>>> +	void __iomem *cpu_base = gic_data_cpu_base(gic);
>>> +	void __iomem *dist_base = gic_data_dist_base(gic);
>>
>> Which tree is that against? I don't have a dist_base in mainline...
> 
> It is based upon linux-next. I can rebase on the current mainline if you
> want them for v4.2.

It'd be good to fix it in mainline ASAP, as the Realview platforms are a
tiny bit dead at the moment, so a 4.2-rc would be good. The conflict
with Russell's FIQ work won't be hard to solve anyway.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...