[PATCH 1/2] ARM: integrator: move framebuffers to driver
Linus Walleij
linus.walleij at linaro.org
Wed Jul 29 05:27:11 PDT 2015
Commit 11c32d7b6274cb0f554943d65bd4a126c4a86dcd
"video: move Versatile CLCD helpers" already moved the
CLCD mode setting helpers for Versatile and Integrator/CP
to drivers/video/fbdev. Let's do the same for the IM-PD1
add-on board, copy the missing displays into the database
and simplify the code.
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
FBDEV maintainers: requesting your ACK so I can take this into
the ARM SoC tree.
---
arch/arm/mach-integrator/impd1.c | 181 +++---------------------------
drivers/video/fbdev/amba-clcd-versatile.c | 80 +++++++++++++
2 files changed, 94 insertions(+), 167 deletions(-)
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 38b0da300dd5..f164643b7c59 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -20,6 +20,7 @@
#include <linux/mm.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
+#include <linux/platform_data/video-clcd-versatile.h>
#include <linux/amba/mmci.h>
#include <linux/amba/pl061.h>
#include <linux/io.h>
@@ -64,131 +65,6 @@ static struct mmci_platform_data mmc_data = {
/*
* CLCD support
*/
-#define PANEL PROSPECTOR
-
-#define LTM10C209 1
-#define PROSPECTOR 2
-#define SVGA 3
-#define VGA 4
-
-#if PANEL == VGA
-#define PANELTYPE vga
-static struct clcd_panel vga = {
- .mode = {
- .name = "VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 39721,
- .left_margin = 40,
- .right_margin = 24,
- .upper_margin = 32,
- .lower_margin = 11,
- .hsync_len = 96,
- .vsync_len = 2,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_BCD | TIM2_IPC,
- .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
- .caps = CLCD_CAP_5551,
- .connector = IMPD1_CTRL_DISP_VGA,
- .bpp = 16,
- .grayscale = 0,
-};
-
-#elif PANEL == SVGA
-#define PANELTYPE svga
-static struct clcd_panel svga = {
- .mode = {
- .name = "SVGA",
- .refresh = 0,
- .xres = 800,
- .yres = 600,
- .pixclock = 27778,
- .left_margin = 20,
- .right_margin = 20,
- .upper_margin = 5,
- .lower_margin = 5,
- .hsync_len = 164,
- .vsync_len = 62,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_BCD,
- .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
- .connector = IMPD1_CTRL_DISP_VGA,
- .caps = CLCD_CAP_5551,
- .bpp = 16,
- .grayscale = 0,
-};
-
-#elif PANEL == PROSPECTOR
-#define PANELTYPE prospector
-static struct clcd_panel prospector = {
- .mode = {
- .name = "PROSPECTOR",
- .refresh = 0,
- .xres = 640,
- .yres = 480,
- .pixclock = 40000,
- .left_margin = 33,
- .right_margin = 64,
- .upper_margin = 36,
- .lower_margin = 7,
- .hsync_len = 64,
- .vsync_len = 25,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_BCD,
- .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
- .caps = CLCD_CAP_5551,
- .fixedtimings = 1,
- .connector = IMPD1_CTRL_DISP_LCD,
- .bpp = 16,
- .grayscale = 0,
-};
-
-#elif PANEL == LTM10C209
-#define PANELTYPE ltm10c209
-/*
- * Untested.
- */
-static struct clcd_panel ltm10c209 = {
- .mode = {
- .name = "LTM10C209",
- .refresh = 0,
- .xres = 640,
- .yres = 480,
- .pixclock = 40000,
- .left_margin = 20,
- .right_margin = 20,
- .upper_margin = 19,
- .lower_margin = 19,
- .hsync_len = 20,
- .vsync_len = 10,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_BCD,
- .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
- .caps = CLCD_CAP_5551,
- .fixedtimings = 1,
- .connector = IMPD1_CTRL_DISP_LCD,
- .bpp = 16,
- .grayscale = 0,
-};
-#endif
-
/*
* Disable all display connectors on the interface module.
*/
@@ -206,51 +82,22 @@ static void impd1fb_clcd_enable(struct clcd_fb *fb)
fb->panel->connector | IMPD1_CTRL_DISP_ENABLE);
}
-static int impd1fb_clcd_setup(struct clcd_fb *fb)
-{
- unsigned long framebase = fb->dev->res.start + 0x01000000;
- unsigned long framesize = SZ_1M;
- int ret = 0;
+#define PANEL "PROSPECTOR"
- fb->panel = &PANELTYPE;
-
- if (!request_mem_region(framebase, framesize, "clcd framebuffer")) {
- printk(KERN_ERR "IM-PD1: unable to reserve framebuffer\n");
- return -EBUSY;
- }
-
- fb->fb.screen_base = ioremap(framebase, framesize);
- if (!fb->fb.screen_base) {
- printk(KERN_ERR "IM-PD1: unable to map framebuffer\n");
- ret = -ENOMEM;
- goto free_buffer;
- }
-
- fb->fb.fix.smem_start = framebase;
- fb->fb.fix.smem_len = framesize;
-
- return 0;
-
- free_buffer:
- release_mem_region(framebase, framesize);
- return ret;
-}
-
-static int impd1fb_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+static int impd1fb_clcd_setup(struct clcd_fb *fb)
{
- unsigned long start, size;
+ fb->panel = versatile_clcd_get_panel(PANEL);
- start = vma->vm_pgoff + (fb->fb.fix.smem_start >> PAGE_SHIFT);
- size = vma->vm_end - vma->vm_start;
+ if (!fb->panel)
+ return -EINVAL;
- return remap_pfn_range(vma, vma->vm_start, start, size,
- vma->vm_page_prot);
-}
+ if (!strcmp(PANEL, "VGA") || !strcmp(PANEL, "SVGA") ||
+ !strcmp(PANEL, "XVGA"))
+ fb->panel->connector = IMPD1_CTRL_DISP_VGA;
+ else
+ fb->panel->connector = IMPD1_CTRL_DISP_LCD;
-static void impd1fb_clcd_remove(struct clcd_fb *fb)
-{
- iounmap(fb->fb.screen_base);
- release_mem_region(fb->fb.fix.smem_start, fb->fb.fix.smem_len);
+ return versatile_clcd_setup_dma(fb, SZ_1M);
}
static struct clcd_board impd1_clcd_data = {
@@ -261,8 +108,8 @@ static struct clcd_board impd1_clcd_data = {
.disable = impd1fb_clcd_disable,
.enable = impd1fb_clcd_enable,
.setup = impd1fb_clcd_setup,
- .mmap = impd1fb_clcd_mmap,
- .remove = impd1fb_clcd_remove,
+ .mmap = versatile_clcd_mmap_dma,
+ .remove = versatile_clcd_remove_dma,
};
struct impd1_device {
diff --git a/drivers/video/fbdev/amba-clcd-versatile.c b/drivers/video/fbdev/amba-clcd-versatile.c
index 7a8afcd4573e..293499981031 100644
--- a/drivers/video/fbdev/amba-clcd-versatile.c
+++ b/drivers/video/fbdev/amba-clcd-versatile.c
@@ -28,6 +28,31 @@ static struct clcd_panel vga = {
.bpp = 16,
};
+static struct clcd_panel svga = {
+ .mode = {
+ .name = "SVGA",
+ .refresh = 0,
+ .xres = 800,
+ .yres = 600,
+ .pixclock = 27778,
+ .left_margin = 20,
+ .right_margin = 20,
+ .upper_margin = 5,
+ .lower_margin = 5,
+ .hsync_len = 164,
+ .vsync_len = 62,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_BCD,
+ .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+ .caps = CLCD_CAP_5551,
+ .bpp = 16,
+ .grayscale = 0,
+};
+
static struct clcd_panel xvga = {
.mode = {
.name = "XVGA",
@@ -126,12 +151,67 @@ static struct clcd_panel epson_l2f50113t00 = {
.bpp = 16,
};
+static struct clcd_panel prospector = {
+ .mode = {
+ .name = "PROSPECTOR",
+ .refresh = 0,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 40000,
+ .left_margin = 33,
+ .right_margin = 64,
+ .upper_margin = 36,
+ .lower_margin = 7,
+ .hsync_len = 64,
+ .vsync_len = 25,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_BCD,
+ .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+ .caps = CLCD_CAP_5551,
+ .fixedtimings = 1,
+ .bpp = 16,
+ .grayscale = 0,
+};
+
+static struct clcd_panel ltm10c209 = {
+ .mode = {
+ .name = "LTM10C209",
+ .refresh = 0,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 40000,
+ .left_margin = 20,
+ .right_margin = 20,
+ .upper_margin = 19,
+ .lower_margin = 19,
+ .hsync_len = 20,
+ .vsync_len = 10,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_BCD,
+ .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+ .caps = CLCD_CAP_5551,
+ .fixedtimings = 1,
+ .bpp = 16,
+ .grayscale = 0,
+};
+
static struct clcd_panel *panels[] = {
&vga,
+ &svga,
&xvga,
&sanyo_tm38qv67a02a,
&sanyo_2_5_in,
&epson_l2f50113t00,
+ &prospector,
+ <m10c209,
};
struct clcd_panel *versatile_clcd_get_panel(const char *name)
--
2.4.3
More information about the linux-arm-kernel
mailing list