[PATCH 2/4] can: c_can: Add d_can raminit support
Marc Kleine-Budde
mkl at pengutronix.de
Mon Sep 3 16:39:15 EDT 2012
On 09/03/2012 01:52 PM, AnilKumar Ch wrote:
> Add D_CAN raminit support to C_CAN driver to enable D_CAN RAM.
> DCAN RAM holds all the message objects during transmission or
> receiving of data. This initialization/de-initialization should
> be done in synchronous with D_CAN clock.
>
> Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
> ---
> drivers/net/can/c_can/c_can.c | 13 ++++++++++++
> drivers/net/can/c_can/c_can.h | 2 ++
> drivers/net/can/c_can/c_can_platform.c | 10 +++++++++
> include/linux/can/platform/c_can.h | 36 ++++++++++++++++++++++++++++++++
> 4 files changed, 61 insertions(+)
> create mode 100644 include/linux/can/platform/c_can.h
>
> diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
> index aa6c5eb..c175410 100644
> --- a/drivers/net/can/c_can/c_can.c
> +++ b/drivers/net/can/c_can/c_can.c
> @@ -214,6 +214,12 @@ static inline void c_can_pm_runtime_put_sync(const struct c_can_priv *priv)
> pm_runtime_put_sync(priv->device);
> }
>
> +static inline void c_can_reset_ram(const struct c_can_priv *priv, bool enable)
> +{
> + if (priv->ram_init)
> + priv->ram_init(priv->instance, enable);
> +}
> +
> static inline int get_tx_next_msg_obj(const struct c_can_priv *priv)
> {
> return (priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) +
> @@ -1071,6 +1077,8 @@ static int c_can_open(struct net_device *dev)
> struct c_can_priv *priv = netdev_priv(dev);
>
> c_can_pm_runtime_get_sync(priv);
> + /* Initialize DCAN RAM */
> + c_can_reset_ram(priv, true);
>
> /* open the can device */
> err = open_candev(dev);
> @@ -1099,6 +1107,8 @@ static int c_can_open(struct net_device *dev)
> exit_irq_fail:
> close_candev(dev);
> exit_open_fail:
> + /* De-Initialize DCAN RAM */
> + c_can_reset_ram(priv, false);
> c_can_pm_runtime_put_sync(priv);
> return err;
> }
> @@ -1112,6 +1122,9 @@ static int c_can_close(struct net_device *dev)
> c_can_stop(dev);
> free_irq(dev->irq, dev);
> close_candev(dev);
> +
> + /* De-Initialize DCAN RAM */
> + c_can_reset_ram(priv, false);
> c_can_pm_runtime_put_sync(priv);
>
> return 0;
> diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
> index 1437a6d..5f6339c 100644
> --- a/drivers/net/can/c_can/c_can.h
> +++ b/drivers/net/can/c_can/c_can.h
> @@ -166,6 +166,8 @@ struct c_can_priv {
> unsigned int tx_echo;
> void *priv; /* for board-specific data */
> u16 irqstatus;
> + unsigned int instance;
> + void (*ram_init) (unsigned int instance, bool enable);
> };
>
> struct net_device *alloc_c_can_dev(void);
> diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
> index c351975..c6963b2 100644
> --- a/drivers/net/can/c_can/c_can_platform.c
> +++ b/drivers/net/can/c_can/c_can_platform.c
> @@ -34,6 +34,7 @@
> #include <linux/of_device.h>
> #include <linux/pm_runtime.h>
> #include <linux/pinctrl/consumer.h>
> +#include <linux/can/platform/c_can.h>
>
> #include <linux/can/dev.h>
>
> @@ -98,6 +99,7 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
> struct net_device *dev;
> struct c_can_priv *priv;
> const struct of_device_id *match;
> + struct c_can_platform_data *pdata = NULL;
> const struct platform_device_id *id;
> struct pinctrl *pinctrl;
> struct resource *mem;
> @@ -179,6 +181,14 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
> priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
> priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
> priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
> + pdata = pdev->dev.platform_data;
> + if (!pdata) {
> + dev_err(&pdev->dev, "d_can platform data missing\n");
> + ret = -EINVAL;
Is the ram_init mandatory on all d_can? There might be non omap d_can users.
Marc
> + goto exit_free_device;
> + }
> + priv->ram_init = pdata->ram_init;
> + priv->instance = pdata->instance;
> break;
> default:
> ret = -EINVAL;
> diff --git a/include/linux/can/platform/c_can.h b/include/linux/can/platform/c_can.h
> new file mode 100644
> index 0000000..84b27d2
> --- /dev/null
> +++ b/include/linux/can/platform/c_can.h
> @@ -0,0 +1,36 @@
> +/*
> + * C_CAN controller driver platform header
> + *
> + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * Bosch C_CAN/D_CAN controller is compliant to CAN protocol version 2.0
> + * part A and B.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __CAN_PLATFORM_C_CAN_H__
> +#define __CAN_PLATFORM_C_CAN_H__
> +
> +/**
> + * struct c_can_platform_data - C_CAN/D_CAN Platform Data
> + *
> + * @instance: CAN instance, required for d_can raminit
> + * @ram_init: CAN RAM initialization
> + *
> + * Platform data structure to get all platform specific settings.
> + * this structure also accounts the fact that the IP may have different
> + * RAM for different SOC's
> + */
> +struct c_can_platform_data {
> + unsigned int instance;
> + void (*ram_init) (unsigned int instance, bool enable);
> +};
> +#endif
>
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 259 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120903/4f9a8eb4/attachment.sig>
More information about the linux-arm-kernel
mailing list