[PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family

[Vaibhav Hiremath]

On Monday 29 June 2015 02:22 PM, Vaibhav Hiremath wrote:
>
>
> On Monday 15 June 2015 09:19 PM, Vaibhav Hiremath wrote:
>> This patch series fixes bugs/warnings, cleans up the code and adds
>> support for PXA910 family of devices to PXA I2C bus driver.
>>
>> There has been one attempt made sometime back in 2012 to upstream
>> some of the patches from below list, but did not get follow up later.
>> I have consolidated all the patches, cleaned them up, splited into
>> logical changes, added new patches and submitting it now.
>>
>> I tried to maintain authorship & Signoff except where I did some
>> significant changes to the code/logic.
>>
>> Link to previous post:
>> http://permalink.gmane.org/gmane.linux.drivers.i2c/13557
>>
>> Testing:
>>    - Basic testing on PMIC device on I2C-0 interface
>>    - Boot tested on platform based on PXA1928
>>    - Probe is successfully passing
>>    - Read few registers of PMIC (RTC, ID, etc...) during boot
>>
>>
>> V1 => V2:
>> ========
>
> Ping !!!
>

If there are no review comments on this series, can it be merged?

Thanks,
Vaibhav

>
> Thanks,
> Vaibhav
>
>
>
>> Link to V1 -
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-May/347012.html
>>
>>
>>    - Fixed all comments from "Robert Jarzmik" and "Wolfram Sang"
>>    - Dropped Patch
>>     05/12: using core bus reset implementation - under work.
>>                 Will submit shortly.
>>     08/12: NAKed and dropped
>>    - Seperated DT binding patch from driver changes, for easy merge
>>
>>
>> Leilei Shang (1):
>>    i2c: pxa: keep i2c irq ON in suspend
>>
>> Shouming Wang (1):
>>    i2c: pxa: Return I2C_RETRY when timeout in pio mode
>>
>> Vaibhav Hiremath (8):
>>    i2c: pxa: No need to set slave addr for i2c master mode reset
>>    i2c: pxa: Reset i2c controller on timeout in interrupt and pio mode
>>    i2c: pxa: Update debug function to dump more info on error
>>    i2c:pxa: Use devm_ variants in probe function
>>    Documentation: binding: add new property 'disable_after_xfer' to
>>      i2c-pxa
>>    i2c: pxa: Add support for pxa910/988 & new configuration features
>>    i2c: pxa: Add ILCR (tLow & tHigh) configuration support
>>    Documentation: binding: add sclk adjustment properties to i2c-pxa
>>
>> Yi Zhang (1):
>>    i2c: pxa: enable/disable i2c module across msg xfer
>>
>> Yipeng Yao (1):
>>    i2c: pxa: Remove compile warnning in 64bit mode
>>
>>   Documentation/devicetree/bindings/i2c/i2c-pxa.txt |  18 ++
>>   drivers/i2c/busses/i2c-pxa.c                      | 267
>> ++++++++++++++++------
>>   2 files changed, 220 insertions(+), 65 deletions(-)
>>