[PATCH v4] clk: at91: add generated clock driver
Nicolas Ferre
nicolas.ferre at atmel.com
Thu Jul 30 03:41:07 PDT 2015
Le 29/07/2015 09:15, Boris Brezillon a écrit :
> Hi Nicolas,
>
> On Tue, 28 Jul 2015 18:08:05 +0200
> Nicolas Ferre <nicolas.ferre at atmel.com> wrote:
>
>
>> +static void clk_generated_startup(struct clk_generated *gck)
>> +{
>> + struct at91_pmc *pmc = gck->pmc;
>> + u32 tmp;
>> +
>> + pmc_lock(pmc);
>> + pmc_write(pmc, AT91_PMC_PCR, (gck->id & AT91_PMC_PCR_PID_MASK));
>> + tmp = pmc_read(pmc, AT91_PMC_PCR);
>> + pmc_unlock(pmc);
>> +
>> + gck->parent_id = (tmp & AT91_PMC_PCR_GCKCSS_MASK)
>> + >> AT91_PMC_PCR_GCKCSS_OFFSET;
>> + /*
>> + * make sure that what we read in hardware is coherent with
>> + * what we've just probed
>> + */
>> + if (gck->parent_id >= __clk_get_num_parents(gck->hw.clk))
>> + gck->parent_id = 0;
>
> Hm, I'm not sure this is correct. Here, you're just faking the
> fact that your current parent is the first one in the parent list while
> it actually points to the 6th entry. Not only your rate will be false
> (the one calculated in ->round_rate()), but you're also changing the
> behavior of the clk_set_rate() and clk_set_parent() operation (AFAIR,
> if you try to change to the first parent, the core code will think it's
> already properly configured and will never call ->set_parent()).
Well, as the values are actually used from the cached local structure
all the way to the "enable" function, I suspect it won't break the core
behavior. And making sure that this clock is not enabled before Linux is
run makes this change work.
But I admit it is somehow weird, as a workaround :-\
> This leaves 2 solutions here:
> - implement the missing clk driver and add an entry in the parent
> list
Yes, I'll do this.
> - select the 1st parent clk (I mean, change the register value) if the
> hardware points to the 6th one.
This is not safer than what I proposed hereunder.
So, I remove this change in the v4 and send you a v5 that reverts this
modification and adds a WARN_ON the condition, to ease debugging...
Bye,
--
Nicolas Ferre
More information about the linux-arm-kernel
mailing list