[PATCH v2] thermal: consistently use int for temperatures
Zhang, Rui
rui.zhang at intel.com
Tue Jul 21 06:35:31 PDT 2015
> -----Original Message-----
> From: Punit Agrawal [mailto:punit.agrawal at arm.com]
> Sent: Tuesday, July 21, 2015 6:52 PM
> To: Sascha Hauer
> Cc: linux-pm at vger.kernel.org; Zhang, Rui; Eduardo Valentin; linux-
> kernel at vger.kernel.org; Jean Delvare; Peter Feuerer; Heiko Stuebner;
> Lukasz Majewski; Stephen Warren; Thierry Reding; linux-
> acpi at vger.kernel.org; platform-driver-x86 at vger.kernel.org; linux-arm-
> kernel at lists.infradead.org; linux-omap at vger.kernel.org; linux-samsung-
> soc at vger.kernel.org; Guenter Roeck; Rafael J. Wysocki; Maxime Ripard;
> Darren Hart; lm-sensors at lm-sensors.org
> Subject: Re: [PATCH v2] thermal: consistently use int for temperatures
> Importance: High
>
> Hi Sascha,
>
> Sascha Hauer <s.hauer at pengutronix.de> writes:
>
> > The thermal code uses int, long and unsigned long for temperatures in
> > different places.
> >
> > Using an unsigned type limits the thermal framework to positive
> > temperatures without need. Also several drivers currently will report
> > temperatures near UINT_MAX for temperatures below 0°C. This will
> > probably immediately shut the machine down due to overtemperature if
> > started below 0°C.
> >
> > 'long' is 64bit on several architectures. This is not needed since
> > INT_MAX °mC is above the melting point of all known materials.
> >
> > Consistently use a plain 'int' for temperatures throughout the thermal
> > code and the drivers. This only changes the places in the drivers
> > where the temperature is passed around as pointer, when drivers
> > internally use another type this is not changed.
> >
> > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> > Acked-by: Geert Uytterhoeven <geert+renesas at glider.be>
> > Reviewed-by: Jean Delvare <jdelvare at suse.de>
> > Reviewed-by: Lukasz Majewski <l.majewski at samsung.com>
> > Reviewed-by: Darren Hart <dvhart at linux.intel.com>
> > Reviewed-by: Heiko Stuebner <heiko at sntech.de>
> > Reviewed-by: Peter Feuerer <peter at piie.net>
> > Cc: Punit Agrawal <punit.agrawal at arm.com>
>
> The changes below look good.
>
> For the power_allocator governor and corresponding trace events,
>
> Reviewed-by: Punit Agrawal <punit.agrawal at arm.com>
>
> Thanks
>
> > Cc: Zhang Rui <rui.zhang at intel.com>
> > Cc: Eduardo Valentin <edubezval at gmail.com>
> > Cc: linux-pm at vger.kernel.org
> > Cc: linux-kernel at vger.kernel.org
> > Cc: Jean Delvare <jdelvare at suse.de>
> > Cc: Peter Feuerer <peter at piie.net>
> > Cc: Heiko Stuebner <heiko at sntech.de>
> > Cc: Lukasz Majewski <l.majewski at samsung.com>
> > Cc: Stephen Warren <swarren at wwwdotorg.org>
> > Cc: Thierry Reding <thierry.reding at gmail.com>
> > Cc: linux-acpi at vger.kernel.org
> > Cc: platform-driver-x86 at vger.kernel.org
> > Cc: linux-arm-kernel at lists.infradead.org
> > Cc: linux-omap at vger.kernel.org
> > Cc: linux-samsung-soc at vger.kernel.org
> > Cc: Guenter Roeck <linux at roeck-us.net>
> > Cc: Rafael J. Wysocki <rjw at rjwysocki.net>
> > Cc: Maxime Ripard <maxime.ripard at free-electrons.com>
> > Cc: Darren Hart <dvhart at infradead.org>
> > Cc: lm-sensors at lm-sensors.org
> > ---
> >
Patch applied.
Thanks,
rui
> > changes since v1:
> > - Add missing pieces for power_allocator driver
> >
> > drivers/acpi/thermal.c | 12 +++++-----
> > drivers/hwmon/lm75.c | 2 +-
> > drivers/hwmon/ntc_thermistor.c | 2 +-
> > drivers/hwmon/tmp102.c | 2 +-
> > drivers/input/touchscreen/sun4i-ts.c | 8 +++----
> > drivers/platform/x86/acerhdf.c | 9 ++++----
> > drivers/platform/x86/intel_mid_thermal.c | 9 ++++----
> > drivers/power/power_supply_core.c | 2 +-
> > drivers/thermal/armada_thermal.c | 2 +-
> > drivers/thermal/db8500_thermal.c | 7 +++---
> > drivers/thermal/dove_thermal.c | 2 +-
> > drivers/thermal/fair_share.c | 2 +-
> > drivers/thermal/gov_bang_bang.c | 5 ++--
> > drivers/thermal/hisi_thermal.c | 4 ++--
> > drivers/thermal/imx_thermal.c | 27 +++++++++++-----------
> > drivers/thermal/int340x_thermal/int3400_thermal.c | 2 +-
> > .../thermal/int340x_thermal/int340x_thermal_zone.c | 10 ++++----
> > .../thermal/int340x_thermal/int340x_thermal_zone.h | 8 +++----
> > .../int340x_thermal/processor_thermal_device.c | 4 ++--
> > drivers/thermal/intel_quark_dts_thermal.c | 13 +++++------
> > drivers/thermal/intel_soc_dts_iosf.c | 8 +++----
> > drivers/thermal/kirkwood_thermal.c | 2 +-
> > drivers/thermal/of-thermal.c | 14 +++++------
> > drivers/thermal/power_allocator.c | 16 ++++++-------
> > drivers/thermal/qcom-spmi-temp-alarm.c | 2 +-
> > drivers/thermal/rcar_thermal.c | 7 +++---
> > drivers/thermal/rockchip_thermal.c | 10 ++++----
> > drivers/thermal/samsung/exynos_tmu.c | 23 +++++++++---------
> > drivers/thermal/spear_thermal.c | 2 +-
> > drivers/thermal/st/st_thermal.c | 5 ++--
> > drivers/thermal/step_wise.c | 4 ++--
> > drivers/thermal/tegra_soctherm.c | 4 ++--
> > drivers/thermal/thermal_core.c | 26 ++++++++++-----------
> > drivers/thermal/thermal_hwmon.c | 10 ++++----
> > drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 10 ++++----
> > drivers/thermal/x86_pkg_temp_thermal.c | 10 ++++----
> > include/linux/thermal.h | 26 +++++++++------------
> > include/trace/events/thermal_power_allocator.h | 6 ++---
> > 38 files changed, 151 insertions(+), 166 deletions(-)
> >
>
> [...]
>
> > diff --git a/drivers/thermal/power_allocator.c
> > b/drivers/thermal/power_allocator.c
> > index 4672250..045aea59 100644
> > --- a/drivers/thermal/power_allocator.c
> > +++ b/drivers/thermal/power_allocator.c
> > @@ -92,8 +92,8 @@ struct power_allocator_params {
> > * Return: The power budget for the next period.
> > */
> > static u32 pid_controller(struct thermal_zone_device *tz,
> > - unsigned long current_temp,
> > - unsigned long control_temp,
> > + int current_temp,
> > + int control_temp,
> > u32 max_allocatable_power)
> > {
> > s64 p, i, d, power_range;
> > @@ -102,7 +102,7 @@ static u32 pid_controller(struct
> > thermal_zone_device *tz,
> >
> > max_power_frac = int_to_frac(max_allocatable_power);
> >
> > - err = ((s32)control_temp - (s32)current_temp);
> > + err = control_temp - current_temp;
> > err = int_to_frac(err);
> >
> > /* Calculate the proportional term */ @@ -223,8 +223,8 @@ static
> > void divvy_up_power(u32 *req_power, u32 *max_power, int
> num_actors, }
> >
> > static int allocate_power(struct thermal_zone_device *tz,
> > - unsigned long current_temp,
> > - unsigned long control_temp)
> > + int current_temp,
> > + int control_temp)
> > {
> > struct thermal_instance *instance;
> > struct power_allocator_params *params = tz->governor_data; @@ -
> 326,7
> > +326,7 @@ static int allocate_power(struct thermal_zone_device *tz,
> > granted_power, total_granted_power,
> > num_actors, power_range,
> > max_allocatable_power, current_temp,
> > - (s32)control_temp - (s32)current_temp);
> > + control_temp - current_temp);
> >
> > devm_kfree(&tz->device, req_power);
> > unlock:
> > @@ -411,7 +411,7 @@ static int power_allocator_bind(struct
> > thermal_zone_device *tz) {
> > int ret;
> > struct power_allocator_params *params;
> > - unsigned long switch_on_temp, control_temp;
> > + int switch_on_temp, control_temp;
> > u32 temperature_threshold;
> >
> > if (!tz->tzp || !tz->tzp->sustainable_power) { @@ -476,7 +476,7 @@
> > static void power_allocator_unbind(struct thermal_zone_device *tz)
> > static int power_allocator_throttle(struct thermal_zone_device *tz,
> > int trip) {
> > int ret;
> > - unsigned long switch_on_temp, control_temp, current_temp;
> > + int switch_on_temp, control_temp, current_temp;
> > struct power_allocator_params *params = tz->governor_data;
> >
> > /*
>
> [...]
>
> > diff --git a/include/trace/events/thermal_power_allocator.h
> > b/include/trace/events/thermal_power_allocator.h
> > index 12e1321..5afae8f 100644
> > --- a/include/trace/events/thermal_power_allocator.h
> > +++ b/include/trace/events/thermal_power_allocator.h
> > @@ -11,7 +11,7 @@ TRACE_EVENT(thermal_power_allocator,
> > u32 total_req_power, u32 *granted_power,
> > u32 total_granted_power, size_t num_actors,
> > u32 power_range, u32 max_allocatable_power,
> > - unsigned long current_temp, s32 delta_temp),
> > + int current_temp, s32 delta_temp),
> > TP_ARGS(tz, req_power, total_req_power, granted_power,
> > total_granted_power, num_actors, power_range,
> > max_allocatable_power, current_temp, delta_temp), @@ -
> 24,7 +24,7 @@
> > TRACE_EVENT(thermal_power_allocator,
> > __field(size_t, num_actors )
> > __field(u32, power_range )
> > __field(u32, max_allocatable_power )
> > - __field(unsigned long, current_temp )
> > + __field(int, current_temp )
> > __field(s32, delta_temp )
> > ),
> > TP_fast_assign(
> > @@ -42,7 +42,7 @@ TRACE_EVENT(thermal_power_allocator,
> > __entry->delta_temp = delta_temp;
> > ),
> >
> > - TP_printk("thermal_zone_id=%d req_power={%s}
> total_req_power=%u granted_power={%s} total_granted_power=%u
> power_range=%u max_allocatable_power=%u current_temperature=%lu
> delta_temperature=%d",
> > + TP_printk("thermal_zone_id=%d req_power={%s}
> total_req_power=%u
> > +granted_power={%s} total_granted_power=%u power_range=%u
> > +max_allocatable_power=%u current_temperature=%d
> > +delta_temperature=%d",
> > __entry->tz_id,
> > __print_array(__get_dynamic_array(req_power),
> > __entry->num_actors, 4),
More information about the linux-arm-kernel
mailing list