[PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board

[Krzysztof Kozlowski]

On 07.07.2015 23:40, Kukjin Kim wrote:
> Krzysztof Kozlowski wrote:
>>
>> 2015-07-02 16:17 GMT+09:00 Krzysztof Kozlowski <k.kozlowski at samsung.com>:
>>> On 02.07.2015 15:11, Chanwoo Choi wrote:
>>>> On 07/02/2015 02:54 PM, Krzysztof Kozlowski wrote:
>>>>> On 02.07.2015 14:37, Chanwoo Choi wrote:
>>>>>> This patch add the cooling device to control the overheating issue on
>>>>>> Exynos3250-based Rinato/Monk board.
>>>>>>
>>>>>> Cc: Kukjin Kim <kgene at kernel.org>
>>>>>> Cc: Krzysztof Kozlowski <k.kozlowski at samsung.com>
>>>>>> Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
>>>>>> Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
>>>>>> ---
>>>>>> Depends on:
>>>>>> This patch needs the cpufreq support of Exynos3250 SoC. So, this patch has the
>>>>>> dependency on patch[1] which support the generic cpufreq for Exynos3250 SoC.
>>>>>> [1] https://lkml.org/lkml/2015/7/1/696
>>>>>>     : [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250
>>>>>>
>>>>>>  arch/arm/boot/dts/exynos3250-monk.dts   | 15 +++++++++++++++
>>>>>>  arch/arm/boot/dts/exynos3250-rinato.dts | 15 +++++++++++++++
>>>>>>  arch/arm/boot/dts/exynos3250.dtsi       |  1 +
>>>>>>  3 files changed, 31 insertions(+)
>>>>>>
>>>>>> diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
>>>>>> index 7863265d4868..540a0adf2be6 100644
>>>>>> --- a/arch/arm/boot/dts/exynos3250-monk.dts
>>>>>> +++ b/arch/arm/boot/dts/exynos3250-monk.dts
>>>>>> @@ -116,6 +116,21 @@
>>>>>>             min-microvolt = <1100000>;
>>>>>>             max-microvolt = <2700000>;
>>>>>>     };
>>>>>> +
>>>>>> +   thermal-zones {
>>>>>> +           cpu_thermal: cpu-thermal {
>>>>>> +                   cooling-maps {
>>>>>> +                           map0 {
>>>>>> +                                   /* Correspond to 500MHz at freq_table */
>>>>>> +                                   cooling-device = <&cpu0 5 5>;
>>>>>> +                           };
>>>>>> +                           map1 {
>>>>>> +                                   /* Correspond to 200MHz at freq_table */
>>>>>> +                                   cooling-device = <&cpu0 8 8>;
>>>>>> +                           };
>>>>>> +                   };
>>>>>> +           };
>>>>>> +   };
>>>>>>  };
>>>>>>
>>>>>>  &adc {
>>>>>> diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
>>>>>> index ddd7ac283045..0e62a6435e07 100644
>>>>>> --- a/arch/arm/boot/dts/exynos3250-rinato.dts
>>>>>> +++ b/arch/arm/boot/dts/exynos3250-rinato.dts
>>>>>> @@ -107,6 +107,21 @@
>>>>>>             min-microvolt = <1100000>;
>>>>>>             max-microvolt = <2700000>;
>>>>>>     };
>>>>>> +
>>>>>> +   thermal-zones {
>>>>>> +           cpu_thermal: cpu-thermal {
>>>>>> +                   cooling-maps {
>>>>>> +                           map0 {
>>>>>> +                                   /* Corresponds to 500MHz */
>>>>>> +                                   cooling-device = <&cpu0 5 5>;
>>>>>> +                           };
>>>>>> +                           map1 {
>>>>>> +                                   /* Corresponds to 200MHz */
>>>>>> +                                   cooling-device = <&cpu0 8 8>;
>>>>>> +                           };
>>>>>> +                   };
>>>>>> +           };
>>>>>> +   };
>>>>>>  };
>>>>>>
>>>>>>  &adc {
>>>>>> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
>>>>>> index e0f3b2ed41a3..a4931b660ddb 100644
>>>>>> --- a/arch/arm/boot/dts/exynos3250.dtsi
>>>>>> +++ b/arch/arm/boot/dts/exynos3250.dtsi
>>>>>> @@ -55,6 +55,7 @@
>>>>>>                     clock-frequency = <1000000000>;
>>>>>>                     clocks = <&cmu CLK_ARM_CLK>;
>>>>>>                     clock-names = "cpu";
>>>>>> +                   #cooling-cells = <2>;
>>>>>>
>>>>>
>>>>> Don't you need also cooling-{min,max}-state properties?
>>>>
>>>> Yes, it is well working without cooling-{min,max}-state or cooling-{min,max}-level.
>>>>
>>>> I look for the some code to parse "cooling-{min,max}-state or cooling-{min,max}-level"
>>>> in drivers/thermal/*. But, there are no any code to parse it.
>>>>
>>>> But, Documentation/devicetree/bindings/thermal/thermal.txt contains just the 'cooling-{min,max}-
>> state.
>>>>
>>>> I think that there are mismatch between document and thermal core driver.
>>>
>>> Thanks for explanation, looks good.
>>> Acked-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
>>>
>>> Best regards,
>>> Krzysztof
>>
>> Dear Kukjin,
>>
>> Recent four patchsets (4210 CPU OPP in DTS, cpufreq-dt 5250,
>> cpufreq-dt 3250, this patch) are actually an one continuous chain.
>> Dependencies are already in mainline. Are you gonna to pick up
>> everything?
>>
> Yes, I want and I will. BTW maybe clk change is required together? If so, as you
> know we need to get ack from clk guy. Is my understanding right?

Right. I think the samsung clock and cpufreq patches still need acks.

Best regards,
Krzysztof