[PATCH v3 02/16] clk: shmobile: r8a7778: Add CPG/MSTP Clock Domain support

Geert Uytterhoeven geert+renesas at glider.be
Wed Jul 1 08:57:56 PDT 2015


Add Clock Domain support to the R-Car M1A Clock Pulse Generator (CPG)
driver using the generic PM Domain.  This allows to power-manage the
module clocks of SoC devices that are part of the CPG/MSTP Clock Domain
using Runtime PM, or for system suspend/resume.

SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a proper
"power-domains" property.

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
Acked-by: Stephen Boyd <sboyd at codeaurora.org>
---
v3:
  - Add Acked-by,
  - Use "CPG/MSTP Clock Domain" instead of "CPG Clock Domain",

v2:
  - New.
---
 .../bindings/clock/renesas,r8a7778-cpg-clocks.txt  | 29 +++++++++++++++++++---
 arch/arm/mach-shmobile/Kconfig                     |  1 +
 drivers/clk/shmobile/clk-r8a7778.c                 |  2 ++
 3 files changed, 29 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
index 2f3747fdcf1c5305..e4cdaf1cb3333012 100644
--- a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
@@ -1,7 +1,9 @@
 * Renesas R8A7778 Clock Pulse Generator (CPG)
 
 The CPG generates core clocks for the R8A7778. It includes two PLLs and
-several fixed ratio dividers
+several fixed ratio dividers.
+The CPG also provides a Clock Domain for SoC devices, in combination with the
+CPG Module Stop (MSTP) Clocks.
 
 Required Properties:
 
@@ -10,10 +12,18 @@ Required Properties:
   - #clock-cells: Must be 1
   - clock-output-names: The names of the clocks. Supported clocks are
     "plla", "pllb", "b", "out", "p", "s", and "s1".
+  - #power-domain-cells: Must be 0
 
+SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
+through an MSTP clock should refer to the CPG device node in their
+"power-domains" property, as documented by the generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
 
-Example
--------
+
+Examples
+--------
+
+  - CPG device node:
 
 	cpg_clocks: cpg_clocks at ffc80000 {
 		compatible = "renesas,r8a7778-cpg-clocks";
@@ -22,4 +32,17 @@ Example
 		clocks = <&extal_clk>;
 		clock-output-names = "plla", "pllb", "b",
 				     "out", "p", "s", "s1";
+		#power-domain-cells = <0>;
+	};
+
+
+  - CPG/MSTP Clock Domain member device node:
+
+	sdhi0: sd at ffe4c000 {
+		compatible = "renesas,sdhi-r8a7778";
+		reg = <0xffe4c000 0x100>;
+		interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
 	};
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 85d669f14929e365..cb525fea87367321 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -4,6 +4,7 @@ config ARCH_SHMOBILE
 
 config PM_RCAR
 	bool
+	select PM_GENERIC_DOMAINS if PM
 
 config PM_RMOBILE
 	bool
diff --git a/drivers/clk/shmobile/clk-r8a7778.c b/drivers/clk/shmobile/clk-r8a7778.c
index cb33b57274bf9f55..fa45684e220c78ae 100644
--- a/drivers/clk/shmobile/clk-r8a7778.c
+++ b/drivers/clk/shmobile/clk-r8a7778.c
@@ -124,6 +124,8 @@ static void __init r8a7778_cpg_clocks_init(struct device_node *np)
 	}
 
 	of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
+
+	cpg_mstp_add_clk_domain(np);
 }
 
 CLK_OF_DECLARE(r8a7778_cpg_clks, "renesas,r8a7778-cpg-clocks",
-- 
1.9.1




More information about the linux-arm-kernel mailing list