[PATCH v2 0/4] mtd: pxa3xx_nand: rework the timing setup

[Robert Jarzmik]

Ezequiel Garcia <ezequiel at vanguardiasur.com.ar> writes:

> Here you go:
>
> http://git.infradead.org/users/ezequielg/linux/shortlog/refs/heads/pxa3xx-nand-timing-rework-v2

Okay, I've tested this on cm-x300. The result is not bright :
	nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc
	nand: Samsung NAND 512MiB 3,3V 8-bit
	nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
	pxa3xx-nand pxa3xx-nand: ECC strength 1, ECC step size 512
	Scanning device for bad blocks
	random: nonblocking pool is initialized
	Bad eraseblock 1037 at 0x0000081a0000
	Creating 6 MTD partitions on "pxa3xx_nand-0":
	0x000000000000-0x000000040000 : "OBM"
	0x000000040000-0x000000080000 : "U-Boot"
	0x000000080000-0x0000000c0000 : "Environment"
	0x0000000c0000-0x000000200000 : "reserved"
	0x000000200000-0x000000600000 : "kernel"
	0x000000600000-0x000020000000 : "fs"

The bad black is not bad normally.
And then :
	# dd if=/dev/mtd0 of=toto count=1
	pxa3xx-nand pxa3xx-nand: Wait time out!!!
	1+0 records in
	1+0 records out
	# ls -l toto
	-rw-r--r--    1 root     root           512 Jan  1 00:02 toto
	# hexdump-C toto
	00000000  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
	*
	00000200

That's not possible, as it should have dumped the OBMI.

And yet, I hesitate to incriminate this patchset, I will try without it. It wont
be very fast, as my USB to serial converter just broke, and my order will take a
couple of days to complete.

And of course without this converter I cannot test anymore, especially the
zylonite board which will be more interesting.

So I'll report back as soon as the UK mail has completed the shipment.

Cheers.

-- 
Robert