[PATCH v2 06/20] ARM: DTS: am43xx-epos-evm: McASP1 node for audio support

[Peter Ujfalusi]

Add node for McASP1 along with the needed pinctrl entries.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
 arch/arm/boot/dts/am43x-epos-evm.dts | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 9b584d1e0232..11fced01975d 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -317,6 +317,24 @@
 				0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 			>;
 		};
+
+		mcasp1_pins: mcasp1_pins {
+			pinctrl-single,pins = <
+				0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
+				0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
+				0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
+				0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
+			>;
+		};
+
+		mcasp1_sleep_pins: mcasp1_sleep_pins {
+			pinctrl-single,pins = <
+				0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
 };
 
 &mmc1 {
@@ -706,3 +724,20 @@
 		};
 	};
 };
+
+&mcasp1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_sleep_pins>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
-- 
2.4.5