[PATCH v2 2/2] ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev

[Chen-Yu Tsai]

On Sat, Aug 1, 2015 at 1:01 AM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> On Fri, Jul 31, 2015 at 10:56:42PM +0800, Chen-Yu Tsai wrote:
>> Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and
>> sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it.
>>
>> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
>> ---
>>  arch/arm/configs/multi_v7_defconfig | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
>> index 5fd8df6f50ea..5eaf39ce134e 100644
>> --- a/arch/arm/configs/multi_v7_defconfig
>> +++ b/arch/arm/configs/multi_v7_defconfig
>> @@ -301,6 +301,7 @@ CONFIG_I2C_S3C2410=y
>>  CONFIG_I2C_SH_MOBILE=y
>>  CONFIG_I2C_SIRF=y
>>  CONFIG_I2C_ST=y
>> +CONFIG_I2C_SUN6I_P2WI=y
>>  CONFIG_I2C_TEGRA=y
>>  CONFIG_I2C_XILINX=y
>>  CONFIG_I2C_RCAR=y
>> @@ -587,6 +588,7 @@ CONFIG_IMX_DMA=y
>>  CONFIG_MXS_DMA=y
>>  CONFIG_DMA_OMAP=y
>>  CONFIG_XILINX_VDMA=y
>> +CONFIG_DMA_SUN6I=y
>>  CONFIG_STAGING=y
>>  CONFIG_SENSORS_ISL29018=y
>>  CONFIG_SENSORS_ISL29028=y
>> @@ -612,6 +614,7 @@ CONFIG_TEGRA_IOMMU_SMMU=y
>>  CONFIG_PM_DEVFREQ=y
>>  CONFIG_ARM_TEGRA_DEVFREQ=m
>>  CONFIG_MEMORY=y
>> +CONFIG_EXTCON=y
>>  CONFIG_TI_AEMIF=y
>>  CONFIG_IIO=y
>>  CONFIG_AT91_ADC=m
>> @@ -622,6 +625,7 @@ CONFIG_PWM_ATMEL=m
>>  CONFIG_PWM_ATMEL_TCB=m
>>  CONFIG_PWM_RENESAS_TPU=y
>>  CONFIG_PWM_SAMSUNG=m
>> +CONFIG_PWM_SUN4I=y
>>  CONFIG_PWM_TEGRA=y
>>  CONFIG_PWM_VT8500=y
>>  CONFIG_PHY_HIX5HD2_SATA=y
>> @@ -660,6 +664,7 @@ CONFIG_LOCKUP_DETECTOR=y
>>  CONFIG_CRYPTO_DEV_TEGRA_AES=y
>>  CONFIG_CPUFREQ_DT=y
>>  CONFIG_KEYSTONE_IRQ=y
>> +CONFIG_CRYPTO_DEV_SUN4I_SS=m

It seems everything under crypto that is enabled and can be built as
a module (i.e. no one selects it as builtin) is enabled as a module.
I just followed everything else.

Hope this helps.


ChenYu