[PATCH 3/3] arm: dts: ls1021a: Add snps, configure-gfladj property to USB3 node

[Alexander Stein]

On Thursday 23 July 2015 15:42:58, Nikhil Badola wrote:
> Add "snps,configure-gfladj" boolean property to USB3 node. This property
                      ^^^^^^
This does not match...

> is used to determine if frame length adjustment is required
> 
> Signed-off-by: Nikhil Badola <nikhil.badola at freescale.com>
> ---
>  arch/arm/boot/dts/ls1021a.dtsi | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index c70bb27..f03f842 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -404,6 +404,7 @@
>  			reg = <0x0 0x3100000 0x0 0x10000>;
>  			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
>  			dr_mode = "host";
> +			snps,configure-fladj = <0x20>;
                             ^^^^^
...that. The same is for the subject. I guess these "gfladj" are just leftovers as patch 1 & 2 talk about "fladj"

Best regards,
Alexander
-- 
Dipl.-Inf. Alexander Stein
SYS TEC electronic GmbH
alexander.stein at systec-electronic.com

Legal and Commercial Address:
Am Windrad 2
08468 Heinsdorfergrund
Germany

Office: +49 (0) 3765 38600-0
Fax:    +49 (0) 3765 38600-4100
 
Managing Directors:
	Director Technology/CEO: Dipl.-Phys. Siegmar Schmidt;
	Director Commercial Affairs/COO: Dipl. Ing. (FH) Armin von Collrepp
Commercial Registry:
	Amtsgericht Chemnitz, HRB 28082; USt.-Id Nr. DE150534010