[PATCH] thermal: consistently use int for temperatures
Jean Delvare
jdelvare at suse.de
Mon Jul 6 03:25:15 PDT 2015
On Mon, 6 Jul 2015 09:19:49 +0200, Sascha Hauer wrote:
> The thermal code uses int, long and unsigned long for temperatures
> in different places.
>
> Using an unsigned type limits the thermal framework to positive
> temperatures without need. Also several drivers currently will report
> temperatures near UINT_MAX for temperatures below 0°C. This will probably
> immediately shut the machine down due to overtemperature if started below
> 0°C.
>
> 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC
> is above the melting point of all known materials.
>
> Consistently use a plain 'int' for temperatures throughout the thermal code and
> the drivers. This only changes the places in the drivers where the temperature
> is passed around as pointer, when drivers internally use another type this is
> not changed.
>
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> Cc: Zhang Rui <rui.zhang at intel.com>
> Cc: Eduardo Valentin <edubezval at gmail.com>
> Cc: linux-pm at vger.kernel.org
> Cc: linux-kernel at vger.kernel.org
> Cc: Jean Delvare <jdelvare at suse.de>
> Cc: Peter Feuerer <peter at piie.net>
> Cc: Heiko Stuebner <heiko at sntech.de>
> Cc: Lukasz Majewski <l.majewski at samsung.com>
> Cc: Stephen Warren <swarren at wwwdotorg.org>
> Cc: Thierry Reding <thierry.reding at gmail.com>
> Cc: linux-acpi at vger.kernel.org
> Cc: platform-driver-x86 at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-omap at vger.kernel.org
> Cc: linux-samsung-soc at vger.kernel.org
> Cc: Guenter Roeck <linux at roeck-us.net>
> Cc: Rafael J. Wysocki <rjw at rjwysocki.net>
> Cc: Maxime Ripard <maxime.ripard at free-electrons.com>
> Cc: Darren Hart <dvhart at infradead.org>
> Cc: lm-sensors at lm-sensors.org
> ---
> drivers/acpi/thermal.c | 12 +++++-----
> drivers/hwmon/lm75.c | 2 +-
> drivers/hwmon/ntc_thermistor.c | 2 +-
> drivers/hwmon/tmp102.c | 2 +-
> drivers/input/touchscreen/sun4i-ts.c | 8 +++----
> drivers/platform/x86/acerhdf.c | 9 ++++----
> drivers/platform/x86/intel_mid_thermal.c | 9 ++++----
> drivers/power/power_supply_core.c | 2 +-
> drivers/thermal/armada_thermal.c | 2 +-
> drivers/thermal/db8500_thermal.c | 7 +++---
> drivers/thermal/dove_thermal.c | 2 +-
> drivers/thermal/fair_share.c | 2 +-
> drivers/thermal/gov_bang_bang.c | 5 ++--
> drivers/thermal/hisi_thermal.c | 4 ++--
> drivers/thermal/imx_thermal.c | 27 +++++++++++-----------
> drivers/thermal/int340x_thermal/int3400_thermal.c | 2 +-
> .../thermal/int340x_thermal/int340x_thermal_zone.c | 10 ++++----
> .../thermal/int340x_thermal/int340x_thermal_zone.h | 8 +++----
> .../int340x_thermal/processor_thermal_device.c | 4 ++--
> drivers/thermal/intel_quark_dts_thermal.c | 13 +++++------
> drivers/thermal/intel_soc_dts_iosf.c | 8 +++----
> drivers/thermal/kirkwood_thermal.c | 2 +-
> drivers/thermal/of-thermal.c | 14 +++++------
> drivers/thermal/power_allocator.c | 16 ++++++-------
> drivers/thermal/qcom-spmi-temp-alarm.c | 2 +-
> drivers/thermal/rcar_thermal.c | 7 +++---
> drivers/thermal/rockchip_thermal.c | 10 ++++----
> drivers/thermal/samsung/exynos_tmu.c | 23 +++++++++---------
> drivers/thermal/spear_thermal.c | 2 +-
> drivers/thermal/st/st_thermal.c | 5 ++--
> drivers/thermal/step_wise.c | 4 ++--
> drivers/thermal/tegra_soctherm.c | 4 ++--
> drivers/thermal/thermal_core.c | 26 ++++++++++-----------
> drivers/thermal/thermal_hwmon.c | 10 ++++----
> drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 10 ++++----
> drivers/thermal/x86_pkg_temp_thermal.c | 10 ++++----
> include/linux/thermal.h | 26 +++++++++------------
> 37 files changed, 148 insertions(+), 163 deletions(-)
> (...)
No objection from me.
For the hwmon parts:
Reviewed-by: Jean Delvare <jdelvare at suse.de>
--
Jean Delvare
SUSE L3 Support
More information about the linux-arm-kernel
mailing list