[PATCH 13/23] ARM: at91/dt: sama5d3: use slow clock where necessary

[Alexandre Belloni]

The watchdog, the reset controller, the RTC, the shutdown controller, the
timer counters and the LCD PWM need the slow clock, add it where necessary.

[boris.brezillon at free-electrons.com: add tcb clocks]
Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
---
 arch/arm/boot/dts/sama5d3.dtsi      | 8 ++++++--
 arch/arm/boot/dts/sama5d3_tcb1.dtsi | 4 ++--
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 9e2444b07bce..db667f773ebe 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -145,8 +145,8 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf0010000 0x100>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			i2c0: i2c at f0014000 {
@@ -1261,11 +1261,13 @@
 			rstc at fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			shutdown-controller at fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer at fffffe30 {
@@ -1279,6 +1281,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffe40 0x10>;
 				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -1315,6 +1318,7 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffeb0 0x30>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index f7fa58fe09f1..801f9745e82f 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -31,8 +31,8 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8014000 0x100>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb1_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb1_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 		};
 	};
-- 
2.1.4