[PATCH RFC 1/5] clk: mvebu: Add Armada 38x support for clk-cpu

[Andrew Lunn]

On Fri, Jul 03, 2015 at 08:11:53AM +0200, Gregory CLEMENT wrote:
> This patch first shortens the registers definition and also introduces
> difference between Armada XP value and Armada 38x value.
> 
> Then it adds specific functions for Armada 38x in order to support cpu
> freq on these SoCs.

Hi Gregory

I would suggest splitting this into two. Because of the #define
changes, it is not easy to see the new functions from #define changes.

> 
> Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
> ---
>  .../devicetree/bindings/clock/mvebu-cpu-clock.txt  |  27 ++-
>  drivers/clk/mvebu/clk-cpu.c                        | 220 ++++++++++++++++-----
>  2 files changed, 201 insertions(+), 46 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
> index 99c214660bdc..9272b3464ab1 100644
> --- a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
> @@ -1,10 +1,13 @@
>  Device Tree Clock bindings for cpu clock of Marvell EBU platforms

Maybe i'm reading the following hunk wrong, but....
  
>  Required properties:
> -- compatible : shall be one of the following:
> +- compatible : shall be the following:

"one of the following" is grammatically better.

>  	"marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
> +	"marvell,armada-38x-cpu-clock", "marvell,armada-xp-cpu-clock" - cpu
> +	clocks for Armada 38x

and don't we now have marvell,armada-xp-cpu-clock twice?

>  - reg : Address and length of the clock complex register set, followed
> -        by address and length of the PMU DFS registers
> +	by address and length of the PMU DFS registers, for Armada 38x
> +	a third register set must be addeed: DFX server.
>  - #clock-cells : should be set to 1.
>  - clocks : shall be the input parent clock phandle for the clock.
>  
> @@ -20,3 +23,23 @@ cpu at 0 {
>  	reg = <0>;
>  	clocks = <&cpuclk 0>;
>  };
> +
> +or for Armada38x
> +
> +cpuclk: clock-complex at 18700 {
> +	compatible = "marvell,armada-380-cpu-clock",
> +	"marvell,armada-xp-cpu-clock";
> +	reg = <0x18700 0xA0>, <0x1c054 0x40>,
> +	<0xe4260 0x8>;

Maybe this third address property could be better indented?

      Andrew