[PATCH v2] ARM: dts: rockchip: Add veyron-speedy board

Heiko Stübner heiko at sntech.de
Thu Jul 23 13:21:17 PDT 2015


Hi Romain,

I've applied the patch to my dts branch for 4.3 after fixing some smallish 
issues:


Am Donnerstag, 23. Juli 2015, 18:50:49 schrieb Romain Perier:
> Which is formally known as The Asus C201 chromebook

						^ typo the with small "t"

> 
> Signed-off-by: Romain Perier <romain.perier at gmail.com>
> Reviewed-by: Doug Anderson <dianders at chromium.org>
> ---
> 
> Changes in v2:
>  - Remove dvs-gpio (not used in mainline yet)
>  - Remove edp subnode in pinctrl (not used in mainline yet)
>  - Reordering disable-wp correctly
> 
>  Documentation/devicetree/bindings/arm/rockchip.txt |  10 +-
>  arch/arm/boot/dts/Makefile                         |   3 +-
>  arch/arm/boot/dts/rk3288-veyron-speedy.dts         | 155
> +++++++++++++++++++++ 3 files changed, 166 insertions(+), 2 deletions(-)
>  create mode 100644 arch/arm/boot/dts/rk3288-veyron-speedy.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
> b/Documentation/devicetree/bindings/arm/rockchip.txt index
> 6de18bd2..da02022 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -37,4 +37,12 @@ Rockchip platforms device tree bindings
>  - Google Pinky (dev-board):
>      Required root node properties:
>        - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
> -		     "google,veyron", "rockchip,rk3288";
> \ No newline at end of file
> +		     "google,veyron", "rockchip,rk3288";
> +
> +- Google Speedy (Asus C201 Chromebook):
> +    Required root node properties:
> +      - compatible = "google,veyron-speedy-rev9",
> "google,veyron-speedy-rev8", +		     "google,veyron-speedy-rev7",
> "google,veyron-speedy-rev6",
> +		     "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
> +		     "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
> +		     "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4993b3b..bf5225a 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -490,7 +490,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
>  	rk3288-firefly-beta.dtb \
>  	rk3288-firefly.dtb \
>  	rk3288-veyron-jerry.dtb \
> -	rk3288-veyron-pinky.dtb
> +	rk3288-veyron-pinky.dtb \
> +	rk3288-veyron-speedy.dtb
>  dtb-$(CONFIG_ARCH_S3C24XX) += \
>  	s3c2416-smdk2416.dtb
>  dtb-$(CONFIG_ARCH_S3C64XX) += \

both the board description as well as the Makefile did not apply cleanly, as 
you seem to have based it on some unknown branch.
Please try to base patches on either linux-next or my version specific topic 
branch - v4.3-armsoc/dts in this case.


> diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
> b/arch/arm/boot/dts/rk3288-veyron-speedy.dts new file mode 100644
> index 0000000..fdb2a73
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
> @@ -0,0 +1,155 @@
> +/*
> + * Google Veyron Speedy Rev 1+ board device tree source
> + *
> + * Copyright 2015 Google, Inc
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + *  Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "rk3288-veyron-chromebook.dtsi"
> +#include "cros-ec-sbs.dtsi"
> +
> +/ {
> +	model = "Google Speedy";
> +	compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
> +		     "google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
> +		     "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
> +		     "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
> +		     "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
> +
> +	panel_regulator: panel-regulator {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&lcd_enable_h>;
> +		regulator-name = "panel_regulator";
> +		vin-supply = <&vcc33_sys>;
> +	};
> +
> +	vcc18_lcd: vcc18-lcd {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&avdd_1v8_disp_en>;
> +		regulator-name = "vcc18_lcd";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		vin-supply = <&vcc18_wl>;
> +	};
> +
> +	backlight_regulator: backlight-regulator {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&bl_pwr_en>;
> +		regulator-name = "backlight_regulator";
> +		vin-supply = <&vcc33_sys>;
> +		startup-delay-us = <15000>;
> +	};
> +};
> +
> +&rk808 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;

removed the dvs_1 and dvs_2 pinctrl accesses here.

The pin definitions below are staying, but I'd like to completely keep from 
using the pins until the support lands. The binding change seems to have made 
it today, but I'd like to wait until the regulator change also gets accepted 
too.


Heiko



More information about the linux-arm-kernel mailing list