[PATCH v4 4/5] Documentation: DT: Add Hisilicon PCIe host binding

[Zhou Wang]

On 2015/7/22 7:02, Bjorn Helgaas wrote:
> [+cc Rob]
> 
> On Tue, Jul 21, 2015 at 02:48:42PM +0800, Zhou Wang wrote:
>> This patch adds related DTS binding document for Hisilicon PCIe host driver.
>>
>> Signed-off-by: Zhou Wang <wangzhou1 at hisilicon.com>
> 
> If I merge this via my tree, I'm looking for an ack from Arnd and/or Rob
> here.
> 
>> ---
>>  .../devicetree/bindings/pci/hisilicon-pcie.txt     | 46 ++++++++++++++++++++++
>>  1 file changed, 46 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
>>
>> diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
>> new file mode 100644
>> index 0000000..6c9b827
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
>> @@ -0,0 +1,46 @@
>> +Hisilicon PCIe host bridge DT description
> 
> Even the website at http://hisilicon.com isn't consistent, but there is
> some indication that the correct capitalization would be "HiSilicon".
> Since this is English text, feel free to capitalize it correctly here :)
>

Hi Bjorn,

I checked with related colleagues about this. It should be "HiSilicon" as
formal name. Thanks for pointing this :)

> Similarly, Synopsys seems to use "DesignWare," so I try to use that when
> it makes sense.
> 
>> +Hisilicon PCIe host controller is based on Designware PCI core.
>> +It shares common functions with PCIe Designware core driver and inherits
>> +common properties defined in
>> +Documentation/devicetree/bindings/pci/designware-pci.txt.
>> +
>> +Additional properties are described here:
>> +
>> +Required properties:
>> +- compatible: Should contain "hisilicon,hip05-pcie".
>> +- reg: Should contain rc_dbi, subctrl, config registers location and length.
>> +- reg-names: Must include the following entries:
>> +  "rc_dbi": controller configuration registers;
>> +  "subctrl": whole PCIe hosts configuration registers;
>> +  "config": PCIe configuration space registers.
>> +- msi-parent: Should be its_pcie which is an its receiving MSI interrupts.
> 
> I guess "its" here is an abbreviation for something; if so, this would read
> better as "... which is an ITS receiving ..."
> 

It is ITS(Interrupt Translation Service) in GIC v3. Will modify it.

>> +- port-id: Should be 0, 1, 2 or 3.
>> +
>> +Optional properties:
>> +- status: Either "ok" or "disabled".
>> +- dma-coherent: Present if dma operations are coherent.
> 
> "if DMA operations"
>

Thanks, will modify this.

Best regards,
Zhou

>> +
>> +Example:
>> +	pcie at 0xb0080000 {
>> +		compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
>> +		reg = <0 0xb0080000 0 0x10000>, <0 0xb0000000 0 0x10000>,
>> +		      <0x220 0x00000000 0 0x2000>;
>> +		reg-names = "rc_dbi", "subctrl", "config";
>> +		bus-range = <0  15>;
>> +		msi-parent = <&its_pcie>;
>> +		#address-cells = <3>;
>> +		#size-cells = <2>;
>> +		device_type = "pci";
>> +		dma-coherent;
>> +		ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>;
>> +		num-lanes = <8>;
>> +		port-id = <1>;
>> +		#interrupts-cells = <1>;
>> +		interrupts-map-mask = <0xf800 0 0 7>;
>> +		interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10
>> +				  0x0 0 0 2 &mbigen_pcie 2 11
>> +				  0x0 0 0 3 &mbigen_pcie 3 12
>> +				  0x0 0 0 4 &mbigen_pcie 4 13>;
>> +		status = "ok";
>> +	};
>> -- 
>> 1.9.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> .
>