[PATCH, v3 3/3] ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR

[Claudiu Manoil]

This enables the available eTSEC ethernet ports for the
ls1021aqds and ls1021atwr boards.
For the QDS, SGMII connections (via riser cards) are assumed
for the eTSEC0 and eTSEC1 ports as default configuration.

Signed-off-by: Alison Wang <alison.wang at freescale.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil at freescale.com>
---
v2, v3 - none;

 arch/arm/boot/dts/ls1021a-qds.dts | 20 ++++++++++++++++++++
 arch/arm/boot/dts/ls1021a-twr.dts | 20 ++++++++++++++++++++
 2 files changed, 40 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 9c5e16b..f16a061 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -75,6 +75,26 @@
 	};
 };
 
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1c>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1d>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy3>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index a2c591e..4b61766 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -73,6 +73,26 @@
 	};
 };
 
+&enet0 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy2>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy0>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 };
-- 
1.7.11.7