[PATCH] ARM: add v7 multi-platform defconfig
Rob Herring
robherring2 at gmail.com
Thu Sep 27 15:39:25 EDT 2012
From: Rob Herring <rob.herring at calxeda.com>
Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress
platforms and their drivers. Most other options are left to the default.
The existing individual platform defconfigs are kept for now as they are
a bit different. In some cases, the choices look pretty arbitrary and
just copied from other defconfigs.
Signed-off-by: Rob Herring <rob.herring at calxeda.com>
Cc: Jason Cooper <jason at lakedaemon.net>
Cc: Andrew Lunn <andrew at lunn.ch>
Cc: Gregory Clement <gregory.clement at free-electrons.com>
Cc: Dinh Nguyen <dinguyen at altera.com>
Cc: Pawel Moll <pawel.moll at arm.com>
---
I'm not sure I have all needed drivers enabled for all platforms, so please
test and give feedback on other drivers that should be enabled.
There's a couple of fixes needed to build. The branch is available here:
git://sources.calxeda.com/kernel/linux.git defconfig
Rob
arch/arm/configs/multi_v7_defconfig | 57 +++++++++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 arch/arm/configs/multi_v7_defconfig
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
new file mode 100644
index 0000000..159f75f
--- /dev/null
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -0,0 +1,57 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_XP=y
+CONFIG_ARCH_HIGHBANK=y
+CONFIG_ARCH_SOCFPGA=y
+# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_SMP=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_NET=y
+CONFIG_ATA=y
+CONFIG_SATA_HIGHBANK=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=y
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_IPMI_HANDLER=y
+CONFIG_IPMI_SI=y
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIOLIB=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_USB=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_HIGHBANK_MC=y
+CONFIG_EDAC_HIGHBANK_L2=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_DMADEVICES=y
+CONFIG_PL330_DMA=y
--
1.7.9.5
More information about the linux-arm-kernel
mailing list