[PATCH 1/1] ARM: dts: vfxxx: Include support for esdhc0 functionality.

[Cory Tusar]

Extend the existing Vybrid eSDHC devicetree implementation to also
describe the esdhc0 functional block.

Tested on a custom VF610-based board with a Toshiba THGBM1G5D2EBAI7 eMMC
module attached to esdhc0.

Signed-off-by: Cory Tusar <cory.tusar at pid1solutions.com>
---
 arch/arm/boot/dts/vfxxx.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 4aa3351..7e97017 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -445,6 +445,17 @@
 				status = "disabled";
 			};
 
+			esdhc0: esdhc at 400b1000 {
+				compatible = "fsl,imx53-esdhc";
+				reg = <0x400b1000 0x1000>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_IPG_BUS>,
+					<&clks VF610_CLK_PLATFORM_BUS>,
+					<&clks VF610_CLK_ESDHC0>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
 			esdhc1: esdhc at 400b2000 {
 				compatible = "fsl,imx53-esdhc";
 				reg = <0x400b2000 0x1000>;
-- 
2.3.6