[PATCH V2 01/11] dts: imx51: fix sd card gpio polarity specified in device tree

[Dong Aisheng]

cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().

Signed-off-by: Dong Aisheng <aisheng.dong at freescale.com>
---
 arch/arm/boot/dts/imx51-apf51dev.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 93d3ea1..0f3fe29 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -98,7 +98,7 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	status = "okay";
 };
-- 
1.9.1