September 2012 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Sep 1 01:53:26 EDT 2012
Ending: Sun Sep 30 23:50:45 EDT 2012
Messages: 6262

• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Arnaud Patard (Rtp)
• [PATCH v7 1/7] drivers: usb: phy: add a new driver for omap usb2 phy   ABRAHAM, KISHON VIJAY
• [PATCH] arm: omap: hwmod: make *phy_48m* as the main_clk of ocp2scp   ABRAHAM, KISHON VIJAY
• [RFC PATCH 2/5] arm: omap: remove ocp2scp_usb_phy_ick clock node   ABRAHAM, KISHON VIJAY
• [PATCH v2 0/3] arm/dts: omap: add dt data for MUSB   ABRAHAM, KISHON VIJAY
• [PATCH] arm/dts: omap: Add omap-usb2 dt data   ABRAHAM, KISHON VIJAY
• [PATCH 1/3] arm: omap: hwmod: add a new addr space in otg for writing to control module   ABRAHAM, KISHON VIJAY
• [PATCH v2 0/3] arm/dts: omap: add dt data for MUSB   ABRAHAM, KISHON VIJAY
• [PATCH v2 1/3] arm/dts: Add twl6030-usb data   ABRAHAM, KISHON VIJAY
• [PATCH v2 2/3] arm/dts: Add twl4030-usb data   ABRAHAM, KISHON VIJAY
• [PATCH v2 3/3] usb: musb: omap: Add device tree support for omap musb glue   ABRAHAM, KISHON VIJAY
• [PATCH v2] arm: omap: hwmod: make *phy_48m* as the main_clk of ocp2scp   ABRAHAM, KISHON VIJAY
• [PATCH 1/4] usb: phy: add a new driver for usb3 phy   ABRAHAM, KISHON VIJAY
• [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   ABRAHAM, KISHON VIJAY
• [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   ABRAHAM, KISHON VIJAY
• [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy   ABRAHAM, KISHON VIJAY
• [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   ABRAHAM, KISHON VIJAY
• [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5   ABRAHAM, KISHON VIJAY
• [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5   ABRAHAM, KISHON VIJAY
• [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy   ABRAHAM, KISHON VIJAY
• [PATCH v2 1/2] usb: phy: add a new driver for usb3 phy   ABRAHAM, KISHON VIJAY
• [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy   ABRAHAM, KISHON VIJAY
• [PATCH 1/6] usb: dwc3-omap: use of_platform API to create dwc3 core pdev   ABRAHAM, KISHON VIJAY
• [PATCH 2/6] usb: dwc3-omap: use runtime API's to enable clocks   ABRAHAM, KISHON VIJAY
• [PATCH 4/6] usb: dwc3-omap: Add an API to write to dwc mailbox   ABRAHAM, KISHON VIJAY
• [PATCH 6/6] usb: dwc3: core: add dt support for dwc3 core   ABRAHAM, KISHON VIJAY
• [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy   ABRAHAM, KISHON VIJAY
• [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Thomas Abraham
• [PATCH 0/3] ARM: dts: Exynos4 dts reorganization   Thomas Abraham
• [PATCH v2 2/5] ARM: Exynos4: dts: Specify address and size cells for i2c controllers   Thomas Abraham
• [PATCH v2 3/5] ARM: Exynos4: Add OF compatibility lookups for Exynos4 i2c adapters   Thomas Abraham
• [PATCH v2 5/5] ARM: Exynos: Add basic dts file for Samsung Trats board   Thomas Abraham
• [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Thomas Abraham
• [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Thomas Abraham
• [PATCH 0/2] i2c: s3c2410: allow pin pin configuration using pinctrl   Thomas Abraham
• [PATCH 1/2] i2c: s3c2410: add optional pin configuration using pinctrl interface   Thomas Abraham
• [PATCH 2/2] ARM: dts: exynos4: allow i2c0 bus to be configured using pinctrl interface   Thomas Abraham
• [PATCH 1/2] i2c: s3c2410: add optional pin configuration using pinctrl interface   Thomas Abraham
• [PATCH 2/2] ARM: dts: exynos4: allow i2c0 bus to be configured using pinctrl interface   Thomas Abraham
• [PATCH v4 3/3] ARM: dts: Add nodes for dw_mmc controllers for Samsung Exynos5250 platforms   Thomas Abraham
• [PATCH 1/3] ARM: EXYNOS: pm_domain: Detect domain state on registration from DT   Thomas Abraham
• [PATCH 2/3] ARM: EXYNOS: pm_domain: Fix power domain name initialization   Thomas Abraham
• [PATCH 3/3] ARM: EXYNOS: pm_domain: Bind devices to power domains using DT   Thomas Abraham
• [PATCH 1/2] i2c: s3c2410: add optional pin configuration using pinctrl interface   Thomas Abraham
• [PATCH 1/2] i2c: s3c2410: add optional pin configuration using pinctrl interface   Thomas Abraham
• [PATCH 1/2] ARM: Exynos4: Put PCM, Slimbus, Spdif clocks to off state   Thomas Abraham
• [PATCH 2/2] ARM: SAMSUNG: Add check for NULL in clock interface   Thomas Abraham
• [PATCH] ARM: dts: use uart2 for console on smdkv310 and smdk5250   Thomas Abraham
• [PATCH] ARM: dts: use uart2 for console on smdkv310 and smdk5250   Thomas Abraham
• [PATCH v4 1/7] mfd: add syscon driver based on regmap   Dong Aisheng
• [PATCH v4 7/7] mfd: anatop-mfd: remove anatop driver   Dong Aisheng
• [PATCH v4 2/7] ARM: imx6q: add iomuxc gpr support into syscon   Dong Aisheng
• [PATCH v4 1/7] mfd: add syscon driver based on regmap   Dong Aisheng
• [PATCH v5 0/4] add syscon driver based on regmap for general registers access   Dong Aisheng
• [PATCH v5 1/4] mfd: add syscon driver based on regmap   Dong Aisheng
• [PATCH v5 2/4] ARM: imx6q: add iomuxc gpr support into syscon   Dong Aisheng
• [PATCH v5 3/4] regulator: anatop-regulator: convert to use syscon to access anatop register   Dong Aisheng
• [PATCH v5 4/4] mfd: anatop-mfd: remove anatop driver   Dong Aisheng
• [PATCH v5 3/4] regulator: anatop-regulator: convert to use syscon to access anatop register   Dong Aisheng
• [PATCH v5 1/4] mfd: add syscon driver based on regmap   Dong Aisheng
• [PATCH v6 0/4] add syscon driver based on regmap for general registers access   Dong Aisheng
• [PATCH v6 1/4] mfd: add syscon driver based on regmap   Dong Aisheng
• [PATCH v6 2/4] ARM: imx6q: add iomuxc gpr support into syscon   Dong Aisheng
• [PATCH v6 3/4] regulator: anatop-regulator: convert to use syscon to access anatop register   Dong Aisheng
• [PATCH v6 4/4] mfd: anatop-mfd: remove anatop driver   Dong Aisheng
• [PATCH v6 0/4] add syscon driver based on regmap for general registers access   Dong Aisheng
• [PATCH v6 0/4] add syscon driver based on regmap for general registers access   Dong Aisheng
• [PATCH V4 0/2] video: drm: Add Device tree support to DRM-FIMD   Leela Krishna Amudala
• [PATCH V4 1/2] drm/exynos: add platform_device_id table and driver data for drm fimd   Leela Krishna Amudala
• [PATCH V4 2/2] video: drm: exynos: Add device tree support   Leela Krishna Amudala
• [PATCH V4 2/2] video: drm: exynos: Add device tree support   Leela Krishna Amudala
• [PATCH V5 0/2] video: drm: Add Device tree support to DRM-FIMD   Leela Krishna Amudala
• [PATCH V5 1/2] drm/exynos: add platform_device_id table and driver data for drm fimd   Leela Krishna Amudala
• [PATCH V5 2/2] video: drm: exynos: Add device tree support   Leela Krishna Amudala
• [PATCH] ARM: EXYNOS5: Add bus clock and set parent clock for FIMD   Leela Krishna Amudala
• [PATCH] ARM: EXYNOS5: Add bus clock and set parent clock for FIMD   Leela Krishna Amudala
• [PATCH] ARM: EXYNOS5: Add bus clock and set parent clock for FIMD   Leela Krishna Amudala
• [PATCH V2] ARM: EXYNOS5: Add bus clock and set parent clock for FIMD   Leela Krishna Amudala
• [PATCH V2] ARM: EXYNOS5: Add bus clock and set parent clock for FIMD   Leela Krishna Amudala
• [PATCH V3] ARM: EXYNOS5: Add bus clock and set parent clock for FIMD   Leela Krishna Amudala
• [PATCH V4] ARM: EXYNOS5: Add bus clock and set parent clock for FIMD   Leela Krishna Amudala
• [PATCH V5] ARM: EXYNOS5: Add bus clock for FIMD   Leela Krishna Amudala
• [PATCH 0/3] Add device tree based discovery support for drm-fimd   Leela Krishna Amudala
• [PATCH 1/3] ARM: EXYNOS5: Add fimd node to the exynos5250 dtsi file   Leela Krishna Amudala
• [PATCH 2/3] ARM: EXYNOS: add device tree based discovery support for FIMD   Leela Krishna Amudala
• [PATCH 3/3] ARM: EXYNOS: Add drm-device node to the dtsi file   Leela Krishna Amudala
• [PATCH 2/3] ARM: EXYNOS: add device tree based discovery support for FIMD   Leela Krishna Amudala
• [PATCH 1/3] ARM: EXYNOS5: Add fimd node to the exynos5250 dtsi file   Leela Krishna Amudala
• [PATCH V4 2/2] video: drm: exynos: Add device tree support   Leela Krishna Amudala
• [PATCH V6 0/2] video: drm: Add Device tree support to exynos DRM-FIMD   Leela Krishna Amudala
• [PATCH V6 1/2] drm/exynos: add platform_device_id table and driver data for drm fimd   Leela Krishna Amudala
• [PATCH V6 2/2] video: drm: exynos: Add device tree support   Leela Krishna Amudala
• [PATCH V2 0/3] Add device tree based discovery support for drm-fimd   Leela Krishna Amudala
• [PATCH V2 1/3] ARM: EXYNOS5: Add fimd node to the exynos5250 dtsi file   Leela Krishna Amudala
• [PATCH V2 2/3] ARM: EXYNOS: add device tree based discovery support for FIMD   Leela Krishna Amudala
• [PATCH V2 3/3] ARM: EXYNOS: Add drm-device node to the dtsi file   Leela Krishna Amudala
• [PATCH] ARM: EXYNOS: no duplicate mask/unmask in eint0_15   Doug Anderson
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Domenico Andreoli
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Domenico Andreoli
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Domenico Andreoli
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Domenico Andreoli
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Domenico Andreoli
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Domenico Andreoli
• [PATCH V3 1/5] ARM: add infra-structure for BCM2708/BCM2835 and Raspberry Pi   Domenico Andreoli
• [PATCH] pinctrl: document semantics vs GPIO   Domenico Andreoli
• [PATCH] pinctrl: document semantics vs GPIO   Domenico Andreoli
• [PATCH v2] pinctrl: document semantics vs GPIO   Domenico Andreoli
• [PATCH] ARM: Add config option DEBUG_DECOMPRESS_KERNEL   Domenico Andreoli
• [PATCH V6] ARM: bcm2835: add stub clock driver   Domenico Andreoli
• [RFC PATCH 0/3] ARM: uncompress.h multi-platform enablement   Domenico Andreoli
• [PATCH V6] ARM: bcm2835: add stub clock driver   Domenico Andreoli
• [RFC PATCH 1/3] ARM: move ICEDCC uncompress.h to common location   Domenico Andreoli
• Kernel panic - not syncing: No init found   Ellis Andrew
• Kernel fails to boot with "crc error -- System halted"   Ellis Andrew
• Kernel panic - not syncing: No init found   Ellis Andrew
• Problems with frame buffer driver with MCS8144   Ellis Andrew
• [PATCH RESEND v4 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   AnilKumar, Chimata
• [PATCH 5/5] of: Modify c_can binding documentation   AnilKumar, Chimata
• [PATCH RESEND v4 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   AnilKumar, Chimata
• [PATCH 5/5] of: Modify c_can binding documentation   AnilKumar, Chimata
• [PATCH RESEND v4 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   AnilKumar, Chimata
• [PATCH] ARM: OMAP2+: select PINCTRL in Kconfig   AnilKumar, Chimata
• [PATCH 4/4] can: c_can: Add d_can suspend resume support   AnilKumar, Chimata
• [PATCH 2/4] can: c_can: Add d_can raminit support   AnilKumar, Chimata
• [PATCH 1/4] can: c_can: Adopt pinctrl support   AnilKumar, Chimata
• [PATCH 3/4] ARM: AM33XX: board-generic: Add of_dev_auxdata to pass d_can raminit   AnilKumar, Chimata
• [PATCH 1/4] can: c_can: Adopt pinctrl support   AnilKumar, Chimata
• [PATCH v3 3/3] cpufreq: Add a generic cpufreq-cpu0 driver   AnilKumar, Chimata
• [PATCH v2 0/4] can: c_can: Add suspend/resume and pinctrl support   AnilKumar, Chimata
• [PATCH v5 1/5] arm/dts: AM33XX: Add basic pinctrl device tree data   AnilKumar, Chimata
• [PATCH RESEND v5 3/3] arm/dts: AM33XX: Add D_CAN device tree data   AnilKumar, Chimata
• [PATCH v6 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   AnilKumar, Chimata
• [PATCH 5/5] omap-serial: Request pins using pinctrl framework   AnilKumar, Chimata
• [PATCH v7 0/3] arm/dts: Add device tree data for AM33XX devices   AnilKumar, Chimata
• [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   AnilKumar, Chimata
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   AnilKumar, Chimata
• [PATCH v2 4/4] can: c_can: Add d_can suspend resume support   AnilKumar, Chimata
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   AnilKumar, Chimata
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   AnilKumar, Chimata
• [PATCH v3 4/4] arm/dts: Add tps65217 regulator DT data to am335x-bone.dts   AnilKumar, Chimata
• [PATCH 4/4] can: c_can: Add d_can suspend resume support   AnilKumar, Chimata
• [PATCH 2/2] arm/dts: AM33XX: Add device tree OPP table   AnilKumar, Chimata
• [PATCH 4/4] can: c_can: Add d_can suspend resume support   AnilKumar, Chimata
• [PATCH 2/2] ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evm   AnilKumar, Chimata
• [PATCH 2/2] ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evm   AnilKumar, Chimata
• [PATCH v3 4/4] ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evm   AnilKumar, Chimata
• [PATCH RESEND 3/5] ARM: OMAP2+: AM33XX: Add clock entries to omap_clk data   AnilKumar, Chimata
• [PATCH RESEND 0/5] ARM: dts: AM33XX: Add device tree data   AnilKumar, Chimata
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Simon Arlott
• [PATCH V2] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Simon Arlott
• [PATCH v6 0/3] Updated Cortex-M3 series   Jonathan Austin
• [PATCH v3 09/31] arm64: Cache maintenance routines   Simon Baatz
• [PATCH v3 09/31] arm64: Cache maintenance routines   Simon Baatz
• [PATCH v3 09/31] arm64: Cache maintenance routines   Simon Baatz
• [PATCH 0/2] fix and improvement of flush(_kernel)_dcache_page()   Simon Baatz
• [PATCH V2 1/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
• [PATCH 2/2] ARM: remove unnecessary flush of anon pages in flush(_kernel)_dcache_page()   Simon Baatz
• [PATCH 2/2] ARM: remove unnecessary flush of anon pages in flush(_kernel)_dcache_page()   Simon Baatz
• [PATCH] ARM: exynos: mct: cache mct upper count   Mandeep Singh Baines
• [PATCH] ARM: exynos: mct: cache mct upper count   Mandeep Singh Baines
• [PATCH v3 00/23] OMAP UART patches   Felipe Balbi
• [PATCH v2] usb: move phy driver from mach-tegra to drivers/usb   Felipe Balbi
• [PATCH v3 03/23] serial: omap: don't access the platform_device   Felipe Balbi
• [PATCH v3 20/23] serial: omap: fix software flow control   Felipe Balbi
• [PATCH v4 00/21] OMAP UART Patches   Felipe Balbi
• [PATCH v4 01/21] serial: omap: don't access the platform_device   Felipe Balbi
• [PATCH v4 02/21] serial: omap: drop DMA support   Felipe Balbi
• [PATCH v4 03/21] serial: add OMAP-specific defines   Felipe Balbi
• [PATCH v4 04/21] serial: omap: simplify IRQ handling   Felipe Balbi
• [PATCH v4 05/21] serial: omap: refactor receive_chars() into rdi/rlsi handlers   Felipe Balbi
• [PATCH v4 06/21] serial: omap: move THRE check to transmit_chars()   Felipe Balbi
• [PATCH v4 07/21] serial: omap: stick to put_autosuspend   Felipe Balbi
• [PATCH v4 08/21] serial: omap: set dev->drvdata before enabling pm_runtime   Felipe Balbi
• [PATCH v4 09/21] serial: omap: drop unnecessary check from remove   Felipe Balbi
• [PATCH v4 10/21] serial: omap: make sure to suspend device before remove   Felipe Balbi
• [PATCH v4 11/21] serial: omap: don't save IRQ flags on hardirq   Felipe Balbi
• [PATCH v4 12/21] serial: omap: fix sequence of pm_runtime_* calls.   Felipe Balbi
• [PATCH v4 13/21] serial: omap: optimization with section annotations   Felipe Balbi
• [PATCH v4 14/21] serial: omap: drop "inline" from IRQ handler prototype   Felipe Balbi
• [PATCH v4 15/21] serial: omap: unlock the port lock   Felipe Balbi
• [PATCH v4 16/21] serial: omap: implement set_wake   Felipe Balbi
• [PATCH v4 17/21] serial: omap: make sure to put() on poll_get_char   Felipe Balbi
• [PATCH v4 18/21] serial: omap: fix software flow control   Felipe Balbi
• [PATCH v4 19/21] serial: omap: remove unnecessary header and add a missing one   Felipe Balbi
• [PATCH v4 20/21] serial: omap: move uart_omap_port definition to C file   Felipe Balbi
• [PATCH v4 21/21] serial: omap: enable RX and TX FIFO usage   Felipe Balbi
• [PATCH v7 1/7] drivers: usb: phy: add a new driver for omap usb2 phy   Felipe Balbi
• [PATCH 0/4] arm/dts: omap: add dt data for MUSB   Felipe Balbi
• [PATCH 1/3] arm: omap: hwmod: add a new addr space in otg for writing to control module   Felipe Balbi
• [PATCH 1/3] arm: omap: hwmod: add a new addr space in otg for writing to control module   Felipe Balbi
• [PATCH v4 00/21] OMAP UART Patches   Felipe Balbi
• [PATCH] arm: omap: hwmod: make *phy_48m* as the main_clk of ocp2scp   Felipe Balbi
• [PATCH 5/5] omap-serial: Request pins using pinctrl framework   Felipe Balbi
• [PATCH] serial: omap: fix compile breakage   Felipe Balbi
• [PATCH v2] serial: omap: fix compile breakage   Felipe Balbi
• [PATCH 5/5] omap-serial: Request pins using pinctrl framework   Felipe Balbi
• [PATCH v4 00/21] OMAP UART Patches   Felipe Balbi
• [PATCH] serial: omap: fix compile breakage   Felipe Balbi
• [PATCH] ARM: dts: OMAP4: Add reg and interrupts for every nodes   Felipe Balbi
• [PATCH] ARM: dts: OMAP4: Add reg and interrupts for every nodes   Felipe Balbi
• [PATCH] serial: omap: fix DeviceTree boot   Felipe Balbi
• [PATCH v4 00/21] OMAP UART Patches   Felipe Balbi
• OMAP baseline test results for v3.6-rc5   Felipe Balbi
• [PATCH 1/3] arm: omap: hwmod: add a new addr space in otg for writing to control module   Felipe Balbi
• [PATCH 1/3] arm: omap: hwmod: add a new addr space in otg for writing to control module   Felipe Balbi
• [PATCH 05/17] ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end   Felipe Balbi
• [PATCH 07/17] Input: omap-keypad: Remove dependencies to mach includes   Felipe Balbi
• [PATCH 12/17] ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQ   Felipe Balbi
• [PATCH v2 06/11] USB: mxs-phy: add basic otg support   Felipe Balbi
• [PATCH v4 00/21] OMAP UART Patches   Felipe Balbi
• [PATCHv7 00/23]I2C big cleanup   Felipe Balbi
• [PATCH 02/16] ARM: davinci: move platform_data definitions   Felipe Balbi
• [PATCH 12/16] ARM: nomadik: move platform_data definitions   Felipe Balbi
• [PATCH 15/16] ARM: samsung: move platform_data definitions   Felipe Balbi
• [PATCH 07/17] Input: omap-keypad: Remove dependencies to mach includes   Felipe Balbi
• [PATCH v4 00/21] OMAP UART Patches   Felipe Balbi
• [PATCH] ARM: shmobile: r8a7779: remove USB phy initializer   Felipe Balbi
• [PATCH v4 00/21] OMAP UART Patches   Felipe Balbi
• [PATCHv8 00/23]I2C big cleanup   Felipe Balbi
• [PATCHv8 00/23]I2C big cleanup   Felipe Balbi
• [PATCHv8 00/23]I2C big cleanup   Felipe Balbi
• [PATCH v4 00/21] OMAP UART Patches   Felipe Balbi
• [PATCH] mfd: Fix compile for twl-core.c by removing cpu_is_omap usage   Felipe Balbi
• [PATCH 7/8] ARM: OMAP: convert I2C driver to PM QoS for latency constraints   Felipe Balbi
• [PATCH] serial: omap: Remove unnecessary checks from suspend/resume   Felipe Balbi
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Felipe Balbi
• [PATCH 2/4] usb: dwc3: Fix gadget pullup in SS mode   Felipe Balbi
• [PATCH 3/4] usb: phy: omap-usb3: Decrease the number of transitions to recovery   Felipe Balbi
• [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5   Felipe Balbi
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Felipe Balbi
• [PATCH v2 RESEND] USB: chipidea: convert to use devm_request_irq   Felipe Balbi
• [PATCH 17/24] ARM: OMAP: use __iomem pointers for MMIO   Felipe Balbi
• [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5   Felipe Balbi
• [PATCH 2/4] usb: dwc3: Fix gadget pullup in SS mode   Felipe Balbi
• [PATCH 2/4] usb: dwc3: Fix gadget pullup in SS mode   Felipe Balbi
• [PATCH 2/4] usb: dwc3: Fix gadget pullup in SS mode   Felipe Balbi
• [PATCH 03/29] ARM: OMAP1: Make plat/mux.h omap1 only   Felipe Balbi
• [RFC 2/3] ARM: move udc_pxa2xx.h to linux/platform_data   Felipe Balbi
• [PATCH] serial: omap: fix the overrun case   Felipe Balbi
• [PATCH] serial: omap: fix the overrun case   Felipe Balbi
• [PATCH] serial: omap: fix the overrun case   Felipe Balbi
• [PATCH v2] serial: omap: fix the reciever line error case   Felipe Balbi
• [RFC PATCH 08/13] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC   Felipe Balbi
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Felipe Balbi
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Felipe Balbi
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Felipe Balbi
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Felipe Balbi
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Felipe Balbi
• [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5   Felipe Balbi
• [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5   Felipe Balbi
• [PATCH] arm: omap: move OMAP USB platform data to <linux/platform_data/omap-usb.h>   Felipe Balbi
• [PATCH 1/6] usb: dwc3-omap: use of_platform API to create dwc3 core pdev   Felipe Balbi
• [PATCH 2/6] usb: dwc3-omap: use runtime API's to enable clocks   Felipe Balbi
• [PATCH 4/6] usb: dwc3-omap: Add an API to write to dwc mailbox   Felipe Balbi
• [PATCH 6/6] usb: dwc3: core: add dt support for dwc3 core   Felipe Balbi
• [PATCH 09/16] ARM: tegra: move platform_data definitions   Chris Ball
• [PATCH 09/16] ARM: tegra: move platform_data definitions   Chris Ball
• [PATCH 29/34] mmc: mxcmmc: remove mach/hardware.h inclusion   Chris Ball
• [PATCH v2 2/3] mmc: davinci_mmc: convert to DMA engine API   Chris Ball
• [PATCH] mmc: mxs-mmc: implement broken-cd   Chris Ball
• [PATCH v2 1/2] mmc: atmel-mci: DMA can be used with other controller   Chris Ball
• [PATCH v2 2/2] mmc: atmel-mci: AP700x PDC is not connected to MCI   Chris Ball
• [PATCH v2 1/5] mmc: host: sdhci-s3c: Add broken-voltage DT property for broken voltage quirk   Chris Ball
• [PATCH 2/5] mmc: msm_sdcc: Remove unnecessary include   Chris Ball
• [PATCH v2 1/5] mmc: host: sdhci-s3c: Add broken-voltage DT property for broken voltage quirk   Chris Ball
• [PATCH v2 1/5] mmc: host: sdhci-s3c: Add broken-voltage DT property for broken voltage quirk   Chris Ball
• [PATCH v2 1/5] mmc: host: sdhci-s3c: Add broken-voltage DT property for broken voltage quirk   Chris Ball
• [PATCH 3/3] mmc: esdhc i.MX: Support 8bit mode   Chris Ball
• [PATCH 3/3] mmc: esdhc i.MX: Support 8bit mode   Chris Ball
• [PATCH RESEND 3/4] ARM: AM33XX: board-generic: Add of_dev_auxdata to pass d_can raminit   Bedia, Vaibhav
• [PATCH] ARM: SAMSUNG: Use spin_lock_{irqsave, irqrestore} in clk_set_rate   Tushar Behera
• [PATCH] ARM: SAMSUNG: Use spin_lock_{irqsave, irqrestore} in clk_set_rate   Tushar Behera
• [PATCH v2] ASoC: Samsung: Update Kconfig for Exynos5250 and Exynos4412   Tushar Behera
• [Query] Does u-boot processes dtb file   Dirk Behme
• [Query] Does u-boot processes dtb file   Dirk Behme
• [PATCH 3/6] staging: drm/imx: add i.MX IPUv3 base driver   Dirk Behme
• [PATCH] spi/imx: set the inactive state of the clock according to the clock polarity   Dirk Behme
• [PATCH] spi/imx: set the inactive state of the clock according to the clock polarity   Dirk Behme
• [PATCH] spi/imx: set the inactive state of the clock according to the clock polarity   Dirk Behme
• [PATCH] spi/imx: set the inactive state of the clock according to the clock polarity   Dirk Behme
• [PATCH v2] spi/imx: set the inactive state of the clock according to the clock polarity   Dirk Behme
• [PATCH 1/1] mxc_nand : allow swapping the Bad block Indicator for NFC v1.   Juergen Beisert
• [PATCH 1/1] mxc_nand : allow swapping the Bad block Indicator for NFC v1.   Juergen Beisert
• [PATCH] omap: remoteproc: set bootaddr support   Ohad Ben-Cohen
• [PATCH] rpmsg: use right device paramter when calling dma_free_coherent function   Ohad Ben-Cohen
• [GIT PULL] hwspinlock: a single fix for 3.6   Ohad Ben-Cohen
• [GIT PULL] rpmsg: a fix for 3.6   Ohad Ben-Cohen
• [PATCHv2 0/3] remoteproc: introduce rproc recovery   Ohad Ben-Cohen
• [PATCH 3/6] ARM: plat-versatile: add DT support to FPGA IRQ controller   Arnd Bergmann
• [PATCH 1/3] ARM: move debug macros to common location   Arnd Bergmann
• [PATCH 2/6 v2] ARM: integrator: check PL010 device name rather than base address   Arnd Bergmann
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Arnd Bergmann
• [PATCH 2/2] ARM: allow for ATAGS to be configured out when DT support is selected   Arnd Bergmann
• [PATCH 4/4] ARM: ks8695: convert to generic time and clocksource   Arnd Bergmann
• [PATCH 4/4] ARM: ks8695: convert to generic time and clocksource   Arnd Bergmann
• [PATCH v2 17/31] arm64: System calls handling   Arnd Bergmann
• [PATCH v2] hvc_dcc : add support to armv4 and armv5 core   Arnd Bergmann
• [PATCH 1/4] ARM: ks-8695: merge the timer header into the timer driver   Arnd Bergmann
• [PATCH 2/4] ARM: ks8695: use [readl|writel]_relaxed()   Arnd Bergmann
• [PATCH 4/4] ARM: ks8695: convert to generic time and clocksource   Arnd Bergmann
• [RFC/PATCH] ARM: PRIMA2: initial support for SiRFmarco dual-core SoC   Arnd Bergmann
• [PATCH v2] ARM: initial multiplatform support   Arnd Bergmann
• [PATCH 2/6 v3] ARM: integrator: check PL010 base address from resource   Arnd Bergmann
• [PATCH 02/11] misc: Versatile Express config bus infrastructure   Arnd Bergmann
• [PATCH 04/11] misc: Versatile Express display muxer driver   Arnd Bergmann
• [PATCH 06/11] clk: Common clocks implementation for Versatile Express   Arnd Bergmann
• [PATCH 05/11] ARM: shmobile: r8a7779: add USB common phy initializer   Arnd Bergmann
• [PATCH v2] ARM: initial multiplatform support   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the arm-current tree   Arnd Bergmann
• [PATCH 02/11] misc: Versatile Express config bus infrastructure   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the arm-current tree   Arnd Bergmann
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Arnd Bergmann
• [PATCH 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Arnd Bergmann
• [RFC/PATCH] ARM: PRIMA2: initial support for SiRFmarco dual-core SoC   Arnd Bergmann
• [PATCH v2] ARM: initial multiplatform support   Arnd Bergmann
• [PATCH 02/17] arm: ux500: add ccu9540 board support   Arnd Bergmann
• [PATCH 14/17] mfd: db8500-prcmu: use db8500 legacy services   Arnd Bergmann
• [PATCH 15/17] mfd: dbx540-prcmu creation   Arnd Bergmann
• [PATCH 02/17] arm: ux500: add ccu9540 board support   Arnd Bergmann
• [st-ericsson] [PATCH 15/17] mfd: dbx540-prcmu creation   Arnd Bergmann
• [PATCH v2] ARM: initial multiplatform support   Arnd Bergmann
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Arnd Bergmann
• [PATCH v7 1/7] drivers: usb: phy: add a new driver for omap usb2 phy   Arnd Bergmann
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Arnd Bergmann
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Arnd Bergmann
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Arnd Bergmann
• [PATCH] ARM: ks8695: add board support for the OpenGear boards based on the KS8695   Arnd Bergmann
• [PATCH] ARM: ixp4xx: move fixed mapping of internal devices into vmalloc region   Arnd Bergmann
• [PATCH 04/19] ARM: ux500: Add SDI (MMC) support to the HREF Device Tree   Arnd Bergmann
• [PATCH 05/19] ARM: ux500: Stop registering HREF's SDI devices from platform data   Arnd Bergmann
• [PATCH 15/19] mfd: Don't convert just one IRQ using irqdomain if a range is provided   Arnd Bergmann
• [PATCH 00/19] First HREF Device Tree enablement patch-set   Arnd Bergmann
• [PATCH] ARM: ixp4xx: move fixed mapping of internal devices into vmalloc region   Arnd Bergmann
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Arnd Bergmann
• [PATCH 15/19] mfd: Don't convert just one IRQ using irqdomain if a range is provided   Arnd Bergmann
• [PATCH 15/19] mfd: Don't convert just one IRQ using irqdomain if a range is provided   Arnd Bergmann
• [PATCH 00/19] First HREF Device Tree enablement patch-set   Arnd Bergmann
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Arnd Bergmann
• [PATCH v3 03/31] arm64: Exception handling   Arnd Bergmann
• [PATCH v3 04/31] arm64: MMU definitions   Arnd Bergmann
• [PATCH v3 05/31] arm64: MMU initialisation   Arnd Bergmann
• [PATCH v3 06/31] arm64: MMU fault handling and page table management   Arnd Bergmann
• [PATCH v3 07/31] arm64: Process management   Arnd Bergmann
• [PATCH v3 08/31] arm64: CPU support   Arnd Bergmann
• [PATCH v3 09/31] arm64: Cache maintenance routines   Arnd Bergmann
• [PATCH v3 10/31] arm64: TLB maintenance functionality   Arnd Bergmann
• [PATCH v3 11/31] arm64: IRQ handling   Arnd Bergmann
• [PATCH v3 12/31] arm64: Atomic operations   Arnd Bergmann
• [PATCH v3 14/31] arm64: DMA mapping API   Arnd Bergmann
• [PATCH v3 15/31] arm64: SMP support   Arnd Bergmann
• [PATCH v3 16/31] arm64: ELF definitions   Arnd Bergmann
• [PATCH v3 17/31] arm64: System calls handling   Arnd Bergmann
• [PATCH v3 18/31] arm64: VDSO support   Arnd Bergmann
• [PATCH v3 20/31] arm64: User access library functions   Arnd Bergmann
• [PATCH v3 21/31] arm64: 32-bit (compat) applications support   Arnd Bergmann
• [PATCH v3 23/31] arm64: Debugging support   Arnd Bergmann
• [PATCH v3 26/31] arm64: Miscellaneous library functions   Arnd Bergmann
• [PATCH v3 27/31] arm64: Loadable modules   Arnd Bergmann
• [PATCH v3 28/31] arm64: Generic timers support   Arnd Bergmann
• [PATCH v3 29/31] arm64: Miscellaneous header files   Arnd Bergmann
• [PATCH v3 30/31] arm64: Build infrastructure   Arnd Bergmann
• [PATCH V2] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Arnd Bergmann
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Arnd Bergmann
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Arnd Bergmann
• [PATCH 00/19] First HREF Device Tree enablement patch-set   Arnd Bergmann
• [PATCH 00/19] First HREF Device Tree enablement patch-set   Arnd Bergmann
• [PATCH v3 17/31] arm64: System calls handling   Arnd Bergmann
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Arnd Bergmann
• mfd: Implement devicetree support for AB8500 Btemp   Arnd Bergmann
• [PATCH] mfd: Implement devicetree support for AB8500 fg   Arnd Bergmann
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
• [PATCH v3 17/31] arm64: System calls handling   Arnd Bergmann
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Arnd Bergmann
• mfd: Implement devicetree support for AB8500 Btemp   Arnd Bergmann
• [PATCH 00/16] ARM: big platform data header rename   Arnd Bergmann
• [PATCH 01/16] ARM: at91: move platform_data definitions   Arnd Bergmann
• [PATCH 02/16] ARM: davinci: move platform_data definitions   Arnd Bergmann
• [PATCH 03/16] ARM: ep93xx: move platform_data definitions   Arnd Bergmann
• [PATCH 04/16] ARM: imx: move platform_data definitions   Arnd Bergmann
• [PATCH 05/16] ARM: msm: move platform_data definitions   Arnd Bergmann
• [PATCH 06/16] ARM: netx: move platform_data definitions   Arnd Bergmann
• [PATCH 07/16] ARM: pxa: move platform_data definitions   Arnd Bergmann
• [PATCH 08/16] ARM: sa1100: move platform_data definitions   Arnd Bergmann
• [PATCH 09/16] ARM: tegra: move platform_data definitions   Arnd Bergmann
• [PATCH 10/16] ARM: vt8500: move platform_data definitions   Arnd Bergmann
• [PATCH 11/16] ARM: w90x900: move platform_data definitions   Arnd Bergmann
• [PATCH 12/16] ARM: nomadik: move platform_data definitions   Arnd Bergmann
• [PATCH 13/16] ARM: omap: move platform_data definitions   Arnd Bergmann
• [PATCH 13/16] ARM: omap: move platform_data definitions   Arnd Bergmann
• [PATCH 14/16] ARM: orion: move platform_data definitions   Arnd Bergmann
• [PATCH 15/16] ARM: samsung: move platform_data definitions   Arnd Bergmann
• [PATCH 16/16] ARM: spear: move platform_data definitions   Arnd Bergmann
• [PATCH v4] Add basic address decoding support for Marvell 370/XP   Arnd Bergmann
• [PATCH 12/16] ARM: nomadik: move platform_data definitions   Arnd Bergmann
• [PATCH 04/16] ARM: imx: move platform_data definitions   Arnd Bergmann
• [PATCH 13/16] ARM: omap: move platform_data definitions   Arnd Bergmann
• [PATCH 13/16] ARM: omap: move platform_data definitions   Arnd Bergmann
• [PATCH 09/16] ARM: tegra: move platform_data definitions   Arnd Bergmann
• [PATCH 03/16] ARM: ep93xx: move platform_data definitions   Arnd Bergmann
• [PATCH v4] Add basic address decoding support for Marvell 370/XP   Arnd Bergmann
• [PATCH V3 1/5] ARM: add infra-structure for BCM2708/BCM2835 and Raspberry Pi   Arnd Bergmann
• [PATCH V3 2/5] ARM: bcm2708: add interrupt controller driver   Arnd Bergmann
• [PATCH V3 3/5] ARM: bcm2708: add system timer   Arnd Bergmann
• [PATCH V3 5/5] ARM: bcm2708: instantiate console UART   Arnd Bergmann
• [PATCH V3 4/5] ARM: bcm2708: add stub clock driver   Arnd Bergmann
• [PATCH v3 00/31] AArch64 Linux kernel port   Arnd Bergmann
• [PATCH v9 00/13] Per sub-architecture SMP operations   Arnd Bergmann
• [PATCH v9 01/13] ARM: SoC: add per-platform SMP operations   Arnd Bergmann
• [PATCH v9 02/13] ARM: SoC: convert VExpress/RealView to SoC descriptor   Arnd Bergmann
• [PATCH v9 03/13] ARM: SoC: convert OMAP4 to SoC descriptor   Arnd Bergmann
• [PATCH v9 04/13] ARM: SoC: convert Tegra to SoC descriptor   Arnd Bergmann
• [PATCH v9 05/13] ARM: SoC: convert Exynos4 to SoC descriptor   Arnd Bergmann
• [PATCH v9 06/13] ARM: SoC: convert MSM SMP to SoC descriptor   Arnd Bergmann
• [PATCH v9 07/13] ARM: SoC: convert ux500 to SoC descriptor   Arnd Bergmann
• [PATCH v9 08/13] ARM: SoC: convert shmobile SMP to SoC descriptor   Arnd Bergmann
• [PATCH v9 09/13] ARM: SoC: convert highbank to SoC descriptor   Arnd Bergmann
• [PATCH v9 10/13] ARM: SoC: convert imx6q to SoC descriptor   Arnd Bergmann
• [PATCH v9 11/13] ARM: SoC: convert spear13xx to SoC descriptor   Arnd Bergmann
• [PATCH v9 12/13] ARM: smp: Make SoC descriptor mandatory for SMP platforms   Arnd Bergmann
• [PATCH v9 13/13] ARM: consolidate pen_release instead of having per platform definitions   Arnd Bergmann
• Implement devicetree support for AB8500 Btemp   Arnd Bergmann
• [PATCH 04/16] ARM: imx: move platform_data definitions   Arnd Bergmann
• [PATCH 09/16] ARM: tegra: move platform_data definitions   Arnd Bergmann
• [PATCH 12/16] ARM: nomadik: move platform_data definitions   Arnd Bergmann
• [PATCH 02/16] ARM: davinci: move platform_data definitions   Arnd Bergmann
• [PATCH 13/16] ARM: omap: move platform_data definitions   Arnd Bergmann
• [PATCH 13/16] ARM: omap: move platform_data definitions   Arnd Bergmann
• [PATCH 11/12] ARM: initial multiplatform support   Arnd Bergmann
• [PATCH v2 5/6] ARM: orion: move custom gpio functions to orion-gpio.h   Arnd Bergmann
• [PATCH v2 5/6] ARM: orion: move custom gpio functions to orion-gpio.h   Arnd Bergmann
• [PATCH 11/12] ARM: initial multiplatform support   Arnd Bergmann
• [PATCH v2 6/6] ARM: make mach/gpio.h headers optional   Arnd Bergmann
• [PATCH v9 10/13] ARM: SoC: convert imx6q to SoC descriptor   Arnd Bergmann
• [PATCH 1/2] ARM: SoC: convert MSM SMP to SoC descriptor   Arnd Bergmann
• [PATCH V3 5/5] ARM: bcm2708: instantiate console UART   Arnd Bergmann
• [PATCH V3 2/5] ARM: bcm2708: add interrupt controller driver   Arnd Bergmann
• [PATCH v3 26/31] arm64: Miscellaneous library functions   Arnd Bergmann
• [PATCH v3 21/31] arm64: 32-bit (compat) applications support   Arnd Bergmann
• [GIT PULL] ARM: LPC32xx: core update   Arnd Bergmann
• Implement devicetree support for AB8500 Btemp   Arnd Bergmann
• [PATCH V4 1/5] ARM: add infra-structure for BCM2835 and Raspberry Pi   Arnd Bergmann
• [PATCH V4 2/5] ARM: bcm2835: add interrupt controller driver   Arnd Bergmann
• [PATCH V4 5/5] ARM: bcm2835: instantiate console UART   Arnd Bergmann
• [PATCH 1/2] ARM: SoC: convert MSM SMP to SoC descriptor   Arnd Bergmann
• Implement devicetree support for AB8500 Btemp   Arnd Bergmann
• [PATCH 2/2] ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evm   Arnd Bergmann
• [PATCH 1/2] ep93xx: Fix type error warnings in ts72xx build   Arnd Bergmann
• [PATCH 2/2] ep93xx: Move ts72xx.h out of include/mach   Arnd Bergmann
• [PATCH V4 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH 2/2] ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evm   Arnd Bergmann
• [PATCH V4 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH V5 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH V5 2/2] dmaengine: add helper function to request a slave DMA channel   Arnd Bergmann
• [PATCH 2/2] ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evm   Arnd Bergmann
• [PATCH v2 0/4] lis3: lis3lv02d_i2c: Add device tree support   Arnd Bergmann
• [PATCH v2 13/31] arm64: Device specific operations   Arnd Bergmann
• [PATCH V4 1/5] ARM: add infra-structure for BCM2835 and Raspberry Pi   Arnd Bergmann
• [PATCH v2 0/4] lis3: lis3lv02d_i2c: Add device tree support   Arnd Bergmann
• [PATCH 00/24] ARM: readl/writel conversion fallout   Arnd Bergmann
• [PATCH 01/24] ARM: shmobile: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 02/24] ARM: at91: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 03/24] ARM: ebsa110: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 04/24] ARM: ep93xx: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 05/24] ARM: imx: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 06/24] ARM: integrator: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 07/24] ARM: iop13xx: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 08/24] ARM: iop32x: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 09/24] ARM: ixp4xx: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 10/24] ARM: ks8695: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 11/24] ARM: lpc32xx: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 12/24] ARM: msm: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 13/24] ARM: nomadik: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 14/24] ARM: prima2: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 15/24] ARM: sa1100: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 16/24] ARM: spear13xx: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 17/24] ARM: OMAP: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 18/24] ARM: samsung: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 19/24] sh: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 20/24] input: rpcmouse: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 21/24] serial: ks8695: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 22/24] scsi: eesox: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 23/24] video: da8xx-fb: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 24/24] net: seeq: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 04/24] ARM: ep93xx: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 22/24] scsi: eesox: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 22/24] scsi: eesox: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 05/24] ARM: imx: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH] ARM: imx: armadillo5x0: Fix illegal register access   Arnd Bergmann
• [PATCH 17/24] ARM: OMAP: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 33/34] ARM: imx: remove header file mach/irqs.h   Arnd Bergmann
• [PATCH 00/34] i.MX multi-platform support   Arnd Bergmann
• [PATCH 34/34] ARM: imx: enable multi-platform build   Arnd Bergmann
• [PATCH v3 0/4] lis3: lis3lv02d_i2c: Add device tree support   Arnd Bergmann
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Arnd Bergmann
• linux-next: build failure after merge of the final tree (arm-soc tree related)   Arnd Bergmann
• [PATCH 16/34] ASoC: imx-ssi: remove unneeded mach/hardware.h inclusion   Arnd Bergmann
• [PATCH v3] ARM: imx: armadillo5x0: Fix illegal register access   Arnd Bergmann
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] mfd: Fix compile for twl-core.c by removing cpu_is_omap usage   Arnd Bergmann
• [PATCH 19/24] sh: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 02/24] ARM: at91: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 22/24] scsi: eesox: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 24/24] net: seeq: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 01/24] ARM: shmobile: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 12/34] media: mx1_camera: remove the driver   Arnd Bergmann
• [PATCH] ARM: ux500: fix spi2 pin group   Arnd Bergmann
• [PATCH] ARM: ux500: tidy up pin sleep modes   Arnd Bergmann
• [PATCH v5 00/17] Introduce Xen support on ARM (based on 3.6-rc5)   Arnd Bergmann
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] spi/pl022: Devicetree support w/o platform data   Arnd Bergmann
• [PATCH v2] spi/pl022: Devicetree support w/o platform data   Arnd Bergmann
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Arnd Bergmann
• [PATCH v2 08/13] mfd: Versatile Express system registers driver   Arnd Bergmann
• [PATCH 01/24] ARM: shmobile: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 08+09/24] ARM: ixp4xx: use __iomem pointers for MMIO   Arnd Bergmann
• [RFC 0/5] ARM: dma-mapping: New dma_map_ops to control IOVA more precisely   Arnd Bergmann
• [PATCH 16/34] ASoC: imx-ssi: remove unneeded mach/hardware.h inclusion   Arnd Bergmann
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH v2 08/13] mfd: Versatile Express system registers driver   Arnd Bergmann
• [PATCH v2 07/13] misc: Versatile Express config infrastructure   Arnd Bergmann
• [PATCH 17/24] ARM: OMAP: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH 09/24] ARM: ixp4xx: use __iomem pointers for MMIO   Arnd Bergmann
• [GIT PULL V2 1/4] ARM: Kirkwood: DT bindings for v3.7   Arnd Bergmann
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH 13/16] ARM: omap: move platform_data definitions   Arnd Bergmann
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH 1/1] drivers: bus: Move the OMAP interconnect driver to drivers/bus/   Arnd Bergmann
• [PATCH v2] of: dma: fix typos in generic dma binding definition   Arnd Bergmann
• Adding new board to Kernel   Arnd Bergmann
• [PATCH 1/1] drivers: bus: Move the OMAP interconnect driver to drivers/bus/   Arnd Bergmann
• Adding new board to Kernel   Arnd Bergmann
• [PATCH v2 00/34] i.MX multi-platform support   Arnd Bergmann
• [PATCH v2 07/13] misc: Versatile Express config infrastructure   Arnd Bergmann
• [PATCH v4] gpio: mvebu: new gpio driver for mvebu platforms   Arnd Bergmann
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Arnd Bergmann
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Arnd Bergmann
• linux-next: manual merge of the ixp4xx tree with the arm-soc tree   Arnd Bergmann
• [PATCH v2 00/34] i.MX multi-platform support   Arnd Bergmann
• [RFC PATCH 10/13] spi: omap2-mcspi: dma_request_slave_channel() support for DT platforms   Arnd Bergmann
• [GIT PULL RESEND] arm-soc: vt8500: Convert mach-vt8500 to devicetree   Arnd Bergmann
• [PATCH V4 6/6] arm: l2x0: add aurora related properties to OF binding   Arnd Bergmann
• [PATCH V4 4/6] arm: mvebu: add L2 cache support   Arnd Bergmann
• [PATCH V4 5/6] arm: mvebu: add Aurora L2 Cache Controller to the DT   Arnd Bergmann
• [PATCH 01/11] ARM: defconfig: Remove CONFIG_MISC_DEVICES   Arnd Bergmann
• [GIT PULL] ARM initial multi-platform support   Arnd Bergmann
• [GIT PULL V3 1/5] ARM: Kirkwood: address decoding change for v3.7   Arnd Bergmann
• vt8500: multiplatform for 3.8   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Arnd Bergmann
• [PATCH v3 1/1] arm: introduce a DTS for Xen unprivileged virtual machines   Arnd Bergmann
• [PATCH v2] GPIO: Add support for GPIO on CLPS711X-target platform   Arnd Bergmann
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Arnd Bergmann
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Arnd Bergmann
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Arnd Bergmann
• [PATCH v2] hvc_dcc : add support to armv4 and armv5 core   Arnd Bergmann
• [PATCH] ARM: ux500: Fix initialisation order for UIBs   Arnd Bergmann
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Arnd Bergmann
• [RFC PATCH 0/3] ARM: uncompress.h multi-platform enablement   Arnd Bergmann
• [RFC PATCH 0/3] ARM: uncompress.h multi-platform enablement   Arnd Bergmann
• [RFC PATCH 0/3] ARM: uncompress.h multi-platform enablement   Arnd Bergmann
• [RFC PATCH 0/3] ARM: uncompress.h multi-platform enablement   Arnd Bergmann
• DA9053 support on mx53qsb   Arnd Bergmann
• How to get revision and serial numbers with device tree?   Arnd Bergmann
• [PATCH] ARM: mvebu: fix build breaks from multi-platform conversion   Arnd Bergmann
• [PATCH] ARM: mvebu: fix build breaks from multi-platform conversion   Arnd Bergmann
• [PATCH] ARM: optimize memset_io()/memcpy_fromio()/memcpy_toio()   Arnd Bergmann
• [PATCH 1/4] ARM: clps711x: Remove board support for CEIVA   Arnd Bergmann
• [PATCH v3 2/2] ARM: Remove mach-bcmring   Arnd Bergmann
• [GIT PULL] Renesas ARM-based SoC: KZM-9A-GT for 3.7   Arnd Bergmann
• [PATCH] ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses.   Arnd Bergmann
• [PATCH 13/24] ARM: nomadik: use __iomem pointers for MMIO   Arnd Bergmann
• [PATCH] ARM: mvebu: fix build breaks from multi-platform conversion   Arnd Bergmann
• [PATCH 00/12] New warnings and build errors in linux-next   Arnd Bergmann
• [PATCH 01/12] mtd: atmel nand: build regression   Arnd Bergmann
• [PATCH 02/12] ata: mark probe function as __devinit rather than __init   Arnd Bergmann
• [PATCH 03/12] mmc: dw_mmc: fix building exynos driver as a module   Arnd Bergmann
• [PATCH 04/12] video: exynos: warnings in exynos_dp_core.c   Arnd Bergmann
• [PATCH 05/12] ARM: ixp4xx: use __iomem for MMIO   Arnd Bergmann
• [PATCH 06/12] sched: warnings in kernel/sched/fair.c   Arnd Bergmann
• [PATCH 07/12] staging/iio/lis3l02dq: fix building without irq_to_gpio   Arnd Bergmann
• [PATCH 08/12] dtc: be more quiet with "make -s"   Arnd Bergmann
• [PATCH 09/12] tty/console: fix warnings in drivers/tty/serial/kgdboc.c   Arnd Bergmann
• [PATCH 10/12] gpio: pcf857x: select IRQ_DOMAIN   Arnd Bergmann
• [PATCH 11/12] pinctrl: samsung: use __devinit section for init code   Arnd Bergmann
• [PATCH 12/12] time/jiffies: bring back unconditional LATCH definition   Arnd Bergmann
• [PATCH 08/12] dtc: be more quiet with "make -s"   Arnd Bergmann
• ARM SoC tree, Was: Re: [PATCH 05/12] ARM: ixp4xx: use __iomem for MMIO   Arnd Bergmann
• [PATCH 07/12] staging/iio/lis3l02dq: fix building without irq_to_gpio   Arnd Bergmann
• [PATCH] arm: vt8500: Fixup for missing gpio.h   Arnd Bergmann
• Dockstar fails to boot since v3.0-rc6-6-g3835d69   Christoph Biedl
• Dockstar fails to boot since v3.0-rc6-6-g3835d69   Christoph Biedl
• Dockstar fails to boot since v3.0-rc6-6-g3835d69   Christoph Biedl
• [PATCH] ARM: OMAP2+: mux: add support for PAD wakeup event handler   Ruslan Bilovol
• [RFC PATCH 0/3] ARM: uncompress.h multi-platform enablement   Tim Bird
• [RFC PATCH 0/3] ARM: uncompress.h multi-platform enablement   Tim Bird
• [PATCH] clk: Make the managed clk functions generically available   Artem Bityutskiy
• [PATCH v2] mtd: atmel_nand: fix the compile error which miss label "err_ecc_ioremap".   Artem Bityutskiy
• [PATCH 1/1] mxc_nand : allow swapping the Bad block Indicator for NFC v1.   Artem Bityutskiy
• [PATCH v2] mtd: atmel_nand: fix the compile error which miss label "err_ecc_ioremap".   Artem Bityutskiy
• [PATCH v3 1/2] ARM: Remove bcmring NAND driver   Artem Bityutskiy
• [PATCH v2 0/9] add EDO feature for gpmi-nand driver   Artem Bityutskiy
• [GIT PULL] ARM: LPC32xx: core update   Artem Bityutskiy
• How to specify IOMMU'able devices in DT (was: [RFC 0/5] ARM: dma-mapping: New dma_map_ops to control IOVA more precisely)   James Bottomley
• [PATCH v2 2/2] ARM: delay: add registration mechanism for delay timer sources   Stephen Boyd
• [PATCH] ARM: msm: Fix sparse warnings due to incorrect type   Stephen Boyd
• [PATCH] kernel/sys.c: call disable_nonboot_cpus in kernel_restart   Stephen Boyd
• [PATCH 0/9] Move closer to single 8660/8960 zImage   Stephen Boyd
• [PATCH 1/9] ARM: msm: Don't touch GIC registers outside of GIC code   Stephen Boyd
• [PATCH 2/9] ARM: msm: Allow timer.c to compile on multiple targets   Stephen Boyd
• [PATCH 3/9] ARM: msm: Add DT support to msm_timer   Stephen Boyd
• [PATCH 4/9] ARM: msm: Move 8660 to DT timer   Stephen Boyd
• [PATCH 5/9] ARM: msm: Make 8660 a DT only target   Stephen Boyd
• [PATCH 6/9] ARM: msm: Rename board-msm8x60 to signify its DT only status   Stephen Boyd
• [PATCH 7/9] ARM: msm: Move io mapping prototypes to common.h   Stephen Boyd
• [PATCH 8/9] ARM: msm: Add DT support for 8960   Stephen Boyd
• [PATCH 9/9] ARM: msm: Remove non-DT targets from 8960   Stephen Boyd
• [PATCH] ARM: Fix deadlock scenario with smp_send_stop()   Stephen Boyd
• [PATCH] ARM: Fix semihosting Kconfig text   Stephen Boyd
• [PATCH] ARM: msm: Remove unused acpuclock-arm11   Stephen Boyd
• [PATCH] ARM: msm: Remove uncompiled board-msm7x27   Stephen Boyd
• [PATCHv2 2/2] msm: io: Change the default static iomappings to be shared   Stephen Boyd
• [PATCH 8/9] ARM: msm: Add DT support for 8960   Stephen Boyd
• [PATCH 10/9] ARM: msm: Allow msm_iomap-8x60 and msm_iomap-8960 to coexist   Stephen Boyd
• [PATCH 11/9] ARM: msm: Allow 8960 and 8660 to compile together   Stephen Boyd
• [PATCH v2] perf: Use pre-empt safe cpu_get/put insted of smp_processor_id   Stephen Boyd
• [PATCH] ARM: smp: Formalize an IPI for wakeup   Stephen Boyd
• [PATCH] ARM: Fix deadlock scenario with smp_send_stop()   Stephen Boyd
• [PATCH 2/2] arm: Add ARM ERRATA 782773 workaround   Stephen Boyd
• [PATCH] perf: Use raw_smp_processor_id insted of smp_processor_id   Stephen Boyd
• [PATCH v9 06/13] ARM: SoC: convert MSM SMP to SoC descriptor   Stephen Boyd
• [PATCH 12/24] ARM: msm: use __iomem pointers for MMIO   Stephen Boyd
• [PATCH] ARM: msm: Silence warning when CONFIG_MMC=n   Stephen Boyd
• [PATCH] ARM: smp: Formalize an IPI for wakeup   Stephen Boyd
• ARM: smp: why don't eliminate warning "Unknown IPI message 0x1"?   Stephen Boyd
• [PATCH 0/3] Introduce devm_clk_register()   Stephen Boyd
• [PATCH 1/3] clk: wm831x: Fix clk_register() error code checking   Stephen Boyd
• [PATCH 2/3] clk: Add devm_clk_{register,unregister}()   Stephen Boyd
• [PATCH 3/3] clk: wm831x: Use devm_clk_register() to simplify code   Stephen Boyd
• [PATCH 0/5] Trim down mach includes in MSM drivers   Stephen Boyd
• [PATCH 1/5] ARM: msm: Move dma.h #defines that are private to dma.c   Stephen Boyd
• [PATCH 2/5] mmc: msm_sdcc: Remove unnecessary include   Stephen Boyd
• [PATCH 3/5] video: msm: Remove useless mach/* includes   Stephen Boyd
• [PATCH 4/5] gpio: Make gpio-msm-v1 into a platform driver   Stephen Boyd
• [PATCH 5/5] ARM: msm: Remove unused cpu.h header file   Stephen Boyd
• [PATCH] ARM: hw_breakpoint: Clear breakpoints before enabling monitor mode   Stephen Boyd
• [PATCH 00/10] Convert MSM to common clock framework   Stephen Boyd
• [PATCH 01/10] usb: otg: msm: Convert to clk_prepare/unprepare   Stephen Boyd
• [PATCH 02/10] msm_sdcc: Convert to clk_prepare/unprepare   Stephen Boyd
• [PATCH 03/10] msm: iommu: Convert to clk_prepare/unprepare   Stephen Boyd
• [PATCH 04/10] msm: iommu: Use clk_set_rate() instead of clk_set_min_rate()   Stephen Boyd
• [PATCH 05/10] ARM: msm: Remove custom clk_set_flags() API   Stephen Boyd
• [PATCH 06/10] ARM: msm: Remove custom clk_set_{max,min}_rate() API   Stephen Boyd
• [PATCH 07/10] ARM: msm: Remove clock-7x30.h include file   Stephen Boyd
• [PATCH 08/10] ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver   Stephen Boyd
• [PATCH 09/10] ARM: msm: Make proc_comm clock control into a platform driver   Stephen Boyd
• [PATCH 10/10] ARM: msm: Migrate to common clock framework   Stephen Boyd
• [PATCH 2/3] clk: Add devm_clk_{register,unregister}()   Stephen Boyd
• [PATCH 2/3] clk: Add devm_clk_{register,unregister}()   Stephen Boyd
• [PATCH] ARM: hw_breakpoint: Clear breakpoints before enabling monitor mode   Stephen Boyd
• [PATCH 0/3] Introduce devm_clk_register()   Stephen Boyd
• [PATCHv2 1/3] clk: wm831x: Fix clk_register() error code checking   Stephen Boyd
• [PATCHv2 2/3] clk: Add devm_clk_{register,unregister}()   Stephen Boyd
• [PATCHv2 3/3] clk: wm831x: Use devm_clk_register() to simplify code   Stephen Boyd
• [PATCH 03/10] msm: iommu: Convert to clk_prepare/unprepare   Stephen Boyd
• [PATCH 08/10] ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver   Stephen Boyd
• [PATCH 07/10] ARM: msm: Remove clock-7x30.h include file   Stephen Boyd
• [PATCH 09/10] ARM: msm: Make proc_comm clock control into a platform driver   Stephen Boyd
• [PATCH 01/10] usb: otg: msm: Convert to clk_prepare/unprepare   Stephen Boyd
• [PATCH 10/10] ARM: msm: Migrate to common clock framework   Stephen Boyd
• [PATCH 08/11] ARM: Move some macros from entry-armv to entry-header   Stephen Boyd
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Mitch Bradley
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Mitch Bradley
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Mitch Bradley
• [PATCH 09/16] ARM: tegra: move platform_data definitions   Chris Brand
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Jassi Brar
• [PATCHv2] ARM: msm: Implement read_current_timer for msm timers   David Brown
• [PATCHv2] ARM: msm: Implement read_current_timer for msm timers   David Brown
• [PATCH] msm_serial: fix clock rate on DMA-based uarts   David Brown
• [PATCH 8/9] ARM: msm: Add DT support for 8960   David Brown
• [PATCH 05/16] ARM: msm: move platform_data definitions   David Brown
• [PATCH 3/9] ARM: msm: Add DT support to msm_timer   David Brown
• [PATCH 8/9] ARM: msm: Add DT support for 8960   David Brown
• [PATCH 8/9] ARM: msm: Add DT support for 8960   David Brown
• [PATCH v9 06/13] ARM: SoC: convert MSM SMP to SoC descriptor   David Brown
• [PATCH 1/2] ARM: SoC: convert MSM SMP to SoC descriptor   David Brown
• [PATCH 2/2] ARM: msm: Move core.h contents into common.h   David Brown
• [GIT PULL] msm-core changes for v3.7   David Brown
• [PATCH 1/2] ARM: SoC: convert MSM SMP to SoC descriptor   David Brown
• [GIT PULL 0/5] MSM changes for 3.7 merge window   David Brown
• [GIT PULL 1/5] msm cleanups   David Brown
• [GIT PULL 2/5] msm non-critical fixes   David Brown
• [GIT PULL 3/5] msm devicetree changes   David Brown
• [GIT PULL 4/5] msm board changes   David Brown
• [GIT PULL 5/5] msm all changes   David Brown
• [GIT PULL 1/5] msm cleanups (resend)   David Brown
• [PATCH 6/8] mmc: use the new <linux/sizes.h>   David Brown
• [PATCH 12/24] ARM: msm: use __iomem pointers for MMIO   David Brown
• [PATCH v2 RESEND 1/2] ARM: arch timer: Set the TVAL before timer is enabled   David Brown
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   David Brown
• [PATCH 4/5] gpio: Make gpio-msm-v1 into a platform driver   David Brown
• [PATCH] msm: clock: fix return value check in msm_clock_init()   David Brown
• [PATCH] ARM: dtb: move all dtb targets to common Makefile   David Brown
• [PATCH 1/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Mark Brown
• [PATCH 0/4] mxs/spi: Fixes and improvements   Mark Brown
• [PATCH] mxs/spi: Fix misuse of init_completion   Mark Brown
• [PATCH] ASoC: imx-mc13783: use defines instead of numerical address of register   Mark Brown
• [PATCH V2] ASoC: Davinci: McASP: add support new McASP IP Variant   Mark Brown
• [PATCH] ASoC: SAMSUNG: Add SND_SOC_DAIFMT_CONT option for snd_soc_set_fmt()   Mark Brown
• [PATCH Resend] ASoC: imx-mc13783: use defines instead of numerical address of register   Mark Brown
• [PATCH 2/4] ARM: OMAP: Split plat/hardware.h, introduce local hardware.h and soc.h for omap2+   Mark Brown
• [PATCH Resend2] ASoC: imx-mc13783: use defines instead of numerical address of register   Mark Brown
• [PATCH v2] ASoC: samsung dma - Don't indicate support for pause/resume.   Mark Brown
• [PATCHv2 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [PATCH] clk: Make the managed clk functions generically available   Mark Brown
• [PATCH] clk: Make the managed clk functions generically available   Mark Brown
• [PATCH 05/17] ASoC: Ux500: Minor coding layout changes   Mark Brown
• [PATCH 06/17] Documentation: Define the MOP500 Audio Machine Driver Device Tree bindings   Mark Brown
• [PATCH] ASoC: atmel-ssc: include linux/io.h for raw io   Mark Brown
• [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Mark Brown
• [PATCH V3] ASoC: Davinci: machine: Add device tree binding   Mark Brown
• [PATCH 00/11] ASoC: OMAP: Convert to use dmaengine   Mark Brown
• [PATCH RESEND 4/5] spi: tegra: remove support of legacy DMA driver based access   Mark Brown
• [PATCH RESEND 5/5] ASoC: tegra: remove support of legacy DMA driver based access   Mark Brown
• [PATCH 02/34] ASoC: mx27vis: retrieve gpio numbers from platform_data   Mark Brown
• [PATCH 16/34] ASoC: imx-ssi: remove unneeded mach/hardware.h inclusion   Mark Brown
• [PATCH 33/34] ARM: imx: remove header file mach/irqs.h   Mark Brown
• [PATCH v2 04/13] regulators: Versatile Express regulator driver   Mark Brown
• [PATCH v2 04/13] regulators: Versatile Express regulator driver   Mark Brown
• [PATCH v2 04/13] regulators: Versatile Express regulator driver   Mark Brown
• [PATCH 16/34] ASoC: imx-ssi: remove unneeded mach/hardware.h inclusion   Mark Brown
• [PATCH] clk: Fix release in devm_clk_put()   Mark Brown
• [PATCH 16/34] ASoC: imx-ssi: remove unneeded mach/hardware.h inclusion   Mark Brown
• [PATCH 04/29] ARM: OMAP1: Move board-ams-delta.h from plat to mach   Mark Brown
• [PATCH 08/29] ARM: OMAP2+: Make board-zoom.h local   Mark Brown
• [PATCH 02/34] ASoC: mx27vis: retrieve gpio numbers from platform_data   Mark Brown
• [PATCH 1/3] clk: wm831x: Fix clk_register() error code checking   Mark Brown
• [PATCH 3/3] clk: wm831x: Use devm_clk_register() to simplify code   Mark Brown
• [PATCH v2 00/34] i.MX multi-platform support   Mark Brown
• Pull request question for Mark (ASoC)   Mark Brown
• Pull request question for Mark (ASoC)   Mark Brown
• [PATCH v2 00/34] i.MX multi-platform support   Mark Brown
• [RESENDING] [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Mark Brown
• [GIT PULL] MOP500 Audio patches due for ASoC   Mark Brown
• [PATCH v2 04/13] regulators: Versatile Express regulator driver   Mark Brown
• [RFC PATCH 13/13] Documentation: add schedule for removing private EDMA API   Mark Brown
• [PATCH v2 04/13] regulators: Versatile Express regulator driver   Mark Brown
• [PATCH] pwm: Call pwm_enable() before pwm_config()   Mark Brown
• [PATCH] pwm: Call pwm_enable() before pwm_config()   Mark Brown
• [PATCH v3 03/15] dmaengine: Add flags parameter to dmaengine_prep_dma_cyclic()   Mark Brown
• [PATCH v4 00/14] MFD/ASoC/Input: twl4030-audio submodule DT support   Mark Brown
• [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Mark Brown
• [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support   Mark Brown
• [REPOST PATCH v2 1/2] spi: omap2-mcspi: add pinctrl support   Mark Brown
• [PATCH v2] spi/pl022: Devicetree support w/o platform data   Mark Brown
• [PATCH] spi/imx: set the inactive state of the clock according to the clock polarity   Mark Brown
• [PATCH] spi/imx: set the inactive state of the clock according to the clock polarity   Mark Brown
• [PATCH] ARM: S3C64XX: Add more Glenfarclas module ID strings   Mark Brown
• [PATCH V6 2/2] video: drm: exynos: Add device tree support   Mark Brown
• [PATCHv2 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [RFC PATCH 0/3] ARM: use C pre-processor with dtc   Mark Brown
• [RFC PATCH 0/3] ARM: use C pre-processor with dtc   Mark Brown
• [PATCH 1/2] spi:pl022: Disable/Enable functional clock from suspend/resume   Mark Brown
• [PATCH 2/3] ARM: dts: imx53-qsb: Make DA9053 regulator functional   Mark Brown
• [PATCH 1/2] spi:pl022: Disable/Enable functional clock from suspend/resume   Mark Brown
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Mark Brown
• [GIT PULL] MOP500 Audio patches due for ASoC   Mark Brown
• [PATCH v2] spi/imx: set the inactive state of the clock according to the clock polarity   Mark Brown
• [PATCH v2] ASoC: eukrea-tlv320: Convert it to platform driver   Mark Brown
• rcu self-detected stall messages on OMAP3, 4 boards   Bruce, Becky
• rcu self-detected stall messages on OMAP3, 4 boards   Bruce, Becky
• Exynos 4xxx Camera Image Filtering   Burke, Zachary
• [PATCH v2] usb: move phy driver from mach-tegra to drivers/usb   Venu Byravarasu
• [PATCH v2] usb: move phy driver from mach-tegra to drivers/usb   Venu Byravarasu
• [PATCH] arm: tegra: fixing compilation error   Venu Byravarasu
• [PATCH] arm: tegra: dt: Add pinmux entries for Vbus regulator controls   Venu Byravarasu
• [PATCH 5/8] gpio: 74x164: Add output pin support   Eric Bénard
• [PATCH 5/8] gpio: 74x164: Add output pin support   Eric Bénard
• [PATCH 5/8] gpio: 74x164: Add output pin support   Eric Bénard
• [PATCH 5/8] gpio: 74x164: Add output pin support   Eric Bénard
• [PATCH 5/8] gpio: 74x164: Add output pin support   Eric Bénard
• [PATCH v2] hvc_dcc : add support to armv4 and armv5 core   Matthieu CASTET
• [PATCH v2] hvc_dcc : add support to armv4 and armv5 core   Matthieu CASTET
• [PATCH V2] Add support for Aurora L2 Cache Controller   Gregory CLEMENT
• [PATCH V2 1/6] arm: cache-l2x0: make outer_cache_fns a field of l2x0_of_data   Gregory CLEMENT
• [PATCH V2 2/6] arm: cache-l2x0: add an optional register to save/restore   Gregory CLEMENT
• [PATCH V2 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH V2 4/6] arm: mvebu: add L2 cache support   Gregory CLEMENT
• [PATCH V2 5/6] arm: mvebu: add Aurora L2 Cache Controller to the DT   Gregory CLEMENT
• [PATCH V2 6/6] arm: l2x0: add aurora related properties to OF binding   Gregory CLEMENT
• [PATCH V2 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH V2 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH V3] Add support for Aurora L2 Cache Controller   Gregory CLEMENT
• [PATCH V3 1/6] arm: cache-l2x0: make outer_cache_fns a field of l2x0_of_data   Gregory CLEMENT
• [PATCH V3 2/6] arm: cache-l2x0: add an optional register to save/restore   Gregory CLEMENT
• [PATCH V3 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH V3 4/6] arm: mvebu: add L2 cache support   Gregory CLEMENT
• [PATCH V3 5/6] arm: mvebu: add Aurora L2 Cache Controller to the DT   Gregory CLEMENT
• [PATCH V3 6/6] arm: l2x0: add aurora related properties to OF binding   Gregory CLEMENT
• [PATCH V3 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Gregory CLEMENT
• arm: mvebu: improve Kconfig options handling for pinctrl   Gregory CLEMENT
• [PATCH 0/3] Add clock framework for armada 370/XP   Gregory CLEMENT
• [PATCH 1/3] clk: mvebu: add armada-370-xp specific clocks   Gregory CLEMENT
• [PATCH 2/3] clk: armada-370-xp: add support for clock framework   Gregory CLEMENT
• [PATCH 3/3] clocksource: time-armada-370-xp converted to clk framework   Gregory CLEMENT
• [PATCH V3 1/6] arm: cache-l2x0: make outer_cache_fns a field of l2x0_of_data   Gregory CLEMENT
• [PATCH V3 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Gregory CLEMENT
• [PATCH V4] Add support for Aurora L2 Cache Controller   Gregory CLEMENT
• [PATCH V4 1/6] arm: cache-l2x0: make outer_cache_fns a field of l2x0_of_data   Gregory CLEMENT
• [PATCH V4 2/6] arm: cache-l2x0: add an optional register to save/restore   Gregory CLEMENT
• [PATCH V4 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH V4 4/6] arm: mvebu: add L2 cache support   Gregory CLEMENT
• [PATCH V4 5/6] arm: mvebu: add Aurora L2 Cache Controller to the DT   Gregory CLEMENT
• [PATCH V4 6/6] arm: l2x0: add aurora related properties to OF binding   Gregory CLEMENT
• [PATCH V4] Add support for Aurora L2 Cache Controller   Gregory CLEMENT
• [PATCH V5] Add support for Aurora L2 Cache Controller   Gregory CLEMENT
• [PATCH V5 1/6] arm: cache-l2x0: make outer_cache_fns a field of l2x0_of_data   Gregory CLEMENT
• [PATCH V5 2/6] arm: cache-l2x0: add an optional register to save/restore   Gregory CLEMENT
• [PATCH V5 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH V5 4/6] arm: mvebu: add L2 cache support   Gregory CLEMENT
• [PATCH V5 5/6] arm: mvebu: add Aurora L2 Cache Controller to the DT   Gregory CLEMENT
• [PATCH V5 6/6] arm: l2x0: add aurora related properties to OF binding   Gregory CLEMENT
• [PATCH V5] Add support for Aurora L2 Cache Controller   Gregory CLEMENT
• [PATCH V5 1/6] arm: cache-l2x0: make outer_cache_fns a field of l2x0_of_data   Gregory CLEMENT
• [PATCH V5] Add support for Aurora L2 Cache Controller   Gregory CLEMENT
• [PATCH V5] Add support for Aurora L2 Cache Controller   Gregory CLEMENT
• [PATCH 2/6] spi: atmel: add dmaengine and dt support   Gregory CLEMENT
• [PATCH V5 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH V6 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH] davinci: fix the uart number in the comment   Henrique Camargo
• [PATCH 07/12] staging/iio/lis3l02dq: fix building without irq_to_gpio   Jonathan Cameron
• [PATCH v4 14/24] xen/arm: initialize grant_table on ARM   Ian Campbell
• [PATCH v4 14/24] xen/arm: initialize grant_table on ARM   Ian Campbell
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Ian Campbell
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Ian Campbell
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Ian Campbell
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Ian Campbell
• [PATCH] ASoC: imx-mc13783: use defines instead of numerical address of register   Gaëtan Carlier
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Gaëtan Carlier
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Gaëtan Carlier
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Gaëtan Carlier
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Gaëtan Carlier
• [PATCH v2] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Gaëtan Carlier
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Gaëtan Carlier
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Gaëtan Carlier
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Gaëtan Carlier
• [PATCH Resend] ASoC: imx-mc13783: use defines instead of numerical address of register   Gaëtan Carlier
• [PATCH 1/1] [ASoC] Fix v2: Revert 'ASoC: imx-ssi: Remove mono support'.   Gaëtan Carlier
• [PATCH 1/1] [ASoC] Fix v2: Revert 'ASoC: imx-ssi: Remove mono support'.   Gaëtan Carlier
• [PATCH Resend2] ASoC: imx-mc13783: use defines instead of numerical address of register   Gaëtan Carlier
• [PATCH 1/1] mxc_nand : allow swapping the Bad block Indicator for NFC v1.   Gaëtan Carlier
• [PATCH 1/1] mxc_nand : allow swapping the Bad block Indicator for NFC v1.   Gaëtan Carlier
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   AnilKumar Ch
• [PATCH 0/4] can: c_can: Add suspend/resume and pinctrl support   AnilKumar Ch
• [PATCH 1/4] can: c_can: Adopt pinctrl support   AnilKumar Ch
• [PATCH 2/4] can: c_can: Add d_can raminit support   AnilKumar Ch
• [PATCH 3/4] ARM: AM33XX: board-generic: Add of_dev_auxdata to pass d_can raminit   AnilKumar Ch
• [PATCH 4/4] can: c_can: Add d_can suspend resume support   AnilKumar Ch
• [PATCH v2 0/4] can: c_can: Add suspend/resume and pinctrl support   AnilKumar Ch
• [PATCH RESEND 1/4] can: c_can: Adopt pinctrl support   AnilKumar Ch
• [PATCH RESEND 2/4] can: c_can: Add d_can raminit support   AnilKumar Ch
• [PATCH RESEND 3/4] ARM: AM33XX: board-generic: Add of_dev_auxdata to pass d_can raminit   AnilKumar Ch
• [PATCH v2 4/4] can: c_can: Add d_can suspend resume support   AnilKumar Ch
• [PATCH v6 0/3] arm/dts: Add device tree data for AM33XX devices   AnilKumar Ch
• [PATCH RESEND v5 1/3] arm/dts: AM33XX: Add basic pinctrl device tree data   AnilKumar Ch
• [PATCH v6 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   AnilKumar Ch
• [PATCH RESEND v5 3/3] arm/dts: AM33XX: Add D_CAN device tree data   AnilKumar Ch
• [PATCH v7 0/3] arm/dts: Add device tree data for AM33XX devices   AnilKumar Ch
• [PATCH v7 1/3] arm/dts: AM33XX: Add basic pinctrl device tree data   AnilKumar Ch
• [PATCH v7 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   AnilKumar Ch
• [PATCH v7 3/3] arm/dts: AM33XX: Add D_CAN device tree data   AnilKumar Ch
• [PATCH 0/2] lis3: lis3lv02d_i2c: Add device tree support   AnilKumar Ch
• [PATCH 1/2] lis3: lis3lv02d_i2c: Add device tree support   AnilKumar Ch
• [PATCH 2/2] ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evm   AnilKumar Ch
• [PATCH v2 0/4] lis3: lis3lv02d_i2c: Add device tree support   AnilKumar Ch
• [PATCH v2 1/4] lis3: lis3lv02d: remove lis3lv02d driver DT init   AnilKumar Ch
• [PATCH v2 2/4] lis3: lis3lv02d_spi: Add lis3lv02d device tree init   AnilKumar Ch
• [PATCH v2 3/4] lis3: lis3lv02d_i2c: Add lis3lv02d device tree init   AnilKumar Ch
• [PATCH v2 4/4] ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evm   AnilKumar Ch
• [PATCH v3 0/4] lis3: lis3lv02d_i2c: Add device tree support   AnilKumar Ch
• [PATCH v3 1/4] lis3: lis3lv02d: remove lis3lv02d driver DT init   AnilKumar Ch
• [PATCH v3 2/4] lis3: lis3lv02d_spi: Add lis3lv02d device tree init   AnilKumar Ch
• [PATCH v3 3/4] lis3: lis3lv02d_i2c: Add lis3lv02d device tree init   AnilKumar Ch
• [PATCH v3 4/4] ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evm   AnilKumar Ch
• [PATCH] ARM: dts: AM33XX: Add temperature sensor device tree data to am335x-evm   AnilKumar Ch
• [PATCH RESEND 0/5] ARM: dts: AM33XX: Add device tree data   AnilKumar Ch
• [PATCH RESEND v7 1/5] ARM: dts: AM33XX: Add basic pinctrl device tree data   AnilKumar Ch
• [PATCH RESEND v7 2/5] ARM: dts: AM33XX: Add D_CAN device tree data   AnilKumar Ch
• [PATCH RESEND 3/5] ARM: OMAP2+: AM33XX: Add clock entries to omap_clk data   AnilKumar Ch
• [PATCH RESEND v3 4/5] ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evm   AnilKumar Ch
• [PATCH RESEND 5/5] ARM: dts: AM33XX: Add temperature sensor device tree data to am335x-evm   AnilKumar Ch
• [PATCH] ARM: dts: AM33XX: Add tsl2550 ambient light sensor DT data   AnilKumar Ch
• [PATCH] lis3lv02d: fix some comments specific to lis331dlh driver   AnilKumar Ch
• imx6q: high interrupt latencies   Gilles Chanteperdrix
• [PATCH v2 11/34] media: mx1_camera: remove the driver   Mauro Carvalho Chehab
• [PATCH 28/34] media: mx2_camera: remove mach/hardware.h inclusion   Mauro Carvalho Chehab
• [PATCH 14/34] dma: ipu: rename mach/ipu.h to include/linux/dma/ipu-dma.h   Mauro Carvalho Chehab
• [PATCH v2 27/34] media: mx2_camera: remove cpu_is_xxx by using platform_device_id   Mauro Carvalho Chehab
• [PATCH 3/3] arm: omap: Move iommu/iovmm headers to platform_data   Mauro Carvalho Chehab
• [PATCH v2 16/22] ARM: mm: cleanup checks for membank overlap with vmalloc area   Cyril Chemparathy
• [PATCH] ARM: avoid undef on ARCH_HAS_READ_CURRENT_TIMER   Cyril Chemparathy
• [PATCH] ARM: avoid undef on ARCH_HAS_READ_CURRENT_TIMER   Cyril Chemparathy
• [PATCH] ARM: avoid undef on ARCH_HAS_READ_CURRENT_TIMER   Cyril Chemparathy
• [PATCH v3 00/17] LPAE fixes and extensions for Keystone   Cyril Chemparathy
• [PATCH v3 01/17] ARM: add mechanism for late code patching   Cyril Chemparathy
• [PATCH v3 02/17] ARM: add self test for runtime patch mechanism   Cyril Chemparathy
• [PATCH v3 03/17] ARM: use late patch framework for phys-virt patching   Cyril Chemparathy
• [PATCH v3 04/17] ARM: LPAE: use phys_addr_t on virt <--> phys conversion   Cyril Chemparathy
• [PATCH v3 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Cyril Chemparathy
• [PATCH v3 06/17] ARM: LPAE: use signed arithmetic for mask definitions   Cyril Chemparathy
• [PATCH v3 07/17] ARM: LPAE: use phys_addr_t in alloc_init_pud()   Cyril Chemparathy
• [PATCH v3 08/17] ARM: LPAE: use phys_addr_t in free_memmap()   Cyril Chemparathy
• [PATCH v3 09/17] ARM: LPAE: use phys_addr_t for initrd location and size   Cyril Chemparathy
• [PATCH v3 10/17] ARM: LPAE: use phys_addr_t in switch_mm()   Cyril Chemparathy
• [PATCH v3 11/17] ARM: LPAE: use 64-bit accessors for TTBR registers   Cyril Chemparathy
• [PATCH v3 12/17] ARM: LPAE: define ARCH_LOW_ADDRESS_LIMIT for bootmem   Cyril Chemparathy
• [PATCH v3 13/17] ARM: LPAE: factor out T1SZ and TTBR1 computations   Cyril Chemparathy
• [PATCH v3 14/17] ARM: LPAE: accomodate >32-bit addresses for page table base   Cyril Chemparathy
• [PATCH v3 15/17] ARM: mm: use physical addresses in highmem sanity checks   Cyril Chemparathy
• [PATCH v3 16/17] ARM: mm: cleanup checks for membank overlap with vmalloc area   Cyril Chemparathy
• [PATCH v3 17/17] ARM: mm: clean up membank size limit checks   Cyril Chemparathy
• [PATCH] ARM: avoid undef on ARCH_HAS_READ_CURRENT_TIMER   Cyril Chemparathy
• [PATCH] ARM: avoid undef on ARCH_HAS_READ_CURRENT_TIMER   Cyril Chemparathy
• [RFC PATCH] ARM: mm: ADD descriptor string to CONFIG_DMA_ADDR_64BIT_T   Cyril Chemparathy
• [PATCH] ARM: fix type of PHYS_PFN_OFFSET to unsigned long   Cyril Chemparathy
• [PATCH] ARM: fix warning on uninitialized offset.un   Cyril Chemparathy
• [PATCH] /dev/mem: use phys_addr_t for physical addresses   Cyril Chemparathy
• [PATCH] of: specify initrd location using 64-bit   Cyril Chemparathy
• [PATCH] of: specify initrd location using 64-bit   Cyril Chemparathy
• [PATCH v2] /dev/mem: use phys_addr_t for physical addresses   Cyril Chemparathy
• [PATCH] davinci: check for presence of channel controller on slot alloc   Cyril Chemparathy
• [PATCH v2] /dev/mem: use phys_addr_t for physical addresses   Cyril Chemparathy
• [PATCH] of: specify initrd location using 64-bit   Cyril Chemparathy
• [PATCH v3 RESEND 00/17] LPAE fixes and extensions for Keystone   Cyril Chemparathy
• [PATCH v3 RESEND 01/17] ARM: add mechanism for late code patching   Cyril Chemparathy
• [PATCH v3 RESEND 02/17] ARM: add self test for runtime patch mechanism   Cyril Chemparathy
• [PATCH v3 RESEND 03/17] ARM: use late patch framework for phys-virt patching   Cyril Chemparathy
• [PATCH v3 RESEND 04/17] ARM: LPAE: use phys_addr_t on virt <--> phys conversion   Cyril Chemparathy
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Cyril Chemparathy
• [PATCH v3 RESEND 06/17] ARM: LPAE: use signed arithmetic for mask definitions   Cyril Chemparathy
• [PATCH v3 RESEND 07/17] ARM: LPAE: use phys_addr_t in alloc_init_pud()   Cyril Chemparathy
• [PATCH v3 RESEND 08/17] ARM: LPAE: use phys_addr_t in free_memmap()   Cyril Chemparathy
• [PATCH v3 RESEND 09/17] ARM: LPAE: use phys_addr_t for initrd location and size   Cyril Chemparathy
• [PATCH v3 RESEND 10/17] ARM: LPAE: use phys_addr_t in switch_mm()   Cyril Chemparathy
• [PATCH v3 RESEND 11/17] ARM: LPAE: use 64-bit accessors for TTBR registers   Cyril Chemparathy
• [PATCH v3 RESEND 12/17] ARM: LPAE: define ARCH_LOW_ADDRESS_LIMIT for bootmem   Cyril Chemparathy
• [PATCH v3 RESEND 13/17] ARM: LPAE: factor out T1SZ and TTBR1 computations   Cyril Chemparathy
• [PATCH v3 RESEND 14/17] ARM: LPAE: accomodate >32-bit addresses for page table base   Cyril Chemparathy
• [PATCH v3 RESEND 15/17] ARM: mm: use physical addresses in highmem sanity checks   Cyril Chemparathy
• [PATCH v3 RESEND 16/17] ARM: mm: cleanup checks for membank overlap with vmalloc area   Cyril Chemparathy
• [PATCH v3 RESEND 17/17] ARM: mm: clean up membank size limit checks   Cyril Chemparathy
• [PATCH v3 02/17] ARM: add self test for runtime patch mechanism   Cyril Chemparathy
• [PATCH v3 01/17] ARM: add mechanism for late code patching   Cyril Chemparathy
• [PATCH v3 17/17] ARM: mm: clean up membank size limit checks   Cyril Chemparathy
• [PATCH v3 RESEND 01/17] ARM: add mechanism for late code patching   Cyril Chemparathy
• [PATCH v3 RESEND 04/17] ARM: LPAE: use phys_addr_t on virt <--> phys conversion   Cyril Chemparathy
• [PATCH v3 RESEND 09/17] ARM: LPAE: use phys_addr_t for initrd location and size   Cyril Chemparathy
• [PATCH v3 RESEND 10/17] ARM: LPAE: use phys_addr_t in switch_mm()   Cyril Chemparathy
• [PATCH v3 RESEND 01/17] ARM: add mechanism for late code patching   Cyril Chemparathy
• [PATCH v3 RESEND 13/17] ARM: LPAE: factor out T1SZ and TTBR1 computations   Cyril Chemparathy
• [PATCH v3 RESEND 08/17] ARM: LPAE: use phys_addr_t in free_memmap()   Cyril Chemparathy
• [PATCH v3 RESEND 08/17] ARM: LPAE: use phys_addr_t in free_memmap()   Cyril Chemparathy
• [PATCH v3 RESEND 08/17] ARM: LPAE: use phys_addr_t in free_memmap()   Cyril Chemparathy
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Cyril Chemparathy
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Cyril Chemparathy
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Cyril Chemparathy
• [PATCH 0/4] Add PHY nofity for some i.mx SoCs   Peter Chen
• [PATCH 1/4] usb: phy: add notify_suspend/notify_resume callback   Peter Chen
• [PATCH 2/4] usb: mxs-phy: implement notify_suspend/notify_resume callback   Peter Chen
• [PATCH 3/4] usb: chipidea: add phy notify at suspend/resume procedure   Peter Chen
• [PATCH 4/4] usb: refine phy notify operation during connection and disconnection   Peter Chen
• Kernel fails to boot with "crc error -- System halted"   Steve Chen
• [PATCH v2 1/5] mmc: host: sdhci-s3c: Add broken-voltage DT property for broken voltage quirk   Jaehoon Chung
• [PATCH v2 1/5] mmc: host: sdhci-s3c: Add broken-voltage DT property for broken voltage quirk   Jaehoon Chung
• [PATCH v2 1/5] mmc: host: sdhci-s3c: Add broken-voltage DT property for broken voltage quirk   Jaehoon Chung
• [PATCH 1/3] mmc: sdhci: rename platform_8bit_width to platform_bus_width   Jaehoon Chung
• [PATCH 1/3] mmc: sdhci: rename platform_8bit_width to platform_bus_width   Jaehoon Chung
• [PATCH 0/8] enable support for AMBA drivers under x86   Davide Ciminaghi
• [PATCH 1/8] DMA: PL330: use prefix in reg names to build under x86   Davide Ciminaghi
• [PATCH 2/8] gpio: pl061 depends on ARM   Davide Ciminaghi
• [PATCH 3/8] pl080.h: moved from arm/include/asm/hardware to include/linux/amba/   Davide Ciminaghi
• [PATCH 4/8] watchdog: sp805_wdt depends on ARM   Davide Ciminaghi
• [PATCH 5/8] mmci: replace readsl/writesl with ioread32_rep/iowrite32_rep   Davide Ciminaghi
• [PATCH 6/8] mmc: use the new <linux/sizes.h>   Davide Ciminaghi
• [PATCH 7/8] drivers/amba: add support for a PCI bridge   Davide Ciminaghi
• [PATCH 8/8] x86: add CONFIG_ARM_AMBA, selected by STA2X11   Davide Ciminaghi
• [PATCH 2/8] gpio: pl061 depends on ARM   Davide Ciminaghi
• Converting OMAP's custom vram allocator   Rob Clark
• [alsa-devel] [RFC 1/3] ASoC: dmaengine: Don't use runtime private data for dmaengine data   Lars-Peter Clausen
• [alsa-devel] [RFC 1/3] ASoC: dmaengine: Don't use runtime private data for dmaengine data   Lars-Peter Clausen
• [PATCH] clk: Make the managed clk functions generically available   Lars-Peter Clausen
• [PATCH] clk: Make the managed clk functions generically available   Lars-Peter Clausen
• [PATCH] clk: Make the managed clk functions generically available   Lars-Peter Clausen
• [PATCH v2 03/15] dmaengine: Add no_wakeup parameter to dmaengine_prep_dma_cyclic()   Lars-Peter Clausen
• [PATCH v2 03/15] dmaengine: Add no_wakeup parameter to dmaengine_prep_dma_cyclic()   Lars-Peter Clausen
• Booting vanilla kernel on the beaglebone   Richard Cochran
• [PATCH] ARM: add finit_module syscall to ARM   Kees Cook
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Jason Cooper
• [PATCH v2] ARM: Build dtb files in all target   Jason Cooper
• [PATCH] Crypto: CESA: Add support for DT based instantiation.   Jason Cooper
• [GIT PULL] Kirkwood: board changes for v3.7   Jason Cooper
• [PATCH v2 RESEND] ARM: Build dtb files in all target   Jason Cooper
• [PATCH v2 5/6] ARM: orion: move custom gpio functions to orion-gpio.h   Jason Cooper
• [PATCH v2 6/6] ARM: make mach/gpio.h headers optional   Jason Cooper
• [PATCH 04/12] ARM: mvebu: move debug macros to include/debug   Jason Cooper
• [PATCH 10/12] ARM: mvebu: move armada-370-xp.h in mach dir   Jason Cooper
• sata_mv hangs up while probing on LaCie Kirkwood boards   Jason Cooper
• [PATCH 1/2] ARM: Kirkwood: ehci-orion: Add device tree binding   Jason Cooper
• [PATCH 2/2] ARM: Kirkwood: Convert all DT boards to EHCI via DT.   Jason Cooper
• [PATCH] Crypto: CESA: Add support for DT based instantiation.   Jason Cooper
• [PATCH V3 1/6] arm: cache-l2x0: make outer_cache_fns a field of l2x0_of_data   Jason Cooper
• [PATCH V3 2/6] arm: cache-l2x0: add an optional register to save/restore   Jason Cooper
• [PATCH V3 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Jason Cooper
• [PATCH V3 4/6] arm: mvebu: add L2 cache support   Jason Cooper
• [PATCH V3 5/6] arm: mvebu: add Aurora L2 Cache Controller to the DT   Jason Cooper
• [PATCH V3 6/6] arm: l2x0: add aurora related properties to OF binding   Jason Cooper
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Jason Cooper
• [PATCH 1/5] arm: plat-orion: use 'void __iomem *' in addr-map code   Jason Cooper
• [PATCH] ARM: Dove: allow PCI to be disabled   Jason Cooper
• [PATCH] ARM: Dove: allow PCI to be disabled   Jason Cooper
• [PATCH v2] ARM: initial DTS support for km_kirkwood   Jason Cooper
• [PATCH v3 0/6] ARM: dove: DT support for Marvell Dove   Jason Cooper
• [GIT PULL] Kirkwood: board changes for v3.7   Jason Cooper
• [GIT PULL V2] ARM: cache-l2x0 for rmk's tree   Jason Cooper
• [GIT PULL V2 1/4] ARM: Kirkwood: DT bindings for v3.7   Jason Cooper
• [GIT PULL V2 2/4] ARM: Kirkwood: boards for v3.7   Jason Cooper
• [GIT PULL V2 3/4] ARM: Kirkwood: cleanup for v3.7   Jason Cooper
• [GIT PULL V2 4/4] ARM: Kirkwood: defconfig changes for v3.7   Jason Cooper
• [PATCH V2 1/2] hwmon: Add devicetree bindings to gpio-fan   Jason Cooper
• [PATCH v3 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Jason Cooper
• [PATCH] ARM: Dove: allow PCI to be disabled   Jason Cooper
• [PATCH] ARM: Dove: allow PCI to be disabled   Jason Cooper
• [PATCH V3 1/2] hwmon: Add devicetree bindings to gpio-fan   Jason Cooper
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Jason Cooper
• [GIT PULL V2 1/4] ARM: Kirkwood: DT bindings for v3.7   Jason Cooper
• [PATCH v4] Add basic address decoding support for Marvell 370/XP   Jason Cooper
• [GIT PULL V3 1/5] ARM: Kirkwood: address decoding change for v3.7   Jason Cooper
• [GIT PULL V3 2/5] ARM: Kirkwood: DT changes for v3.7   Jason Cooper
• [GIT PULL V3 3/5] ARM: Kirkwood: board changes for v3.7   Jason Cooper
• [GIT PULL V3 4/5] ARM: Kirkwood: cleanup for v3.7   Jason Cooper
• [GIT PULL V3 5/5] ARM: Kirkwood: defconfig changes for v3.7   Jason Cooper
• [GIT PULL V4 4a/5] ARM: Kirkwood: cleanup for v3.7   Jason Cooper
• [GIT PULL V4 4b/5] ARM: Kirkwood: platform_data for v3.7   Jason Cooper
• [GIT PULL V3 2/5] ARM: Kirkwood: DT changes for v3.7   Jason Cooper
• [GIT PULL V3 4/5] ARM: Kirkwood: cleanup for v3.7   Jason Cooper
• [GIT PULL V5 0/7] ARM: kirkwood/dove/mvebu changes for v3.7   Jason Cooper
• [GIT PULL V5 1/7] ARM: kirkwood: board changes for v3.7   Jason Cooper
• [GIT PULL V5 2/7] ARM: kirkwood defconfig changes for v3.7   Jason Cooper
• [GIT PULL V5 3/7] ARM: kirkwood dt changes for v3.7   Jason Cooper
• [GIT PULL V5 4/7] ARM: kirkwood cleanup changes for v3.7   Jason Cooper
• [GIT PULL V5 5/7] ARM: kirkwood platform_data changes for v3.7   Jason Cooper
• [GIT PULL V5 6/7] ARM: kirkwood addr_decode changes for v3.7   Jason Cooper
• [GIT PULL V5 7/7] ARM: kirkwood drivers changes for v3.7   Jason Cooper
• [GIT PULL V5 0/7] ARM: kirkwood/dove/mvebu changes for v3.7   Jason Cooper
• [GIT PULL V5 5/7] ARM: kirkwood platform_data changes for v3.7   Jason Cooper
• linux-next: manual merge of the arm-soc tree with the l2-mtd tree   Jason Cooper
• [PATCH] ARM: Orion5x: Fix too small coherent pool.   Jason Cooper
• [PATCH] ARM: Orion5x: Fix too small coherent pool.   Jason Cooper
• [GIT PULL] orion5x late fixes for v3.6 (or v3.7 if too late)   Jason Cooper
• [PATCH] ARM: Orion5x: Fix too small coherent pool.   Jason Cooper
• [GIT PULL] dove late fixes for v3.7   Jason Cooper
• [PATCH V5 1/6] arm: cache-l2x0: make outer_cache_fns a field of l2x0_of_data   Jason Cooper
• [PATCH V5] Add support for Aurora L2 Cache Controller   Jason Cooper
• [PATCH V5] Add support for Aurora L2 Cache Controller   Jason Cooper
• [GIT PULL] dove late fixes for v3.7   Jason Cooper
• [GIT PULL V2] dove late fixes for v3.7   Jason Cooper
• [GIT PULL] ARM: mvebu: cache-l2x0 DT for v3.7   Jason Cooper
• [PATCH] ATA: sata_mv: Fix warnings when no PCI   Jason Cooper
• [PATCH V5] Add support for Aurora L2 Cache Controller   Jason Cooper
• [GIT PULL] ARM: mvebu: cache-l2x0 DT for v3.7   Jason Cooper
• [GIT PULL] ARM: mvebu: cache-l2x0 DT for v3.7   Jason Cooper
• [GIT PULL] ARM: mvebu: gpio fix for v3.7   Jason Cooper
• [GIT PULL] ARM: Kirkwood: build fix CACHE_FEROCEON_L2   Jason Cooper
• [PATCH 0/3] gpio-twl4030: add new device tree properties   Benoit Cousson
• [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Benoit Cousson
• [PATCH v2 0/8] ARM/dts: OMAP audio related updates for OMAP2/3/4/5   Benoit Cousson
• [PATCH] ARM: dts: OMAP4: Cleanup and move GIC outside of the OCP node   Benoit Cousson
• [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Benoit Cousson
• [PATCH] ARM: dts: OMAP4: Cleanup and move GIC outside of the OCP node   Benoit Cousson
• [PATCH] ARM: OMAP4: Fix array size for irq_target_cpu   Benoit Cousson
• [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Benoit Cousson
• [PATCH] ARM: omap_hwmod: Fix up resource names when booted with devicetree   Benoit Cousson
• [PATCH v2 0/2] gpio-twl4030: add new device tree properties   Benoit Cousson
• [PATCH] ARM: omap_hwmod: Fix up resource names when booted with devicetree   Benoit Cousson
• [PATCH] ARM: omap_hwmod: Fix up resource names when booted with devicetree   Benoit Cousson
• [PATCH] ARM: omap_hwmod: Fix up resource names when booted with devicetree   Benoit Cousson
• [PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes   Benoit Cousson
• [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Benoit Cousson
• [PATCH 2/2] ARM: OMAP: hwmod: revise deassert sequence   Benoit Cousson
• [PATCH 0/2] OMAP: hwmod: fix hardreset handling   Benoit Cousson
• [PATCH v7 0/3] arm/dts: Add device tree data for AM33XX devices   Benoit Cousson
• [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Benoit Cousson
• [PATCH] ARM: dts: omap3-beagle: Add heartbeat and mmc LEDs support   Benoit Cousson
• [PATCH v2 0/2] gpio-twl4030: add new device tree properties   Benoit Cousson
• [PATCH] ARM: dts: OMAP4: Add reg and interrupts for every nodes   Benoit Cousson
• [PATCH 1/5] arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm   Benoit Cousson
• [PATCH 1/2] gpio/twl4030: get platform data from device tree   Benoit Cousson
• [PATCH] ARM: dts: OMAP4: Add reg and interrupts for every nodes   Benoit Cousson
• [RFC PATCH] ARM: OMAP2+: omap-device: Do not overwrite resources allocated by OF layer   Benoit Cousson
• [RFC PATCH] ARM: OMAP2+: omap-device: Do not overwrite resources allocated by OF layer   Benoit Cousson
• [PATCH v3 1/8] ARM/dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Benoit Cousson
• [PATCH 1/2] gpio/twl4030: get platform data from device tree   Benoit Cousson
• [PATCH 0/2] ARM: omap/dts: Add support for Gumstix Overo with Tobi expansion   Benoit Cousson
• [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo   Benoit Cousson
• [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo   Benoit Cousson
• [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo   Benoit Cousson
• [GIT PULL] OMAP devicetree for 3.7   Benoit Cousson
• [PATCH 1/3] arm: omap: hwmod: add a new addr space in otg for writing to control module   Benoit Cousson
• [PATCH] ARM: dts: AM33XX: fix gpio node numbering to match hardware   Benoit Cousson
• [PATCH] ARM: dts: AM33XX: fix gpio node numbering to match hardware   Benoit Cousson
• [PATCH] arm/dts: omap: Add omap-usb2 dt data   Benoit Cousson
• [PATCH v2 0/3] arm/dts: omap: add dt data for MUSB   Benoit Cousson
• [PATCH v2 0/3] arm/dts: omap: add dt data for MUSB   Benoit Cousson
• [PATCH v2 1/3] arm: omap: hwmod: add a new addr space in otg for writing to control module   Benoit Cousson
• [PATCH v2 1/3] arm/dts: Add twl6030-usb data   Benoit Cousson
• [PATCH v2 0/3] arm/dts: omap: add dt data for MUSB   Benoit Cousson
• [PATCH v2 1/3] arm/dts: Add twl6030-usb data   Benoit Cousson
• [PATCH v2 2/3] arm/dts: Add twl4030-usb data   Benoit Cousson
• [PATCH v2 3/3] arm/dts: omap: Add usb_otg and glue data   Benoit Cousson
• [PATCH v2 0/3] arm/dts: omap: add dt data for MUSB   Benoit Cousson
• [PATCH] arm/dts: Add omap3-beagle.dts   Benoit Cousson
• [PATCH] arm/dts: Add omap3-beagle.dts   Benoit Cousson
• [PATCH V2] arm/dts: Add omap3-beagle.dts   Benoit Cousson
• [PATCH 2/2] arm/dts: AM33XX: Add device tree OPP table   Benoit Cousson
• [PATCH v2] arm: omap: hwmod: make *phy_48m* as the main_clk of ocp2scp   Benoit Cousson
• [PATCH 3/3] ARM: OMAP2+: hwmod code: convert missing clockdomain warnings to debug messages   Cousson, Benoit
• [PATCH v2 3/9] ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Cousson, Benoit
• [PATCH RESEND 0/5] ARM: dts: AM33XX: Add device tree data   Cousson, Benoit
• [PATCH RESEND 0/5] ARM: dts: AM33XX: Add device tree data   Cousson, Benoit
• [PATCH RESEND 0/5] ARM: dts: AM33XX: Add device tree data   Cousson, Benoit
• [PATCH 3/3] ARM: OMAP2+: hwmod code: convert missing clockdomain warnings to debug messages   Cousson, Benoit
• [PATCH V2 0/7] ARM: OMAP2+: Add device-tree support for timers   Benoit Cousson
• [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB   Benoit Cousson
• [PATCH 0/2] ARM: dts: Add subnode for ocp2scp   Benoit Cousson
• [PATCH v2 0/2] OMAP: mailbox initial device tree support   Cousson, Benoit
• [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy   Cousson, Benoit
• [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy   Cousson, Benoit
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Christopher Covington
• [PATCH v3] serial: pl011: honour serial aliases in device tree   Alan Cox
• [PATCH 10/14] tty/serial: Add kgdb_nmi driver   Alan Cox
• [PATCH 06/14] tty/serial/core: Introduce poll_init callback   Alan Cox
• [PATCH 08/14] tty/serial/kgdboc: Add and wire up clear_irqs callback   Alan Cox
• [PATCH 09/14] tty/serial/amba-pl011: Implement clear_irqs callback   Alan Cox
• [PATCH 06/14] tty/serial/core: Introduce poll_init callback   Alan Cox
• [PATCH 08/14] tty/serial/kgdboc: Add and wire up clear_irqs callback   Alan Cox
• [PATCH 08/12] tty/serial: Add kgdb_nmi driver   Alan Cox
• [PATCH 06/12] tty/serial/kgdboc: Add and wire up clear_irqs callback   Alan Cox
• [PATCH 09/17] serial/8250: Limit the omap workarounds to omap1   Alan Cox
• [PATCH 09/17] serial/8250: Limit the omap workarounds to omap1   Alan Cox
• [RFC] tty/serial/kgdboc: Add and wire up clear_irqs callback   Alan Cox
• [PATCH v7 0/11] KGDB/KDB FIQ (NMI) debugger   Alan Cox
• [PATCH 3/3] serial: pl011: allow very high baudrates   Alan Cox
• [PATCH 3/3] serial: pl011: allow very high baudrates   Alan Cox
• [PATCH 3/3] serial: pl011: allow very high baudrates   Alan Cox
• [PATCH 3/3] serial: pl011: allow very high baudrates   Alan Cox
• [PATCH 3/3] serial: pl011: allow very high baudrates   Alan Cox
• [PATCH 3/3] serial: pl011: allow very high baudrates   Alan Cox
• [PATCH 3/3] serial: pl011: allow very high baudrates   Alan Cox
• [PATCH 3/3] serial: pl011: allow very high baudrates   Alan Cox
• [PATCH] MAINTAINERS: tegra: remove Olof/Colin, add device tree files   Colin Cross
• [RFC] tty/serial/kgdboc: Add and wire up clear_irqs callback   Colin Cross
• [RFC] tty/serial/kgdboc: Add and wire up clear_irqs callback   Colin Cross
• [PATCH] pinctrl: use kasprintf() in pinmux_request_gpio()   Colin Cross
• [PATCH 0/2] ARM: enable dumping stacks for CONFIG_SMP   Colin Cross
• [PATCHv7 00/23]I2C big cleanup   Shubhrajyoti D
• [PATCHv7 01/23] i2c: omap: switch to devm_* API   Shubhrajyoti D
• [PATCHv7 02/23] i2c: omap: simplify num_bytes handling   Shubhrajyoti D
• [PATCHv7 03/23] i2c: omap: decrease indentation level on data handling   Shubhrajyoti D
• [PATCHv7 04/23] i2c: omap: add blank lines   Shubhrajyoti D
• [PATCHv7 05/23] i2c: omap: simplify omap_i2c_ack_stat()   Shubhrajyoti D
• [PATCHv7 06/23] i2c: omap: split out [XR]DR and [XR]RDY   Shubhrajyoti D
• [PATCHv7 07/23] i2c: omap: improve i462 errata handling   Shubhrajyoti D
• [PATCHv7 08/23] i2c: omap: re-factor receive/transmit data loop   Shubhrajyoti D
• [PATCHv7 09/23] i2c: omap: switch over to do {} while loop   Shubhrajyoti D
• [PATCHv7 10/23] i2c: omap: ack IRQ in parts   Shubhrajyoti D
• [PATCHv7 11/23] i2c: omap: switch to platform_get_irq()   Shubhrajyoti D
• [PATCHv7 12/23] i2c: omap: bus: add a receiver flag   Shubhrajyoti D
• [PATCHv7 13/23] i2c: omap: simplify errata check   Shubhrajyoti D
• [PATCHv7 14/23] i2c: omap: always return IRQ_HANDLED   Shubhrajyoti D
• [PATCHv7 15/23] i2c: omap: simplify IRQ exit path   Shubhrajyoti D
• [PATCHv7 16/23] i2c: omap: resize fifos before each message   Shubhrajyoti D
• [PATCHv7 17/23] i2c: omap: get rid of the "complete" label   Shubhrajyoti D
• [PATCHv7 18/23] i2c: omap: remove redundant status read   Shubhrajyoti D
• [PATCHv7 19/23] i2c: omap: always return IRQ_HANDLED   Shubhrajyoti D
• [PATCHv7 20/23] i2c: omap: switch to threaded IRQ support   Shubhrajyoti D
• [PATCHv7 21/23] i2c: omap: remove unnecessary pm_runtime_suspended check   Shubhrajyoti D
• [PATCHv7 22/23] i2c: omap: switch over to autosuspend API   Shubhrajyoti D
• [PATCHv7 23/23] i2c: omap: sanitize exit path   Shubhrajyoti D
• [PATCHv8 00/23]I2C big cleanup   Shubhrajyoti D
• [PATCHv8 01/22] i2c: omap: switch to devm_* API   Shubhrajyoti D
• [PATCHv8 02/22] i2c: omap: simplify num_bytes handling   Shubhrajyoti D
• [PATCHv8 03/22] i2c: omap: decrease indentation level on data handling   Shubhrajyoti D
• [PATCHv8 04/22] i2c: omap: add blank lines   Shubhrajyoti D
• [PATCHv8 05/22] i2c: omap: simplify omap_i2c_ack_stat()   Shubhrajyoti D
• [PATCHv8 06/22] i2c: omap: split out [XR]DR and [XR]RDY   Shubhrajyoti D
• [PATCHv8 07/22] i2c: omap: improve i462 errata handling   Shubhrajyoti D
• [PATCHv8 08/22] i2c: omap: re-factor receive/transmit data loop   Shubhrajyoti D
• [PATCHv8 09/22] i2c: omap: switch over to do {} while loop   Shubhrajyoti D
• [PATCHv8 10/22] i2c: omap: ack IRQ in parts   Shubhrajyoti D
• [PATCHv8 11/22] i2c: omap: switch to platform_get_irq()   Shubhrajyoti D
• [PATCHv8 12/22] i2c: omap: bus: add a receiver flag   Shubhrajyoti D
• [PATCHv8 13/22] i2c: omap: simplify errata check   Shubhrajyoti D
• [PATCHv8 14/22] i2c: omap: always return IRQ_HANDLED   Shubhrajyoti D
• [PATCHv8 15/22] i2c: omap: simplify IRQ exit path   Shubhrajyoti D
• [PATCHv8 16/22] i2c: omap: resize fifos before each message   Shubhrajyoti D
• [PATCHv8 17/22] i2c: omap: get rid of the "complete" label   Shubhrajyoti D
• [PATCHv8 18/22] i2c: omap: remove redundant status read   Shubhrajyoti D
• [PATCHv8 19/22] i2c: omap: switch to threaded IRQ support   Shubhrajyoti D
• [PATCHv8 20/22] i2c: omap: remove unnecessary pm_runtime_suspended check   Shubhrajyoti D
• [PATCHv8 21/22] i2c: omap: switch over to autosuspend API   Shubhrajyoti D
• [PATCHv8 22/22] i2c: omap: sanitize exit path   Shubhrajyoti D
• [PATCH] ARM: OMAP: rx51: Fix a section mismatch warn   Shubhrajyoti D
• [PATCH] serial: omap: fix the overrun case   Shubhrajyoti D
• [PATCH v2] serial: omap: fix the reciever line error case   Shubhrajyoti D
• [PATCH V4 2/2] video: drm: exynos: Add device tree support   InKi Dae
• [PATCH V4 2/2] video: drm: exynos: Add device tree support   Inki Dae
• [PATCH V4 2/2] video: drm: exynos: Add device tree support   Inki Dae
• [PATCH V5 0/2] video: drm: Add Device tree support to DRM-FIMD   Inki Dae
• [PATCH V4 2/2] video: drm: exynos: Add device tree support   Inki Dae
• [PATCH V6 2/2] video: drm: exynos: Add device tree support   Inki Dae
• [PATCH V6 2/2] video: drm: exynos: Add device tree support   Inki Dae
• [PATCH V6 2/2] video: drm: exynos: Add device tree support   Inki Dae
• [PATCH V6 2/2] video: drm: exynos: Add device tree support   Inki Dae
• [PATCH 00/15] KVM/ARM Implementation   Christoffer Dall
• [PATCH 01/15] ARM: add mem_type prot_pte accessor   Christoffer Dall
• [PATCH 02/15] ARM: Add page table and page defines needed by KVM   Christoffer Dall
• [PATCH 03/15] ARM: Section based HYP idmap   Christoffer Dall
• [PATCH 04/15] ARM: idmap: only initialize HYP idmap when HYP mode is available   Christoffer Dall
• [PATCH 05/15] ARM: Expose PMNC bitfields for KVM use   Christoffer Dall
• [PATCH 06/15] KVM: ARM: Initial skeleton to compile KVM support   Christoffer Dall
• [PATCH 07/15] KVM: ARM: Hypervisor inititalization   Christoffer Dall
• [PATCH 08/15] KVM: ARM: Memory virtualization setup   Christoffer Dall
• [PATCH 09/15] KVM: ARM: Inject IRQs and FIQs from userspace   Christoffer Dall
• [PATCH 10/15] KVM: ARM: World-switch implementation   Christoffer Dall
• [PATCH 11/15] KVM: ARM: Emulation framework and CP15 emulation   Christoffer Dall
• [PATCH 12/15] KVM: ARM: User space API for getting/setting co-proc registers   Christoffer Dall
• [PATCH 13/15] KVM: ARM: Handle guest faults in KVM   Christoffer Dall
• [PATCH 14/15] KVM: ARM: Handle I/O aborts   Christoffer Dall
• [PATCH 15/15] KVM: ARM: Guest wait-for-interrupts (WFI) support   Christoffer Dall
• [PATCH 01/10] ARM: KVM: Keep track of currently running vcpus   Christoffer Dall
• [PATCH 02/10] ARM: KVM: Initial VGIC infrastructure support   Christoffer Dall
• [PATCH 03/10] ARM: KVM: Initial VGIC MMIO support code   Christoffer Dall
• [PATCH 04/10] ARM: KVM: VGIC distributor handling   Christoffer Dall
• [PATCH 05/10] ARM: KVM: VGIC virtual CPU interface management   Christoffer Dall
• [PATCH 06/10] ARM: KVM: VGIC interrupt injection   Christoffer Dall
• [PATCH 07/10] ARM: KVM: VGIC control interface world switch   Christoffer Dall
• [PATCH 08/10] ARM: KVM: VGIC initialisation code   Christoffer Dall
• [PATCH 09/10] ARM: KVM: vgic: reduce the number of vcpu kick   Christoffer Dall
• [PATCH 10/10] ARM: KVM: Add VGIC configuration option   Christoffer Dall
• [PATCH 1/5] ARM: arch_timers: switch to physical timers if HYP mode is available   Christoffer Dall
• [PATCH 2/5] ARM: KVM: arch_timers: Add minimal infrastructure   Christoffer Dall
• [PATCH 3/5] ARM: KVM: arch_timers: Add guest timer core support   Christoffer Dall
• [PATCH 4/5] ARM: KVM: arch_timers: Add timer world switch   Christoffer Dall
• [PATCH 5/5] ARM: KVM: arch_timers: Wire the init code and config option   Christoffer Dall
• [PATCH 00/15] KVM/ARM Implementation   Christoffer Dall
• [PATCH 02/15] ARM: Add page table and page defines needed by KVM   Christoffer Dall
• [PATCH 02/15] ARM: Add page table and page defines needed by KVM   Christoffer Dall
• [PATCH 01/15] ARM: add mem_type prot_pte accessor   Christoffer Dall
• [PATCH 01/15] ARM: add mem_type prot_pte accessor   Christoffer Dall
• [PATCH 02/15] ARM: Add page table and page defines needed by KVM   Christoffer Dall
• [PATCH 05/15] ARM: Expose PMNC bitfields for KVM use   Christoffer Dall
• [PATCH 02/15] ARM: Add page table and page defines needed by KVM   Christoffer Dall
• [PATCH 04/15] ARM: idmap: only initialize HYP idmap when HYP mode is available   Christoffer Dall
• [PATCH 01/15] ARM: add mem_type prot_pte accessor   Christoffer Dall
• [PATCH 13/15] KVM: ARM: Handle guest faults in KVM   Christoffer Dall
• [PATCH 06/15] KVM: ARM: Initial skeleton to compile KVM support   Christoffer Dall
• [PATCH 13/15] KVM: ARM: Handle guest faults in KVM   Christoffer Dall
• [PATCH 13/15] KVM: ARM: Handle guest faults in KVM   Christoffer Dall
• [PATCH 09/15] KVM: ARM: Inject IRQs and FIQs from userspace   Christoffer Dall
• [PATCH 15/15] KVM: ARM: Guest wait-for-interrupts (WFI) support   Christoffer Dall
• [kvmarm] [PATCH 10/15] KVM: ARM: World-switch implementation   Christoffer Dall
• [kvmarm] [PATCH 10/15] KVM: ARM: World-switch implementation   Christoffer Dall
• [PATCH 09/15] KVM: ARM: Inject IRQs and FIQs from userspace   Christoffer Dall
• [PATCH 10/15] KVM: ARM: World-switch implementation   Christoffer Dall
• [PATCH 06/15] KVM: ARM: Initial skeleton to compile KVM support   Christoffer Dall
• [PATCH 14/15] KVM: ARM: Handle I/O aborts   Christoffer Dall
• [PATCH 03/15] ARM: Section based HYP idmap   Christoffer Dall
• [PATCHv7 00/23]I2C big cleanup   Shubhrajyoti Datta
• [PATCH] RTC: TWL: ensure all interrupts are disabled during probe   Shubhrajyoti Datta
• [PATCH] RTC: TWL: ensure all interrupts are disabled during probe   Shubhrajyoti Datta
• [PATCH] ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints   Shubhrajyoti Datta
• [PATCH] serial: omap: fix the overrun case   Shubhrajyoti Datta
• [PATCH] serial: omap: fix the overrun case   Shubhrajyoti Datta
• [PATCH 1/3] ARM: Remove bcmring NAND driver   Christian Daudt
• [PATCH 1/3] ARM: Remove bcmring NAND driver   Christian Daudt
• [PATCH 1/3] ARM: Remove bcmring NAND driver   Christian Daudt
• [PATCH v2 1/2] ARM: Remove bcmring NAND driver   Christian Daudt
• [PATCH v3 0/2] ARM: Removal of bcmring   Christian Daudt
• [PATCH v3 1/2] ARM: Remove bcmring NAND driver   Christian Daudt
• [PATCH v3 2/2] ARM: Remove mach-bcmring   Christian Daudt
• [PATCH 2/2] ARM: allow for ATAGS to be configured out when DT support is selected   Will Deacon
• [PATCH] ARM: ux500: Fix build error due to missing include of asm/pmu.h in cpu-db8500.c   Will Deacon
• [PATCH v2 2/2] ARM: delay: add registration mechanism for delay timer sources   Will Deacon
• [PATCH v2 2/2] ARM: delay: add registration mechanism for delay timer sources   Will Deacon
• [PATCH V2 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Will Deacon
• [PATCH V2 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Will Deacon
• [PATCH v2 2/2] ARM: delay: add registration mechanism for delay timer sources   Will Deacon
• [PATCHv2] ARM: msm: Implement read_current_timer for msm timers   Will Deacon
• [PATCH v2 1/2] ARM: shmobile: sh73a0: enable PMU(Performance Monitoring Unit)   Will Deacon
• [PATCH V3 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Will Deacon
• [PATCH v3 0/2] ARM: shmobile: enable PMU(Performance Monitoring Unit)   Will Deacon
• [PATCH V3 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Will Deacon
• [PATCH v3 0/2] ARM: shmobile: enable PMU(Performance Monitoring Unit)   Will Deacon
• [PATCH 2/2] ARM: kexec: Check segment memory addresses   Will Deacon
• [PATCH v2 2/2] ARM: delay: add registration mechanism for delay timer sources   Will Deacon
• [GIT] Renesas ARM-based SoC: pmu/cleanup for 3.7   Will Deacon
• [PATCH] ARM: avoid undef on ARCH_HAS_READ_CURRENT_TIMER   Will Deacon
• [PATCH] ARM: avoid undef on ARCH_HAS_READ_CURRENT_TIMER   Will Deacon
• [PATCH] ARM: avoid undef on ARCH_HAS_READ_CURRENT_TIMER   Will Deacon
• [PATCH] ARM: avoid undef on ARCH_HAS_READ_CURRENT_TIMER   Will Deacon
• [PATCH 1/3] ARM: Remove bcmring NAND driver   Will Deacon
• ARM: hw_breakpoint: silent EPERM when setting ARM_DSCR_MDBGEN on ARM_DEBUG_ARCH_V7_ECP14   Will Deacon
• [PATCH v2] ARM: perf: add guest vs host discrimination   Will Deacon
• ARM: hw_breakpoint: silent EPERM when setting ARM_DSCR_MDBGEN on ARM_DEBUG_ARCH_V7_ECP14   Will Deacon
• [PATCH 00/15] KVM/ARM Implementation   Will Deacon
• [PATCH 01/15] ARM: add mem_type prot_pte accessor   Will Deacon
• [PATCH 02/15] ARM: Add page table and page defines needed by KVM   Will Deacon
• [PATCH 03/15] ARM: Section based HYP idmap   Will Deacon
• [PATCH 04/15] ARM: idmap: only initialize HYP idmap when HYP mode is available   Will Deacon
• [PATCH 05/15] ARM: Expose PMNC bitfields for KVM use   Will Deacon
• [PATCH 02/15] ARM: Add page table and page defines needed by KVM   Will Deacon
• [kvmarm] [PATCH 05/15] ARM: Expose PMNC bitfields for KVM use   Will Deacon
• [PATCH 0/4] Fix PROT_NONE page permissions when !CPU_USE_DOMAINS   Will Deacon
• [PATCH 1/4] ARM: mm: use pteval_t to represent page protection values   Will Deacon
• [PATCH 2/4] ARM: mm: don't use the access flag permissions mechanism for classic MMU   Will Deacon
• [PATCH 3/4] ARM: mm: introduce L_PTE_VALID for page table entries   Will Deacon
• [PATCH 4/4] ARM: mm: introduce present, faulting entries for PAGE_NONE   Will Deacon
• [RESEND PATCH 1/2] ARM: kexec: scan for dtb magic in segments   Will Deacon
• [RESEND PATCH 2/2] ARM: kexec: Check segment memory addresses   Will Deacon
• [RESEND PATCH 0/3] New algorithm for ASID allocation and rollover   Will Deacon
• [RESEND PATCH 1/3] ARM: mm: remove IPI broadcasting on ASID rollover   Will Deacon
• [RESEND PATCH 2/3] ARM: mm: avoid taking ASID spinlock on fastpath   Will Deacon
• [RESEND PATCH 3/3] ARM: mm: use bitmap operations when allocating new ASIDs   Will Deacon
• [PATCH] ARM: hw_breakpoint: Clear breakpoints before enabling monitor mode   Will Deacon
• [PATCH 1/4] ARM: mm: use pteval_t to represent page protection values   Will Deacon
• [PATCH V3 0/8] ARM: OMAP4: Add PMU Support   Will Deacon
• [PATCH 3/4] ARM: mm: introduce L_PTE_VALID for page table entries   Will Deacon
• [PATCH 0/4] Fix PROT_NONE page permissions when !CPU_USE_DOMAINS   Will Deacon
• [PATCH V4 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Will Deacon
• [PATCH v3 2/2] ARM: Remove mach-bcmring   Will Deacon
• [PATCH] arm: add SDIV/UDIV emulation for ARMv7 processors   Will Deacon
• [GIT PULL] Veratile Express updates for v3.7   Will Deacon
• [PATCH] ARM: hw_breakpoint: Clear breakpoints before enabling monitor mode   Will Deacon
• [PATCH] ARM: hw_breakpoint: Clear breakpoints before enabling monitor mode   Will Deacon
• [PATCH 0/1] Fix segfault in DTC   Will Deacon
• [PATCH 06/15] KVM: ARM: Initial skeleton to compile KVM support   Will Deacon
• [PATCH 09/15] KVM: ARM: Inject IRQs and FIQs from userspace   Will Deacon
• [PATCH 10/15] KVM: ARM: World-switch implementation   Will Deacon
• [PATCH 15/15] KVM: ARM: Guest wait-for-interrupts (WFI) support   Will Deacon
• [PATCH v6 0/3] Updated Cortex-M3 series   Will Deacon
• [PATCH 06/15] KVM: ARM: Initial skeleton to compile KVM support   Will Deacon
• [PATCH 14/15] KVM: ARM: Handle I/O aborts   Will Deacon
• [kvmarm] [PATCH 06/15] KVM: ARM: Initial skeleton to compile KVM support   Will Deacon
• [PATCH] ARM: optimize memset_io()/memcpy_fromio()/memcpy_toio()   Will Deacon
• [PATCH] ARM: optimize memset_io()/memcpy_fromio()/memcpy_toio()   Will Deacon
• [PATCH 09/15] KVM: ARM: Inject IRQs and FIQs from userspace   Will Deacon
• [PATCH v2 03/13] hwmon: Versatile Express hwmon driver   Jean Delvare
• [PATCH] i2c: i2c-gpio: fix issue when DT node greater than 1   Jean Delvare
• [PATCH 1/3] i2c: i2c-mux-gpio: Use devm_kzalloc instead of kzalloc   Jean Delvare
• [PATCH v4] hwmon: Versatile Express hwmon driver   Jean Delvare
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Wolfgang Denk
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Wolfgang Denk
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Stijn Devriendt
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Stijn Devriendt
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Stijn Devriendt
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Stijn Devriendt
• [PATCH] arm: tegra: dt: Add pinmux entries for Vbus regulator controls   Laxman Dewangan
• [PATCH] ARM: davinci: da8xx_register_spi() should not register SPI board info   Vivien Didelot
• [PATCH] hwmon: (sht15) move header to linux/platform_data/   Vivien Didelot
• [PATCH] hwmon: (sht15) move header to linux/platform_data/   Vivien Didelot
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Ben Dooks
• [RFC 0/5] ARM: dma-mapping: New dma_map_ops to control IOVA more precisely   Hiroshi Doyu
• [RFC 0/5] ARM: dma-mapping: New dma_map_ops to control IOVA more precisely   Hiroshi Doyu
• How to specify IOMMU'able devices in DT (was: [RFC 0/5] ARM: dma-mapping: New dma_map_ops to control IOVA more precisely)   Hiroshi Doyu
• How to specify IOMMU'able devices in DT (was: [RFC 0/5] ARM: dma-mapping: New dma_map_ops to control IOVA more precisely)   Hiroshi Doyu
• How to specify IOMMU'able devices in DT   Hiroshi Doyu
• [RFC PATCH 1/3] amba-clcd: Add Device Tree support to amba-clcd driver   Liviu Dudau
• [RFC PATCH 3/3] ARM: vexpress: configure CLCD driver device tree support for A9 CoreTile   Liviu Dudau
• [PATCH v3 0/2] Renesas IPMMU driver for sh7372   Hideki EIRAKU
• [PATCH v3 1/2] iommu/shmobile: Add iommu driver for Renesas IPMMU modules   Hideki EIRAKU
• [PATCH v3 2/2] ARM: mach-shmobile: sh7372: Add IPMMU device   Hideki EIRAKU
• [PATCH v3 1/2] iommu/shmobile: Add iommu driver for Renesas IPMMU modules   Hideki EIRAKU
• [PATCH] USB: ohci-at91: fix PIO handling in relation with number of ports   Joachim Eastwood
• [PATCH] USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq   Joachim Eastwood
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Joachim Eastwood
• [PATCH v2 1/2] hw_random: mxc-rnga: Adapt clocks to new i.mx clock framework   Fabio Estevam
• [PATCH] ARM: mx28evk: Add I2C EEPROM support   Fabio Estevam
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Fabio Estevam
• [PATCH 0/7] Add support for Freescale's mc34708 to mc13xxx driver   Fabio Estevam
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Fabio Estevam
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Fabio Estevam
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Fabio Estevam
• DTS support for the Iomega ix2-200   Fabio Estevam
• [PATCH 01/11] ARM: defconfig: Remove CONFIG_MISC_DEVICES   Fabio Estevam
• Early crash on linux-nex:t 20120906   Fabio Estevam
• [PATCH 4/4] efikamx: remove Efika MX-specific CHRGVBUS hack from the USB driver   Fabio Estevam
• Early crash on linux-nex:t 20120906   Fabio Estevam
• [PATCH 1/2] ARM: dts: mx23: Add USB resources   Fabio Estevam
• [PATCH 2/2] ARM: dts: imx23-olinuxino: Add USB host support   Fabio Estevam
• [PATCH] ARM: imx_v6_v7_defconfig: Enable CONFIG_GPIO_MC9S08DZ60   Fabio Estevam
• [PATCH v2] ARM: imx_v6_v7_defconfig: Enable CONFIG_GPIO_MC9S08DZ60   Fabio Estevam
• [PATCH 05/24] ARM: imx: use __iomem pointers for MMIO   Fabio Estevam
• [PATCH] ARM: imx: armadillo5x0: Fix illegal register access   Fabio Estevam
• [PATCH v2] ARM: imx: armadillo5x0: Fix illegal register access   Fabio Estevam
• [PATCH V4] MXS: Implement DMA support into mxs-i2c   Fabio Estevam
• [PATCH v3] ARM: imx: armadillo5x0: Fix illegal register access   Fabio Estevam
• [PATCH v2 2/2] ARM: dts: imx23-olinuxino: Add USB host support   Fabio Estevam
• [PATCH 2/2] ARM: dts: imx23-olinuxino: Add USB host support   Fabio Estevam
• [PATCH 01/11] ARM: defconfig: Remove CONFIG_MISC_DEVICES   Fabio Estevam
• [PATCH 01/11] ARM: defconfig: Remove CONFIG_MISC_DEVICES   Fabio Estevam
• [PATCH] spi/imx: set the inactive state of the clock according to the clock polarity   Fabio Estevam
• [PATCH v2] ASoC: eukrea-tlv320: Convert it to platform driver   Fabio Estevam
• [PATCH] ARM: dts: imx28-evk: Use pinctrl for gpio-led   Fabio Estevam
• [PATCH] ARM: dts: imx28-evk: Use pinctrl for gpio-led   Fabio Estevam
• [PATCH v2] ARM: dts: imx28-evk: Use pinctrl for gpio-led   Fabio Estevam
• [PATCH 1/2] ARM: dts: imx23-olinuxino: Remove unneeded "default-on"   Fabio Estevam
• [PATCH 2/2] ARM: dts: imx23-olinuxino: Use pinctrl for gpio-led   Fabio Estevam
• [PATCH] ARM: mxs_defconfig: Improve USB related support   Fabio Estevam
• [PATCH] ARM: mxs_defconfig: Improve USB related support   Fabio Estevam
• [PATCH] ARM: dts: imx6q-sabreauto: Add basic support   Fabio Estevam
• [PATCH] ARM: dts: imx27-3ds: Remove local watchdog inclusion   Fabio Estevam
• DA9053 support on mx53qsb   Fabio Estevam
• [PATCH 1/3] ARM: dts: imx53-qsb: Use pinctrl for gpio-led   Fabio Estevam
• [PATCH 2/3] ARM: dts: imx53-qsb: Make DA9053 regulator functional   Fabio Estevam
• [PATCH 3/3] ARM: imx_v6_v7_defconfig: Add DA9052 regulator support   Fabio Estevam
• [PATCH 2/3] ARM: dts: imx53-qsb: Make DA9053 regulator functional   Fabio Estevam
• DA9053 support on mx53qsb   Fabio Estevam
• Using ipuv3 driver with device tree   Fabio Estevam
• Using ipuv3 driver with device tree   Fabio Estevam
• [PATCH 1/8] gpio: 74x164: Use module_spi_driver boiler plate function   Florian Fainelli
• [PATCH 2/8] gpio: 74x164: Use devm_kzalloc   Florian Fainelli
• [PATCH 3/8] gpio: 74x164: Remove platform data and use dynamic gpio number assignment   Florian Fainelli
• [PATCH 4/8] gpio: 74x164: Add device tree support   Florian Fainelli
• [PATCH 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Florian Fainelli
• [PATCH 3/7] gpio: 74x164: Use dynamic gpio number assignment if no pdata is present   Florian Fainelli
• [PATCH 5/7] gpio: 74x164: Add support for the daisy-chaining   Florian Fainelli
• [PATCH] ARM: Add BUG_ON when hlt counter is wrongly used   FanWu
• [PATCH 3/8] i2c: at91: use an id table for SoC dependent parameters   Nicolas Ferre
• [PATCH 0/8] i2c: at91: cleanup and dt support   Nicolas Ferre
• [PATCH] USB: ohci-at91: fix PIO handling in relation with number of ports   Nicolas Ferre
• [PATCH 00/10] net/macb: driver enhancement concerning GEM support, ring logic and cleanup   Nicolas Ferre
• [PATCH 01/10] net/macb: Add support for Gigabit Ethernet mode   Nicolas Ferre
• [PATCH 02/10] net/macb: memory barriers cleanup   Nicolas Ferre
• [PATCH 03/10] net/macb: change debugging messages   Nicolas Ferre
• [PATCH 04/10] net/macb: Fix a race in macb_start_xmit()   Nicolas Ferre
• [PATCH 05/10] net/macb: clean up ring buffer logic   Nicolas Ferre
• [PATCH 06/10] net/macb: better manage tx errors   Nicolas Ferre
• [PATCH 07/10] net/macb: tx status is more than 8 bits now   Nicolas Ferre
• [PATCH 08/10] net/macb: macb_get_drvinfo: add GEM/MACB suffix to differentiate revision   Nicolas Ferre
• [PATCH 09/10] net/macb: ethtool interface: add register dump feature   Nicolas Ferre
• [PATCH 10/10] net/macb: Offset first RX buffer by two bytes   Nicolas Ferre
• [PATCH 08/10] net/macb: macb_get_drvinfo: add GEM/MACB suffix to differentiate revision   Nicolas Ferre
• [PATCH v2 09/10] net/macb: ethtool interface: add register dump feature   Nicolas Ferre
• [PATCH 04/10] net/macb: Fix a race in macb_start_xmit()   Nicolas Ferre
• [PATCH] usb: gadget: at91_udc: fix dt support   Nicolas Ferre
• [PATCH 04/10] net/macb: Fix a race in macb_start_xmit()   Nicolas Ferre
• [PATCH v11 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   Nicolas Ferre
• [PATCH 03/14] arm: at91: at91sam9x5: fix gpio number per bank   Nicolas Ferre
• [PATCH 04/14] ARM: at91: add dummies pinctrl for non dt platform   Nicolas Ferre
• [PATCH 05/14] ARM: at91: add pinctrl support   Nicolas Ferre
• [PATCH 06/14] arm: at91: dt: at91sam9 add pinctrl support   Nicolas Ferre
• [PATCH 07/14] arm: at91: dt: at91sam9 add serial pinctrl support   Nicolas Ferre
• [PATCH 08/14] tty: atmel_serial: add pinctrl support   Nicolas Ferre
• [PATCH 09/14] arm: at91: dt: sam9m10g45ek: use rts/cts pinctrl group for uart1   Nicolas Ferre
• [PATCH 10/14] arm: at91: dt: sam9263ek: use rts/cts pinctrl group for uart0   Nicolas Ferre
• [PATCH 11/14] arm: at91: dt: sam9g20ek: use rts/cts/dtr/dsr/dcd/ri pinctrl group for uart0   Nicolas Ferre
• [PATCH] ASoC: atmel-ssc: include linux/io.h for raw io   Nicolas Ferre
• [PATCH 01/16] ARM: at91: move platform_data definitions   Nicolas Ferre
• [PATCH 1/2] dmaengine: at_hdmac: fix comment in atc_prep_slave_sg()   Nicolas Ferre
• [PATCH 2/2] dmaengine: at_hdmac: check that each sg data length is non-null   Nicolas Ferre
• [PATCH v11 0/4] AT91: replace old i2c-at91.c TWI driver   Nicolas Ferre
• [PATCH v3 0/8] i2c: at91: cleanup and dt support   Nicolas Ferre
• [PATCH V5 1/2] of: Add generic device tree DMA helpers   Nicolas Ferre
• [PATCH 02/24] ARM: at91: use __iomem pointers for MMIO   Nicolas Ferre
• [PATCH v3] input: qt1070: Add device tree support   Nicolas Ferre
• [PATCH v3 04/15] dmaengine: Pass flags via device_prep_dma_cyclic() callback   Nicolas Ferre
• [GIT PULL] at91: one fix for 3.6   Nicolas Ferre
• [PATCH v2 0/9] net/macb: driver enhancement concerning GEM support, ring logic and cleanup   Nicolas Ferre
• [PATCH v2 1/9] net/macb: Add support for Gigabit Ethernet mode   Nicolas Ferre
• [PATCH v2 2/9] net/macb: memory barriers cleanup   Nicolas Ferre
• [PATCH v2 3/9] net/macb: change debugging messages   Nicolas Ferre
• [PATCH v2 4/9] net/macb: remove macb_get_drvinfo()   Nicolas Ferre
• [PATCH v2 5/9] net/macb: tx status is more than 8 bits now   Nicolas Ferre
• [PATCH v2 6/9] net/macb: clean up ring buffer logic   Nicolas Ferre
• [PATCH v2 7/9] net/macb: ethtool interface: add register dump feature   Nicolas Ferre
• [RFC PATCH v2 8/9] net/macb: better manage tx errors   Nicolas Ferre
• [PATCH v2 9/9] net/macb: Offset first RX buffer by two bytes   Nicolas Ferre
• [PATCH] at91ether: return PTR_ERR if call to clk_get fails   Nicolas Ferre
• [PATCH v2] mtd: atmel_nand: fix the compile error which miss label "err_ecc_ioremap".   Nicolas Ferre
• [PATCH v2 0/9] net/macb: driver enhancement concerning GEM support, ring logic and cleanup   Nicolas Ferre
• [PATCH] USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq   Nicolas Ferre
• [PATCH v3 1/2] watchdog: at91sam9_wdt: add device tree support   Nicolas Ferre
• [PATCH] USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq   Nicolas Ferre
• [PATCH v3 1/2] watchdog: at91sam9_wdt: add device tree support   Nicolas Ferre
• [PATCH 07/16] ARM: at91: add pinctrl support   Nicolas Ferre
• [PATCH 6/6] spi: atmel: add dt property for DMA configuration for sam9x5 and sam9n12   Nicolas Ferre
• [PATCH 3/6] ARM: at91: add clocks for spi DT entries   Nicolas Ferre
• [PATCH] USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq   Nicolas Ferre
• [PATCH 1/6] ARM: dts: Move parts common to Exynos4 from Exynos4210.dtsi to Exynos4.dtsi   Tomasz Figa
• [PATCH 4/6] ARM: Exynos4: Add OF compatibility lookups for Exynos4 i2c adapters   Tomasz Figa
• [PATCH 6/6] ARM: Exynos: Add basic dts file for Samsung Trats board   Tomasz Figa
• [PATCH 0/3] ARM: dts: Exynos4 dts reorganization   Tomasz Figa
• [PATCH 1/3] ARM: dts: Move parts common to Exynos4 from Exynos4210.dtsi to Exynos4.dtsi   Tomasz Figa
• [PATCH 2/3] ARM: EXYNOS: exynos4-dt: Use exynos4 prefix instead of exynos4210   Tomasz Figa
• [PATCH 3/3] ARM: dts: exynos4: Assume status of all optional nodes as disabled   Tomasz Figa
• [PATCH] ARM: dts: exynos4: Enable serial controllers on Origen and SMDKV310   Tomasz Figa
• [PATCH v2 0/5] ARM: EXYNOS: Add support for Trats board using device tree   Tomasz Figa
• [PATCH v2 1/5] mmc: host: sdhci-s3c: Add broken-voltage DT property for broken voltage quirk   Tomasz Figa
• [PATCH v2 2/5] ARM: Exynos4: dts: Specify address and size cells for i2c controllers   Tomasz Figa
• [PATCH v2 3/5] ARM: Exynos4: Add OF compatibility lookups for Exynos4 i2c adapters   Tomasz Figa
• [PATCH v2 4/5] ARM: EXYNOS: Increase maximum possible memory bank size to 512MiB   Tomasz Figa
• [PATCH v2 5/5] ARM: Exynos: Add basic dts file for Samsung Trats board   Tomasz Figa
• [PATCH v2 5/5] ARM: Exynos: Add basic dts file for Samsung Trats board   Tomasz Figa
• [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Tomasz Figa
• [PATCH 1/2] i2c: s3c2410: add optional pin configuration using pinctrl interface   Tomasz Figa
• [PATCH 0/3] ARM: EXYNOS: Power domain DT support extension   Tomasz Figa
• [PATCH 1/3] ARM: EXYNOS: pm_domain: Detect domain state on registration from DT   Tomasz Figa
• [PATCH 2/3] ARM: EXYNOS: pm_domain: Fix power domain name initialization   Tomasz Figa
• [PATCH 3/3] ARM: EXYNOS: pm_domain: Bind devices to power domains using DT   Tomasz Figa
• [PATCH 2/2] ARM: dts: exynos4: allow i2c0 bus to be configured using pinctrl interface   Tomasz Figa
• [PATCH 1/2] i2c: s3c2410: add optional pin configuration using pinctrl interface   Tomasz Figa
• [PATCH] ARM: dts: exynos4: Enable serial controllers on Origen and SMDKV310   Tomasz Figa
• [PATCH v2 4/5] ARM: EXYNOS: Increase maximum possible memory bank size to 512MiB   Tomasz Figa
• [PATCH v2 5/5] ARM: Exynos: Add basic dts file for Samsung Trats board   Tomasz Figa
• [PATCH 2/3] ARM: EXYNOS: pm_domain: Fix power domain name initialization   Tomasz Figa
• [PATCH 3/3] ARM: EXYNOS: pm_domain: Bind devices to power domains using DT   Tomasz Figa
• [PATCH v5 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Tomasz Figa
• [PATCH 0/5] ARM: EXYNOS: Add secure firmware support   Tomasz Figa
• [PATCH 1/5] ARM: EXYNOS: Add IO mapping for non-secure SYSRAM.   Tomasz Figa
• [PATCH 2/5] ARM: Add interface for registering and calling firmware-specific operations   Tomasz Figa
• [PATCH 3/5] ARM: EXYNOS: Add support for secure monitor calls   Tomasz Figa
• [PATCH 4/5] ARM: EXYNOS: Add support for Exynos secure firmware   Tomasz Figa
• [PATCH 5/5] ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up   Tomasz Figa
• [PATCH 2/5] ARM: Add interface for registering and calling firmware-specific operations   Tomasz Figa
• [PATCH 4/5] ARM: EXYNOS: Add support for Exynos secure firmware   Tomasz Figa
• [PATCH v2 1/5] mmc: host: sdhci-s3c: Add broken-voltage DT property for broken voltage quirk   Tomasz Figa
• [PATCH v2 1/5] mmc: host: sdhci-s3c: Add broken-voltage DT property for broken voltage quirk   Tomasz Figa
• [PATCH v2 1/5] mmc: host: sdhci-s3c: Add broken-voltage DT property for broken voltage quirk   Tomasz Figa
• [PATCH 0/3] ARM: EXYNOS: Power domain DT support extension   Tomasz Figa
• [PATCH 0/5] ARM: EXYNOS: Add secure firmware support   Tomasz Figa
• [PATCH 0/6] pinctrl: samsung: Various fixes   Tomasz Figa
• [PATCH 1/6] pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa   Tomasz Figa
• [PATCH 2/6] pinctrl: exynos: Fix typos in gpio/wkup _irq_mask   Tomasz Figa
• [PATCH 3/6] pinctrl: exynos: Handle only unmasked wakeup interrupts   Tomasz Figa
• [PATCH 4/6] pinctrl: exynos: Mark exynos_irq_demux_eint as inline   Tomasz Figa
• [PATCH 5/6] pinctrl: exynos: Correct the detection of wakeup-eint node   Tomasz Figa
• [PATCH 6/6] pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data   Tomasz Figa
• [RFC 0/6] pinctrl: samsung: Remove static platform-specific data   Tomasz Figa
• [RFC 1/6] pinctrl: exynos: Parse wakeup-eint parameters from DT   Tomasz Figa
• [RFC 2/6] pinctrl: samsung: Parse pin banks from DT   Tomasz Figa
• [RFC 3/6] pinctrl: exynos: Remove static platform-specific data   Tomasz Figa
• [RFC 4/6] pinctrl: samsung: Parse bank-specific eint offset from DT   Tomasz Figa
• [RFC 5/6] ARM: dts: exynos4210: Remove legacy gpio nodes   Tomasz Figa
• [RFC 6/6] ARM: dts: exynos4210: Add platform-specific descriptions for pin controllers   Tomasz Figa
• [PATCH 7/6] pinctrl: exynos: Fix wakeup IRQ domain registration check   Tomasz Figa
• [PATCH 0/6] pinctrl: samsung: Various fixes   Tomasz Figa
• [RFC PATCH 0/6] pinctrl: samsung: Convert the driver to use per-bank GPIO and interrupt specifiers   Tomasz Figa
• [RFC PATCH 1/6] pinctrl: samsung: Hold OF node of pin bank in bank struct   Tomasz Figa
• [RFC PATCH 2/6] pinctrl: samsung: Hold pointer to driver data in bank struct   Tomasz Figa
• [RFC PATCH 3/6] pinctrl: exynos: Use one IRQ domain per pin bank   Tomasz Figa
• [RFC PATCH 4/6] pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank   Tomasz Figa
• [RFC PATCH 5/6] pinctrl: samsung: Use one GPIO chip per pin bank   Tomasz Figa
• [RFC PATCH 6/6] ARM: dts: exynos4210: Update pin bank nodes to reflect per-bank GPIO chips and IRQ domains   Tomasz Figa
• [RFC 0/6] pinctrl: samsung: Remove static platform-specific data   Tomasz Figa
• [RFC 6/6] ARM: dts: exynos4210: Add platform-specific descriptions for pin controllers   Tomasz Figa
• [PATCH 2/5] ARM: Add interface for registering and calling firmware-specific operations   Tomasz Figa
• [PATCH v2 0/6] ARM: EXYNOS: Add secure firmware support   Tomasz Figa
• [PATCH 1/6] ARM: Add interface for registering and calling firmware-specific operations   Tomasz Figa
• [PATCH 2/6] ARM: EXYNOS: Add support for secure monitor calls   Tomasz Figa
• [PATCH 3/6] ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412   Tomasz Figa
• [PATCH 4/6] ARM: EXYNOS: Add IO mapping for non-secure SYSRAM.   Tomasz Figa
• [PATCH 5/6] ARM: EXYNOS: Add support for Exynos secure firmware   Tomasz Figa
• [PATCH 6/6] ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up   Tomasz Figa
• [PATCH 4/5] ARM: EXYNOS: Add support for Exynos secure firmware   Tomasz Figa
• [RFC 6/6] ARM: dts: exynos4210: Add platform-specific descriptions for pin controllers   Tomasz Figa
• [RFC PATCH 0/6] pinctrl: samsung: Convert the driver to use per-bank GPIO and interrupt specifiers   Tomasz Figa
• [RFC 6/6] ARM: dts: exynos4210: Add platform-specific descriptions for pin controllers   Tomasz Figa
• [RFC 6/6] ARM: dts: exynos4210: Add platform-specific descriptions for pin controllers   Tomasz Figa
• [RFC 6/6] ARM: dts: exynos4210: Add platform-specific descriptions for pin controllers   Tomasz Figa
• [PATCH V2 3/3] ARM: EXYNOS: Add drm-device node to the dtsi file   Tomasz Figa
• [RFC PATCH 00/16] pinctrl: samsung: Usability and extensibiltiy improvements   Tomasz Figa
• [RFC PATCH 01/16] pinctrl: exynos: Parse wakeup-eint parameters from DT   Tomasz Figa
• [RFC PATCH 02/16] pinctrl: samsung: Detect and handle unsupported configuration types   Tomasz Figa
• [RFC PATCH 03/16] pinctrl: samsung: Parse pin banks from DT   Tomasz Figa
• [RFC PATCH 04/16] pinctrl: exynos: Remove static platform-specific data   Tomasz Figa
• [RFC PATCH 05/16] pinctrl: samsung: Parse bank-specific eint offset from DT   Tomasz Figa
• [RFC PATCH 06/16] pinctrl: samsung: Hold OF node of pin bank in bank struct   Tomasz Figa
• [RFC PATCH 07/16] pinctrl: samsung: Hold pointer to driver data in bank struct   Tomasz Figa
• [RFC PATCH 08/16] pinctrl: exynos: Use one IRQ domain per pin bank   Tomasz Figa
• [RFC PATCH 09/16] pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank   Tomasz Figa
• [RFC PATCH 10/16] pinctrl: samsung: Use one GPIO chip per pin bank   Tomasz Figa
• [RFC PATCH 11/16] pinctrl: samsung: Use per-bank IRQ domain for wake-up interrupts   Tomasz Figa
• [RFC PATCH 12/16] pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT   Tomasz Figa
• [RFC PATCH 13/16] pinctrl: samsung: Parse offsets of particular registers from DT   Tomasz Figa
• [RFC PATCH 14/16] ARM: dts: exynos4210: Remove legacy gpio nodes   Tomasz Figa
• [RFC PATCH 15/16] ARM: dts: exynos4210: Add platform-specific descriptions for pin controllers   Tomasz Figa
• [RFC PATCH 16/16] Documentation: Update samsung-pinctrl device tree bindings documentation   Tomasz Figa
• [PATCH 1/3] gpio: 74x164: Add support for the daisy-chaining   Miguel GAIO
• [PATCH] ARM: tegra: Fix data type for io address   Prashant Gaikwad
• [PATCH 1/2] ARM: tegra: fix overflow in tegra20_pll_clk_round_rate()   Prashant Gaikwad
• [PATCH v3 1/3] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Prashant Gaikwad
• [PATCH] ARM: Tegra: Add smp_twd clock for Tegra20   Prashant Gaikwad
• [PATCH v5 0/3] dmaengine: add support mmp-pdma   Zhangfei Gao
• [PATCH v5 1/3] dmaengine: mmp-pdma support   Zhangfei Gao
• [PATCH v5 2/3] dmaengine: mmp_tdma: add dt support   Zhangfei Gao
• [PATCH v5 3/3] ARM: dt: mmp-dma: add binding file   Zhangfei Gao
• [PATCH v5 3/3] ARM: dt: mmp-dma: add binding file   Zhangfei Gao
• [PATCH 07/16] ARM: pxa: move platform_data definitions   Jeff Garzik
• [PATCH 15/16] ARM: samsung: move platform_data definitions   Jeff Garzik
• [PATCH] arm: make FORCE_MAX_ZONEORDER configurable for TI AM33XX   Dejan Gačnik
• [PATCH] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Richard Genoud
• [PATCH 2/6] spi: atmel: add dmaengine and dt support   Richard Genoud
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Richard Genoud
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Richard Genoud
• Perf doesn't support coresight or it doesn't read the PMU registers on Pandaboard Rev.A2   Vanni Genua
• [PATCH] ARM: i.MX35: Implement camera and keypad clocks   Alex Gershgorin
• [PATCH 1/1] Fix segfault in DTC   David Gibson
• [PATCH 1/1] Fix segfault in DTC   David Gibson
• [PATCH 1/1] Fix segfault in DTC   David Gibson
• [RFC 1/3] ASoC: dmaengine: Don't use runtime private data for dmaengine data   Liam Girdwood
• [PATCH 0/7] Add support for Exynos5 ISP SPI ports   Simon Glass
• [PATCH 1/7] PM / Domains: add generic function 'pm_genpd_of_add_device_by_name'   Simon Glass
• [PATCH 2/7] spi: s3c64xx: Fix enum dma_data_direction warning   Simon Glass
• [PATCH 3/7] spi: s3c64xx: Add support for ISP SPI ports   Simon Glass
• [PATCH 4/7] spi: s3c64xx: Use jiffies instead of loops for timeout   Simon Glass
• [PATCH 5/7] spi: s3c64xx: Allow use with SPI ports without dma   Simon Glass
• [PATCH 6/7] spi: s3c64xx: Tidy up SPI chip select handling   Simon Glass
• [PATCH 7/7] spi: s3c64xx: Write to PACKET_CNT after reset   Simon Glass
• [PATCH] ARM: OMAP: remove unused hwmod function prototypes   Igor Grinberg
• OMAP baseline test results for v3.6-rc4   Igor Grinberg
• [PATCH 07/16] ARM: pxa: move platform_data definitions   Igor Grinberg
• ARM: OMAP: fix new sparse warnings   Igor Grinberg
• OMAP baseline test results for v3.6-rc7   Igor Grinberg
• [PATCH v2 00/11] chipidea/imx: add otg support and some bug fix   Michael Grzeschik
• sata_mv hangs up while probing on LaCie Kirkwood boards   Simon Guinot
• [PATCH v4 0/5] ARM: topology: set the capacity of each cores for big.LITTLE   Vincent Guittot
• [PATCH v4 0/5] ARM: topology: set the capacity of each cores for big.LITTLE   Vincent Guittot
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Jason Gunthorpe
• [PATCH] [ARM] Build failure CONFIG_ARCH_KIRKWOOD_DT relies on CACHE_FEROCEON_L2   Jason Gunthorpe
• [PATCH 1/6] gpio/mxs: adopt irq_domain support for mxs gpio driver   Shawn Guo
• [PATCH v2 0/9] Add device tree support for on-chip SRAM   Shawn Guo
• [PATCH v2 5/9] genalloc: add a global pool list, allow to find pools by phys address   Shawn Guo
• [PATCH v2 6/9] misc: Generic on-chip SRAM allocation driver   Shawn Guo
• [PATCH 1/2] ARM: dts: mxs: Add alternative I2C muxing options for imx28   Shawn Guo
• [PATCH v4 1/7] mfd: add syscon driver based on regmap   Shawn Guo
• [PATCH] kernel/sys.c: call disable_nonboot_cpus in kernel_restart   Shawn Guo
• [PATCHv2] ARM: dts: mxs: Enable USB1 Host on the CFA-10049 expansion board   Shawn Guo
• [PATCHv2 1/3] ARM: dts: mxs: Add missing address and size cells in SSP* nodes   Shawn Guo
• [PATCHv2 2/3] ARM: dts: mxs Add additionnal muxing options for SSP3   Shawn Guo
• [PATCH v3 0/4] Add device tree support for on-chip SRAM   Shawn Guo
• [PATCH v5 3/4] regulator: anatop-regulator: convert to use syscon to access anatop register   Shawn Guo
• [PATCH v2 1/4] [RFC] clk: new locking scheme for reentrancy   Shawn Guo
• [PATCH] kernel/sys.c: call disable_nonboot_cpus in kernel_restart   Shawn Guo
• [PATCH v3 3/3] cpufreq: Add a generic cpufreq-cpu0 driver   Shawn Guo
• [PATCH] ARM: mx28evk: Add I2C EEPROM support   Shawn Guo
• [PATCH] mxs/dma: Enlarge the CCW descriptor area to 4 pages   Shawn Guo
• [PATCH] mxs/dma: Enlarge the CCW descriptor area to 4 pages   Shawn Guo
• [PATCH] arm: mxs: Fix MMC WP pin being inverted   Shawn Guo
• [PATCHv3 1/2] ARM: dts: mxs: Add missing address and size cells in SSP nodes   Shawn Guo
• [PATCHv3 2/2] dts: mxs: spi: Add SSP3 to the 10049 board   Shawn Guo
• [PATCH] arm: mxs: Fix MMC WP pin being inverted   Shawn Guo
• RCU warning during UBI file system mount   Shawn Guo
• [PATCH] ARM: dts: m28evk: Fix MMC WP pin being inverted   Shawn Guo
• [PATCH v3 2/4] misc: Generic on-chip SRAM allocation driver   Shawn Guo
• [PATCH] arm: mxs: Fix MMC WP pin being inverted   Shawn Guo
• [PATCH v6 0/4] add syscon driver based on regmap for general registers access   Shawn Guo
• [PATCH v3 3/3] cpufreq: Add a generic cpufreq-cpu0 driver   Shawn Guo
• [PATCH v4] cpufreq: Add a generic cpufreq-cpu0 driver   Shawn Guo
• [PATCH] cpufreq: OMAP: remove redundant loops_per_jiffy code   Shawn Guo
• [PATCH v3 3/3] cpufreq: Add a generic cpufreq-cpu0 driver   Shawn Guo
• [PATCH] cpufreq: OMAP: remove redundant loops_per_jiffy code   Shawn Guo
• [PATCH RFC] clk: use spinlock for clk_get_rate   Shawn Guo
• [PATCH v2] pwm i.MX: add devicetree support   Shawn Guo
• [PATCH RFC] clk: use spinlock for clk_get_rate   Shawn Guo
• [PATCH v2 1/4] clk: add of_clk_src_onecell_get() support   Shawn Guo
• [PATCH] cpufreq: OMAP: remove redundant loops_per_jiffy code   Shawn Guo
• mxs: mmc: Problems resetting first SSP/MMC module upon boot   Shawn Guo
• [PATCH] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp   Shawn Guo
• [PATCH] cpufreq: add helper function cpufreq_set_target()   Shawn Guo
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Shawn Guo
• [PATCH 1/2] serial: mxs-auart: fix the wrong setting order   Shawn Guo
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Shawn Guo
• [PATCH 2/2] serial: mxs-auart: put the device in mxs_auart_probe()   Shawn Guo
• [PATCH v3 1/3] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Shawn Guo
• [PATCH] serial: mxs-auart: put the device when exit or error   Shawn Guo
• mxs: mmc: Problems resetting first SSP/MMC module upon boot   Shawn Guo
• Tracking down suspend/resume ext3/mmc issues on imx233   Shawn Guo
• [PATCH RFC] clk: use spinlock for clk_get_rate   Shawn Guo
• [PATCH] ARM: smp_twd: reprogram twd based on clk notifier   Shawn Guo
• [PATCH] ARM: smp_twd: reprogram twd based on clk notifier   Shawn Guo
• [PATCH v3 1/3] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Shawn Guo
• [PATCH 5/7] gpio: 74x164: Add support for the daisy-chaining   Shawn Guo
• [PATCH 7/7] ARM: dts: cfa10049: Add the 74HC595 gpio expanders   Shawn Guo
• [PATCH] cpufreq: add helper function cpufreq_set_target()   Shawn Guo
• [PATCH] mmc: mxs-mmc: implement broken-cd   Shawn Guo
• [PATCH v2 1/4] clk: add of_clk_src_onecell_get() support   Shawn Guo
• [PATCH] mmc: mxs-mmc: implement broken-cd   Shawn Guo
• [PATCH v2 1/4] clk: add of_clk_src_onecell_get() support   Shawn Guo
• [PATCH] cpufreq: add helper function cpufreq_set_target()   Shawn Guo
• [PATCH 4/4] efikamx: remove Efika MX-specific CHRGVBUS hack from the USB driver   Shawn Guo
• [GIT PULL 0/4] mxs changes for 3.7   Shawn Guo
• [GIT PULL 1/4] mxs device tree changes for 3.7   Shawn Guo
• [GIT PULL 2/4] mxs sparse-irq support   Shawn Guo
• [GIT PULL 3/4] mxs clk device tree lookup   Shawn Guo
• [GIT PULL 4/4] mxs defconfig update for 3.7   Shawn Guo
• [GIT PULL 3/4] mxs clk device tree lookup   Shawn Guo
• [GIT PULL 0/2] imx device tree changes for 3.7   Shawn Guo
• [GIT PULL 1/2] imx device tree changes   Shawn Guo
• [GIT PULL 2/2] imx6q clk device tree lookup   Shawn Guo
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Shawn Guo
• [PATCH] i.MX: remove legacy clock support   Shawn Guo
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Shawn Guo
• [PATCH 5/7] gpio: 74x164: Add support for the daisy-chaining   Shawn Guo
• [PATCH 3/3] ARM: dts: cfa10049: Add the 74HC595 gpio expanders   Shawn Guo
• [PATCH 2/2] ARM: tegra: cpu-tegra: explicitly manage re-parenting   Shawn Guo
• [PATCH] ARM: smp_twd: reprogram twd based on clk notifier   Shawn Guo
• [PATCH v9 10/13] ARM: SoC: convert imx6q to SoC descriptor   Shawn Guo
• [GIT PULL 2/4] mxs sparse-irq support   Shawn Guo
• [GIT PULL 4/4] mxs defconfig update for 3.7   Shawn Guo
• [GIT PULL 1/2] imx device tree changes   Shawn Guo
• [GIT PULL 2/2] imx6q clk device tree lookup   Shawn Guo
• [PATCH 04/16] ARM: imx: move platform_data definitions   Shawn Guo
• [PATCH 11/12] ARM: initial multiplatform support   Shawn Guo
• [PATCH 06/12] ARM: picoxcell: move debug macros to include/debug   Shawn Guo
• [PATCH v3 00/12] Initial multi-platform support   Shawn Guo
• [PATCH] ARM: highbank: call highbank_pm_init in .init_late hook   Shawn Guo
• [PATCH 00/34] i.MX multi-platform support   Shawn Guo
• [PATCH 01/34] ARM: imx: include board headers in the same folder   Shawn Guo
• [PATCH 02/34] ASoC: mx27vis: retrieve gpio numbers from platform_data   Shawn Guo
• [PATCH 03/34] ARM: imx: move iomux drivers and headers into mach-imx   Shawn Guo
• [PATCH 04/34] ARM: imx: remove unnecessary inclusion from device-imx*.h   Shawn Guo
• [PATCH 05/34] ARM: imx: move platform device code into mach-imx   Shawn Guo
• [PATCH 06/34] ARM: imx: merge plat-mxc into mach-imx   Shawn Guo
• [PATCH 07/34] ARM: imx: include common.h rather than mach/common.h   Shawn Guo
• [PATCH 08/34] ARM: imx: ARM: imx: include cpuidle.h rather than mach/cpuidle.h   Shawn Guo
• [PATCH 09/34] ARM: imx: include iim.h rather than mach/iim.h   Shawn Guo
• [PATCH 10/34] ARM: imx: include iram.h rather than mach/iram.h   Shawn Guo
• [PATCH 11/34] ARM: imx: include ulpi.h rather than mach/ulpi.h   Shawn Guo
• [PATCH 12/34] media: mx1_camera: remove the driver   Shawn Guo
• [PATCH 13/34] ARM: imx: remove mach/dma-mx1-mx2.h   Shawn Guo
• [PATCH 14/34] dma: ipu: rename mach/ipu.h to include/linux/dma/ipu-dma.h   Shawn Guo
• [PATCH 15/34] dma: imx-sdma: remove unneeded mach/hardware.h inclusion   Shawn Guo
• [PATCH 16/34] ASoC: imx-ssi: remove unneeded mach/hardware.h inclusion   Shawn Guo
• [PATCH 17/34] usb: ehci-mxc: remove unneeded mach/hardware.h inclusion   Shawn Guo
• [PATCH 18/34] video: mx3fb: remove unneeded mach/hardware.h inclusion   Shawn Guo
• [PATCH 19/34] watchdog: imx2_wdt: remove unneeded mach/hardware.h inclusion   Shawn Guo
• [PATCH 20/34] i2c: imx: remove mach/hardware.h inclusion   Shawn Guo
• [PATCH 21/34] mtd: mxc_nand: remove mach/hardware.h inclusion   Shawn Guo
• [PATCH 22/34] rtc: mxc_rtc: remove mach/hardware.h inclusion   Shawn Guo
• [PATCH 23/34] dma: imx-dma: use devm_kzalloc and devm_request_irq   Shawn Guo
• [PATCH 24/34] dma: imx-dma: retrieve MEM and IRQ from resources   Shawn Guo
• [PATCH 25/34] dma: imx-dma: remove mach/hardware.h inclusion   Shawn Guo
• [PATCH 26/34] media: mx2_camera: remove dead code in mx2_camera_add_device   Shawn Guo
• [PATCH 27/34] media: mx2_camera: use managed functions to clean up code   Shawn Guo
• [PATCH 28/34] media: mx2_camera: remove mach/hardware.h inclusion   Shawn Guo
• [PATCH 29/34] mmc: mxcmmc: remove mach/hardware.h inclusion   Shawn Guo
• [PATCH 30/34] video: imxfb: remove mach/hardware.h inclusion   Shawn Guo
• [PATCH 31/34] ARM: imx: move debug macros to include/debug   Shawn Guo
• [PATCH 32/34] ARM: imx: include hardware.h rather than mach/hardware.h   Shawn Guo
• [PATCH 33/34] ARM: imx: remove header file mach/irqs.h   Shawn Guo
• [PATCH 34/34] ARM: imx: enable multi-platform build   Shawn Guo
• [PATCH] ARM: dts: mxs: Add ethernetX to macX aliases   Shawn Guo
• [PATCH v2 04/15] dmaengine: Pass no_wakeup parameter via device_prep_dma_cyclic() callback   Shawn Guo
• [PATCH 1/2] ARM: dts: mx23: Add USB resources   Shawn Guo
• [PATCH 2/2] ARM: dts: imx23-olinuxino: Add USB host support   Shawn Guo
• [PATCH v7] ARM: dts: imx6q-sabrelite: add usbmisc device   Shawn Guo
• [PATCH v2 04/15] dmaengine: Pass no_wakeup parameter via device_prep_dma_cyclic() callback   Shawn Guo
• [PATCH 12/34] media: mx1_camera: remove the driver   Shawn Guo
• [PATCH 25/34] dma: imx-dma: remove mach/hardware.h inclusion   Shawn Guo
• [PATCH 26/34] media: mx2_camera: remove dead code in mx2_camera_add_device   Shawn Guo
• [PATCH 27/34] media: mx2_camera: use managed functions to clean up code   Shawn Guo
• [PATCH 25/34] dma: imx-dma: remove mach/hardware.h inclusion   Shawn Guo
• [alsa-devel] [PATCH 00/34] i.MX multi-platform support   Shawn Guo
• [PATCH 06/34] ARM: imx: merge plat-mxc into mach-imx   Shawn Guo
• [PATCH 33/34] ARM: imx: remove header file mach/irqs.h   Shawn Guo
• [PATCH 00/34] i.MX multi-platform support   Shawn Guo
• [PATCH] ARM i.MX25: Make timer irq work again   Shawn Guo
• [PATCH v3 04/15] dmaengine: Pass flags via device_prep_dma_cyclic() callback   Shawn Guo
• [PATCH v2 2/2] ARM: dts: imx23-olinuxino: Add USB host support   Shawn Guo
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Shawn Guo
• [PATCH] ARM: dts: imx6q-sabrelite: add usbotg pinctrl support   Shawn Guo
• [PATCH] ARM:IMX6Q:use pll2_pfd2_396m as the enfc_sel's parent   Shawn Guo
• [PATCH 6/6] staging: drm/imx: Add TODO   Shawn Guo
• [PATCH] ARM:IMX6Q:use pll2_pfd2_396m as the enfc_sel's parent   Shawn Guo
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Shawn Guo
• [PATCH 02/34] ASoC: mx27vis: retrieve gpio numbers from platform_data   Shawn Guo
• [PATCH 12/34] media: mx1_camera: remove the driver   Shawn Guo
• [PATCH 02/34] ASoC: mx27vis: retrieve gpio numbers from platform_data   Shawn Guo
• [PATCH v2 00/34] i.MX multi-platform support   Shawn Guo
• [PATCH v2 01/34] ARM: imx: include board headers in the same folder   Shawn Guo
• [PATCH v2 02/34] ARM: imx: move iomux drivers and headers into mach-imx   Shawn Guo
• [PATCH v2 03/34] ARM: imx: remove unnecessary inclusion from device-imx*.h   Shawn Guo
• [PATCH v2 04/34] ARM: imx: move platform device code into mach-imx   Shawn Guo
• [PATCH v2 05/34] ARM: imx: merge plat-mxc into mach-imx   Shawn Guo
• [PATCH v2 06/34] ARM: imx: include common.h rather than mach/common.h   Shawn Guo
• [PATCH v2 07/34] ARM: imx: ARM: imx: include cpuidle.h rather than mach/cpuidle.h   Shawn Guo
• [PATCH v2 08/34] ARM: imx: include iim.h rather than mach/iim.h   Shawn Guo
• [PATCH v2 09/34] ARM: imx: include iram.h rather than mach/iram.h   Shawn Guo
• [PATCH v2 10/34] ARM: imx: include ulpi.h rather than mach/ulpi.h   Shawn Guo
• [PATCH v2 11/34] media: mx1_camera: remove the driver   Shawn Guo
• [PATCH v2 12/34] ARM: imx: remove mach/dma-mx1-mx2.h   Shawn Guo
• [PATCH v2 13/34] dma: ipu: rename mach/ipu.h to include/linux/dma/ipu-dma.h   Shawn Guo
• [PATCH v2 14/34] dma: imx-sdma: remove unneeded mach/hardware.h inclusion   Shawn Guo
• [PATCH v2 15/34] ASoC: imx-ssi: remove unneeded mach/hardware.h inclusion   Shawn Guo
• [PATCH v2 16/34] usb: ehci-mxc: remove unneeded mach/hardware.h inclusion   Shawn Guo
• [PATCH v2 17/34] video: mx3fb: remove unneeded mach/hardware.h inclusion   Shawn Guo
• [PATCH v2 18/34] watchdog: imx2_wdt: remove unneeded mach/hardware.h inclusion   Shawn Guo
• [PATCH v2 19/34] i2c: imx: remove cpu_is_xxx by using platform_device_id   Shawn Guo
• [PATCH v2 20/34] mtd: mxc_nand: remove cpu_is_xxx by using platform_device_id   Shawn Guo
• [PATCH v2 21/34] rtc: mxc_rtc: remove cpu_is_xxx by using platform_device_id   Shawn Guo
• [PATCH v2 22/34] dma: imx-dma: use devm_kzalloc and devm_request_irq   Shawn Guo
• [PATCH v2 23/34] dma: imx-dma: retrieve MEM and IRQ from resources   Shawn Guo
• [PATCH v2 24/34] dma: imx-dma: remove cpu_is_xxx by using platform_device_id   Shawn Guo
• [PATCH v2 25/34] media: mx2_camera: remove dead code in mx2_camera_add_device   Shawn Guo
• [PATCH v2 26/34] media: mx2_camera: use managed functions to clean up code   Shawn Guo
• [PATCH v2 27/34] media: mx2_camera: remove cpu_is_xxx by using platform_device_id   Shawn Guo
• [PATCH v2 28/34] mmc: mxcmmc: remove cpu_is_xxx by using platform_device_id   Shawn Guo
• [PATCH v2 29/34] video: imxfb: remove cpu_is_xxx by using platform_device_id   Shawn Guo
• [PATCH v2 30/34] ARM: imx: move debug macros to include/debug   Shawn Guo
• [PATCH v2 31/34] ARM: imx: include hardware.h rather than mach/hardware.h   Shawn Guo
• [PATCH v2 32/34] ARM: imx: remove header file mach/irqs.h   Shawn Guo
• [PATCH v2 33/34] ARM: imx: call mxc_device_init() in soc specific function   Shawn Guo
• [PATCH v2 34/34] ARM: imx: enable multi-platform build   Shawn Guo
• [PATCH v2 00/34] i.MX multi-platform support   Shawn Guo
• [PATCH v2 00/34] i.MX multi-platform support   Shawn Guo
• [PATCH v2 11/34] media: mx1_camera: remove the driver   Shawn Guo
• [PATCH v2 00/34] i.MX multi-platform support   Shawn Guo
• [GIT PULL] mxs device tree changes for 3.7 (take 2)   Shawn Guo
• [GIT PULL] imx device tree changes for 3.7 (take 2)   Shawn Guo
• [PATCH] media: mx1_camera: mark the driver BROKEN   Shawn Guo
• [PATCH 25/34] dma: imx-dma: remove mach/hardware.h inclusion   Shawn Guo
• [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support   Shawn Guo
• [RFC PATCH v2 0/5] ARM: augment cache flushing API   Shawn Guo
• [GIT PULL] ARM initial multi-platform support   Shawn Guo
• [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support   Shawn Guo
• [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support   Shawn Guo
• [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support   Shawn Guo
• [PATCH] spi/imx: set the inactive state of the clock according to the clock polarity   Shawn Guo
• [PATCH] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Shawn Guo
• [PATCH v2] ARM: dts: imx28-evk: Use pinctrl for gpio-led   Shawn Guo
• [PATCH 1/2] ARM i.MX25: Add devicetree support   Shawn Guo
• [PATCH 2/2] ARM i.MX25: Add devicetree   Shawn Guo
• [PATCH 2/3] mmc: esdhc i.MX: Fix version register read   Shawn Guo
• [PATCH 3/3] mmc: esdhc i.MX: Support 8bit mode   Shawn Guo
• [PATCH] rtc: i.MX dryice: Add devicetree support   Shawn Guo
• [PATCH 3/3] mmc: esdhc i.MX: Support 8bit mode   Shawn Guo
• [PATCH 3/3] mmc: esdhc i.MX: Support 8bit mode   Shawn Guo
• [PATCH 1/2] ARM: dts: imx23-olinuxino: Remove unneeded "default-on"   Shawn Guo
• [PATCH 3/3] mmc: esdhc i.MX: Support 8bit mode   Shawn Guo
• [PATCH] ARM: mxs_defconfig: Improve USB related support   Shawn Guo
• [PATCH 3/3] mmc: esdhc i.MX: Support 8bit mode   Shawn Guo
• [PATCH] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Shawn Guo
• [PATCH v2] rtc: i.MX dryice: Add devicetree support   Shawn Guo
• [PATCH] ARM i.MX dtsi: Add default bus-width property for esdhc controller   Shawn Guo
• [PATCH V2] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Shawn Guo
• [PATCH V2] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Shawn Guo
• [PATCH V2] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Shawn Guo
• [PATCH v4 1/2] ARM: new cache maintenance api for iommu   Gupta, Ramesh
• [PATCH v4 2/2] OMAP:IOMMU:flush L1 and L2 caches   Gupta, Ramesh
• [PATCH v5 0/2] ARM: New cache API for iommu   Gupta, Ramesh
• [PATCH v5 1/2] ARM: new cache maintenance api for iommu   Gupta, Ramesh
• [PATCH v5 2/2] OMAP:IOMMU:flush L1 and L2 caches   Gupta, Ramesh
• [PATCH v5 2/2] OMAP:IOMMU:flush L1 and L2 caches   Gupta, Ramesh
• [PATCH v6 0/2] ARM: New cache API for iommu   Gupta, Ramesh
• [PATCH v6 1/2] ARM: new cache maintenance api for iommu   Gupta, Ramesh
• [PATCH v6 2/2] OMAP:IOMMU:flush L1 and L2 caches   Gupta, Ramesh
• [PATCH v6 0/2] ARM: New cache API for iommu   Gupta, Ramesh
• [PATCH] omap: remoteproc: set bootaddr support   Gutierrez, Juan
• [PATCH] mfd: Implement devicetree support for AB8500 fg   Rajanikanth H.V
• [PATCH] mfd: Implement devicetree support for AB8500 fg   Rajanikanth HV
• mfd: Implement devicetree support for AB8500 Btemp   Rajanikanth HV
• mfd: Implement devicetree support for AB8500 Btemp   Rajanikanth HV
• Implement devicetree support for AB8500 Btemp   Rajanikanth HV
• Implement devicetree support for AB8500 Btemp   Rajanikanth HV
• Implement devicetree support for AB8500 Btemp   Rajanikanth HV
• Implement devicetree support for AB8500 Btemp   Rajanikanth HV
• [PATCH] ARM: ixp4xx: move fixed mapping of internal devices into vmalloc region   Krzysztof Halasa
• [PATCH 09/24] ARM: ixp4xx: use __iomem pointers for MMIO   Krzysztof Halasa
• Another tree for "next"   Krzysztof Halasa
• [PATCH 09/24] ARM: ixp4xx: use __iomem pointers for MMIO   Krzysztof Halasa
• [PATCH 08+09/24] ARM: ixp4xx: use __iomem pointers for MMIO   Krzysztof Halasa
• My collection of IXP4xx patches for the next window   Krzysztof Halasa
• [PATCH 1/10] IXP4xx: Fix Goramo MultiLink platform compilation.   Krzysztof Halasa
• [PATCH 2/10] IXP4xx: Fix off-by-one bug in Goramo MultiLink platform.   Krzysztof Halasa
• [PATCH 3/10] IXP4xx: HW pseudo-random generator is available on IXP45x/46x only.   Krzysztof Halasa
• [PATCH 4/10] IXP4xx: ixp4xx_crypto driver requires Queue Manager and NPE drivers.   Krzysztof Halasa
• [PATCH 5/10] ARM: fix DMA-bounce code to allow sync from_device and to_device with bidirectional mappings.   Krzysztof Halasa
• [PATCH 6/10] IXP4xx: Remove time limit for PCI TRDY to enable use of slow devices.   Krzysztof Halasa
• [PATCH 7/10] WAN: Remove redundant HDLC info printed by IXP4xx HSS driver.   Krzysztof Halasa
• [PATCH 8/10] IXP4xx crypto: MOD_AES{128, 192, 256} already include key size.   Krzysztof Halasa
• [PATCH 9/10] IXP4xx: Always ioremap() Queue Manager MMIO region at boot.   Krzysztof Halasa
• [PATCH 10/10] IXP4xx: map CPU config registers within VMALLOC region.   Krzysztof Halasa
• [RFC 2/3] ARM: move udc_pxa2xx.h to linux/platform_data   Krzysztof Halasa
• ARM SoC tree, Was: Re: [PATCH 05/12] ARM: ixp4xx: use __iomem for MMIO   Krzysztof Halasa
• ARM SoC tree, Was: Re: [PATCH 05/12] ARM: ixp4xx: use __iomem for MMIO   Krzysztof Halasa
• ARM SoC tree, Was: Re: [PATCH 05/12] ARM: ixp4xx: use __iomem for MMIO   Krzysztof Halasa
• ARM SoC tree, Was: Re: [PATCH 05/12] ARM: ixp4xx: use __iomem for MMIO   Krzysztof Halasa
• [PATCH] ARM: EXYNOS5: Add bus clock and set parent clock for FIMD   Jingoo Han
• [PATCH 15/16] ARM: samsung: move platform_data definitions   Jingoo Han
• [PATCH] ARM: EXYNOS5: Add bus clock and set parent clock for FIMD   Jingoo Han
• [PATCH V2] ARM: EXYNOS5: Add bus clock and set parent clock for FIMD   Jingoo Han
• [PATCH V3] ARM: EXYNOS5: Add bus clock and set parent clock for FIMD   Jingoo Han
• [PATCH V4] ARM: EXYNOS5: Add bus clock and set parent clock for FIMD   Jingoo Han
• [PATCH V4] ARM: EXYNOS5: Add bus clock and set parent clock for FIMD   Jingoo Han
• [PATCH V5] ARM: EXYNOS5: Add bus clock for FIMD   Jingoo Han
• [PATCH 2/3] ARM: EXYNOS: add device tree based discovery support for FIMD   Jingoo Han
• [PATCH 1/3] ARM: EXYNOS5: Add fimd node to the exynos5250 dtsi file   Jingoo Han
• [PATCH 2/3] ARM: EXYNOS: add device tree based discovery support for FIMD   Jingoo Han
• [PATCH 1/4] clk: Provide option for clk_get_rate to issue hw for new rate   Ulf Hansson
• [PATCH RFC] clk: use spinlock for clk_get_rate   Ulf Hansson
• [PATCH] ARM: smp_twd: reprogram twd based on clk notifier   Ulf Hansson
• [PATCH 1/4] clk: Provide option for clk_get_rate to issue hw for new rate   Ulf Hansson
• [PATCH] ARM: smp_twd: reprogram twd based on clk notifier   Ulf Hansson
• [PATCH] ARM: smp_twd: reprogram twd based on clk notifier   Ulf Hansson
• [PATCH v2] ARM: smp_twd: reprogram twd based on clk notifier   Ulf Hansson
• [PATCH] i2c-nomadik: Fixup clock handling   Ulf Hansson
• [PATCH] rtc: kconfig: Fixup dependency for ab8500   Ulf Hansson
• [PATCH 0/3] clk: ux500: Set sdmmc clock to 100MHz   Ulf Hansson
• [PATCH 1/3] mfd: dbx500: Export prmcu_request_ape_opp_100_voltage   Ulf Hansson
• [PATCH 2/3] clk: ux500: Support prcmu ape opp voltage clock   Ulf Hansson
• [PATCH 3/3] clk: ux500: Update sdmmc clock to 100MHz for u8500   Ulf Hansson
• [PATCH 2/3] clk: ux500: Support prcmu ape opp voltage clock   Ulf Hansson
• [RESEND PATCH] rtc: kconfig: Fixup dependency for ab8500   Ulf Hansson
• [PATCH] spi/pl022: Simplify use of runtime pm   Ulf Hansson
• [PATCH 2/3] clk: ux500: Support prcmu ape opp voltage clock   Ulf Hansson
• [PATCH V2] spi/pl022: Simplify use of runtime pm   Ulf Hansson
• [PATCH 0/3] Fixup use of runtime pm   Ulf Hansson
• [PATCH 1/3] Revert "spi/pl022: fix spi-pl022 pm enable at probe"   Ulf Hansson
• [PATCH 2/3] Revert "spi/pl022: enable runtime PM"   Ulf Hansson
• [PATCH 3/3] spi: spi-pl022: Minor simplification for runtime pm   Ulf Hansson
• [PATCH 0/3] Fixup use of runtime pm   Ulf Hansson
• [PATCH 0/4] cpufreq: db8500: Use platform data to provide cpufreq table   Ulf Hansson
• [PATCH 1/4] ARM: ux500: Remove cpufreq platform device   Ulf Hansson
• [PATCH 2/4] mfd: db8500: Provide cpufreq table as platform data   Ulf Hansson
• [PATCH 3/4] cpufreq: db8500: Register as a platform driver   Ulf Hansson
• [PATCH 4/4] cpufreq: db8500: Fetch cpufreq table from platform data   Ulf Hansson
• [PATCH 06/11] clk: Common clocks implementation for Versatile Express   Ryan Harkin
• [RFC PATCH 0/3] amba-clcd: add device tree support   Ryan Harkin
• [RFC PATCH 1/3] amba-clcd: Add Device Tree support to amba-clcd driver   Ryan Harkin
• [RFC PATCH 2/3] ARM: vexpress: Add device tree support for CLCD driver   Ryan Harkin
• [RFC PATCH 3/3] ARM: vexpress: configure CLCD driver device tree support for A9 CoreTile   Ryan Harkin
• [RFC PATCH 1/3] amba-clcd: Add Device Tree support to amba-clcd driver   Ryan Harkin
• [RFC PATCH 1/3] amba-clcd: Add Device Tree support to amba-clcd driver   Ryan Harkin
• [GIT PULL] SPEAr pinctrl updates for v-3.5   Shiraz Hashim
• mxc_nand.c on mach-imx/imx53   Sascha Hauer
• [PATCH v2] pwm i.MX: add devicetree support   Sascha Hauer
• [PATCH 1/8] pwm i.MX: factor out SoC specific functions   Sascha Hauer
• [PATCH 2/8] pwm i.MX: remove unnecessary if in pwm_[en|dis]able   Sascha Hauer
• [PATCH 3/8] pwm i.MX: add functions to enable/disable pwm.   Sascha Hauer
• [PATCH 4/8] pwm i.MX: Use module_platform_driver   Sascha Hauer
• [PATCH 5/8] pwm i.MX: add devicetree support   Sascha Hauer
• [PATCH 6/8] pwm i.MX: use per clock unconditionally   Sascha Hauer
• [PATCH 7/8] pwm i.MX: fix clock lookup   Sascha Hauer
• [PATCH 8/8] ARM i.MX53: Add pwm support   Sascha Hauer
• [PATCH 5/8] pwm i.MX: add devicetree support   Sascha Hauer
• [PATCH 7/8] pwm i.MX: fix clock lookup   Sascha Hauer
• [PATCH] ARM: i.MX35: Implement camera and keypad clocks   Sascha Hauer
• [PATCH v3] pwm i.MX: add devicetree support   Sascha Hauer
• [PATCH 1/9] pwm i.MX: factor out SoC specific functions   Sascha Hauer
• [PATCH 2/9] pwm i.MX: remove unnecessary if in pwm_[en|dis]able   Sascha Hauer
• [PATCH 3/9] pwm i.MX: add functions to enable/disable pwm.   Sascha Hauer
• [PATCH 4/9] pwm i.MX: Use module_platform_driver   Sascha Hauer
• [PATCH 5/9] pwm i.MX: add devicetree support   Sascha Hauer
• [PATCH 6/9] pwm i.MX: use per clock unconditionally   Sascha Hauer
• [PATCH 7/9] pwm i.MX: fix clock lookup   Sascha Hauer
• [PATCH 8/9] ARM i.MX53: Add pwm support   Sascha Hauer
• [PATCH 9/9] ARM i.MX: remove PWM platform support   Sascha Hauer
• [PATCH 7/9] pwm i.MX: fix clock lookup   Sascha Hauer
• [PATCH 7/9] pwm i.MX: fix clock lookup   Sascha Hauer
• [PATCH v3] pwm i.MX: add devicetree support   Sascha Hauer
• [PATCH 8/9] ARM i.MX53: Add pwms to dtsi   Sascha Hauer
• [PATCH v4] pwm: i.MX: add devicetree support   Sascha Hauer
• [PATCH 1/7] pwm: i.MX: factor out SoC specific functions   Sascha Hauer
• [PATCH 2/7] pwm: i.MX: remove unnecessary if in pwm_[en|dis]able   Sascha Hauer
• [PATCH 3/7] pwm: i.MX: add functions to enable/disable pwm.   Sascha Hauer
• [PATCH 4/7] pwm: i.MX: Use module_platform_driver   Sascha Hauer
• [PATCH 5/7] pwm: i.MX: add devicetree support   Sascha Hauer
• [PATCH 6/7] pwm: i.MX: use per clock unconditionally   Sascha Hauer
• [PATCH 7/7] pwm: i.MX: fix clock lookup   Sascha Hauer
• [PATCH] i.MX: remove legacy clock support   Sascha Hauer
• [PATCH 1/2] ARM: i.MX clk pllv1: move mxc_decode_pll code to its user   Sascha Hauer
• [PATCH 2/2] ARM: i.MX remove last leftovers from legacy clock support   Sascha Hauer
• [PATCH 1/1] mxc_nand : allow swapping the Bad block Indicator for NFC v1.   Sascha Hauer
• [PATCH 1/1] mxc_nand : allow swapping the Bad block Indicator for NFC v1.   Sascha Hauer
• GCC 4.6.x miscompiling arm-linux?   Sascha Hauer
• [PATCH v2] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Sascha Hauer
• [GIT PULL] i.MX Fixes   Sascha Hauer
• [PATCH v2] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Sascha Hauer
• [PATCH 06/16] ARM: netx: move platform_data definitions   Sascha Hauer
• [PATCH 04/16] ARM: imx: move platform_data definitions   Sascha Hauer
• [PATCH 5/7] pwm: i.MX: add devicetree support   Sascha Hauer
• [PATCH] ARM i.MX53 clk: Fix ldb parent clocks   Sascha Hauer
• [PATCH] Add i.MX IPUv3 base/KMS driver to the staging tree   Sascha Hauer
• [PATCH 1/6] staging: drm/imx: Add i.MX drm core support   Sascha Hauer
• [PATCH 2/6] staging: drm/imx: Add parallel display support   Sascha Hauer
• [PATCH 3/6] staging: drm/imx: add i.MX IPUv3 base driver   Sascha Hauer
• [PATCH 4/6] staging: drm/imx: Add i.MX IPUv3 crtc support   Sascha Hauer
• [PATCH 5/6] staging: drm/imx: Add devicetree binding documentation   Sascha Hauer
• [PATCH 6/6] staging: drm/imx: Add TODO   Sascha Hauer
• [PATCH 1/6] staging: drm/imx: Add i.MX drm core support   Sascha Hauer
• [GIT PULL] i.MX patches for -next   Sascha Hauer
• [GIT PULL 1/5] ARM i.MX board updates   Sascha Hauer
• [GIT PULL 2/5] ARM i.MX cleanup patches   Sascha Hauer
• [GIT PULL 3/5] ARM i.MX defconfig updates   Sascha Hauer
• [GIT PULL 4/5] ARM: i.MX: Fix SSI clock associations for i.MX25/i.MX35   Sascha Hauer
• [GIT PULL 5/5] ARM i.MX SoC updates   Sascha Hauer
• [PATCH 3/6] staging: drm/imx: add i.MX IPUv3 base driver   Sascha Hauer
• [PATCH 05/24] ARM: imx: use __iomem pointers for MMIO   Sascha Hauer
• [PATCH 00/34] i.MX multi-platform support   Sascha Hauer
• [PATCH 25/34] dma: imx-dma: remove mach/hardware.h inclusion   Sascha Hauer
• [PATCH 00/34] i.MX multi-platform support   Sascha Hauer
• [PATCH 5/7] pwm: i.MX: add devicetree support   Sascha Hauer
• [PATCH] ARM i.MX25: Make timer irq work again   Sascha Hauer
• [GIT PULL] i.MX fixes for 3.6   Sascha Hauer
• [PATCH 5/6] staging: drm/imx: Add devicetree binding documentation   Sascha Hauer
• [PATCH 6/6] staging: drm/imx: Add TODO   Sascha Hauer
• [PATCH] ARM:IMX6Q:use pll2_pfd2_396m as the enfc_sel's parent   Sascha Hauer
• [PATCH] Add i.MX IPUv3 base/KMS driver to the staging tree   Sascha Hauer
• [PATCH 1/6] staging: drm/imx: Add i.MX drm core support   Sascha Hauer
• [PATCH 2/6] staging: drm/imx: Add parallel display support   Sascha Hauer
• [PATCH 3/6] staging: drm/imx: add i.MX IPUv3 base driver   Sascha Hauer
• [PATCH 4/6] staging: drm/imx: Add i.MX IPUv3 crtc support   Sascha Hauer
• [PATCH 5/6] staging: drm/imx: Add devicetree binding documentation   Sascha Hauer
• [PATCH 6/6] staging: drm/imx: Add TODO   Sascha Hauer
• [RFC PATCH 1/3] amba-clcd: Add Device Tree support to amba-clcd driver   Sascha Hauer
• [PATCH 4/6] staging: drm/imx: Add i.MX IPUv3 crtc support   Sascha Hauer
• [PATCH] i.MX25 devicetree support   Sascha Hauer
• [PATCH 1/2] ARM i.MX25: Add devicetree support   Sascha Hauer
• [PATCH 2/2] ARM i.MX25: Add devicetree   Sascha Hauer
• [PATCH] mmc: sdhci / i.MX esdhc buswidth patches   Sascha Hauer
• [PATCH 1/3] mmc: sdhci: rename platform_8bit_width to platform_bus_width   Sascha Hauer
• [PATCH 2/3] mmc: esdhc i.MX: Fix version register read   Sascha Hauer
• [PATCH 3/3] mmc: esdhc i.MX: Support 8bit mode   Sascha Hauer
• [PATCH] rtc: i.MX dryice: Add devicetree support   Sascha Hauer
• [PATCH 1/3] mmc: sdhci: rename platform_8bit_width to platform_bus_width   Sascha Hauer
• [PATCH v2] ARM i.MX25: Add devicetree support   Sascha Hauer
• [PATCH 1/2] ARM i.MX25: Add devicetree support   Sascha Hauer
• [PATCH 2/2] ARM i.MX25: Add devicetree   Sascha Hauer
• [PATCH 3/3] mmc: esdhc i.MX: Support 8bit mode   Sascha Hauer
• [PATCH 3/3] mmc: esdhc i.MX: Support 8bit mode   Sascha Hauer
• [PATCH 3/3] mmc: esdhc i.MX: Support 8bit mode   Sascha Hauer
• [PATCH 3/3] mmc: esdhc i.MX: Support 8bit mode   Sascha Hauer
• [PATCH] ARM i.MX dtsi: Add default bus-width property for esdhc controller   Sascha Hauer
• [PATCH v2] rtc: i.MX dryice: Add devicetree support   Sascha Hauer
• [PATCH v3] ARM: i.MX35: Add kernel oftree support   Sascha Hauer
• Using ipuv3 driver with device tree   Sascha Hauer
• Using ipuv3 driver with device tree   Sascha Hauer
• [PATCH V3] ASoC: Davinci: machine: Add device tree binding   Hebbar, Gururaja
• [PATCH 1/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Hebbar, Gururaja
• [PATCH V2] ASoC: Davinci: McASP: add support new McASP IP Variant   Hebbar, Gururaja
• [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Hebbar, Gururaja
• [PATCH V3] ASoC: Davinci: machine: Add device tree binding   Hebbar, Gururaja
• [PATCH 02/16] ARM: davinci: move platform_data definitions   Hebbar, Gururaja
• [PATCH 02/16] ARM: davinci: move platform_data definitions   Hebbar, Gururaja
• [RFC PATCH 01/13] ARM: davinci: move private EDMA API to arm/common   Hebbar, Gururaja
• [RFC PATCH 00/13] DMA Engine support for AM33xx   Hebbar, Gururaja
• [RFC PATCH 05/13] dma: Add TI EDMA device tree binding   Hebbar, Gururaja
• [RFC PATCH 03/13] ARM: edma: add DT and runtime PM support for AM335x   Hebbar, Gururaja
• [RFC PATCH 01/13] ARM: davinci: move private EDMA API to arm/common   Hebbar, Gururaja
• [RFC PATCH 01/13] ARM: davinci: move private EDMA API to arm/common   Hebbar, Gururaja
• [RFC PATCH 00/13] DMA Engine support for AM33xx   Hebbar, Gururaja
• [RFC PATCH 00/13] DMA Engine support for AM33xx   Hebbar, Gururaja
• 8bit i2c register address   Hebbar, Gururaja
• [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Hebbar, Gururaja
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Bjorn Helgaas
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Bjorn Helgaas
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Bjorn Helgaas
• [PATCH 1/2] PCI: Annotate pci_fixup_irqs with __devinit   Bjorn Helgaas
• [PATCH 2/2] PCI: Provide a default pcibios_update_irq()   Bjorn Helgaas
• [PATCH 2/2] PCI: Provide a default pcibios_update_irq()   Bjorn Helgaas
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Bjorn Helgaas
• [PATCH 1/2] ARM: pci: Keep pci_common_init() around after init   Bjorn Helgaas
• [PATCH 2/2] ARM: pci: Allow passing per-controller private data   Bjorn Helgaas
• [PATCH 2/2] ARM: pci: Allow passing per-controller private data   Bjorn Helgaas
• [PATCH v2 1/2] PCI: Keep pci_fixup_irqs() around after init   Bjorn Helgaas
• [PATCH v2 2/2] PCI: Provide a default pcibios_update_irq()   Bjorn Helgaas
• [PATCH] clk: Make the generic clock API available by default   Benjamin Herrenschmidt
• [PATCH 13/25] macintosh/mediabay: add a const qualifier   Benjamin Herrenschmidt
• [PATCH 13/25] macintosh/mediabay: add a const qualifier   Benjamin Herrenschmidt
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Benjamin Herrenschmidt
• [PATCH 13/25] macintosh/mediabay: add a const qualifier   Benjamin Herrenschmidt
• [PATCH 0/4] Fix PROT_NONE page permissions when !CPU_USE_DOMAINS   Benjamin Herrenschmidt
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Rob Herring
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Rob Herring
• [PATCH 02/10] gpio: pxa: add explicit includes for cpu_is_X macros   Rob Herring
• [PATCH v2] ARM: initial multiplatform support   Rob Herring
• linux-next: manual merge of the arm-soc tree with the arm-current tree   Rob Herring
• [PATCH 10/11] ARM: vexpress: Add config bus components and clocks to DTs   Rob Herring
• [PATCH 10/11] ARM: vexpress: Add config bus components and clocks to DTs   Rob Herring
• [PATCH 10/11] ARM: vexpress: Add config bus components and clocks to DTs   Rob Herring
• [PATCH 1/3] ARM: move debug macros to common location   Rob Herring
• [PATCH v2] ARM: initial multiplatform support   Rob Herring
• [PATCH v2] ARM: initial multiplatform support   Rob Herring
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Rob Herring
• [RFC RESEND 1/4] arm/dts: OMAP: Add timer nodes   Rob Herring
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Rob Herring
• [PATCH 0/1] clk: add DT fixed-factor-clock binding support   Rob Herring
• [PATCH v2 0/6] Make mach/gpio.h optional   Rob Herring
• [PATCH v2 1/6] usb: pxa27x_udc: remove IRQ_USB define   Rob Herring
• [PATCH v2 2/6] net: pxaficp_ir: add irq resources   Rob Herring
• [PATCH v2 3/6] ARM: pxa: use gpio_to_irq for sharppm_sl   Rob Herring
• [PATCH v2 4/6] ARM: shmobile: move custom gpio functions to sh-gpio.h   Rob Herring
• [PATCH v2 5/6] ARM: orion: move custom gpio functions to orion-gpio.h   Rob Herring
• [PATCH v2 6/6] ARM: make mach/gpio.h headers optional   Rob Herring
• [PATCH v3 00/12] Initial multi-platform support   Rob Herring
• [PATCH 01/12] ARM: move debug macros to common location   Rob Herring
• [PATCH 02/12] ARM: highbank: move debug macros to include/debug   Rob Herring
• [PATCH 03/12] ARM: vexpress: move debug macros to include/debug   Rob Herring
• [PATCH 04/12] ARM: mvebu: move debug macros to include/debug   Rob Herring
• [PATCH 05/12] ARM: socfpga: move debug macros to include/debug   Rob Herring
• [PATCH 06/12] ARM: picoxcell: move debug macros to include/debug   Rob Herring
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Rob Herring
• [PATCH 08/12] ARM: picoxcell: remove dependency on mach/* headers   Rob Herring
• [PATCH 09/12] ARM: vexpress: remove dependency on mach/* headers   Rob Herring
• [PATCH 10/12] ARM: mvebu: move armada-370-xp.h in mach dir   Rob Herring
• [PATCH 11/12] ARM: initial multiplatform support   Rob Herring
• [PATCH 12/12] ARM: vexpress: convert to multi-platform   Rob Herring
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Rob Herring
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Rob Herring
• [PATCH v3 08/10] of/address: Handle #address-cells > 2 specially   Rob Herring
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Rob Herring
• [RFC PATCH] ARM: l2x0: avoid spinlock for sync op on pl310   Rob Herring
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Rob Herring
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Rob Herring
• [PATCH v2] ARM: move all dtb targets out of Makefile.boot   Rob Herring
• [PATCH v9 09/13] ARM: SoC: convert highbank to SoC descriptor   Rob Herring
• [PATCH v2 5/6] ARM: orion: move custom gpio functions to orion-gpio.h   Rob Herring
• [PATCH 11/12] ARM: initial multiplatform support   Rob Herring
• [PATCH] of: specify initrd location using 64-bit   Rob Herring
• [PATCH v2 5/6] ARM: orion: move custom gpio functions to orion-gpio.h   Rob Herring
• [PATCH] of: specify initrd location using 64-bit   Rob Herring
• [PATCH] of: specify initrd location using 64-bit   Rob Herring
• [PATCH v3 06/25] docs: Xen ARM DT bindings   Rob Herring
• [PATCH] staging: ste_rmi4: remove gpio.h include   Rob Herring
• [PATCH] staging: ste_rmi4: remove gpio.h include   Rob Herring
• [PATCH 06/12] ARM: picoxcell: move debug macros to include/debug   Rob Herring
• [PATCH v3 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Rob Herring
• [PATCH v3 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Rob Herring
• [PATCH] of: specify initrd location using 64-bit   Rob Herring
• [PATCH] staging: ste_rmi4: remove gpio.h include   Rob Herring
• [PATCH v3 00/12] Initial multi-platform support   Rob Herring
• [GIT PULL] ARM initial multi-platform support   Rob Herring
• [PATCH] ARM: highbank: call highbank_pm_init in .init_late hook   Rob Herring
• [PATCH v4 06/24] docs: Xen ARM DT bindings   Rob Herring
• [PATCH v2] ARM: l2x0: make background cache ops optional for clean and flush range   Rob Herring
• [PATCH] ARM: highbank: call highbank_pm_init from .init_machine   Rob Herring
• [PATCH v2] ARM: l2x0: make background cache ops optional for clean and flush range   Rob Herring
• [PATCH v2] ARM: l2x0: make background cache ops optional for clean and flush range   Rob Herring
• [PATCH v2] ARM: l2x0: make background cache ops optional for clean and flush range   Rob Herring
• [PATCH v5 06/17] docs: Xen ARM DT bindings   Rob Herring
• [PATCH v2] ARM: l2x0: make background cache ops optional for clean and flush range   Rob Herring
• [PATCH v2] ARM: l2x0: make background cache ops optional for clean and flush range   Rob Herring
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Rob Herring
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Rob Herring
• [PATCH V2 7/7] ARM: OMAP: Add DT support for timer driver   Rob Herring
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Rob Herring
• [PATCHv4 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices   Rob Herring
• [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Rob Herring
• [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy   Rob Herring
• [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Rob Herring
• [PATCH] ARM: GIC: dont warn on pre-allocated IRQ descs   Rob Herring
• [PATCH] ARM: GIC: dont warn on pre-allocated IRQ descs   Rob Herring
• [PATCH V2 7/7] ARM: OMAP: Add DT support for timer driver   Rob Herring
• [PATCH] pinctrl/nomadik: allocate IRQ descriptors dynamically   Rob Herring
• [PATCH 3/4] pinctrl/nomadik: use simple or linear IRQ domain   Rob Herring
• [PATCH 2/4] irqdomain: augment add_simple() to allocate descs   Rob Herring
• [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy   Rob Herring
• [PATCH] ARM: mvebu: fix build breaks from multi-platform conversion   Rob Herring
• [PATCH] ARM: add v7 multi-platform defconfig   Rob Herring
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Sebastian Hesselbarth
• [PATCH 1/2] ARM: Kirkwood: ehci-orion: Add device tree binding   Sebastian Hesselbarth
• [PATCH] Crypto: CESA: Add support for DT based instantiation.   Sebastian Hesselbarth
• [PATCH v3 0/9] pinctrl: mvebu: pinctrl driver   Sebastian Hesselbarth
• [PATCH v3 1/9] pinctrl: mvebu: pinctrl driver core   Sebastian Hesselbarth
• [PATCH v3 2/9] pinctrl: mvebu: dove pinctrl driver   Sebastian Hesselbarth
• [PATCH v3 3/9] pinctrl: mvebu: kirkwood pinctrl driver   Sebastian Hesselbarth
• [PATCH v3 4/9] pinctrl: mvebu: add pinctrl driver for Armada 370   Sebastian Hesselbarth
• [PATCH v3 5/9] pinctrl: mvebu: add pinctrl driver for Armada XP   Sebastian Hesselbarth
• [PATCH v3 6/9] ARM: mvebu: add pinctrl device in DT for Armada 370/XP SoCs   Sebastian Hesselbarth
• [PATCH v3 7/9] ARM: mvebu: Add pinctrl support to Armada XP SoCs   Sebastian Hesselbarth
• [PATCH v3 8/9] ARM: mvebu: Add pinctrl support to Armada 370 SoC   Sebastian Hesselbarth
• [PATCH v3 9/9] ARM: mvebu: adjust Armada XP evaluation board DTS   Sebastian Hesselbarth
• [PATCH v3 0/9] pinctrl: mvebu: pinctrl driver   Sebastian Hesselbarth
• pinctrl: mvebu: minor fixes   Sebastian Hesselbarth
• arm: mvebu: improve Kconfig options handling for pinctrl   Sebastian Hesselbarth
• [PATCH 1/2] arm: mvebu: split Kconfig options for Armada 370 and XP   Sebastian Hesselbarth
• [PATCH 2/2] arm: mvebu: select the pinctrl drivers for Armada 370 and Armada XP platforms   Sebastian Hesselbarth
• [PATCH v4 00/10] pinctrl: mvebu: pinctrl driver   Sebastian Hesselbarth
• [PATCH v4 01/10] pinctrl: mvebu: pinctrl driver core   Sebastian Hesselbarth
• [PATCH v4 02/10] pinctrl: mvebu: dove pinctrl driver   Sebastian Hesselbarth
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Sebastian Hesselbarth
• [PATCH v4 04/10] pinctrl: mvebu: add pinctrl driver for Armada 370   Sebastian Hesselbarth
• [PATCH v4 05/10] pinctrl: mvebu: add pinctrl driver for Armada XP   Sebastian Hesselbarth
• [PATCH v4 06/10] ARM: mvebu: Add pinctrl support to Armada XP SoCs   Sebastian Hesselbarth
• [PATCH v4 07/10] ARM: mvebu: Add pinctrl support to Armada 370 SoC   Sebastian Hesselbarth
• [PATCH v4 08/10] ARM: mvebu: adjust Armada XP evaluation board DTS   Sebastian Hesselbarth
• [PATCH v4 09/10] arm: mvebu: split Kconfig options for Armada 370 and XP   Sebastian Hesselbarth
• [PATCH v4 10/10] arm: mvebu: select the pinctrl drivers for Armada 370 and Armada XP platforms   Sebastian Hesselbarth
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Sebastian Hesselbarth
• [PATCH v3 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Sebastian Hesselbarth
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Sebastian Hesselbarth
• [PATCH 00/11] pinctrl: mvebu: pinctrl driver   Sebastian Hesselbarth
• [PATCH] ARM: Orion5x: Fix too small coherent pool.   Sebastian Hesselbarth
• [PATCH 0/6] Dove fixes for arm-soc/for-next   Sebastian Hesselbarth
• [PATCH 1/6] ARM: dove: Add pcie clock support   Sebastian Hesselbarth
• [PATCH 2/6] ARM: dove: Fix tauros2 device tree init   Sebastian Hesselbarth
• [PATCH 3/6] ARM: dove: Fix clock names of sata and gbe   Sebastian Hesselbarth
• [PATCH 4/6] ARM: dove: Restructure SoC device tree descriptor   Sebastian Hesselbarth
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Sebastian Hesselbarth
• [PATCH 6/6] ARM: dove: Add crypto engine to DT   Sebastian Hesselbarth
• [PATCH 2/6] ARM: dove: Fix tauros2 device tree init   Sebastian Hesselbarth
• [PATCH 2/6] ARM: dove: Fix tauros2 device tree init   Sebastian Hesselbarth
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Sebastian Hesselbarth
• [PATCH] cpufreq: OMAP: remove redundant loops_per_jiffy code   Kevin Hilman
• [PATCH v4 20/21] serial: omap: move uart_omap_port definition to C file   Kevin Hilman
• [PATCH v4 00/21] OMAP UART Patches   Kevin Hilman
• [PATCH v4 00/21] OMAP UART Patches   Kevin Hilman
• [PATCHv4 4/8] ARM: OMAP3: add manual control for mpu / core pwrdm usecounting   Kevin Hilman
• [PATCH] perf: Use pre-empt safe cpu_get/put insted of smp_processor_id   Kevin Hilman
• [PATCH v2] gpio/omap: fix possible memory leak in omap2_gpio_dev_init()   Kevin Hilman
• [PATCH v2] gpio/omap: fix possible memory leak in omap2_gpio_dev_init()   Kevin Hilman
• [PATCH v2] perf: Use pre-empt safe cpu_get/put insted of smp_processor_id   Kevin Hilman
• [PATCH] CPUFreq: OMAP: remove unnecessary plat/ includes   Kevin Hilman
• [GIT PULL] ARM: OMAP: omap_device updates for v3.7   Kevin Hilman
• [PATCHv7 06/12] ARM: OMAP4: suspend: Program all domains to retention   Kevin Hilman
• [PATCHv8 00/23]I2C big cleanup   Kevin Hilman
• [PATCHv8 00/23]I2C big cleanup   Kevin Hilman
• [PATCHv8 21/22] i2c: omap: switch over to autosuspend API   Kevin Hilman
• [PATCHv8 00/23]I2C big cleanup   Kevin Hilman
• [PATCHv7 07/12] ARM: OMAP4: PM: put all domains to OSWR during suspend   Kevin Hilman
• [PATCH 4/7] ARM: OMAP2+: PM: use power domain functional state in stats counters   Kevin Hilman
• [PATCH 5/7] ARM: OMAP2+: PM debug: trace the functional power domains states   Kevin Hilman
• [PATCH 7/7] ARM: OMAP2+: PM: reorganize the powerdomain API in public and private parts   Kevin Hilman
• [PATCH v6 0/7] ARM: OMAP2+: PM: introduce the power domains functional states   Kevin Hilman
• [PATCHv8 00/23]I2C big cleanup   Kevin Hilman
• [PATCHv8 00/23]I2C big cleanup   Kevin Hilman
• [PATCH] RTC: TWL: ensure all interrupts are disabled during probe   Kevin Hilman
• [PATCHv8 00/23]I2C big cleanup   Kevin Hilman
• [PATCH] RTC: TWL: ensure all interrupts are disabled during probe   Kevin Hilman
• [PATCH] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp   Kevin Hilman
• [PATCH] serial: omap: Remove unnecessary checks from suspend/resume   Kevin Hilman
• [PATCHv4 8/8] ARM: OMAP3: do not delete per_clkdm autodeps during idle   Kevin Hilman
• arm-soc/for-next: fixup compile after platform_data move   Kevin Hilman
• [PATCH] serial: omap: fix the overrun case   Kevin Hilman
• [PATCH v2] serial: omap: fix the reciever line error case   Kevin Hilman
• [PATCH v2] PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled   Kevin Hilman
• [PATCH V2] ARM: OMAP: counter: add locking to read_persistent_clock   Kevin Hilman
• [PATCH] ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints   Kevin Hilman
• [PATCH] mmc: mxs-mmc: implement broken-cd   Lauri Hintsala
• [PATCH] mmc: mxs-mmc: implement broken-cd   Lauri Hintsala
• [PATCH] mmc: mxs-mmc: implement broken-cd   Lauri Hintsala
• [PATCH 1/2] serial: mxs-auart: fix the wrong setting order   Lauri Hintsala
• [PATCH] mmc: mxs-mmc: implement broken-cd   Lauri Hintsala
• [PATCH] mmc: mxs-mmc: implement broken-cd   Lauri Hintsala
• [PATCH] mmc: mxs-mmc: implement broken-cd   Lauri Hintsala
• How to get revision and serial numbers with device tree?   Lauri Hintsala
• [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Vaibhav Hiremath
• Without MACH_ option Early printk (DEBUG_LL)   Hiremath, Vaibhav
• [PATCH 0/3] gpio-twl4030: add new device tree properties   Hiremath, Vaibhav
• [PATCH 1/3] gpio-twl4030: get platform data from device tree   Vaibhav Hiremath
• [PATCH 2/3] gpio-twl4030: new dt properties for BeagleBoard and omap3-EVM   Vaibhav Hiremath
• [PATCH 2/4] can: c_can: Add d_can raminit support   Vaibhav Hiremath
• [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Hiremath, Vaibhav
• [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Hiremath, Vaibhav
• [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Hiremath, Vaibhav
• [PATCHv2 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Vaibhav Hiremath
• [PATCHv2 2/4] Input: keypad: Add smsc ece1099 keypad driver   Vaibhav Hiremath
• [PATCHv2 4/4] gpio: smscece: Add support for gpio IO expander feature   Vaibhav Hiremath
• [PATCH] ARM: omap_hwmod: Fix up resource names when booted with devicetree   Vaibhav Hiremath
• [PATCH RESEND 3/4] ARM: AM33XX: board-generic: Add of_dev_auxdata to pass d_can raminit   Vaibhav Hiremath
• [PATCH RESEND 3/4] ARM: AM33XX: board-generic: Add of_dev_auxdata to pass d_can raminit   Hiremath, Vaibhav
• [PATCH 01/10] ARM: OMAP3+: Implement timer workaround for errata i103 and i767   Vaibhav Hiremath
• [PATCH] ARM: omap_hwmod: Fix up resource names when booted with devicetree   Hiremath, Vaibhav
• [PATCH 02/10] ARM: OMAP: Fix timer posted mode support   Vaibhav Hiremath
• [PATCH 09/10] ARM: OMAP: Add dmtimer interrupt disable function   Vaibhav Hiremath
• [PATCH 00/10] ARM: OMAP: DMTIMER fixes and clean-up   Vaibhav Hiremath
• [PATCH 1/3] arm: omap: hwmod: add a new addr space in otg for writing to control module   Vaibhav Hiremath
• [PATCH 1/3] arm: omap: hwmod: add a new addr space in otg for writing to control module   Hiremath, Vaibhav
• [GIT PULL] ARM: OMAP2+: PRCM/hwmod: some fixes for 3.6-rc   Vaibhav Hiremath
• [RFC PATCH] ARM: OMAP2+: omap-device: Do not overwrite resources allocated by OF layer   Hiremath, Vaibhav
• [PATCH] ARM: dts: AM33XX: fix gpio node numbering to match hardware   Hiremath, Vaibhav
• [PATCH] ARM: dts: AM33XX: fix gpio node numbering to match hardware   Hiremath, Vaibhav
• [PATCH v2 0/2] ARM: dts: AM33xx: Correct gpio labels to match docs   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: Makefile.boot: Add am335x evm and bone targets   Hiremath, Vaibhav
• [PATCH 00/29] Move OMAP2+ over to use COMMON clock   Vaibhav Hiremath
• [PATCH v2 3/3] usb: musb: omap: Add device tree support for omap musb glue   Vaibhav Hiremath
• [PATCH] ARM: dts: AM33XX: fix gpio node numbering to match hardware   Hiremath, Vaibhav
• [PATCH v2 3/3] usb: musb: omap: Add device tree support for omap musb glue   Hiremath, Vaibhav
• [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Hiremath, Vaibhav
• [PATCH 13/16] ARM: omap: move platform_data definitions   Vaibhav Hiremath
• [PATCH 00/29] Move OMAP2+ over to use COMMON clock   Hiremath, Vaibhav
• [PATCH 13/16] ARM: omap: move platform_data definitions   Hiremath, Vaibhav
• [GIT PULL] ARM: OMAP2+: PRCM/hwmod: some fixes for 3.6-rc   Hiremath, Vaibhav
• [GIT PULL] ARM: AM33xx: hwmod/clock: add hwmod data and some clock/hwmod fixes for 3.7   Vaibhav Hiremath
• [GIT PULL] ARM: OMAP2+: PRCM/hwmod: some fixes for 3.6-rc   Hiremath, Vaibhav
• [PATCH 0/2] ARM: AM33XX: hwmod: Minor fixes for v3.7   Vaibhav Hiremath
• [PATCH 1/2] ARM: AM33XX: hwmod: Remove platform specific header files   Vaibhav Hiremath
• [PATCH 2/2] ARM: AM33XX: hwmod: Add OMAP_INTC_START offset to all module int nos   Vaibhav Hiremath
• [PATCH 2/2] ARM: AM33XX: hwmod: Add OMAP_INTC_START offset to all module int nos   Hiremath, Vaibhav
• [PATCH 01/10] ARM: OMAP3+: Implement timer workaround for errata i103 and i767   Hiremath, Vaibhav
• [PATCH 02/10] ARM: OMAP: Fix timer posted mode support   Hiremath, Vaibhav
• [PATCH 01/10] ARM: OMAP3+: Implement timer workaround for errata i103 and i767   Hiremath, Vaibhav
• [PATCH] ARM: am33xx: clk: Update clkdev table to add mcasp alias   Vaibhav Hiremath
• [PATCH v2] ARM: OMAP2+: Add am335x evm and bone targets to common Makefile   Vaibhav Hiremath
• [PATCH V2 0/7] ARM: OMAP2+: Add device-tree support for timers   Vaibhav Hiremath
• [PATCH V2 0/7] ARM: OMAP2+: Add device-tree support for timers   Hiremath, Vaibhav
• Booting DT kernel on a non-DT bootloader   Simon Horman
• [PATCH 05/11] ARM: shmobile: r8a7779: add USB common phy initializer   Simon Horman
• [PATCH] ARM: shmobile: r8a7779: remove USB phy initializer   Simon Horman
• [PATCH] ARM: shmobile: r8a7779: remove USB phy initializer   Simon Horman
• [GIT PULL] Renesas ARM-based SoC fix for v3.6 #2   Simon Horman
• [PATCH 1/3] ARM: shmobile: armadillo800eva: fixup: sound card detection order   Simon Horman
• [PATCH 2/3] ARM: shmobile: mackerel: fixup usb module order   Simon Horman
• [PATCH 3/3] ARM: shmobile: armadillo800eva: enable rw rootfs mount   Simon Horman
• [GIT PULL] Renesas ARM-based SoC fix for v3.6 #2   Simon Horman
• [PATCH] ARM: shmobile: r8a7779: remove USB phy initializer   Simon Horman
• [GIT PULL v3] Renesas ARM-based SoC: Marzen and r8a7779 for 3.7   Simon Horman
• [PATCH 1/5] r8a7779: add SDHI clock support   Simon Horman
• [PATCH 2/5] marzen: add SDHI0 support   Simon Horman
• [PATCH 3/5] ARM: mach-shmobile: marzen: defconfig update   Simon Horman
• [PATCH 4/5] ARM: shmobile: marzen: fixup regulator id for smsc911x   Simon Horman
• [PATCH 5/5] ARM: shmobile: marzen: enable thermal sensor   Simon Horman
• [GIT PULL v3] Renesas ARM-based SoC: Marzen and r8a7779 for 3.7   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: SoC for 3.7   Simon Horman
• [PATCH] r8a7779: add SDHI clock support   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: Boards for 3.7   Simon Horman
• [PATCH 1/3] ARM: shmobile: marzen: add SDHI0 support   Simon Horman
• [PATCH 2/3] ARM: shmobile: marzen: fixup regulator id for smsc911x   Simon Horman
• [PATCH 3/3] ARM: shmobile: marzen: enable thermal sensor   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: defconfig for 3.7   Simon Horman
• [PATCH] ARM: mach-shmobile: marzen: defconfig update   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: KZM-A9-GT for 3.7 #2   Simon Horman
• [RFC PATCH 2/2] ARM: kexec: Check segment memory addresses   Simon Horman
• [RFC PATCH 1/2] ARM: kexec: scan for dtb magic in segments   Simon Horman
• [PATCH v3 0/2] ARM: shmobile: enable PMU(Performance Monitoring Unit)   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: SoC for 3.7   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: SoC for 3.7   Simon Horman
• Booting DT kernel on a non-DT bootloader   Simon Horman
• [GIT PULL] GPIO: KZM-A9-GT for 3.7   Simon Horman
• [PATCH] ARM: shmobile: kzm9g: use gpio-keys instead of gpio-keys-polled   Simon Horman
• [GIT] Renesas ARM-based SoC: pmu/cleanup for 3.7   Simon Horman
• [PATCH 1/2] ARM: shmobile: sh73a0: enable PMU(Performance Monitoring Unit)   Simon Horman
• [PATCH 2/2] ARM: shmobile: emev2: enable PMU(Performance Monitoring Unit)   Simon Horman
• [PATCH v3 0/2] ARM: shmobile: enable PMU(Performance Monitoring Unit)   Simon Horman
• [GIT] Renesas ARM-based SoC: pmu/cleanup for 3.7   Simon Horman
• [PATCH] ARM: shmobile: r8a7779: remove USB phy initializer   Simon Horman
• [PATCH 0/2] ARM ERRATA 775420 and 782773 workarounds   Simon Horman
• [PATCH 1/2] arm: Add ARM ERRATA 775420 workaround   Simon Horman
• [PATCH 2/2] arm: Add ARM ERRATA 782773 workaround   Simon Horman
• [PATCH] ARM: shmobile: r8a7779: remove USB phy initializer   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: SoC for 3.7   Simon Horman
• [PATCH 2/2] arm: Add ARM ERRATA 782773 workaround   Simon Horman
• [PATCH] ARM: shmobile: armadillo800eva: Add support RTC   Simon Horman
• [PATCH v2] ARM: shmobile: armadillo800eva: Add support RTC   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: Boards for 3.7 #2   Simon Horman
• [PATCH] ARM: shmobile: armadillo800eva: Add support RTC   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: Boards for 3.7 #2   Simon Horman
• [PATCH] ARM: shmobile: r8a7740: Enable PMU   Simon Horman
• [PATCH] ARM: shmobile: r8a7740: Enable PMU   Simon Horman
• [PATCH 0/2] ARM; shmobile: kzm9g: enable sensors on the board   Simon Horman
• [PATCH 1/2] ARM: shmobile: kzm9g: enable magnetometer ak8975.   Simon Horman
• [PATCH 2/2] ARM: shmobile: kzm9g: enable three-axis digital accelerometer ADXL345   Simon Horman
• [PATCH] ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2   Simon Horman
• [GIT PULL] Renesas ARM-based SoC fix for v3.6 #3   Simon Horman
• [PATCH] ARM: shmobile: kzm9g: bugfix: correct mmcif interrupt settings   Simon Horman
• [PATCH 01/24] ARM: shmobile: use __iomem pointers for MMIO   Simon Horman
• [PATCH 01/24] ARM: shmobile: use __iomem pointers for MMIO   Simon Horman
• [PATCH 01/24] ARM: shmobile: use __iomem pointers for MMIO   Simon Horman
• [PATCH 2/2] arm: Add ARM ERRATA 782773 workaround   Simon Horman
• [PATCH 1/2] arm: Add ARM ERRATA 775420 workaround   Simon Horman
• [PATCH] ARM: dtb: move all dtb targets to common Makefile   Simon Horman
• [PATCH] ARM: mach-shmobile: add FLCTL DMA slave definitions for sh7372   Simon Horman
• [PATCH 2/2] arm: Add ARM ERRATA 782773 workaround   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: KZM-9A-GT for 3.7   Simon Horman
• [PATCH 1/1] ARM: Add option to configure output line for McSPI driver   Stan Hu
• [PATCH 00/10] ARM: OMAP: DMTIMER fixes and clean-up   Jon Hunter
• [PATCH 01/10] ARM: OMAP3+: Implement timer workaround for errata i103 and i767   Jon Hunter
• [PATCH 02/10] ARM: OMAP: Fix timer posted mode support   Jon Hunter
• [PATCH 03/10] ARM: OMAP3: Correct HWMOD DMTIMER SYSC register declarations   Jon Hunter
• [PATCH 04/10] ARM: OMAP2/3: Define HWMOD software reset status for DMTIMERs   Jon Hunter
• [PATCH 05/10] ARM: OMAP2+: Don't use __omap_dm_timer_reset()   Jon Hunter
• [PATCH 06/10] ARM: OMAP: Fix dmtimer reset for timer1   Jon Hunter
• [PATCH 07/10] ARM: OMAP: Clean-up dmtimer reset code   Jon Hunter
• [PATCH 08/10] ARM: OMAP: Clean-up timer posted mode support   Jon Hunter
• [PATCH 09/10] ARM: OMAP: Add dmtimer interrupt disable function   Jon Hunter
• [PATCH 10/10] ARM: OMAP: Remove unnecessary call to clk_get()   Jon Hunter
• [PATCH v8 1/3] ARM: OMAP2/3: hwmod data: add gpmc   Jon Hunter
• [PATCH v8 1/3] ARM: OMAP2/3: hwmod data: add gpmc   Jon Hunter
• [PATCH v8 2/3] ARM: OMAP2+: gpmc: Adapt to HWMOD   Jon Hunter
• [PATCH v8 3/3] ARM: OMAP2+: gpmc: minimal driver support   Jon Hunter
• [PATCH 01/10] ARM: OMAP3+: Implement timer workaround for errata i103 and i767   Jon Hunter
• [PATCH 02/10] ARM: OMAP: Fix timer posted mode support   Jon Hunter
• [PATCH 09/10] ARM: OMAP: Add dmtimer interrupt disable function   Jon Hunter
• [PATCH 00/10] ARM: OMAP: DMTIMER fixes and clean-up   Jon Hunter
• [PATCH 01/10] ARM: OMAP3+: Implement timer workaround for errata i103 and i767   Jon Hunter
• [PATCH 01/10] ARM: OMAP3+: Implement timer workaround for errata i103 and i767   Jon Hunter
• [PATCH 02/10] ARM: OMAP: Fix timer posted mode support   Jon Hunter
• [RFC RESEND 1/4] arm/dts: OMAP: Add timer nodes   Jon Hunter
• [RFC RESEND 1/4] arm/dts: OMAP: Add timer nodes   Jon Hunter
• [RFC RESEND 1/4] arm/dts: OMAP: Add timer nodes   Jon Hunter
• [PATCH V3 0/8] ARM: OMAP4: Add PMU Support   Jon Hunter
• [PATCH V3 1/8] ARM: OMAP3: Add debugss HWMOD data   Jon Hunter
• [PATCH V3 2/8] ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD   Jon Hunter
• [PATCH V3 3/8] ARM: OMAP4: Re-map the CTIs IRQs from MPU to DEBUGSS   Jon Hunter
• [PATCH V3 4/8] ARM: OMAP4430: Create PMU device via HWMOD   Jon Hunter
• [PATCH V3 5/8] ARM: OMAP2+: PMU: Add runtime PM support   Jon Hunter
• [PATCH V3 6/8] ARM: OMAP4: Route PMU IRQs to CTI IRQs   Jon Hunter
• [PATCH V3 7/8] ARM: OMAP4: Enable PMU for OMAP4460/70   Jon Hunter
• [PATCH V3 8/8] ARM: OMAP2+: PMU: Add QoS constraint   Jon Hunter
• [PATCH 08/10] ARM: OMAP: Clean-up timer posted mode support   Jon Hunter
• [PATCH] arm/dts: Add omap3-beagle.dts   Jon Hunter
• [PATCH V2] arm/dts: Add omap3-beagle.dts   Jon Hunter
• [PATCH 08/10] ARM: OMAP: Clean-up timer posted mode support   Jon Hunter
• [PATCH 08/10] ARM: OMAP: Clean-up timer posted mode support   Jon Hunter
• [PATCH V3 1/8] ARM: OMAP3: Add debugss HWMOD data   Jon Hunter
• [PATCH V4 0/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V4 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V4 2/2] dmaengine: add helper function to request a slave DMA channel   Jon Hunter
• [PATCH V2 0/7] ARM: OMAP2+: Add device-tree support for timers   Jon Hunter
• [PATCH V2 1/7] ARM: dts: OMAP: Add timer nodes   Jon Hunter
• [PATCH V2 2/7] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices   Jon Hunter
• [PATCH V2 3/7] ARM: OMAP4: Add timer clock aliases for device-tree   Jon Hunter
• [PATCH V2 4/7] ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP   Jon Hunter
• [PATCH V2 5/7] ARM: OMAP: Add function to request a timer by capability   Jon Hunter
• [PATCH V2 6/7] ARM: OMAP3: Add generic machine descriptor for boards with OMAP3 GP devices   Jon Hunter
• [PATCH V2 7/7] ARM: OMAP: Add DT support for timer driver   Jon Hunter
• [PATCH V2 0/7] ARM: OMAP2+: Add device-tree support for timers   Jon Hunter
• [PATCH] ARM: OMAP2420: Cosmetic fix for timer clock aliases   Jon Hunter
• [PATCH V4 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V4 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V5 0/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V5 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V5 2/2] dmaengine: add helper function to request a slave DMA channel   Jon Hunter
• [PATCH V4 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V5 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V6 0/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Jon Hunter
• [PATCH V3 1/8] ARM: OMAP3: Add debugss HWMOD data   Jon Hunter
• [PATCH V3 8/8] ARM: OMAP2+: PMU: Add QoS constraint   Jon Hunter
• [PATCH V3 6/8] ARM: OMAP4: Route PMU IRQs to CTI IRQs   Jon Hunter
• [PATCH] ARM: OMAP2+: Fix PMU interrupt definitions   Jon Hunter
• [PATCH V3 0/8] ARM: OMAP4: Add PMU Support   Jon Hunter
• [PATCH V3 0/8] ARM: OMAP4: Add PMU Support   Jon Hunter
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Jon Hunter
• [PATCH v2] of: dma: fix typos in generic dma binding definition   Jon Hunter
• [PATCH] of: dma: fix potential deadlock when requesting a slave channel   Jon Hunter
• [PATCH V2 0/7] ARM: OMAP2+: Add device-tree support for timers   Jon Hunter
• [PATCH V2 7/7] ARM: OMAP: Add DT support for timer driver   Jon Hunter
• [PATCH V2 0/7] ARM: OMAP2+: Add device-tree support for timers   Jon Hunter
• [PATCH v7 08/11] ARM: OMAP2+: gpmc: generic timing calculation   Jon Hunter
• [PATCH v7 08/11] ARM: OMAP2+: gpmc: generic timing calculation   Jon Hunter
• [PATCH 2/4] ARM: OMAP: DMA: Move plat/dma hearder to platform_data/dma-omap   Jon Hunter
• [PATCH V2 0/7] ARM: OMAP2+: Add device-tree support for timers   Jon Hunter
• [PATCH V2 0/7] ARM: OMAP2+: Add device-tree support for timers   Jon Hunter
• [PATCH V2 0/7] ARM: OMAP2+: Add device-tree support for timers   Jon Hunter
• [PATCH v2] ARM: Build dtb files in all target   Ben Hutchings
• [PATCH v2] ARM: Build dtb files in all target   Ben Hutchings
• [PATCH v2] ARM: Build dtb files in all target   Ben Hutchings
• [PATCH 08/10] net/macb: macb_get_drvinfo: add GEM/MACB suffix to differentiate revision   Ben Hutchings
• [PATCH 09/10] net/macb: ethtool interface: add register dump feature   Ben Hutchings
• [PATCH v2 09/10] net/macb: ethtool interface: add register dump feature   Ben Hutchings
• [PATCH] ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+   Ben Hutchings
• [PATCH v2 4/9] net/macb: remove macb_get_drvinfo()   Ben Hutchings
• [PATCH v2 7/9] net/macb: ethtool interface: add register dump feature   Ben Hutchings
• [PATCH 0/3] omap: musb: Add device tree support   Kishon Vijay Abraham I
• [PATCH 1/3] arm: omap: hwmod: add a new addr space in otg for writing to control module   Kishon Vijay Abraham I
• [PATCH 2/3] usb: musb: omap: write directly to mailbox instead of using phy   Kishon Vijay Abraham I
• [PATCH 3/3] usb: musb: omap: Add device tree support for omap musb glue   Kishon Vijay Abraham I
• [PATCH 0/5] usb: phy/otg: add dt support   Kishon Vijay Abraham I
• [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy   Kishon Vijay Abraham I
• [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Kishon Vijay Abraham I
• [PATCH 3/5] drivers: usb: twl6030: Add dt support for twl6030 usb   Kishon Vijay Abraham I
• [PATCH 4/5] drivers: usb: twl4030: Add device tree support for twl4030 usb   Kishon Vijay Abraham I
• [PATCH 5/5] arm: omap: phy: remove unused functions from omap-phy-internal.c   Kishon Vijay Abraham I
• [PATCH v2] arm: omap: hwmod: make *phy_48m* as the main_clk of ocp2scp   Kishon Vijay Abraham I
• [PATCH] arm/dts: omap: Add omap-usb2 dt data   Kishon Vijay Abraham I
• [PATCH v2 0/3] arm/dts: omap: add dt data for MUSB   Kishon Vijay Abraham I
• [PATCH v2 1/3] arm/dts: Add twl6030-usb data   Kishon Vijay Abraham I
• [PATCH v2 2/3] arm/dts: Add twl4030-usb data   Kishon Vijay Abraham I
• [PATCH v2 3/3] arm/dts: omap: Add usb_otg and glue data   Kishon Vijay Abraham I
• [PATCH v2 0/3] omap: musb: Add device tree support   Kishon Vijay Abraham I
• [PATCH v2 1/3] arm: omap: hwmod: add a new addr space in otg for writing to control module   Kishon Vijay Abraham I
• [PATCH v2 2/3] usb: musb: omap: write directly to mailbox instead of using phy   Kishon Vijay Abraham I
• [PATCH v2 3/3] usb: musb: omap: Add device tree support for omap musb glue   Kishon Vijay Abraham I
• [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB   Kishon Vijay Abraham I
• [PATCH v3 1/3] ARM: dts: Add twl6030-usb data   Kishon Vijay Abraham I
• [PATCH v3 2/3] ARM: dts: Add twl4030-usb data   Kishon Vijay Abraham I
• [PATCH v3 3/3] ARM: dts: omap: Add usb_otg and glue data   Kishon Vijay Abraham I
• [PATCH 0/2] ARM: dts: Add subnode for ocp2scp   Kishon Vijay Abraham I
• [PATCH 1/2] ARM: dts: omap: add *reg* property for ocp2scp   Kishon Vijay Abraham I
• [PATCH 2/2] ARM: dts: omap: Add omap-usb2 dt data   Kishon Vijay Abraham I
• [PATCH 0/4] usb: phy: add usb3 phy driver   Kishon Vijay Abraham I
• [PATCH 1/4] usb: phy: add a new driver for usb3 phy   Kishon Vijay Abraham I
• [PATCH 2/4] usb: dwc3: Fix gadget pullup in SS mode   Kishon Vijay Abraham I
• [PATCH 3/4] usb: phy: omap-usb3: Decrease the number of transitions to recovery   Kishon Vijay Abraham I
• [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5   Kishon Vijay Abraham I
• [PATCH v2 0/2] usb: phy: add usb3 phy driver   Kishon Vijay Abraham I
• [PATCH v2 1/2] usb: phy: add a new driver for usb3 phy   Kishon Vijay Abraham I
• [PATCH v2 2/2] usb: phy: omap-usb2: enable 960Mhz clock for omap5   Kishon Vijay Abraham I
• [PATCH 0/6] usb: dwc3-omap: add dt support   Kishon Vijay Abraham I
• [PATCH 1/6] usb: dwc3-omap: use of_platform API to create dwc3 core pdev   Kishon Vijay Abraham I
• [PATCH 2/6] usb: dwc3-omap: use runtime API's to enable clocks   Kishon Vijay Abraham I
• [PATCH 3/6] usb: dwc3-omap: Remove explicit writes to SYSCONFIG register   Kishon Vijay Abraham I
• [PATCH 4/6] usb: dwc3-omap: Add an API to write to dwc mailbox   Kishon Vijay Abraham I
• [PATCH 5/6] usb: dwc3-omap: Minor fixes to get dt working   Kishon Vijay Abraham I
• [PATCH 6/6] usb: dwc3: core: add dt support for dwc3 core   Kishon Vijay Abraham I
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Grazvydas Ignotas
• [PATCH v3 00/12] Initial multi-platform support   Jamie Iles
• [alsa-devel] [RFC 1/3] ASoC: dmaengine: Don't use runtime private data for dmaengine data   Takashi Iwai
• [alsa-devel] [PATCH 11/11] ASoC: omap-pcm: Convert to use dmaengine   Takashi Iwai
• [PATCH v3 1/2] iommu/shmobile: Add iommu driver for Renesas IPMMU modules   Nobuhiro Iwamatsu
• [PATCH] ARM: shmobile: armadillo800eva: Add support RTC   Nobuhiro Iwamatsu
• [PATCH v2] ARM: shmobile: armadillo800eva: Add support RTC   Nobuhiro Iwamatsu
• [PATCH] ARM: shmobile: armadillo800eva: Add support RTC   Nobuhiro Iwamatsu
• GCC 4.6.x miscompiling arm-linux?   David Jander
• GCC 4.6.x miscompiling arm-linux?   David Jander
• GCC 4.6.x miscompiling arm-linux?   David Jander
• GCC 4.6.x miscompiling arm-linux?   David Jander
• GCC 4.6.x miscompiling arm-linux?   David Jander
• GCC 4.6.x miscompiling arm-linux?   David Jander
• GCC 4.6.x miscompiling arm-linux?   David Jander
• GCC 4.6.x miscompiling arm-linux?   David Jander
• GCC 4.6.x miscompiling arm-linux?   David Jander
• GCC 4.6.x miscompiling arm-linux?   David Jander
• [PATCH 01/10] usb: otg: msm: Convert to clk_prepare/unprepare   Pankaj Jangra
• [PATCH 08/10] ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver   Pankaj Jangra
• [PATCH 07/10] ARM: msm: Remove clock-7x30.h include file   Pankaj Jangra
• [PATCH 09/10] ARM: msm: Make proc_comm clock control into a platform driver   Pankaj Jangra
• [PATCH 10/10] ARM: msm: Migrate to common clock framework   Pankaj Jangra
• [PATCH 01/10] usb: otg: msm: Convert to clk_prepare/unprepare   Pankaj Jangra
• [PATCH 07/10] ARM: msm: Remove clock-7x30.h include file   Pankaj Jangra
• [PATCH 10/10] ARM: msm: Migrate to common clock framework   Pankaj Jangra
• [PATCH] arm/omap: Replace board_ref_clock with enum values   Pankaj Jangra
• [PATCH 07/16] ARM: pxa: move platform_data definitions   Robert Jarzmik
• PXA PWM possible regression after 3.5: backlight remains off after resume   Robert Jarzmik
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Seth Jennings
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Seth Jennings
• [PATCH V2] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Seth Jennings
• [GIT PULL V2] kirkwood fix for v3.6   Olof Johansson
• [GIT PULL] Renesas ARM-based SoC fix for v3.6   Olof Johansson
• [GIT PULL] CSR SiRFmarco preparing patches   Olof Johansson
• [GIT PULL] Kirkwood: board changes for v3.7   Olof Johansson
• [PATCH] ARM: ux500: Correct Ux500 family names usage   Olof Johansson
• [GIT PULL] Renesas ARM-based SoC fix for v3.6 #2   Olof Johansson
• [PATCH 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Olof Johansson
• [PATCH 4/4] ARM: ks8695: convert to generic time and clocksource   Olof Johansson
• [GIT PULL] ARM perf updates for 3.7   Olof Johansson
• [PATCH] ARM: gemini: fix the gemini build   Olof Johansson
• [PATCH 2/2] ARM: allow for ATAGS to be configured out when DT support is selected   Olof Johansson
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Olof Johansson
• [GIT PULL] ux500 core updates   Olof Johansson
• [GIT PULL] ks8695 timer changes for v3.7   Olof Johansson
• [GIT PULL] Renesas ARM-based SoC: KZM-9A-GT for 3.7   Olof Johansson
• [GIT PULL v2] Renesas ARM-based SoC: Core for 3.7   Olof Johansson
• [GIT PULL] Renesas ARM-based SoC: KZM-A9-GT for 3.7 #2   Olof Johansson
• [PATCH] ARM: shmobile: r8a7740: add USB24 clock explain and sample code   Olof Johansson
• [GIT PULL] Renesas ARM-based SoC: AG5EVM for 3.7   Olof Johansson
• [GIT PULL v3] Renesas ARM-based SoC: Marzen and r8a7779 for 3.7   Olof Johansson
• [GIT PULL] ARM: mach-pnx4008: Remove architecture   Olof Johansson
• [GIT PULL] CSR SiRFprimaII dt-binding pinmux mapping   Olof Johansson
• [GIT PULL] Kirkwood: board changes for v3.7   Olof Johansson
• [GIT PULL] ARM: SoC fixes for v3.6-rc5   Olof Johansson
• [PATCH] MAINTAINERS: tegra: remove Olof/Colin, add device tree files   Olof Johansson
• [GIT PULL] Renesas ARM-based SoC: SoC for 3.7   Olof Johansson
• [GIT PULL] Renesas ARM-based SoC: defconfig for 3.7   Olof Johansson
• [PATCH] ARM: ks8695: add board support for the OpenGear boards based on the KS8695   Olof Johansson
• [GIT PULL] ARM: LPC32xx: defconfig update   Olof Johansson
• [GIT PULL] ARM: LPC32xx: dts update   Olof Johansson
• [GIT PULL] ARM: LPC32xx: core update   Olof Johansson
• [GIT PULL] omap fixes for v3.6-rc4   Olof Johansson
• [PATCH v2 RESEND] ARM: Build dtb files in all target   Olof Johansson
• [PATCH] ARM: PRIMA2: rstc: use of_property_read_u32 to replace of_get_property and be32_to_cpup   Olof Johansson
• [PATCH v3 00/31] AArch64 Linux kernel port   Olof Johansson
• [PATCH] ARM: ks8695: add board support for the OpenGear boards based on the KS8695   Olof Johansson
• [PATCH 1/4] ARM: ks-8695: merge the timer header into the timer driver   Olof Johansson
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Olof Johansson
• [PATCH] watchdog: ks8695: sink registers into driver   Olof Johansson
• [GIT PULL] Renesas ARM-based SoC: SoC for 3.7   Olof Johansson
• [GIT] Renesas ARM-based SoC: pmu/cleanup for 3.7   Olof Johansson
• [GIT PULL] Renesas ARM-based SoC: Boards for 3.7   Olof Johansson
• [PATCH 1/3] ARM: Remove bcmring NAND driver   Olof Johansson
• [GIT PULL] i.MX Fixes   Olof Johansson
• [GIT PULL V2 1/4] ARM: Kirkwood: DT bindings for v3.7   Olof Johansson
• [GIT PULL][for 3.7] pull request of clk branch in arch-pxa git tree   Olof Johansson
• [GIT PULL][for 3.7] pull requst of board branch in arch pxa   Olof Johansson
• [GIT PULL 1/4] mxs device tree changes for 3.7   Olof Johansson
• [GIT PULL 2/4] mxs sparse-irq support   Olof Johansson
• [GIT PULL 3/4] mxs clk device tree lookup   Olof Johansson
• [GIT PULL 4/4] mxs defconfig update for 3.7   Olof Johansson
• [GIT PULL 1/2] imx device tree changes   Olof Johansson
• [GIT PULL 2/2] imx6q clk device tree lookup   Olof Johansson
• [GIT PULL] msm-core changes for v3.7   Olof Johansson
• [PATCH v2 2/2] ARM: Remove mach-bcmring   Olof Johansson
• [PATCH] ARM: add back in KS8695 based SnapGear board entries   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.6-rc6   Olof Johansson
• [GIT PULL] msm-core changes for v3.7   Olof Johansson
• [GIT PULL 2/4] mxs sparse-irq support   Olof Johansson
• [PATCH v2 13/31] arm64: Device specific operations   Olof Johansson
• [PATCH v2 07/31] arm64: Process management   Olof Johansson
• [PATCH V3 1/5] ARM: add infra-structure for BCM2708/BCM2835 and Raspberry Pi   Olof Johansson
• [PATCH 4/5] ARM: EXYNOS: Add support for Exynos secure firmware   Olof Johansson
• [GIT PULL] Renesas ARM-based SoC: Boards for 3.7 #2   Olof Johansson
• [GIT PULL] i.MX patches for -next   Olof Johansson
• [GIT PULL 0/5] MSM changes for 3.7 merge window   Olof Johansson
• [PATCH] ARM: ux500: 8500: use hsit_a_2 group for HSI   Olof Johansson
• [GIT PULL 01/10] ARM: tegra: fixes for 3.7   Olof Johansson
• [GIT PULL 02/10] ARM: tegra: first round of cleanup   Olof Johansson
• [GIT PULL 03/10] ARM: tegra: remove board files   Olof Johansson
• [GIT PULL 04/10] ARM: tegra: switch to the common clock framework   Olof Johansson
• [GIT PULL 05/10] ARM: tegra: i2c driver enhancements mostly related to clocking   Olof Johansson
• [GIT PULL 06/10] ARM: tegra: implement CPU hotplug   Olof Johansson
• [GIT PULL 07/10] ARM: tegra: device tree changes   Olof Johansson
• [GIT PULL 09/10] ARM: tegra: defconfig updates   Olof Johansson
• [GIT PULL 10/10] ARM: tegra: MAINTAINERS updates   Olof Johansson
• [GIT PULL 08/10] ARM: tegra: second round of cleanups   Olof Johansson
• [GIT PULL 1/7] omap non-critical fixes for v3.7 merge window   Olof Johansson
• [GIT PULL 2/7] omap device changes for v3.7 merge window   Olof Johansson
• [GIT PULL 3/7] omap gpmc cleanup for v3.7 merge window   Olof Johansson
• [GIT PULL 4/7] omap custom atag removal for v3.7 merge window   Olof Johansson
• [GIT PULL 5/7] omap sparse irq and local hardware.h cleanup for v3.7 merge window   Olof Johansson
• [GIT PULL 6/7] omap makefile and sparse cleanup for v3.7 merge window   Olof Johansson
• [GIT PULL 7/7] am33xx hwmod data for v3.7 merge window   Olof Johansson
• [GIT PULL 1/7] omap non-critical fixes for v3.7 merge window   Olof Johansson
• linux-next: build failure after merge of the final tree (arm-soc tree related)   Olof Johansson
• [GIT PULL] Samsung fixes-3 for v3.6   Olof Johansson
• [GIT PULL] Samsung fixes-3 for v3.6   Olof Johansson
• [GIT PULL] omap fixes for linux next for v3.7 merge window   Olof Johansson
• [GIT PULL] Samsung fixes-3 for v3.6   Olof Johansson
• [GIT PULL] Renesas ARM-based SoC fix for v3.6 #3   Olof Johansson
• [GIT PULL] at91: one fix for 3.6   Olof Johansson
• [GIT PULL] i.MX fixes for 3.6   Olof Johansson
• [PATCH 1/1] drivers: bus: Move the OMAP interconnect driver to drivers/bus/   Olof Johansson
• [GIT PULL] omap device tree changes for v3.7 merge window   Olof Johansson
• [PATCH 1/1] drivers: bus: Move the OMAP interconnect driver to drivers/bus/   Olof Johansson
• [GIT PULL RESEND] arm-soc: vt8500: Convert mach-vt8500 to devicetree   Olof Johansson
• [GIT PULL 6/7] Samsung cleanup fimd header for v3.7   Olof Johansson
• [GIT PULL 1/7] Samsung cleanup for v3.7   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.6-rc   Olof Johansson
• [GIT PULL] ARM: add basic BCM2835 SoC and Raspberry Pi board support   Olof Johansson
• [GIT PULL] ARM: tegra: second round of device tree changes   Olof Johansson
• [PATCH] ARM: tegra: harmony: fix ldo7 regulator-name   Olof Johansson
• [GIT PULL] ARM: tegra: switch to dmaengine   Olof Johansson
• [GIT PULL 08/10] ARM: tegra: second round of cleanups   Olof Johansson
• [GIT PULL] imx device tree changes for 3.7 (take 2)   Olof Johansson
• [GIT PULL] mxs device tree changes for 3.7 (take 2)   Olof Johansson
• [GIT PULL] omap header cleanup to make headers local for v3.7 merge window   Olof Johansson
• [GIT PULL] ARM initial multi-platform support   Olof Johansson
• [PATCH] ARM: highbank: call highbank_pm_init from .init_machine   Olof Johansson
• [PATCH] ARM: dtb: move all dtb targets to common Makefile   Olof Johansson
• [PATCH] ARM: dtb: move all dtb targets to common Makefile   Olof Johansson
• [PATCH] ARM: dtb: move all dtb targets to common Makefile   Olof Johansson
• Status of arm-soc for 3.7   Olof Johansson
• [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support   Olof Johansson
• [PATCH 1/2] ARM: Kirkwood: ehci-orion: Add device tree binding   Olof Johansson
• [GIT PULL V3 2/5] ARM: Kirkwood: DT changes for v3.7   Olof Johansson
• [GIT PULL V3 4/5] ARM: Kirkwood: cleanup for v3.7   Olof Johansson
• [GIT PULL V3 1/5] ARM: Kirkwood: address decoding change for v3.7   Olof Johansson
• [PATCH 4/5] ARM: EXYNOS: Add support for Exynos secure firmware   Olof Johansson
• [PATCH 2/5] ARM: Add interface for registering and calling firmware-specific operations   Olof Johansson
• [PATCH 0/5] ARM: EXYNOS: Add secure firmware support   Olof Johansson
• [GIT PULL 1/4] Samsung fixes for v3.7   Olof Johansson
• [GIT PULL 2/4] Samsung pinctrl-2 for v3.7   Olof Johansson
• [GIT PULL 3/4] Samsung devel for v3.7   Olof Johansson
• [GIT PULL][for 3.7] pull request on board branch from arch-pxa   Olof Johansson
• [GIT PULL][for 3.7] pull request on dt2 branch from arch-pxa   Olof Johansson
• [GIT PULL][for 3.6] pull request on fixes branch from arch-pxa   Olof Johansson
• [PATCH 2/5] ARM: Add interface for registering and calling firmware-specific operations   Olof Johansson
• [PATCH 4/5] ARM: EXYNOS: Add support for Exynos secure firmware   Olof Johansson
• [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support   Olof Johansson
• Status of arm-soc for 3.7   Olof Johansson
• [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support   Olof Johansson
• [GIT PULL V5 0/7] ARM: kirkwood/dove/mvebu changes for v3.7   Olof Johansson
• [GIT PULL V5 5/7] ARM: kirkwood platform_data changes for v3.7   Olof Johansson
• [GIT PULL] Patches surrounding DT development due for ARM-SoC   Olof Johansson
• [GIT PULL V5 0/7] ARM: kirkwood/dove/mvebu changes for v3.7   Olof Johansson
• [PATCH v3 1/2] ARM: Remove bcmring NAND driver   Olof Johansson
• linux-next: Tree for Sept 24 (irqchip)   Olof Johansson
• linux-next: manual merge of the arm-soc tree with the pm tree   Olof Johansson
• [PATCH] irqchip: fill in empty Kconfig   Olof Johansson
• [PATCH] ARM: Orion5x: Fix too small coherent pool.   Olof Johansson
• [PATCH 1/2] ARM: Kirkwood: ehci-orion: Add device tree binding   Olof Johansson
• [PATCH] ARM: ux500: 8500: update I2C sleep states pinctrl   Olof Johansson
• [GIT PULL] ARM: SoC: one more bug fix for 3.6   Olof Johansson
• ARM SoC tree, Was: Re: [PATCH 05/12] ARM: ixp4xx: use __iomem for MMIO   Olof Johansson
• [GIT PULL 4/4] Samsung DT for v3.7   Olof Johansson
• [GIT PULL][for 3.7] pull request on dt2 branch from arch-pxa   Olof Johansson
• [GIT PULL 1/3] omap clock late patches for v3.7 merge window   Olof Johansson
• [GIT PULL 3/3] omap arch timer late changes for v3.7 merge window   Olof Johansson
• [GIT PULL 2/3] omap platform and board related late patches for v3.7 merge window   Olof Johansson
• [GIT PULL] dove late fixes for v3.7   Olof Johansson
• [PATCH] arm: vt8500: Fixup for missing gpio.h   Olof Johansson
• [PATCH] ATA: sata_mv: Fix warnings when no PCI   Olof Johansson
• [GIT PULL] ARM: LPC32xx: DTS updates #2   Olof Johansson
• [GIT PULL] ARM: LPC32xx: Core updates #2   Olof Johansson
• [GIT PULL] ep93xx-fixes for 3.7   Olof Johansson
• [PATCH] ARM: mvebu: fix build breaks from multi-platform conversion   Olof Johansson
• [PATCH] ARM: add v7 multi-platform defconfig   Olof Johansson
• [PATCH V5 4/6] arm: mvebu: add L2 cache support   Olof Johansson
• [GIT PULL] ARM: mvebu: cache-l2x0 DT for v3.7   Olof Johansson
• [PATCH] [ARM] Build failure CONFIG_ARCH_KIRKWOOD_DT relies on CACHE_FEROCEON_L2   Olof Johansson
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH] ARM: ux500: Provide SMSC911x fixed-regulator when not booting DT   Lee Jones
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH] ARM: ux500: Provide SMSC911x fixed-regulator when not booting DT   Lee Jones
• [PATCH] ARM: ux500: Provide SMSC911x fixed-regulator when not booting DT   Lee Jones
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 2/2] serial: pl011: delete reset callback   Lee Jones
• [PATCH 2/2] serial: pl011: delete reset callback   Lee Jones
• [PATCH 1/2] serial: pl011: delete dangling bug flag   Lee Jones
• [PATCH 00/19] First HREF Device Tree enablement patch-set   Lee Jones
• [PATCH 01/19] ARM: ux500: Add skeleton Device Tree for the HREF reference board   Lee Jones
• [PATCH 02/19] ARM: ux500: Add UART support to the HREF Device Tree   Lee Jones
• [PATCH 03/19] ARM: ux500: Pass SDI DMA information though AUX_DATA to MMCI   Lee Jones
• [PATCH 04/19] ARM: ux500: Add SDI (MMC) support to the HREF Device Tree   Lee Jones
• [PATCH 05/19] ARM: ux500: Stop registering HREF's SDI devices from platform data   Lee Jones
• [PATCH 06/19] ARM: ux500: Add nodes for the MSP into the HREF Device Tree   Lee Jones
• [PATCH 07/19] ARM: ux500: Add all encompassing sound node to the HREF Device Tree   Lee Jones
• [PATCH 08/19] ARM: ux500: Stop registering Audio devices for HREF when DT is enabled   Lee Jones
• [PATCH 09/19] ARM: ux500: Enable SSP (SPI) for HREF when booting Device Tree   Lee Jones
• [PATCH 10/19] ARM: ux500: Remove redundant #gpio-cell properties from HREF and Snowball DT   Lee Jones
• [PATCH 11/19] ARM: ux500: Add all known I2C sub-device nodes to the HREF DT   Lee Jones
• [PATCH 12/19] i2c-nomadik: Register sub-devices when passed via Device Tree   Lee Jones
• [PATCH 13/19] ARM: ux500: Stop registering I2C sub-devices for HREF when DT is enabled   Lee Jones
• [PATCH 14/19] ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT   Lee Jones
• [PATCH 15/19] mfd: Don't convert just one IRQ using irqdomain if a range is provided   Lee Jones
• [PATCH 16/19] mfd: Provide the tc3589x with its own IRQ domain   Lee Jones
• [PATCH 17/19] mfd: Enable the tc3589x for Device Tree   Lee Jones
• [PATCH 18/19] gpio: Provide the tc3589x GPIO expander driver with an IRQ domain   Lee Jones
• [PATCH 19/19] gpio: Enable the tc3298x GPIO expander driver for Device Tree   Lee Jones
• [PATCH 04/19] ARM: ux500: Add SDI (MMC) support to the HREF Device Tree   Lee Jones
• [PATCH 15/19] mfd: Don't convert just one IRQ using irqdomain if a range is provided   Lee Jones
• [PATCH 00/19] First HREF Device Tree enablement patch-set   Lee Jones
• [PATCH 15/19] mfd: Don't convert just one IRQ using irqdomain if a range is provided   Lee Jones
• [PATCH 00/19] First HREF Device Tree enablement patch-set   Lee Jones
• [PATCH 07/17] Documentation: Define the MSP Driver Device Tree bindings   Lee Jones
• [PATCH 06/17] Documentation: Define the MOP500 Audio Machine Driver Device Tree bindings   Lee Jones
• [PATCH 05/17] ASoC: Ux500: Minor coding layout changes   Lee Jones
• [PATCH 06/22] ASoC: Ux500: Enable ux500 MSP driver for Device Tree   Lee Jones
• [PATCH 05/22] ASoC: Ux500: Enable MOP500 driver for Device Tree   Lee Jones
• [PATCH 01/17] ASoC: Ux500: Move MSP pinctrl setup into the MSP driver   Lee Jones
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Lee Jones
• [PATCH 18/19] gpio: Provide the tc3589x GPIO expander driver with an IRQ domain   Lee Jones
• [PATCH 12/19] i2c-nomadik: Register sub-devices when passed via Device Tree   Lee Jones
• [PATCH 12/19] i2c-nomadik: Register sub-devices when passed via Device Tree   Lee Jones
• [PATCH 14/19] ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT   Lee Jones
• [PATCH 11/19] ARM: ux500: Add all known I2C sub-device nodes to the HREF DT   Lee Jones
• [PATCH 12/19] i2c-nomadik: Register sub-devices when passed via Device Tree   Lee Jones
• [PATCH 10/19] ARM: ux500: Remove redundant #gpio-cell properties from HREF and Snowball DT   Lee Jones
• [PATCH 09/19] ARM: ux500: Enable SSP (SPI) for HREF when booting Device Tree   Lee Jones
• [PATCH 07/19] ARM: ux500: Add all encompassing sound node to the HREF Device Tree   Lee Jones
• [PATCH 06/19] ARM: ux500: Add nodes for the MSP into the HREF Device Tree   Lee Jones
• [PATCH 01/19] ARM: ux500: Add skeleton Device Tree for the HREF reference board   Lee Jones
• [PATCH 07/17] Documentation: Define the MSP Driver Device Tree bindings   Lee Jones
• [PATCH 06/17] Documentation: Define the MOP500 Audio Machine Driver Device Tree bindings   Lee Jones
• [PATCH 12/19] i2c-nomadik: Register sub-devices when passed via Device Tree   Lee Jones
• FW: [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Lee Jones
• [PATCH 4/7] mfd: ab8500-core: Apply the AB8500 CODEC's compatible string to its MFD cell   Lee Jones
• [PATCH 15/19] mfd: Don't convert just one IRQ using irqdomain if a range is provided   Lee Jones
• [PATCH 1/1] ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT   Lee Jones
• [PATCH 11/19] ARM: ux500: Add all known I2C sub-device nodes to the HREF DT   Lee Jones
• [PATCH 1/1] ARM: ux500: Fix SSP register address format   Lee Jones
• [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Lee Jones
• [RESENDING] [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Lee Jones
• [rtc-linux] [PATCH 1/1] drivers/rtc/rtc-ab8500.c: Revoke Device Tree enablement   Lee Jones
• [PATCH 12/19] i2c-nomadik: Register sub-devices when passed via Device Tree   Lee Jones
• Pull request question for Mark (ASoC)   Lee Jones
• [GIT PULL] Patches surrounding DT development due for ARM-SoC   Lee Jones
• Pull request question for Mark (ASoC)   Lee Jones
• [GIT PULL] MOP500 Audio patches due for ASoC   Lee Jones
• [PATCH 1/7] ASoC: Ux500: Move MSP pinctrl setup into the MSP driver   Lee Jones
• [PATCH 2/7] ASoC: Ux500: Enable MOP500 driver for Device Tree   Lee Jones
• [PATCH 3/7] ASoC: Ux500: Enable ux500 MSP driver for Device Tree   Lee Jones
• [PATCH 4/7] ASoC: codecs: Enable AB8500 CODEC for Device Tree   Lee Jones
• [PATCH 5/7] ASoC: Ux500: Minor coding layout changes   Lee Jones
• [PATCH 6/7] Documentation: Define the MOP500 Audio Machine Driver Device Tree bindings   Lee Jones
• [PATCH 7/7] Documentation: Define the MSP Driver Device Tree bindings   Lee Jones
• [GIT PULL] Patches surrounding DT development due for ARM-SoC   Lee Jones
• [PATCH 01/32] ARM: ux500: Rename db8500.dtsi to dbx5x0.dtsi to encompass the u9500, u8540 and u9540   Lee Jones
• [PATCH 02/32] ARM: ux500: Clean-up temporary Device Tree enablement helpers   Lee Jones
• [PATCH 03/32] ARM: ux500: Pass PMU platform data due for Perf though AUXDATA   Lee Jones
• [PATCH 04/32] Documentation: Add the AB8500 CODEC device to the MFD AB8500 doc   Lee Jones
• [PATCH 05/32] of/irq: Create stub for of_irq_find_parent when !CONFIG_OF   Lee Jones
• [PATCH 06/32] ARM: ux500: Identify the PRCMU as an interrupt controller   Lee Jones
• [PATCH 07/32] ARM: ux500: Force AB8500 to use the GIC as its interrupt controller   Lee Jones
• [PATCH 08/32] Revert "input: ab8500-ponkey: Create AB8500 domain IRQ mapping"   Lee Jones
• [PATCH 09/32] ARM: ux500: Remove unused snowball_of_platform_devs struct   Lee Jones
• [PATCH 10/32] ARM: ux500: Match Power-On-Key MFD and DTS compatible strings   Lee Jones
• [PATCH 11/32] drivers/rtc/rtc-ab8500.c: Revoke Device Tree enablement   Lee Jones
• [PATCH 12/32] ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices   Lee Jones
• [PATCH 13/32] ARM: ux500: Add skeleton Device Tree for the HREF reference board   Lee Jones
• [PATCH 14/32] ARM: ux500: Add UART support to the HREF Device Tree   Lee Jones
• [PATCH 15/32] ARM: ux500: Pass SDI DMA information though AUX_DATA to MMCI   Lee Jones
• [PATCH 16/32] ARM: ux500: Clean-up MSP platform code   Lee Jones
• [PATCH 17/32] ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree   Lee Jones
• [PATCH 18/32] ARM: ux500: Fork MSP platform registration for step-by-step DT enablement   Lee Jones
• [PATCH 19/32] ARM: ux500: Pass MSP DMA platform data though AUXDATA   Lee Jones
• [PATCH 20/32] ARM: ux500: Stop registering the MOP500 Audio driver from platform code   Lee Jones
• [PATCH 21/32] ARM: ux500: Remove platform registration of MSP devices   Lee Jones
• [PATCH 22/32] ARM: ux500: Rename MSP board file to something more meaningful   Lee Jones
• [PATCH 23/32] ARM: ux500: Add nodes for the MSP into Device Tree   Lee Jones
• [PATCH 24/32] ARM: ux500: Add all encompassing sound node to the Snowball Device Tree   Lee Jones
• [PATCH 25/32] ARM: ux500: Stop registering Audio devices for HREF when DT is enabled   Lee Jones
• [PATCH 26/32] ARM: ux500: Stop registering I2C sub-devices for HREF when DT is enabled   Lee Jones
• [PATCH 27/32] ARM: ux500: Add all known I2C sub-device nodes to the HREF DT   Lee Jones
• [PATCH 28/32] ARM: ux500: Add nodes for the MSP into the HREF Device Tree   Lee Jones
• [PATCH 29/32] ARM: ux500: Add all encompassing sound node to the HREF Device Tree   Lee Jones
• [PATCH 30/32] ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT   Lee Jones
• [PATCH 31/32] ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT   Lee Jones
• [PATCH 32/32] ARM: ux500: Fix SSP register address format   Lee Jones
• [RESENDING] [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Lee Jones
• [GIT PULL] MOP500 Audio patches due for ASoC   Lee Jones
• [PATCH 1/1] mfd: Provide the PRCMU with its own IRQ domain   Lee Jones
• [GIT PULL] Patches surrounding DT development due for ARM-SoC   Lee Jones
• [PATCH] ARM: ux500: Move regulator-name properties out to board DTS files   Lee Jones
• [PATCH] ARM: ux500: Fix initialisation order for UIBs   Lee Jones
• [GIT PULL] MOP500 Audio patches due for ASoC   Lee Jones
• [PATCH 0/7] Next instalment of Device Tree work for ST-Ericsson   Lee Jones
• [PATCH 1/7] ARM: ux500: Elaborate on SDI device node names in Device Tree   Lee Jones
• [PATCH 2/7] ARM: ux500: Add SDI (MMC) support to the HREF Device Tree   Lee Jones
• [PATCH 3/7] ARM: ux500: Correct Snowball's external SD/MMC slot's bus width   Lee Jones
• [PATCH 4/7] ARM: ux500: Create a DTS hierarchy for ST-Ericsson's HREF boards   Lee Jones
• [PATCH 5/7] ARM: ux500: Create a Device Tree for early HREFs   Lee Jones
• [PATCH 6/7] ARM: ux500: Add support for gpio-keys and Proximity Sensor for HREF   Lee Jones
• [PATCH 7/7] ARM: ux500: Remove platform specific device registration when DT is enabled   Lee Jones
• [GIT PULL] MOP500 Audio patches due for ASoC   Lee Jones
• [PATCH 1/3] gpio: 74x164: Add support for the daisy-chaining   Gabor Juhos
• Adding new board to Kernel   Josenivaldo Benito Junior
• Adding new board to Kernel   Josenivaldo Benito Junior
• [PATCH v2] ARM: Build dtb files in all target   Greg KH
• [PATCH v3 00/23] OMAP UART patches   Greg KH
• [PATCH v3 03/23] serial: omap: don't access the platform_device   Greg KH
• [PATCH v3 20/23] serial: omap: fix software flow control   Greg KH
• [PATCH v4 00/21] OMAP UART Patches   Greg KH
• [PATCH v2] serial: omap: fix compile breakage   Greg KH
• [PATCH] serial: omap: fix compile breakage   Greg KH
• [PATCH] serial: mxs-auart: put the device when exit or error   Greg KH
• [PATCH v2] /dev/mem: use phys_addr_t for physical addresses   Greg KH
• [PATCH] USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq   Greg KH
• [PATCH] USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq   Greg KH
• [PATCH v3 0/4] lis3: lis3lv02d_i2c: Add device tree support   Greg KH
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Greg KH
• [PATCH v3 0/4] lis3: lis3lv02d_i2c: Add device tree support   Greg KH
• [PATCH v3 0/4] lis3: lis3lv02d_i2c: Add device tree support   Greg KH
• [PATCH] USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq   Greg KH
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Imre Kaloz
• [PATCH] ARM: dma-mapping: Fix potential memory leak in atomic_pool_init()   Sachin Kamat
• [PATCH 03/10] msm: iommu: Convert to clk_prepare/unprepare   Saravana Kannan
• [PATCH 05/10] ARM: msm: Remove custom clk_set_flags() API   Saravana Kannan
• [PATCH 06/10] ARM: msm: Remove custom clk_set_{max,min}_rate() API   Saravana Kannan
• [RFC PATCH 00/10] Use common clk drivers for DaVinci   Karicheri, Muralidharan
• [linux-keystone] Re: [PATCH v1 01/12] clk: davinci - add Main PLL clock driver   Karicheri, Muralidharan
• [REMINDER: PATCH 1/1] mtd:nand:clk: preparation for switch to common clock framework   Karicheri, Muralidharan
• [REMINDER: PATCH 1/1] spi:clk: preparation for switch to common clock framework   Karicheri, Muralidharan
• [linux-keystone] Re: [PATCH 01/13] clk: davinci - add Main PLL clock driver   Karicheri, Muralidharan
• Fwd: [PATCH v9 07/13] ARM: SoC: convert ux500 to SoC descriptor   Srinidhi Kasagar
• [PATCH 1/2] ARM: Exynos4: Put PCM, Slimbus, Spdif clocks to off state   Chander Kashyap
• [PATCH 2/2] ARM: SAMSUNG: Add check for NULL in clock interface   Chander Kashyap
• [RFC] [PATCH 0/2] ARM: EXYNOS4: Add new cpuidle state   Chander Kashyap
• [RFC] [PATCH 1/2] ARM: Exynos4: CPUIDLE: Add generic function for exynos4 cpuidle   Chander Kashyap
• [RFC] [PATCH 2/2] ARM: EXYNOS4: CPUIDLE: Add C2 state   Chander Kashyap
• [PATCH 2/2] ARM: SAMSUNG: Add check for NULL in clock interface   Chander Kashyap
• [PATCH 1/2] ARM: Exynos4: Put PCM, Slimbus, Spdif clocks to off state   Chander Kashyap
• pxa:spitz_pm.c: commit b6eede11 breaks spitz resume under certain conditions.   Marko Katić
• pxa:spitz_pm.c: commit b6eede11 breaks spitz resume under certain conditions.   Marko Katić
• [PATCH] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support   Vasily Khoruzhick
• [PATCH v2] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support   Vasily Khoruzhick
• [PATCH] ARM: pxa: hx4700: Fix backlight PWM device number   Vasily Khoruzhick
• [PATCH] ARM: pxa: hx4700: Fix backlight PWM device number   Vasily Khoruzhick
• [PATCH 1/2] ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip   Eunki Kim
• [PATCH 2/2] gpio: samsung: Fix input mode setting function for GPIO int   Eunki Kim
• [PATCH 1/2] ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip   Eunki Kim
• [PATCH 1/2] ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip   Eunki Kim
• [PATCH] gpio: samsung: Update documentation   Kukjin Kim
• [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Kukjin Kim
• [PATCH v2 0/2] ARM: Exynos4-DT: Enable pinctrl driver support   Kukjin Kim
• [PATCH 1/2] ARM: exynos: delete redundant HAVE_SCHED_CLOCK option in Kconfig   Kukjin Kim
• [PATCH] ARM: Samsung: Remove unused code for the clocks debug-fs interface   Kukjin Kim
• [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Kukjin Kim
• [PATCH v2] gpio: samsung: add devicetree init for s3c24xx arches   Kukjin Kim
• [PATCH 0/2] ARM: EXYNOS: Set the capability of pdm0 and pdm1 as DMA_PRIVATE   Kukjin Kim
• [PATCH v2] gpio: samsung: add devicetree init for s3c24xx arches   Kukjin Kim
• [PATCH] ARM: dts: exynos4: Enable serial controllers on Origen and SMDKV310   Kukjin Kim
• [PATCH v2 2/5] ARM: Exynos4: dts: Specify address and size cells for i2c controllers   Kukjin Kim
• [PATCH v2 3/5] ARM: Exynos4: Add OF compatibility lookups for Exynos4 i2c adapters   Kukjin Kim
• [PATCH v2 4/5] ARM: EXYNOS: Increase maximum possible memory bank size to 512MiB   Kukjin Kim
• [PATCH v2 5/5] ARM: Exynos: Add basic dts file for Samsung Trats board   Kukjin Kim
• [PATCH 0/3] ARM: dts: Exynos4 dts reorganization   Kukjin Kim
• [PATCH 15/16] ARM: samsung: move platform_data definitions   Kukjin Kim
• [PATCH v9 05/13] ARM: SoC: convert Exynos4 to SoC descriptor   Kukjin Kim
• [PATCH V4] ARM: EXYNOS5: Add bus clock and set parent clock for FIMD   Kukjin Kim
• [PATCH 0/3] ARM: dts: Exynos4 dts reorganization   Kukjin Kim
• [PATCH] ARM: EXYNOS: Use non-secure MDMA1   Kukjin Kim
• [PATCH 1/7] ARM: samsung: Remove unused fields from FIMC and CSIS platform data   Kukjin Kim
• [PATCH 2/7] ARM: samsung: Change __s5p_mipi_phy_control() function signature   Kukjin Kim
• [PATCH 3/7] ARM: EXYNOS: Change MIPI-CSIS device regulator supply names   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Use spin_lock_{irqsave,irqrestore} in clk_set_rate   Kukjin Kim
• [PATCH] ARM: dts: use uart2 for console on smdkv310 and smdk5250   Kukjin Kim
• [GIT PULL] Samsung fixes-3 for v3.6   Kukjin Kim
• [GIT PULL] Samsung fixes-3 for v3.6   Kukjin Kim
• [GIT PULL] Samsung fixes-3 for v3.6   Kukjin Kim
• [GIT PULL] Samsung fixes-3 for v3.6   Kukjin Kim
• [PATCH] ARM: dts: use uart2 for console on smdkv310 and smdk5250   Kukjin Kim
• [GIT PULL 1/7] Samsung cleanup for v3.7   Kukjin Kim
• [GIT PULL 2/7] Samsung gpio for v3.7   Kukjin Kim
• [GIT PULL 3/7] Samsung pinctrl for v3.7   Kukjin Kim
• [GIT PULL 4/7] Samsung gscaler for v3.7   Kukjin Kim
• [GIT PULL 5/7] Samsung board for v3.7   Kukjin Kim
• [GIT PULL 6/7] Samsung cleanup fimd header for v3.7   Kukjin Kim
• [GIT PULL 7/7] Samsung for v3.7   Kukjin Kim
• [PATCH V5] ARM: EXYNOS5: Add bus clock for FIMD   Kukjin Kim
• [PATCH 2/2] ARM: SAMSUNG: Add check for NULL in clock interface   Kukjin Kim
• [PATCH 1/2] ARM: Exynos4: Put PCM, Slimbus, Spdif clocks to off state   Kukjin Kim
• [PATCH 3/4] arm/dts: exynos4: Add DTS file for ODROID-X   Kukjin Kim
• [PATCH v3] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support   Kukjin Kim
• [PATCH v2 5/5] ARM: Exynos: Add basic dts file for Samsung Trats board   Kukjin Kim
• [PATCH 1/2] ARM: Exynos4: Put PCM, Slimbus, Spdif clocks to off state   Kukjin Kim
• [PATCH] ARM: EXYNOS: no duplicate mask/unmask in eint0_15   Kukjin Kim
• [PATCH 0/6] pinctrl: samsung: Various fixes   Kukjin Kim
• [PATCH 0/6] pinctrl: samsung: Various fixes   Kukjin Kim
• [GIT PULL 1/4] Samsung fixes for v3.7   Kukjin Kim
• [GIT PULL 2/4] Samsung pinctrl-2 for v3.7   Kukjin Kim
• [GIT PULL 3/4] Samsung devel for v3.7   Kukjin Kim
• [GIT PULL 4/4] Samsung DT for v3.7   Kukjin Kim
• [GIT PULL 4/4] Samsung DT for v3.7   Kukjin Kim
• [PATCH V2 3/3] ARM: EXYNOS: Add drm-device node to the dtsi file   Kukjin Kim
• [PATCH v4 0/3] ARM: Exynos: Add support for MSHC controller   Kukjin Kim
• [GIT PULL 4/4] Samsung DT for v3.7   Kukjin Kim
• [PATCH 01/10] ARM: KVM: Keep track of currently running vcpus   Min-gyu Kim
• [PATCH 13/15] KVM: ARM: Handle guest faults in KVM   Min-gyu Kim
• [PATCH 13/15] KVM: ARM: Handle guest faults in KVM   Min-gyu Kim
• [PATCH 1/2] ARM: Exynos4: Put PCM, Slimbus, Spdif clocks to off state   Sangbeom Kim
• [PATCH V2] ASoC: SAMSUNG: Add DT support for i2s   Sangbeom Kim
• [PATCH] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support   Taehun Kim
• [PATCH] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support   Taehun Kim
• [PATCH v2] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support   Taehun Kim
• [PATCH v2] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support   Taehun Kim
• [PATCH v3] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support   Taehun Kim
• [RFC 2/3] Fix "ASoC: dmaengine: Don't use runtime private data for dmaengine data"   Russell King
• [RFC 3/3] ASoC: first stab at converting OMAP PCM driver to use dmaengine   Russell King
• [PATCH] ARM: Dove: allow PCI to be disabled   Russell King
• [RFC 1/3] ARM: move serial_sa1100.h header file to linux/platform_data   Russell King
• [RFC 2/3] ARM: move udc_pxa2xx.h to linux/platform_data   Russell King
• [RFC 3/3] ARM/AVR32: get rid of serial_at91.h   Russell King
• [PATCH] ARM: ensure vm_struct has its phys_addr member filled in   Russell King
• [PATCH] ARM: optimize memset_io()/memcpy_fromio()/memcpy_toio()   Russell King
• [PATCH 00/15] KVM/ARM Implementation   Avi Kivity
• [GIT PULL] Update LZO compression   Andi Kleen
• [PATCH 4/4] can: c_can: Add d_can suspend resume support   Marc Kleine-Budde
• [PATCH 3/4] ARM: AM33XX: board-generic: Add of_dev_auxdata to pass d_can raminit   Marc Kleine-Budde
• [PATCH 2/4] can: c_can: Add d_can raminit support   Marc Kleine-Budde
• [PATCH 1/4] can: c_can: Adopt pinctrl support   Marc Kleine-Budde
• [PATCH 4/4] can: c_can: Add d_can suspend resume support   Marc Kleine-Budde
• [PATCH 3/4] ARM: AM33XX: board-generic: Add of_dev_auxdata to pass d_can raminit   Marc Kleine-Budde
• [PATCH 2/4] can: c_can: Add d_can raminit support   Marc Kleine-Budde
• [PATCH 1/4] can: c_can: Adopt pinctrl support   Marc Kleine-Budde
• [PATCH v2 0/4] can: c_can: Add suspend/resume and pinctrl support   Marc Kleine-Budde
• [PATCH RESEND v5 3/3] arm/dts: AM33XX: Add D_CAN device tree data   Marc Kleine-Budde
• [PATCH v2 0/4] can: c_can: Add suspend/resume and pinctrl support   Marc Kleine-Budde
• [PATCH v2 00/11] chipidea/imx: add otg support and some bug fix   Marc Kleine-Budde
• [PATCH v2 0/4] can: c_can: Add suspend/resume and pinctrl support   Marc Kleine-Budde
• [PATCH v5 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Marc Kleine-Budde
• [PATCH 4/4] can: c_can: Add d_can suspend resume support   Marc Kleine-Budde
• [PATCH 4/4] can: c_can: Add d_can suspend resume support   Marc Kleine-Budde
• [PATCH v3] USB: mxs-phy: add basic otg support   Marc Kleine-Budde
• [PATCH 1/4] usb: phy: add a new driver for usb3 phy   Marc Kleine-Budde
• [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5   Marc Kleine-Budde
• [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5   Marc Kleine-Budde
• [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Marc Kleine-Budde
• [PATCH v2] ARM: Build dtb files in all target   Uwe Kleine-König
• [PATCH 1/3] ARM: dts: mxs: Add missing address and size cells in SSP3   Uwe Kleine-König
• [PATCH 13/25] macintosh/mediabay: add a const qualifier   Uwe Kleine-König
• [PATCH 13/25] macintosh/mediabay: add a const qualifier   Uwe Kleine-König
• linux-next: manual merge of the arm-soc tree with the i2c-embedded tree   Uwe Kleine-König
• triggering an gpio-irq on both edges   Uwe Kleine-König
• [PATCH] arch/arm/plat-mxc/ulpi.c: Remove unecessary semicolon   Uwe Kleine-König
• [PATCH] spi/imx: set the inactive state of the clock according to the clock polarity   Uwe Kleine-König
• [PATCH v6 0/3] Updated Cortex-M3 series   Uwe Kleine-König
• [PATCH v6 0/3] Updated Cortex-M3 series   Uwe Kleine-König
• [PATCH 2/6] spi: atmel: add dmaengine and dt support   Uwe Kleine-König
• [PATCH v3] ARM: i.MX35: Add kernel oftree support   Uwe Kleine-König
• [PATCH v6 0/3] Updated Cortex-M3 series   Uwe Kleine-König
• [PATCH 2/6] spi: atmel: add dmaengine and dt support   Uwe Kleine-König
• [PATCH v2 1/2] ARM: shmobile: sh73a0: enable PMU(Performance Monitoring Unit)   Tetsuyuki Kobayashi
• [PATCH v3 0/2] ARM: shmobile: enable PMU(Performance Monitoring Unit)   Tetsuyuki Kobayashi
• [PATCH] ARM: fix bad applied patch for arch/arm/Kconfig of stable 3.0.y tree.   Tetsuyuki Kobayashi
• [PATCH] ARM: shmobile: kzm9g: Add ERRATAs in defconfig   Tetsuyuki Kobayashi
• [PATCH v2 0/2] ARM: shmobile: enable PMU(Performance Monitoring Unit)   Tetsuyuki Kobayshi
• [PATCH v2 1/2] ARM: shmobile: sh73a0: enable PMU(Performance Monitoring Unit)   Tetsuyuki Kobayshi
• [PATCH v2 2/2] ARM: shmobile: emev2: enable PMU(Performance Monitoring Unit)   Tetsuyuki Kobayshi
• [PATCH] ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2   Tetsuyuki Kobayshi
• [PATCH v3 0/2] ARM: shmobile: enable PMU(Performance Monitoring Unit)   Tetsuyuki Kobayshi
• [PATCH v3 1/2] ARM: shmobile: sh73a0: enable PMU(Performance Monitoring Unit)   Tetsuyuki Kobayshi
• [PATCH v3 2/2] ARM: shmobile: emev2: enable PMU(Performance Monitoring Unit)   Tetsuyuki Kobayshi
• [PATCH RESEND v4 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   Koen Kooi
• [PATCH v3 4/4] arm/dts: Add tps65217 regulator DT data to am335x-bone.dts   Koen Kooi
• [PATCH v3 4/4] arm/dts: Add tps65217 regulator DT data to am335x-bone.dts   Koen Kooi
• [PATCH v7 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   Koen Kooi
• [PATCH 1/3] i2c: i2c-mux-gpio: Use devm_kzalloc instead of kzalloc   Peter Korsgaard
• [PATCH v5 3/3] ARM: dt: mmp-dma: add binding file   Vinod Koul
• [PATCH v5 1/3] dmaengine: mmp-pdma support   Vinod Koul
• [PATCH v5 2/3] dmaengine: mmp_tdma: add dt support   Vinod Koul
• [PATCH 1/2] dmaengine: at_hdmac: fix comment in atc_prep_slave_sg()   Vinod Koul
• [PATCH v5 3/3] ARM: dt: mmp-dma: add binding file   Vinod Koul
• [PATCH] mxs/dma: Enlarge the CCW descriptor area to 4 pages   Vinod Koul
• [PATCH] mxs/dma: Enlarge the CCW descriptor area to 4 pages   Vinod Koul
• [PATCH 0/2] ARM: EXYNOS: Set the capability of pdm0 and pdm1 as DMA_PRIVATE   Vinod Koul
• [PATCH 04/16] ARM: imx: move platform_data definitions   Vinod Koul
• [PATCH 03/16] ARM: ep93xx: move platform_data definitions   Vinod Koul
• [PATCH 01/16] ARM: at91: move platform_data definitions   Vinod Koul
• [PATCH v2 04/15] dmaengine: Pass no_wakeup parameter via device_prep_dma_cyclic() callback   Vinod Koul
• [PATCH v2 03/15] dmaengine: Add no_wakeup parameter to dmaengine_prep_dma_cyclic()   Vinod Koul
• [PATCH v2 03/15] dmaengine: Add no_wakeup parameter to dmaengine_prep_dma_cyclic()   Vinod Koul
• [PATCH v2 03/15] dmaengine: Add no_wakeup parameter to dmaengine_prep_dma_cyclic()   Vinod Koul
• [PATCH] mxs/dma: Enlarge the CCW descriptor area to 4 pages   Vinod Koul
• [PATCH v2 03/15] dmaengine: Add no_wakeup parameter to dmaengine_prep_dma_cyclic()   Vinod Koul
• [PATCH 1/8] DMA: PL330: use prefix in reg names to build under x86   Vinod Koul
• [PATCH v3 02/15] dmaengine: omap: Add support for pause/resume in cyclic dma mode   Vinod Koul
• [PATCH v3 00/15] ASoC: OMAP: Convert to use dmaengine   Vinod Koul
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Vinod Koul
• [alsa-devel] [PATCH v3 00/15] ASoC: OMAP: Convert to use dmaengine   Vinod Koul
• [PATCH v3 02/15] dmaengine: omap: Add support for pause/resume in cyclic dma mode   Vinod Koul
• [PATCH v3 03/15] dmaengine: Add flags parameter to dmaengine_prep_dma_cyclic()   Vinod Koul
• [PATCH v3 04/15] dmaengine: Pass flags via device_prep_dma_cyclic() callback   Vinod Koul
• [PATCH v3 05/15] dmaengine: omap-dma: Add support to suppress interrupts in cyclic mode   Vinod Koul
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Vinod Koul
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Vinod Koul
• [PATCH v2 04/15] dmaengine: Pass no_wakeup parameter via device_prep_dma_cyclic() callback   Vinod Koul
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Vinod Koul
• [RFC PATCH 10/13] spi: omap2-mcspi: dma_request_slave_channel() support for DT platforms   Vinod Koul
• [RFC PATCH 08/13] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC   Vinod Koul
• [PATCHv4 2/8] ARM: OMAP3+: voltage/pwrdm/clkdm/clock add recursive usecount tracking   Tero Kristo
• [PATCHv4 4/8] ARM: OMAP3: add manual control for mpu / core pwrdm usecounting   Tero Kristo
• [PATCH v5 0/8] ARM: OMAP2+: PM: introduce the power domains functional states   Tero Kristo
• [PATCHv7 07/12] ARM: OMAP4: PM: put all domains to OSWR during suspend   Tero Kristo
• [PATCHv8 0/5] ARM: OMAP4: core retention support   Tero Kristo
• [PATCHv8 1/5] ARM: OMAP4: PM: add errata support   Tero Kristo
• [PATCHv8 2/5] ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC control register change.   Tero Kristo
• [PATCHv8 3/5] ARM: OMAP4: suspend: Program all domains to retention   Tero Kristo
• [PATCHv8 4/5] ARM: OMAP4: PM: put all domains to OSWR during suspend   Tero Kristo
• [PATCHv8 5/5] ARM: OMAP4: retrigger localtimers after re-enabling gic   Tero Kristo
• [PATCHv4 8/8] ARM: OMAP3: do not delete per_clkdm autodeps during idle   Tero Kristo
• [PATCHv5 00/10] ARM: OMAP: PM usecounting changes   Tero Kristo
• [PATCHv5 01/10] ARM: OMAP3+: voltage/pwrdm/clkdm/clock add recursive usecount tracking   Tero Kristo
• [PATCHv5 02/10] ARM: OMAP3+: voltage: add support for voltagedomain usecounts   Tero Kristo
• [PATCHv5 03/10] ARM: OMAP3: add manual control for mpu / core pwrdm usecounting   Tero Kristo
• [PATCHv5 04/10] ARM: OMAP3: set autoidle flag for sdrc_ick   Tero Kristo
• [PATCHv5 05/10] ARM: OMAP: clockdomain: add support for preventing autodep delete   Tero Kristo
• [PATCHv5 06/10] ARM: OMAP3: do not delete per_clkdm autodeps during idle   Tero Kristo
• [PATCHv5 07/10] ARM: OMAP4: clock data: set autoidle flag for dss_fck   Tero Kristo
• [PATCHv5 08/10] ARM: OMAP4: hwmod: add support for hwmod autoidle flag   Tero Kristo
• [PATCHv5 09/10] ARM: OMAP4: hwmod data: set mpu hwmod modulemode to hwauto   Tero Kristo
• [PATCHv5 10/10] ARM: OMAP4: clock data: flag hw controlled clocks as autoidle   Tero Kristo
• [PATCHv5 00/10] ARM: OMAP: PM usecounting changes   Tero Kristo
• [PATCHv5 02/10] ARM: OMAP3+: voltage: add support for voltagedomain usecounts   Tero Kristo
• [PATCHv5 00/10] ARM: OMAP: PM usecounting changes   Tero Kristo
• [PATCHv6 00/11]: ARM: OMAP: PM usecounting changes   Tero Kristo
• [PATCHv6 01/11] ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable   Tero Kristo
• [PATCHv6 02/11] ARM: OMAP3+: voltage/pwrdm/clkdm/clock add recursive usecount tracking   Tero Kristo
• [PATCHv6 03/11] ARM: OMAP3+: voltage: add support for voltagedomain usecounts   Tero Kristo
• [PATCHv6 04/11] ARM: OMAP3: add manual control for mpu / core pwrdm usecounting   Tero Kristo
• [PATCHv6 05/11] ARM: OMAP3: set autoidle flag for sdrc_ick   Tero Kristo
• [PATCHv6 06/11] ARM: OMAP: clockdomain: add support for preventing autodep delete   Tero Kristo
• [PATCHv6 07/11] ARM: OMAP3: do not delete per_clkdm autodeps during idle   Tero Kristo
• [PATCHv6 08/11] ARM: OMAP4: clock data: set autoidle flag for dss_fck   Tero Kristo
• [PATCHv6 09/11] ARM: OMAP4: hwmod: add support for hwmod autoidle flag   Tero Kristo
• [PATCHv6 10/11] ARM: OMAP4: hwmod data: set mpu hwmod modulemode to hwauto   Tero Kristo
• [PATCHv6 11/11] ARM: OMAP4: clock data: flag hw controlled clocks as autoidle   Tero Kristo
• [PATCHv7 00/21] ARM: OMAP3+: auto retention support   Tero Kristo
• [PATCHv7 01/21] ARM: OMAP3+: PM: VP: use uV for max and min voltage limits   Tero Kristo
• [PATCHv7 02/21] ARM: OMAP: voltage: renamed vp_vddmin and vp_vddmax fields   Tero Kristo
• [PATCHv7 03/21] ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains   Tero Kristo
• [PATCHv7 04/21] ARM: OMAP3: VC: calculate ramp times   Tero Kristo
• [PATCHv7 05/21] ARM: OMAP4: voltage: add support for VOLTSETUP_x_OFF register   Tero Kristo
• [PATCHv7 06/21] ARM: OMAP4: VC: calculate ramp times   Tero Kristo
• [PATCHv7 07/21] ARM: OMAP: add support for oscillator setup   Tero Kristo
• [PATCHv7 08/21] ARM: OMAP3+: vp: use new vp_params for calculating vddmin and vddmax   Tero Kristo
• [PATCHv7 09/21] ARM: OMAP3+: voltage: use oscillator data to calculate setup times   Tero Kristo
• [PATCHv7 10/21] ARM: OMAP: TWL: change the vddmin / vddmax voltages to spec   Tero Kristo
• [PATCHv7 11/21] TEMP: ARM: OMAP3: beagle rev-c4: enable OPP6   Tero Kristo
• [PATCHv7 12/21] ARM: OMAP: beagle: set oscillator startup time to 10ms for rev c4   Tero Kristo
• [PATCHv7 13/21] ARM: OMAP3: vc: auto_ret / auto_off support   Tero Kristo
• [PATCHv7 14/21] ARM: OMAP3+: voltage: remove unused volt_setup_time parameter   Tero Kristo
• [PATCHv7 15/21] ARM: OMAP4: vc: fix channel configuration   Tero Kristo
• [PATCHv7 16/21] ARM: OMAP4: VC: setup I2C parameters based on board data   Tero Kristo
• [PATCHv7 17/21] ARM: OMAP4: TWL: enable high speed mode for PMIC communication   Tero Kristo
• [PATCHv7 18/21] ARM: OMAP4: OPP: add OMAP4460 definitions   Tero Kristo
• [PATCHv7 19/21] ARM: OMAP3+: PM: introduce a central pmic control   Tero Kristo
• [PATCHv7 20/21] ARM: OMAP2+ PM: Add support for TPS62361   Tero Kristo
• [PATCHv7 21/21] ARM: OMAP4: vc: auto retention support   Tero Kristo
• [PATCHv7 17/21] ARM: OMAP4: TWL: enable high speed mode for PMIC communication   Tero Kristo
• [PATCH v2 1/6] usb: pxa27x_udc: remove IRQ_USB define   Greg Kroah-Hartman
• [PATCH 1/6] staging: drm/imx: Add i.MX drm core support   Greg Kroah-Hartman
• [PATCH] staging: ste_rmi4: remove gpio.h include   Greg Kroah-Hartman
• [PATCH] staging: ste_rmi4: remove gpio.h include   Greg Kroah-Hartman
• [PATCH 1/2] PCI: Annotate pci_fixup_irqs with __devinit   Greg Kroah-Hartman
• [PATCH 21/24] serial: ks8695: use __iomem pointers for MMIO   Greg Kroah-Hartman
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Greg Kroah-Hartman
• [PATCH 17/34] usb: ehci-mxc: remove unneeded mach/hardware.h inclusion   Greg Kroah-Hartman
• [PATCH v2 1/2] PCI: Keep pci_fixup_irqs() around after init   Greg Kroah-Hartman
• [PATCH v7 0/11] KGDB/KDB FIQ (NMI) debugger   Greg Kroah-Hartman
• [PATCH v7 0/11] KGDB/KDB FIQ (NMI) debugger   Greg Kroah-Hartman
• [PATCH v7 0/11] KGDB/KDB FIQ (NMI) debugger   Greg Kroah-Hartman
• [PATCH 6/6] staging: drm/imx: Add TODO   Greg Kroah-Hartman
• [PATCH] Add i.MX IPUv3 base/KMS driver to the staging tree   Greg Kroah-Hartman
• [RFC 1/3] ARM: move serial_sa1100.h header file to linux/platform_data   Greg Kroah-Hartman
• [RFC 2/3] ARM: move udc_pxa2xx.h to linux/platform_data   Greg Kroah-Hartman
• [RFC 3/3] ARM/AVR32: get rid of serial_at91.h   Greg Kroah-Hartman
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Greg Kroah-Hartman
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Greg Kroah-Hartman
• [PATCH v9 0/11] KGDB/KDB FIQ (NMI) debugger   Greg Kroah-Hartman
• [PATCH v2 06/11] USB: mxs-phy: add basic otg support   Heikki Krogerus
• [alsa-devel] [RFC update 0/2] dmaengine/ASoC: omap: Enable element mode in cyclic DMA   Janusz Krzysztofik
• [alsa-devel] [RFC update 0/2] dmaengine/ASoC: omap: Enable element mode in cyclic DMA   Janusz Krzysztofik
• [alsa-devel] [PATCH v3 00/15] ASoC: OMAP: Convert to use dmaengine   Janusz Krzysztofik
• [PATCH] ASoC: ams-delta: Convert to use snd_soc_register_card()   Janusz Krzysztofik
• [PATCH 04/29] ARM: OMAP1: Move board-ams-delta.h from plat to mach   Janusz Krzysztofik
• [Query] Does u-boot processes dtb file   Viresh Kumar
• [Query] Does u-boot processes dtb file   Viresh Kumar
• [PATCH] ARM: EXYNOS: no duplicate mask/unmask in eint0_15   Daniel Kurtz
• [PATCH v2 2/2] ARM: da850/omap-l138: Add EVM specific code for VPIF to work   Prabhakar Lad
• [PATCH v2 2/2] ARM: da850/omap-l138: Add EVM specific code for VPIF to work   Prabhakar Lad
• [PATCH v3 0/2] ARM: davinci: da850/omap-l138: add support for VPIF driver   Prabhakar Lad
• [PATCH v3 1/2] ARM: da850/omap-l138: Add SoC related definitions for VPIF   Prabhakar Lad
• [PATCH v3 2/2] ARM: da850/omap-l138: Add EVM specific code for VPIF to work   Prabhakar Lad
• [PATCH 0/2] Replace the obsolete preset API by timings API   Prabhakar Lad
• [PATCH] arch/arm/mach-davinci/board-dm646x-evm.c: Remove unecessary   Prabhakar Lad
• [PATCH] media: davinci: vpif: display: separate out subdev from output   Prabhakar Lad
• [PATCH v2] media: davinci: vpif: display: separate out subdev from output   Prabhakar Lad
• [PATCH v2] media: davinci: vpif: display: separate out subdev from output   Prabhakar Lad
• [PATCH v2] media: davinci: vpif: display: separate out subdev from output   Prabhakar Lad
• [PATCH 1/2] dm644x: replace the obsolete preset API by the timings API.   Prabhakar Lad
• [PATCH 1/2] dm644x: replace the obsolete preset API by the timings API.   Prabhakar Lad
• [PATCH RFC] clk: use spinlock for clk_get_rate   Mark Langsdorf
• [PATCH 02/12] ata: mark probe function as __devinit rather than __init   Mark Langsdorf
• [PATCH] mfd: Implement devicetree support for AB8500 fg   Francesco Lavra
• mfd: Implement devicetree support for AB8500 Btemp   Francesco Lavra
• [PATCH 07/11] tty/serial: Add kgdb_nmi driver   Francesco Lavra
• [PATCH] arch/arm/mach-s3c24xx/mach-h1940.c: delete double assignment   Julia Lawall
• [PATCH v3] serial: pl011: honour serial aliases in device tree   Matthew Leach
• [PATCH] ARM: decompressor: reset SCTLR.TRE for VMSA ARMv7 cores   Matthew Leach
• [RFC PATCH 0/2] ARM: kexec: Add dtb kexec support   Matthew Leach
• [RFC PATCH 1/2] ARM: kexec: scan for dtb magic in segments   Matthew Leach
• [RFC PATCH 2/2] ARM: kexec: Check segment memory addresses   Matthew Leach
• [PATCH 0/2] ARM: kexec: Add dtb kexce support   Matthew Leach
• [PATCH 1/2] ARM: kexec: scan for dtb magic in segments   Matthew Leach
• [PATCH 2/2] ARM: kexec: Check segment memory addresses   Matthew Leach
• GCC 4.6.x miscompiling arm-linux?   Matthew Leach
• GCC 4.6.x miscompiling arm-linux?   Matthew Leach
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Ming Lei
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Ming Lei
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Ming Lei
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Ming Lei
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Ming Lei
• [PATCH 0/2] hwmon: kirkwood: Add DT bindings to gpio-fan for DNS-32[05]   Jamie Lentin
• [PATCH 1/2] hwmon: Add devicetree bindings to gpio-fan   Jamie Lentin
• [PATCH 2/2] ARM: kirkwood: Use devicetree to define DNS-32[05] fan   Jamie Lentin
• [PATCH V2 0/2] hwmon: kirkwood: Add DT bindings to gpio-fan for DNS-32[05]   Jamie Lentin
• [PATCH V2 1/2] hwmon: Add devicetree bindings to gpio-fan   Jamie Lentin
• [PATCH V2 2/2] ARM: kirkwood: Use devicetree to define DNS-32[05] fan   Jamie Lentin
• [PATCH] ARM: kirkwood: Trim excess #includes in board-dnskw.c   Jamie Lentin
• [PATCH V2 1/2] hwmon: Add devicetree bindings to gpio-fan   Jamie Lentin
• [PATCH V3 1/2] hwmon: Add devicetree bindings to gpio-fan   Jamie Lentin
• [Workshop-2011] Notes from the KS/2012 Media Workshop - part1   Guennadi Liakhovetski
• [PATCH 04/16] ARM: imx: move platform_data definitions   Guennadi Liakhovetski
• [RFC v5] V4L DT bindings   Guennadi Liakhovetski
• [PATCH 04/16] ARM: imx: move platform_data definitions   Guennadi Liakhovetski
• [PATCH] media: add V4L2 DT binding documentation   Guennadi Liakhovetski
• [PATCH] media: add V4L2 DT binding documentation   Guennadi Liakhovetski
• [PATCH] media: add V4L2 DT binding documentation   Guennadi Liakhovetski
• [PATCH 26/34] media: mx2_camera: remove dead code in mx2_camera_add_device   Guennadi Liakhovetski
• [PATCH 12/34] media: mx1_camera: remove the driver   Guennadi Liakhovetski
• [PATCH 27/34] media: mx2_camera: use managed functions to clean up code   Guennadi Liakhovetski
• [PATCH 28/34] media: mx2_camera: remove mach/hardware.h inclusion   Guennadi Liakhovetski
• [PATCH 14/34] dma: ipu: rename mach/ipu.h to include/linux/dma/ipu-dma.h   Guennadi Liakhovetski
• [PATCH 28/34] media: mx2_camera: remove mach/hardware.h inclusion   Guennadi Liakhovetski
• [PATCH] media: add V4L2 DT binding documentation   Guennadi Liakhovetski
• Ack possibility for '[PATCH] SPI: OMAP: remove unnecessary includes of plat/clock.h' ?   Grant Likely
• [PATCH 05/17] ASoC: Ux500: Minor coding layout changes   Ola Lilja
• [PATCH 06/17] Documentation: Define the MOP500 Audio Machine Driver Device Tree bindings   Ola Lilja
• [PATCH 07/17] Documentation: Define the MSP Driver Device Tree bindings   Ola Lilja
• [PATCH 01/17] ASoC: Ux500: Move MSP pinctrl setup into the MSP driver   Ola Lilja
• [RESENDING] [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Ola Lilja
• [PATCH] ARM: ux500: Fix build error due to missing include of asm/pmu.h in cpu-db8500.c   Axel Lin
• [PATCH] ARM: ux500: Fix build error due to missing include of asm/pmu.h in cpu-db8500.c   Axel Lin
• [PATCH] ARM: ep93xx: Fix build error due to 'SZ_32M' undeclared   Axel Lin
• [PATCH] ARM: ep93xx: Fix build error due to 'SZ_32M' undeclared   Axel Lin
• [PATCH] ARM: OMAP: OMAP_DEBUG_LEDS needs to select LEDS_CLASS   Axel Lin
• [PATCH] ARM: OMAP: OMAP_DEBUG_LEDS needs to select LEDS_CLASS   Axel Lin
• [RFC] arm/mm: add a protection when flushing anonymous pages   Jason Lin
• [RFC] arm/mm: add a protection when flushing anonymous pages   Jason Lin
• [PATCH 1/6] ARM: move ARCH config definitions into mach dirs   Tony Lindgren
• [PATCH] ARM: OMAP4: Fix array size for irq_target_cpu   Tony Lindgren
• [PATCH 4/4] [RFC] ARM: treewide: manually change more mach-*/*.h includes   Tony Lindgren
• [PATCH 7/9] ARM: OMAP2+: Prepare for irqs.h removal   Tony Lindgren
• [PATCH 7/9] ARM: OMAP2+: Prepare for irqs.h removal   Tony Lindgren
• [PATCH 8/9] ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQ   Tony Lindgren
• [PATCH 2/4] ARM: OMAP: Split plat/hardware.h, introduce local hardware.h and soc.h for omap2+   Tony Lindgren
• [PATCH] ARM: OMAP4: Fix array size for irq_target_cpu   Tony Lindgren
• [PATCH 5/9] ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: PRCM/hwmod: some fixes for 3.6-rc   Tony Lindgren
• [PATCH RESEND 3/4] ARM: AM33XX: board-generic: Add of_dev_auxdata to pass d_can raminit   Tony Lindgren
• [PATCH RESEND 1/4] can: c_can: Adopt pinctrl support   Tony Lindgren
• [PATCH RESEND 2/4] can: c_can: Add d_can raminit support   Tony Lindgren
• [PATCH v2 0/4] can: c_can: Add suspend/resume and pinctrl support   Tony Lindgren
• [PATCH v8 1/3] ARM: OMAP2/3: hwmod data: add gpmc   Tony Lindgren
• [PATCH] ARM: OMAP2+: select PINCTRL in Kconfig   Tony Lindgren
• [PATCH v5 1/5] arm/dts: AM33XX: Add basic pinctrl device tree data   Tony Lindgren
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Tony Lindgren
• [PATCH RESEND v5 1/3] arm/dts: AM33XX: Add basic pinctrl device tree data   Tony Lindgren
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Tony Lindgren
• [PATCH 0/5] Enable pinctrl-single for omap2/3/4   Tony Lindgren
• [PATCH 1/5] arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm   Tony Lindgren
• [PATCH 2/5] arm/dts: Add pinctrl driver entries for omap2/3/4   Tony Lindgren
• [PATCH 3/5] ARM: OMAP2+: select PINCTRL in Kconfig   Tony Lindgren
• [PATCH 4/5] arm/dts: Mux uart pins for omap4-sdp   Tony Lindgren
• [PATCH 5/5] omap-serial: Request pins using pinctrl framework   Tony Lindgren
• [PATCH 5/5] omap-serial: Request pins using pinctrl framework   Tony Lindgren
• [PATCH 1/3] arm: omap: hwmod: add a new addr space in otg for writing to control module   Tony Lindgren
• [PATCH v2 2/8] ARM/dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2   Tony Lindgren
• [PATCH v2 6/8] ARM/dts: omap3-beagle: Enable audio support   Tony Lindgren
• [PATCH 6/9] ARM: OMAP: Move gpio.h to include/linux/platform_data   Tony Lindgren
• [PATCH v6 10/10] ARM: OMAP2+: tusb6010: generic timing calculation   Tony Lindgren
• [PATCH 1/3] gpio-twl4030: get platform data from device tree   Tony Lindgren
• [PATCH v2 0/2] gpio-twl4030: add new device tree properties   Tony Lindgren
• [PATCH 0/2] ARM: omap/dts: Add support for Gumstix Overo with Tobi expansion   Tony Lindgren
• Converting OMAP's custom vram allocator   Tony Lindgren
• [PATCH v6 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   Tony Lindgren
• [PATCH v3 10/14] ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIO   Tony Lindgren
• [PATCH 5/5] omap-serial: Request pins using pinctrl framework   Tony Lindgren
• [GIT PULL] omap fixes for v3.6-rc4   Tony Lindgren
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Tony Lindgren
• [PATCH v7 1/3] arm/dts: AM33XX: Add basic pinctrl device tree data   Tony Lindgren
• [PATCH v7 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   Tony Lindgren
• [PATCH v7 0/3] arm/dts: Add device tree data for AM33XX devices   Tony Lindgren
• [PATCH] ARM: dts: OMAP4: Add reg and interrupts for every nodes   Tony Lindgren
• [PATCH 5/5] omap-serial: Request pins using pinctrl framework   Tony Lindgren
• [PATCH] ARM: dts: OMAP4: Add reg and interrupts for every nodes   Tony Lindgren
• [PATCH] serial: omap: fix compile breakage   Tony Lindgren
• [PATCH] serial: omap: Request pins using pinctrl framework   Tony Lindgren
• [PATCH 5/5] omap-serial: Request pins using pinctrl framework   Tony Lindgren
• [PATCH] serial: omap: fix DeviceTree boot   Tony Lindgren
• [PATCH] serial: omap: Request pins using pinctrl framework   Tony Lindgren
• [RFC RESEND 1/4] arm/dts: OMAP: Add timer nodes   Tony Lindgren
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Tony Lindgren
• [PATCH v8 0/3] GPMC driver conversion   Tony Lindgren
• [PATCH 08/10] ARM: OMAP: Clean-up timer posted mode support   Tony Lindgren
• [PATCH v2] gpio/omap: fix possible memory leak in omap2_gpio_dev_init()   Tony Lindgren
• [PATCH v3 1/8] ARM/dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Tony Lindgren
• [PATCH 0/5] arm: omap: debug-leds: few changes   Tony Lindgren
• [PATCH v3 1/8] ARM/dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Tony Lindgren
• [PATCH] ARM: dts: AM33XX: fix gpio node numbering to match hardware   Tony Lindgren
• [GIT PULL] OMAP devicetree for 3.7   Tony Lindgren
• [PATCH] ARM: OMAP2+: mux: add support for PAD wakeup event handler   Tony Lindgren
• [PATCH] ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write   Tony Lindgren
• [PATCH 08/10] ARM: OMAP: Clean-up timer posted mode support   Tony Lindgren
• [PATCH 00/17] Resend of mach-omap2 sparse IRQ and hardware.h cleanup   Tony Lindgren
• [PATCH 01/17] ARM: OMAP1: Move define of OMAP_LCD_DMA to dma.h   Tony Lindgren
• [PATCH 02/17] ARM: OMAP1: Define OMAP1_INT_I2C locally   Tony Lindgren
• [PATCH 03/17] ARM: OMAP2+: Make INTCPS_NR_IRQS local for mach-omap2/irq.c   Tony Lindgren
• [PATCH 04/17] ARM: OMAP2+: Remove unused nand_irq for GPMC   Tony Lindgren
• [PATCH 05/17] ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end   Tony Lindgren
• [PATCH 06/17] ARM: OMAP: Move gpio.h to include/linux/platform_data   Tony Lindgren
• [PATCH 07/17] Input: omap-keypad: Remove dependencies to mach includes   Tony Lindgren
• [PATCH 08/17] W1: OMAP HDQ1W: Remove dependencies to mach/hardware.h   Tony Lindgren
• [PATCH 09/17] serial/8250: Limit the omap workarounds to omap1   Tony Lindgren
• [PATCH 10/17] staging: tidspbridge: Prepare for irqs.h removal   Tony Lindgren
• [PATCH 11/17] ARM: OMAP2+: Prepare for irqs.h removal   Tony Lindgren
• [PATCH 12/17] ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQ   Tony Lindgren
• [PATCH 13/17] ARM: OMAP1: Move plat/irqs.h to mach/irqs.h   Tony Lindgren
• [PATCH 14/17] ARM: OMAP: Remove unused old gpio-switch.h   Tony Lindgren
• [PATCH 15/17] ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+   Tony Lindgren
• [PATCH 16/17] ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2   Tony Lindgren
• [PATCH 17/17] ARM: OMAP1: Move SoC specific headers from plat to mach for omap1   Tony Lindgren
• [PATCH 07/17] Input: omap-keypad: Remove dependencies to mach includes   Tony Lindgren
• [PATCH] ARM: OMAP2+: mux: add support for PAD wakeup event handler   Tony Lindgren
• [PATCH v8 0/3] GPMC driver conversion   Tony Lindgren
• [PATCH 08/10] ARM: OMAP: Clean-up timer posted mode support   Tony Lindgren
• [PATCH 09/17] serial/8250: Limit the omap workarounds to omap1   Tony Lindgren
• [PATCH 13/16] ARM: omap: move platform_data definitions   Tony Lindgren
• [PATCH 07/17] Input: omap-keypad: Remove dependencies to mach includes   Tony Lindgren
• [PATCH 1/2] spi: omap2-mcspi: add pinctrl support   Tony Lindgren
• [PATCH 2/2] ARM: OMAP2+: Enable pinctrl dummy states   Tony Lindgren
• [PATCH 2/2] ARM: OMAP2+: Enable pinctrl dummy states   Tony Lindgren
• [PATCH v6 10/10] ARM: OMAP2+: tusb6010: generic timing calculation   Tony Lindgren
• [PATCH] ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write   Tony Lindgren
• [PATCH 2/2] ARM: OMAP2+: Enable pinctrl dummy states   Tony Lindgren
• [PATCH 2/2] ARM: AM33XX: hwmod: Add OMAP_INTC_START offset to all module int nos   Tony Lindgren
• [PATCH 1/2] ARM: AM33XX: hwmod: Remove platform specific header files   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: some Makefile cleanup for 3.7   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: clean up smatch warnings and unwrap strings, for 3.7   Tony Lindgren
• [GIT PULL v2] ARM: AM33xx: hwmod/clock: add hwmod data and some clock/hwmod fixes for 3.7   Tony Lindgren
• [GIT PULL] ARM: OMAP: omap_device updates for v3.7   Tony Lindgren
• [GIT PULL 2/7] omap device changes for v3.7 merge window   Tony Lindgren
• [GIT PULL 1/7] omap non-critical fixes for v3.7 merge window   Tony Lindgren
• [GIT PULL 3/7] omap gpmc cleanup for v3.7 merge window   Tony Lindgren
• [GIT PULL 4/7] omap custom atag removal for v3.7 merge window   Tony Lindgren
• [GIT PULL 5/7] omap sparse irq and local hardware.h cleanup for v3.7 merge window   Tony Lindgren
• [GIT PULL 7/7] am33xx hwmod data for v3.7 merge window   Tony Lindgren
• [GIT PULL 6/7] omap makefile and sparse cleanup for v3.7 merge window   Tony Lindgren
• [GIT PULL 1/7] omap non-critical fixes for v3.7 merge window   Tony Lindgren
• [GIT PULL 2/7] omap device changes for v3.7 merge window   Tony Lindgren
• [GIT PULL 3/7] omap gpmc cleanup for v3.7 merge window   Tony Lindgren
• [GIT PULL 1/7] omap non-critical fixes for v3.7 merge window   Tony Lindgren
• [GIT PULL 4/7] omap custom atag removal for v3.7 merge window   Tony Lindgren
• [GIT PULL 5/7] omap sparse irq and local hardware.h cleanup for v3.7 merge window   Tony Lindgren
• [GIT PULL 6/7] omap makefile and sparse cleanup for v3.7 merge window   Tony Lindgren
• [GIT PULL 7/7] am33xx hwmod data for v3.7 merge window   Tony Lindgren
• [GIT PULL 5/7] omap sparse irq and local hardware.h cleanup for v3.7 merge window   Tony Lindgren
• [PATCH 17/24] ARM: OMAP: use __iomem pointers for MMIO   Tony Lindgren
• [PATCH 17/24] ARM: OMAP: use __iomem pointers for MMIO   Tony Lindgren
• [PATCH] ASoC: ams-delta: Convert to use snd_soc_register_card()   Tony Lindgren
• [GIT PULL 1/7] omap non-critical fixes for v3.7 merge window   Tony Lindgren
• linux-next: build failure after merge of the final tree (arm-soc tree related)   Tony Lindgren
• linux-next: build failure after merge of the final tree (arm-soc tree related)   Tony Lindgren
• [PATCH v2 1/2] spi: omap2-mcspi: add pinctrl support   Tony Lindgren
• [PATCH v2 2/2] ARM: OMAP2+: Enable pinctrl dummy states   Tony Lindgren
• [PATCH] mfd: Fix compile for twl-core.c by removing cpu_is_omap usage   Tony Lindgren
• linux-next: build failure after merge of the final tree (arm-soc tree related)   Tony Lindgren
• linux-next: manual merge of the arm-soc tree with the staging tree   Tony Lindgren
• [PATCH 17/24] ARM: OMAP: use __iomem pointers for MMIO   Tony Lindgren
• [PATCH 00/29] Move OMAP2+ over to use COMMON clock   Tony Lindgren
• [PATCH 1/1] drivers: bus: Move the OMAP interconnect driver to drivers/bus/   Tony Lindgren
• [PATCH] mfd: Fix compile for twl-core.c by removing cpu_is_omap usage   Tony Lindgren
• [PATCH] ARM: OMAP: SmartReflex: pass device dependent data via platform data   Tony Lindgren
• [PATCH] mfd: Fix compile for twl-core.c by removing cpu_is_omap usage   Tony Lindgren
• [PATCH v6 10/10] ARM: OMAP2+: tusb6010: generic timing calculation   Tony Lindgren
• [PATCH v6 10/10] ARM: OMAP2+: tusb6010: generic timing calculation   Tony Lindgren
• [PATCH] ARM: OMAP1: Include gpio-omap.h for board-h2 and board-h3   Tony Lindgren
• [GIT PULL] omap fixes for linux next for v3.7 merge window   Tony Lindgren
• [PATCH] mfd: Fix compile for twl-core.c by removing cpu_is_omap usage   Tony Lindgren
• [GIT PULL] omap device tree changes for v3.7 merge window   Tony Lindgren
• [REPOST PATCH v2 1/2] spi: omap2-mcspi: add pinctrl support   Tony Lindgren
• [PATCH v2 7/9] ARM: OMAP: iommu: optimize save and restore routines   Tony Lindgren
• [PATCH 17/24] ARM: OMAP: use __iomem pointers for MMIO   Tony Lindgren
• [PATCH 1/1] drivers: bus: Move the OMAP interconnect driver to drivers/bus/   Tony Lindgren
• [PATCH 00/29] More omap header moves for common zImage support   Tony Lindgren
• [PATCH 01/29] ARM: OMAP: Remove unused param.h   Tony Lindgren
• [PATCH 02/29] ARM: OMAP: Remove smp.h   Tony Lindgren
• [PATCH 03/29] ARM: OMAP1: Make plat/mux.h omap1 only   Tony Lindgren
• [PATCH 04/29] ARM: OMAP1: Move board-ams-delta.h from plat to mach   Tony Lindgren
• [PATCH 05/29] ARM: OMAP2+: Make id.h local   Tony Lindgren
• [PATCH 06/29] ARM: OMAP1: Move keypad.h from plat to mach   Tony Lindgren
• [PATCH 07/29] ARM: OMAP1: Move lcd_mipid.h from plat to mach   Tony Lindgren
• [PATCH 08/29] ARM: OMAP2+: Make board-zoom.h local   Tony Lindgren
• [PATCH 09/29] ARM: OMAP2+: Make am35xx.h local   Tony Lindgren
• [PATCH 10/29] ARM: OMAP2+: Make board-rx51.h local   Tony Lindgren
• [PATCH 11/29] ARM: OMAP2+: Make ctrl_module_core_44xx.h local   Tony Lindgren
• [PATCH 12/29] ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local   Tony Lindgren
• [PATCH 13/29] ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local   Tony Lindgren
• [PATCH 14/29] ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local   Tony Lindgren
• [PATCH 15/29] ARM: OMAP2+: Make omap-secure.h local   Tony Lindgren
• [PATCH 16/29] ARM: OMAP2+: Make omap-wakeupgen.h local   Tony Lindgren
• [PATCH 17/29] ARM: OMAP1: Move board-sx1.h from plat to mach   Tony Lindgren
• [PATCH 18/29] ARM: OMAP1: Move board-voiceblue.h from plat to mach   Tony Lindgren
• [PATCH 19/29] ARM: OMAP2+: Make debug-devices.h local   Tony Lindgren
• [PATCH 20/29] ARM: OMAP1: Move flash.h from plat to mach   Tony Lindgren
• [PATCH 21/29] ARM: OMAP2+: Make gpmc-smc91x.h local   Tony Lindgren
• [PATCH 22/29] ARM: OMAP2+: Make gpmc-smsc911x.h local   Tony Lindgren
• [PATCH 23/29] ARM: OMAP2+: Make hdq1w.h local   Tony Lindgren
• [PATCH 24/29] ARM: OMAP1: Move irda.h from plat to mach   Tony Lindgren
• [PATCH 25/29] ARM: OMAP2+: Make l3_2xxx.h local   Tony Lindgren
• [PATCH 26/29] ARM: OMAP2+: Make l3_3xxx.h local   Tony Lindgren
• [PATCH 27/29] ARM: OMAP2+: Make l4_2xxx.h local   Tony Lindgren
• [PATCH 28/29] ARM: OMAP2+: Make l4_3xxx.h local   Tony Lindgren
• [PATCH 29/29] ARM: OMAP2+: Make omap4-keypad.h local   Tony Lindgren
• [PATCH 04/29] ARM: OMAP1: Move board-ams-delta.h from plat to mach   Tony Lindgren
• [PATCH 04/29] ARM: OMAP1: Move board-ams-delta.h from plat to mach   Tony Lindgren
• [PATCH 08/29] ARM: OMAP2+: Make board-zoom.h local   Tony Lindgren
• [PATCH 06/29] ARM: OMAP1: Move keypad.h from plat to mach   Tony Lindgren
• [PATCH 07/29] ARM: OMAP1: Move lcd_mipid.h from plat to mach   Tony Lindgren
• arm-soc/for-next: fixup compile after platform_data move   Tony Lindgren
• linux-next: manual merge of the arm-soc tree with the sound-asoc tree   Tony Lindgren
• [RFC PATCH 10/13] spi: omap2-mcspi: dma_request_slave_channel() support for DT platforms   Tony Lindgren
• [PATCH 2/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   Tony Lindgren
• [RFC PATCH 07/13] mmc: omap_hsmmc: dma_request_slave_channel() support for DT platforms   Tony Lindgren
• [GIT PULL] omap header cleanup to make headers local for v3.7 merge window   Tony Lindgren
• [PATCH V2 0/7] ARM: OMAP2+: Add device-tree support for timers   Tony Lindgren
• [PATCH 1/1] drivers: bus: Move the OMAP interconnect driver to drivers/bus/   Tony Lindgren
• [PATCH v7 00/11] OMAP-GPMC: generic time calc, prepare for driver   Tony Lindgren
• [PATCH v7 00/11] OMAP-GPMC: generic time calc, prepare for driver   Tony Lindgren
• [RFC PATCH 10/13] spi: omap2-mcspi: dma_request_slave_channel() support for DT platforms   Tony Lindgren
• [PATCH] ARM: OMAP2+: Makefile.boot: Add am335x evm and bone targets   Tony Lindgren
• [PATCH v2 resend] ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus   Tony Lindgren
• [PATCH 2/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   Tony Lindgren
• rcu self-detected stall messages on OMAP3, 4 boards   Tony Lindgren
• [GIT PULL] ARM: OMAP5: Enable arch timer support   Tony Lindgren
• [GIT PULL] ARM: OMAP: hwmod/PMU/PRCM patches for 3.7   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: clock patches for 3.7   Tony Lindgren
• [GIT PULL] ARM: OMAP: hwmod/PMU/PRCM patches for 3.7   Tony Lindgren
• [GIT PULL] ARM: OMAP: hwmod/PMU/PRCM patches for 3.7   Tony Lindgren
• [GIT PULL] ARM: OMAP: hwmod/PMU/PRCM patches for 3.7   Tony Lindgren
• [GIT PULL] ARM: OMAP: hwmod/PMU/PRCM patches for 3.7   Tony Lindgren
• [GIT PULL] ARM: OMAP: hwmod/PMU/PRCM patches for 3.7   Tony Lindgren
• [GIT PULL] ARM: OMAP: hwmod/PMU/PRCM patches for 3.7   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: PRCM/runtime PM patches for 3.7   Tony Lindgren
• [PATCH v3] ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus   Tony Lindgren
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Tony Lindgren
• [PATCH] ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints   Tony Lindgren
• [PATCH] ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6   Tony Lindgren
• [PATCH] arm: make FORCE_MAX_ZONEORDER configurable for TI AM33XX   Tony Lindgren
• [PATCH v3] ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus   Tony Lindgren
• [PATCH] ARM: am33xx: clk: Update clkdev table to add mcasp alias   Tony Lindgren
• [GIT PULL 1/3] omap clock late patches for v3.7 merge window   Tony Lindgren
• [GIT PULL 2/3] omap platform and board related late patches for v3.7 merge window   Tony Lindgren
• [GIT PULL 3/3] omap arch timer late changes for v3.7 merge window   Tony Lindgren
• [GIT PULL 1/3] omap clock late patches for v3.7 merge window   Tony Lindgren
• [PATCH] arm: make FORCE_MAX_ZONEORDER configurable for TI AM33XX   Tony Lindgren
• [GIT PULL 2/3] omap platform and board related late patches for v3.7 merge window   Tony Lindgren
• [PATCH V2] ARM: OMAP: counter: add locking to read_persistent_clock   Tony Lindgren
• [GIT PULL 2/3] omap platform and board related late patches for v3.7 merge window   Tony Lindgren
• [PATCH V2] ARM: OMAP: counter: add locking to read_persistent_clock   Tony Lindgren
• [PATCH v2] arm: make FORCE_MAX_ZONEORDER configurable for TI AM33XX   Tony Lindgren
• [RFC PATCH 0/3] ARM: use C pre-processor with dtc   Tony Lindgren
• [PATCH 2/3] iommu/omap: Merge iommu2.h into iommu.h   Tony Lindgren
• [PATCH 2/3] iommu/omap: Merge iommu2.h into iommu.h   Tony Lindgren
• [PATCH 2/4] ARM: OMAP: DMA: Move plat/dma hearder to platform_data/dma-omap   Tony Lindgren
• [PATCH 2/4] ARM: OMAP: DMA: Move plat/dma hearder to platform_data/dma-omap   Tony Lindgren
• [PATCH] arm: omap: move OMAP USB platform data to <linux/platform_data/omap-usb.h>   Tony Lindgren
• [PATCH 2/4] ARM: OMAP: DMA: Move plat/dma hearder to platform_data/dma-omap   Tony Lindgren
• [PATCH 3/4] ARM: OMAP: Move omap_reserve() locally to mach-omap1/2   Tony Lindgren
• [GIT PULL 2/3] omap platform and board related late patches for v3.7 merge window   Tony Lindgren
• [PATCH v2] ARM: Build dtb files in all target   Russell King - ARM Linux
• [PATCH v2] ARM: Build dtb files in all target   Russell King - ARM Linux
• [PATCH v2] ARM: Build dtb files in all target   Russell King - ARM Linux
• [PATCH 1/6] ARM: move ARCH config definitions into mach dirs   Russell King - ARM Linux
• [PATCH v2] ARM: Build dtb files in all target   Russell King - ARM Linux
• [PATCH v2] ARM: Build dtb files in all target   Russell King - ARM Linux
• [PATCH] gpio/omap: fix possible memory leak in omap2_gpio_dev_init()   Russell King - ARM Linux
• [RFC 0/3] Initial stab at converting OMAP ASoC support to DMA engine   Russell King - ARM Linux
• [alsa-devel] [RFC 1/3] ASoC: dmaengine: Don't use runtime private data for dmaengine data   Russell King - ARM Linux
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Russell King - ARM Linux
• linux-next: manual merge of the arm-soc tree with the arm-current tree   Russell King - ARM Linux
• [alsa-devel] [RFC 1/3] ASoC: dmaengine: Don't use runtime private data for dmaengine data   Russell King - ARM Linux
• [PATCH v2 20/31] arm64: User access library function   Russell King - ARM Linux
• [PATCH v2 20/31] arm64: User access library function   Russell King - ARM Linux
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Russell King - ARM Linux
• [PATCH 2/2] ARM: kexec: Check segment memory addresses   Russell King - ARM Linux
• DMA: get data count of descriptor in dmaengine   Russell King - ARM Linux
• [PATCH] DMA: get current descriptor data transfer count   Russell King - ARM Linux
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Russell King - ARM Linux
• [PATCH v4 1/2] ARM: new cache maintenance api for iommu   Russell King - ARM Linux
• [PATCH v4 2/2] OMAP:IOMMU:flush L1 and L2 caches   Russell King - ARM Linux
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Russell King - ARM Linux
• [PATCH] ARM: Dove: allow PCI to be disabled   Russell King - ARM Linux
• [PATCH] clk: Make the managed clk functions generically available   Russell King - ARM Linux
• [PATCH] clk: Make the managed clk functions generically available   Russell King - ARM Linux
• [PATCH] clk: Make the managed clk functions generically available   Russell King - ARM Linux
• [PATCH] ARM: Dove: allow PCI to be disabled   Russell King - ARM Linux
• [PATCH] ARM: Dove: allow PCI to be disabled   Russell King - ARM Linux
• [PATCH] ARM: Fix build warning in do_alignment.   Russell King - ARM Linux
• [PATCH] ARM: add back in KS8695 based SnapGear board entries   Russell King - ARM Linux
• [PATCH v3 31/31] arm64: MAINTAINERS update   Russell King - ARM Linux
• [RFC PATCH] ARM: l2x0: avoid spinlock for sync op on pl310   Russell King - ARM Linux
• [PATCH] clk: Make the managed clk functions generically available   Russell King - ARM Linux
• [PATCH] ARM: avoid undef on ARCH_HAS_READ_CURRENT_TIMER   Russell King - ARM Linux
• [PATCH] ARM: avoid undef on ARCH_HAS_READ_CURRENT_TIMER   Russell King - ARM Linux
• [PATCH] ARM: suspend: use flush range instead of flush all   Russell King - ARM Linux
• [PATCH] ARM: suspend: use flush range instead of flush all   Russell King - ARM Linux
• [PATCH 1/3] ARM: Remove bcmring NAND driver   Russell King - ARM Linux
• [PATCH 11/11] ASoC: omap-pcm: Convert to use dmaengine   Russell King - ARM Linux
• [PATCH] perf: Use raw_smp_processor_id insted of smp_processor_id   Russell King - ARM Linux
• [RFC PATCH] ARM: mm: ADD descriptor string to CONFIG_DMA_ADDR_64BIT_T   Russell King - ARM Linux
• [PATCH v5 2/2] OMAP:IOMMU:flush L1 and L2 caches   Russell King - ARM Linux
• [PATCH] perf: Use raw_smp_processor_id insted of smp_processor_id   Russell King - ARM Linux
• [PATCH] ARM: suspend: use flush range instead of flush all   Russell King - ARM Linux
• [RFC PATCH 1/6] ARM: mm: define LoUIS API for cache maintenance ops   Russell King - ARM Linux
• [RFC PATCH 1/6] ARM: mm: define LoUIS API for cache maintenance ops   Russell King - ARM Linux
• [RFC PATCH 4/6] ARM: kernel: update cpu_suspend code to use cache LoUIS operations   Russell King - ARM Linux
• [PATCH v2 03/15] dmaengine: Add no_wakeup parameter to dmaengine_prep_dma_cyclic()   Russell King - ARM Linux
• [PATCH 2/2] arm: Add ARM ERRATA 782773 workaround   Russell King - ARM Linux
• [PATCH] mxs/dma: Enlarge the CCW descriptor area to 4 pages   Russell King - ARM Linux
• Alignment problems: arm_memblock_steal() + dma_declare_coherent_memory()   Russell King - ARM Linux
• [PATCH v2 03/15] dmaengine: Add no_wakeup parameter to dmaengine_prep_dma_cyclic()   Russell King - ARM Linux
• [PATCH 22/24] scsi: eesox: use __iomem pointers for MMIO   Russell King - ARM Linux
• [PATCH 24/24] net: seeq: use __iomem pointers for MMIO   Russell King - ARM Linux
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Russell King - ARM Linux
• [PATCH 22/24] scsi: eesox: use __iomem pointers for MMIO   Russell King - ARM Linux
• [PATCH V5 2/5] ARM: bcm2835: add interrupt controller driver   Russell King - ARM Linux
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Russell King - ARM Linux
• [PATCH V5 2/5] ARM: bcm2835: add interrupt controller driver   Russell King - ARM Linux
• [PATCH V3 1/6] arm: cache-l2x0: make outer_cache_fns a field of l2x0_of_data   Russell King - ARM Linux
• [PATCH V3 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Russell King - ARM Linux
• [PATCH] clk: Make the managed clk functions generically available   Russell King - ARM Linux
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Russell King - ARM Linux
• [PATCH 06/24] ARM: integrator: use __iomem pointers for MMIO   Russell King - ARM Linux
• [PATCH 06/24] ARM: integrator: use __iomem pointers for MMIO   Russell King - ARM Linux
• [PATCH] ARM: Add config option DEBUG_DECOMPRESS_KERNEL   Russell King - ARM Linux
• [PATCH v2] ARM: l2x0: make background cache ops optional for clean and flush range   Russell King - ARM Linux
• [PATCH v2] ARM: l2x0: make background cache ops optional for clean and flush range   Russell King - ARM Linux
• [PATCH 2/8] gpio: pl061 depends on ARM   Russell King - ARM Linux
• [PATCH 22/24] scsi: eesox: use __iomem pointers for MMIO   Russell King - ARM Linux
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Russell King - ARM Linux
• [PATCH v3 02/15] dmaengine: omap: Add support for pause/resume in cyclic dma mode   Russell King - ARM Linux
• [PATCH v2 04/15] dmaengine: Pass no_wakeup parameter via device_prep_dma_cyclic() callback   Russell King - ARM Linux
• [PATCH] clk: Make the managed clk functions generically available   Russell King - ARM Linux
• ARM: smp: why don't eliminate warning "Unknown IPI message 0x1"?   Russell King - ARM Linux
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Russell King - ARM Linux
• Stable branch for 3.7?   Russell King - ARM Linux
• [PATCH] clk: Make the managed clk functions generically available   Russell King - ARM Linux
• [PATCH 01/15] ARM: add mem_type prot_pte accessor   Russell King - ARM Linux
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Russell King - ARM Linux
• [PATCH 1/3] serial: pl011: safeguard against impossible baudrates   Russell King - ARM Linux
• [PATCH 3/3] serial: pl011: allow very high baudrates   Russell King - ARM Linux
• [PATCH 0/4] Fix PROT_NONE page permissions when !CPU_USE_DOMAINS   Russell King - ARM Linux
• [PATCH 3/4] ARM: mm: introduce L_PTE_VALID for page table entries   Russell King - ARM Linux
• [RFC PATCH 01/13] ARM: davinci: move private EDMA API to arm/common   Russell King - ARM Linux
• [RFC 0/3] Move some ARM header files to more appropriate locations   Russell King - ARM Linux
• [RFC PATCH 01/13] ARM: davinci: move private EDMA API to arm/common   Russell King - ARM Linux
• [RFC 2/3] ARM: move udc_pxa2xx.h to linux/platform_data   Russell King - ARM Linux
• [RFC PATCH 1/3] amba-clcd: Add Device Tree support to amba-clcd driver   Russell King - ARM Linux
• [RFC PATCH 1/3] amba-clcd: Add Device Tree support to amba-clcd driver   Russell King - ARM Linux
• [PATCH 3/3] serial: pl011: allow very high baudrates   Russell King - ARM Linux
• [PATCH 3/3] serial: pl011: allow very high baudrates   Russell King - ARM Linux
• [PATCH v3 10/17] ARM: LPAE: use phys_addr_t in switch_mm()   Russell King - ARM Linux
• [RFC PATCH 08/13] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC   Russell King - ARM Linux
• [RFC PATCH 01/13] ARM: davinci: move private EDMA API to arm/common   Russell King - ARM Linux
• [PATCH 3/3] serial: pl011: allow very high baudrates   Russell King - ARM Linux
• [PATCH 0/3] Introduce devm_clk_register()   Russell King - ARM Linux
• [PATCH] arm: add SDIV/UDIV emulation for ARMv7 processors   Russell King - ARM Linux
• [PATCH] ARM: pxa2xx: Remove EXPERIMENTAL dependency from spi-pxa2xx driver   Russell King - ARM Linux
• [PATCH 2/5] ARM: Add interface for registering and calling firmware-specific operations   Russell King - ARM Linux
• [PATCH] ARM: gic: fix irq affinity mismatch.   Russell King - ARM Linux
• [PATCH v3 RESEND 09/17] ARM: LPAE: use phys_addr_t for initrd location and size   Russell King - ARM Linux
• [PATCH v3 RESEND 08/17] ARM: LPAE: use phys_addr_t in free_memmap()   Russell King - ARM Linux
• [PATCH v3 RESEND 06/17] ARM: LPAE: use signed arithmetic for mask definitions   Russell King - ARM Linux
• [PATCH v3 RESEND 08/17] ARM: LPAE: use phys_addr_t in free_memmap()   Russell King - ARM Linux
• [PATCH v3 RESEND 08/17] ARM: LPAE: use phys_addr_t in free_memmap()   Russell King - ARM Linux
• [PATCH v3 RESEND 08/17] ARM: LPAE: use phys_addr_t in free_memmap()   Russell King - ARM Linux
• [PATCH 0/3] Introduce devm_clk_register()   Russell King - ARM Linux
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Russell King - ARM Linux
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Russell King - ARM Linux
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Russell King - ARM Linux
• [PATCH] arm: make FORCE_MAX_ZONEORDER configurable for TI AM33XX   Russell King - ARM Linux
• [PATCH] arm: make FORCE_MAX_ZONEORDER configurable for TI AM33XX   Russell King - ARM Linux
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Russell King - ARM Linux
• [PATCH v2] arm: make FORCE_MAX_ZONEORDER configurable for TI AM33XX   Russell King - ARM Linux
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Russell King - ARM Linux
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Russell King - ARM Linux
• [PATCHv5 02/10] ARM: OMAP3+: voltage: add support for voltagedomain usecounts   Russell King - ARM Linux
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Russell King - ARM Linux
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Russell King - ARM Linux
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Russell King - ARM Linux
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Russell King - ARM Linux
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Russell King - ARM Linux
• [PATCH v3 RESEND 08/17] ARM: LPAE: use phys_addr_t in free_memmap()   Russell King - ARM Linux
• [RFC PATCH 0/3] ARM: uncompress.h multi-platform enablement   Russell King - ARM Linux
• [PATCH V4 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Russell King - ARM Linux
• [RFC PATCH 0/3] ARM: uncompress.h multi-platform enablement   Russell King - ARM Linux
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Russell King - ARM Linux
• [PATCH] ARM:CPUIDLE: Fix wrongly used idle control counter   Russell King - ARM Linux
• [PATCH] ARM:CPUIDLE: Fix wrongly used idle control counter   Russell King - ARM Linux
• [GIT PULL] ARM: cache flushing LoUIS API   Russell King - ARM Linux
• [PATCH] pinctrl/nomadik: allocate IRQ descriptors dynamically   Russell King - ARM Linux
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Russell King - ARM Linux
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Russell King - ARM Linux
• [PATCH v2 1/2] usb: phy: add a new driver for usb3 phy   Russell King - ARM Linux
• [PATCH V2] spi/pl022: Simplify use of runtime pm   Russell King - ARM Linux
• [GIT PULL] ARM: cache flushing LoUIS API   Russell King - ARM Linux
• [PATCH] ARM: optimize memset_io()/memcpy_fromio()/memcpy_toio()   Russell King - ARM Linux
• [PATCH] ARM: optimize memset_io()/memcpy_fromio()/memcpy_toio()   Russell King - ARM Linux
• [GIT PULL] ARM: cache flushing LoUIS API v2   Russell King - ARM Linux
• [GIT PULL] ARM: cache flushing LoUIS API v2   Russell King - ARM Linux
• [PATCH] ARM: optimize memset_io()/memcpy_fromio()/memcpy_toio()   Russell King - ARM Linux
• [PATCH 2/4] ARM: OMAP: DMA: Move plat/dma hearder to platform_data/dma-omap   Russell King - ARM Linux
• ARM SoC tree, Was: Re: [PATCH 05/12] ARM: ixp4xx: use __iomem for MMIO   Russell King - ARM Linux
• [PATCH 3/4] ARM: OMAP: Move omap_reserve() locally to mach-omap1/2   Russell King - ARM Linux
• s3c2410 bast (== lists.arm.linux.org.uk) - appears to be broken with 3.1.8...   Russell King - ARM Linux
• s3c2410 bast (== lists.arm.linux.org.uk) - appears to be broken with 3.1.8...   Russell King - ARM Linux
• ARM SoC tree, Was: Re: [PATCH 05/12] ARM: ixp4xx: use __iomem for MMIO   Russell King - ARM Linux
• [GIT PULL] ARM: mvebu: cache-l2x0 DT for v3.7   Russell King - ARM Linux
• [PATCH 1/3] Revert "spi/pl022: fix spi-pl022 pm enable at probe"   Russell King - ARM Linux
• [PATCH 1/1] Fix segfault in DTC   Jon Loeliger
• [PATCH 1/1] Fix segfault in DTC   Jon Loeliger
• [PATCH v2] ARM: initial DTS support for km_kirkwood   Valentin Longchamp
• [PATCH 3/8] i2c: at91: use an id table for SoC dependent parameters   Warner Losh
• [PATCH 23/29] PCI, arm: kill pci_root_buses   Yinghai Lu
• [PATCHv2 0/3] remoteproc: introduce rproc recovery   Fernando Lugo
• [PATCH 0/2] OMAP: hwmod: fix hardreset handling   Omar Ramirez Luna
• [PATCH 2/2] ARM: OMAP: hwmod: revise deassert sequence   Omar Ramirez Luna
• [PATCH v2 0/9] OMAP: iommu: hwmod, reset handling and runtime PM   Omar Ramirez Luna
• [PATCH v2 1/9] ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected   Omar Ramirez Luna
• [PATCH v2 2/9] ARM: OMAP3: hwmod data: add mmu data for iva and isp   Omar Ramirez Luna
• [PATCH v2 3/9] ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Omar Ramirez Luna
• [PATCH v2 4/9] ARM: OMAP3/4: iommu: migrate to hwmod framework   Omar Ramirez Luna
• [PATCH v2 5/9] ARM: OMAP3/4: iommu: adapt to runtime pm   Omar Ramirez Luna
• [PATCH v2 6/9] ARM: OMAP: iommu: pm runtime save and restore context   Omar Ramirez Luna
• [PATCH v2 7/9] ARM: OMAP: iommu: optimize save and restore routines   Omar Ramirez Luna
• [PATCH v2 8/9] ARM: OMAP: iommu: add device tree support   Omar Ramirez Luna
• [PATCH v2 9/9] arm/dts: OMAP3/4: Add iommu nodes   Omar Ramirez Luna
• [PATCH v2 0/2] OMAP: mailbox initial device tree support   Omar Ramirez Luna
• [PATCH v2 1/2] OMAP: mailbox: add device tree support   Omar Ramirez Luna
• [PATCH v2 2/2] arm/dts: OMAP2+: Add mailbox nodes   Omar Ramirez Luna
• [PATCH v2 0/2] OMAP: mailbox initial device tree support   Omar Ramirez Luna
• [PATCH v2 7/9] ARM: OMAP: iommu: optimize save and restore routines   Omar Ramirez Luna
• [PATCH v2 0/2] OMAP: mailbox initial device tree support   Omar Ramirez Luna
• [PATCH 1/3] ARM: move debug macros to common location   Andrew Lunn
• [PATCH 1/2] ARM: Kirkwood: ehci-orion: Add device tree binding   Andrew Lunn
• [PATCH 2/2] ARM: Kirkwood: Convert all DT boards to EHCI via DT.   Andrew Lunn
• [PATCH v2] ARM: Build dtb files in all target   Andrew Lunn
• [PATCH v2 RESEND] ARM: Build dtb files in all target   Andrew Lunn
• [RFC PATCH] ARM: initial DTS support for km_kirkwood   Andrew Lunn
• [PATCH] Crypto: CESA: Add support for DT based instantiation.   Andrew Lunn
• [PATCH 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Andrew Lunn
• Dockstar fails to boot since v3.0-rc6-6-g3835d69   Andrew Lunn
• [PATCH v2] ARM: initial DTS support for km_kirkwood   Andrew Lunn
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Andrew Lunn
• [PATCH v2 RESEND] ARM: Build dtb files in all target   Andrew Lunn
• [PATCH 2/2] ARM: kirkwood: Use devicetree to define DNS-32[05] fan   Andrew Lunn
• [PATCH 1/2] hwmon: Add devicetree bindings to gpio-fan   Andrew Lunn
• sata_mv hangs up while probing on LaCie Kirkwood boards   Andrew Lunn
• [PATCH] ARM: Dove: allow PCI to be disabled   Andrew Lunn
• [PATCH V2 1/2] hwmon: Add devicetree bindings to gpio-fan   Andrew Lunn
• [PATCH] ARM: kirkwood: Trim excess #includes in board-dnskw.c   Andrew Lunn
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Andrew Lunn
• [PATCH v3 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Andrew Lunn
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Andrew Lunn
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Andrew Lunn
• [PATCH 00/11] pinctrl: mvebu: pinctrl driver   Andrew Lunn
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Andrew Lunn
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Andrew Lunn
• [PATCH v4 1/5] gpio: introduce gpio-mvebu driver for Marvell SoCs   Andrew Lunn
• [PATCH v4] Add basic address decoding support for Marvell 370/XP   Andrew Lunn
• [GIT PULL V5 0/7] ARM: kirkwood/dove/mvebu changes for v3.7   Andrew Lunn
• [PATCH] ARM: Orion5x: Fix too small coherent pool.   Andrew Lunn
• [GIT PULL V5 0/7] ARM: kirkwood/dove/mvebu changes for v3.7   Andrew Lunn
• [PATCH 1/2] ARM: Kirkwood: ehci-orion: Add device tree binding   Andrew Lunn
• [PATCH] ARM: Orion5x: Fix too small coherent pool.   Andrew Lunn
• [PATCH 2/6] ARM: dove: Fix tauros2 device tree init   Andrew Lunn
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Andrew Lunn
• [PATCH 0/6] Dove fixes for arm-soc/for-next   Andrew Lunn
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Andrew Lunn
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Andrew Lunn
• [PATCH] ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses.   Andrew Lunn
• [PATCH] ATA: sata_mv: Fix warnings when no PCI   Andrew Lunn
• Tracking down suspend/resume ext3/mmc issues on imx233   Pavel Machek
• Tracking down suspend/resume ext3/mmc issues on imx233   Pavel Machek
• [PATCH v3 0/3] DaVinci DMA engine conversion   Daniel Mack
• [PATH v3] Cleaning up the file lib/decompress_unxz.c, moving all memory helper functions, e.g. memmove, to a new common source file, lib/boot/mem.c   T Makphaibulchoke
• [PATCH] ARM: ep93xx: Fix build error due to 'SZ_32M' undeclared   Ryan Mallon
• [PATCH] ARM: ep93xx: Fix build error due to 'SZ_32M' undeclared   Ryan Mallon
• [PATCH 03/16] ARM: ep93xx: move platform_data definitions   Ryan Mallon
• [PATCH 1/2] ep93xx: Fix type error warnings in ts72xx build   Ryan Mallon
• [PATCH 2/2] ep93xx: Move ts72xx.h out of include/mach   Ryan Mallon
• [PATCH 04/24] ARM: ep93xx: use __iomem pointers for MMIO   Ryan Mallon
• [GIT PULL] ep93xx-fixes for 3.7   Ryan Mallon
• [PATCH v2 17/31] arm64: System calls handling   Catalin Marinas
• [PATCH v2 20/31] arm64: User access library function   Catalin Marinas
• [PATCH v2 20/31] arm64: User access library function   Catalin Marinas
• [PATCH v2 20/31] arm64: User access library function   Catalin Marinas
• [PATCH v3 00/31] AArch64 Linux kernel port   Catalin Marinas
• [PATCH v3 01/31] arm64: Assembly macros and definitions   Catalin Marinas
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Catalin Marinas
• [PATCH v3 03/31] arm64: Exception handling   Catalin Marinas
• [PATCH v3 04/31] arm64: MMU definitions   Catalin Marinas
• [PATCH v3 05/31] arm64: MMU initialisation   Catalin Marinas
• [PATCH v3 06/31] arm64: MMU fault handling and page table management   Catalin Marinas
• [PATCH v3 07/31] arm64: Process management   Catalin Marinas
• [PATCH v3 08/31] arm64: CPU support   Catalin Marinas
• [PATCH v3 09/31] arm64: Cache maintenance routines   Catalin Marinas
• [PATCH v3 10/31] arm64: TLB maintenance functionality   Catalin Marinas
• [PATCH v3 11/31] arm64: IRQ handling   Catalin Marinas
• [PATCH v3 12/31] arm64: Atomic operations   Catalin Marinas
• [PATCH v3 13/31] arm64: Device specific operations   Catalin Marinas
• [PATCH v3 14/31] arm64: DMA mapping API   Catalin Marinas
• [PATCH v3 15/31] arm64: SMP support   Catalin Marinas
• [PATCH v3 16/31] arm64: ELF definitions   Catalin Marinas
• [PATCH v3 17/31] arm64: System calls handling   Catalin Marinas
• [PATCH v3 18/31] arm64: VDSO support   Catalin Marinas
• [PATCH v3 19/31] arm64: Signal handling support   Catalin Marinas
• [PATCH v3 20/31] arm64: User access library functions   Catalin Marinas
• [PATCH v3 21/31] arm64: 32-bit (compat) applications support   Catalin Marinas
• [PATCH v3 22/31] arm64: Floating point and SIMD   Catalin Marinas
• [PATCH v3 23/31] arm64: Debugging support   Catalin Marinas
• [PATCH v3 24/31] arm64: Add support for /proc/sys/debug/exception-trace   Catalin Marinas
• [PATCH v3 25/31] arm64: Performance counters support   Catalin Marinas
• [PATCH v3 26/31] arm64: Miscellaneous library functions   Catalin Marinas
• [PATCH v3 27/31] arm64: Loadable modules   Catalin Marinas
• [PATCH v3 28/31] arm64: Generic timers support   Catalin Marinas
• [PATCH v3 29/31] arm64: Miscellaneous header files   Catalin Marinas
• [PATCH v3 30/31] arm64: Build infrastructure   Catalin Marinas
• [PATCH v3 31/31] arm64: MAINTAINERS update   Catalin Marinas
• [PATCH v3 17/31] arm64: System calls handling   Catalin Marinas
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Catalin Marinas
• [PATCH v3 17/31] arm64: System calls handling   Catalin Marinas
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Catalin Marinas
• [PATCH v3 17/31] arm64: System calls handling   Catalin Marinas
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Catalin Marinas
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Catalin Marinas
• [PATCH v3 08/31] arm64: CPU support   Catalin Marinas
• [PATCH v3 09/31] arm64: Cache maintenance routines   Catalin Marinas
• [PATCH v3 09/31] arm64: Cache maintenance routines   Catalin Marinas
• [PATCH v3 11/31] arm64: IRQ handling   Catalin Marinas
• [RFC PATCH] ARM: mm: ADD descriptor string to CONFIG_DMA_ADDR_64BIT_T   Catalin Marinas
• [RFC PATCH] ARM: mm: ADD descriptor string to CONFIG_DMA_ADDR_64BIT_T   Catalin Marinas
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Catalin Marinas
• [PATCH v3 00/31] AArch64 Linux kernel port   Catalin Marinas
• [PATCH v3 26/31] arm64: Miscellaneous library functions   Catalin Marinas
• [PATCH v3 21/31] arm64: 32-bit (compat) applications support   Catalin Marinas
• [PATCH v3 09/31] arm64: Cache maintenance routines   Catalin Marinas
• [PATCH v3 21/31] arm64: 32-bit (compat) applications support   Catalin Marinas
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Catalin Marinas
• [PATCH v3 09/31] arm64: Cache maintenance routines   Catalin Marinas
• [PATCH v2 13/31] arm64: Device specific operations   Catalin Marinas
• [PATCH v2 07/31] arm64: Process management   Catalin Marinas
• [PATCH v2 08/31] arm64: CPU support   Catalin Marinas
• [PATCH v2 13/31] arm64: Device specific operations   Catalin Marinas
• [PATCH v2] ARM: l2x0: make background cache ops optional for clean and flush range   Catalin Marinas
• [PATCH v2] ARM: l2x0: make background cache ops optional for clean and flush range   Catalin Marinas
• [PATCH 02/15] ARM: Add page table and page defines needed by KVM   Catalin Marinas
• [PATCH 02/15] ARM: Add page table and page defines needed by KVM   Catalin Marinas
• [PATCH 2/2] arm: Add ARM ERRATA 782773 workaround   Catalin Marinas
• [PATCH 2/2] arm: Add ARM ERRATA 782773 workaround   Catalin Marinas
• [PATCH 1/2] arm: Add ARM ERRATA 775420 workaround   Catalin Marinas
• [PATCH 1/2] arm: Add ARM ERRATA 775420 workaround   Catalin Marinas
• [PATCH 2/4] ARM: mm: don't use the access flag permissions mechanism for classic MMU   Catalin Marinas
• [PATCH 1/4] ARM: mm: use pteval_t to represent page protection values   Catalin Marinas
• [PATCH v3 RESEND 04/17] ARM: LPAE: use phys_addr_t on virt <--> phys conversion   Catalin Marinas
• [PATCH v3 RESEND 06/17] ARM: LPAE: use signed arithmetic for mask definitions   Catalin Marinas
• [PATCH v3 RESEND 07/17] ARM: LPAE: use phys_addr_t in alloc_init_pud()   Catalin Marinas
• [PATCH v3 RESEND 08/17] ARM: LPAE: use phys_addr_t in free_memmap()   Catalin Marinas
• [PATCH v3 RESEND 09/17] ARM: LPAE: use phys_addr_t for initrd location and size   Catalin Marinas
• [PATCH v3 RESEND 10/17] ARM: LPAE: use phys_addr_t in switch_mm()   Catalin Marinas
• [PATCH v3 RESEND 11/17] ARM: LPAE: use 64-bit accessors for TTBR registers   Catalin Marinas
• [PATCH v3 RESEND 12/17] ARM: LPAE: define ARCH_LOW_ADDRESS_LIMIT for bootmem   Catalin Marinas
• [PATCH v3 RESEND 13/17] ARM: LPAE: factor out T1SZ and TTBR1 computations   Catalin Marinas
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Catalin Marinas
• [PATCH v3 RESEND 14/17] ARM: LPAE: accomodate >32-bit addresses for page table base   Catalin Marinas
• [PATCH v3 RESEND 15/17] ARM: mm: use physical addresses in highmem sanity checks   Catalin Marinas
• [PATCH v3 RESEND 08/17] ARM: LPAE: use phys_addr_t in free_memmap()   Catalin Marinas
• [PATCH v3 RESEND 08/17] ARM: LPAE: use phys_addr_t in free_memmap()   Catalin Marinas
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Catalin Marinas
• [PATCH v3 RESEND 08/17] ARM: LPAE: use phys_addr_t in free_memmap()   Catalin Marinas
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Catalin Marinas
• [PATCH V5 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Catalin Marinas
• [PATCH 2/2] ARM: remove unnecessary flush of anon pages in flush(_kernel)_dcache_page()   Catalin Marinas
• [PATCH 13/15] KVM: ARM: Handle guest faults in KVM   Catalin Marinas
• [PATCH 13/15] KVM: ARM: Handle guest faults in KVM   Catalin Marinas
• [PATCH 2/2] arm: Add ARM ERRATA 782773 workaround   Catalin Marinas
• [PATCH] ARM: optimize memset_io()/memcpy_fromio()/memcpy_toio()   Catalin Marinas
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   javier Martin
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   javier Martin
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   javier Martin
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   javier Martin
• [PATCH v2] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   javier Martin
• Alignment problems: arm_memblock_steal() + dma_declare_coherent_memory()   javier Martin
• [PATCH 02/34] ASoC: mx27vis: retrieve gpio numbers from platform_data   javier Martin
• [PATCH 27/34] media: mx2_camera: use managed functions to clean up code   javier Martin
• [PATCH 26/34] media: mx2_camera: remove dead code in mx2_camera_add_device   javier Martin
• [PATCH 28/34] media: mx2_camera: remove mach/hardware.h inclusion   javier Martin
• [PATCH 25/34] dma: imx-dma: remove mach/hardware.h inclusion   javier Martin
• [PATCH 25/34] dma: imx-dma: remove mach/hardware.h inclusion   javier Martin
• [PATCH 27/34] media: mx2_camera: use managed functions to clean up code   javier Martin
• [PATCH 28/34] media: mx2_camera: remove mach/hardware.h inclusion   javier Martin
• [PATCH 29/34] mmc: mxcmmc: remove mach/hardware.h inclusion   javier Martin
• [PATCH v3] Visstrim SM10: Use mo_version to decide board video mode.   javier Martin
• [PATCH v2] ARM: Build dtb files in all target   Dave Martin
• [PATCH v3 06/25] docs: Xen ARM DT bindings   Dave Martin
• [PATCH v3 06/25] docs: Xen ARM DT bindings   Dave Martin
• [RFC PATCH 1/6] ARM: mm: define LoUIS API for cache maintenance ops   Dave Martin
• [RFC PATCH 4/6] ARM: kernel: update cpu_suspend code to use cache LoUIS operations   Dave Martin
• [PATCH v4 3/5] ARM: topology: Update cpu_power according to DT information   Dave Martin
• [RFC PATCH 1/6] ARM: mm: define LoUIS API for cache maintenance ops   Dave Martin
• [PATCH v4 06/24] docs: Xen ARM DT bindings   Dave Martin
• Bad traps for unaligned access in STM instruction   Dave Martin
• Bad traps for unaligned access in STM instruction   Dave Martin
• [RFC PATCH v2 3/5] ARM: kernel: update cpu_suspend code to use cache LoUIS operations   Dave Martin
• [RFC PATCH v2 2/5] ARM: mm: rename jump labels in v7_flush_dcache_all function   Dave Martin
• [RFC PATCH v2 2/5] ARM: mm: rename jump labels in v7_flush_dcache_all function   Dave Martin
• [RFC PATCH v2 3/5] ARM: kernel: update cpu_suspend code to use cache LoUIS operations   Dave Martin
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Dave Martin
• [Xen-devel] [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Dave Martin
• [Xen-devel] [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Dave Martin
• Mismatched aliases with DMA mappings?   Dave Martin
• Mismatched aliases with DMA mappings?   Dave Martin
• [PATCH v3 RESEND 01/17] ARM: add mechanism for late code patching   Dave Martin
• [PATCH v3 RESEND 01/17] ARM: add mechanism for late code patching   Dave Martin
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Dave Martin
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Dave Martin
• [PATCH v2 RESEND 2/2] ARM: local timers: add timer support using IO mapped register   Dave Martin
• [PATCH v3 00/31] AArch64 Linux kernel port   Jon Masters
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Jon Masters
• [kvmarm] [PATCH 10/15] KVM: ARM: World-switch implementation   Peter Maydell
• [kvmarm] [PATCH 06/15] KVM: ARM: Initial skeleton to compile KVM support   Peter Maydell
• [kvmarm] [PATCH 10/15] KVM: ARM: World-switch implementation   Peter Maydell
• [PATCH 0/1] Fix segfault in DTC   Markus Mayer
• [PATCH 1/1] Fix segfault in DTC   Markus Mayer
• [PATCH 0/1] Fix segfault in DTC   Markus Mayer
• [PATCH 0/1] Fix segfault in DTC   Markus Mayer
• [PATCH 1/1] Fix segfault in DTC   Markus Mayer
• [PATCH 1/1] Fix segfault in DTC   Markus Mayer
• [PATCH 1/1] Fix segfault in DTC   Markus Mayer
• RCU warning during UBI file system mount   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• [PATCH v2 16/31] arm64: ELF definitions   Chris Metcalf
• [PATCH v2 2/6] net: pxaficp_ir: add irq resources   Eric Miao
• [PATCH v2 1/6] usb: pxa27x_udc: remove IRQ_USB define   Eric Miao
• [PATCH] ARM: mmp: using for_each_set_bit to simplify the code   Eric Miao
• pxa:spitz_pm.c: commit b6eede11 breaks spitz resume under certain conditions.   Eric Miao
• [PATCH] ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe()   Eric Miao
• [RFC 2/3] ARM: move udc_pxa2xx.h to linux/platform_data   Eric Miao
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Antti P Miettinen
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Antti P Miettinen
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Antti P Miettinen
• [PATCH 04/10] net/macb: Fix a race in macb_start_xmit()   David Miller
• [PATCH 08/10] net/macb: macb_get_drvinfo: add GEM/MACB suffix to differentiate revision   David Miller
• [PATCH 09/10] net/macb: ethtool interface: add register dump feature   David Miller
• [PATCH 08/10] net/macb: macb_get_drvinfo: add GEM/MACB suffix to differentiate revision   David Miller
• [PATCH v2 2/6] net: pxaficp_ir: add irq resources   David Miller
• [PATCH 24/24] net: seeq: use __iomem pointers for MMIO   David Miller
• [PATCH v2 0/9] net/macb: driver enhancement concerning GEM support, ring logic and cleanup   David Miller
• [PATCH] at91ether: return PTR_ERR if call to clk_get fails   David Miller
• [PATCH 2/3 V4] phy/micrel: Rename KS80xx to KSZ80xx   David Miller
• [PATCH] ARM: Fix build warning in do_alignment.   Chanho Min
• [PATCH] ARM: Fix build warning in do_alignment.   Chanho Min
• [PATCH] ARM: Fix build warning in do_alignment.   Chanho Min
• [PATCH] ARM: gic: fix irq affinity mismatch.   Chanho Min
• Without MACH_ option Early printk (DEBUG_LL)   Mohammed, Afzal
• [PATCH v6 10/10] ARM: OMAP2+: tusb6010: generic timing calculation   Mohammed, Afzal
• [PATCH 4/9] ARM: OMAP2+: Remove unused nand_irq for GPMC   Mohammed, Afzal
• [PATCH 6/9] ARM: OMAP: Move gpio.h to include/linux/platform_data   Mohammed, Afzal
• [PATCH 7/9] ARM: OMAP2+: Prepare for irqs.h removal   Mohammed, Afzal
• [PATCH v7 0/3] GPMC driver conversion   Afzal Mohammed
• [PATCH v7 1/3] ARM: OMAP2/3: hwmod data: add gpmc   Afzal Mohammed
• [PATCH v7 2/3] ARM: OMAP2+: gpmc: Adapt to HWMOD   Afzal Mohammed
• [PATCH v7 3/3] ARM: OMAP2+: gpmc: minimal driver support   Afzal Mohammed
• [PATCH 7/9] ARM: OMAP2+: Prepare for irqs.h removal   Mohammed, Afzal
• [PATCH v8 0/3] GPMC driver conversion   Afzal Mohammed
• [PATCH v8 1/3] ARM: OMAP2/3: hwmod data: add gpmc   Afzal Mohammed
• [PATCH v8 2/3] ARM: OMAP2+: gpmc: Adapt to HWMOD   Afzal Mohammed
• [PATCH v8 3/3] ARM: OMAP2+: gpmc: minimal driver support   Afzal Mohammed
• [PATCH v7 3/3] ARM: OMAP2+: gpmc: minimal driver support   Mohammed, Afzal
• [PATCH 7/9] ARM: OMAP2+: Prepare for irqs.h removal   Mohammed, Afzal
• [PATCH v6 10/10] ARM: OMAP2+: tusb6010: generic timing calculation   Mohammed, Afzal
• [PATCH v9 0/3] GPMC driver conversion   Afzal Mohammed
• [PATCH v9 1/3] ARM: OMAP2/3: hwmod data: add gpmc   Afzal Mohammed
• [PATCH v9 2/3] ARM: OMAP2+: gpmc: Adapt to HWMOD   Afzal Mohammed
• [PATCH v9 3/3] ARM: OMAP2+: gpmc: minimal driver support   Afzal Mohammed
• [PATCH v8 2/3] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [PATCH v8 0/3] GPMC driver conversion   Mohammed, Afzal
• [PATCH v6 10/10] ARM: OMAP2+: tusb6010: generic timing calculation   Mohammed, Afzal
• [PATCH v6 10/10] ARM: OMAP2+: tusb6010: generic timing calculation   Mohammed, Afzal
• [PATCH v9 3/3] ARM: OMAP2+: gpmc: minimal driver support   Mohammed, Afzal
• [PATCH v9 1/3] ARM: OMAP2/3: hwmod data: add gpmc   Mohammed, Afzal
• [PATCH v6 10/10] ARM: OMAP2+: tusb6010: generic timing calculation   Mohammed, Afzal
• [PATCH v7 00/11] OMAP-GPMC: generic time calc, prepare for driver   Afzal Mohammed
• [PATCH v7 01/11] ARM: OMAP2+: nand: unify init functions   Afzal Mohammed
• [PATCH v7 02/11] ARM: OMAP2+: nand: remove redundant rounding   Afzal Mohammed
• [PATCH v7 03/11] ARM: OMAP2+: gpmc: handle additional timings   Afzal Mohammed
• [PATCH v7 04/11] ARM: OMAP2+: onenand: refactor for clarity   Afzal Mohammed
• [PATCH v7 05/11] ARM: OMAP2+: GPMC: Remove unused OneNAND get_freq() platform function   Afzal Mohammed
• [PATCH v7 06/11] ARM: OMAP2+: gpmc: find features by ip rev check   Afzal Mohammed
• [PATCH v7 07/11] ARM: OMAP2+: gpmc: remove cs# in sync clk div calc   Afzal Mohammed
• [PATCH v7 08/11] ARM: OMAP2+: gpmc: generic timing calculation   Afzal Mohammed
• [PATCH v7 09/11] ARM: OMAP2+: onenand: generic timing calculation   Afzal Mohammed
• [PATCH v7 10/11] ARM: OMAP2+: smc91x: generic timing calculation   Afzal Mohammed
• [PATCH v7 11/11] ARM: OMAP2+: tusb6010: generic timing calculation   Afzal Mohammed
• [PATCH v6 10/10] ARM: OMAP2+: tusb6010: generic timing calculation   Mohammed, Afzal
• [PATCH v7 00/11] OMAP-GPMC: generic time calc, prepare for driver   Mohammed, Afzal
• [PATCH v7 08/11] ARM: OMAP2+: gpmc: generic timing calculation   Mohammed, Afzal
• [PATCH v7 08/11] ARM: OMAP2+: gpmc: generic timing calculation   Mohammed, Afzal
• [PATCH 00/11] Versatile Express infrastructure   Pawel Moll
• [PATCH 01/11] input: ambakmi: Add missing clk_[un]prepare() calls   Pawel Moll
• [PATCH 02/11] misc: Versatile Express config bus infrastructure   Pawel Moll
• [PATCH 03/11] misc: Versatile Express reset driver   Pawel Moll
• [PATCH 04/11] misc: Versatile Express display muxer driver   Pawel Moll
• [PATCH 05/11] clk: Versatile Express clock generators ("osc") driver   Pawel Moll
• [PATCH 06/11] clk: Common clocks implementation for Versatile Express   Pawel Moll
• [PATCH 07/11] regulators: Versatile Express regulator driver   Pawel Moll
• [PATCH 08/11] hwmon: Versatile Express hwmon driver   Pawel Moll
• [PATCH 09/11] misc: Versatile Express system registers driver   Pawel Moll
• [PATCH 10/11] ARM: vexpress: Add config bus components and clocks to DTs   Pawel Moll
• [PATCH 11/11] ARM: vexpress: Start using new Versatile Express infrastructure   Pawel Moll
• [PATCH 02/11] misc: Versatile Express config bus infrastructure   Pawel Moll
• [PATCH 06/11] clk: Common clocks implementation for Versatile Express   Pawel Moll
• [PATCH 04/11] misc: Versatile Express display muxer driver   Pawel Moll
• [PATCH 10/11] ARM: vexpress: Add config bus components and clocks to DTs   Pawel Moll
• [PATCH 01/11] input: ambakmi: Add missing clk_[un]prepare() calls   Pawel Moll
• [PATCH 10/11] ARM: vexpress: Add config bus components and clocks to DTs   Pawel Moll
• [PATCH 02/11] misc: Versatile Express config bus infrastructure   Pawel Moll
• [PATCH 05/11] clk: Versatile Express clock generators ("osc") driver   Pawel Moll
• [PATCH 05/11] clk: Versatile Express clock generators ("osc") driver   Pawel Moll
• [PATCH v4 21/24] arm/v2m: initialize arch_timers even if v2m_timer is not present   Pawel Moll
• [PATCH v4 21/24] arm/v2m: initialize arch_timers even if v2m_timer is not present   Pawel Moll
• [PATCH v2 00/13] Versatile Express infrastructure   Pawel Moll
• [PATCH v2 01/13] input: ambakmi: (Un)prepare clocks when (dis)enabling   Pawel Moll
• [PATCH v2 02/13] video: Versatile Express display output driver   Pawel Moll
• [PATCH v2 03/13] hwmon: Versatile Express hwmon driver   Pawel Moll
• [PATCH v2 04/13] regulators: Versatile Express regulator driver   Pawel Moll
• [PATCH v2 05/13] clk: Versatile Express clock generators ("osc") driver   Pawel Moll
• [PATCH v2 06/13] clk: Common clocks implementation for Versatile Express   Pawel Moll
• [PATCH v2 07/13] misc: Versatile Express config infrastructure   Pawel Moll
• [PATCH v2 08/13] mfd: Versatile Express system registers driver   Pawel Moll
• [PATCH v2 09/13] ARM: vexpress: Reset driver   Pawel Moll
• [PATCH v2 10/13] ARM: vexpress: Add config bus components and clocks to DTs   Pawel Moll
• [PATCH v2 11/13] ARM: vexpress: Start using new Versatile Express infrastructure   Pawel Moll
• [PATCH v2 12/13] ARM: vexpress: Remove motherboard dependencies in the DTS files   Pawel Moll
• [PATCH v2 13/13] ARM: vexpress: Make the DEBUG_LL UART detection more specific   Pawel Moll
• [PATCH v2 04/13] regulators: Versatile Express regulator driver   Pawel Moll
• [PATCH v2 04/13] regulators: Versatile Express regulator driver   Pawel Moll
• [PATCH 10/11] ARM: vexpress: Add config bus components and clocks to DTs   Pawel Moll
• [PATCH v2 08/13] mfd: Versatile Express system registers driver   Pawel Moll
• [PATCH v2 08/13] mfd: Versatile Express system registers driver   Pawel Moll
• [RFC PATCH 2/3] ARM: vexpress: Add device tree support for CLCD driver   Pawel Moll
• [PATCH v2 04/13] regulators: Versatile Express regulator driver   Pawel Moll
• [PATCH v2 03/13] hwmon: Versatile Express hwmon driver   Pawel Moll
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Pawel Moll
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Pawel Moll
• [PATCH v2 07/13] misc: Versatile Express config infrastructure   Pawel Moll
• [PATCH v2 07/13] misc: Versatile Express config infrastructure   Pawel Moll
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Pawel Moll
• [PATCH v3] hwmon: Versatile Express hwmon driver   Pawel Moll
• [PATCH v2 04/13] regulators: Versatile Express regulator driver   Pawel Moll
• [RFC PATCH 1/3] amba-clcd: Add Device Tree support to amba-clcd driver   Pawel Moll
• [PATCH v3] hwmon: Versatile Express hwmon driver   Pawel Moll
• [PATCH v4] hwmon: Versatile Express hwmon driver   Pawel Moll
• [PATCH v2] arm: introduce a DTS for Xen unprivileged virtual machines   Pawel Moll
• [PATCH v4] hwmon: Versatile Express hwmon driver   Pawel Moll
• [GIT PULL] Versatile Express clk   Pawel Moll
• [GIT PULL] Veratile Express updates for v3.7   Pawel Moll
• [PATCH v4] hwmon: Versatile Express hwmon driver   Pawel Moll
• [GIT PULL] Veratile Express updates for v3.7   Pawel Moll
• [PATCH v4] hwmon: Versatile Express hwmon driver   Pawel Moll
• [RFC] regulator: core: Support for continuous voltage range   Pawel Moll
• [PATCH v3] regulator: Versatile Express regulator driver   Pawel Moll
• [PATCH 05/11] ARM: shmobile: r8a7779: add USB common phy initializer   Kuninori Morimoto
• [PATCH] ARM: shmobile: r8a7779: remove USB phy initializer   Kuninori Morimoto
• [PATCH] ARM: shmobile: r8a7779: remove USB phy initializer   Kuninori Morimoto
• [PATCH] ARM: shmobile: r8a7740: add USB24 clock explain and sample code   Kuninori Morimoto
• [PATCH] ARM: shmobile: r8a7779: remove USB phy initializer   Kuninori Morimoto
• [PATCH] ARM: shmobile: r8a7779: remove USB phy initializer   Kuninori Morimoto
• [PATCH] kernel/sys.c: call disable_nonboot_cpus in kernel_restart   Andrew Morton
• [PATCH] RTC: TWL: ensure all interrupts are disabled during probe   Andrew Morton
• [PATCH v2 0/4] lis3: lis3lv02d_i2c: Add device tree support   Andrew Morton
• [PATCH v3 4/4] ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evm   Andrew Morton
• [PATCH] rtc: snvs: improve timeout handling in snvs_rtc_enable()   Andrew Morton
• [PATCH v3 0/4] lis3: lis3lv02d_i2c: Add device tree support   Andrew Morton
• [PATCH v3 0/4] lis3: lis3lv02d_i2c: Add device tree support   Andrew Morton
• [PATCH] ARM: shmobile: kzm9g: use gpio-keys instead of gpio-keys-polled   Paul Mundt
• [PATCH 19/24] sh: use __iomem pointers for MMIO   Paul Mundt
• [PATCH 01/24] ARM: shmobile: use __iomem pointers for MMIO   Paul Mundt
• [PATCH 2/4] irqdomain: augment add_simple() to allocate descs   Paul Mundt
• [PATCH] ARM: OMAP2+: mux: add support for PAD wakeup event handler   Munegowda, Keshava
• [PATCH] ARM: OMAP2+: mux: add support for PAD wakeup event handler   Munegowda, Keshava
• [PATCH] arm: add SDIV/UDIV emulation for ARMv7 processors   Vladimir Murzin
• [PATCH 3/9] mtd: gpmi: add a new field for HW_GPMI_TIMING1   Vikram Narayanan
• [PATCH 5/9] mtd: gpmi: add a new field for HW_GPMI_CTRL1   Vikram Narayanan
• [PATCH 6/9] mtd: gpmi: simplify the setting DLL code   Vikram Narayanan
• [PATCH] arm/omap: Replace board_ref_clock with enum values   Vikram Narayanan
• [PATCH] gpio: samsung: Update documentation   Sylwester Nawrocki
• [PATCH] ARM: Samsung: Remove unused code for the clocks debug-fs interface   Sylwester Nawrocki
• [PATCH 3/8] i2c: at91: use an id table for SoC dependent parameters   Sylwester Nawrocki
• [PATCH] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support   Sylwester Nawrocki
• [PATCH v2] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support   Sylwester Nawrocki
• [PATCH] gpio: samsung: Update documentation   Sylwester Nawrocki
• [PATCH] ARM: Samsung: Remove unused code for the clocks debug-fs interface   Sylwester Nawrocki
• [PATCH V4 2/2] video: drm: exynos: Add device tree support   Sylwester Nawrocki
• [PATCH] ARM: EXYNOS5: Add bus clock and set parent clock for FIMD   Sylwester Nawrocki
• [PATCH] media: add V4L2 DT binding documentation   Sylwester Nawrocki
• [PATCH 0/7] s5p-fimc/mipi-csis drivers cleanup   Sylwester Nawrocki
• [PATCH 1/7] ARM: samsung: Remove unused fields from FIMC and CSIS platform data   Sylwester Nawrocki
• [PATCH 2/7] ARM: samsung: Change __s5p_mipi_phy_control() function signature   Sylwester Nawrocki
• [PATCH 3/7] ARM: EXYNOS: Change MIPI-CSIS device regulator supply names   Sylwester Nawrocki
• [PATCH 1/7] ARM: samsung: Remove unused fields from FIMC and CSIS platform data   Sylwester Nawrocki
• [PATCH] samsung: clock: Modify for the case with the only parent   Sylwester Nawrocki
• [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Rajendra Nayak
• [PATCHv5 00/10] ARM: OMAP: PM usecounting changes   Rajendra Nayak
• [PATCHv5 00/10] ARM: OMAP: PM usecounting changes   Rajendra Nayak
• [PATCHv5 00/10] ARM: OMAP: PM usecounting changes   Rajendra Nayak
• [PATCH 5/6] staging: drm/imx: Add devicetree binding documentation   Eric Nelson
• [PATCH 5/6] staging: drm/imx: Add devicetree binding documentation   Eric Nelson
• [PATCH 4/6] staging: drm/imx: Add i.MX IPUv3 crtc support   Eric Nelson
• [PATCH 4/6] staging: drm/imx: Add i.MX IPUv3 crtc support   Eric Nelson
• [alsa-devel] [PATCH v3 00/15] ASoC: OMAP: Convert to use dmaengine   Ricardo Neri
• [PATCH 05/12] ARM: socfpga: move debug macros to include/debug   Dinh Nguyen
• [PATCH 05/12] ARM: socfpga: move debug macros to include/debug   Dinh Nguyen
• [PATCH v2 0/5] ARM: tegra: enable wlan for t20 and t30   Wei Ni
• [PATCH v2 1/5] ARM: tegra: set up wlan clocks for tegra dt   Wei Ni
• [PATCH v2 2/5] ARM: dt: t20 seaboard: turn on the power for wlan   Wei Ni
• [PATCH v2 3/5] ARM: dt: t20 ventana: set pinmux and power for wlan   Wei Ni
• [PATCH v2 4/5] ARM: dt: t30 cardhu: set pinmux and power for wlan   Wei Ni
• [PATCH v2 5/5] ARM: tegra: enable brcmfmac in defconfig   Wei Ni
• [PATCH 1/1] ARM: mmp: enable pxa910 gpio wake up setting   Jun Nie
• [PATCH v2 1/1] ARM: mmp: enable pxa910 gpio wake up   Jun Nie
• [PATCH v2] ARM: Build dtb files in all target   Jonathan Nieder
• [PATCH v2] ARM: Build dtb files in all target   Jonathan Nieder
• When to cc stable at vger.kernel.org (Re: [PATCH v2] ARM: Build dtb files in all target)   Jonathan Nieder
• Dockstar fails to boot since v3.0-rc6-6-g3835d69   Jonathan Nieder
• RCU warning during UBI file system mount   Subodh Nijsure
• [PATCH v2 1/2] ARM: da850/omap-l138: Add SoC related definitions for VPIF   Sekhar Nori
• [PATCH v2 2/2] ARM: da850/omap-l138: Add EVM specific code for VPIF to work   Sekhar Nori
• [PATCH v2 2/2] ARM: da850/omap-l138: Add EVM specific code for VPIF to work   Sekhar Nori
• [PATCH 13/16] ARM: omap: move platform_data definitions   Sekhar Nori
• GCC 4.6.x miscompiling arm-linux?   Michael Olbrich
• GCC 4.6.x miscompiling arm-linux?   Michael Olbrich
• [PATCH] mfd: ab8500: Make ab8500_irq_get_virq() static   Samuel Ortiz
• [PATCH 16/19] mfd: Provide the tc3589x with its own IRQ domain   Samuel Ortiz
• [PATCH 17/19] mfd: Enable the tc3589x for Device Tree   Samuel Ortiz
• [PATCH v6 0/4] add syscon driver based on regmap for general registers access   Samuel Ortiz
• [PATCH 15/19] mfd: Don't convert just one IRQ using irqdomain if a range is provided   Samuel Ortiz
• [PATCH] mfd: Fix compile for twl-core.c by removing cpu_is_omap usage   Samuel Ortiz
• [PATCH 7/8] mfd: Use the AB8500's IRQ domain to convert hwirq to virq   Samuel Ortiz
• [PATCH v4 00/14] MFD/ASoC/Input: twl4030-audio submodule DT support   Samuel Ortiz
• [PATCH v2 0/3] MFD/GPIO: Add twl6040 GPO driver   Samuel Ortiz
• [PATCH v2 0/3] MFD/GPIO: Add twl6040 GPO driver   Samuel Ortiz
• [PATCH 4/7] mfd: ab8500-core: Apply the AB8500 CODEC's compatible string to its MFD cell   Samuel Ortiz
• [PATCH 3/4] mfd: dbx500: Provide a more accurate smp_twd clock   Samuel Ortiz
• [rtc-linux] [PATCH 1/1] drivers/rtc/rtc-ab8500.c: Revoke Device Tree enablement   Samuel Ortiz
• [PATCH 3/4] mfd: dbx500: Provide a more accurate smp_twd clock   Samuel Ortiz
• [V4 3/4] power_supply: Enable battery-charger for 88pm860x   Samuel Ortiz
• [PATCH 15/19] mfd: Don't convert just one IRQ using irqdomain if a range is provided   Samuel Ortiz
• [PATCH 1/1] mfd: Provide the PRCMU with its own IRQ domain   Samuel Ortiz
• [PATCH 02/17] arm: ux500: add ccu9540 board support   Loic PALLARDY
• [PATCH 3/8] i2c: at91: use an id table for SoC dependent parameters   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/8] ARM: dts: add twi nodes for atmel boards   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 31/31] arm64: MAINTAINERS update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/16] ARM: at91: move platform_data definitions   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] ARM: at91: fix missing #interrupt-cells on gpio-controller   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/16 v2] ARM: at91: add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/16] ARM: at91: fix missing #interrupt-cells on gpio-controller   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/16] arm: at91: use macro to declare soc boot data   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/16] ARM: at91: gpio: implement request   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/16] at91: regroup gpio and pinctrl under the same ranges   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/16] arm: at91: at91sam9x5: fix gpio number per bank   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/16] ARM: at91: add dummies pinctrl for non dt platform   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/16] ARM: at91: add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/16] arm: at91: dt: at91sam9 add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/16] arm: at91: dt: at91sam9 add serial pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/16] tty: atmel_serial: add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/16] arm: at91: dt: sam9m10g45ek: use rts/cts pinctrl group for uart1   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/16] arm: at91: dt: sam9263ek: use rts/cts pinctrl group for uart0   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/16] arm: at91: dt: sam9g20ek: use rts/cts/dtr/dsr/dcd/ri pinctrl group for uart0   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 14/16] MTD: atmel nand: fix gpio missing request   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 15/16] arm: at91: dt: at91sam9 add nand pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 16/16] MTD: atmel_nand: add pinctrl consumer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arch/arm/mach-at91/gpio.c: Remove unecessary semicolon   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] mtd: atmel_nand: fix the compile error which miss label "err_ecc_ioremap".   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 1/2] watchdog: at91sam9_wdt: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 2/2] ARM: at91: add at91sam9_wdt driver to at91sam9260   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 2/2] ARM: at91: add at91sam9_wdt driver to at91sam9260   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 1/2] watchdog: at91sam9_wdt: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 1/2] watchdog: at91sam9_wdt: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6] atmel SoC SPI controller with DT   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 0/3] ARM: uncompress.h multi-platform enablement   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 0/3] ARM: use C pre-processor with dtc   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 1/3] kbuild: introduce cmd_dtc_cpp   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 2/3] ARM: use cmd_dtc_cpp for compilation of *.dts-cpp to *.dtb   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 2/2] ARM: at91: add at91sam9_wdt driver to at91sam926x, at91sam9g45   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 1/2] watchdog: at91sam9_wdt: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] spi: atmel: add dmaengine and dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 1/2] watchdog: at91sam9_wdt: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 0/3] ARM: use C pre-processor with dtc   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 1/3] kbuild: introduce cmd_dtc_cpp   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: bcm2835: implement machine restart hook   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/12] mtd: atmel nand: build regression   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/17] Add ST-Ericsson U9540 support   Loic Pallardy
• [PATCH 01/17] arm: ux500: add u9540 pin configuration   Loic Pallardy
• [PATCH 02/17] arm: ux500: add ccu9540 board support   Loic Pallardy
• [PATCH 03/17] arm: ux500: Create board-specific IRQ init callback   Loic Pallardy
• [PATCH 04/17] mfd: dbx500-prcmu: Introduce TCDM mapping struct   Loic Pallardy
• [PATCH 05/17] mfd: dbx500-prcmu: Handle TCDM mapping   Loic Pallardy
• [PATCH 06/17] arm: ux500: Add u9540 PRCMU TCDM configuration   Loic Pallardy
• [PATCH 07/17] mfd: prcmu: configurable tcdm base address   Loic Pallardy
• [PATCH 08/17] arm: ux500: update DB internal irq nb   Loic Pallardy
• [PATCH 09/17] mfd: prcmu: add db9540 support   Loic Pallardy
• [PATCH 10/17] mfd: prcmu: dbx500-prmcu creation   Loic Pallardy
• [PATCH 11/17] mfd: pcrmu: create common header file for legacy mailbox   Loic Pallardy
• [PATCH 12/17] mfd: prcmu: make fw_project_name generic   Loic Pallardy
• [PATCH 13/17] mfd: prcmu: make legacy mailbox services configurable   Loic Pallardy
• [PATCH 14/17] mfd: db8500-prcmu: use db8500 legacy services   Loic Pallardy
• [PATCH 15/17] mfd: dbx540-prcmu creation   Loic Pallardy
• [PATCH 16/17] arm: ux500: add dbx540 prcmu platform data   Loic Pallardy
• [PATCH 17/17] mfd: db8500-prcmu: activate dbx540-prcmu driver   Loic Pallardy
• [PATCH v5 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH v5 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v5 2/5] usb: s3c-hsotg: Adding phy driver support   Praveen Paneri
• [PATCH v5 3/5] ARM: S3C64XX: Removing old phy setup code   Praveen Paneri
• [PATCH v5 4/5] ARM: S3C64XX: Enabling samsung-usbphy driver   Praveen Paneri
• [PATCH v5 5/5] ARM: Exynos4210: Enabling samsung-usbphy driver   Praveen Paneri
• [PATCH v5 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v5 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v6 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v6 2/5] usb: s3c-hsotg: Adding phy driver support   Praveen Paneri
• [PATCH v6 3/5] ARM: S3C64XX: Removing old phy setup code   Praveen Paneri
• [PATCH v6 4/5] ARM: S3C64XX: Enabling samsung-usbphy driver   Praveen Paneri
• [PATCH v6 5/5] ARM: Exynos4210: Enabling samsung-usbphy driver   Praveen Paneri
• [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH V4 2/2] video: drm: exynos: Add device tree support   Kyungmin Park
• [PATCH 15/16] ARM: samsung: move platform_data definitions   Kyungmin Park
• [PATCH v9 05/13] ARM: SoC: convert Exynos4 to SoC descriptor   Kyungmin Park
• [PATCH 0/5] ARM: EXYNOS: Add secure firmware support   Kyungmin Park
• Mismatched aliases with DMA mappings?   Kyungmin Park
• [PATCH 4/5] ARM: EXYNOS: Add support for Exynos secure firmware   Kyungmin Park
• [PATCH 2/5] ARM: Add interface for registering and calling firmware-specific operations   Kyungmin Park
• [PATCH 4/5] ARM: EXYNOS: Add support for Exynos secure firmware   Kyungmin Park
• [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Kyungmin Park
• [RFC PATCH 0/6] pinctrl: samsung: Convert the driver to use per-bank GPIO and interrupt specifiers   Kyungmin Park
• [PATCH] ASoC: SAMSUNG: Add SND_SOC_DAIFMT_CONT option for snd_soc_set_fmt()   Sangsu Park
• [PATCH] ASoC: SAMSUNG: Add SND_SOC_DAIFMT_CONT option for snd_soc_set_fmt()   Sangsu Park
• [PATCH v2] ASoC: Samsung: Update Kconfig for Exynos5250 and Exynos4412   Sangsu Park
• [PATCH] ARM: EXYNOS: Remove wrong I2S0 clock from peril clock   Sangsu Park
• [PATCH 07/16] ARM: pxa: move platform_data definitions   Paul Parsons
• [PATCH] ARM: pxa2xx: Remove EXPERIMENTAL dependency from spi-pxa2xx driver   Paul Parsons
• [PATCH v2] ARM: pxa2xx: Remove EXPERIMENTAL dependency from spi-pxa2xx driver   Paul Parsons
• PXA PWM possible regression after 3.5: backlight remains off after resume   Paul Parsons
• PXA PWM possible regression after 3.5: backlight remains off after resume   Paul Parsons
• PXA PWM possible regression after 3.5: backlight remains off after resume   Paul Parsons
• [PATCH] ARM: pxa: hx4700: Fix backlight PWM device number   Paul Parsons
• [PATCH] ARM: pxa: hx4700: Fix backlight PWM device number   Paul Parsons
• [PATCH] ARM: pxa: hx4700: Fix backlight PWM device number   Paul Parsons
• [PATCH v2] ARM: pxa: hx4700: Fix backlight PWM device number   Paul Parsons
• [PATCH] pinctrl: use kasprintf() in pinmux_request_gpio()   Joe Perches
• [PATCH] arm: mm: fix DMA pool affiliation check   Thomas Petazzoni
• net: Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   Thomas Petazzoni
• [PATCH 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH 2/4] net: mvneta: update MAINTAINERS file for the mvneta maintainers   Thomas Petazzoni
• [PATCH 3/4] arm: mvebu: add Ethernet controllers using mvneta driver for Armada 370/XP   Thomas Petazzoni
• [PATCH 4/4] arm: mvebu: enable Ethernet controllers on Armada 370/XP eval boards   Thomas Petazzoni
• [PATCH 01/11] input: ambakmi: Add missing clk_[un]prepare() calls   Thomas Petazzoni
• [PATCH 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH 6/8] gpio: 74x164: Add support for daisy-chaining   Thomas Petazzoni
• [PATCH 3/8] gpio: 74x164: Remove platform data and use dynamic gpio number assignment   Thomas Petazzoni
• [PATCH 1/8] gpio: 74x164: Use module_spi_driver boiler plate function   Thomas Petazzoni
• [PATCH 2/8] gpio: 74x164: Use devm_kzalloc   Thomas Petazzoni
• [PATCH 3/8] gpio: 74x164: Remove platform data and use dynamic gpio number assignment   Thomas Petazzoni
• [PATCH 4/8] gpio: 74x164: Add device tree support   Thomas Petazzoni
• [PATCH 5/8] gpio: 74x164: Add output pin support   Thomas Petazzoni
• [PATCH 5/8] gpio: 74x164: Add output pin support   Thomas Petazzoni
• [PATCH 5/8] gpio: 74x164: Add output pin support   Thomas Petazzoni
• [PATCH 5/8] gpio: 74x164: Add output pin support   Thomas Petazzoni
• [PATCH v4] Add basic address decoding support for Marvell 370/XP   Thomas Petazzoni
• [PATCH v4 01/17] arm: mach-dove: use plus instead of or for address definitions   Thomas Petazzoni
• [PATCH v4 02/17] arm: mach-kirkwood: use plus instead of or for address definitions   Thomas Petazzoni
• [PATCH v4 03/17] arm: mach-mv78xx0: use plus instead of or for address definitions   Thomas Petazzoni
• [PATCH v4 04/17] arm: mach-orion5x: use plus instead of or for address definitions   Thomas Petazzoni
• [PATCH v4 05/17] arm: mach-dove: use IOMEM() for base address definitions   Thomas Petazzoni
• [PATCH v4 06/17] arm: mach-kirkwood: use IOMEM() for base address definitions   Thomas Petazzoni
• [PATCH v4 07/17] arm: mach-mv78xx0: use IOMEM() for base address definitions   Thomas Petazzoni
• [PATCH v4 08/17] arm: mach-orion5x: use IOMEM() for base address definitions   Thomas Petazzoni
• [PATCH v4 09/17] arm: mach-mvebu: use IOMEM() for base address definitions   Thomas Petazzoni
• [PATCH v4 10/17] arm: plat-orion: use void __iomem pointers for UART registration functions   Thomas Petazzoni
• [PATCH v4 11/17] arm: plat-orion: use void __iomem pointers for MPP functions   Thomas Petazzoni
• [PATCH v4 12/17] arm: plat-orion: use void __iomem pointers for time functions   Thomas Petazzoni
• [PATCH v4 13/17] arm: plat-orion: use void __iomem pointers for addr-map functions   Thomas Petazzoni
• [PATCH v4 14/17] arm: plat-orion: introduce PLAT_ORION_LEGACY hidden config option   Thomas Petazzoni
• [PATCH v4 15/17] arm: plat-orion: make bridge_virt_base non-const to support DT use case   Thomas Petazzoni
• [PATCH v4 16/17] arm: mvebu: add basic address decoding support to Armada 370/XP   Thomas Petazzoni
• [PATCH v4 17/17] arm: mvebu: add address decoding controller to the DT   Thomas Petazzoni
• [PATCH 1/5] arm: plat-orion: use 'void __iomem *' in addr-map code   Thomas Petazzoni
• [PATCH 14/16] ARM: orion: move platform_data definitions   Thomas Petazzoni
• [PATCH v4] Add basic address decoding support for Marvell 370/XP   Thomas Petazzoni
• pinctrl: mvebu: minor fixes   Thomas Petazzoni
• [PATCH 1/2] pinctrl: mvebu: mark internal functions as static   Thomas Petazzoni
• [PATCH 2/2] pinctrl: mvebu: remove dead code   Thomas Petazzoni
• [PATCH v3 1/9] pinctrl: mvebu: pinctrl driver core   Thomas Petazzoni
• pinctrl: mvebu: minor fixes   Thomas Petazzoni
• arm: mvebu: improve Kconfig options handling for pinctrl   Thomas Petazzoni
• [PATCH 1/2] arm: mvebu: split Kconfig options for Armada 370 and XP   Thomas Petazzoni
• [PATCH 2/2] arm: mvebu: select the pinctrl drivers for Armada 370 and Armada XP platforms   Thomas Petazzoni
• [PATCH v4] Add basic address decoding support for Marvell 370/XP   Thomas Petazzoni
• [PATCH v3 1/9] pinctrl: mvebu: pinctrl driver core   Thomas Petazzoni
• [PATCH v3 6/9] ARM: mvebu: add pinctrl device in DT for Armada 370/XP SoCs   Thomas Petazzoni
• arm: mvebu: improve Kconfig options handling for pinctrl   Thomas Petazzoni
• [PATCH 2/2] arm: mvebu: select the pinctrl drivers for Armada 370 and Armada XP platforms   Thomas Petazzoni
• [PATCH v3 1/9] pinctrl: mvebu: pinctrl driver core   Thomas Petazzoni
• [PATCH v4 00/10] pinctrl: mvebu: pinctrl driver   Thomas Petazzoni
• [PATCH v4] gpio: mvebu: new gpio driver for mvebu platforms   Thomas Petazzoni
• [PATCH v3 1/5] gpio: introduce gpio-mvebu driver for Marvell SoCs   Thomas Petazzoni
• [PATCH v3 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Thomas Petazzoni
• [PATCH v3 3/5] arm: mvebu: use GPIO support now that a driver is available   Thomas Petazzoni
• [PATCH v3 4/5] arm: mvebu: add DT information for GPIO banks on Armada 370 and XP   Thomas Petazzoni
• [PATCH v3 5/5] arm: mvebu: add gpio support in defconfig   Thomas Petazzoni
• [PATCH] pinctrl: use kasprintf() in pinmux_request_gpio()   Thomas Petazzoni
• [PATCH v3 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Thomas Petazzoni
• [PATCH v3 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Thomas Petazzoni
• [PATCH v4] gpio: mvebu: new gpio driver for mvebu platforms   Thomas Petazzoni
• [PATCH v4 1/5] gpio: introduce gpio-mvebu driver for Marvell SoCs   Thomas Petazzoni
• [PATCH v4 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Thomas Petazzoni
• [PATCH v4 3/5] arm: mvebu: use GPIO support now that a driver is available   Thomas Petazzoni
• [PATCH v4 4/5] arm: mvebu: add DT information for GPIO banks on Armada 370 and XP   Thomas Petazzoni
• [PATCH v4 5/5] arm: mvebu: add gpio support in defconfig   Thomas Petazzoni
• [PATCH v4] Add basic address decoding support for Marvell 370/XP   Thomas Petazzoni
• [PATCH 00/11] pinctrl: mvebu: pinctrl driver   Thomas Petazzoni
• [PATCH 00/11] pinctrl: mvebu: pinctrl driver   Thomas Petazzoni
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Thomas Petazzoni
• [PATCH v4 1/5] gpio: introduce gpio-mvebu driver for Marvell SoCs   Thomas Petazzoni
• [PATCH v4] Add basic address decoding support for Marvell 370/XP   Thomas Petazzoni
• [GIT PULL V3 1/5] ARM: Kirkwood: address decoding change for v3.7   Thomas Petazzoni
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Thomas Petazzoni
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Thomas Petazzoni
• [PATCH] ARM: mvebu: fix build breaks from multi-platform conversion   Thomas Petazzoni
• [PATCH] ARM: bcm2835: implement machine restart hook   Thomas Petazzoni
• [PATCH v2 06/11] USB: mxs-phy: add basic otg support   Chen Peter-B29397
• [PATCH] USB: chipidea: use OTGSC_BSV to detect vbus valid   Chen Peter-B29397
• [PATCH v3] USB: mxs-phy: add basic otg support   Chen Peter-B29397
• [PATCH v3] USB: mxs-phy: add basic otg support   Chen Peter-B29397
• [PATCH 0/4] Add PHY nofity for some i.mx SoCs   Chen Peter-B29397
• GCC 4.6.x miscompiling arm-linux?   Mikael Pettersson
• GCC 4.6.x miscompiling arm-linux?   Mikael Pettersson
• GCC 4.6.x miscompiling arm-linux?   Mikael Pettersson
• GCC 4.6.x miscompiling arm-linux?   Mikael Pettersson
• GCC 4.6.x miscompiling arm-linux?   Mikael Pettersson
• [PATCH RESEND] arm/dts: AM33XX: Add SPI device tree data   Philip, Avinash
• [PATCH RESEND] arm/dts: AM33XX: Add SPI device tree data   Philip, Avinash
• [PATCH v2] arm/dts: AM33XX: Add SPI device tree data   Philip, Avinash
• [PATCH v2] arm/dts: AM33XX: Add SPI device tree data   Philip, Avinash
• [PATCH 0/2] ARM: dts: AM33XX: Add ECAP and EHRPWM device tree data   Philip, Avinash
• [PATCH 1/2] ARM: dts: AM33XX: Add ECAP & EHRPWM device tree nodes   Philip, Avinash
• [PATCH 2/2] ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm   Philip, Avinash
• [PATCH] ARM: suspend: use flush range instead of flush all   Lorenzo Pieralisi
• [RFC PATCH 0/6] ARM: augment cache flushing API   Lorenzo Pieralisi
• [RFC PATCH 1/6] ARM: mm: define LoUIS API for cache maintenance ops   Lorenzo Pieralisi
• [RFC PATCH 2/6] ARM: mm: add v7 cache LoUIS API implementation   Lorenzo Pieralisi
• [RFC PATCH 3/6] ARM: mm: add v7 dcache level API   Lorenzo Pieralisi
• [RFC PATCH 4/6] ARM: kernel: update cpu_suspend code to use cache LoUIS operations   Lorenzo Pieralisi
• [RFC PATCH 5/6] ARM: kernel: update __cpu_disable to use cache LoUIS maintenance API   Lorenzo Pieralisi
• [RFC PATCH 6/6] ARM: mm: update __v7_setup() to the new LoUIS cache maintenance API   Lorenzo Pieralisi
• [RFC PATCH 1/6] ARM: mm: define LoUIS API for cache maintenance ops   Lorenzo Pieralisi
• [RFC PATCH 4/6] ARM: kernel: update cpu_suspend code to use cache LoUIS operations   Lorenzo Pieralisi
• [RFC PATCH 4/6] ARM: kernel: update cpu_suspend code to use cache LoUIS operations   Lorenzo Pieralisi
• [RFC PATCH v2 0/5] ARM: augment cache flushing API   Lorenzo Pieralisi
• [RFC PATCH v2 1/5] ARM: mm: implement LoUIS API for cache maintenance ops   Lorenzo Pieralisi
• [RFC PATCH v2 2/5] ARM: mm: rename jump labels in v7_flush_dcache_all function   Lorenzo Pieralisi
• [RFC PATCH v2 3/5] ARM: kernel: update cpu_suspend code to use cache LoUIS operations   Lorenzo Pieralisi
• [RFC PATCH v2 4/5] ARM: kernel: update __cpu_disable to use cache LoUIS maintenance API   Lorenzo Pieralisi
• [RFC PATCH v2 5/5] ARM: mm: update __v7_setup() to the new LoUIS cache maintenance API   Lorenzo Pieralisi
• [RFC PATCH v2 1/5] ARM: mm: implement LoUIS API for cache maintenance ops   Lorenzo Pieralisi
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Lorenzo Pieralisi
• [RFC PATCH v2 3/5] ARM: kernel: update cpu_suspend code to use cache LoUIS operations   Lorenzo Pieralisi
• [RFC PATCH v2 2/5] ARM: mm: rename jump labels in v7_flush_dcache_all function   Lorenzo Pieralisi
• [RFC PATCH v2 0/5] ARM: augment cache flushing API   Lorenzo Pieralisi
• [GIT PULL] ARM: cache flushing LoUIS API   Lorenzo Pieralisi
• [GIT PULL] ARM: cache flushing LoUIS API   Lorenzo Pieralisi
• [GIT PULL] ARM: cache flushing LoUIS API   Lorenzo Pieralisi
• [GIT PULL] ARM: cache flushing LoUIS API v2   Lorenzo Pieralisi
• [GIT PULL] ARM: cache flushing LoUIS API v2   Lorenzo Pieralisi
• [GIT PULL] ARM: cache flushing LoUIS API v2   Lorenzo Pieralisi
• [PATCH v2 RESEND 2/2] ARM: local timers: add timer support using IO mapped register   Lorenzo Pieralisi
• [PATCH] perf: Use pre-empt safe cpu_get/put insted of smp_processor_id   Jean Pihet
• [PATCH] perf: Use pre-empt safe cpu_get/put insted of smp_processor_id   Jean Pihet
• [PATCH v6 0/7] ARM: OMAP2+: PM: introduce the power domains functional states   Jean Pihet
• [PATCH 1/7] ARM: OMAP2+: PM: introduce power domains functional states   Jean Pihet
• [PATCH 2/7] ARM: OMAP2+: PM: add a lock to protect the powerdomains next state   Jean Pihet
• [PATCH 3/7] ARM: OMAP2+: PM: use the functional power states API   Jean Pihet
• [PATCH 4/7] ARM: OMAP2+: PM: use power domain functional state in stats counters   Jean Pihet
• [PATCH 5/7] ARM: OMAP2+: PM debug: trace the functional power domains states   Jean Pihet
• [PATCH 6/7] ARM: OMAP2+: powerdomain: add error logs   Jean Pihet
• [PATCH 7/7] ARM: OMAP2+: PM: reorganize the powerdomain API in public and private parts   Jean Pihet
• [PATCH v6 0/7] ARM: OMAP2+: PM: introduce the power domains functional states   Jean Pihet
• [PATCH 5/7] ARM: OMAP2+: PM debug: trace the functional power domains states   Jean Pihet
• [PATCH 7/7] ARM: OMAP2+: PM: reorganize the powerdomain API in public and private parts   Jean Pihet
• [PATCH 5/7] ARM: OMAP2+: PM debug: trace the functional power domains states   Jean Pihet
• [PATCH] ARM: OMAP: SmartReflex: fix error path in init function   Jean Pihet
• [PATCH v9 0/8] PM QoS: implement the OMAP low level constraints management code   Jean Pihet
• [PATCH 1/8] ARM: OMAP2+: PM QoS: control the power domains next state from the constraints   Jean Pihet
• [PATCH 2/8] ARM: OMAP2+: hwmod: manage the wake-up latency constraints   Jean Pihet
• [PATCH 3/8] ARM: OMAP: omap_device: register to the per-device PM QoS framework   Jean Pihet
• [PATCH 4/8] ARM: OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and CORE constraints   Jean Pihet
• [PATCH 5/8] ARM: OMAP3: update cpuidle latency and threshold figures   Jean Pihet
• [PATCH 6/8] ARM: OMAP3: powerdomain data: add wake-up latency figures   Jean Pihet
• [PATCH 7/8] ARM: OMAP: convert I2C driver to PM QoS for latency constraints   Jean Pihet
• [PATCH 8/8] ARM: OMAP: PM: remove the latency related functions from the API   Jean Pihet
• [PATCH v6 0/7] ARM: OMAP2+: PM: introduce the power domains functional states   Jean Pihet
• [PATCH 7/8] ARM: OMAP: convert I2C driver to PM QoS for latency constraints   Jean Pihet
• [PATCH] ARM: OMAP: hwmod: align the SmartReflex fck names   Jean Pihet
• [PATCH 0/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   Jean Pihet
• [PATCH 1/2] ARM: OMAP: SmartReflex: fix error path in init function   Jean Pihet
• [PATCH 2/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   Jean Pihet
• [PATCH] ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints   Jean Pihet
• [PATCH 2/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   Jean Pihet
• [PATCH 2/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   Jean Pihet
• [PATCH 0/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   Jean Pihet
• [PATCH 1/2] ARM: OMAP: SmartReflex: fix error path in init function   Jean Pihet
• [PATCH 2/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   Jean Pihet
• [PATCH] ARM: OMAP: hwmod: align the SmartReflex fck names   Jean Pihet
• [PATCH] ARM: OMAP: hwmod: align the SmartReflex fck names   Jean Pihet
• [PATCH] ARM: OMAP2+: SmartReflex: fix return value check in sr_dev_init()   Jean Pihet
• [PATCH] ARM: OMAP2+: PM: fix return value check in omap2_set_init_voltage()   Jean Pihet
• [PATCH v5 0/8] ARM: OMAP2+: PM: introduce the power domains functional states   Pihet-XID, Jean
• [PATCH 13/16] ARM: omap: move platform_data definitions   Pihet-XID, Jean
• [PATCH 13/16] ARM: omap: move platform_data definitions   Pihet-XID, Jean
• [PATCH v2 1/9] ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected   Laurent Pinchart
• [PATCH V6 2/2] video: drm: exynos: Add device tree support   Laurent Pinchart
• ARM: hw_breakpoint: silent EPERM when setting ARM_DSCR_MDBGEN on ARM_DEBUG_ARCH_V7_ECP14   Valentin Pistol
• ARM: hw_breakpoint: silent EPERM when setting ARM_DSCR_MDBGEN on ARM_DEBUG_ARCH_V7_ECP14   Valentin Pistol
• Without MACH_ option Early printk (DEBUG_LL)   Nicolas Pitre
• [PATCH 2/2] ARM: allow for ATAGS to be configured out when DT support is selected   Nicolas Pitre
• [PATCH 2/2] ARM: allow for ATAGS to be configured out when DT support is selected   Nicolas Pitre
• [PATCH] ARM: Fix semihosting Kconfig text   Nicolas Pitre
• [PATCH v3 00/31] AArch64 Linux kernel port   Nicolas Pitre
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Nicolas Pitre
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Nicolas Pitre
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Nicolas Pitre
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Nicolas Pitre
• [PATCH v3 02/31] arm64: Kernel booting and initialisation   Nicolas Pitre
• [PATCH] ARM: Dove: allow PCI to be disabled   Nicolas Pitre
• [PATCH] ARM: Dove: allow PCI to be disabled   Nicolas Pitre
• [PATCH v3 09/31] arm64: Cache maintenance routines   Nicolas Pitre
• [PATCH v3 00/31] AArch64 Linux kernel port   Nicolas Pitre
• [PATCH v3 31/31] arm64: MAINTAINERS update   Nicolas Pitre
• [PATCH v2 16/22] ARM: mm: cleanup checks for membank overlap with vmalloc area   Nicolas Pitre
• [PATCH v3 31/31] arm64: MAINTAINERS update   Nicolas Pitre
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Nicolas Pitre
• [PATCH v9 13/13] ARM: consolidate pen_release instead of having per platform definitions   Nicolas Pitre
• [PATCH] of: specify initrd location using 64-bit   Nicolas Pitre
• [PATCH v9 00/13] Per sub-architecture SMP operations   Nicolas Pitre
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Nicolas Pitre
• [PATCH] ARM: Add config option DEBUG_DECOMPRESS_KERNEL   Nicolas Pitre
• [PATCH v2] ARM: l2x0: make background cache ops optional for clean and flush range   Nicolas Pitre
• Bad traps for unaligned access in STM instruction   Nicolas Pitre
• [RFC PATCH v2 1/5] ARM: mm: implement LoUIS API for cache maintenance ops   Nicolas Pitre
• [RFC PATCH v2 2/5] ARM: mm: rename jump labels in v7_flush_dcache_all function   Nicolas Pitre
• [RFC PATCH v2 3/5] ARM: kernel: update cpu_suspend code to use cache LoUIS operations   Nicolas Pitre
• [RFC PATCH v2 4/5] ARM: kernel: update __cpu_disable to use cache LoUIS maintenance API   Nicolas Pitre
• [RFC PATCH v2 5/5] ARM: mm: update __v7_setup() to the new LoUIS cache maintenance API   Nicolas Pitre
• [PATCH 1/4] ARM: mm: use pteval_t to represent page protection values   Nicolas Pitre
• [PATCH v3 02/17] ARM: add self test for runtime patch mechanism   Nicolas Pitre
• [PATCH v3 01/17] ARM: add mechanism for late code patching   Nicolas Pitre
• [PATCH v3 03/17] ARM: use late patch framework for phys-virt patching   Nicolas Pitre
• [PATCH v3 09/17] ARM: LPAE: use phys_addr_t for initrd location and size   Nicolas Pitre
• [PATCH v3 10/17] ARM: LPAE: use phys_addr_t in switch_mm()   Nicolas Pitre
• [PATCH v3 17/17] ARM: mm: clean up membank size limit checks   Nicolas Pitre
• [PATCH v3 10/17] ARM: LPAE: use phys_addr_t in switch_mm()   Nicolas Pitre
• [PATCH v3 RESEND 01/17] ARM: add mechanism for late code patching   Nicolas Pitre
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Nicolas Pitre
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Nicolas Pitre
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Nicolas Pitre
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Nicolas Pitre
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Nicolas Pitre
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Nicolas Pitre
• [PATCH v3 RESEND 05/17] ARM: LPAE: support 64-bit virt_to_phys patching   Nicolas Pitre
• [RFC PATCH 0/3] ARM: uncompress.h multi-platform enablement   Nicolas Pitre
• [PATCH] ARM: ensure vm_struct has its phys_addr member filled in   Nicolas Pitre
• [PATCH] ARM: optimize memset_io()/memcpy_fromio()/memcpy_toio()   Nicolas Pitre
• [PATCH] ARM: Add BUG_ON when hlt counter is wrongly used   Nicolas Pitre
• [PATCHv2 0/4] Add mfd driver for smsc-ece1099 chip   Sourav Poddar
• [PATCHv2 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Sourav Poddar
• [PATCHv2 2/4] Input: keypad: Add smsc ece1099 keypad driver   Sourav Poddar
• [PATCHv2 3/4] arm/dts: omap5-evm: Add keypad support   Sourav Poddar
• [PATCHv2 4/4] gpio: smscece: Add support for gpio IO expander feature   Sourav Poddar
• [PATCHv2 2/4] Input: keypad: Add smsc ece1099 keypad driver   Poddar, Sourav
• [PATCHv2 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Poddar, Sourav
• [PATCHv2 4/4] gpio: smscece: Add support for gpio IO expander feature   Poddar, Sourav
• [PATCH 07/17] Input: omap-keypad: Remove dependencies to mach includes   Poddar, Sourav
• [PATCH 07/17] Input: omap-keypad: Remove dependencies to mach includes   Poddar, Sourav
• [PATCH] serial: omap: Remove unnecessary checks from suspend/resume   Sourav Poddar
• [PATCH] serial: omap: Remove unnecessary checks from suspend/resume   Poddar, Sourav
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Sourav Poddar
• [PATCH] serial: omap: Remove unnecessary checks from suspend/resume   Poddar, Sourav
• [PATCHv2] serial: omap: Remove unnecessary checks from suspend/resume   Sourav Poddar
• [Resend/PATCHv2] serial: omap: Remove unnecessary checks from suspend/resume   Sourav Poddar
• [PATCH] serial: omap: fix the overrun case   Poddar, Sourav
• [PATCH] serial: omap: fix the overrun case   Poddar, Sourav
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Poddar, Sourav
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Poddar, Sourav
• [PATCHv2 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Poddar, Sourav
• [PATCH v2 0/2] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v2 1/2] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v2 2/2] ARM: at91: add at91sam9_wdt driver to at91sam9260   Fabio Porcedda
• [PATCH v2 2/2] ARM: at91: add at91sam9_wdt driver to at91sam9260   Fabio Porcedda
• [PATCH v2 1/2] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v2 2/2] ARM: at91: add at91sam9_wdt driver to at91sam9260   Fabio Porcedda
• [PATCH v3 0/2] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v3 1/2] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v3 2/2] ARM: at91: add at91sam9_wdt driver to at91sam926x, at91sam9g45   Fabio Porcedda
• [PATCH v3 1/2] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v4 0/2] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v4 1/2] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v4 2/2] ARM: at91: add at91sam9_wdt driver to at91sam926x, at91sam9g45   Fabio Porcedda
• [PATCH v3 1/2] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v4 1/2] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v4 2/2] ARM: at91: add at91sam9_wdt driver to at91sam926x, at91sam9g45   Fabio Porcedda
• [PATCH v5 0/3] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v5 1/3] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v5 2/3] ARM: at91/dts: add at91sam9_wdt driver to at91sam926x, at91sam9g45   Fabio Porcedda
• [PATCH v5 3/3] ARM: at91/dts: evk-pro3: enable watchdog   Fabio Porcedda
• [PATCH v4 1/2] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v3 3/3] spi: spi-davinci: convert to DMA engine API   Matt Porter
• [PATCH v3 4/4] arm/dts: Add tps65217 regulator DT data to am335x-bone.dts   Matt Porter
• [PATCH RESEND] arm/dts: AM33XX: Add SPI device tree data   Matt Porter
• [PATCH] ARM: dts: AM33XX: fix gpio node numbering to match hardware   Matt Porter
• [PATCH v3 4/4] arm/dts: Add tps65217 regulator DT data to am335x-bone.dts   Matt Porter
• [PATCH] ARM: dts: AM33XX: fix gpio node numbering to match hardware   Matt Porter
• [PATCH v2 0/2] ARM: dts: AM33xx: Correct gpio labels to match docs   Matt Porter
• [PATCH v2 1/2] ARM: dts: AM33XX: fix gpio node numbering to match hardware   Matt Porter
• [PATCH v2 2/2] ARM: dts: AM33XX: adjust leds to use the corrected gpio label   Matt Porter
• [PATCH] ARM: dts: AM33XX: fix gpio node numbering to match hardware   Matt Porter
• [PATCH v3 0/3] DaVinci DMA engine conversion   Matt Porter
• [PATCH] ARM: dts: AM33XX: fix gpio node numbering to match hardware   Matt Porter
• [PATCH 0/2] Add pinctrl support to omap2-mcspi   Matt Porter
• [PATCH 1/2] spi: omap2-mcspi: add pinctrl support   Matt Porter
• [PATCH 2/2] ARM: OMAP2+: Enable pinctrl dummy states   Matt Porter
• [PATCH 1/2] spi: omap2-mcspi: add pinctrl support   Matt Porter
• [PATCH 2/2] ARM: OMAP2+: Enable pinctrl dummy states   Matt Porter
• [PATCH 2/2] ARM: OMAP2+: Enable pinctrl dummy states   Matt Porter
• [PATCH 2/2] ARM: OMAP2+: Enable pinctrl dummy states   Matt Porter
• [PATCH v2 0/2] Add pinctrl support to omap2-mcspi   Matt Porter
• [PATCH v2 1/2] spi: omap2-mcspi: add pinctrl support   Matt Porter
• [PATCH v2 2/2] ARM: OMAP2+: Enable pinctrl dummy states   Matt Porter
• [PATCH v2 0/2] Add pinctrl support to omap2-mcspi   Matt Porter
• [REPOST PATCH v2 1/2] spi: omap2-mcspi: add pinctrl support   Matt Porter
• [PATCH v2 1/2] spi: omap2-mcspi: add pinctrl support   Matt Porter
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Matt Porter
• [PATCH] dma: edma: fix slave config dependency on direction   Matt Porter
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Matt Porter
• [PATCH] of: dma: fix typos in generic dma binding definition   Matt Porter
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Matt Porter
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Matt Porter
• [PATCH v2] of: dma: fix typos in generic dma binding definition   Matt Porter
• [RFC PATCH 00/13] DMA Engine support for AM33xx   Matt Porter
• [RFC PATCH 01/13] ARM: davinci: move private EDMA API to arm/common   Matt Porter
• [RFC PATCH 02/13] ARM: edma: remove unused transfer controller handlers   Matt Porter
• [RFC PATCH 03/13] ARM: edma: add DT and runtime PM support for AM335x   Matt Porter
• [RFC PATCH 04/13] dmaengine: edma: enable build for AM335x   Matt Porter
• [RFC PATCH 05/13] dma: Add TI EDMA device tree binding   Matt Porter
• [RFC PATCH 06/13] ARM: omap: add hsmmc am33xx specific init   Matt Porter
• [RFC PATCH 07/13] mmc: omap_hsmmc: dma_request_slave_channel() support for DT platforms   Matt Porter
• [RFC PATCH 08/13] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC   Matt Porter
• [RFC PATCH 09/13] mmc: omap_hsmmc: add generic DMA request support to the DT binding   Matt Porter
• [RFC PATCH 10/13] spi: omap2-mcspi: dma_request_slave_channel() support for DT platforms   Matt Porter
• [RFC PATCH 11/13] spi: omap2-mcspi: add generic DMA request support to the DT binding   Matt Porter
• [RFC PATCH 12/13] ARM: dts: add am33xx EDMA support   Matt Porter
• [RFC PATCH 13/13] Documentation: add schedule for removing private EDMA API   Matt Porter
• [RFC PATCH 13/13] Documentation: add schedule for removing private EDMA API   Matt Porter
• [RFC PATCH 00/13] DMA Engine support for AM33xx   Matt Porter
• [RFC PATCH 05/13] dma: Add TI EDMA device tree binding   Matt Porter
• [RFC PATCH 01/13] ARM: davinci: move private EDMA API to arm/common   Matt Porter
• [RFC PATCH 01/13] ARM: davinci: move private EDMA API to arm/common   Matt Porter
• [RFC PATCH 10/13] spi: omap2-mcspi: dma_request_slave_channel() support for DT platforms   Matt Porter
• [RFC PATCH 08/13] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC   Matt Porter
• [RFC PATCH 08/13] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC   Matt Porter
• [RFC PATCH 08/13] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC   Matt Porter
• [RFC PATCH 00/13] DMA Engine support for AM33xx   Matt Porter
• [RFC PATCH 00/13] DMA Engine support for AM33xx   Matt Porter
• [PATCH v2 0/7] uio_pruss cleanup and platform support   Matt Porter
• [PATCH v2 1/7] uio: uio_pruss: replace private SRAM API with genalloc   Matt Porter
• [PATCH v2 2/7] uio: uio_pruss: add support for am33xx   Matt Porter
• [PATCH v2 3/7] uio: dt: add TI PRUSS binding   Matt Porter
• [PATCH v2 4/7] ARM: davinci: Add support for an L3RAM gen_pool   Matt Porter
• [PATCH v2 5/7] ARM: davinci: Add support for PRUSS on DA850   Matt Porter
• [PATCH v2 6/7] ARM: omap: add DT support for deasserting hardware reset lines   Matt Porter
• [PATCH v2 7/7] ARM: dts: AM33xx PRUSS support   Matt Porter
• [PATCH RESEND 0/5] ARM: dts: AM33XX: Add device tree data   Matt Porter
• [PATCH] media: davinci: vpif: display: separate out subdev from output   Prabhakar
• [PATCH v2] media: davinci: vpif: display: separate out subdev from output   Prabhakar
• [PATCH v3] media: davinci: vpif: display: separate out subdev from output   Prabhakar
• [PATCHv5 9/9] arm: vt8500: clk: Add Common Clock Framework support   Tony Prisk
• [PATCHv5 9/9] arm: vt8500: clk: Add Common Clock Framework support   Tony Prisk
• [PATCHv5 9/9] arm: vt8500: clk: Add Common Clock Framework support   Tony Prisk
• [PATCHv5 9/9] arm: vt8500: clk: Add Common Clock Framework support   Tony Prisk
• [PATCH 10/16] ARM: vt8500: move platform_data definitions   Tony Prisk
• [GIT PULL] ARM-SOC: vt8500: convert to devicetree   Tony Prisk
• [GIT PULL RESEND] arm-soc: vt8500: Convert mach-vt8500 to devicetree   Tony Prisk
• [GIT PULL RESEND] arm-soc: vt8500: Convert mach-vt8500 to devicetree   Tony Prisk
• [GIT PULL RESEND] arm-soc: vt8500: Convert mach-vt8500 to devicetree   Tony Prisk
• [GIT PULL RESEND] arm-soc: vt8500: Convert mach-vt8500 to devicetree   Tony Prisk
• vt8500: multiplatform for 3.8   Tony Prisk
• linux-next: manual merge of the arm-soc tree with the tree   Tony Prisk
• linux-next: manual merge of the arm-soc tree with the usb tree   Tony Prisk
• [PATCH] Fixup for v3.7   Tony Prisk
• [PATCH] arm: vt8500: Fixup for missing gpio.h   Tony Prisk
• [PATCH] arm: vt8500: Fixup for missing gpio.h   Tony Prisk
• [PATCH] perf: Use pre-empt safe cpu_get/put insted of smp_processor_id   Roger Quadros
• [PATCH v2] perf: Use pre-empt safe cpu_get/put insted of smp_processor_id   Roger Quadros
• [PATCH v2] perf: Use pre-empt safe cpu_get/put insted of smp_processor_id   Roger Quadros
• [PATCH] perf: Use raw_smp_processor_id insted of smp_processor_id   Roger Quadros
• [PATCH] ARM: OMAP2+: TEMP: Round of the carve out memory requested to section_size   Sricharan R
• [RFC PATCH] ARM: mm: ADD descriptor string to CONFIG_DMA_ADDR_64BIT_T   R, Sricharan
• [RFC PATCH] ARM: mm: ADD descriptor string to CONFIG_DMA_ADDR_64BIT_T   R, Sricharan
• [PATCH v2 1/1] ARM: LPAE: Fix mapping in alloc_init_pte for unaligned addresses.   R, Sricharan
• [PATCH V2] ARM: OMAP: counter: add locking to read_persistent_clock   R, Sricharan
• [RFC 0/5] ARM: dma-mapping: New dma_map_ops to control IOVA more precisely   Krishna Reddy
• [RFC 0/5] ARM: dma-mapping: New dma_map_ops to control IOVA more precisely   Krishna Reddy
• [RFC 0/5] ARM: dma-mapping: New dma_map_ops to control IOVA more precisely   Krishna Reddy
• [PATCH 1/9] pwm i.MX: factor out SoC specific functions   Thierry Reding
• [PATCH v3] pwm i.MX: add devicetree support   Thierry Reding
• [PATCH 8/9] ARM i.MX53: Add pwms to dtsi   Thierry Reding
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Thierry Reding
• [PATCH 8/9] ARM i.MX53: Add pwms to dtsi   Thierry Reding
• [PATCH 5/7] pwm: i.MX: add devicetree support   Thierry Reding
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Thierry Reding
• [PATCH 1/2] PCI: Annotate pci_fixup_irqs with __devinit   Thierry Reding
• [PATCH 2/2] PCI: Provide a default pcibios_update_irq()   Thierry Reding
• [PATCH 0/2] ARM: pci: Prepare for Tegra PCIe controller driver   Thierry Reding
• [PATCH 1/2] ARM: pci: Keep pci_common_init() around after init   Thierry Reding
• [PATCH 2/2] ARM: pci: Allow passing per-controller private data   Thierry Reding
• [PATCH 2/2] PCI: Provide a default pcibios_update_irq()   Thierry Reding
• [PATCH 1/2] PCI: Annotate pci_fixup_irqs with __devinit   Thierry Reding
• [PATCH 2/2] PCI: Provide a default pcibios_update_irq()   Thierry Reding
• [PATCH v2 1/2] PCI: Keep pci_fixup_irqs() around after init   Thierry Reding
• [PATCH v2 2/2] PCI: Provide a default pcibios_update_irq()   Thierry Reding
• [PATCH 5/7] pwm: i.MX: add devicetree support   Thierry Reding
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH] clk: Make the managed clk functions generically available   Thierry Reding
• [PATCH] clk: Make the managed clk functions generically available   Thierry Reding
• [PATCH 1/2] ARM: pci: Keep pci_common_init() around after init   Thierry Reding
• [PATCH 2/2] ARM: pci: Allow passing per-controller private data   Thierry Reding
• [PATCH 2/2] ARM: pci: Allow passing per-controller private data   Thierry Reding
• [PATCH] clk: Make the managed clk functions generically available   Thierry Reding
• [PATCH v2 0/2] ARM: pci: Prepare for Tegra PCIe controller driver   Thierry Reding
• [PATCH v2 1/2] ARM: pci: Keep pci_common_init() around after init   Thierry Reding
• [PATCH v2 2/2] ARM: pci: Allow passing per-controller private data   Thierry Reding
• [PATCH v3 0/2] ARM: pci: Prepare for Tegra PCIe controller driver   Thierry Reding
• [PATCH v3 1/2] ARM: pci: Keep pci_common_init() around after init   Thierry Reding
• [PATCH v3 2/2] ARM: pci: Allow passing per-controller private data   Thierry Reding
• PXA PWM possible regression after 3.5: backlight remains off after resume   Thierry Reding
• [PATCH v2] ARM: pxa: hx4700: Fix backlight PWM device number   Thierry Reding
• [PATCH] ASoC: samsung dma - Don't indicate support for pause/resume.   Dylan Reid
• [PATCH v2] ASoC: samsung dma - Don't indicate support for pause/resume.   Dylan Reid
• [PATCH 1/3] ARM: dts: mxs: Add missing address and size cells in SSP3   Maxime Ripard
• [PATCH 2/3] ARM: dts: mxs Add additionnal muxing options for SSP3   Maxime Ripard
• [PATCH 3/3] dts: mxs: spi: Add SSP3 to the 10049 board   Maxime Ripard
• [PATCHv2 1/3] ARM: dts: mxs: Add missing address and size cells in SSP* nodes   Maxime Ripard
• [PATCHv2 2/3] ARM: dts: mxs Add additionnal muxing options for SSP3   Maxime Ripard
• [PATCHv2 3/3] dts: mxs: spi: Add SSP3 to the 10049 board   Maxime Ripard
• [PATCH 1/3] ARM: dts: mxs: Add missing address and size cells in SSP3   Maxime Ripard
• [PATCH] ARM: dts: mxs: Enable USB1 Host on the CFA-10049 expansion board   Maxime Ripard
• [PATCHv2] ARM: dts: mxs: Enable USB1 Host on the CFA-10049 expansion board   Maxime Ripard
• [PATCHv2 1/3] ARM: dts: mxs: Add missing address and size cells in SSP* nodes   Maxime Ripard
• [PATCHv2 2/3] ARM: dts: mxs Add additionnal muxing options for SSP3   Maxime Ripard
• [PATCHv3 1/2] ARM: dts: mxs: Add missing address and size cells in SSP nodes   Maxime Ripard
• [PATCHv3 2/2] dts: mxs: spi: Add SSP3 to the 10049 board   Maxime Ripard
• [PATCH 1/8] gpio: 74x164: Use module_spi_driver boiler plate function   Maxime Ripard
• [PATCH 2/8] gpio: 74x164: Use devm_kzalloc   Maxime Ripard
• [PATCH 3/8] gpio: 74x164: Remove platform data and use dynamic gpio number assignment   Maxime Ripard
• [PATCH 4/8] gpio: 74x164: Add device tree support   Maxime Ripard
• [PATCH 5/8] gpio: 74x164: Add output pin support   Maxime Ripard
• [PATCH 6/8] gpio: 74x164: Add support for daisy-chaining   Maxime Ripard
• [PATCH 7/8] gpio: 74x164: dts: Add documentation for the dt binding   Maxime Ripard
• [PATCH 8/8] ARM: dts: cfa10049: Add the 74HC595 gpio expanders   Maxime Ripard
• [PATCHv4] Add support for the OLED in the CFA10036   Maxime Ripard
• [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller   Maxime Ripard
• [PATCH 2/2] ARM: dts: mxs: add oled support for the cfa-10036   Maxime Ripard
• [PATCH 5/8] gpio: 74x164: Add output pin support   Maxime Ripard
• [PATCH 1/8] gpio: 74x164: Use module_spi_driver boiler plate function   Maxime Ripard
• [PATCHv2 0/7] gpios: Add daisy-chaining and dt support to 74x164   Maxime Ripard
• [PATCH 1/7] gpio: 74x164: Use module_spi_driver boiler plate function   Maxime Ripard
• [PATCH 2/7] gpio: 74x164: Use devm_kzalloc   Maxime Ripard
• [PATCH 3/7] gpio: 74x164: Use dynamic gpio number assignment if no pdata is present   Maxime Ripard
• [PATCH 4/7] gpio: 74x164: Add device tree support   Maxime Ripard
• [PATCH 5/7] gpio: 74x164: Add support for the daisy-chaining   Maxime Ripard
• [PATCH 6/7] gpio: 74x164: dts: Add documentation for the dt binding   Maxime Ripard
• [PATCH 7/7] ARM: dts: cfa10049: Add the 74HC595 gpio expanders   Maxime Ripard
• [PATCH 7/7] ARM: dts: cfa10049: Add the 74HC595 gpio expanders   Maxime Ripard
• [PATCHv3 0/3] gpios: Add daisy-chaining and dt support to 74x164   Maxime Ripard
• [PATCH 1/3] gpio: 74x164: Add support for the daisy-chaining   Maxime Ripard
• [PATCH 2/3] gpio: 74x164: dts: Add documentation for the dt binding   Maxime Ripard
• [PATCH 3/3] ARM: dts: cfa10049: Add the 74HC595 gpio expanders   Maxime Ripard
• [PATCH 2/3] gpio: 74x164: dts: Add documentation for the dt binding   Maxime Ripard
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Maxime Ripard
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Maxime Ripard
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Maxime Ripard
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Maxime Ripard
• [PATCHv5 0/2] Add support for the OLED in the CFA10036   Maxime Ripard
• [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller   Maxime Ripard
• [PATCH 2/2] ARM: dts: mxs: add oled support for the cfa-10036   Maxime Ripard
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Maxime Ripard
• [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller   Maxime Ripard
• [PATCH 0/3] ARM: I2C: Add device tree bindings to i2c-mux-gpio   Maxime Ripard
• [PATCH 1/3] i2c: i2c-mux-gpio: Use devm_kzalloc instead of kzalloc   Maxime Ripard
• [PATCH 2/3] i2c: mux: Add dt support to i2c-mux-gpio driver   Maxime Ripard
• [PATCH 3/3] ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049   Maxime Ripard
• [PATCHv2 0/3] ARM: I2C: Add device tree bindings to i2c-mux-gpio   Maxime Ripard
• [PATCH 1/3] i2c: i2c-mux-gpio: Use devm_kzalloc instead of kzalloc   Maxime Ripard
• [PATCH 2/3] i2c: mux: Add dt support to i2c-mux-gpio driver   Maxime Ripard
• [PATCH 3/3] ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049   Maxime Ripard
• [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller   Maxime Ripard
• [PATCH 3/3] ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049   Maxime Ripard
• [PATCHv3 0/3] ARM: I2C: Add device tree bindings to i2c-mux-gpio   Maxime Ripard
• [PATCH 1/3] i2c: i2c-mux-gpio: Use devm_kzalloc instead of kzalloc   Maxime Ripard
• [PATCH 2/3] i2c: mux: Add dt support to i2c-mux-gpio driver   Maxime Ripard
• [PATCH 3/3] ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049   Maxime Ripard
• [PATCH] ARM: dts: cfa10049: Add FEC to the CFA-10049 expansion board   Maxime Ripard
• [PATCH 0/2] Add spidev to the CFA-10049   Maxime Ripard
• [PATCH 1/2] spi: spidev: Add device tree bindings   Maxime Ripard
• [PATCH 2/2] ARM: dts: cfa10049: Add spidev to drive the DAC on SSP3   Maxime Ripard
• [PATCH 1/2] hwmon: Add devicetree bindings to gpio-fan   Guenter Roeck
• [PATCH V2 1/2] hwmon: Add devicetree bindings to gpio-fan   Guenter Roeck
• [PATCH] hwmon: (sht15) move header to linux/platform_data/   Guenter Roeck
• [PATCH V3 1/2] hwmon: Add devicetree bindings to gpio-fan   Guenter Roeck
• [PATCH v2 03/13] hwmon: Versatile Express hwmon driver   Guenter Roeck
• [PATCH v2 03/13] hwmon: Versatile Express hwmon driver   Guenter Roeck
• [PATCH v2 03/13] hwmon: Versatile Express hwmon driver   Guenter Roeck
• [PATCH v3] hwmon: Versatile Express hwmon driver   Guenter Roeck
• [PATCH v3] hwmon: Versatile Express hwmon driver   Guenter Roeck
• [PATCH v4] hwmon: Versatile Express hwmon driver   Guenter Roeck
• [PATCH v4] hwmon: Versatile Express hwmon driver   Guenter Roeck
• [PATCH v4] hwmon: Versatile Express hwmon driver   Guenter Roeck
• [PATCH v4] hwmon: Versatile Express hwmon driver   Guenter Roeck
• [RFC 0/5] ARM: dma-mapping: New dma_map_ops to control IOVA more precisely   Joerg Roedel
• [RFC 0/5] ARM: dma-mapping: New dma_map_ops to control IOVA more precisely   Joerg Roedel
• [Query] Does u-boot processes dtb file   Stefan Roese
• [PATCH] ARM: spear6xx: Add X600 (SPEAr600) board support   Stefan Roese
• Bad traps for unaligned access in STM instruction   Lluís Batlle i Rossell
• Bad traps for unaligned access in STM instruction   Lluís Batlle i Rossell
• Bad traps for unaligned access in STM instruction   Lluís Batlle i Rossell
• Bad traps for unaligned access in STM instruction   Lluís Batlle i Rossell
• linux-next: manual merge of the arm-soc tree with the arm-current tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm-current tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm-current tree   Stephen Rothwell
• [PATCH] bus: fix omap compile error if CONFIG_OF is true   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the usb tree   Stephen Rothwell
• linux-next: manual merge of the clk tree with the arm-soc tree   Stephen Rothwell
• Another tree for "next"   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the i2c-embedded tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the mmc tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the input tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the mtd tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the staging tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the char-misc tree   Stephen Rothwell
• linux-next: build failure after merge of the final tree (arm-soc tree related)   Stephen Rothwell
• [PATCH v2 2/2] PCI: Provide a default pcibios_update_irq()   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the sound-asoc tree   Stephen Rothwell
• linux-next: manual merge of the ixp4xx tree with the arm-soc tree   Stephen Rothwell
• [PATCH v2 2/2] PCI: Provide a default pcibios_update_irq()   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the sound tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the sound tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the sound tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the sound tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the v4l-dvb tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the fbdev tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the fbdev tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the pm tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm64 tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the slave-dma tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the slave-dma tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the mmc tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the l2-mtd tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the slave-dma tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the fbdev tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Stephen Rothwell
• linux-next: manual merge of the samsung tree with the arm-soc tree   Stephen Rothwell
• linux-next: Tree for Sept 24 (irqchip)   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the fbdev tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the sound tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the sound tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the l2-mtd tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the usb tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the fbdev tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• linux-next: please clean up the msm tree   Stephen Rothwell
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Alessandro Rubini
• [PATCH 12/16] ARM: nomadik: move platform_data definitions   Alessandro Rubini
• [PATCH 13/24] ARM: nomadik: use __iomem pointers for MMIO   Alessandro Rubini
• [kvmarm] [PATCH 05/15] ARM: Expose PMNC bitfields for KVM use   Rusty Russell
• [PATCH v2 RESEND 2/2] ARM: local timers: add timer support using IO mapped register   Mark Rutland
• [PATCH] ASoC: imx-mc13783: use defines instead of numerical address of register   Philippe Rétornaz
• [RFC PATCH 08/13] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC   S, Venkatraman
• [RFC PATCH 08/13] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC   S, Venkatraman
• [RFC PATCH 08/13] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC   S, Venkatraman
• [PATCH] RTC: TWL: ensure all interrupts are disabled during probe   Steve Sakoman
• [PATCH] RTC: TWL: ensure all interrupts are disabled during probe   Steve Sakoman
• [PATCH] spi: pl022: Add clk_{un}prepare() support in runtime PM   Vipul Kumar Samar
• [PATCH 0/2] ARM: AMBA: Fix clock disable/enable issue in conventional suspend/resume   Vipul Kumar Samar
• [PATCH 1/2] spi:pl022: Disable/Enable functional clock from suspend/resume   Vipul Kumar Samar
• [PATCH 2/2] ARM: ABMA: Disable/Enable interface clock from suspend/resume   Vipul Kumar Samar
• Booting vanilla kernel on the beaglebone   Tim Sander
• [PATCH] MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture   Vincent Sanders
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Wolfram Sang
• [PATCHv7 20/23] i2c: omap: switch to threaded IRQ support   Wolfram Sang
• [PATCHv7 19/23] i2c: omap: always return IRQ_HANDLED   Wolfram Sang
• [PATCHv7 18/23] i2c: omap: remove redundant status read   Wolfram Sang
• [PATCHv7 00/23]I2C big cleanup   Wolfram Sang
• [PATCH v11 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   Wolfram Sang
• [PATCH v3 0/8] i2c: at91: cleanup and dt support   Wolfram Sang
• [PATCHv7 00/23]I2C big cleanup   Wolfram Sang
• [PATCH 12/19] i2c-nomadik: Register sub-devices when passed via Device Tree   Wolfram Sang
• [PATCHv7 20/23] i2c: omap: switch to threaded IRQ support   Wolfram Sang
• [PATCH v3 0/8] i2c: at91: cleanup and dt support   Wolfram Sang
• [PATCHv8 00/23]I2C big cleanup   Wolfram Sang
• [PATCHv7 00/23]I2C big cleanup   Wolfram Sang
• [PATCHv8 00/23]I2C big cleanup   Wolfram Sang
• [PATCH 12/19] i2c-nomadik: Register sub-devices when passed via Device Tree   Wolfram Sang
• [PATCH 12/19] i2c-nomadik: Register sub-devices when passed via Device Tree   Wolfram Sang
• [PATCH 12/19] i2c-nomadik: Register sub-devices when passed via Device Tree   Wolfram Sang
• [PATCH V4] MXS: Implement DMA support into mxs-i2c   Wolfram Sang
• [PATCH V4] MXS: Implement DMA support into mxs-i2c   Wolfram Sang
• [PATCH V4] MXS: Implement DMA support into mxs-i2c   Wolfram Sang
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Wolfram Sang
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Wolfram Sang
• [PATCH] mmc: sdhci / i.MX esdhc buswidth patches   Wolfram Sang
• [GIT PULL 6/7] Samsung cleanup fimd header for v3.7   Florian Tobias Schandinat
• [PATCH V2 0/5] arm: samsung: Move FIMD headers to include/video/   Florian Tobias Schandinat
• [PATCH] video: Remove pnx4008 driver   Florian Tobias Schandinat
• [PATCH 3/5] video: msm: Remove useless mach/* includes   Florian Tobias Schandinat
• [PATCH 1/2] ARM: tegra: fix return value for debugfs init   Peter De Schrijver
• [PATCH 2/2] ARM: tegra: fix debugfs entry for Tegra30   Peter De Schrijver
• [PATCH] ARM: Add config option DEBUG_DECOMPRESS_KERNEL   Maximilian Schwerin
• AW: [PATCH] ARM: Add config option DEBUG_DECOMPRESS_KERNEL   Maximilian Schwerin
• AW: [PATCH] ARM: Add config option DEBUG_DECOMPRESS_KERNEL   Maximilian Schwerin
• [PATCH] mmc: mxs-mmc: implement broken-cd   Matt Sealey
• [PATCH 4/4] efikamx: remove Efika MX-specific CHRGVBUS hack from the USB driver   Matt Sealey
• Tracking down suspend/resume ext3/mmc issues on imx233   Matt Sealey
• [PATCH v3] input: qt1070: Add device tree support   Bo Shen
• [PATCH 1/1] ARM: at91: fix missing #interrupt-cells on gpio-controller   Bo Shen
• [PATCH v3] input: qt1070: Add device tree support   Bo Shen
• [PATCH v3] input: qt1070: Add device tree support   Bo Shen
• [PATCH] i2c: i2c-gpio: fix issue when DT node greater than 1   Bo Shen
• [PATCH] i2c: i2c-gpio: fix issue when DT node greater than 1   Bo Shen
• [PATCH] serial: mxs-auart: put the device when exit or error   Huang Shijie
• [PATCH 1/2] serial: mxs-auart: fix the wrong setting order   Huang Shijie
• [PATCH 2/2] serial: mxs-auart: put the device in mxs_auart_probe()   Huang Shijie
• [PATCH 1/2] serial: mxs-auart: fix the wrong setting order   Huang Shijie
• [PATCH 2/2] serial: mxs-auart: put the device in mxs_auart_probe()   Huang Shijie
• [PATCH] ARM:IMX6Q:use pll2_pfd2_396m as the enfc_sel's parent   Huang Shijie
• [PATCH 0/9] add EDO feature for gpmi-nand driver   Huang Shijie
• [PATCH 1/9] mtd: add helpers to set/get features for ONFI nand   Huang Shijie
• [PATCH 2/9] mtd: add helpers to get the supportted ONFI timing mode   Huang Shijie
• [PATCH 3/9] mtd: gpmi: add a new field for HW_GPMI_TIMING1   Huang Shijie
• [PATCH 4/9] mtd: gpmi: do not get the clock frequency in gpmi_begin()   Huang Shijie
• [PATCH 5/9] mtd: gpmi: add a new field for HW_GPMI_CTRL1   Huang Shijie
• [PATCH 6/9] mtd: gpmi: simplify the setting DLL code   Huang Shijie
• [PATCH 7/9] mtd: gpmi: do not set the default values for the extra clocks   Huang Shijie
• [PATCH 8/9] mtd: gpmi: add EDO feature for imx6q   Huang Shijie
• [PATCH 9/9] mtd: gpmi: initialize the timing registers only one time   Huang Shijie
• [PATCH 3/9] mtd: gpmi: add a new field for HW_GPMI_TIMING1   Huang Shijie
• [PATCH 5/9] mtd: gpmi: add a new field for HW_GPMI_CTRL1   Huang Shijie
• [PATCH 6/9] mtd: gpmi: simplify the setting DLL code   Huang Shijie
• [PATCH 6/9] mtd: gpmi: simplify the setting DLL code   Huang Shijie
• [PATCH 1/2] serial: mxs-auart: fix the wrong setting order   Huang Shijie
• [PATCH v2 0/9] add EDO feature for gpmi-nand driver   Huang Shijie
• [PATCH v2 1/9] mtd: add helpers to set/get features for ONFI nand   Huang Shijie
• [PATCH v2 2/9] mtd: add helpers to get the supportted ONFI timing mode   Huang Shijie
• [PATCH v2 3/9] mtd: gpmi: add a new field for HW_GPMI_TIMING1   Huang Shijie
• [PATCH v2 4/9] mtd: gpmi: do not get the clock frequency in gpmi_begin()   Huang Shijie
• [PATCH v2 5/9] mtd: gpmi: add a new field for HW_GPMI_CTRL1   Huang Shijie
• [PATCH v2 6/9] mtd: gpmi: simplify the setting DLL code   Huang Shijie
• [PATCH v2 7/9] mtd: gpmi: do not set the default values for the extra clocks   Huang Shijie
• [PATCH v2 8/9] mtd: gpmi: add EDO feature for imx6q   Huang Shijie
• [PATCH v2 9/9] mtd: gpmi: initialize the timing registers only one time   Huang Shijie
• [PATCH] ARM: dts: OMAP4: Cleanup and move GIC outside of the OCP node   Shilimkar, Santosh
• [PATCH] ARM: OMAP4: Fix array size for irq_target_cpu   Shilimkar, Santosh
• [PATCH v3 3/3] cpufreq: Add a generic cpufreq-cpu0 driver   Shilimkar, Santosh
• [PATCH] ARM: OMAP4: Fix array size for irq_target_cpu   Shilimkar, Santosh
• [PATCH] ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write   Shilimkar, Santosh
• [PATCH] cpufreq: OMAP: remove redundant loops_per_jiffy code   Shilimkar, Santosh
• Perf doesn't support coresight or it doesn't read the PMU registers on Pandaboard Rev.A2   Shilimkar, Santosh
• [PATCH] ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write   Shilimkar, Santosh
• [PATCH v3 28/31] arm64: Generic timers support   Shilimkar, Santosh
• [PATCH v3 00/31] AArch64 Linux kernel port   Santosh Shilimkar
• [PATCH v3 00/31] AArch64 Linux kernel port   Shilimkar, Santosh
• [PATCH] ARM: smp_twd: reprogram twd based on clk notifier   Shilimkar, Santosh
• [PATCH] ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write   Shilimkar, Santosh
• [PATCH] ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write   Shilimkar, Santosh
• [PATCH V3 0/8] ARM: OMAP4: Add PMU Support   Shilimkar, Santosh
• [PATCH] ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write   Shilimkar, Santosh
• [PATCH 13/16] ARM: omap: move platform_data definitions   Shilimkar, Santosh
• [PATCH 13/16] ARM: omap: move platform_data definitions   Shilimkar, Santosh
• [PATCH] ARM: OMAP2+: TEMP: Round of the carve out memory requested to section_size   Shilimkar, Santosh
• [PATCH] CPUFreq: OMAP: remove unnecessary plat/ includes   Shilimkar, Santosh
• [PATCH] ARM: suspend: use flush range instead of flush all   Shilimkar, Santosh
• [PATCH] ARM: suspend: use flush range instead of flush all   Shilimkar, Santosh
• [PATCH] ARM: suspend: use flush range instead of flush all   Shilimkar, Santosh
• [PATCH] ARM: suspend: use flush range instead of flush all   Shilimkar, Santosh
• [RFC PATCH] ARM: mm: ADD descriptor string to CONFIG_DMA_ADDR_64BIT_T   Shilimkar, Santosh
• [RFC PATCH] ARM: mm: ADD descriptor string to CONFIG_DMA_ADDR_64BIT_T   Shilimkar, Santosh
• [PATCH] CPUFreq: OMAP: remove unnecessary plat/ includes   Shilimkar, Santosh
• [RFC PATCH 4/6] ARM: kernel: update cpu_suspend code to use cache LoUIS operations   Shilimkar, Santosh
• [RFC PATCH 4/6] ARM: kernel: update cpu_suspend code to use cache LoUIS operations   Shilimkar, Santosh
• [PATCH 1/1] drivers: bus: Move the OMAP interconnect driver to drivers/bus/   Santosh Shilimkar
• [GIT PULL] ARM: OMAP5: Enable arch timer support   Santosh Shilimkar
• [GIT PULL] ARM: OMAP5: Enable arch timer support   Shilimkar, Santosh
• [PATCH 1/1] drivers: bus: Move the OMAP interconnect driver to drivers/bus/   Shilimkar, Santosh
• [PATCH 1/1] drivers: bus: Move the OMAP interconnect driver to drivers/bus/   Shilimkar, Santosh
• [PATCH V3 0/8] ARM: OMAP4: Add PMU Support   Shilimkar, Santosh
• [PATCH V3 0/8] ARM: OMAP4: Add PMU Support   Shilimkar, Santosh
• [GIT PULL] ARM: OMAP5: Enable arch timer support   Shilimkar, Santosh
• [PATCH] ARM: OMAP4+: wakeupgen: fix memory corruption   Shilimkar, Santosh
• OMAP baseline test results for v3.6-rc4   Shilimkar, Santosh
• rcu self-detected stall messages on OMAP3, 4 boards   Shilimkar, Santosh
• [PATCH V2] ARM: OMAP2+: Round of the carve out memory requested to section_size   Shilimkar, Santosh
• [GIT PULL] ARM: cache flushing LoUIS API   Shilimkar, Santosh
• [PATCH 2/4] ARM: OMAP: DMA: Move plat/dma hearder to platform_data/dma-omap   Shilimkar, Santosh
• [PATCH 2/4] ARM: OMAP: DMA: Move plat/dma hearder to platform_data/dma-omap   Shilimkar, Santosh
• [PATCH 3/4] ARM: OMAP: Move omap_reserve() locally to mach-omap1/2   Shilimkar, Santosh
• [PATCH 1/2] ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip   Joonyoung Shim
• [PATCH 1/2] ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip   Joonyoung Shim
• [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed   Alexander Shishkin
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Alexander Shishkin
• [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed   Alexander Shishkin
• [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed   Alexander Shishkin
• [PATCH v3] USB: mxs-phy: add basic otg support   Alexander Shishkin
• [PATCH v3] USB: mxs-phy: add basic otg support   Alexander Shishkin
• [PATCH] GPIO: Add support for GPIO on CLPS711X-target platform   Alexander Shiyan
• [PATCH v2] GPIO: Add support for GPIO on CLPS711X-target platform   Alexander Shiyan
• [PATCH v5 1/4] mfd: add syscon driver based on regmap   Sergei Shtylyov
• [PATCH 2/8] gpio: pl061 depends on ARM   Sergei Shtylyov
• [PATCH v4 12/24] xen/arm: introduce CONFIG_XEN on ARM   Sergei Shtylyov
• [PATCH v4 12/24] xen/arm: introduce CONFIG_XEN on ARM   Sergei Shtylyov
• [PATCH] spi: pl022: Add clk_{un}prepare() support in runtime PM   Sergei Shtylyov
• [RFC PATCH 08/10] ARM:davinci - migrating to use davinci_common_clk_init   Sergei Shtylyov
• [PATCH 3/3] ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049   Sergei Shtylyov
• [PATCH 6/6] usb: dwc3: core: add dt support for dwc3 core   Sergei Shtylyov
• [PATCHv7 00/23]I2C big cleanup   Shubhrajyoti
• [PATCH v4 00/21] OMAP UART Patches   Shubhrajyoti
• [PATCH] SPI: OMAP: remove unnecessary includes of plat/clock.h   Shubhrajyoti
• [PATCHv7 20/23] i2c: omap: switch to threaded IRQ support   Shubhrajyoti
• [PATCHv7 19/23] i2c: omap: always return IRQ_HANDLED   Shubhrajyoti
• [PATCHv7 18/23] i2c: omap: remove redundant status read   Shubhrajyoti
• [PATCHv7 00/23]I2C big cleanup   Shubhrajyoti
• [PATCHv8 00/23]I2C big cleanup   Shubhrajyoti
• [PATCHv8 00/23]I2C big cleanup   Shubhrajyoti
• [PATCHv8 00/23]I2C big cleanup   Shubhrajyoti
• [PATCHv8 00/23]I2C big cleanup   Shubhrajyoti
• [PATCH v2 1/2] spi: omap2-mcspi: add pinctrl support   Shubhrajyoti
• [REPOST PATCH v2 1/2] spi: omap2-mcspi: add pinctrl support   Shubhrajyoti
• [PATCH 7/8] ARM: OMAP: convert I2C driver to PM QoS for latency constraints   Shubhrajyoti
• [PATCH] serial: omap: fix the overrun case   Shubhrajyoti
• [PATCH v5 1/4] mfd: add syscon driver based on regmap   Andi Shyti
• [PATCH v5 1/4] mfd: add syscon driver based on regmap   Andi Shyti
• Kernel panic - not syncing: No init found   Baruch Siach
• Kernel panic - not syncing: No init found   Baruch Siach
• [PATCH 2/2] ARM i.MX25: Add devicetree   Baruch Siach
• [PATCH] of: specify initrd location using 64-bit   Sebastian Andrzej Siewior
• [PATCH] of: specify initrd location using 64-bit   Sebastian Andrzej Siewior
• [PATCH 1/2] ARM: LPC32xx: DTS update for devicetree completion of spi-pl022   Alexandre Pereira da Silva
• [PATCH 2/2] ARM: LPC32xx: Platform update for devicetree completion of spi-pl022   Alexandre Pereira da Silva
• [PATCH] spi/pl022: Devicetree support w/o platform data   Alexandre Pereira da Silva
• [PATCH] gpio-lpc32xx: Fix value handling of gpio_direction_output()   Alexandre Pereira da Silva
• [PATCH 04/10] net/macb: Fix a race in macb_start_xmit()   Havard Skinnemoen
• [PATCH 2/4] usb: dwc3: Fix gadget pullup in SS mode   Sonasath, Moiz
• [PATCH 2/4] usb: dwc3: Fix gadget pullup in SS mode   Sonasath, Moiz
• [PATCH 1/3] ARM: PRIMA2: add missing interrupts property for pinctrl node   Barry Song
• [RFC/PATCH] ARM: PRIMA2: initial support for SiRFmarco dual-core SoC   Barry Song
• [RFC/PATCH] ARM: PRIMA2: initial support for SiRFmarco dual-core SoC   Barry Song
• [GIT PULL] CSR SiRFprimaII dt-binding pinmux mapping   Barry Song
• [PATCH] ARM: PRIMA2: rstc: use of_property_read_u32 to replace of_get_property and be32_to_cpup   Barry Song
• [PATCH 1/2] ARM: exynos: delete redundant HAVE_SCHED_CLOCK option in Kconfig   Barry Song
• [PATCH v2] ARM: PRIMA2: rstc: Use helper function to read u32 values   Barry Song
• [PATCH] ARM: PRIMA2: rstc: use of_property_read_u32 to replace of_get_property and be32_to_cpup   Barry Song
• [RFC/PATCH v2] ARM: PRIMA2: initial support for SiRFmarco dual-core SoC   Barry Song
• [PATCH 1/3] dmaengine: sirf: fix a typo in dma_prep_interleaved   Barry Song
• [PATCH 2/3] dmaengine: sirf: fix a typo in moving running dma_desc to active queue   Barry Song
• [PATCH 3/3] dmaengine: sirf: enable the driver support new SiRFmarco SoC   Barry Song
• [PATCH 0/6] pinctrl: sirf: a bundle of fix, cleanup and upgrade   Barry Song
• [PATCH 1/6] pinctrl: sirf: fix a typo in sirfsoc_gpio_probe   Barry Song
• [PATCH 2/6] pinctrl: sirf: add missing pins to pinctrl list   Barry Song
• [PATCH 3/6] pinctrl: sirf: fix spinlock deadlock in sirfsoc_gpio_set_input   Barry Song
• [PATCH 4/6] pinctrl: sirf: initialize the irq_chip pointer of pinctrl_gpio_range   Barry Song
• [PATCH 5/6] pinctrl: sirf: add lost chained_irq_enter and exit in sirfsoc_gpio_handle_irq   Barry Song
• [PATCH 6/6] pinctrl: sirf: enable the driver support new SiRFmarco SoC   Barry Song
• [PATCH 6/6] pinctrl: sirf: enable the driver support new SiRFmarco SoC   Barry Song
• DMA: get data count of descriptor in dmaengine   Song, Elen
• [PATCH] DMA: get current descriptor data transfer count   Song, Elen
• DMA: get data count of descriptor in dmaengine   Song, Elen
• [PATCH v2 5/5] ARM: tegra: enable brcmfmac in defconfig   Arend van Spriel
• [PATCH v2 5/5] ARM: tegra: enable brcmfmac in defconfig   Arend van Spriel
• [RFC PATCH] ARM: mm: ADD descriptor string to CONFIG_DMA_ADDR_64BIT_T   R Sricharan
• [PATCH] ARM: OMAP2+: TEMP: Round of the carve out memory requested to section_size   R Sricharan
• [PATCH V2] ARM: OMAP2+: Round of the carve out memory requested to section_size   R Sricharan
• [PATCH V2] ARM: OMAP: counter: add locking to read_persistent_clock   R Sricharan
• [PATCH V3] ARM: LPAE: Fix mapping in alloc_init_pte for unaligned addresses.   R Sricharan
• [PATCH v3 06/25] docs: Xen ARM DT bindings   Stefano Stabellini
• [PATCH v3 06/25] docs: Xen ARM DT bindings   Stefano Stabellini
• [PATCH v3 06/25] docs: Xen ARM DT bindings   Stefano Stabellini
• [PATCH v3 06/25] docs: Xen ARM DT bindings   Stefano Stabellini
• [PATCH v3 06/25] docs: Xen ARM DT bindings   Stefano Stabellini
• [PATCH v3 00/23] Introduce Xen support on ARM   Stefano Stabellini
• [PATCH v4 00/24] Introduce Xen support on ARM (based on 3.6-rc5)   Stefano Stabellini
• [PATCH v4 01/24] arm: initial Xen support   Stefano Stabellini
• [PATCH v4 02/24] xen/arm: hypercalls   Stefano Stabellini
• [PATCH v4 03/24] xen/arm: page.h definitions   Stefano Stabellini
• [PATCH v4 04/24] xen/arm: sync_bitops   Stefano Stabellini
• [PATCH v4 05/24] xen/arm: empty implementation of grant_table arch specific functions   Stefano Stabellini
• [PATCH v4 06/24] docs: Xen ARM DT bindings   Stefano Stabellini
• [PATCH v4 07/24] xen/arm: Xen detection and shared_info page mapping   Stefano Stabellini
• [PATCH v4 08/24] xen/arm: Introduce xen_pfn_t for pfn and mfn types   Stefano Stabellini
• [PATCH v4 09/24] xen/arm: Introduce xen_ulong_t for unsigned long   Stefano Stabellini
• [PATCH v4 10/24] xen/arm: compile and run xenbus   Stefano Stabellini
• [PATCH v4 11/24] xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM   Stefano Stabellini
• [PATCH v4 12/24] xen/arm: introduce CONFIG_XEN on ARM   Stefano Stabellini
• [PATCH v4 13/24] xen/arm: get privilege status   Stefano Stabellini
• [PATCH v4 14/24] xen/arm: initialize grant_table on ARM   Stefano Stabellini
• [PATCH v4 15/24] xen/arm: receive Xen events on ARM   Stefano Stabellini
• [PATCH v4 16/24] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST   Stefano Stabellini
• [PATCH v4 17/24] xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree   Stefano Stabellini
• [PATCH v4 18/24] xen: allow privcmd for HVM guests   Stefano Stabellini
• [PATCH v4 19/24] xen/arm: compile blkfront and blkback   Stefano Stabellini
• [PATCH v4 20/24] xen/arm: compile netback   Stefano Stabellini
• [PATCH v4 21/24] arm/v2m: initialize arch_timers even if v2m_timer is not present   Stefano Stabellini
• [PATCH v4 22/24] xen: missing includes   Stefano Stabellini
• [PATCH v4 23/24] xen: update xen_add_to_physmap interface   Stefano Stabellini
• [PATCH v4 24/24] MAINTAINERS: add myself as Xen ARM maintainer   Stefano Stabellini
• [PATCH v4 21/24] arm/v2m: initialize arch_timers even if v2m_timer is not present   Stefano Stabellini
• [PATCH v4 00/24] Introduce Xen support on ARM (based on 3.6-rc5)   Stefano Stabellini
• [PATCH v4 02/24] xen/arm: hypercalls   Stefano Stabellini
• [PATCH v4 16/24] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST   Stefano Stabellini
• [PATCH v4 06/24] docs: Xen ARM DT bindings   Stefano Stabellini
• [PATCH v4 16/24] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST   Stefano Stabellini
• [PATCH v4 07/24] xen/arm: Xen detection and shared_info page mapping   Stefano Stabellini
• [PATCH v4 14/24] xen/arm: initialize grant_table on ARM   Stefano Stabellini
• [PATCH v4 14/24] xen/arm: initialize grant_table on ARM   Stefano Stabellini
• [PATCH v4 12/24] xen/arm: introduce CONFIG_XEN on ARM   Stefano Stabellini
• [PATCH v4 10/24] xen/arm: compile and run xenbus   Stefano Stabellini
• [PATCH v4 10/24] xen/arm: compile and run xenbus   Stefano Stabellini
• [PATCH v4 12/24] xen/arm: introduce CONFIG_XEN on ARM   Stefano Stabellini
• [PATCH v4 06/24] docs: Xen ARM DT bindings   Stefano Stabellini
• [PATCH v4 12/24] xen/arm: introduce CONFIG_XEN on ARM   Stefano Stabellini
• [PATCH v4 12/24] xen/arm: introduce CONFIG_XEN on ARM   Stefano Stabellini
• [PATCH v5 00/17] Introduce Xen support on ARM (based on 3.6-rc5)   Stefano Stabellini
• [PATCH v5 01/17] arm: initial Xen support   Stefano Stabellini
• [PATCH v5 02/17] xen/arm: hypercalls   Stefano Stabellini
• [PATCH v5 03/17] xen/arm: page.h definitions   Stefano Stabellini
• [PATCH v5 04/17] xen/arm: sync_bitops   Stefano Stabellini
• [PATCH v5 05/17] xen/arm: empty implementation of grant_table arch specific functions   Stefano Stabellini
• [PATCH v5 06/17] docs: Xen ARM DT bindings   Stefano Stabellini
• [PATCH v5 07/17] xen/arm: Xen detection and shared_info page mapping   Stefano Stabellini
• [PATCH v5 08/17] xen/arm: Introduce xen_ulong_t for unsigned long   Stefano Stabellini
• [PATCH v5 09/17] xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM   Stefano Stabellini
• [PATCH v5 10/17] xen/arm: introduce CONFIG_XEN on ARM   Stefano Stabellini
• [PATCH v5 11/17] xen/arm: get privilege status   Stefano Stabellini
• [PATCH v5 12/17] xen/arm: initialize grant_table on ARM   Stefano Stabellini
• [PATCH v5 13/17] xen/arm: receive Xen events on ARM   Stefano Stabellini
• [PATCH v5 14/17] xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree   Stefano Stabellini
• [PATCH v5 15/17] xen/arm: compile blkfront and blkback   Stefano Stabellini
• [PATCH v5 16/17] xen/arm: compile netback   Stefano Stabellini
• [PATCH v5 17/17] MAINTAINERS: add myself as Xen ARM maintainer   Stefano Stabellini
• [PATCH v5 00/17] Introduce Xen support on ARM (based on 3.6-rc5)   Stefano Stabellini
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Stefano Stabellini
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Stefano Stabellini
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Stefano Stabellini
• [Xen-devel] [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Stefano Stabellini
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Stefano Stabellini
• [Xen-devel] [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Stefano Stabellini
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Stefano Stabellini
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Stefano Stabellini
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Stefano Stabellini
• [PATCH v2] arm: introduce a DTS for Xen unprivileged virtual machines   Stefano Stabellini
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Stefano Stabellini
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Stefano Stabellini
• [PATCH v3 1/1] arm: introduce a DTS for Xen unprivileged virtual machines   Stefano Stabellini
• [PATCH] USB: ohci-at91: fix PIO handling in relation with number of ports   Alan Stern
• [PATCH 1/2] ARM: Kirkwood: ehci-orion: Add device tree binding   Alan Stern
• [PATCH v2] PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled   Alan Stern
• mxc_nand.c on mach-imx/imx53   Roland Stigge
• [PATCH RESEND] video: Remove pnx4008 driver   Roland Stigge
• linux-next: manual merge of the arm-soc tree with the usb tree   Roland Stigge
• [GIT PULL] ARM: LPC32xx: defconfig update   Roland Stigge
• [GIT PULL] ARM: LPC32xx: dts update   Roland Stigge
• [GIT PULL] ARM: LPC32xx: core update   Roland Stigge
• [GIT PULL] ARM: LPC32xx: core update   Roland Stigge
• [PATCH] spi/pl022: Devicetree support w/o platform data   Roland Stigge
• [PATCH 09/19] ARM: ux500: Enable SSP (SPI) for HREF when booting Device Tree   Roland Stigge
• [PATCH 09/19] ARM: ux500: Enable SSP (SPI) for HREF when booting Device Tree   Roland Stigge
• [PATCH] spi/pl022: Devicetree support w/o platform data   Roland Stigge
• [PATCH 1/2] ARM: LPC32xx: DTS update for devicetree completion of spi-pl022   Roland Stigge
• [PATCH 2/2] ARM: LPC32xx: Platform update for devicetree completion of spi-pl022   Roland Stigge
• [PATCH] spi/pl022: Devicetree support w/o platform data   Roland Stigge
• [PATCH v2] spi/pl022: Devicetree support w/o platform data   Roland Stigge
• [PATCH v2] spi/pl022: Devicetree support w/o platform data   Roland Stigge
• Adding new board to Kernel   Roland Stigge
• [PATCH] gpio-lpc32xx: Fix value handling of gpio_direction_output()   Roland Stigge
• [PATCH] video: Remove pnx4008 driver   Roland Stigge
• [PATCH] gpio-lpc32xx: Fix value handling of gpio_direction_output()   Roland Stigge
• [PATCH RESEND] gpio-lpc32xx: Fix value handling of gpio_direction_output()   Roland Stigge
• [PATCH 1/2] gpio-lpc32xx: Add GPI_28   Roland Stigge
• [PATCH 2/2] gpio: Document device_node's det_debounce   Roland Stigge
• [GIT PULL] ARM: LPC32xx: DTS updates #2   Roland Stigge
• [GIT PULL] ARM: LPC32xx: Core updates #2   Roland Stigge
• [GIT PULL] ARM: LPC32xx: core update   Roland Stigge
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 2/2] gpio-max730x: Add block GPIO API   Roland Stigge
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH 12/12] time/jiffies: bring back unconditional LATCH definition   John Stultz
• [PATCH v2] gpio: samsung: add devicetree init for s3c24xx arches   Heiko Stübner
• [PATCH 03/16] ARM: ep93xx: move platform_data definitions   H Hartley Sweeten
• [GIT PULL] DMA-mapping fixes for v3.6   Marek Szyprowski
• Converting OMAP's custom vram allocator   Marek Szyprowski
• [PATCH] arm: mm: fix DMA pool affiliation check   Marek Szyprowski
• Converting OMAP's custom vram allocator   Marek Szyprowski
• [GIT PULL] One more DMA-mapping fix for v3.6   Marek Szyprowski
• [PATCH] ARM: dma-mapping: Fix potential memory leak in atomic_pool_init()   Marek Szyprowski
• How to specify IOMMU'able devices in DT (was: [RFC 0/5] ARM: dma-mapping: New dma_map_ops to control IOVA more precisely)   Marek Szyprowski
• [GIT PULL] DMA-mapping fix for v3.6   Marek Szyprowski
• Tracking down suspend/resume ext3/mmc issues on imx233   Mike Thompson
• Tracking down suspend/resume ext3/mmc issues on imx233   Mike Thompson
• [PATCH 0/4] Add PHY nofity for some i.mx SoCs   Mike Thompson
• [PATCH 5/8] pwm i.MX: add devicetree support   Benoît Thébaudeau
• [PATCH 7/8] pwm i.MX: fix clock lookup   Benoît Thébaudeau
• [PATCH 7/9] pwm i.MX: fix clock lookup   Benoît Thébaudeau
• [PATCH 7/9] pwm i.MX: fix clock lookup   Benoît Thébaudeau
• [PATCH 7/9] pwm i.MX: fix clock lookup   Benoît Thébaudeau
• [PATCH v3 08/14] Input: twl4030-vibra: Support for DT booted kernel   Dmitry Torokhov
• [PATCH 20/24] input: rpcmouse: use __iomem pointers for MMIO   Dmitry Torokhov
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Dmitry Torokhov
• Tracking down suspend/resume ext3/mmc issues on imx233   Theodore Ts'o
• Tracking down suspend/resume ext3/mmc issues on imx233   Theodore Ts'o
• [PATCH 9/15] arch/arm/mach-s3c24xx/mach-h1940.c: removes unnecessary semicolon   Peter Senna Tschudin
• [PATCH 06/10] drivers/video/imxfb.c: fix error return code   Peter Senna Tschudin
• [PATCH 08/10] drivers/video/cyber2000fb.c: fix error return code   Peter Senna Tschudin
• [PATCH] arch/arm/mach-at91/gpio.c: Remove unecessary semicolon   Peter Senna Tschudin
• [PATCH] arch/arm/mach-davinci/board-dm646x-evm.c: Remove unecessary   Peter Senna Tschudin
• [PATCH] arch/arm/mach-omap1/devices.c: Remove unecessary semicolon   Peter Senna Tschudin
• [PATCH] arch/arm/mach-omap2: Remove unecessary semicolon   Peter Senna Tschudin
• [PATCH] arch/arm/plat-mxc/ulpi.c: Remove unecessary semicolon   Peter Senna Tschudin
• [PATCH] arch/arm/plat-omap/omap-pm-noop.c: Remove unecessary semicolon   Peter Senna Tschudin
• [PATCH] arch/arm/mach-davinci/board-dm646x-evm.c: Remove unecessary   Peter Senna Tschudin
• [PATCH v2] arch/arm/mach-davinci/board-dm646x-evm.c: Remove unecessary semicolon   Peter Senna Tschudin
• mxs: mmc: Problems resetting first SSP/MMC module upon boot   Peter Turczak
• mxs: mmc: Problems resetting first SSP/MMC module upon boot   Peter Turczak
• [PATCH] clk: versatile: make config option boolean   Mike Turquette
• [GIT PULL] CSR SiRFmarco preparing patches   Turquette, Mike
• [PATCH] clk: add Loongson1B clock support   Turquette, Mike
• [PATCH v3] clk: add Loongson1B clock support   Turquette, Mike
• [PATCH v2 1/4] clk: add of_clk_src_onecell_get() support   Mike Turquette
• [PATCH V2 0/4] clk: Convert ARM ux500 to common clock   Mike Turquette
• [PATCH 0/1] clk: add DT fixed-factor-clock binding support   Mike Turquette
• [PATCH 1/4] clk: Provide option for clk_get_rate to issue hw for new rate   Mike Turquette
• [PATCH 1/4] clk: Provide option for clk_get_rate to issue hw for new rate   Turquette, Mike
• [PATCH v2 1/4] clk: add of_clk_src_onecell_get() support   Mike Turquette
• [PATCH RFC] clk: use spinlock for clk_get_rate   Mike Turquette
• [PATCH RFC] clk: use spinlock for clk_get_rate   Mike Turquette
• [PATCH] ARM: smp_twd: reprogram twd based on clk notifier   Mike Turquette
• linux-next: manual merge of the clk tree with the arm-soc tree   Mike Turquette
• [PATCH v2 1/4] clk: add of_clk_src_onecell_get() support   Mike Turquette
• [PATCH 05/11] clk: Versatile Express clock generators ("osc") driver   Mike Turquette
• [PATCH 06/11] clk: Common clocks implementation for Versatile Express   Mike Turquette
• [PATCHv5 9/9] arm: vt8500: clk: Add Common Clock Framework support   Mike Turquette
• [PATCH 2/2] ARM: tegra: cpu-tegra: explicitly manage re-parenting   Mike Turquette
• [PATCH] i.MX: remove legacy clock support   Mike Turquette
• [PATCH 2/2] ARM: tegra: cpu-tegra: explicitly manage re-parenting   Mike Turquette
• [PATCHv5 9/9] arm: vt8500: clk: Add Common Clock Framework support   Mike Turquette
• [PATCH 05/11] clk: Versatile Express clock generators ("osc") driver   Mike Turquette
• [PATCH 2/2] ARM: tegra: cpu-tegra: explicitly manage re-parenting   Turquette, Mike
• [PATCH] ARM: smp_twd: reprogram twd based on clk notifier   Mike Turquette
• [PATCH v2] ARM: smp_twd: reprogram twd based on clk notifier   Mike Turquette
• [GIT PULL 3/4] mxs clk device tree lookup   Turquette, Mike
• [PATCH] ARM: Tegra: Add smp_twd clock for Tegra20   Mike Turquette
• [PATCH v2] ARM: smp_twd: reprogram twd based on clk notifier   Mike Turquette
• [PATCH V5 4/5] ARM: bcm2835: add stub clock driver   Mike Turquette
• [PATCH V6] ARM: bcm2835: add stub clock driver   Mike Turquette
• [PATCH 3/4] mfd: dbx500: Provide a more accurate smp_twd clock   Mike Turquette
• [PATCH 2/3] clk: Add devm_clk_{register,unregister}()   Mike Turquette
• [PATCH 00/10] Convert MSM to common clock framework   Mike Turquette
• [PATCH 2/3] clk: ux500: Support prcmu ape opp voltage clock   Mike Turquette
• [GIT PULL] Versatile Express clk   Mike Turquette
• [PATCH 2/3] clk: ux500: Support prcmu ape opp voltage clock   Mike Turquette
• [RFC update 0/2] dmaengine/ASoC: omap: Enable element mode in cyclic DMA   Peter Ujfalusi
• [RFC update 1/2] dmaengine: omap: Support for element mode in cyclic DMA   Peter Ujfalusi
• [RFC update 2/2] ASoC: omap-pcm: Do not check DMA sync_mode   Peter Ujfalusi
• [alsa-devel] [RFC 1/3] ASoC: dmaengine: Don't use runtime private data for dmaengine data   Peter Ujfalusi
• [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Peter Ujfalusi
• [RFC PATCH] ARM: OMAP2+: omap-device: Do not overwrite resources allocated by OF layer   Peter Ujfalusi
• [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Peter Ujfalusi
• [PATCH v3 0/8] ARM/dts: OMAP audio related updates for OMAP2/3/4/5   Peter Ujfalusi
• [PATCH v3 1/8] ARM/dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Peter Ujfalusi
• [PATCH v3 2/8] ARM/dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2   Peter Ujfalusi
• [PATCH v3 3/8] ARM/dts: omap3: Add McBSP entries   Peter Ujfalusi
• [PATCH v3 4/8] ARM/dts: omap4: Add McBSP entries   Peter Ujfalusi
• [PATCH v3 5/8] ARM/dts: omap4: Add reg-names for McPDM and DMIC   Peter Ujfalusi
• [PATCH v3 6/8] ARM/dts: omap5: Add McBSP entries   Peter Ujfalusi
• [PATCH v3 7/8] ARM/dts: omap5: Add McPDM and DMIC section to the dtsi file   Peter Ujfalusi
• [PATCH v3 8/8] ARM/dts: omap3-beagle: Enable audio support   Peter Ujfalusi
• [PATCH 5/9] ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end   Peter Ujfalusi
• [PATCH v3 00/14] MFD/ASoC/Input: twl4030-audio submodule DT support   Peter Ujfalusi
• [PATCH v3 01/14] MFD: twl4030-audio: Clean up MODULE_* and platform_driver part   Peter Ujfalusi
• [PATCH v3 02/14] MFD: twl4030-audio: Convert to use devm_kzalloc   Peter Ujfalusi
• [PATCH v3 03/14] MFD: twl4030-audio: Rearange and clean-up the probe function   Peter Ujfalusi
• [PATCH v3 04/14] MFD: twl-core: Add API to query the HFCLK rate   Peter Ujfalusi
• [PATCH v3 05/14] MFD: twl4030-audio: Get audio MCLK via twl-core API instead of pdata   Peter Ujfalusi
• [PATCH v3 06/14] dt: Add empty of_find_node_by_name() function   Peter Ujfalusi
• [PATCH v3 07/14] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH v3 08/14] Input: twl4030-vibra: Support for DT booted kernel   Peter Ujfalusi
• [PATCH v3 09/14] ASoC: twl4030: Move hs_extmute GPIO handling to driver   Peter Ujfalusi
• [PATCH v3 10/14] ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIO   Peter Ujfalusi
• [PATCH v3 11/14] ASoC/MFD: twl4030: Remove set_hs_extmute callback from platform data   Peter Ujfalusi
• [PATCH v3 12/14] ASoC: twl4030: Convert to use devm_kzalloc   Peter Ujfalusi
• [PATCH v3 13/14] ASoC: twl4030: Add pointer to pdata within the private data   Peter Ujfalusi
• [PATCH v3 14/14] ASoC: twl4030: Support for DT booted kernel   Peter Ujfalusi
• [PATCH 0/2] ARM/dts: omap4 boards: Enable the use of GPO on twl6040   Peter Ujfalusi
• [PATCH 1/2] ARM/dts: omap4-sdp: Enable GPO functionality for twl6040   Peter Ujfalusi
• [PATCH 2/2] ARM/dts: omap4-panda: Enable GPO functionality for twl6040   Peter Ujfalusi
• [PATCH v2 0/3] MFD/GPIO: Add twl6040 GPO driver   Peter Ujfalusi
• [PATCH v3 08/14] Input: twl4030-vibra: Support for DT booted kernel   Peter Ujfalusi
• [alsa-devel] [RFC update 0/2] dmaengine/ASoC: omap: Enable element mode in cyclic DMA   Peter Ujfalusi
• [PATCH v4 00/14] MFD/ASoC/Input: twl4030-audio submodule DT support   Peter Ujfalusi
• [PATCH v4 01/14] MFD: twl4030-audio: Clean up MODULE_* and platform_driver part   Peter Ujfalusi
• [PATCH v4 02/14] MFD: twl4030-audio: Convert to use devm_kzalloc   Peter Ujfalusi
• [PATCH v4 03/14] MFD: twl4030-audio: Rearange and clean-up the probe function   Peter Ujfalusi
• [PATCH v4 04/14] MFD: twl-core: Add API to query the HFCLK rate   Peter Ujfalusi
• [PATCH v4 05/14] MFD: twl4030-audio: Get audio MCLK via twl-core API instead of pdata   Peter Ujfalusi
• [PATCH v4 06/14] dt: Add empty of_find_node_by_name() function   Peter Ujfalusi
• [PATCH v4 07/14] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH v4 08/14] Input: twl4030-vibra: Support for DT booted kernel   Peter Ujfalusi
• [PATCH v4 09/14] ASoC: twl4030: Move hs_extmute GPIO handling to driver   Peter Ujfalusi
• [PATCH v4 10/14] ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIO   Peter Ujfalusi
• [PATCH v4 11/14] ASoC/MFD: twl4030: Remove set_hs_extmute callback from platform data   Peter Ujfalusi
• [PATCH v4 12/14] ASoC: twl4030: Convert to use devm_kzalloc   Peter Ujfalusi
• [PATCH v4 13/14] ASoC: twl4030: Add pointer to pdata within the private data   Peter Ujfalusi
• [PATCH v4 14/14] ASoC: twl4030: Support for DT booted kernel   Peter Ujfalusi
• [PATCH v3 1/8] ARM/dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Peter Ujfalusi
• [PATCH 13/16] ARM: omap: move platform_data definitions   Peter Ujfalusi
• [PATCH 00/11] ASoC: OMAP: Convert to use dmaengine   Peter Ujfalusi
• [PATCH 01/11] dmaengine: omap: Support for element mode in cyclic DMA   Peter Ujfalusi
• [PATCH 02/11] ASoC: omap-mcbsp: Use sDMA packet mode instead of frame mode   Peter Ujfalusi
• [PATCH 03/11] ASoC: omap-pcm: Select sDMA synchronization based on packet_size   Peter Ujfalusi
• [PATCH 04/11] ASoC: OMAP: Remove sync_mode from omap_pcm_dma_data struct   Peter Ujfalusi
• [PATCH 05/11] ASoC: omap-pcm: Prepare to configure the DMA data_type based on stream properties   Peter Ujfalusi
• [PATCH 06/11] ARM: OMAP4: hwmod_data: Add resource names to McPDM memory ranges   Peter Ujfalusi
• [PATCH 07/11] ASoC: omap-mcpdm: Use platform_get_resource_* to get resources   Peter Ujfalusi
• [PATCH 08/11] ASoC: OMAP: mcbsp, mcpdm, dmic: Let omap-pcm to pick the dma_type   Peter Ujfalusi
• [PATCH 09/11] ASoC: omap-pcm, omap-hdmi: Change the use of omap_pcm_dma_data->data_type   Peter Ujfalusi
• [PATCH 10/11] ASoC: OMAP: mcbsp, mcpdm, dmic, hdmi: Set dma_data at startup time   Peter Ujfalusi
• [PATCH 11/11] ASoC: omap-pcm: Convert to use dmaengine   Peter Ujfalusi
• [PATCH 11/11] ASoC: omap-pcm: Convert to use dmaengine   Peter Ujfalusi
• [PATCH 11/11] ASoC: omap-pcm: Convert to use dmaengine   Peter Ujfalusi
• [PATCH 00/11] ASoC: OMAP: Convert to use dmaengine   Peter Ujfalusi
• [PATCH v2 00/15] ASoC: OMAP: Convert to use dmaengine   Peter Ujfalusi
• [PATCH v2 01/15] dmaengine: omap: Support for element mode in cyclic DMA   Peter Ujfalusi
• [PATCH v2 02/15] dmaengine: omap: Add support for pause/resume in cyclic dma mode   Peter Ujfalusi
• [PATCH v2 03/15] dmaengine: Add no_wakeup parameter to dmaengine_prep_dma_cyclic()   Peter Ujfalusi
• [PATCH v2 04/15] dmaengine: Pass no_wakeup parameter via device_prep_dma_cyclic() callback   Peter Ujfalusi
• [PATCH v2 05/15] dmaengine: omap-dma: Add support for no_wakeup in cyclic mode   Peter Ujfalusi
• [PATCH v2 06/15] ASoC: omap-mcbsp: Use sDMA packet mode instead of frame mode   Peter Ujfalusi
• [PATCH v2 07/15] ASoC: omap-pcm: Select sDMA synchronization based on packet_size   Peter Ujfalusi
• [PATCH v2 08/15] ASoC: OMAP: Remove sync_mode from omap_pcm_dma_data struct   Peter Ujfalusi
• [PATCH v2 09/15] ASoC: omap-pcm: Prepare to configure the DMA data_type based on stream properties   Peter Ujfalusi
• [PATCH v2 10/15] ARM: OMAP4: hwmod_data: Add resource names to McPDM memory ranges   Peter Ujfalusi
• [PATCH v2 11/15] ASoC: omap-mcpdm: Use platform_get_resource_* to get resources   Peter Ujfalusi
• [PATCH v2 12/15] ASoC: OMAP: mcbsp, mcpdm, dmic: Let omap-pcm to pick the dma_type   Peter Ujfalusi
• [PATCH v2 13/15] ASoC: omap-pcm, omap-dmic: Change the use of omap_pcm_dma_data->data_type   Peter Ujfalusi
• [PATCH v2 14/15] ASoC: OMAP: mcbsp, mcpdm, dmic, hdmi: Set dma_data at startup time   Peter Ujfalusi
• [PATCH v2 15/15] ASoC: omap-pcm: Convert to use dmaengine   Peter Ujfalusi
• [PATCH v2 04/15] dmaengine: Pass no_wakeup parameter via device_prep_dma_cyclic() callback   Peter Ujfalusi
• [PATCH v2 03/15] dmaengine: Add no_wakeup parameter to dmaengine_prep_dma_cyclic()   Peter Ujfalusi
• [PATCH v2 03/15] dmaengine: Add no_wakeup parameter to dmaengine_prep_dma_cyclic()   Peter Ujfalusi
• [alsa-devel] [PATCH v2 03/15] dmaengine: Add no_wakeup parameter to dmaengine_prep_dma_cyclic()   Peter Ujfalusi
• [PATCH v2 03/15] dmaengine: Add no_wakeup parameter to dmaengine_prep_dma_cyclic()   Peter Ujfalusi
• [PATCH v3 00/15] ASoC: OMAP: Convert to use dmaengine   Peter Ujfalusi
• [PATCH v3 01/15] dmaengine: omap: Support for element mode in cyclic DMA   Peter Ujfalusi
• [PATCH v3 02/15] dmaengine: omap: Add support for pause/resume in cyclic dma mode   Peter Ujfalusi
• [PATCH v3 03/15] dmaengine: Add flags parameter to dmaengine_prep_dma_cyclic()   Peter Ujfalusi
• [PATCH v3 04/15] dmaengine: Pass flags via device_prep_dma_cyclic() callback   Peter Ujfalusi
• [PATCH v3 05/15] dmaengine: omap-dma: Add support to suppress interrupts in cyclic mode   Peter Ujfalusi
• [PATCH v3 06/15] ASoC: omap-mcbsp: Use sDMA packet mode instead of frame mode   Peter Ujfalusi
• [PATCH v3 07/15] ASoC: omap-pcm: Select sDMA synchronization based on packet_size   Peter Ujfalusi
• [PATCH v3 08/15] ASoC: OMAP: Remove sync_mode from omap_pcm_dma_data struct   Peter Ujfalusi
• [PATCH v3 09/15] ASoC: omap-pcm: Prepare to configure the DMA data_type based on stream properties   Peter Ujfalusi
• [PATCH v3 10/15] ARM: OMAP4: hwmod_data: Add resource names to McPDM memory ranges   Peter Ujfalusi
• [PATCH v3 11/15] ASoC: omap-mcpdm: Use platform_get_resource_* to get resources   Peter Ujfalusi
• [PATCH v3 12/15] ASoC: OMAP: mcbsp, mcpdm, dmic: Let omap-pcm to pick the dma_type   Peter Ujfalusi
• [PATCH v3 13/15] ASoC: omap-pcm, omap-dmic: Change the use of omap_pcm_dma_data->data_type   Peter Ujfalusi
• [PATCH v3 14/15] ASoC: OMAP: mcbsp, mcpdm, dmic, hdmi: Set dma_data at startup time   Peter Ujfalusi
• [PATCH v3 15/15] ASoC: omap-pcm: Convert to use dmaengine   Peter Ujfalusi
• [PATCH] CLK: clk-twl6040: Initial clock driver for OMAP4+ McPDM fclk clock   Peter Ujfalusi
• [PATCH v2 04/15] dmaengine: Pass no_wakeup parameter via device_prep_dma_cyclic() callback   Peter Ujfalusi
• [PATCH v3 02/15] dmaengine: omap: Add support for pause/resume in cyclic dma mode   Peter Ujfalusi
• [alsa-devel] [PATCH v3 00/15] ASoC: OMAP: Convert to use dmaengine   Peter Ujfalusi
• [PATCH 13/16] ARM: omap: move platform_data definitions   Peter Ujfalusi
• [PATCH v4 00/14] MFD/ASoC/Input: twl4030-audio submodule DT support   Peter Ujfalusi
• [PATCH 0/2] ARM/dts: OMAP4: Enable twl6040 GPO functionality   Peter Ujfalusi
• [PATCH 1/2] ARM/dts: omap4-sdp: Enable GPO functionality for twl6040   Peter Ujfalusi
• [PATCH 2/2] ARM/dts: omap4-panda: Enable GPO functionality for twl6040   Peter Ujfalusi
• [PATCH 08/29] ARM: OMAP2+: Make board-zoom.h local   Peter Ujfalusi
• [PATCH v3] ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus   Peter Ujfalusi
• [PATCH v3] ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus   Peter Ujfalusi
• [PATCHv7 17/21] ARM: OMAP4: TWL: enable high speed mode for PMIC communication   Peter Ujfalusi
• [PATCHv7 17/21] ARM: OMAP4: TWL: enable high speed mode for PMIC communication   Peter Ujfalusi
• [PATCH 4/4] ARM: ks8695: convert to generic time and clocksource   Greg Ungerer
• [PATCH v2] ARM: ks8695: convert to generic time and clocksource   Greg Ungerer
• [PATCH v2] ARM: ks8695: convert to generic time and clocksource   Greg Ungerer
• [PATCH 4/4] ARM: ks8695: convert to generic time and clocksource   Greg Ungerer
• [PATCH v2] ARM: ks8695: convert to generic time and clocksource   Greg Ungerer
• [PATCH 4/4] ARM: ks8695: convert to generic time and clocksource   Greg Ungerer
• [PATCH 4/4] ARM: ks8695: convert to generic time and clocksource   Greg Ungerer
• [PATCH 4/4 v3] ARM: ks8695: convert to generic time and clocksource   Greg Ungerer
• [PATCH v2] ARM: ks8695: convert to generic time and clocksource   Greg Ungerer
• [PATCH 4/4 v4] ARM: ks8695: convert to generic time and clocksource   Greg Ungerer
• [PATCH 4/4 v3] ARM: ks8695: convert to generic time and clocksource   Greg Ungerer
• [PATCH 4/4 v5] ARM: ks8695: convert to generic time and clocksource   Greg Ungerer
• [PATCH 4/4] ARM: ks8695: convert to generic time and clocksource   Greg Ungerer
• [PATCH] ARM: ks8695: add board support for the OpenGear boards based on the KS8695   Greg Ungerer
• [PATCH] ARM: ixp4xx: move fixed mapping of internal devices into vmalloc region   Greg Ungerer
• [PATCH] ARM: ks8695: add board support for the OpenGear boards based on the KS8695   Greg Ungerer
• [PATCH] ARM: ks8695: add board support for the OpenGear boards based on the KS8695   Greg Ungerer
• [PATCH] clk: Make the managed clk functions generically available   Greg Ungerer
• [PATCH] ARM: add back in KS8695 based SnapGear board entries   Greg Ungerer
• [PATCH] clk: Make the managed clk functions generically available   Greg Ungerer
• [PATCH] ARM: ks8695: add board support for the OpenGear boards based on the KS8695   Greg Ungerer
• [PATCH] clk: Make the managed clk functions generically available   Greg Ungerer
• [PATCH] ARM: add back in KS8695 based SnapGear board entries   Greg Ungerer
• [PATCH] of: specify initrd location using 64-bit   Geert Uytterhoeven
• [PATCH 2/2] PCI: Provide a default pcibios_update_irq()   Geert Uytterhoeven
• Converting OMAP's custom vram allocator   Tomi Valkeinen
• Converting OMAP's custom vram allocator   Tomi Valkeinen
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Tomi Valkeinen
• [PATCH 1/6] OMAPDSS: remove unnecessary plat/clock.h includes   Tomi Valkeinen
• MX28 & finding out boot mode   Marek Vasut
• [PATCH 0/4] mxs/spi: Fixes and improvements   Marek Vasut
• [PATCH 1/4] mxs/spi: Fix issues when doing long continuous transfer   Marek Vasut
• [PATCH 2/4] mxs/spi: Increment the transfer length only if transfer succeeded   Marek Vasut
• [PATCH 3/4] mxs/spi: Decrement the DMA/PIO border   Marek Vasut
• [PATCH 4/4] mxs/spi: Rework the mxs_ssp_timeout to be more readable   Marek Vasut
• [PATCH] mxs/dma: Enlarge the CCW descriptor area to 4 pages   Marek Vasut
• [PATCH] mxs/dma: Enlarge the CCW descriptor area to 4 pages   Marek Vasut
• [PATCH] arm: mxs: Fix MMC WP pin being inverted   Marek Vasut
• [PATCH] ARM: dts: m28evk: Fix MMC WP pin being inverted   Marek Vasut
• [PATCH] arm: mxs: Fix MMC WP pin being inverted   Marek Vasut
• [PATCH] mxs/dma: Enlarge the CCW descriptor area to 4 pages   Marek Vasut
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Marek Vasut
• [PATCH] arm: mxs: Fix MMC WP pin being inverted   Marek Vasut
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Marek Vasut
• [PATCH 0/4] mxs/spi: Fixes and improvements   Marek Vasut
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Marek Vasut
• [PATCH] arm: mxs: Fix MMC WP pin being inverted   Marek Vasut
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Marek Vasut
• [PATCH 07/16] ARM: pxa: move platform_data definitions   Marek Vasut
• [PATCH] ARM: dts: mxs: Add ethernetX to macX aliases   Marek Vasut
• [PATCH] mxs/dma: Enlarge the CCW descriptor area to 4 pages   Marek Vasut
• [PATCH V4] MXS: Implement DMA support into mxs-i2c   Marek Vasut
• [PATCH V4] MXS: Implement DMA support into mxs-i2c   Marek Vasut
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Marek Vasut
• [PATCH v2 RESEND] USB: chipidea: convert to use devm_request_irq   Marek Vasut
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Marek Vasut
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Marek Vasut
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Marek Vasut
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Marek Vasut
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Marek Vasut
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Marek Vasut
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Marek Vasut
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Marek Vasut
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Marek Vasut
• [PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading   Marek Vasut
• [PATCH] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Marek Vasut
• [PATCH 2/3] phy/micrel: Rename KS80xx to KSZ80xx   Marek Vasut
• [PATCH 2/3 V2] phy/micrel: Rename KS80xx to KSZ80xx   Marek Vasut
• [PATCH 2/3 V3] phy/micrel: Rename KS80xx to KSZ80xx   Marek Vasut
• [PATCH 2/3 V4] phy/micrel: Rename KS80xx to KSZ80xx   Marek Vasut
• [PATCH] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Marek Vasut
• [PATCH] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Marek Vasut
• [PATCH V2] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Marek Vasut
• [PATCH V2] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Marek Vasut
• [PATCH V2] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Marek Vasut
• [PATCH V2] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Marek Vasut
• [PATCH] ARM: mxs_defconfig: Improve USB related support   Marek Vasut
• DA9053 support on mx53qsb   Marek Vasut
• [PATCH 1/3] ARM: dts: imx53-qsb: Use pinctrl for gpio-led   Marek Vasut
• [PATCH 2/3] ARM: dts: imx53-qsb: Make DA9053 regulator functional   Marek Vasut
• [PATCH 3/3] ARM: imx_v6_v7_defconfig: Add DA9052 regulator support   Marek Vasut
• [PATCH V4] MXS: Implement DMA support into mxs-i2c   Marek Vasut
• [PATCH 2/3] ARM: dts: imx53-qsb: Make DA9053 regulator functional   Marek Vasut
• [PATCHv2 2/2] msm: io: Change the default static iomappings to be shared   Rohit Vaswani
• [PATCHv3 2/2] msm: io: Change the default static iomappings to be shared   Rohit Vaswani
• [PATCH v4 1/2] ARM: arch_timers: enable the use of the virtual timer   Rohit Vaswani
• [PATCH v2 1/2] ARM: arch timer: Set the TVAL before timer is enabled   Rohit Vaswani
• [PATCH v2 2/2] ARM: local timers: add timer support using IO mapped register   Rohit Vaswani
• [PATCH v2 RESEND 1/2] ARM: arch timer: Set the TVAL before timer is enabled   Rohit Vaswani
• [PATCH v2 RESEND 2/2] ARM: local timers: add timer support using IO mapped register   Rohit Vaswani
• [PATCH v2 RESEND 1/2] ARM: arch timer: Set the TVAL before timer is enabled   Rohit Vaswani
• [PATCH 4/5] gpio: Make gpio-msm-v1 into a platform driver   Rohit Vaswani
• [PATCH v2 RESEND 2/2] ARM: local timers: add timer support using IO mapped register   Rohit Vaswani
• [PATCH 0/3] gpio-twl4030: add new device tree properties   Florian Vaussard
• [PATCH 1/3] gpio-twl4030: get platform data from device tree   Florian Vaussard
• [PATCH 2/3] gpio-twl4030: new dt properties for BeagleBoard and omap3-EVM   Florian Vaussard
• [PATCH 3/3] gpio-twl4030: updates the bindings for new dt properties   Florian Vaussard
• [PATCH 0/3] gpio-twl4030: add new device tree properties   Florian Vaussard
• [PATCH 1/3] gpio-twl4030: get platform data from device tree   Florian Vaussard
• [PATCH v2 0/2] gpio-twl4030: add new device tree properties   Florian Vaussard
• [PATCH 1/2] gpio/twl4030: get platform data from device tree   Florian Vaussard
• [PATCH 2/2] ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM   Florian Vaussard
• [PATCH 1/2] gpio/twl4030: get platform data from device tree   Florian Vaussard
• [PATCH v8 0/3] GPMC driver conversion   Florian Vaussard
• [PATCH 1/2] gpio/twl4030: get platform data from device tree   Florian Vaussard
• [PATCH 0/2] ARM: omap/dts: Add support for Gumstix Overo with Tobi expansion   Florian Vaussard
• [PATCH 0/2] ARM: omap/dts: Add support for Gumstix Overo with Tobi expansion   Florian Vaussard
• [PATCH 0/2] ARM: omap/dts: Add support for Gumstix Overo with Tobi expansion   Florian Vaussard
• [PATCH 0/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo   Florian Vaussard
• [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo   Florian Vaussard
• [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo   Florian Vaussard
• [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo   Florian Vaussard
• [PATCH V2] ASoC: SAMSUNG: Add DT support for i2s   Padma Venkat
• [PATCH V2] ASoC: SAMSUNG: Add DT support for i2s   Padma Venkat
• [PATCH V2] ARM: EXYNOS5: Add I2S SFR base addresses   Padmavathi Venna
• [PATCH V2] ARM: EXYNOS5: Add clocks for EXYNOS5 Audio Subsystem.   Padmavathi Venna
• [PATCH V2] ASoC: SAMSUNG: Add DT support for i2s   Padmavathi Venna
• [PATCH V1 0/2] ARM: Exynos: Enable I2S platform support for Exynos5   Padmavathi Venna
• [PATCH V1 1/2] ARM: dts: Add nodes for i2s controllers for Samsung Exynos5 platforms   Padmavathi Venna
• [PATCH V1 2/2] ARM: EXYNOS: Enable platform support for I2S controllers   Padmavathi Venna
• [PATCH V1 0/5] Avoid passing clks through platform data   Padmavathi Venna
• [PATCH 1/5] ARM: S3C64XX: Add I2S clkdev support   Padmavathi Venna
• [PATCH 2/5] ARM: S5PC100: Add I2S clkdev support   Padmavathi Venna
• [PATCH 3/5] ARM: S5P64x0: Add I2S clkdev support   Padmavathi Venna
• [PATCH 4/5] ARM: S5PV210: Avoid passing the clks through platform data   Padmavathi Venna
• [PATCH 5/5] ARM: Exynos: Avoid passing the clks through platform data   Padmavathi Venna
• [PATCH V2] ARM: SAMSUNG: Delete the unnecessary variable   Padmavathi Venna
• [PATCH v2] ASoC: Samsung: Update Kconfig for Exynos5250 and Exynos4412   Padmavathi Venna
• [PATCH] media: davinci: vpif: display: separate out subdev from output   Hans Verkuil
• [PATCH v2] media: davinci: vpif: display: separate out subdev from output   Hans Verkuil
• [PATCH v2] media: davinci: vpif: display: separate out subdev from output   Hans Verkuil
• [PATCH v2] media: davinci: vpif: display: separate out subdev from output   Hans Verkuil
• [PATCH v2] media: davinci: vpif: display: separate out subdev from output   Hans Verkuil
• [PATCH v2] media: davinci: vpif: display: separate out subdev from output   Hans Verkuil
• [PATCH v3] media: davinci: vpif: display: separate out subdev from output   Hans Verkuil
• [PATCH 1/2] dm644x: replace the obsolete preset API by the timings API.   Hans Verkuil
• minicom settings   Vivek Verma
• [PATCH 4/4] ARM: ks8695: convert to generic time and clocksource   Andrew Victor
• [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Rabin Vincent
• [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Rabin Vincent
• [PATCH v3 17/31] arm64: System calls handling   Al Viro
• [PATCH v5 0/14] KGDB/KDB FIQ (NMI) debugger   Anton Vorontsov
• [PATCH 01/14] serial/amba-pl011: fix ages old copy-paste errors   Anton Vorontsov
• [PATCH 02/14] drivers/tty/serial/amba-pl0{10,11}.c: use clk_prepare_enable and clk_disable_unprepare   Anton Vorontsov
• [PATCH 03/14] kernel/debug: Mask KGDB NMI upon entry   Anton Vorontsov
• [PATCH 04/14] kdb: Implement disable_nmi command   Anton Vorontsov
• [PATCH 05/14] kdb: Turn KGDB_KDB=n stubs into static inlines   Anton Vorontsov
• [PATCH 06/14] tty/serial/core: Introduce poll_init callback   Anton Vorontsov
• [PATCH 07/14] tty/serial/amba-pl011: Implement poll_init callback   Anton Vorontsov
• [PATCH 08/14] tty/serial/kgdboc: Add and wire up clear_irqs callback   Anton Vorontsov
• [PATCH 09/14] tty/serial/amba-pl011: Implement clear_irqs callback   Anton Vorontsov
• [PATCH 10/14] tty/serial: Add kgdb_nmi driver   Anton Vorontsov
• [PATCH 11/14] ARM: Move some macros from entry-armv to entry-header   Anton Vorontsov
• [PATCH 12/14] ARM: Add KGDB/KDB FIQ debugger generic code   Anton Vorontsov
• [PATCH 13/14] ARM: VIC: Add a couple of low-level FIQ management helpers   Anton Vorontsov
• [PATCH 14/14] ARM: versatile: Make able to use UART ports for KGDB FIQ debugger   Anton Vorontsov
• [PATCH 10/14] tty/serial: Add kgdb_nmi driver   Anton Vorontsov
• [PATCH 09/14] tty/serial/amba-pl011: Implement clear_irqs callback   Anton Vorontsov
• [PATCH 08/14] tty/serial/kgdboc: Add and wire up clear_irqs callback   Anton Vorontsov
• [PATCH 06/14] tty/serial/core: Introduce poll_init callback   Anton Vorontsov
• [PATCH 08/14] tty/serial/kgdboc: Add and wire up clear_irqs callback   Anton Vorontsov
• [PATCH v6 0/12] KGDB/KDB FIQ (NMI) debugger   Anton Vorontsov
• [PATCH 01/12] kernel/debug: Mask KGDB NMI upon entry   Anton Vorontsov
• [PATCH 02/12] kdb: Implement disable_nmi command   Anton Vorontsov
• [PATCH 03/12] kdb: Turn KGDB_KDB=n stubs into static inlines   Anton Vorontsov
• [PATCH 04/12] tty/serial/core: Introduce poll_init callback   Anton Vorontsov
• [PATCH 05/12] tty/serial/amba-pl011: Implement poll_init callback   Anton Vorontsov
• [PATCH 06/12] tty/serial/kgdboc: Add and wire up clear_irqs callback   Anton Vorontsov
• [PATCH 07/12] tty/serial/amba-pl011: Implement clear_irqs callback   Anton Vorontsov
• [PATCH 08/12] tty/serial: Add kgdb_nmi driver   Anton Vorontsov
• [PATCH 09/12] ARM: Move some macros from entry-armv to entry-header   Anton Vorontsov
• [PATCH 10/12] ARM: Add KGDB/KDB FIQ debugger generic code   Anton Vorontsov
• [PATCH 11/12] ARM: VIC: Add a couple of low-level FIQ management helpers   Anton Vorontsov
• [PATCH 12/12] ARM: versatile: Make able to use UART ports for KGDB FIQ debugger   Anton Vorontsov
• [PATCH 08/12] tty/serial: Add kgdb_nmi driver   Anton Vorontsov
• [RFC] tty/serial/kgdboc: Add and wire up clear_irqs callback   Anton Vorontsov
• [RFC] tty/serial/kgdboc: Add and wire up clear_irqs callback   Anton Vorontsov
• [RFC] tty/serial/kgdboc: Add and wire up clear_irqs callback   Anton Vorontsov
• [RFC] tty/serial/kgdboc: Add and wire up clear_irqs callback   Anton Vorontsov
• [PATCH v7 0/11] KGDB/KDB FIQ (NMI) debugger   Anton Vorontsov
• [PATCH 01/11] kernel/debug: Mask KGDB NMI upon entry   Anton Vorontsov
• [PATCH 02/11] kdb: Implement disable_nmi command   Anton Vorontsov
• [PATCH 03/11] kdb: Turn KGDB_KDB=n stubs into static inlines   Anton Vorontsov
• [PATCH 04/11] tty/serial/core: Introduce poll_init callback   Anton Vorontsov
• [PATCH 05/11] tty/serial/amba-pl011: Implement poll_init callback   Anton Vorontsov
• [PATCH 06/11] tty/serial/amba-pl011: Quiesce interrupts in poll_get_char   Anton Vorontsov
• [PATCH 07/11] tty/serial: Add kgdb_nmi driver   Anton Vorontsov
• [PATCH 08/11] ARM: Move some macros from entry-armv to entry-header   Anton Vorontsov
• [PATCH 09/11] ARM: Add KGDB/KDB FIQ debugger generic code   Anton Vorontsov
• [PATCH 10/11] ARM: VIC: Add a couple of low-level FIQ management helpers   Anton Vorontsov
• [PATCH 11/11] ARM: versatile: Make able to use UART ports for KGDB FIQ debugger   Anton Vorontsov
• [PATCH v7 0/11] KGDB/KDB FIQ (NMI) debugger   Anton Vorontsov
• Implement devicetree support for AB8500 Btemp   Anton Vorontsov
• [PATCH updated 07/11] tty/serial: Add kgdb_nmi driver   Anton Vorontsov
• [PATCH v7 0/11] KGDB/KDB FIQ (NMI) debugger   Anton Vorontsov
• [PATCH 07/11] tty/serial: Add kgdb_nmi driver   Anton Vorontsov
• [PATCH v7 0/11] KGDB/KDB FIQ (NMI) debugger   Anton Vorontsov
• [PATCH v8 0/11] KGDB/KDB FIQ (NMI) debugger   Anton Vorontsov
• [PATCH 01/11] kernel/debug: Mask KGDB NMI upon entry   Anton Vorontsov
• [PATCH 02/11] kdb: Implement disable_nmi command   Anton Vorontsov
• [PATCH 03/11] kdb: Turn KGDB_KDB=n stubs into static inlines   Anton Vorontsov
• [PATCH 04/11] tty/serial/core: Introduce poll_init callback   Anton Vorontsov
• [PATCH 05/11] tty/serial/amba-pl011: Implement poll_init callback   Anton Vorontsov
• [PATCH 06/11] tty/serial/amba-pl011: Quiesce interrupts in poll_get_char   Anton Vorontsov
• [PATCH 07/11] tty/serial: Add kgdb_nmi driver   Anton Vorontsov
• [PATCH 08/11] ARM: Move some macros from entry-armv to entry-header   Anton Vorontsov
• [PATCH 09/11] ARM: Add KGDB/KDB FIQ debugger generic code   Anton Vorontsov
• [PATCH 10/11] ARM: VIC: Add a couple of low-level FIQ management helpers   Anton Vorontsov
• [PATCH 11/11] ARM: versatile: Make able to use UART ports for KGDB FIQ debugger   Anton Vorontsov
• [PATCH updated 07/11] tty/serial: Add kgdb_nmi driver   Anton Vorontsov
• [V4 3/4] power_supply: Enable battery-charger for 88pm860x   Anton Vorontsov
• [V4 3/4] power_supply: Enable battery-charger for 88pm860x   Anton Vorontsov
• [PATCH v8 0/11] KGDB/KDB FIQ (NMI) debugger   Anton Vorontsov
• [PATCH v9 0/11] KGDB/KDB FIQ (NMI) debugger   Anton Vorontsov
• [PATCH 01/11] kernel/debug: Mask KGDB NMI upon entry   Anton Vorontsov
• [PATCH 02/11] kdb: Implement disable_nmi command   Anton Vorontsov
• [PATCH 03/11] kdb: Turn KGDB_KDB=n stubs into static inlines   Anton Vorontsov
• [PATCH 04/11] tty/serial/core: Introduce poll_init callback   Anton Vorontsov
• [PATCH 05/11] tty/serial/amba-pl011: Implement poll_init callback   Anton Vorontsov
• [PATCH 06/11] tty/serial/amba-pl011: Quiesce interrupts in poll_get_char   Anton Vorontsov
• [PATCH 07/11] tty/serial: Add kgdb_nmi driver   Anton Vorontsov
• [PATCH 08/11] ARM: Move some macros from entry-armv to entry-header   Anton Vorontsov
• [PATCH 09/11] ARM: Add KGDB/KDB FIQ debugger generic code   Anton Vorontsov
• [PATCH 10/11] ARM: VIC: Add a couple of low-level FIQ management helpers   Anton Vorontsov
• [PATCH 11/11] ARM: versatile: Make able to use UART ports for KGDB FIQ debugger   Anton Vorontsov
• [PATCH v9 0/11] KGDB/KDB FIQ (NMI) debugger   Anton Vorontsov
• [PATCH 08/11] ARM: Move some macros from entry-armv to entry-header   Anton Vorontsov
• [PATCH 1/8] i2c: at91: use managed resources   Voss, Nikolaus
• [PATCH 2/8] i2c: at91: add warning about transmission issues for some devices   Voss, Nikolaus
• [PATCH 3/8] i2c: at91: use an id table for SoC dependent parameters   Voss, Nikolaus
• [PATCH 4/8] ARM: at91: do not configure at91sam9g10 twi pio as open-drain   Voss, Nikolaus
• [PATCH 5/8] i2c: at91: add dt support to i2c-at91   Voss, Nikolaus
• [PATCH 6/8] ARM: at91: add clocks for I2C DT entries   Voss, Nikolaus
• [PATCH 3/8] i2c: at91: use an id table for SoC dependent parameters   Voss, Nikolaus
• [PATCH v3 0/8] i2c: at91: cleanup and dt support   Voss, Nikolaus
• [Xen-devel] [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   David Vrabel
• [PATCH 0/4] ARM: OMAP: Move plat/dma*.h, omap-secure.h headers as part of single zImage work   Lokesh Vutla
• [PATCH 1/4] ARM: OMAP: DMA: Removing plat/dma-44xx.h   Lokesh Vutla
• [PATCH 2/4] ARM: OMAP: DMA: Move plat/dma hearder to platform_data/dma-omap   Lokesh Vutla
• [PATCH 3/4] ARM: OMAP: Move omap_reserve() locally to mach-omap1/2   Lokesh Vutla
• [PATCH 4/4] ARM: OMAP: Move plat/omap-secure.h locally to mach-omap2   Lokesh Vutla
• [PATCH] ARM: kirkwood: fix LEDs names for lsxl boards   Michael Walle
• [PATCH] ARM: kirkwood: fix buttons on lsxl boards   Michael Walle
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Linus Walleij
• [PATCH 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Linus Walleij
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Linus Walleij
• [PATCH] ARM: ux500: Fix build error due to missing include of asm/pmu.h in cpu-db8500.c   Linus Walleij
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Linus Walleij
• [PATCH v3 2/4] pinctrl: add exynos4210 specific extensions for samsung pinctrl driver   Linus Walleij
• [PATCH v3 4/4] ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used   Linus Walleij
• [PATCH v2 1/2] ARM: dts: Add pinctrl node entries for Samsung Exynos4210 SoC   Linus Walleij
• [PATCH v2 2/2] ARM: EXYNOS: Enable pinctrl driver support for Exynos4 device tree enabled platform   Linus Walleij
• [PATCH 1/3] ARM: PRIMA2: add missing interrupts property for pinctrl node   Linus Walleij
• [PATCH 2/3] ARM: PRIMA2: rename prima2-cb.dts to prima2.dtsi as it only has SoC features   Linus Walleij
• [PATCH 3/3] pinctrl: sirf: add DT-binding pinmux mapping support   Linus Walleij
• [GIT PULL] SPEAr pinctrl updates for v-3.5   Linus Walleij
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH 4/4] ARM: ks8695: convert to generic time and clocksource   Linus Walleij
• [PATCH] ARM: ux500: Provide SMSC911x fixed-regulator when not booting DT   Linus Walleij
• [PATCH] ARM: ux500: Correct Ux500 family names usage   Linus Walleij
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH] ARM: ux500: Fix build error due to missing include of asm/pmu.h in cpu-db8500.c   Linus Walleij
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH 4/4 v3] ARM: ks8695: convert to generic time and clocksource   Linus Walleij
• [PATCH 2/6 v2] ARM: integrator: check PL010 device name rather than base address   Linus Walleij
• [PATCH 2/6 v2] ARM: integrator: check PL010 device name rather than base address   Linus Walleij
• [PATCH 2/6 v3] ARM: integrator: check PL010 base address from resource   Linus Walleij
• [PATCH 3/6 v3] ARM: plat-versatile: add DT support to FPGA IRQ controller   Linus Walleij
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Linus Walleij
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Linus Walleij
• [PATCH 4/4 v3] ARM: ks8695: convert to generic time and clocksource   Linus Walleij
• [PATCH 4/4 v4] ARM: ks8695: convert to generic time and clocksource   Linus Walleij
• [GIT PULL] SPEAr pinctrl updates for v-3.5   Linus Walleij
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Linus Walleij
• [PATCH] gpio: samsung: Update documentation   Linus Walleij
• [PATCH 1/3] gpio-twl4030: get platform data from device tree   Linus Walleij
• [PATCH 2/3] gpio-twl4030: new dt properties for BeagleBoard and omap3-EVM   Linus Walleij
• [PATCH 3/3] gpio-twl4030: updates the bindings for new dt properties   Linus Walleij
• [PATCH] ARM: ux500: Provide SMSC911x fixed-regulator when not booting DT   Linus Walleij
• [PATCH] ARM: ux500: Provide SMSC911x fixed-regulator when not booting DT   Linus Walleij
• [PATCH 4/4 v4] ARM: ks8695: convert to generic time and clocksource   Linus Walleij
• [GIT PULL] ux500 core updates   Linus Walleij
• [PATCH 06/11] clk: Common clocks implementation for Versatile Express   Linus Walleij
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH 4/4 v5] ARM: ks8695: convert to generic time and clocksource   Linus Walleij
• [PATCH] ARM: gemini: fix the gemini build   Linus Walleij
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Linus Walleij
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [GIT PULL] ks8695 timer changes for v3.7   Linus Walleij
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Linus Walleij
• [PATCH 02/17] arm: ux500: add ccu9540 board support   Linus Walleij
• [st-ericsson] [PATCH 15/17] mfd: dbx540-prcmu creation   Linus Walleij
• [st-ericsson] [PATCH 02/17] arm: ux500: add ccu9540 board support   Linus Walleij
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Linus Walleij
• [PATCH 5/6 v3] ARM: integrator: convert AMBA devices to device tree   Linus Walleij
• [PATCH 6/6 v2] ARM: integrator: convert platform devices to Device Tree   Linus Walleij
• [GIT PULL] Renesas ARM-based SoC: KZM-A9-GT for 3.7 #2   Linus Walleij
• [GIT PULL] Renesas ARM-based SoC: KZM-A9-GT for 3.7 #2   Linus Walleij
• [PATCH 1/8] gpio: 74x164: Use module_spi_driver boiler plate function   Linus Walleij
• [PATCH 2/8] gpio: 74x164: Use devm_kzalloc   Linus Walleij
• [PATCH 4/8] gpio: 74x164: Add device tree support   Linus Walleij
• [GIT PULL] Renesas ARM-based SoC: KZM-A9-GT for 3.7 #2   Linus Walleij
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Linus Walleij
• [PATCH 1/2] serial: pl011: delete dangling bug flag   Linus Walleij
• [PATCH 2/2] serial: pl011: delete reset callback   Linus Walleij
• [PATCH V2 0/4] clk: Convert ARM ux500 to common clock   Linus Walleij
• [PATCH 2/5] arm/dts: Add pinctrl driver entries for omap2/3/4   Linus Walleij
• [PATCH 1/4] clk: Provide option for clk_get_rate to issue hw for new rate   Linus Walleij
• [PATCH 2/8] gpio: 74x164: Use devm_kzalloc   Linus Walleij
• [PATCH 3/7] gpio: 74x164: Use dynamic gpio number assignment if no pdata is present   Linus Walleij
• [PATCH 4/7] gpio: 74x164: Add device tree support   Linus Walleij
• [PATCH 5/7] gpio: 74x164: Add support for the daisy-chaining   Linus Walleij
• [PATCH 5/7] gpio: 74x164: Add support for the daisy-chaining   Linus Walleij
• [PATCH 1/8] gpio: 74x164: Use module_spi_driver boiler plate function   Linus Walleij
• [PATCH v2 0/6] Make mach/gpio.h optional   Linus Walleij
• [PATCH 1/4] clk: Provide option for clk_get_rate to issue hw for new rate   Linus Walleij
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Linus Walleij
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Linus Walleij
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Linus Walleij
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Linus Walleij
• [PATCH 1/4] ARM: ks-8695: merge the timer header into the timer driver   Linus Walleij
• [PATCH] ARM: mark kernelmode mem{cpy,set} non-experimental   Linus Walleij
• [PATCH] pinctrl/nomadik : add MC1_a_2 pin MC1 function group list   Linus Walleij
• [PATCH 00/19] First HREF Device Tree enablement patch-set   Linus Walleij
• [PATCH 01/19] ARM: ux500: Add skeleton Device Tree for the HREF reference board   Linus Walleij
• [PATCH 02/19] ARM: ux500: Add UART support to the HREF Device Tree   Linus Walleij
• [PATCH 03/19] ARM: ux500: Pass SDI DMA information though AUX_DATA to MMCI   Linus Walleij
• [PATCH 04/19] ARM: ux500: Add SDI (MMC) support to the HREF Device Tree   Linus Walleij
• [PATCH 06/19] ARM: ux500: Add nodes for the MSP into the HREF Device Tree   Linus Walleij
• [PATCH 07/19] ARM: ux500: Add all encompassing sound node to the HREF Device Tree   Linus Walleij
• [PATCH 08/19] ARM: ux500: Stop registering Audio devices for HREF when DT is enabled   Linus Walleij
• [PATCH 09/19] ARM: ux500: Enable SSP (SPI) for HREF when booting Device Tree   Linus Walleij
• [PATCH 10/19] ARM: ux500: Remove redundant #gpio-cell properties from HREF and Snowball DT   Linus Walleij
• [PATCH 00/19] First HREF Device Tree enablement patch-set   Linus Walleij
• [PATCH 11/19] ARM: ux500: Add all known I2C sub-device nodes to the HREF DT   Linus Walleij
• [PATCH 12/19] i2c-nomadik: Register sub-devices when passed via Device Tree   Linus Walleij
• [PATCH 13/19] ARM: ux500: Stop registering I2C sub-devices for HREF when DT is enabled   Linus Walleij
• [PATCH 14/19] ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT   Linus Walleij
• [PATCH 16/19] mfd: Provide the tc3589x with its own IRQ domain   Linus Walleij
• [PATCH 17/19] mfd: Enable the tc3589x for Device Tree   Linus Walleij
• [PATCH 18/19] gpio: Provide the tc3589x GPIO expander driver with an IRQ domain   Linus Walleij
• [PATCH 19/19] gpio: Enable the tc3298x GPIO expander driver for Device Tree   Linus Walleij
• mfd: Implement devicetree support for AB8500 Btemp   Linus Walleij
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Linus Walleij
• linux-next: manual merge of the clk tree with the arm-soc tree   Linus Walleij
• [PATCH v3 1/9] pinctrl: mvebu: pinctrl driver core   Linus Walleij
• [PATCH v3 2/9] pinctrl: mvebu: dove pinctrl driver   Linus Walleij
• [PATCH v3 3/9] pinctrl: mvebu: kirkwood pinctrl driver   Linus Walleij
• [PATCH v3 4/9] pinctrl: mvebu: add pinctrl driver for Armada 370   Linus Walleij
• [PATCH v3 5/9] pinctrl: mvebu: add pinctrl driver for Armada XP   Linus Walleij
• [PATCH v3 0/9] pinctrl: mvebu: pinctrl driver   Linus Walleij
• [PATCH] pinctrl/nomadik : add MC1_a_2 pin MC1 function group list   Linus Walleij
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Linus Walleij
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Linus Walleij
• [PATCH 1/2] i2c: s3c2410: add optional pin configuration using pinctrl interface   Linus Walleij
• [PATCH 1/2] i2c: s3c2410: add optional pin configuration using pinctrl interface   Linus Walleij
• [PATCH] watchdog: ks8695: sink registers into driver   Linus Walleij
• [PATCH 12/16] ARM: nomadik: move platform_data definitions   Linus Walleij
• [PATCH 5/7] gpio: 74x164: Add support for the daisy-chaining   Linus Walleij
• [PATCH 1/3] gpio: 74x164: Add support for the daisy-chaining   Linus Walleij
• [PATCH 2/3] gpio: 74x164: dts: Add documentation for the dt binding   Linus Walleij
• [GIT PULL] GPIO: KZM-A9-GT for 3.7   Linus Walleij
• [PATCH] ARM: shmobile: kzm9g: use gpio-keys instead of gpio-keys-polled   Linus Walleij
• [PATCH] watchdog: ks8695: sink registers into driver   Linus Walleij
• [PATCH 1/2] pinctrl: mvebu: mark internal functions as static   Linus Walleij
• [PATCH 2/2] pinctrl: mvebu: remove dead code   Linus Walleij
• [PATCH 05/11] clk: Versatile Express clock generators ("osc") driver   Linus Walleij
• [PATCH 1/3] gpio: 74x164: Add support for the daisy-chaining   Linus Walleij
• [PATCH 2/3] gpio: 74x164: dts: Add documentation for the dt binding   Linus Walleij
• [PATCH v3 1/9] pinctrl: mvebu: pinctrl driver core   Linus Walleij
• [PATCH 18/19] gpio: Provide the tc3589x GPIO expander driver with an IRQ domain   Linus Walleij
• [PATCH] ARM: shmobile: kzm9g: use gpio-keys instead of gpio-keys-polled   Linus Walleij
• [PATCH v3 1/9] pinctrl: mvebu: pinctrl driver core   Linus Walleij
• [PATCH] ARM: smp_twd: reprogram twd based on clk notifier   Linus Walleij
• [PATCH] ARM: smp_twd: reprogram twd based on clk notifier   Linus Walleij
• [PATCH v3 1/9] pinctrl: mvebu: pinctrl driver core   Linus Walleij
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Linus Walleij
• [PATCH v2 6/6] ARM: make mach/gpio.h headers optional   Linus Walleij
• [PATCH 18/19] gpio: Provide the tc3589x GPIO expander driver with an IRQ domain   Linus Walleij
• [PATCH 19/19] gpio: Enable the tc3298x GPIO expander driver for Device Tree   Linus Walleij
• [PATCH] pinctrl: document semantics vs GPIO   Linus Walleij
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Linus Walleij
• [PATCH v2] ARM: smp_twd: reprogram twd based on clk notifier   Linus Walleij
• [PATCH] staging: ste_rmi4: remove gpio.h include   Linus Walleij
• [PATCH] ARM: ux500: 8500: use hsit_a_2 group for HSI   Linus Walleij
• [PATCH v3 1/5] gpio: introduce gpio-mvebu driver for Marvell SoCs   Linus Walleij
• [PATCH v3 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Linus Walleij
• [PATCH] RFC: ARM: nomadik/ux500: convert to SPARSE_IRQ   Linus Walleij
• [PATCH] pinctrl: document semantics vs GPIO   Linus Walleij
• [PATCH] pinctrl: document semantics vs GPIO   Linus Walleij
• [PATCH v2] pinctrl: document semantics vs GPIO   Linus Walleij
• [PATCH] pinctrl: use kasprintf() in pinmux_request_gpio()   Linus Walleij
• [PATCH 10/19] ARM: ux500: Remove redundant #gpio-cell properties from HREF and Snowball DT   Linus Walleij
• [PATCH 06/19] ARM: ux500: Add nodes for the MSP into the HREF Device Tree   Linus Walleij
• [PATCH 01/19] ARM: ux500: Add skeleton Device Tree for the HREF reference board   Linus Walleij
• triggering an gpio-irq on both edges   Linus Walleij
• [PATCH 3/8] pl080.h: moved from arm/include/asm/hardware to include/linux/amba/   Linus Walleij
• [PATCH 1/8] DMA: PL330: use prefix in reg names to build under x86   Linus Walleij
• [PATCH 06/24] ARM: integrator: use __iomem pointers for MMIO   Linus Walleij
• [PATCH 13/24] ARM: nomadik: use __iomem pointers for MMIO   Linus Walleij
• [PATCH 06/24] ARM: integrator: use __iomem pointers for MMIO   Linus Walleij
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Linus Walleij
• [PATCH v2] pinctrl: document semantics vs GPIO   Linus Walleij
• [PATCH v2 04/15] dmaengine: Pass no_wakeup parameter via device_prep_dma_cyclic() callback   Linus Walleij
• [PATCH] spi: pl022: Add clk_{un}prepare() support in runtime PM   Linus Walleij
• [PATCH] RFC: ARM: nomadik/ux500: convert to SPARSE_IRQ   Linus Walleij
• [PATCH] ARM: ux500: fix spi2 pin group   Linus Walleij
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Linus Walleij
• [PATCH] ARM: ux500: tidy up pin sleep modes   Linus Walleij
• [PATCH] spi: pl022: Add clk_{un}prepare() support in runtime PM   Linus Walleij
• [PATCH] spi/pl022: Devicetree support w/o platform data   Linus Walleij
• [PATCH 09/19] ARM: ux500: Enable SSP (SPI) for HREF when booting Device Tree   Linus Walleij
• [PATCH v2 2/2] ARM: OMAP2+: Enable pinctrl dummy states   Linus Walleij
• [PATCH v2 04/15] dmaengine: Pass no_wakeup parameter via device_prep_dma_cyclic() callback   Linus Walleij
• [PATCH 1/2] ARM: LPC32xx: DTS update for devicetree completion of spi-pl022   Linus Walleij
• [PATCH v2] spi/pl022: Devicetree support w/o platform data   Linus Walleij
• [PATCH 1/1] ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT   Linus Walleij
• [PATCH 1/1] ARM: ux500: Fix SSP register address format   Linus Walleij
• [PATCH] spi: pl022: Add clk_{un}prepare() support in runtime PM   Linus Walleij
• [PATCH 4/5] gpio: Make gpio-msm-v1 into a platform driver   Linus Walleij
• [PATCH 11/19] ARM: ux500: Add all known I2C sub-device nodes to the HREF DT   Linus Walleij
• linux-next: manual merge of the arm-soc tree with the arm tree   Linus Walleij
• [PATCH 00/11] pinctrl: mvebu: pinctrl driver   Linus Walleij
• [PATCH 1/3] serial: pl011: safeguard against impossible baudrates   Linus Walleij
• [PATCH 2/3] serial: pl011: handle corruption at high clock speeds   Linus Walleij
• [PATCH 3/3] serial: pl011: allow very high baudrates   Linus Walleij
• [PATCH 0/6] pinctrl: samsung: Various fixes   Linus Walleij
• [RFC 0/6] pinctrl: samsung: Remove static platform-specific data   Linus Walleij
• [PATCH] ARM: nomadik/ux500: convert to SPARSE_IRQ   Linus Walleij
• [PATCH] i2c-nomadik: Fixup clock handling   Linus Walleij
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Linus Walleij
• [PATCH 1/3] serial: pl011: safeguard against impossible baudrates   Linus Walleij
• [PATCH 3/3] serial: pl011: allow very high baudrates   Linus Walleij
• [PATCH] serial: pl011: handle corruption at high clock speeds   Linus Walleij
• [PATCH 3/3] serial: pl011: allow very high baudrates   Linus Walleij
• [PATCH] RFC: serial: pl011: allow very high baudrates   Linus Walleij
• [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver   Linus Walleij
• [RFC PATCH 0/6] pinctrl: samsung: Convert the driver to use per-bank GPIO and interrupt specifiers   Linus Walleij
• [PATCH] gpio-lpc32xx: Fix value handling of gpio_direction_output()   Linus Walleij
• [PATCH 7/6] pinctrl: exynos: Fix wakeup IRQ domain registration check   Linus Walleij
• [RFC PATCH 0/6] pinctrl: samsung: Convert the driver to use per-bank GPIO and interrupt specifiers   Linus Walleij
• [PATCH] rtc: kconfig: Fixup dependency for ab8500   Linus Walleij
• [PATCH v2] GPIO: Add support for GPIO on CLPS711X-target platform   Linus Walleij
• [PATCH 1/1] mfd: Provide the PRCMU with its own IRQ domain   Linus Walleij
• [RESEND PATCH] rtc: kconfig: Fixup dependency for ab8500   Linus Walleij
• [PATCH] ARM: ux500: 8500: update I2C sleep states pinctrl   Linus Walleij
• [PATCH 3/3] serial: pl011: allow very high baudrates   Linus Walleij
• [PATCH] ARM: GIC: dont warn on pre-allocated IRQ descs   Linus Walleij
• [PATCH] ARM: ux500: Move regulator-name properties out to board DTS files   Linus Walleij
• [PATCH] ARM: GIC: dont warn on pre-allocated IRQ descs   Linus Walleij
• [PATCH RESEND] gpio-lpc32xx: Fix value handling of gpio_direction_output()   Linus Walleij
• [PATCH] RFC: serial: pl011: allow very high baudrates   Linus Walleij
• [PATCH 3/3] serial: pl011: allow very high baudrates   Linus Walleij
• [PATCH v2] serial: pl011: handle corruption at high clock speeds   Linus Walleij
• [PATCH v1 01/12] clk: davinci - add Main PLL clock driver   Linus Walleij
• [PATCH] ARM: ux500: Fix initialisation order for UIBs   Linus Walleij
• [PATCH 1/2] spi:pl022: Disable/Enable functional clock from suspend/resume   Linus Walleij
• [PATCH 2/2] ARM: ABMA: Disable/Enable interface clock from suspend/resume   Linus Walleij
• [PATCH 1/2] spi:pl022: Disable/Enable functional clock from suspend/resume   Linus Walleij
• [PATCH] pinctrl: clarify idle vs sleep states   Linus Walleij
• [PATCH 1/2] spi:pl022: Disable/Enable functional clock from suspend/resume   Linus Walleij
• [PATCH v3] serial: pl011: handle corruption at high clock speeds   Linus Walleij
• [PATCH] pinctrl/nomadik: allocate IRQ descriptors dynamically   Linus Walleij
• [PATCH 2/2] gpio: samsung: Fix input mode setting function for GPIO int   Linus Walleij
• [PATCH] pinctrl/nomadik: allocate IRQ descriptors dynamically   Linus Walleij
• [PATCH] pinctrl/nomadik: allocate IRQ descriptors dynamically   Linus Walleij
• [PATCH 1/4] pinctrl/nomadik: use irq_find_mapping()   Linus Walleij
• [PATCH 2/4] irqdomain: augment add_simple() to allocate descs   Linus Walleij
• [PATCH 3/4] pinctrl/nomadik: use simple or linear IRQ domain   Linus Walleij
• [PATCH 4/4] ARM: nomadik/ux500: convert to SPARSE_IRQ   Linus Walleij
• [PATCH 01/13] clk: davinci - add Main PLL clock driver   Linus Walleij
• [PATCH v2] pinctrl: clarify idle vs sleep states   Linus Walleij
• [PATCH 0/6] pinctrl: sirf: a bundle of fix, cleanup and upgrade   Linus Walleij
• [PATCH 1/6] pinctrl: sirf: fix a typo in sirfsoc_gpio_probe   Linus Walleij
• [PATCH 2/6] pinctrl: sirf: add missing pins to pinctrl list   Linus Walleij
• [PATCH 4/6] pinctrl: sirf: initialize the irq_chip pointer of pinctrl_gpio_range   Linus Walleij
• [PATCH 5/6] pinctrl: sirf: add lost chained_irq_enter and exit in sirfsoc_gpio_handle_irq   Linus Walleij
• [PATCH 6/6] pinctrl: sirf: enable the driver support new SiRFmarco SoC   Linus Walleij
• [PATCH 1/2] pinctrl: add bcm2835 driver   Linus Walleij
• [PATCH 2/2] ARM: bcm2835: enable GPIO/pinctrl   Linus Walleij
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Linus Walleij
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Linus Walleij
• [PATCH 1/2] gpio-lpc32xx: Add GPI_28   Linus Walleij
• [PATCH 2/2] gpio: Document device_node's det_debounce   Linus Walleij
• [PATCH 2/3] clk: ux500: Support prcmu ape opp voltage clock   Linus Walleij
• [PATCH 1/3] Revert "spi/pl022: fix spi-pl022 pm enable at probe"   Linus Walleij
• [PATCH 10/12] gpio: pcf857x: select IRQ_DOMAIN   Linus Walleij
• [PATCH 1/3] Revert "spi/pl022: fix spi-pl022 pm enable at probe"   Linus Walleij
• [PATCH 2/3] Revert "spi/pl022: enable runtime PM"   Linus Walleij
• [PATCH 3/3] spi: spi-pl022: Minor simplification for runtime pm   Linus Walleij
• [PATCH] ARM: OMAP: remove unused hwmod function prototypes   Paul Walmsley
• OMAP baseline test results for v3.6-rc4   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: PRCM/hwmod: some fixes for 3.6-rc   Paul Walmsley
• [PATCH] ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write   Paul Walmsley
• [PATCH v4 00/21] OMAP UART Patches   Paul Walmsley
• [PATCH v6 10/10] ARM: OMAP2+: tusb6010: generic timing calculation   Paul Walmsley
• [PATCH 0/6] ARM: OMAP2+: clean up the Makefile   Paul Walmsley
• [PATCH 1/6] ARM: OMAP2+: clean up whitespace in Makefile   Paul Walmsley
• [PATCH 2/6] ARM: OMAP2+: clean up omap_hwmod.o build directives in Makefile   Paul Walmsley
• [PATCH 3/6] ARM: OMAP2+: move MPU INTCPS, secure monitor, SDRC build directives in Makefile   Paul Walmsley
• [PATCH 4/6] ARM: OMAP2+: clean up OMAP4 PRM & sleep build directives in Makefile   Paul Walmsley
• [PATCH 5/6] ARM: OMAP2+: clean up OMAP clock Makefile sections   Paul Walmsley
• [PATCH 6/6] ARM: OMAP2+: clean up PRCM sections of the Makefile   Paul Walmsley
• OMAP baseline test results for v3.6-rc5   Paul Walmsley
• OMAP baseline test results for v3.6-rc5   Paul Walmsley
• OMAP baseline test results for v3.6-rc5   Paul Walmsley
• [PATCH 00/29] Move OMAP2+ over to use COMMON clock   Paul Walmsley
• [PATCH] ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write   Paul Walmsley
• [PATCH] ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write   Paul Walmsley
• [PATCH 00/29] Move OMAP2+ over to use COMMON clock   Paul Walmsley
• [PATCH v4 00/21] OMAP UART Patches   Paul Walmsley
• [PATCH v2] arm: omap: hwmod: make *phy_48m* as the main_clk of ocp2scp   Paul Walmsley
• [PATCH 00/29] Move OMAP2+ over to use COMMON clock   Paul Walmsley
• [PATCH] SPI: OMAP: remove unnecessary includes of plat/clock.h   Paul Walmsley
• Ack possibility for '[PATCH] SPI: OMAP: remove unnecessary includes of plat/clock.h' ?   Paul Walmsley
• Ack possibility for '[PATCH] SPI: OMAP: remove unnecessary includes of plat/clock.h' ?   Paul Walmsley
• [PATCH] CPUFreq: OMAP: remove unnecessary plat/ includes   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: some Makefile cleanup for 3.7   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: clean up smatch warnings and unwrap strings, for 3.7   Paul Walmsley
• [PATCH] ARM: OMAP2+: dpll: Add missing soc_is_am33xx() check for common functions   Paul Walmsley
• [GIT PULL] ARM: AM33xx: hwmod/clock: add hwmod data and some clock/hwmod fixes for 3.7   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: PRCM/hwmod: some fixes for 3.6-rc   Paul Walmsley
• [PATCH v9 3/3] ARM: OMAP2+: gpmc: minimal driver support   Paul Walmsley
• [GIT PULL] ARM: AM33xx: hwmod/clock: add hwmod data and some clock/hwmod fixes for 3.7   Paul Walmsley
• [PATCHv7 03/12] ARM: OMAP4: hwmod: flag hwmods/modules not supporting module level context status   Paul Walmsley
• [PATCHv7 04/12] ARM: OMAP: hwmod: Add support for per hwmod/module context lost count   Paul Walmsley
• [PATCHv7 05/12] ARM: OMAP4: pwrdm: add support for reading prev logic and mem states   Paul Walmsley
• [PATCHv7 10/12] ARM: OMAP4: HWMOD: add support for lostcontext_mask   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: PRCM/hwmod: some fixes for 3.6-rc   Paul Walmsley
• [PATCH v4 00/21] OMAP UART Patches   Paul Walmsley
• [PATCHv7 04/12] ARM: OMAP: hwmod: Add support for per hwmod/module context lost count   Paul Walmsley
• [PATCH v9 1/3] ARM: OMAP2/3: hwmod data: add gpmc   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• [PATCH 2/2] ARM: AM33XX: hwmod: Add OMAP_INTC_START offset to all module int nos   Paul Walmsley
• [GIT PULL v2] ARM: AM33xx: hwmod/clock: add hwmod data and some clock/hwmod fixes for 3.7   Paul Walmsley
• [PATCH v2] arm: omap: hwmod: make *phy_48m* as the main_clk of ocp2scp   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• [PATCH v2] arm: omap: hwmod: make *phy_48m* as the main_clk of ocp2scp   Paul Walmsley
• [PATCH 00/29] Move OMAP2+ over to use COMMON clock   Paul Walmsley
• [PATCH 00/29] Move OMAP2+ over to use COMMON clock   Paul Walmsley
• [PATCH v4 00/21] OMAP UART Patches   Paul Walmsley
• [PATCH 00/29] Move OMAP2+ over to use COMMON clock   Paul Walmsley
• [PATCH] mfd: Fix compile for twl-core.c by removing cpu_is_omap usage   Paul Walmsley
• [PATCH 00/29] Move OMAP2+ over to use COMMON clock   Paul Walmsley
• [PATCH] mfd: Fix compile for twl-core.c by removing cpu_is_omap usage   Paul Walmsley
• OMAP baseline test results for v3.6-rc6   Paul Walmsley
• [PATCH 0/3] ARM: OMAP2+: hwmod: resolve some OMAP4 warnings   Paul Walmsley
• [PATCH 1/3] ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks   Paul Walmsley
• [PATCH 2/3] ARM: OMAP4+: hwmod code: remove clkdm requirement in _omap4_wait_target_*()   Paul Walmsley
• [PATCH 3/3] ARM: OMAP2+: hwmod code: convert missing clockdomain warnings to debug messages   Paul Walmsley
• [PATCHv4 8/8] ARM: OMAP3: do not delete per_clkdm autodeps during idle   Paul Walmsley
• [PATCHv4 8/8] ARM: OMAP3: do not delete per_clkdm autodeps during idle   Paul Walmsley
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Paul Walmsley
• [PATCH 1/5] ARM: OMAP2/3: hwmod: add RNG integration data   Paul Walmsley
• [PATCH 1/5] ARM: OMAP2/3: hwmod: add RNG integration data   Paul Walmsley
• [PATCH V3 1/8] ARM: OMAP3: Add debugss HWMOD data   Paul Walmsley
• [PATCH v2 3/9] ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Paul Walmsley
• [PATCH v2 1/9] ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected   Paul Walmsley
• [PATCH RESEND 3/5] ARM: OMAP2+: AM33XX: Add clock entries to omap_clk data   Paul Walmsley
• [PATCH RESEND 0/5] ARM: dts: AM33XX: Add device tree data   Paul Walmsley
• [PATCH v2 3/9] ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Paul Walmsley
• [PATCH v2 2/9] ARM: OMAP3: hwmod data: add mmu data for iva and isp   Paul Walmsley
• [PATCH] CPUFreq: OMAP: remove unnecessary plat/ includes   Paul Walmsley
• [PATCH] ARM: OMAP2+: clock data: add some aliases for use by CPUFreq only (was Re: [PATCH] CPUFreq: OMAP: remove unnecessary plat/ includes)   Paul Walmsley
• [PATCH 3/3] ARM: OMAP2+: hwmod code: convert missing clockdomain warnings to debug messages   Paul Walmsley
• [PATCH V2 3/7] ARM: OMAP4: Add timer clock aliases for device-tree   Paul Walmsley
• [PATCH V2 4/7] ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• [PATCH V3 6/8] ARM: OMAP4: Route PMU IRQs to CTI IRQs   Paul Walmsley
• [PATCH V3 3/8] ARM: OMAP4: Re-map the CTIs IRQs from MPU to DEBUGSS   Paul Walmsley
• [PATCH V3 1/8] ARM: OMAP3: Add debugss HWMOD data   Paul Walmsley
• [PATCH V3 4/8] ARM: OMAP4430: Create PMU device via HWMOD   Paul Walmsley
• [PATCH V3 8/8] ARM: OMAP2+: PMU: Add QoS constraint   Paul Walmsley
• [PATCH V3 0/8] ARM: OMAP4: Add PMU Support   Paul Walmsley
• [PATCH V3 0/8] ARM: OMAP4: Add PMU Support   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• [PATCH v2 2/9] ARM: OMAP3: hwmod data: add mmu data for iva and isp   Paul Walmsley
• [PATCHv7 04/12] ARM: OMAP: hwmod: Add support for per hwmod/module context lost count   Paul Walmsley
• [PATCH 1/2] ARM: OMAP: hwmod: partially un-reset hwmods might not be properly enabled   Paul Walmsley
• [PATCH 2/2] ARM: OMAP: hwmod: revise deassert sequence   Paul Walmsley
• [GIT PULL] ARM: OMAP: hwmod/PMU/PRCM patches for 3.7   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: clock patches for 3.7   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• [GIT PULL] ARM: OMAP: hwmod/PMU/PRCM patches for 3.7   Paul Walmsley
• [GIT PULL] ARM: OMAP: hwmod/PMU/PRCM patches for 3.7   Paul Walmsley
• [PATCH] ARM: OMAP4+: wakeupgen: fix memory corruption   Paul Walmsley
• [GIT PULL] ARM: OMAP: hwmod/PMU/PRCM patches for 3.7   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: PRCM/runtime PM patches for 3.7   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• OMAP baseline test results for v3.6-rc4   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• [GIT PULL] ARM: OMAP: hwmod/PMU/PRCM patches for 3.7   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: PRCM/runtime PM patches for 3.7   Paul Walmsley
• [GIT PULL] ARM: OMAP: hwmod/PMU/PRCM patches for 3.7   Paul Walmsley
• [PATCH] ARM: am33xx: clk: Update clkdev table to add mcasp alias   Paul Walmsley
• OMAP baseline test results for v3.6-rc7   Paul Walmsley
• [GIT PULL] ARM: OMAP: hwmod/PMU/PRCM patches for 3.7   Paul Walmsley
• [PATCH] ARM: am33xx: clk: Update clkdev table to add mcasp alias   Paul Walmsley
• [PATCH] ARM: OMAP2+: Fix PMU interrupt definitions   Paul Walmsley
• rcu self-detected stall messages on OMAP3, 4 boards   Paul Walmsley
• ARM: OMAP: fix new sparse warnings   Paul Walmsley
• [PATCH v6 0/7] ARM: OMAP2+: PM: introduce the power domains functional states   Paul Walmsley
• [PATCH 0/6] ARM: OMAP: remove clock files in arch/arm/plat-omap   Paul Walmsley
• [PATCH 1/6] OMAPDSS: remove unnecessary plat/clock.h includes   Paul Walmsley
• [PATCH 2/6] staging: tidspbridge: remove unnecessary include of <plat/clock.h>   Paul Walmsley
• [PATCH 3/6] cpufreq: OMAP: remove unnecessary include of plat/clock.h   Paul Walmsley
• [PATCH 4/6] ARM: OMAP: duplicate plat-omap/clock.c into mach-omap[12]/clock.c   Paul Walmsley
• [PATCH 5/6] ARM: OMAP: remove plat/clock.h   Paul Walmsley
• [PATCH 6/6] ARM: OMAP: clock: split plat/clkdev_omap.h into OMAP1/2 files   Paul Walmsley
• [PATCH 1/6] OMAPDSS: remove unnecessary plat/clock.h includes   Paul Walmsley
• [PATCH v2 0/7] uio_pruss cleanup and platform support   Paul Walmsley
• [PATCH 5/5] of: Modify c_can binding documentation   Stephen Warren
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Stephen Warren
• [PATCH v2] usb: move phy driver from mach-tegra to drivers/usb   Stephen Warren
• [PATCH] ARM: tegra: remove tegra_timer from tegra_list_clks   Stephen Warren
• [PATCH] MAINTAINERS: tegra: remove Olof/Colin, add device tree files   Stephen Warren
• [PATCH] ARM: enable SUSPEND/ARCH_SUSPEND_POSSIBLE for ARCH_TEGRA   Stephen Warren
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Stephen Warren
• [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Stephen Warren
• [PATCH 1/2] ARM: tegra: fix return value for debugfs init   Stephen Warren
• [PATCH] ARM: enable SUSPEND/ARCH_SUSPEND_POSSIBLE for ARCH_TEGRA   Stephen Warren
• [PATCH] MAINTAINERS: tegra: remove Olof/Colin, add device tree files   Stephen Warren
• [PATCH v3 1/3] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Stephen Warren
• [PATCH V2] ARM: dt: tegra: harmony: add regulators   Stephen Warren
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Stephen Warren
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Stephen Warren
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Stephen Warren
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Stephen Warren
• [PATCH] ARM: tegra: Fix data type for io address   Stephen Warren
• [PATCH V2] ARM: dt: tegra: harmony: add regulators   Stephen Warren
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Stephen Warren
• [PATCH v3 08/10] of/address: Handle #address-cells > 2 specially   Stephen Warren
• [PATCH v3 1/3] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH V2] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH V2] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Stephen Warren
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   Stephen Warren
• [PATCH v3 1/3] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Stephen Warren
• [PATCH] pinctrl/nomadik : add MC1_a_2 pin MC1 function group list   Stephen Warren
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Stephen Warren
• Another tree for "next"   Stephen Warren
• [PATCH 1/2] i2c: s3c2410: add optional pin configuration using pinctrl interface   Stephen Warren
• [PATCH 2/2] ARM: dts: exynos4: allow i2c0 bus to be configured using pinctrl interface   Stephen Warren
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Stephen Warren
• [PATCH 1/2] ARM: tegra: fix overflow in tegra20_pll_clk_round_rate()   Stephen Warren
• [PATCH 2/2] ARM: tegra: cpu-tegra: explicitly manage re-parenting   Stephen Warren
• [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot   Stephen Warren
• [PATCH 2/2] ARM: tegra: cpu-tegra: explicitly manage re-parenting   Stephen Warren
• [PATCH v3 1/3] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Stephen Warren
• [RFC v5] V4L DT bindings   Stephen Warren
• [PATCH 09/16] ARM: tegra: move platform_data definitions   Stephen Warren
• [PATCH 1/2] ARM: tegra: fix overflow in tegra20_pll_clk_round_rate()   Stephen Warren
• [PATCH V2] ARM: tegra: remove useless includes of <mach/*.h>   Stephen Warren
• [PATCH 1/2] ARM: tegra: remove dead code   Stephen Warren
• [PATCH V2] ARM: tegra: remove useless includes of <mach/*.h>   Stephen Warren
• [PATCH] ARM: tegra: delete unused headers   Stephen Warren
• [PATCH] ARM: tegra: delete unused headers   Stephen Warren
• [PATCH 1/2] ARM: dt: tegra: harmony: configure power off   Stephen Warren
• [PATCH 2/2] ARM: dt: tegra: configure power off for some boards   Stephen Warren
• [PATCH] ARM: tegra: config: enable RTC for Cardhu and Whistler   Stephen Warren
• [PATCH v2] ARM: move all dtb targets out of Makefile.boot   Stephen Warren
• [PATCH] ARM: dt: tegra: whistler: configure power off   Stephen Warren
• [PATCH 1/2] ARM: dt: tegra: harmony: configure power off   Stephen Warren
• [PATCH 2/2] ARM: dt: tegra: configure power off for some boards   Stephen Warren
• [PATCH] ARM: tegra: config: enable RTC for Cardhu and Whistler   Stephen Warren
• [PATCH v3 1/9] pinctrl: mvebu: pinctrl driver core   Stephen Warren
• [PATCH v3 2/9] pinctrl: mvebu: dove pinctrl driver   Stephen Warren
• [PATCH v3 6/9] ARM: mvebu: add pinctrl device in DT for Armada 370/XP SoCs   Stephen Warren
• [PATCH V3 1/5] ARM: add infra-structure for BCM2708/BCM2835 and Raspberry Pi   Stephen Warren
• [PATCH V3 2/5] ARM: bcm2708: add interrupt controller driver   Stephen Warren
• [PATCH V3 3/5] ARM: bcm2708: add system timer   Stephen Warren
• [PATCH V3 4/5] ARM: bcm2708: add stub clock driver   Stephen Warren
• [PATCH V3 5/5] ARM: bcm2708: instantiate console UART   Stephen Warren
• [PATCH 1/3] ARM: Remove bcmring NAND driver   Stephen Warren
• [PATCH 09/16] ARM: tegra: move platform_data definitions   Stephen Warren
• [PATCH] media: add V4L2 DT binding documentation   Stephen Warren
• [PATCH] ARM: smp_twd: reprogram twd based on clk notifier   Stephen Warren
• [PATCH] media: add V4L2 DT binding documentation   Stephen Warren
• [PATCH v3 6/9] ARM: mvebu: add pinctrl device in DT for Armada 370/XP SoCs   Stephen Warren
• [PATCH v3 1/9] pinctrl: mvebu: pinctrl driver core   Stephen Warren
• [PATCH] media: add V4L2 DT binding documentation   Stephen Warren
• [PATCH V3 2/5] ARM: bcm2708: add interrupt controller driver   Stephen Warren
• [PATCH V3 5/5] ARM: bcm2708: instantiate console UART   Stephen Warren
• [PATCH] arm: tegra: fixing compilation error   Stephen Warren
• [PATCH] ARM: Tegra: Add smp_twd clock for Tegra20   Stephen Warren
• [PATCH] pinctrl: document semantics vs GPIO   Stephen Warren
• [PATCH] ARM: Tegra: Add smp_twd clock for Tegra20   Stephen Warren
• [PATCH] ARM: Tegra: Add smp_twd clock for Tegra20   Stephen Warren
• [PATCH] ARM: Tegra: Add smp_twd clock for Tegra20   Stephen Warren
• [PATCH V3 1/5] ARM: add infra-structure for BCM2708/BCM2835 and Raspberry Pi   Stephen Warren
• [PATCH V3 2/5] ARM: bcm2708: add interrupt controller driver   Stephen Warren
• [PATCH V4 1/5] ARM: add infra-structure for BCM2835 and Raspberry Pi   Stephen Warren
• [PATCH V4 2/5] ARM: bcm2835: add interrupt controller driver   Stephen Warren
• [PATCH V4 3/5] ARM: bcm2835: add system timer   Stephen Warren
• [PATCH V4 4/5] ARM: bcm2835: add stub clock driver   Stephen Warren
• [PATCH V4 5/5] ARM: bcm2835: instantiate console UART   Stephen Warren
• [PATCH] arm: tegra: dt: Add pinmux entries for Vbus regulator controls   Stephen Warren
• [PATCH V4 1/5] ARM: add infra-structure for BCM2835 and Raspberry Pi   Stephen Warren
• [PATCH] pinctrl: document semantics vs GPIO   Stephen Warren
• [PATCH RESEND 1/5] ARM: tegra: config: enable dmaengine based APB DMA driver   Stephen Warren
• [PATCH RESEND 2/5] ARM: tegra: dma: remove legacy APB DMA driver   Stephen Warren
• [PATCH RESEND 3/5] ARM: tegra: apbio: remove support of legacy DMA driver based access   Stephen Warren
• [PATCH RESEND 4/5] spi: tegra: remove support of legacy DMA driver based access   Stephen Warren
• [PATCH RESEND 5/5] ASoC: tegra: remove support of legacy DMA driver based access   Stephen Warren
• [PATCH V4 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH v4 00/10] pinctrl: mvebu: pinctrl driver   Stephen Warren
• [PATCH v2] pinctrl: document semantics vs GPIO   Stephen Warren
• [GIT PULL 01/10] ARM: tegra: fixes for 3.7   Stephen Warren
• [GIT PULL 02/10] ARM: tegra: first round of cleanup   Stephen Warren
• [GIT PULL 03/10] ARM: tegra: remove board files   Stephen Warren
• [GIT PULL 04/10] ARM: tegra: switch to the common clock framework   Stephen Warren
• [GIT PULL 05/10] ARM: tegra: i2c driver enhancements mostly related to clocking   Stephen Warren
• [GIT PULL 06/10] ARM: tegra: implement CPU hotplug   Stephen Warren
• [GIT PULL 07/10] ARM: tegra: device tree changes   Stephen Warren
• [GIT PULL 08/10] ARM: tegra: second round of cleanups   Stephen Warren
• [GIT PULL 09/10] ARM: tegra: defconfig updates   Stephen Warren
• [GIT PULL 10/10] ARM: tegra: MAINTAINERS updates   Stephen Warren
• [PATCH v3 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Stephen Warren
• [PATCH v3 4/5] arm: mvebu: add DT information for GPIO banks on Armada 370 and XP   Stephen Warren
• [PATCH V6 1/2] of: Add generic device tree DMA helpers   Stephen Warren
• [PATCH V5 1/5] ARM: add infra-structure for BCM2835 and Raspberry Pi   Stephen Warren
• [PATCH V5 2/5] ARM: bcm2835: add interrupt controller driver   Stephen Warren
• [PATCH V5 3/5] ARM: bcm2835: add system timer   Stephen Warren
• [PATCH V5 4/5] ARM: bcm2835: add stub clock driver   Stephen Warren
• [PATCH V5 5/5] ARM: bcm2835: instantiate console UART   Stephen Warren
• [PATCH] MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture   Stephen Warren
• [PATCH V5 2/5] ARM: bcm2835: add interrupt controller driver   Stephen Warren
• [PATCH V5 2/5] ARM: bcm2835: add interrupt controller driver   Stephen Warren
• [GIT PULL] ARM: tegra: switch to dmaengine   Stephen Warren
• [PATCH] i2c: i2c-gpio: fix issue when DT node greater than 1   Stephen Warren
• [PATCH V6] ARM: bcm2835: add stub clock driver   Stephen Warren
• [PATCH] i2c: i2c-gpio: fix issue when DT node greater than 1   Stephen Warren
• [PATCH V6] ARM: bcm2835: add stub clock driver   Stephen Warren
• [PATCH] ARM: dt: tegra: whistler: configure power off   Stephen Warren
• [PATCH 1/5] ARM: tegra: define DT bindings for and instantiate timer   Stephen Warren
• [PATCH 2/5] ARM: tegra: define DT bindings for and instantiate RTC   Stephen Warren
• [PATCH 3/5] ARM: tegra: add TWD to device tree   Stephen Warren
• [PATCH 4/5] ARM: tegra: enhance timer.c to get information from device tree   Stephen Warren
• [PATCH 5/5] ARM: tegra: select SPARSE_IRQ   Stephen Warren
• [PATCH] ARM: tegra: move tegra-ahb.h out of arch/arm/mach-tegra/   Stephen Warren
• [GIT PULL] ARM: add basic BCM2835 SoC and Raspberry Pi board support   Stephen Warren
• [RFC 0/5] ARM: dma-mapping: New dma_map_ops to control IOVA more precisely   Stephen Warren
• [RFC 0/5] ARM: dma-mapping: New dma_map_ops to control IOVA more precisely   Stephen Warren
• [GIT PULL] ARM: tegra: second round of device tree changes   Stephen Warren
• [PATCH] ARM: tegra: harmony: fix ldo7 regulator-name   Stephen Warren
• [GIT PULL] ARM: add basic BCM2835 SoC and Raspberry Pi board support   Stephen Warren
• bcm2835: property mailbox or dedicated mailbox for upstream?   Stephen Warren
• bcm2835: device tree for mbox-driven devices in upstream   Stephen Warren
• [PATCH V6 2/2] video: drm: exynos: Add device tree support   Stephen Warren
• [PATCH] ARM: dtb: move all dtb targets to common Makefile   Stephen Warren
• [PATCH V6 2/2] video: drm: exynos: Add device tree support   Stephen Warren
• [PATCH v2 5/5] ARM: tegra: enable brcmfmac in defconfig   Stephen Warren
• [PATCH 2/3] i2c: mux: Add dt support to i2c-mux-gpio driver   Stephen Warren
• [RFC 0/6] pinctrl: samsung: Remove static platform-specific data   Stephen Warren
• [RFC 6/6] ARM: dts: exynos4210: Add platform-specific descriptions for pin controllers   Stephen Warren
• linux-next: Tree for Sept 24 (irqchip)   Stephen Warren
• [PATCH] irqchip: fill in empty Kconfig   Stephen Warren
• [RFC 0/6] pinctrl: samsung: Remove static platform-specific data   Stephen Warren
• [RFC 6/6] ARM: dts: exynos4210: Add platform-specific descriptions for pin controllers   Stephen Warren
• [PATCH v2 5/5] ARM: tegra: enable brcmfmac in defconfig   Stephen Warren
• [RFC 6/6] ARM: dts: exynos4210: Add platform-specific descriptions for pin controllers   Stephen Warren
• [PATCH 0/1] Fix segfault in DTC   Stephen Warren
• [RFC 6/6] ARM: dts: exynos4210: Add platform-specific descriptions for pin controllers   Stephen Warren
• [RFC 6/6] ARM: dts: exynos4210: Add platform-specific descriptions for pin controllers   Stephen Warren
• [RFC PATCH 0/3] ARM: use C pre-processor with dtc   Stephen Warren
• [RFC PATCH 1/3] kbuild: introduce cmd_dtc_cpp   Stephen Warren
• [RFC PATCH 2/3] ARM: use cmd_dtc_cpp for compilation of *.dts-cpp to *.dtb   Stephen Warren
• [RFC PATCH 3/3] ARM: tegra: compile all DT files with cpp   Stephen Warren
• [RFC PATCH 0/3] ARM: use C pre-processor with dtc   Stephen Warren
• [RFC PATCH 0/3] ARM: use C pre-processor with dtc   Stephen Warren
• [RFC PATCH 0/3] ARM: uncompress.h multi-platform enablement   Stephen Warren
• [RFC PATCH 1/3] ARM: move ICEDCC uncompress.h to common location   Stephen Warren
• [RFC PATCH 2/3] ARM: mvebu: restore uncompress.h   Stephen Warren
• [RFC PATCH 3/3] ARM: tegra: move debug macros to include/debug   Stephen Warren
• [RFC 6/6] ARM: dts: exynos4210: Add platform-specific descriptions for pin controllers   Stephen Warren
• [RFC PATCH 0/3] ARM: uncompress.h multi-platform enablement   Stephen Warren
• [PATCH] pinctrl: clarify idle vs sleep states   Stephen Warren
• [PATCH] pinctrl/nomadik: allocate IRQ descriptors dynamically   Stephen Warren
• [RFC PATCH 1/3] ARM: move ICEDCC uncompress.h to common location   Stephen Warren
• [PATCH V2] ASoC: SAMSUNG: Add DT support for i2s   Stephen Warren
• [RFC PATCH 0/3] ARM: use C pre-processor with dtc   Stephen Warren
• [RFC PATCH 1/3] kbuild: introduce cmd_dtc_cpp   Stephen Warren
• [RFC PATCH 2/3] ARM: use cmd_dtc_cpp for compilation of *.dts-cpp to *.dtb   Stephen Warren
• [PATCH] ARM: bcm2835: implement machine restart hook   Stephen Warren
• [PATCH 1/2] pinctrl: add bcm2835 driver   Stephen Warren
• [PATCH 2/2] ARM: bcm2835: enable GPIO/pinctrl   Stephen Warren
• [PATCH] ARM: bcm2835: implement machine restart hook   Stephen Warren
• [PATCH] ARM: bcm2835: implement machine restart hook   Stephen Warren
• [PATCH v2] pinctrl: clarify idle vs sleep states   Stephen Warren
• [PATCH 1/1] Fix segfault in DTC   Stephen Warren
• [PATCH 1/1] Fix segfault in DTC   Stephen Warren
• [PATCH 08/12] dtc: be more quiet with "make -s"   Stephen Warren
• [PATCH V2] ARM: bcm2835: implement machine restart hook   Stephen Warren
• GIC affinity and edge trigger   Barak Wasserstrom
• rcu self-detected stall messages on OMAP3, 4 boards   Frederic Weisbecker
• [PATCH v7 0/11] KGDB/KDB FIQ (NMI) debugger   Jason Wessel
• [PATCH 01/11] kernel/debug: Mask KGDB NMI upon entry   Jason Wessel
• [PATCH 02/11] kdb: Implement disable_nmi command   Jason Wessel
• [PATCH 07/11] tty/serial: Add kgdb_nmi driver   Jason Wessel
• [PATCH v7 0/11] KGDB/KDB FIQ (NMI) debugger   Jason Wessel
• [PATCH v8 0/11] KGDB/KDB FIQ (NMI) debugger   Jason Wessel
• [PATCH 07/11] tty/serial: Add kgdb_nmi driver   Jason Wessel
• [PATCH v8 0/11] KGDB/KDB FIQ (NMI) debugger   Jason Wessel
• [PATCH 09/12] tty/console: fix warnings in drivers/tty/serial/kgdboc.c   Jason Wessel
• [PATCH v4 02/24] xen/arm: hypercalls   Konrad Rzeszutek Wilk
• [PATCH v4 06/24] docs: Xen ARM DT bindings   Konrad Rzeszutek Wilk
• [PATCH v4 10/24] xen/arm: compile and run xenbus   Konrad Rzeszutek Wilk
• [PATCH v4 09/24] xen/arm: Introduce xen_ulong_t for unsigned long   Konrad Rzeszutek Wilk
• [PATCH v4 07/24] xen/arm: Xen detection and shared_info page mapping   Konrad Rzeszutek Wilk
• [PATCH v4 24/24] MAINTAINERS: add myself as Xen ARM maintainer   Konrad Rzeszutek Wilk
• [PATCH v4 14/24] xen/arm: initialize grant_table on ARM   Konrad Rzeszutek Wilk
• [PATCH v4 19/24] xen/arm: compile blkfront and blkback   Konrad Rzeszutek Wilk
• [PATCH v4 23/24] xen: update xen_add_to_physmap interface   Konrad Rzeszutek Wilk
• [PATCH v4 15/24] xen/arm: receive Xen events on ARM   Konrad Rzeszutek Wilk
• [PATCH v4 00/24] Introduce Xen support on ARM (based on 3.6-rc5)   Konrad Rzeszutek Wilk
• [PATCH v4 10/24] xen/arm: compile and run xenbus   Konrad Rzeszutek Wilk
• [PATCH v4 10/24] xen/arm: compile and run xenbus   Konrad Rzeszutek Wilk
• [PATCH v4 12/24] xen/arm: introduce CONFIG_XEN on ARM   Konrad Rzeszutek Wilk
• [PATCH v4 10/24] xen/arm: compile and run xenbus   Konrad Rzeszutek Wilk
• [PATCH v5 00/17] Introduce Xen support on ARM (based on 3.6-rc5)   Konrad Rzeszutek Wilk
• [PATCH v5 00/17] Introduce Xen support on ARM (based on 3.6-rc5)   Konrad Rzeszutek Wilk
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Konrad Rzeszutek Wilk
• [RFC PATCH 0/3] ARM: use C pre-processor with dtc   Scott Wood
• [RFC PATCH 0/3] ARM: use C pre-processor with dtc   Scott Wood
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Bryan Wu
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Bryan Wu
• [PATCH] ARM: OMAP: OMAP_DEBUG_LEDS needs to select LEDS_CLASS   Bryan Wu
• [PATCH] ARM: OMAP: OMAP_DEBUG_LEDS needs to select LEDS_CLASS   Bryan Wu
• [PATCH] ARM:CPUIDLE: Fix wrongly used idle control counter   Fan Wu
• [PATCH] ARM:CPUIDLE: Fix wrongly used idle control counter   Fan Wu
• [PATCH] ARM: Add BUG_ON when hlt counter is wrongly used   Fan Wu
• [PATCH] ARM: Add BUG_ON when hlt counter is wrongly used   Fan Wu
• [PATCH] ARM: Add BUG_ON when hlt counter is wrongly used   Fan Wu
• [PATCH] mtd: atmel_nand: fix the compile error which miss label "err_ecc_ioremap".   Josh Wu
• [PATCH] mtd: atmel_nand: fix the compile error which miss label "err_ecc_ioremap".   Josh Wu
• [PATCH v2] mtd: atmel_nand: fix the compile error which miss label "err_ecc_ioremap".   Josh Wu
• [PATCH] ARM: at91/tc: fix typo in the DT document   Josh Wu
• [PATCH v2] mtd: atmel_nand: fix the compile error which miss label "err_ecc_ioremap".   Josh Wu
• [PATCH v2] mtd: atmel_nand: fix the compile error which miss label "err_ecc_ioremap".   Josh Wu
• [PATCH v3 0/3] Add a generic cpufreq-cpu0 driver   Rafael J. Wysocki
• [PATCH v3 3/3] cpufreq: Add a generic cpufreq-cpu0 driver   Rafael J. Wysocki
• [PATCH v3 1/3] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Rafael J. Wysocki
• [PATCH v3 2/3] PM / OPP: Initialize OPP table from device tree   Rafael J. Wysocki
• [PATCH v3 3/3] cpufreq: Add a generic cpufreq-cpu0 driver   Rafael J. Wysocki
• [PATCH v3 3/3] cpufreq: Add a generic cpufreq-cpu0 driver   Rafael J. Wysocki
• [PATCH v3 3/3] cpufreq: Add a generic cpufreq-cpu0 driver   Rafael J. Wysocki
• [PATCH] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp   Rafael J. Wysocki
• [PATCH] cpufreq: add helper function cpufreq_set_target()   Rafael J. Wysocki
• [PATCH v4] cpufreq: Add a generic cpufreq-cpu0 driver   Rafael J. Wysocki
• [PATCH] cpufreq: add helper function cpufreq_set_target()   Rafael J. Wysocki
• [PATCH] cpufreq: add helper function cpufreq_set_target()   Rafael J. Wysocki
• [PATCH] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp   Rafael J. Wysocki
• [PATCH] CPUFreq: OMAP: remove unnecessary plat/ includes   Rafael J. Wysocki
• [PATCH] CPUFreq: OMAP: remove unnecessary plat/ includes   Rafael J. Wysocki
• [PATCH v2] PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled   Rafael J. Wysocki
• [PATCH v2] PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled   Rafael J. Wysocki
• [PATCH V5 0/5] clk: mmp: add clock framework for mmp   Chao Xie
• [PATCH] ARM: suspend: use flush range instead of flush all   Raul Xiong
• [PATCH v2 1/2] hw_random: mxc-rnga: Adapt clocks to new i.mx clock framework   Herbert Xu
• [PATCH 0/6] atmel SoC SPI controller with DT   Wenyou Yang
• [PATCH 1/6] of_spi: add generic binding support to specify cs gpio   Wenyou Yang
• [PATCH 2/6] spi: atmel: add dmaengine and dt support   Wenyou Yang
• [PATCH 3/6] ARM: at91: add clocks for spi DT entries   Wenyou Yang
• [PATCH 4/6] ARM: dts: add spi nodes for atmel SoCs   Wenyou Yang
• [PATCH 5/6] ARM: dts: add spi nodes for atmel boards   Wenyou Yang
• [PATCH 6/6] spi: atmel: add dt property for DMA configuration for sam9x5 and sam9n12   Wenyou Yang
• [PATCH 1/3] [media] omap3isp: Fix compilation error in ispreg.h   Ido Yariv
• [PATCH 2/3] iommu/omap: Merge iommu2.h into iommu.h   Ido Yariv
• [PATCH 3/3] arm: omap: Move iommu/iovmm headers to platform_data   Ido Yariv
• [PATCH 2/3] iommu/omap: Merge iommu2.h into iommu.h   Ido Yariv
• [PATCH] arm: make FORCE_MAX_ZONEORDER configurable for TI AM33XX   Yegor Yefremov
• [PATCH] arm: make FORCE_MAX_ZONEORDER configurable for TI AM33XX   Yegor Yefremov
• [PATCH] arm: make FORCE_MAX_ZONEORDER configurable for TI AM33XX   Yegor Yefremov
• [PATCH v2] arm: make FORCE_MAX_ZONEORDER configurable for TI AM33XX   Yegor Yefremov
• [PATCH] gpio/omap: fix possible memory leak in omap2_gpio_dev_init()   Wei Yongjun
• [PATCH v2] gpio/omap: fix possible memory leak in omap2_gpio_dev_init()   Wei Yongjun
• [PATCH] [ARM] msm: dma: use list_move_tail instead of list_del/list_add_tail   Wei Yongjun
• [PATCH] ARM: davinci: dm644x: move the dereference below the NULL test   Wei Yongjun
• [PATCH] ARM: at91/gpio: using for_each_set_bit to simplify the code   Wei Yongjun
• [PATCH] ARM: mmp: using for_each_set_bit to simplify the code   Wei Yongjun
• [PATCH] davinci: fix return value check by using IS_ERR in tnetv107x_devices_init()   Wei Yongjun
• [PATCH] ARM: imx: fix the return value check in imx_clk_busy_divider()   Wei Yongjun
• [PATCH] msm: clock: fix return value check in msm_clock_init()   Wei Yongjun
• [PATCH] ARM: OMAP: fix return value check in beagle_opp_init()   Wei Yongjun
• [PATCH] OMAPDSS: fix return value check in create_dss_pdev()   Wei Yongjun
• [PATCH] ARM: OMAP: hsmmc: fix return value check in omap_hsmmc_init_one()   Wei Yongjun
• [PATCH] ARM: OMAP: omap_device: fix return value check in omap_device_build_ss()   Wei Yongjun
• [PATCH] clk: fix return value check in of_fixed_clk_setup()   Wei Yongjun
• [PATCH] ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe()   Wei Yongjun
• [PATCH] ARM: imx: fix return value check in imx3_init_l2x0()   Wei Yongjun
• [PATCH] ARM: OMAP2+: SmartReflex: fix return value check in sr_dev_init()   Wei Yongjun
• [PATCH] ARM: OMAP2+: PM: fix return value check in omap2_set_init_voltage()   Wei Yongjun
• [PATCH v2 0/9] Add device tree support for on-chip SRAM   Philipp Zabel
• [PATCH v3 0/4] Add device tree support for on-chip SRAM   Philipp Zabel
• [PATCH v3 1/4] genalloc: add a global pool list, allow to find pools by phys address   Philipp Zabel
• [PATCH v3 2/4] misc: Generic on-chip SRAM allocation driver   Philipp Zabel
• [PATCH v3 3/4] ARM: dts: add sram for imx53 and imx6q   Philipp Zabel
• [PATCH v3 4/4] ARM i.MX: remove IRAM_ALLOC facility   Philipp Zabel
• [PATCH v4 0/6] Add device tree support for on-chip SRAM   Philipp Zabel
• [PATCH v4 1/6] genalloc: add a global pool list, allow to find pools by phys address   Philipp Zabel
• [PATCH v4 2/6] misc: Generic on-chip SRAM allocation driver   Philipp Zabel
• [PATCH v4 3/6] ARM: dts: add sram for imx53 and imx6q   Philipp Zabel
• [PATCH v4 4/6] ARM i.MX: remove IRAM_ALLOC facility   Philipp Zabel
• [PATCH v4 5/6] misc: sram: Add optional clock   Philipp Zabel
• [PATCH v4 6/6] ARM i.MX6q: Add ocram clkdev entry   Philipp Zabel
• triggering an gpio-irq on both edges   Philipp Zabel
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Richard Zhao
• [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed   Richard Zhao
• [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed   Richard Zhao
• [PATCH v7] ARM: dts: imx6q-sabrelite: add usbmisc device   Richard Zhao
• [PATCH v2 06/11] USB: mxs-phy: add basic otg support   Richard Zhao
• [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed   Richard Zhao
• [PATCH v2 06/11] USB: mxs-phy: add basic otg support   Richard Zhao
• [PATCH] USB: chipidea: use OTGSC_BSV to detect vbus valid   Richard Zhao
• [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed   Richard Zhao
• [PATCH v3] USB: mxs-phy: add basic otg support   Richard Zhao
• [PATCH] ARM: dts: imx6q-sabrelite: add usbotg pinctrl support   Richard Zhao
• [PATCH v3] USB: mxs-phy: add basic otg support   Richard Zhao
• [PATCH] USB: chipidea: use OTGSC_BSV to detect vbus valid   Richard Zhao
• [PATCH v2 RESEND] USB: chipidea: convert to use devm_request_irq   Richard Zhao
• [PATCH v2 10/11] USB: chipidea: add set_vbus_power support   Richard Zhao
• [PATCH v2 RESEND] USB: chipidea: convert to use devm_request_irq   Richard Zhao
• [PATCH 02/10] gpio: pxa: add explicit includes for cpu_is_X macros   Haojian Zhuang
• [PATCH 02/10] gpio: pxa: add explicit includes for cpu_is_X macros   Haojian Zhuang
• [GIT PULL][for 3.7] pull request of clk branch in arch-pxa git tree   Haojian Zhuang
• [GIT PULL][for 3.7] pull requst of board branch in arch pxa   Haojian Zhuang
• [PATCH V5 0/5] clk: mmp: add clock framework for mmp   Haojian Zhuang
• [V3 1/4] regulator: 88pm860x: add pre-regulator support for 88pm860x regulator   Haojian Zhuang
• [V4 3/4] power_supply: Enable battery-charger for 88pm860x   Haojian Zhuang
• [PATCH v5 3/3] ARM: dt: mmp-dma: add binding file   Haojian Zhuang
• [V4 3/4] power_supply: Enable battery-charger for 88pm860x   Haojian Zhuang
• [PATCH] ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe()   Haojian Zhuang
• [PATCH v5 3/3] ARM: dt: mmp-dma: add binding file   Haojian Zhuang
• [PATCH] ARM: mmp: using for_each_set_bit to simplify the code   Haojian Zhuang
• [GIT PULL][for 3.7] pull request on board branch from arch-pxa   Haojian Zhuang
• [GIT PULL][for 3.7] pull request on dt2 branch from arch-pxa   Haojian Zhuang
• [GIT PULL][for 3.6] pull request on fixes branch from arch-pxa   Haojian Zhuang
• [GIT PULL][for 3.7] pull request on dt2 branch from arch-pxa   Haojian Zhuang
• [GIT PULL][for 3.6] pull request on fixes branch from arch-pxa   Haojian Zhuang
• [PATCH v2] ARM: pxa2xx: Remove EXPERIMENTAL dependency from spi-pxa2xx driver   Haojian Zhuang
• [PATCH v4 0/5] ARM: topology: set the capacity of each cores for big.LITTLE   Peter Zijlstra
• [PATCH v3 1/2] ARM: arch_timers: enable the use of the virtual timer   Marc Zyngier
• [PATCH v4 0/2] arch_timers patches to enable KVM support   Marc Zyngier
• [PATCH v4 1/2] ARM: arch_timers: enable the use of the virtual timer   Marc Zyngier
• [PATCH v4 2/2] ARM: arch_timers: register a time/cycle counter   Marc Zyngier
• [PATCH v2 0/7] Allow the kernel to be booted in HYP mode   Marc Zyngier
• [PATCH v2 1/7] ARM: opcodes: add __ERET/__MSR_ELR_HYP instruction encoding   Marc Zyngier
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Marc Zyngier
• [PATCH v2 3/7] ARM: zImage/virt: hyp mode entry support for the zImage loader   Marc Zyngier
• [PATCH v2 4/7] ARM: virt: Update documentation for hyp mode entry support   Marc Zyngier
• [PATCH v2 5/7] ARM: virt: Add boot-time diagnostics   Marc Zyngier
• [PATCH v2 6/7] ARM: virt: Add CONFIG_ARM_VIRT_EXT option   Marc Zyngier
• [PATCH v2 7/7] ARM: virt: arch_timers: enable access to physical timers   Marc Zyngier
• [PATCH v4 1/2] ARM: arch_timers: enable the use of the virtual timer   Marc Zyngier
• [PATCH v9 00/13] Per sub-architecture SMP operations   Marc Zyngier
• [PATCH v2] ARM: perf: add guest vs host discrimination   Marc Zyngier
• [PATCH v4 02/24] xen/arm: hypercalls   Marc Zyngier
• [PATCH v4 16/24] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST   Marc Zyngier
• [PATCH v4 02/24] xen/arm: hypercalls   Marc Zyngier
• [PATCH v4 16/24] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST   Marc Zyngier
• [PATCH v4 16/24] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST   Marc Zyngier
• Stable branch for 3.7?   Marc Zyngier
• [PULL] HYP-mode boot   Marc Zyngier
• [PATCH 01/15] ARM: add mem_type prot_pte accessor   Marc Zyngier
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Marc Zyngier
• [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines   Marc Zyngier
• [PATCH 01/10] ARM: KVM: Keep track of currently running vcpus   Marc Zyngier
• [RESEND PATCH 0/3] New algorithm for ASID allocation and rollover   Marc Zyngier
• GIC affinity and edge trigger   Marc Zyngier
• [kvmarm] [PATCH 10/15] KVM: ARM: World-switch implementation   Marc Zyngier
• [PULL] HYP-mode boot   Marc Zyngier
• [PATCH 06/15] KVM: ARM: Initial skeleton to compile KVM support   Marc Zyngier
• [kvmarm] [PATCH 13/15] KVM: ARM: Handle guest faults in KVM   Marc Zyngier
• [PATCH v2 RESEND 2/2] ARM: local timers: add timer support using IO mapped register   Marc Zyngier
• [PATCH v2 0/8] i2c: at91: cleanup and dt support   ludovic.desroches at atmel.com
• [PATCH v2 1/8] i2c: at91: use managed resources   ludovic.desroches at atmel.com
• [PATCH v2 2/8] i2c: at91: add warning about transmission issues for some devices   ludovic.desroches at atmel.com
• [PATCH v2 3/8] i2c: at91: use an id table for SoC dependent parameters   ludovic.desroches at atmel.com
• [PATCH v2 4/8] ARM: at91: do not configure at91sam9g10 twi pio as open-drain   ludovic.desroches at atmel.com
• [PATCH v2 5/8] i2c: at91: add dt support to i2c-at91   ludovic.desroches at atmel.com
• [PATCH v2 6/8] ARM: at91: add clocks for I2C DT entries   ludovic.desroches at atmel.com
• [PATCH v2 7/8] ARM: dts: add twi nodes for atmel SoCs   ludovic.desroches at atmel.com
• [PATCH v2 8/8] ARM: dts: add twi nodes for atmel boards   ludovic.desroches at atmel.com
• [PATCH v3 0/8] i2c: at91: cleanup and dt support   ludovic.desroches at atmel.com
• [PATCH v3 1/8] i2c: at91: use managed resources   ludovic.desroches at atmel.com
• [PATCH v3 2/8] i2c: at91: add warning about transmission issues for some devices   ludovic.desroches at atmel.com
• [PATCH v3 3/8] i2c: at91: use an id table for SoC dependent parameters   ludovic.desroches at atmel.com
• [PATCH v3 4/8] ARM: at91: do not configure at91sam9g10 twi pio as open-drain   ludovic.desroches at atmel.com
• [PATCH v3 5/8] i2c: at91: add dt support to i2c-at91   ludovic.desroches at atmel.com
• [PATCH v3 6/8] ARM: at91: add clocks for I2C DT entries   ludovic.desroches at atmel.com
• [PATCH v3 7/8] ARM: dts: add twi nodes for atmel SoCs   ludovic.desroches at atmel.com
• [PATCH v3 8/8] ARM: dts: add twi nodes for atmel boards   ludovic.desroches at atmel.com
• [RFC PATCH] i2c: at91: add dma support   ludovic.desroches at atmel.com
• [RFC PATCH] i2c: at91: add dma support   ludovic.desroches at atmel.com
• [PATCH v2] hvc_dcc : add support to armv4 and armv5 core   matthieu castet
• dead code in arch/arm/common/scoop.c   devendra.aaru
• [PATCH v4 0/2] dmaengine: add support mmp-pdma   zhangfei gao
• [PATCH v2] arm: make FORCE_MAX_ZONEORDER configurable for TI AM33XX   yegorslists at googlemail.com
• [PATCH] arm: increase FORCE_MAX_ZONEORDER for TI AM33XX   yegorslists at googlemail.com
• [GIT PULL] SPEAr pinctrl updates for v-3.5   shiraz hashim
• [PATCH] arch/arm/mach-s3c24xx/mach-h1940.c: delete double assignment   kgene at kernel.org
• [PATCH 9/15] arch/arm/mach-s3c24xx/mach-h1940.c: removes unnecessary semicolon   kgene at kernel.org
• [PATCH 16/16] ARM: spear: move platform_data definitions   viresh kumar
• [PATCH v9 11/13] ARM: SoC: convert spear13xx to SoC descriptor   viresh kumar
• [PATCH] spi: pl022: Add clk_{un}prepare() support in runtime PM   viresh kumar
• [PATCH] spi: pl022: Add clk_{un}prepare() support in runtime PM   viresh kumar
• [PATCH] spi: pl022: Add clk_{un}prepare() support in runtime PM   viresh kumar
• [PATCH 1/2] spi:pl022: Disable/Enable functional clock from suspend/resume   viresh kumar
• [PATCH 3/8] i2c: at91: use an id table for SoC dependent parameters   ludovic.desroches
• [PATCH v3 0/8] i2c: at91: cleanup and dt support   ludovic.desroches
• [PATCH v2 2/2] mmc: atmel-mci: AP700x PDC is not connected to MCI   ludovic.desroches
• i2c_transfer using 8bit register address   mahalakshmi.m
• 8bit i2c register address   mahalakshmi.m
• [PATCH] ARM: OMAP: SmartReflex: pass device dependent data via platform data   jean.pihet at newoldbits.com
• [PATCH] ARM: OMAP: SmartReflex: fix error path in init function   jean.pihet at newoldbits.com
• [PATCH] ARM: OMAP: SmartReflex: select CONFIG_POWER_SUPPLY in Kconfig   jean.pihet at newoldbits.com
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   popcornmix
• [PATCH] ARM: add support for BCM2708/BCM2835 and Raspberry Pi   popcornmix
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   sebastien requiem
• [PATCH 1/3] Revert "spi/pl022: fix spi-pl022 pm enable at probe"   vipul kumar samar
• [PATCH 2/3] Revert "spi/pl022: enable runtime PM"   vipul kumar samar
• [PATCH] ARM: ks8695: add board support for the SnapGear boards based on the KS8695   gerg at snapgear.com
• [PATCH] ARM: ks8695: add board support for the OpenGear boards based on the KS8695   gerg at snapgear.com
• [PATCH] ARM: ixp4xx: move fixed mapping of internal devices into vmalloc region   gerg at snapgear.com
• [PATCH] ARM: add back in KS8695 based SnapGear board entries   gerg at snapgear.com
• [PATCH] ARM: add back in KS8695 based OpenGear board entries   gerg at snapgear.com
• [PATCH 07/16] ARM: pxa: move platform_data definitions   stefan at sostec.de
• ARM: smp: why don't eliminate warning "Unknown IPI message 0x1"?   steve.zhan
• Fwd: PXA270 flash   Takács Áron
• Fwd: PXA270 flash   Takács Áron
• ARM: smp: why don't eliminate warning "Unknown IPI message 0x1"?   湛振波