[PATCH v3 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173

[chunfeng yun]

hi
On Wed, 2015-07-22 at 21:11 +0300, Sergei Shtylyov wrote:
> Hello.
> 
> On 07/22/2015 05:05 PM, Chunfeng Yun wrote:
> 
> > add xHCI and phy drivers for MT8173-EVB
> 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
> > ---
> >   arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 15 ++++++++++++++
> >   arch/arm64/boot/dts/mediatek/mt8173.dtsi    | 31 +++++++++++++++++++++++++++++
> >   2 files changed, 46 insertions(+)
> 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> > index f433c21..202b2b9 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> > @@ -13,6 +13,7 @@
> >    */
> >
> >   /dts-v1/;
> > +#include <dt-bindings/gpio/gpio.h>
> >   #include "mt8173.dtsi"
> >
> >   / {
> > @@ -32,6 +33,15 @@
> >   	};
> >
> >   	chosen { };
> > +
> > +	usb_p1_vbus: fixedregulator at 0 {
> 
>     Just "regulator at 0" please. This is more in line with what ePAPR requires 
> from the node names.
> 
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "usb_vbus";
> > +		regulator-min-microvolt = <5000000>;
> > +		regulator-max-microvolt = <5000000>;
> > +		gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
> > +		enable-active-high;
> > +	};
> >   };
> >
> >   &pwrap {
> [...]
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > index 0696f8f..aa1ecc7 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> [...]
> > @@ -393,6 +394,36 @@
> >   			#size-cells = <0>;
> >   			status = "disabled";
> >   		};
> > +
> > +		usb: usb30 at 11270000 {
> 
>     ePAPR standardizes the name "usb" for such nodes, please fix.
> 
> [...]
> 
ok, I'll revise it, thanks a lot

> MBR, Sergei
>