[PATCH v6] PCI: Store PCIe bus address in struct of_pci_range

[Gabriele Paoloni]

> -----Original Message-----
> From: linux-pci-owner at vger.kernel.org [mailto:linux-pci-
> owner at vger.kernel.org] On Behalf Of Gabriele Paoloni
> Sent: Thursday, July 30, 2015 2:52 PM
> To: Rob Herring
> Cc: Bjorn Helgaas; arnd at arndb.de; lorenzo.pieralisi at arm.com; Wangzhou
> (B); robh+dt at kernel.org; james.morse at arm.com; Liviu.Dudau at arm.com;
> linux-pci at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> devicetree at vger.kernel.org; Yuanzhichang; Zhudacai; zhangjukuo;
> qiuzhenfa; Liguozhu (Kenneth)
> Subject: RE: [PATCH v6] PCI: Store PCIe bus address in struct
> of_pci_range
> 
> 
> 
> > -----Original Message-----
> > From: linux-pci-owner at vger.kernel.org [mailto:linux-pci-
> > owner at vger.kernel.org] On Behalf Of Rob Herring
> > Sent: Thursday, July 30, 2015 2:43 PM
> > To: Gabriele Paoloni
> > Cc: Bjorn Helgaas; arnd at arndb.de; lorenzo.pieralisi at arm.com; Wangzhou
> > (B); robh+dt at kernel.org; james.morse at arm.com; Liviu.Dudau at arm.com;
> > linux-pci at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> > devicetree at vger.kernel.org; Yuanzhichang; Zhudacai; zhangjukuo;
> > qiuzhenfa; Liguozhu (Kenneth)
> > Subject: Re: [PATCH v6] PCI: Store PCIe bus address in struct
> > of_pci_range
> >
> > On Wed, Jul 29, 2015 at 2:44 PM, Gabriele Paoloni
> > <gabriele.paoloni at huawei.com> wrote:
> > > Hi Bjorn
> > >
> > > Many Thanks for your reply
> > >
> > > I have commented back inline with resolutions from my side.
> > >
> > > If you're ok with them I'll send it out a new version in the
> > appropriate patchset
> > >
> > > Cheers
> > >
> > > Gab
> > >
> > >> -----Original Message-----
> > >> From: Bjorn Helgaas [mailto:bhelgaas at google.com]
> > >> Sent: Wednesday, July 29, 2015 6:21 PM
> > >> To: Gabriele Paoloni
> > >> Cc: arnd at arndb.de; lorenzo.pieralisi at arm.com; Wangzhou (B);
> > >> robh+dt at kernel.org; james.morse at arm.com; Liviu.Dudau at arm.com;
> linux-
> > >> pci at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> > >> devicetree at vger.kernel.org; Yuanzhichang; Zhudacai; zhangjukuo;
> > >> qiuzhenfa; Liguozhu (Kenneth)
> > >> Subject: Re: [PATCH v6] PCI: Store PCIe bus address in struct
> > >> of_pci_range
> > >>
> > >> Hi Gabriele,
> > >>
> > >> As far as I can tell, this is not specific to PCIe, so please use
> > "PCI"
> > >> in
> > >> the subject as a generic term that includes both PCI and PCIe.
> > >
> > > sure agreed
> > >
> > >>
> > >> On Mon, Jul 27, 2015 at 11:17:03PM +0800, Gabriele Paoloni wrote:
> > >> > From: gabriele paoloni <gabriele.paoloni at huawei.com>
> > >> >
> > >> >     This patch is needed port PCIe designware to new DT parsing
> > API
> > >> >     As discussed in
> > >> >     http://lists.infradead.org/pipermail/linux-arm-kernel/2015-
> > >> January/317743.html
> > >> >     in designware we have a problem as the PCI addresses in the
> > PCIe
> > >> controller
> > >> >     address space are required in order to perform correct HW
> > >> operation.
> > >> >
> > >> >     In order to solve this problem commit f4c55c5a3 "PCI:
> > designware:
> > >> >     Program ATU with untranslated address" added code to read
> the
> > >> PCIe
> > >>
> > >> Conventional reference is 12-char SHA1, like this:
> > >>
> > >>   f4c55c5a3f7f ("PCI: designware: Program ATU with untranslated
> > >> address")
> > >
> > > Agreed, will change this
> > >
> > >>
> > >> >     controller start address directly from the DT ranges.
> > >> >
> > >> >     In the new DT parsing API of_pci_get_host_bridge_resources()
> > >> hides the
> > >> >     DT parser from the host controller drivers, so it is not
> > possible
> > >> >     for drivers to parse values directly from the DT.
> > >> >
> > >> >     In http://www.spinics.net/lists/linux-pci/msg42540.html we
> > >> already tried
> > >> >     to use the new DT parsing API but there is a bug (obviously)
> > in
> > >> setting
> > >> >     the <*>_mod_base addresses
> > >> >     Applying this patch we can easily set "<*>_mod_base = win-
> > >> >__res.start"
> > >>
> > >> By itself, this patch adds something.  It would help me understand
> > it
> > >> if
> > >> the *user* of this new something were in the same patch series.
> > >
> > > the user is: "[PATCH v5 2/5] PCI: designware: Add ARM64 support"
> > > I will ask Zhou Wang to include this patch in his patchset
> > >
> > >
> > >>
> > >> >     This patch adds a new field in "struct of_pci_range" to
> store
> > the
> > >> >     pci bus start address; it fills the field in
> > >> of_pci_range_parser_one();
> > >> >     in of_pci_get_host_bridge_resources() it retrieves the
> > resource
> > >> entry
> > >> >     after it is created and added to the resource list and uses
> > >> >     entry->__res.start to store the pci controller address
> > >>
> > >> struct of_pci_range is starting to get confusing to non-OF folks
> > like
> > >> me.
> > >> It now contains:
> > >>
> > >>   u32 pci_space;
> > >>   u64 pci_addr;
> > >>   u64 cpu_addr;
> > >>   u64 bus_addr;
> > >>
> > >> Can you explain what all these things mean, and maybe even add
> one-
> > line
> > >> comments to the structure?
> > >
> > > sure I can add comments inline in the code
> > >
> > >>
> > >> pci_space: The only uses I see are to determine whether to print
> > >> "Prefetch".  I don't see any real functionality that uses this.
> > >
> > > Looking at the code I agree. it's seems to be used only in powerpc
> > > and microblaze to print out.
> > > However from my understanding pci_space is the phys.hi field of the
> > > ranges property: it defines the properties of the address space
> > associated
> > > to the PCI address. if you're curious you can find a nice and quick
> > to read
> > > "guide" in http://devicetree.org/MPC5200:PCI
> > >
> > >>
> > >> pci_addr: I assume this is a PCI bus address, like what you would
> > see
> > >> if
> > >> you put an analyzer on the bus/link.  This address could go in a
> BAR.
> > >
> > > Yes, this is the PCI start address of the range: phys.mid +
> phys.low
> > in the
> > > guide mentioned above
> > >
> > >>
> > >> cpu_addr: I assume this is a CPU physical address, like what you
> > would
> > >> see
> > >> in /proc/iomem and what you would pass to ioremap().
> > >
> > > Yes correct
> > >
> > >>
> > >> bus_addr: ?
> > >>
> > >
> > > According to the guide above, this is the address into which the
> > pci_address
> > > get translated to and that is passed to the root complex. Between
> the
> > root
> > > complex and the CPU there can be intermediate translation layers:
> see
> > that to
> > > get pci_address we call "of_translate_address"; this will apply all
> > the
> > > translation layers (ranges in the DT) that it finds till it comes
> to
> > the root
> > > node of the DT (thus retrieving the CPU address).
> > > Now said that, for designware we need the first translated PCI
> > address, that we call
> >
> > I think you mean "translated CPU address." The flow of addresses
> looks
> > like this:
> >
> > CPU -> CPU bus address -> bus fabric address decoding -> bus address
> > -> DW PCI -> PCI address
> >
> > This is quite common that an IP block does not see the full address.
> > It is unusual that the IP block needs to know its full address on the
> > slave side. It is quite common for the master side and the kernel
> > deals with that all the time with DMA mapping
> >
> > > here bus_addr after Rob Herring suggested the name...honestly I
> > cannot think of a
> > > different name
> >
> > Thinking about this some more, is this really a translation versus
> > just a stripping of high bits? Does the DW IP have less than 32-bits
> > address? If so, we could express differently and just mask the CPU
> > address within the driver instead.
> 
> I don’t think we should rely on PCI addresses...what if the
> intermediate
> translation layer changes the lower significant bits of the "bus
> address"
> to translate into a cpu address?

Sorry above I meant "I don’t think we should rely on CPU addresses"

> 
> In that case we're going to program the DW with a wrong address
> 
> What I am saying is that the DW driver should not rely on the
> behavior of external HW....what do you think?
> 
> >
> > Rob
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-pci"
> in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> ��칻
�&�~�&���+-
> ��ݶ��w��˛���m�b��ir(����ܨ}���Ơz�&j:+v���
����zZ+��+zf���h���~����i���
> z�
�w���?����&�)ߢf