[PATCH v2 07/10] KVM: arm/arm64: vgic: Allow HW interrupts to be queued to a guest
Marc Zyngier
marc.zyngier at arm.com
Tue Jul 21 10:21:02 PDT 2015
On 17/07/15 22:56, Christoffer Dall wrote:
> On Wed, Jul 08, 2015 at 06:56:39PM +0100, Marc Zyngier wrote:
>> To allow a HW interrupt to be injected into a guest, we lookup the
>> guest virtual interrupt in the irq_phys_map rbtree, and if we have
>
> s/rbtree/list/
>
>> a match, encode both interrupts in the LR.
>>
>> We also mark the interrupt as "active" at the host distributor level.
>>
>> On guest EOI on the virtual interrupt, the host interrupt will be
>> deactivated.
>>
>> Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
>> ---
>> virt/kvm/arm/vgic.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++---
>> 1 file changed, 69 insertions(+), 3 deletions(-)
>>
>> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
>> index 3424329..f8582d7 100644
>> --- a/virt/kvm/arm/vgic.c
>> +++ b/virt/kvm/arm/vgic.c
>> @@ -1118,6 +1118,26 @@ static void vgic_queue_irq_to_lr(struct kvm_vcpu *vcpu, int irq,
>> if (!vgic_irq_is_edge(vcpu, irq))
>> vlr.state |= LR_EOI_INT;
>>
>> + if (vlr.irq >= VGIC_NR_SGIS) {
>> + struct irq_phys_map *map;
>> + map = vgic_irq_map_search(vcpu, irq);
>> +
>> + if (map) {
>> + int ret;
>> +
>> + BUG_ON(!map->active);
>> + vlr.hwirq = map->phys_irq;
>> + vlr.state |= LR_HW;
>> + vlr.state &= ~LR_EOI_INT;
>> +
>> + ret = irq_set_irqchip_state(map->irq,
>> + IRQCHIP_STATE_ACTIVE,
>> + true);
>
> So if we have a mapping, and the virtual interrupt is being injected,
> then we must set the state to active in the physical world, because
> otherwise the guest will just exit before processing the virtual
> interrupt, yes?
Exactly. This is what will prevent the interrupt from firing on the host
(we going back to the state the GIC would be in if we were handling this
interrupt on the host).
> I think this deserves a comment here.
Sure.
>> + vgic_irq_set_queued(vcpu, irq);
>
> And we set it queued only to avoid sampling it again and setting
> PENDING+ACTIVE, because the hardware doesn't support setting that state
> when the HW bit is set, yes?
Indeed.
> I think a comment here is warranted too.
Fair enough.
>> + WARN_ON(ret);
>> + }
>> + }
>> +
>> vgic_set_lr(vcpu, lr_nr, vlr);
>> vgic_sync_lr_elrsr(vcpu, lr_nr, vlr);
>> }
>> @@ -1342,6 +1362,35 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
>> return level_pending;
>> }
>>
>> +/* Return 1 if HW interrupt went from active to inactive, and 0 otherwise */
>
> ... also clear the active state on the physical distributor so that
> shared devices can be used in a different context. (did I get this
> right?)
You're getting good at that! ;-)
>> +static int vgic_sync_hwirq(struct kvm_vcpu *vcpu, struct vgic_lr vlr)
>> +{
>> + struct irq_phys_map *map;
>> + int ret;
>> +
>> + if (!(vlr.state & LR_HW))
>> + return 0;
>> +
>> + map = vgic_irq_map_search(vcpu, vlr.irq);
>> + BUG_ON(!map || !map->active);
>> +
>> + ret = irq_get_irqchip_state(map->irq,
>> + IRQCHIP_STATE_ACTIVE,
>> + &map->active);
>> +
>> + WARN_ON(ret);
>> +
>> + if (map->active) {
>> + ret = irq_set_irqchip_state(map->irq,
>> + IRQCHIP_STATE_ACTIVE,
>> + false);
>> + WARN_ON(ret);
>> + return 0;
>> + }
>> +
>> + return 1;
>> +}
>> +
>> /* Sync back the VGIC state after a guest run */
>> static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
>> {
>> @@ -1356,14 +1405,31 @@ static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
>> elrsr = vgic_get_elrsr(vcpu);
>> elrsr_ptr = u64_to_bitmask(&elrsr);
>>
>> - /* Clear mappings for empty LRs */
>> - for_each_set_bit(lr, elrsr_ptr, vgic->nr_lr) {
>> + /* Deal with HW interrupts, and clear mappings for empty LRs */
>> + for (lr = 0; lr < vgic->nr_lr; lr++) {
>> struct vgic_lr vlr;
>>
>> - if (!test_and_clear_bit(lr, vgic_cpu->lr_used))
>> + if (!test_bit(lr, vgic_cpu->lr_used))
>> continue;
>>
>> vlr = vgic_get_lr(vcpu, lr);
>> + if (vgic_sync_hwirq(vcpu, vlr)) {
>> + /*
>> + * So this is a HW interrupt that the guest
>> + * EOI-ed. Clean the LR state and allow the
>> + * interrupt to be queued again.
>
> s/queued/sampled/ ?
Indeed.
>> + */
>> + vlr.state = 0;
>> + vlr.hwirq = 0;
>> + vgic_set_lr(vcpu, lr, vlr);
>> + vgic_irq_clear_queued(vcpu, vlr.irq);
>> + set_bit(lr, elrsr_ptr);
>> + }
>> +
>> + if (!test_bit(lr, elrsr_ptr))
>> + continue;
>> +
>> + clear_bit(lr, vgic_cpu->lr_used);
>>
>> BUG_ON(vlr.irq >= dist->nr_irqs);
>> vgic_cpu->vgic_irq_lr_map[vlr.irq] = LR_EMPTY;
>> --
>> 2.1.4
>>
> Thanks,
> -Christoffer
>
Thanks,
M.
--
Jazz is not dead. It just smells funny...
More information about the linux-arm-kernel
mailing list