[PATCH v2 07/10] KVM: arm/arm64: vgic: Allow HW interrupts to be queued to a guest

Christoffer Dall christoffer.dall at linaro.org
Fri Jul 17 14:56:08 PDT 2015


On Wed, Jul 08, 2015 at 06:56:39PM +0100, Marc Zyngier wrote:
> To allow a HW interrupt to be injected into a guest, we lookup the
> guest virtual interrupt in the irq_phys_map rbtree, and if we have

s/rbtree/list/

> a match, encode both interrupts in the LR.
> 
> We also mark the interrupt as "active" at the host distributor level.
> 
> On guest EOI on the virtual interrupt, the host interrupt will be
> deactivated.
> 
> Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
> ---
>  virt/kvm/arm/vgic.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 69 insertions(+), 3 deletions(-)
> 
> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> index 3424329..f8582d7 100644
> --- a/virt/kvm/arm/vgic.c
> +++ b/virt/kvm/arm/vgic.c
> @@ -1118,6 +1118,26 @@ static void vgic_queue_irq_to_lr(struct kvm_vcpu *vcpu, int irq,
>  	if (!vgic_irq_is_edge(vcpu, irq))
>  		vlr.state |= LR_EOI_INT;
>  
> +	if (vlr.irq >= VGIC_NR_SGIS) {
> +		struct irq_phys_map *map;
> +		map = vgic_irq_map_search(vcpu, irq);
> +
> +		if (map) {
> +			int ret;
> +
> +			BUG_ON(!map->active);
> +			vlr.hwirq = map->phys_irq;
> +			vlr.state |= LR_HW;
> +			vlr.state &= ~LR_EOI_INT;
> +
> +			ret = irq_set_irqchip_state(map->irq,
> +						    IRQCHIP_STATE_ACTIVE,
> +						    true);

So if we have a mapping, and the virtual interrupt is being injected,
then we must set the state to active in the physical world, because
otherwise the guest will just exit before processing the virtual
interrupt, yes?

I think this deserves a comment here.

> +			vgic_irq_set_queued(vcpu, irq);

And we set it queued only to avoid sampling it again and setting
PENDING+ACTIVE, because the hardware doesn't support setting that state
when the HW bit is set, yes?

I think a comment here is warranted too.

> +			WARN_ON(ret);
> +		}
> +	}
> +
>  	vgic_set_lr(vcpu, lr_nr, vlr);
>  	vgic_sync_lr_elrsr(vcpu, lr_nr, vlr);
>  }
> @@ -1342,6 +1362,35 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
>  	return level_pending;
>  }
>  
> +/* Return 1 if HW interrupt went from active to inactive, and 0 otherwise */

... also clear the active state on the physical distributor so that
shared devices can be used in a different context. (did I get this
right?)

> +static int vgic_sync_hwirq(struct kvm_vcpu *vcpu, struct vgic_lr vlr)
> +{
> +	struct irq_phys_map *map;
> +	int ret;
> +
> +	if (!(vlr.state & LR_HW))
> +		return 0;
> +
> +	map = vgic_irq_map_search(vcpu, vlr.irq);
> +	BUG_ON(!map || !map->active);
> +
> +	ret = irq_get_irqchip_state(map->irq,
> +				    IRQCHIP_STATE_ACTIVE,
> +				    &map->active);
> +
> +	WARN_ON(ret);
> +
> +	if (map->active) {
> +		ret = irq_set_irqchip_state(map->irq,
> +					    IRQCHIP_STATE_ACTIVE,
> +					    false);
> +		WARN_ON(ret);
> +		return 0;
> +	}
> +
> +	return 1;
> +}
> +
>  /* Sync back the VGIC state after a guest run */
>  static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
>  {
> @@ -1356,14 +1405,31 @@ static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
>  	elrsr = vgic_get_elrsr(vcpu);
>  	elrsr_ptr = u64_to_bitmask(&elrsr);
>  
> -	/* Clear mappings for empty LRs */
> -	for_each_set_bit(lr, elrsr_ptr, vgic->nr_lr) {
> +	/* Deal with HW interrupts, and clear mappings for empty LRs */
> +	for (lr = 0; lr < vgic->nr_lr; lr++) {
>  		struct vgic_lr vlr;
>  
> -		if (!test_and_clear_bit(lr, vgic_cpu->lr_used))
> +		if (!test_bit(lr, vgic_cpu->lr_used))
>  			continue;
>  
>  		vlr = vgic_get_lr(vcpu, lr);
> +		if (vgic_sync_hwirq(vcpu, vlr)) {
> +			/*
> +			 * So this is a HW interrupt that the guest
> +			 * EOI-ed. Clean the LR state and allow the
> +			 * interrupt to be queued again.

s/queued/sampled/ ?

> +			 */
> +			vlr.state = 0;
> +			vlr.hwirq = 0;
> +			vgic_set_lr(vcpu, lr, vlr);
> +			vgic_irq_clear_queued(vcpu, vlr.irq);
> +			set_bit(lr, elrsr_ptr);
> +		}
> +
> +		if (!test_bit(lr, elrsr_ptr))
> +			continue;
> +
> +		clear_bit(lr, vgic_cpu->lr_used);
>  
>  		BUG_ON(vlr.irq >= dist->nr_irqs);
>  		vgic_cpu->vgic_irq_lr_map[vlr.irq] = LR_EMPTY;
> -- 
> 2.1.4
> 
Thanks,
-Christoffer



More information about the linux-arm-kernel mailing list