[PATCH 04/16] ARM: shmobile: Remove legacy board code for KZM-A9-GT

Simon Horman horms+renesas at verge.net.au
Thu Jul 9 23:36:51 PDT 2015


From: Geert Uytterhoeven <geert+renesas at glider.be>

The KZM-A9-GT board is sufficiently supported by DT-based and board-less
SH-Mobile AG5 (sh73a0) multiplatform kernels. Hence remove the legacy
board code to reduce maintenance effort.

Lacking areas are:
  - USB (it does't work in legacy, neither),
  - LCDC (the LCDC is wired to the legacy INTC, which is not planned to
    be supported with DT).
  - DMAC/IPMMU (no DT bindings are planned).

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig                     |   8 -
 arch/arm/mach-shmobile/Makefile                    |   1 -
 arch/arm/mach-shmobile/Makefile.boot               |   1 -
 arch/arm/mach-shmobile/board-kzm9g.c               | 916 ---------------------
 arch/arm/mach-shmobile/include/mach/head-kzm9g.txt | 410 ---------
 arch/arm/mach-shmobile/include/mach/zboot.h        |   5 -
 arch/arm/mach-shmobile/intc-sh73a0.c               | 337 --------
 7 files changed, 1678 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-kzm9g.c
 delete mode 100644 arch/arm/mach-shmobile/include/mach/head-kzm9g.txt
 delete mode 100644 arch/arm/mach-shmobile/intc-sh73a0.c

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 45006479d461..3cebc4cbb8ca 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -171,14 +171,6 @@ config MACH_MARZEN
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select USE_OF
 
-config MACH_KZM9G
-	bool "KZM-A9-GT board"
-	depends on ARCH_SH73A0
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD
-	select USE_OF
-
 comment "Renesas ARM SoCs System Configuration"
 
 config CPU_HAS_INTEVT
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 89e463de4479..a4d7f5734e91 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -58,7 +58,6 @@ obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
 obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
-obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o intc-sh73a0.o
 endif
 
 # Framework support
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index e1ef19cef89c..2269b1c3c30b 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -3,7 +3,6 @@ loadaddr-y	:=
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
-loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
 
 __ZRELADDR	:= $(sort $(loadaddr-y))
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
deleted file mode 100644
index 260d8319fd82..000000000000
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ /dev/null
@@ -1,916 +0,0 @@
-/*
- * KZM-A9-GT board support
- *
- * Copyright (C) 2012	Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/input.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mfd/as3711.h>
-#include <linux/mfd/tmio.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <linux/videodev2.h>
-
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <video/sh_mobile_lcdc.h>
-
-#include "common.h"
-#include "intc.h"
-#include "irqs.h"
-#include "sh73a0.h"
-
-/*
- * external GPIO
- */
-#define GPIO_PCF8575_BASE	(310)
-#define GPIO_PCF8575_PORT10	(GPIO_PCF8575_BASE + 8)
-#define GPIO_PCF8575_PORT11	(GPIO_PCF8575_BASE + 9)
-#define GPIO_PCF8575_PORT12	(GPIO_PCF8575_BASE + 10)
-#define GPIO_PCF8575_PORT13	(GPIO_PCF8575_BASE + 11)
-#define GPIO_PCF8575_PORT14	(GPIO_PCF8575_BASE + 12)
-#define GPIO_PCF8575_PORT15	(GPIO_PCF8575_BASE + 13)
-#define GPIO_PCF8575_PORT16	(GPIO_PCF8575_BASE + 14)
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-/*
- * FSI-AK4648
- *
- * this command is required when playback.
- *
- * # amixer set "LINEOUT Mixer DACL" on
- */
-
-/* SMSC 9221 */
-static struct resource smsc9221_resources[] = {
-	[0] = {
-		.start	= 0x10000000, /* CS4 */
-		.end	= 0x100000ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= irq_pin(3), /* IRQ3 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc9221_platdata = {
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device smsc_device = {
-	.name		= "smsc911x",
-	.dev  = {
-		.platform_data = &smsc9221_platdata,
-	},
-	.resource	= smsc9221_resources,
-	.num_resources	= ARRAY_SIZE(smsc9221_resources),
-};
-
-/* USB external chip */
-static struct r8a66597_platdata usb_host_data = {
-	.on_chip	= 0,
-	.xtal		= R8A66597_PLATDATA_XTAL_48MHZ,
-};
-
-static struct resource usb_resources[] = {
-	[0] = {
-		.start	= 0x10010000,
-		.end	= 0x1001ffff - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= irq_pin(1), /* IRQ1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb_host_device = {
-	.name	= "r8a66597_hcd",
-	.dev = {
-		.platform_data		= &usb_host_data,
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(usb_resources),
-	.resource	= usb_resources,
-};
-
-/* USB Func CN17 */
-struct usbhs_private {
-	void __iomem *phy;
-	void __iomem *cr2;
-	struct renesas_usbhs_platform_info info;
-};
-
-#define IRQ15			irq_pin(15)
-#define USB_PHY_MODE		(1 << 4)
-#define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
-#define USB_PHY_ON		(1 << 1)
-#define USB_PHY_OFF		(1 << 0)
-#define USB_PHY_INT_CLR		(USB_PHY_ON | USB_PHY_OFF)
-
-#define usbhs_get_priv(pdev) \
-	container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
-
-static int usbhs_get_vbus(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	return !((1 << 7) & __raw_readw(priv->cr2));
-}
-
-static int usbhs_phy_reset(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	/* init phy */
-	__raw_writew(0x8a0a, priv->cr2);
-
-	return 0;
-}
-
-static int usbhs_get_id(struct platform_device *pdev)
-{
-	return USBHS_GADGET;
-}
-
-static irqreturn_t usbhs_interrupt(int irq, void *data)
-{
-	struct platform_device *pdev = data;
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	renesas_usbhs_call_notify_hotplug(pdev);
-
-	/* clear status */
-	__raw_writew(__raw_readw(priv->phy) | USB_PHY_INT_CLR, priv->phy);
-
-	return IRQ_HANDLED;
-}
-
-static int usbhs_hardware_init(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-	int ret;
-
-	/* clear interrupt status */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
-
-	ret = request_irq(IRQ15, usbhs_interrupt, IRQF_TRIGGER_HIGH,
-			  dev_name(&pdev->dev), pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "request_irq err\n");
-		return ret;
-	}
-
-	/* enable USB phy interrupt */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->phy);
-
-	return 0;
-}
-
-static int usbhs_hardware_exit(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	/* clear interrupt status */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
-
-	free_irq(IRQ15, pdev);
-
-	return 0;
-}
-
-static u32 usbhs_pipe_cfg[] = {
-	USB_ENDPOINT_XFER_CONTROL,
-	USB_ENDPOINT_XFER_ISOC,
-	USB_ENDPOINT_XFER_ISOC,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-};
-
-static struct usbhs_private usbhs_private = {
-	.phy	= IOMEM(0xe60781e0),		/* USBPHYINT */
-	.cr2	= IOMEM(0xe605810c),		/* USBCR2 */
-	.info = {
-		.platform_callback = {
-			.hardware_init	= usbhs_hardware_init,
-			.hardware_exit	= usbhs_hardware_exit,
-			.get_id		= usbhs_get_id,
-			.phy_reset	= usbhs_phy_reset,
-			.get_vbus	= usbhs_get_vbus,
-		},
-		.driver_param = {
-			.buswait_bwait	= 4,
-			.has_otg	= 1,
-			.pipe_type	= usbhs_pipe_cfg,
-			.pipe_size	= ARRAY_SIZE(usbhs_pipe_cfg),
-		},
-	},
-};
-
-static struct resource usbhs_resources[] = {
-	[0] = {
-		.start	= 0xE6890000,
-		.end	= 0xE68900e6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(62),
-		.end	= gic_spi(62),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usbhs_device = {
-	.name	= "renesas_usbhs",
-	.id	= -1,
-	.dev = {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &usbhs_private.info,
-	},
-	.num_resources	= ARRAY_SIZE(usbhs_resources),
-	.resource	= usbhs_resources,
-};
-
-/* LCDC */
-static struct fb_videomode kzm_lcdc_mode = {
-	.name		= "WVGA Panel",
-	.xres		= 800,
-	.yres		= 480,
-	.left_margin	= 220,
-	.right_margin	= 110,
-	.hsync_len	= 70,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.sync		= 0,
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
-	.clock_source = LCDC_CLK_BUS,
-	.ch[0] = {
-		.chan		= LCDC_CHAN_MAINLCD,
-		.fourcc		= V4L2_PIX_FMT_RGB565,
-		.interface_type	= RGB24,
-		.lcd_modes	= &kzm_lcdc_mode,
-		.num_modes	= 1,
-		.clock_divider	= 5,
-		.flags		= 0,
-		.panel_cfg = {
-			.width	= 152,
-			.height	= 91,
-		},
-	}
-};
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.name	= "LCDC",
-		.start	= 0xfe940000,
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-	.resource	= lcdc_resources,
-	.dev	= {
-		.platform_data	= &lcdc_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-/* Fixed 1.8V regulator to be used by MMCIF */
-static struct regulator_consumer_supply fixed1v8_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-/* MMCIF */
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xe6bd0000,
-		.end	= 0xe6bd00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(140),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= gic_spi(141),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_platdata = {
-	.ocr		= MMC_VDD_165_195,
-	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.ccs_unsupported = true,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device mmc_device = {
-	.name		= "sh_mmcif",
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &sh_mmcif_platdata,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* Fixed 3.3V regulators to be used by SDHI0 */
-static struct regulator_consumer_supply vcc_sdhi0_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_init_data vcc_sdhi0_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi0_consumers),
-	.consumer_supplies      = vcc_sdhi0_consumers,
-};
-
-static struct fixed_voltage_config vcc_sdhi0_info = {
-	.supply_name = "SDHI0 Vcc",
-	.microvolts = 3300000,
-	.gpio = 15,
-	.enable_high = 1,
-	.init_data = &vcc_sdhi0_init_data,
-};
-
-static struct platform_device vcc_sdhi0 = {
-	.name = "reg-fixed-voltage",
-	.id   = 0,
-	.dev  = {
-		.platform_data = &vcc_sdhi0_info,
-	},
-};
-
-/* Fixed 3.3V regulators to be used by SDHI2 */
-static struct regulator_consumer_supply vcc_sdhi2_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
-};
-
-static struct regulator_init_data vcc_sdhi2_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi2_consumers),
-	.consumer_supplies      = vcc_sdhi2_consumers,
-};
-
-static struct fixed_voltage_config vcc_sdhi2_info = {
-	.supply_name = "SDHI2 Vcc",
-	.microvolts = 3300000,
-	.gpio = 14,
-	.enable_high = 1,
-	.init_data = &vcc_sdhi2_init_data,
-};
-
-static struct platform_device vcc_sdhi2 = {
-	.name = "reg-fixed-voltage",
-	.id   = 1,
-	.dev  = {
-		.platform_data = &vcc_sdhi2_info,
-	},
-};
-
-/* SDHI */
-static struct tmio_mmc_data sdhi0_info = {
-	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
-	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_POWER_OFF_CARD,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start	= 0xee100000,
-		.end	= 0xee1000ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(83),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(84),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(85),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name		= "sh_mobile_sdhi",
-	.num_resources	= ARRAY_SIZE(sdhi0_resources),
-	.resource	= sdhi0_resources,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-/* Micro SD */
-static struct tmio_mmc_data sdhi2_info = {
-	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI2_TX,
-	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI2_RX,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT |
-			  TMIO_MMC_USE_GPIO_CD |
-			  TMIO_MMC_WRPROTECT_DISABLE,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_POWER_OFF_CARD,
-	.cd_gpio	= 13,
-};
-
-static struct resource sdhi2_resources[] = {
-	[0] = {
-		.name	= "SDHI2",
-		.start	= 0xee140000,
-		.end	= 0xee1400ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(103),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(104),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(105),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi2_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(sdhi2_resources),
-	.resource	= sdhi2_resources,
-	.dev	= {
-		.platform_data	= &sdhi2_info,
-	},
-};
-
-/* KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
-
-static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_BACK,	GPIO_PCF8575_PORT10,	"SW3"),
-	GPIO_KEY(KEY_RIGHT,	GPIO_PCF8575_PORT11,	"SW2-R"),
-	GPIO_KEY(KEY_LEFT,	GPIO_PCF8575_PORT12,	"SW2-L"),
-	GPIO_KEY(KEY_ENTER,	GPIO_PCF8575_PORT13,	"SW2-P"),
-	GPIO_KEY(KEY_UP,	GPIO_PCF8575_PORT14,	"SW2-U"),
-	GPIO_KEY(KEY_DOWN,	GPIO_PCF8575_PORT15,	"SW2-D"),
-	GPIO_KEY(KEY_HOME,	GPIO_PCF8575_PORT16,	"SW1"),
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name	= "gpio-keys",
-	.dev	= {
-		.platform_data  = &gpio_key_info,
-	},
-};
-
-/* FSI-AK4648 */
-static struct sh_fsi_platform_info fsi_info = {
-	.port_a = {
-		.tx_id = SHDMA_SLAVE_FSI2A_TX,
-	},
-};
-
-static struct resource fsi_resources[] = {
-	[0] = {
-		.name	= "FSI",
-		.start	= 0xEC230000,
-		.end	= 0xEC230400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(146),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-	.dev	= {
-		.platform_data	= &fsi_info,
-	},
-};
-
-static struct asoc_simple_card_info fsi2_ak4648_info = {
-	.name		= "AK4648",
-	.card		= "FSI2A-AK4648",
-	.codec		= "ak4642-codec.0-0012",
-	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
-	.cpu_dai = {
-		.name	= "fsia-dai",
-	},
-	.codec_dai = {
-		.name	= "ak4642-hifi",
-		.sysclk	= 11289600,
-	},
-};
-
-static struct platform_device fsi_ak4648_device = {
-	.name	= "asoc-simple-card",
-	.dev	= {
-		.platform_data	= &fsi2_ak4648_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &fsi_ak4648_device.dev.coherent_dma_mask,
-	},
-};
-
-/* I2C */
-
-/* StepDown1 is used to supply 1.315V to the CPU */
-static struct regulator_init_data as3711_sd1 = {
-	.constraints = {
-		.name = "1.315V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1315000,
-		.max_uV = 1335000,
-	},
-};
-
-/* StepDown2 is used to supply 1.8V to the CPU and to the board */
-static struct regulator_init_data as3711_sd2 = {
-	.constraints = {
-		.name = "1.8V",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-	},
-};
-
-/*
- * StepDown3 is switched in parallel with StepDown2, seems to be off,
- * according to read-back pre-set register values
- */
-
-/* StepDown4 is used to supply 1.215V to the CPU and to the board */
-static struct regulator_init_data as3711_sd4 = {
-	.constraints = {
-		.name = "1.215V",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1215000,
-		.max_uV = 1235000,
-	},
-};
-
-/* LDO1 is unused and unconnected */
-
-/* LDO2 is used to supply 2.8V to the CPU */
-static struct regulator_init_data as3711_ldo2 = {
-	.constraints = {
-		.name = "2.8V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-	},
-};
-
-/* LDO3 is used to supply 3.0V to the CPU */
-static struct regulator_init_data as3711_ldo3 = {
-	.constraints = {
-		.name = "3.0V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-	},
-};
-
-/* LDO4 is used to supply 2.8V to the board */
-static struct regulator_init_data as3711_ldo4 = {
-	.constraints = {
-		.name = "2.8V",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-	},
-};
-
-/* LDO5 is switched parallel to LDO4, also set to 2.8V */
-static struct regulator_init_data as3711_ldo5 = {
-	.constraints = {
-		.name = "2.8V #2",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-	},
-};
-
-/* LDO6 is unused and unconnected */
-
-/* LDO7 is used to supply 1.15V to the CPU */
-static struct regulator_init_data as3711_ldo7 = {
-	.constraints = {
-		.name = "1.15V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1150000,
-		.max_uV = 1150000,
-	},
-};
-
-/* LDO8 is switched parallel to LDO7, also set to 1.15V */
-static struct regulator_init_data as3711_ldo8 = {
-	.constraints = {
-		.name = "1.15V CPU #2",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1150000,
-		.max_uV = 1150000,
-	},
-};
-
-static struct as3711_platform_data as3711_pdata = {
-	.regulator	= {
-		.init_data	= {
-			[AS3711_REGULATOR_SD_1] = &as3711_sd1,
-			[AS3711_REGULATOR_SD_2] = &as3711_sd2,
-			[AS3711_REGULATOR_SD_4] = &as3711_sd4,
-			[AS3711_REGULATOR_LDO_2] = &as3711_ldo2,
-			[AS3711_REGULATOR_LDO_3] = &as3711_ldo3,
-			[AS3711_REGULATOR_LDO_4] = &as3711_ldo4,
-			[AS3711_REGULATOR_LDO_5] = &as3711_ldo5,
-			[AS3711_REGULATOR_LDO_7] = &as3711_ldo7,
-			[AS3711_REGULATOR_LDO_8] = &as3711_ldo8,
-		},
-	},
-	.backlight	= {
-		.su2_fb = "sh_mobile_lcdc_fb.0",
-		.su2_max_uA = 36000,
-		.su2_feedback = AS3711_SU2_CURR_AUTO,
-		.su2_fbprot = AS3711_SU2_GPIO4,
-		.su2_auto_curr1 = true,
-		.su2_auto_curr2 = true,
-		.su2_auto_curr3 = true,
-	},
-};
-
-static struct pcf857x_platform_data pcf8575_pdata = {
-	.gpio_base	= GPIO_PCF8575_BASE,
-};
-
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("ak4648", 0x12),
-	},
-	{
-		I2C_BOARD_INFO("r2025sd", 0x32),
-	},
-	{
-		I2C_BOARD_INFO("ak8975", 0x0c),
-		.irq = irq_pin(28), /* IRQ28 */
-	},
-	{
-		I2C_BOARD_INFO("adxl34x", 0x1d),
-		.irq = irq_pin(26), /* IRQ26 */
-	},
-	{
-		I2C_BOARD_INFO("as3711", 0x40),
-		.irq = intcs_evt2irq(0x3300), /* IRQ24 */
-		.platform_data = &as3711_pdata,
-	},
-};
-
-static struct i2c_board_info i2c1_devices[] = {
-	{
-		I2C_BOARD_INFO("st1232-ts", 0x55),
-		.irq = irq_pin(8), /* IRQ8 */
-	},
-};
-
-static struct i2c_board_info i2c3_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8575", 0x20),
-		.irq = irq_pin(19), /* IRQ19 */
-		.platform_data = &pcf8575_pdata,
-	},
-};
-
-static struct platform_device *kzm_devices[] __initdata = {
-	&smsc_device,
-	&usb_host_device,
-	&usbhs_device,
-	&lcdc_device,
-	&mmc_device,
-	&vcc_sdhi0,
-	&vcc_sdhi2,
-	&sdhi0_device,
-	&sdhi2_device,
-	&gpio_keys_device,
-	&fsi_device,
-	&fsi_ak4648_device,
-};
-
-static unsigned long pin_pullup_conf[] = {
-	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map kzm_pinctrl_map[] = {
-	/* FSIA (AK4648) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_mclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_sclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_data_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_data_out", "fsia"),
-	/* I2C3 */
-	PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0",
-				  "i2c3_1", "i2c3"),
-	/* LCD */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh73a0",
-				  "lcd_data24", "lcd"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh73a0",
-				  "lcd_sync", "lcd"),
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_data8_0", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_ctrl_0", "mmc0"),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				    "PORT279", pin_pullup_conf),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				      "mmc0_data8_0", pin_pullup_conf),
-	/* SCIFA4 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_data", "scifa4"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_ctrl", "scifa4"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_wp", "sdhi0"),
-	/* SDHI2 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0",
-				  "sdhi2_data4", "sdhi2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0",
-				  "sdhi2_ctrl", "sdhi2"),
-	/* SMSC */
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
-				  "bsc_cs4", "bsc"),
-	/* USB */
-	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-sh73a0",
-				  "usb_vbus", "usb"),
-};
-
-static void __init kzm_init(void)
-{
-	regulator_register_always_on(2, "fixed-1.8V", fixed1v8_power_consumers,
-				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
-	regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
-
-	sh73a0_pinmux_init();
-
-	/* SMSC */
-	gpio_request_one(224, GPIOF_IN, NULL); /* IRQ3 */
-
-	/* LCDC */
-	gpio_request_one(222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */
-	gpio_request_one(226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */
-
-	/* Touchscreen */
-	gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
-#endif
-
-	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
-	i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices));
-	i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices));
-
-	sh73a0_add_standard_devices();
-	platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
-
-	sh73a0_pm_init();
-}
-
-static void kzm9g_restart(enum reboot_mode mode, const char *cmd)
-{
-#define RESCNT2 IOMEM(0xe6188020)
-	/* Do soft power on reset */
-	writel((1 << 31), RESCNT2);
-}
-
-static const char *kzm9g_boards_compat_dt[] __initdata = {
-	"renesas,kzm9g",
-	NULL,
-};
-
-DT_MACHINE_START(KZM9G_DT, "kzm9g")
-	.smp		= smp_ops(sh73a0_smp_ops),
-	.map_io		= sh73a0_map_io,
-	.init_early	= sh73a0_add_early_devices,
-	.init_irq	= sh73a0_init_irq,
-	.init_machine	= kzm_init,
-	.init_late	= shmobile_init_late,
-	.init_time	= sh73a0_earlytimer_init,
-	.restart	= kzm9g_restart,
-	.dt_compat	= kzm9g_boards_compat_dt,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/include/mach/head-kzm9g.txt b/arch/arm/mach-shmobile/include/mach/head-kzm9g.txt
deleted file mode 100644
index 9531f46a822a..000000000000
--- a/arch/arm/mach-shmobile/include/mach/head-kzm9g.txt
+++ /dev/null
@@ -1,410 +0,0 @@
-LIST "KZM9G low-level initialization routine."
-LIST "Adapted from u-boot KZM9G support code."
-
-LIST "Copyright (C) 2013 Ulrich Hecht"
-
-LIST "This program is free software; you can redistribute it and/or modify"
-LIST "it under the terms of the GNU General Public License version 2 as"
-LIST "published by the Free Software Foundation."
-
-LIST "This program is distributed in the hope that it will be useful,"
-LIST "but WITHOUT ANY WARRANTY; without even the implied warranty of"
-LIST "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the"
-LIST "GNU General Public License for more details."
-
-
-LIST "Register definitions:"
-
-LIST "Secure control register"
-#define LIFEC_SEC_SRC (0xE6110008)
-
-LIST "RWDT"
-#define RWDT_BASE   (0xE6020000)
-#define RWTCSRA0 (RWDT_BASE + 0x04)
-
-LIST "HPB Semaphore Control Registers"
-#define HPBSCR_BASE (0xE6000000)
-#define HPBCTRL6 (HPBSCR_BASE + 0x1030)
-
-#define SBSC1_BASE  (0xFE400000)
-#define SDCR0A		(SBSC1_BASE + 0x0008)
-#define SDCR1A		(SBSC1_BASE + 0x000C)
-#define SDPCRA		(SBSC1_BASE + 0x0010)
-#define SDCR0SA		(SBSC1_BASE + 0x0018)
-#define SDCR1SA		(SBSC1_BASE + 0x001C)
-#define RTCSRA		(SBSC1_BASE + 0x0020)
-#define RTCORA		(SBSC1_BASE + 0x0028)
-#define RTCORHA		(SBSC1_BASE + 0x002C)
-#define SDWCRC0A	(SBSC1_BASE + 0x0040)
-#define SDWCRC1A	(SBSC1_BASE + 0x0044)
-#define SDWCR00A	(SBSC1_BASE + 0x0048)
-#define SDWCR01A	(SBSC1_BASE + 0x004C)
-#define SDWCR10A	(SBSC1_BASE + 0x0050)
-#define SDWCR11A	(SBSC1_BASE + 0x0054)
-#define SDWCR2A		(SBSC1_BASE + 0x0060)
-#define SDWCRC2A	(SBSC1_BASE + 0x0064)
-#define ZQCCRA		(SBSC1_BASE + 0x0068)
-#define SDMRACR0A	(SBSC1_BASE + 0x0084)
-#define SDMRTMPCRA	(SBSC1_BASE + 0x008C)
-#define SDMRTMPMSKA	(SBSC1_BASE + 0x0094)
-#define SDGENCNTA	(SBSC1_BASE + 0x009C)
-#define SDDRVCR0A	(SBSC1_BASE + 0x00B4)
-#define DLLCNT0A	(SBSC1_BASE + 0x0354)
-
-#define SDMRA1  (0xFE500000)
-#define SDMRA2  (0xFE5C0000)
-#define SDMRA3  (0xFE504000)
-
-#define SBSC2_BASE  (0xFB400000)
-#define SDCR0B		(SBSC2_BASE + 0x0008)
-#define SDCR1B		(SBSC2_BASE + 0x000C)
-#define SDPCRB		(SBSC2_BASE + 0x0010)
-#define SDCR0SB		(SBSC2_BASE + 0x0018)
-#define SDCR1SB		(SBSC2_BASE + 0x001C)
-#define RTCSRB		(SBSC2_BASE + 0x0020)
-#define RTCORB		(SBSC2_BASE + 0x0028)
-#define RTCORHB		(SBSC2_BASE + 0x002C)
-#define SDWCRC0B	(SBSC2_BASE + 0x0040)
-#define SDWCRC1B	(SBSC2_BASE + 0x0044)
-#define SDWCR00B	(SBSC2_BASE + 0x0048)
-#define SDWCR01B	(SBSC2_BASE + 0x004C)
-#define SDWCR10B	(SBSC2_BASE + 0x0050)
-#define SDWCR11B	(SBSC2_BASE + 0x0054)
-#define SDPDCR0B	(SBSC2_BASE + 0x0058)
-#define SDWCR2B		(SBSC2_BASE + 0x0060)
-#define SDWCRC2B	(SBSC2_BASE + 0x0064)
-#define ZQCCRB		(SBSC2_BASE + 0x0068)
-#define SDMRACR0B	(SBSC2_BASE + 0x0084)
-#define SDMRTMPCRB	(SBSC2_BASE + 0x008C)
-#define SDMRTMPMSKB	(SBSC2_BASE + 0x0094)
-#define SDGENCNTB	(SBSC2_BASE + 0x009C)
-#define DPHYCNT0B	(SBSC2_BASE + 0x00A0)
-#define DPHYCNT1B	(SBSC2_BASE + 0x00A4)
-#define DPHYCNT2B	(SBSC2_BASE + 0x00A8)
-#define SDDRVCR0B	(SBSC2_BASE + 0x00B4)
-#define DLLCNT0B	(SBSC2_BASE + 0x0354)
-
-#define SDMRB1  (0xFB500000)
-#define SDMRB2  (0xFB5C0000)
-#define SDMRB3  (0xFB504000)
-
-#define CPG_BASE   (0xE6150000)
-#define FRQCRA		(CPG_BASE + 0x0000)
-#define FRQCRB		(CPG_BASE + 0x0004)
-#define FRQCRD		(CPG_BASE + 0x00E4)
-#define VCLKCR1		(CPG_BASE + 0x0008)
-#define VCLKCR2		(CPG_BASE + 0x000C)
-#define VCLKCR3		(CPG_BASE + 0x001C)
-#define ZBCKCR		(CPG_BASE + 0x0010)
-#define FLCKCR		(CPG_BASE + 0x0014)
-#define SD0CKCR		(CPG_BASE + 0x0074)
-#define SD1CKCR		(CPG_BASE + 0x0078)
-#define SD2CKCR		(CPG_BASE + 0x007C)
-#define FSIACKCR	(CPG_BASE + 0x0018)
-#define SUBCKCR		(CPG_BASE + 0x0080)
-#define SPUACKCR	(CPG_BASE + 0x0084)
-#define SPUVCKCR	(CPG_BASE + 0x0094)
-#define MSUCKCR		(CPG_BASE + 0x0088)
-#define HSICKCR		(CPG_BASE + 0x008C)
-#define FSIBCKCR	(CPG_BASE + 0x0090)
-#define MFCK1CR		(CPG_BASE + 0x0098)
-#define MFCK2CR		(CPG_BASE + 0x009C)
-#define DSITCKCR	(CPG_BASE + 0x0060)
-#define DSI0PCKCR	(CPG_BASE + 0x0064)
-#define DSI1PCKCR	(CPG_BASE + 0x0068)
-#define DSI0PHYCR	(CPG_BASE + 0x006C)
-#define DVFSCR3		(CPG_BASE + 0x0174)
-#define DVFSCR4		(CPG_BASE + 0x0178)
-#define DVFSCR5		(CPG_BASE + 0x017C)
-#define MPMODE		(CPG_BASE + 0x00CC)
-
-#define PLLECR		(CPG_BASE + 0x00D0)
-#define PLL0CR		(CPG_BASE + 0x00D8)
-#define PLL1CR		(CPG_BASE + 0x0028)
-#define PLL2CR		(CPG_BASE + 0x002C)
-#define PLL3CR		(CPG_BASE + 0x00DC)
-#define PLL0STPCR	(CPG_BASE + 0x00F0)
-#define PLL1STPCR	(CPG_BASE + 0x00C8)
-#define PLL2STPCR	(CPG_BASE + 0x00F8)
-#define PLL3STPCR	(CPG_BASE + 0x00FC)
-#define RMSTPCR0	(CPG_BASE + 0x0110)
-#define RMSTPCR1	(CPG_BASE + 0x0114)
-#define RMSTPCR2	(CPG_BASE + 0x0118)
-#define RMSTPCR3	(CPG_BASE + 0x011C)
-#define RMSTPCR4	(CPG_BASE + 0x0120)
-#define RMSTPCR5	(CPG_BASE + 0x0124)
-#define SMSTPCR0	(CPG_BASE + 0x0130)
-#define SMSTPCR2	(CPG_BASE + 0x0138)
-#define SMSTPCR3	(CPG_BASE + 0x013C)
-#define CPGXXCR4	(CPG_BASE + 0x0150)
-#define SRCR0		(CPG_BASE + 0x80A0)
-#define SRCR2		(CPG_BASE + 0x80B0)
-#define SRCR3		(CPG_BASE + 0x80A8)
-#define VREFCR		(CPG_BASE + 0x00EC)
-#define PCLKCR		(CPG_BASE + 0x1020)
-
-#define PORT32CR (0xE6051020)
-#define PORT33CR (0xE6051021)
-#define PORT34CR (0xE6051022)
-#define PORT35CR (0xE6051023)
-
-LIST "DRAM initialization code:"
-
-EW RWTCSRA0, 0xA507
-
-ED_AND LIFEC_SEC_SRC, 0xFFFF7FFF
-
-ED_AND SMSTPCR3,0xFFFF7FFF
-ED_AND SRCR3, 0xFFFF7FFF
-ED_AND SMSTPCR2,0xFFFBFFFF
-ED_AND SRCR2, 0xFFFBFFFF
-ED PLLECR, 0x00000000
-
-WAIT_MASK PLLECR, 0x00000F00, 0x00000000
-WAIT_MASK FRQCRB, 0x80000000, 0x00000000
-
-ED PLL0CR, 0x2D000000
-ED PLL1CR, 0x17100000
-ED FRQCRB, 0x96235880
-WAIT_MASK FRQCRB, 0x80000000, 0x00000000
-
-ED FLCKCR, 0x0000000B
-ED_AND SMSTPCR0, 0xFFFFFFFD
-
-ED_AND SRCR0, 0xFFFFFFFD
-ED 0xE6001628, 0x514
-ED 0xE6001648, 0x514
-ED 0xE6001658, 0x514
-ED 0xE6001678, 0x514
-
-ED DVFSCR4, 0x00092000
-ED DVFSCR5, 0x000000DC
-ED PLLECR, 0x00000000
-WAIT_MASK PLLECR, 0x00000F00, 0x00000000
-
-ED FRQCRA, 0x0012453C
-ED FRQCRB, 0x80431350
-WAIT_MASK FRQCRB, 0x80000000, 0x00000000
-ED FRQCRD, 0x00000B0B
-WAIT_MASK FRQCRD, 0x80000000, 0x00000000
-
-ED PCLKCR, 0x00000003
-ED VCLKCR1, 0x0000012F
-ED VCLKCR2, 0x00000119
-ED VCLKCR3, 0x00000119
-ED ZBCKCR, 0x00000002
-ED FLCKCR, 0x00000005
-ED SD0CKCR, 0x00000080
-ED SD1CKCR, 0x00000080
-ED SD2CKCR, 0x00000080
-ED FSIACKCR, 0x0000003F
-ED FSIBCKCR, 0x0000003F
-ED SUBCKCR, 0x00000080
-ED SPUACKCR, 0x0000000B
-ED SPUVCKCR, 0x0000000B
-ED MSUCKCR, 0x0000013F
-ED HSICKCR, 0x00000080
-ED MFCK1CR, 0x0000003F
-ED MFCK2CR, 0x0000003F
-ED DSITCKCR, 0x00000107
-ED DSI0PCKCR, 0x00000313
-ED DSI1PCKCR, 0x0000130D
-ED DSI0PHYCR, 0x2A800E0E
-ED PLL0CR, 0x1E000000
-ED PLL0CR, 0x2D000000
-ED PLL1CR, 0x17100000
-ED PLL2CR, 0x27000080
-ED PLL3CR, 0x1D000000
-ED PLL0STPCR, 0x00080000
-ED PLL1STPCR, 0x000120C0
-ED PLL2STPCR, 0x00012000
-ED PLL3STPCR, 0x00000030
-ED PLLECR, 0x0000000B
-WAIT_MASK PLLECR, 0x00000B00, 0x00000B00
-
-ED DVFSCR3, 0x000120F0
-ED MPMODE, 0x00000020
-ED VREFCR, 0x0000028A
-ED RMSTPCR0, 0xE4628087
-ED RMSTPCR1, 0xFFFFFFFF
-ED RMSTPCR2, 0x53FFFFFF
-ED RMSTPCR3, 0xFFFFFFFF
-ED RMSTPCR4, 0x00800D3D
-ED RMSTPCR5, 0xFFFFF3FF
-ED SMSTPCR2, 0x00000000
-ED SRCR2,  0x00040000
-ED_AND PLLECR, 0xFFFFFFF7
-WAIT_MASK PLLECR, 0x00000800, 0x00000000
-
-LIST "set SBSC operational"
-ED HPBCTRL6, 0x00000001
-WAIT_MASK HPBCTRL6, 0x00000001, 0x00000001
-
-LIST "set SBSC operating frequency"
-ED FRQCRD, 0x00001414
-WAIT_MASK FRQCRD, 0x80000000, 0x00000000
-ED PLL3CR, 0x1D000000
-ED_OR PLLECR, 0x00000008
-WAIT_MASK PLLECR, 0x00000800, 0x00000800
-
-LIST "enable DLL oscillation in DDRPHY"
-ED_OR DLLCNT0A, 0x00000002
-
-LIST "wait >= 100 ns"
-ED SDGENCNTA, 0x00000005
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "target LPDDR2 device settings"
-ED SDCR0A, 0xACC90159
-ED SDCR1A, 0x00010059
-ED SDWCRC0A, 0x50874114
-ED SDWCRC1A, 0x33199B37
-ED SDWCRC2A, 0x008F2313
-ED SDWCR00A, 0x31020707
-ED SDWCR01A, 0x0017040A
-ED SDWCR10A, 0x31020707
-ED SDWCR11A, 0x0017040A
-
-ED SDDRVCR0A, 0x055557ff
-
-ED SDWCR2A, 0x30000000
-
-LIST "drive CKE high"
-ED_OR SDPCRA, 0x00000080
-WAIT_MASK SDPCRA, 0x00000080, 0x00000080
-
-LIST "wait >= 200 us"
-ED SDGENCNTA, 0x00002710
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "issue reset command to LPDDR2 device"
-ED SDMRACR0A, 0x0000003F
-ED SDMRA1, 0x00000000
-
-LIST "wait >= 10 (or 1) us (docs inconsistent)"
-ED SDGENCNTA, 0x000001F4
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "MRW ZS initialization calibration command"
-ED SDMRACR0A, 0x0000FF0A
-ED SDMRA3, 0x00000000
-
-LIST "wait >= 1 us"
-ED SDGENCNTA, 0x00000032
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "specify operating mode in LPDDR2"
-ED SDMRACR0A, 0x00002201
-ED SDMRA1, 0x00000000
-ED SDMRACR0A, 0x00000402
-ED SDMRA1, 0x00000000
-ED SDMRACR0A, 0x00000203
-ED SDMRA1, 0x00000000
-
-LIST "initialize DDR interface"
-ED SDMRA2, 0x00000000
-
-LIST "temperature sensor control"
-ED SDMRTMPCRA, 0x88800004
-ED SDMRTMPMSKA,0x00000004
-
-LIST "auto-refreshing control"
-ED RTCORA, 0xA55A0032
-ED RTCORHA, 0xA55A000C
-ED RTCSRA, 0xA55A2048
-
-ED_OR SDCR0A, 0x00000800
-ED_OR SDCR1A, 0x00000400
-
-LIST "auto ZQ calibration control"
-ED ZQCCRA, 0xFFF20000
-
-ED_OR DLLCNT0B, 0x00000002
-ED SDGENCNTB, 0x00000005
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-
-ED SDCR0B, 0xACC90159
-ED SDCR1B, 0x00010059
-ED SDWCRC0B, 0x50874114
-ED SDWCRC1B, 0x33199B37
-ED SDWCRC2B, 0x008F2313
-ED SDWCR00B, 0x31020707
-ED SDWCR01B, 0x0017040A
-ED SDWCR10B, 0x31020707
-ED SDWCR11B, 0x0017040A
-ED SDDRVCR0B, 0x055557ff
-ED SDWCR2B, 0x30000000
-ED_OR SDPCRB, 0x00000080
-WAIT_MASK SDPCRB, 0x00000080, 0x00000080
-
-ED SDGENCNTB, 0x00002710
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-ED SDMRACR0B, 0x0000003F
-
-LIST "upstream u-boot writes to SDMRA1A for both SBSC 1 and 2, which does"
-LIST "not seem to make a lot of sense..."
-ED SDMRB1, 0x00000000
-
-ED SDGENCNTB, 0x000001F4
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-
-ED SDMRACR0B, 0x0000FF0A
-ED SDMRB3, 0x00000000
-ED SDGENCNTB, 0x00000032
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-
-ED SDMRACR0B, 0x00002201
-ED SDMRB1, 0x00000000
-ED SDMRACR0B, 0x00000402
-ED SDMRB1, 0x00000000
-ED SDMRACR0B, 0x00000203
-ED SDMRB1, 0x00000000
-ED SDMRB2, 0x00000000
-ED SDMRTMPCRB, 0x88800004
-ED SDMRTMPMSKB, 0x00000004
-ED RTCORB,  0xA55A0032
-ED RTCORHB, 0xA55A000C
-ED RTCSRB,  0xA55A2048
-ED_OR SDCR0B, 0x00000800
-ED_OR SDCR1B, 0x00000400
-ED ZQCCRB, 0xFFF20000
-ED_OR SDPDCR0B, 0x00030000
-ED DPHYCNT1B, 0xA5390000
-ED DPHYCNT0B, 0x00001200
-ED DPHYCNT1B, 0x07CE0000
-ED DPHYCNT0B, 0x00001247
-WAIT_MASK DPHYCNT2B, 0xFFFFFFFF, 0x07CE0000
-
-ED_AND SDPDCR0B, 0xFFFCFFFF
-
-ED FRQCRD, 0x00000B0B
-WAIT_MASK FRQCRD, 0x80000000, 0x00000000
-
-ED CPGXXCR4, 0xfffffffc
-
-LIST "Setup SCIF4 / workaround"
-EB PORT32CR, 0x12
-EB PORT33CR, 0x22
-EB PORT34CR, 0x12
-EB PORT35CR, 0x22
-
-EW 0xE6C80000, 0
-EB 0xE6C80004, 0x19
-EW 0xE6C80008, 0x0030
-EW 0xE6C80018, 0
-EW 0xE6C80030, 0x0014
-
-LIST "Magic to avoid hangs and corruption on DRAM writes."
-
-LIST "It has been observed that the system would most often hang while"
-LIST "decompressing the kernel, and if it didn't it would always write"
-LIST "a corrupt image to DRAM."
-LIST "This problem does not occur in u-boot, and the reason is that"
-LIST "u-boot performs an additional cache invalidation after setting up"
-LIST "the DRAM controller. Such an invalidation should not be necessary at"
-LIST "this point, and attempts at removing parts of the routine to arrive"
-LIST "at the minimal snippet of code necessary to avoid the DRAM stability"
-LIST "problem yielded the following:"
-
-MRC p15, 0, r0, c1, c0, 0
-MCR p15, 0, r0, c1, c0, 0
diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
index 175ee05465da..80f599f4b5ab 100644
--- a/arch/arm/mach-shmobile/include/mach/zboot.h
+++ b/arch/arm/mach-shmobile/include/mach/zboot.h
@@ -9,11 +9,6 @@
  *
  **************************************************/
 
-#ifdef CONFIG_MACH_KZM9G
-#define MEMORY_START	0x43000000
-#include "mach/head-kzm9g.txt"
-#else
 #error "unsupported board."
-#endif
 
 #endif /* ZBOOT_H */
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
deleted file mode 100644
index fd63ae6532fc..000000000000
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * sh73a0 processor support - INTC hardware block
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/arm-gic.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "intc.h"
-#include "irqs.h"
-#include "sh73a0.h"
-
-enum {
-	UNUSED = 0,
-
-	/* interrupt sources INTCS */
-	PINTCS_PINT1, PINTCS_PINT2,
-	RTDMAC_0_DEI0, RTDMAC_0_DEI1, RTDMAC_0_DEI2, RTDMAC_0_DEI3,
-	CEU, MFI, BBIF2, VPU, TSIF1, _3DG_SGX543, _2DDMAC_2DDM0,
-	RTDMAC_1_DEI4, RTDMAC_1_DEI5, RTDMAC_1_DADERR,
-	KEYSC_KEY, VINT, MSIOF,
-	TMU0_TUNI00, TMU0_TUNI01, TMU0_TUNI02,
-	CMT0, TSIF0, CMT2, LMB, MSUG, MSU_MSU, MSU_MSU2,
-	CTI, RWDT0, ICB, PEP, ASA, JPU_JPEG, LCDC, LCRC,
-	RTDMAC_2_DEI6, RTDMAC_2_DEI7, RTDMAC_2_DEI8, RTDMAC_2_DEI9,
-	RTDMAC_3_DEI10, RTDMAC_3_DEI11,
-	FRC, GCU, LCDC1, CSIRX,
-	DSITX0_DSITX00, DSITX0_DSITX01,
-	SPU2_SPU0, SPU2_SPU1, FSI,
-	TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12,
-	TSIF2, CMT4, MFIS2, CPORTS2R, TSG, DMASCH1, SCUW,
-	VIO60, VIO61, CEU21, CSI21, DSITX1_DSITX10, DSITX1_DSITX11,
-	DISP, DSRV, EMUX2_EMUX20I, EMUX2_EMUX21I,
-	MSTIF0_MST00I, MSTIF0_MST01I, MSTIF1_MST10I, MSTIF1_MST11I,
-	SPUV,
-
-	/* interrupt groups INTCS */
-	RTDMAC_0, RTDMAC_1, RTDMAC_2, RTDMAC_3,
-	DSITX0, SPU2, TMU1, MSU,
-};
-
-static struct intc_vect intcs_vectors[] = {
-	INTCS_VECT(PINTCS_PINT1, 0x0600), INTCS_VECT(PINTCS_PINT2, 0x0620),
-	INTCS_VECT(RTDMAC_0_DEI0, 0x0800), INTCS_VECT(RTDMAC_0_DEI1, 0x0820),
-	INTCS_VECT(RTDMAC_0_DEI2, 0x0840), INTCS_VECT(RTDMAC_0_DEI3, 0x0860),
-	INTCS_VECT(CEU, 0x0880), INTCS_VECT(MFI, 0x0900),
-	INTCS_VECT(BBIF2, 0x0960), INTCS_VECT(VPU, 0x0980),
-	INTCS_VECT(TSIF1, 0x09a0), INTCS_VECT(_3DG_SGX543, 0x09e0),
-	INTCS_VECT(_2DDMAC_2DDM0, 0x0a00),
-	INTCS_VECT(RTDMAC_1_DEI4, 0x0b80), INTCS_VECT(RTDMAC_1_DEI5, 0x0ba0),
-	INTCS_VECT(RTDMAC_1_DADERR, 0x0bc0),
-	INTCS_VECT(KEYSC_KEY, 0x0be0), INTCS_VECT(VINT, 0x0c80),
-	INTCS_VECT(MSIOF, 0x0d20),
-	INTCS_VECT(TMU0_TUNI00, 0x0e80), INTCS_VECT(TMU0_TUNI01, 0x0ea0),
-	INTCS_VECT(TMU0_TUNI02, 0x0ec0),
-	INTCS_VECT(CMT0, 0x0f00), INTCS_VECT(TSIF0, 0x0f20),
-	INTCS_VECT(CMT2, 0x0f40), INTCS_VECT(LMB, 0x0f60),
-	INTCS_VECT(MSUG, 0x0f80),
-	INTCS_VECT(MSU_MSU, 0x0fa0), INTCS_VECT(MSU_MSU2, 0x0fc0),
-	INTCS_VECT(CTI, 0x0400), INTCS_VECT(RWDT0, 0x0440),
-	INTCS_VECT(ICB, 0x0480), INTCS_VECT(PEP, 0x04a0),
-	INTCS_VECT(ASA, 0x04c0), INTCS_VECT(JPU_JPEG, 0x0560),
-	INTCS_VECT(LCDC, 0x0580), INTCS_VECT(LCRC, 0x05a0),
-	INTCS_VECT(RTDMAC_2_DEI6, 0x1300), INTCS_VECT(RTDMAC_2_DEI7, 0x1320),
-	INTCS_VECT(RTDMAC_2_DEI8, 0x1340), INTCS_VECT(RTDMAC_2_DEI9, 0x1360),
-	INTCS_VECT(RTDMAC_3_DEI10, 0x1380), INTCS_VECT(RTDMAC_3_DEI11, 0x13a0),
-	INTCS_VECT(FRC, 0x1700), INTCS_VECT(GCU, 0x1760),
-	INTCS_VECT(LCDC1, 0x1780), INTCS_VECT(CSIRX, 0x17a0),
-	INTCS_VECT(DSITX0_DSITX00, 0x17c0), INTCS_VECT(DSITX0_DSITX01, 0x17e0),
-	INTCS_VECT(SPU2_SPU0, 0x1800), INTCS_VECT(SPU2_SPU1, 0x1820),
-	INTCS_VECT(FSI, 0x1840),
-	INTCS_VECT(TMU1_TUNI10, 0x1900), INTCS_VECT(TMU1_TUNI11, 0x1920),
-	INTCS_VECT(TMU1_TUNI12, 0x1940),
-	INTCS_VECT(TSIF2, 0x1960), INTCS_VECT(CMT4, 0x1980),
-	INTCS_VECT(MFIS2, 0x1a00), INTCS_VECT(CPORTS2R, 0x1a20),
-	INTCS_VECT(TSG, 0x1ae0), INTCS_VECT(DMASCH1, 0x1b00),
-	INTCS_VECT(SCUW, 0x1b40),
-	INTCS_VECT(VIO60, 0x1b60), INTCS_VECT(VIO61, 0x1b80),
-	INTCS_VECT(CEU21, 0x1ba0), INTCS_VECT(CSI21, 0x1be0),
-	INTCS_VECT(DSITX1_DSITX10, 0x1c00), INTCS_VECT(DSITX1_DSITX11, 0x1c20),
-	INTCS_VECT(DISP, 0x1c40), INTCS_VECT(DSRV, 0x1c60),
-	INTCS_VECT(EMUX2_EMUX20I, 0x1c80), INTCS_VECT(EMUX2_EMUX21I, 0x1ca0),
-	INTCS_VECT(MSTIF0_MST00I, 0x1cc0), INTCS_VECT(MSTIF0_MST01I, 0x1ce0),
-	INTCS_VECT(MSTIF1_MST10I, 0x1d00), INTCS_VECT(MSTIF1_MST11I, 0x1d20),
-	INTCS_VECT(SPUV, 0x2300),
-};
-
-static struct intc_group intcs_groups[] __initdata = {
-	INTC_GROUP(RTDMAC_0, RTDMAC_0_DEI0, RTDMAC_0_DEI1,
-		   RTDMAC_0_DEI2, RTDMAC_0_DEI3),
-	INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI4, RTDMAC_1_DEI5, RTDMAC_1_DADERR),
-	INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI6, RTDMAC_2_DEI7,
-		   RTDMAC_2_DEI8, RTDMAC_2_DEI9),
-	INTC_GROUP(RTDMAC_3, RTDMAC_3_DEI10, RTDMAC_3_DEI11),
-	INTC_GROUP(TMU1, TMU1_TUNI12, TMU1_TUNI11, TMU1_TUNI10),
-	INTC_GROUP(DSITX0, DSITX0_DSITX00, DSITX0_DSITX01),
-	INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
-	INTC_GROUP(MSU, MSU_MSU, MSU_MSU2),
-};
-
-static struct intc_mask_reg intcs_mask_registers[] = {
-	{ 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
-	  { 0, 0, 0, CEU,
-	    0, 0, 0, 0 } },
-	{ 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
-	  { 0, 0, 0, VPU,
-	    BBIF2, 0, 0, MFI } },
-	{ 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
-	  { 0, 0, 0, _2DDMAC_2DDM0,
-	    0, ASA, PEP, ICB } },
-	{ 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
-	  { 0, 0, 0, CTI,
-	    JPU_JPEG, 0, LCRC, LCDC } },
-	{ 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
-	  { KEYSC_KEY, RTDMAC_1_DADERR, RTDMAC_1_DEI5, RTDMAC_1_DEI4,
-	    RTDMAC_0_DEI3, RTDMAC_0_DEI2, RTDMAC_0_DEI1, RTDMAC_0_DEI0 } },
-	{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
-	  { 0, 0, MSIOF, 0,
-	    _3DG_SGX543, 0, 0, 0 } },
-	{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
-	  { 0, TMU0_TUNI02, TMU0_TUNI01, TMU0_TUNI00,
-	    0, 0, 0, 0 } },
-	{ 0xffd201a0, 0xffd201e0, 8, /* IMR8SA / IMCR8SA */
-	  { 0, 0, 0, 0,
-	    0, MSU_MSU, MSU_MSU2, MSUG } },
-	{ 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
-	  { 0, RWDT0, CMT2, CMT0,
-	    0, 0, 0, 0 } },
-	{ 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
-	  { 0, 0, 0, 0,
-	    0, TSIF1, LMB, TSIF0 } },
-	{ 0xffd201b0, 0xffd201f0, 8, /* IMR12SA / IMCR12SA */
-	  { 0, 0, 0, 0,
-	    0, 0, PINTCS_PINT2, PINTCS_PINT1 } },
-	{ 0xffd50180, 0xffd501c0, 8, /* IMR0SA3 / IMCR0SA3 */
-	  { RTDMAC_2_DEI6, RTDMAC_2_DEI7, RTDMAC_2_DEI8, RTDMAC_2_DEI9,
-	    RTDMAC_3_DEI10, RTDMAC_3_DEI11, 0, 0 } },
-	{ 0xffd50190, 0xffd501d0, 8, /* IMR4SA3 / IMCR4SA3 */
-	  { FRC, 0, 0, GCU,
-	    LCDC1, CSIRX, DSITX0_DSITX00, DSITX0_DSITX01 } },
-	{ 0xffd50194, 0xffd501d4, 8, /* IMR5SA3 / IMCR5SA3 */
-	  { SPU2_SPU0, SPU2_SPU1, FSI, 0,
-	    0, 0, 0, 0 } },
-	{ 0xffd50198, 0xffd501d8, 8, /* IMR6SA3 / IMCR6SA3 */
-	  { TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, 0,
-	    TSIF2, CMT4, 0, 0 } },
-	{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
-	  { MFIS2, CPORTS2R, 0, 0,
-	    0, 0, 0, TSG } },
-	{ 0xffd501a0, 0xffd501e0, 8, /* IMR8SA3 / IMCR8SA3 */
-	  { DMASCH1, 0, SCUW, VIO60,
-	    VIO61, CEU21, 0, CSI21 } },
-	{ 0xffd501a4, 0xffd501e4, 8, /* IMR9SA3 / IMCR9SA3 */
-	  { DSITX1_DSITX10, DSITX1_DSITX11, DISP, DSRV,
-	    EMUX2_EMUX20I, EMUX2_EMUX21I, MSTIF0_MST00I, MSTIF0_MST01I } },
-	{ 0xffd501a8, 0xffd501e8, 8, /* IMR10SA3 / IMCR10SA3 */
-	  { MSTIF0_MST00I, MSTIF0_MST01I, 0, 0,
-	    0, 0, 0, 0  } },
-	{ 0xffd60180, 0xffd601c0, 8, /* IMR0SA4 / IMCR0SA4 */
-	  { SPUV, 0, 0, 0,
-	    0, 0, 0, 0  } },
-};
-
-/* Priority is needed for INTCA to receive the INTCS interrupt */
-static struct intc_prio_reg intcs_prio_registers[] = {
-	{ 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, 0, _2DDMAC_2DDM0, ICB } },
-	{ 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU_JPEG, LCDC, 0, LCRC } },
-	{ 0xffd20008, 0, 16, 4, /* IPRCS */ { BBIF2, 0, 0, 0 } },
-	{ 0xffd2000c, 0, 16, 4, /* IPRDS */ { PINTCS_PINT1, PINTCS_PINT2,
-					      0, 0 } },
-	{ 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_0, CEU, MFI, VPU } },
-	{ 0xffd20014, 0, 16, 4, /* IPRFS */ { KEYSC_KEY, RTDMAC_1,
-					      CMT2, CMT0 } },
-	{ 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU0_TUNI00, TMU0_TUNI01,
-					      TMU0_TUNI02, TSIF1 } },
-	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { VINT, 0, 0, 0 } },
-	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, 0 } },
-	{ 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX543, MSUG, MSU } },
-	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, ASA, LMB, PEP } },
-	{ 0xffd20030, 0, 16, 4, /* IPRMS */ { 0, 0, 0, RWDT0 } },
-	{ 0xffd50000, 0, 16, 4, /* IPRAS3 */ { RTDMAC_2, 0, 0, 0 } },
-	{ 0xffd50004, 0, 16, 4, /* IPRBS3 */ { RTDMAC_3, 0, 0, 0 } },
-	{ 0xffd50020, 0, 16, 4, /* IPRIS3 */ { FRC, 0, 0, 0 } },
-	{ 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, CSIRX, DSITX0, 0 } },
-	{ 0xffd50028, 0, 16, 4, /* IPRKS3 */ { SPU2, 0, FSI, 0 } },
-	{ 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, TSIF2 } },
-	{ 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, 0, 0, 0 } },
-	{ 0xffd50038, 0, 16, 4, /* IPROS3 */ { MFIS2, CPORTS2R, 0, 0 } },
-	{ 0xffd50040, 0, 16, 4, /* IPRQS3 */ { DMASCH1, 0, SCUW, VIO60 } },
-	{ 0xffd50044, 0, 16, 4, /* IPRRS3 */ { VIO61, CEU21, 0, CSI21 } },
-	{ 0xffd50048, 0, 16, 4, /* IPRSS3 */ { DSITX1_DSITX10, DSITX1_DSITX11,
-					       DISP, DSRV } },
-	{ 0xffd5004c, 0, 16, 4, /* IPRTS3 */ { EMUX2_EMUX20I, EMUX2_EMUX21I,
-					       MSTIF0_MST00I, MSTIF0_MST01I } },
-	{ 0xffd50050, 0, 16, 4, /* IPRUS3 */ { MSTIF1_MST10I, MSTIF1_MST11I,
-					       0, 0 } },
-	{ 0xffd60000, 0, 16, 4, /* IPRAS4 */ { SPUV, 0, 0, 0 } },
-};
-
-static struct resource intcs_resources[] __initdata = {
-	[0] = {
-		.start	= 0xffd20000,
-		.end	= 0xffd201ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xffd50000,
-		.end	= 0xffd501ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 0xffd60000,
-		.end	= 0xffd601ff,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct intc_desc intcs_desc __initdata = {
-	.name = "sh73a0-intcs",
-	.resource = intcs_resources,
-	.num_resources = ARRAY_SIZE(intcs_resources),
-	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
-			   intcs_prio_registers, NULL, NULL),
-};
-
-static struct irqaction sh73a0_intcs_cascade;
-
-static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id)
-{
-	unsigned int evtcodeas = ioread32((void __iomem *)dev_id);
-
-	generic_handle_irq(intcs_evt2irq(evtcodeas));
-
-	return IRQ_HANDLED;
-}
-
-#define PINTER0_PHYS 0xe69000a0
-#define PINTER1_PHYS 0xe69000a4
-#define PINTER0_VIRT IOMEM(0xe69000a0)
-#define PINTER1_VIRT IOMEM(0xe69000a4)
-#define PINTRR0 IOMEM(0xe69000d0)
-#define PINTRR1 IOMEM(0xe69000d4)
-
-#define PINT0A_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq))
-#define PINT0B_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 8))
-#define PINT0C_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 16))
-#define PINT0D_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 24))
-#define PINT1E_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT1_IRQ(irq))
-
-INTC_PINT(intc_pint0, PINTER0_PHYS, 0xe69000b0, "sh73a0-pint0",		\
-  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D),	\
-  INTC_PINT_V(A, PINT0A_IRQ), INTC_PINT_V(B, PINT0B_IRQ),		\
-  INTC_PINT_V(C, PINT0C_IRQ), INTC_PINT_V(D, PINT0D_IRQ),		\
-  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D),	\
-  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D));
-
-INTC_PINT(intc_pint1, PINTER1_PHYS, 0xe69000c0, "sh73a0-pint1",		\
-  INTC_PINT_E(E), INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, \
-  INTC_PINT_V(E, PINT1E_IRQ), INTC_PINT_V_NONE,				\
-  INTC_PINT_V_NONE, INTC_PINT_V_NONE,					\
-  INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E(E), \
-  INTC_PINT_E(E), INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE);
-
-static struct irqaction sh73a0_pint0_cascade;
-static struct irqaction sh73a0_pint1_cascade;
-
-static void pint_demux(void __iomem *rr, void __iomem *er, int base_irq)
-{
-	unsigned long value =  ioread32(rr) & ioread32(er);
-	int k;
-
-	for (k = 0; k < 32; k++) {
-		if (value & (1 << (31 - k))) {
-			generic_handle_irq(base_irq + k);
-			iowrite32(~(1 << (31 - k)), rr);
-		}
-	}
-}
-
-static irqreturn_t sh73a0_pint0_demux(int irq, void *dev_id)
-{
-	pint_demux(PINTRR0, PINTER0_VIRT, SH73A0_PINT0_IRQ(0));
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t sh73a0_pint1_demux(int irq, void *dev_id)
-{
-	pint_demux(PINTRR1, PINTER1_VIRT, SH73A0_PINT1_IRQ(0));
-	return IRQ_HANDLED;
-}
-
-void __init sh73a0_init_irq(void)
-{
-	void __iomem *gic_dist_base = IOMEM(0xf0001000);
-	void __iomem *gic_cpu_base = IOMEM(0xf0000100);
-	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
-
-	gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE);
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
-	register_intc_controller(&intcs_desc);
-	register_intc_controller(&intc_pint0_desc);
-	register_intc_controller(&intc_pint1_desc);
-
-	/* demux using INTEVTSA */
-	sh73a0_intcs_cascade.name = "INTCS cascade";
-	sh73a0_intcs_cascade.handler = sh73a0_intcs_demux;
-	sh73a0_intcs_cascade.dev_id = intevtsa;
-	setup_irq(gic_spi(50), &sh73a0_intcs_cascade);
-
-	/* PINT pins are sanely tied to the GIC as SPI */
-	sh73a0_pint0_cascade.name = "PINT0 cascade";
-	sh73a0_pint0_cascade.handler = sh73a0_pint0_demux;
-	setup_irq(gic_spi(33), &sh73a0_pint0_cascade);
-
-	sh73a0_pint1_cascade.name = "PINT1 cascade";
-	sh73a0_pint1_cascade.handler = sh73a0_pint1_demux;
-	setup_irq(gic_spi(34), &sh73a0_pint1_cascade);
-}
-- 
2.1.4




More information about the linux-arm-kernel mailing list