[PATCH v5 46/46] usb: musb: gadget: add musb_match_ep() function
Robert Baldyga
r.baldyga at samsung.com
Fri Jul 31 07:00:58 PDT 2015
Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Function does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.
Signed-off-by: Robert Baldyga <r.baldyga at samsung.com>
---
drivers/usb/gadget/epautoconf.c | 23 -----------------------
drivers/usb/musb/musb_gadget.c | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 34 insertions(+), 23 deletions(-)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index da45371..254ece7 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -83,29 +83,6 @@ struct usb_ep *usb_ep_autoconfig_ss(
goto found_ep;
}
- /* First, apply chip-specific "best usage" knowledge.
- * This might make a good usb_gadget_ops hook ...
- */
-#ifdef CONFIG_BLACKFIN
- if (gadget_is_musbhdrc(gadget)) {
- if ((USB_ENDPOINT_XFER_BULK == type) ||
- (USB_ENDPOINT_XFER_ISOC == type)) {
- if (USB_DIR_IN & desc->bEndpointAddress)
- ep = gadget_find_ep_by_name(gadget, "ep5in");
- else
- ep = gadget_find_ep_by_name(gadget, "ep6out");
- } else if (USB_ENDPOINT_XFER_INT == type) {
- if (USB_DIR_IN & desc->bEndpointAddress)
- ep = gadget_find_ep_by_name(gadget, "ep1in");
- else
- ep = gadget_find_ep_by_name(gadget, "ep2out");
- } else
- ep = NULL;
- if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
- goto found_ep;
- }
-#endif
-
/* Second, look at endpoints until an unclaimed one looks usable */
list_for_each_entry (ep, &gadget->ep_list, ep_list) {
if (usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 4150baf..02c3f8a 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1684,6 +1684,39 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
return 0;
}
+#ifdef CONFIG_BLACKFIN
+static struct usb_ep *musb_match_ep(struct usb_gadget *g,
+ struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+ struct usb_ep *ep = NULL;
+ u8 type = usb_endpoint_type(desc);
+
+ switch(type) {
+ case USB_ENDPOINT_XFER_ISOC:
+ case USB_ENDPOINT_XFER_BULK:
+ if (usb_endpoint_dir_in(desc))
+ ep = gadget_find_ep_by_name(g, "ep5in");
+ else
+ ep = gadget_find_ep_by_name(g, "ep6out");
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (usb_endpoint_dir_in(desc))
+ ep = gadget_find_ep_by_name(g, "ep1in");
+ else
+ ep = gadget_find_ep_by_name(g, "ep2out");
+ default:
+ }
+
+ if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
+ return ep;
+
+ return NULL;
+}
+#else
+#define musb_match_ep NULL
+#endif
+
static int musb_gadget_start(struct usb_gadget *g,
struct usb_gadget_driver *driver);
static int musb_gadget_stop(struct usb_gadget *g);
@@ -1697,6 +1730,7 @@ static const struct usb_gadget_ops musb_gadget_operations = {
.pullup = musb_gadget_pullup,
.udc_start = musb_gadget_start,
.udc_stop = musb_gadget_stop,
+ .match_ep = musb_match_ep,
};
/* ----------------------------------------------------------------------- */
--
1.9.1
More information about the linux-arm-kernel
mailing list