[PATCH v3] mfd: atmel-hlcdc: implement config synchronization

Nicolas Ferre nicolas.ferre at atmel.com
Fri Jul 17 04:56:20 PDT 2015


Le 07/07/2015 19:16, Boris Brezillon a écrit :
> Some HLCDC registers cannot be written until the hardware has finished
> applying the previous configuration request. If they are written while
> an action is still in progress, the new configuration might be silently
> ignored, resulting in unpredictable behavior.
> 
> Hide the config synchronization stuff in a regmap implementation and use
> this implementation instead of the generic mmio one.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>

Yes, that implements the needed behavior for these registers...
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

Thanks. Bye,

> ---
> Changes since v2:
>  - reword the commit message
> 
> Changes since v1:
>  - add a 100 usec timeout
> ---
>  drivers/mfd/atmel-hlcdc.c | 35 +++++++++++++++++++++++++++++++++--
>  1 file changed, 33 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mfd/atmel-hlcdc.c b/drivers/mfd/atmel-hlcdc.c
> index cfd58f4..04e01cc 100644
> --- a/drivers/mfd/atmel-hlcdc.c
> +++ b/drivers/mfd/atmel-hlcdc.c
> @@ -18,6 +18,7 @@
>   */
>  
>  #include <linux/clk.h>
> +#include <linux/iopoll.h>
>  #include <linux/mfd/atmel-hlcdc.h>
>  #include <linux/mfd/core.h>
>  #include <linux/module.h>
> @@ -37,11 +38,41 @@ static const struct mfd_cell atmel_hlcdc_cells[] = {
>  	},
>  };
>  
> +static int regmap_atmel_hlcdc_reg_write(void *context, unsigned int reg,
> +					unsigned int val)
> +{
> +	void __iomem *regs = context;
> +
> +	if (reg <= ATMEL_HLCDC_DIS) {
> +		u32 status;
> +
> +		readl_poll_timeout(regs + ATMEL_HLCDC_SR, status,
> +				   !(status & ATMEL_HLCDC_SIP), 1, 100);
> +	}
> +
> +	writel(val, regs + reg);
> +
> +	return 0;
> +}
> +
> +static int regmap_atmel_hlcdc_reg_read(void *context, unsigned int reg,
> +				       unsigned int *val)
> +{
> +	void __iomem *regs = context;
> +
> +	*val = readl(regs + reg);
> +
> +	return 0;
> +}
> +
>  static const struct regmap_config atmel_hlcdc_regmap_config = {
>  	.reg_bits = 32,
>  	.val_bits = 32,
>  	.reg_stride = 4,
>  	.max_register = ATMEL_HLCDC_REG_MAX,
> +	.reg_write = regmap_atmel_hlcdc_reg_write,
> +	.reg_read = regmap_atmel_hlcdc_reg_read,
> +	.fast_io = true,
>  };
>  
>  static int atmel_hlcdc_probe(struct platform_device *pdev)
> @@ -82,8 +113,8 @@ static int atmel_hlcdc_probe(struct platform_device *pdev)
>  		return PTR_ERR(hlcdc->slow_clk);
>  	}
>  
> -	hlcdc->regmap = devm_regmap_init_mmio(dev, regs,
> -					      &atmel_hlcdc_regmap_config);
> +	hlcdc->regmap = devm_regmap_init(dev, NULL, regs,
> +					 &atmel_hlcdc_regmap_config);
>  	if (IS_ERR(hlcdc->regmap))
>  		return PTR_ERR(hlcdc->regmap);
>  
> 


-- 
Nicolas Ferre



More information about the linux-arm-kernel mailing list